-{-# OPTIONS -W -fno-warn-incomplete-patterns #-}
+{-# OPTIONS -fno-warn-incomplete-patterns #-}
-----------------------------------------------------------------------------
--- $Id: Main.hs,v 1.4 2000/10/11 15:26:18 simonmar Exp $
+-- $Id: Main.hs,v 1.41 2000/12/20 10:33:25 simonmar Exp $
--
-- GHC Driver program
--
#include "HsVersions.h"
+
+#ifdef GHCI
+import Interpreter
+import InteractiveUI
+#endif
+
+#ifndef mingw32_TARGET_OS
+import Dynamic
+import Posix
+#endif
+
+import CompManager
import DriverPipeline
import DriverState
import DriverFlags
import DriverMkDepend
import DriverUtil
+import Panic
+import DriverPhases ( Phase(..) )
+import CmdLineOpts ( HscLang(..), DynFlags(..), v_Static_hsc_opts )
import TmpFiles
+import Finder ( initFinder )
+import CmStaticInfo
import Config
import Util
-import Panic
+
+
import Concurrent
-#ifndef mingw32_TARGET_OS
-import Posix
-#endif
import Directory
import IOExts
import Exception
-import Dynamic
import IO
import Monad
import System
import Maybe
+
-----------------------------------------------------------------------------
-- Changes:
-----------------------------------------------------------------------------
-- ToDo:
+-- -nohi doesn't work
-- new mkdependHS doesn't support all the options that the old one did (-X et al.)
-- time commands when run with -v
-- split marker
-- reading the package configuration file is too slow
-- -H, -K, -Rghc-timing
-- hi-diffs
+-- -ddump-all doesn't do anything
-----------------------------------------------------------------------------
-- Differences vs. old driver:
-- No more "Enter your Haskell program, end with ^D (on a line of its own):"
-- consistency checking removed (may do this properly later)
-- removed -noC
--- no hi diffs (could be added later)
-- no -Ofile
-----------------------------------------------------------------------------
-- Main loop
main =
+ -- top-level exception handler: any unrecognised exception is a compiler bug.
+ handle (\exception -> do hPutStr stderr (show (Panic (show exception)))
+ exitWith (ExitFailure 1)
+ ) $ do
+
-- all error messages are propagated as exceptions
handleDyn (\dyn -> case dyn of
PhaseFailed _phase code -> exitWith code
Interrupted -> exitWith (ExitFailure 1)
- _ -> do hPutStrLn stderr (show (dyn :: BarfKind))
+ _ -> do hPutStrLn stderr (show (dyn :: GhcException))
exitWith (ExitFailure 1)
- ) $ do
+ ) $ do
-- make sure we clean up after ourselves
- later (do forget_it <- readIORef keep_tmp_files
+ later (do forget_it <- readIORef v_Keep_tmp_files
unless forget_it $ do
- verb <- readIORef verbose
- cleanTempFiles verb
+ verb <- dynFlag verbosity
+ cleanTempFiles (verb >= 2)
) $ do
-- exceptions will be blocked while we clean the temporary files,
-- so there shouldn't be any difficulty if we receive further
-- install signal handlers
main_thread <- myThreadId
-
#ifndef mingw32_TARGET_OS
let sig_handler = Catch (throwTo main_thread
(DynException (toDyn Interrupted)))
installHandler sigINT sig_handler Nothing
#endif
- pgm <- getProgName
- writeIORef prog_name pgm
-
argv <- getArgs
-- grab any -B options from the command line first
argv' <- setTopDir argv
- top_dir <- readIORef topDir
+ top_dir <- readIORef v_TopDir
- let installed s = top_dir ++ s
+ let installed s = top_dir ++ '/':s
inplace s = top_dir ++ '/':cCURRENT_DIR ++ '/':s
installed_pkgconfig = installed ("package.conf")
am_installed <- doesFileExist installed_pkgconfig
if am_installed
- then writeIORef path_package_config installed_pkgconfig
+ then writeIORef v_Path_package_config installed_pkgconfig
else do am_inplace <- doesFileExist inplace_pkgconfig
if am_inplace
- then writeIORef path_package_config inplace_pkgconfig
+ then writeIORef v_Path_package_config inplace_pkgconfig
else throwDyn (OtherError "can't find package.conf")
-- set the location of our various files
if am_installed
- then do writeIORef path_usage (installed "ghc-usage.txt")
- writeIORef pgm_L (installed "unlit")
- writeIORef pgm_C (installed "hsc")
- writeIORef pgm_m (installed "ghc-asm")
- writeIORef pgm_s (installed "ghc-split")
-
- else do writeIORef path_usage (inplace (cGHC_DRIVER_DIR ++ "/ghc-usage.txt"))
- writeIORef pgm_L (inplace cGHC_UNLIT)
- writeIORef pgm_C (inplace cGHC_HSC)
- writeIORef pgm_m (inplace cGHC_MANGLER)
- writeIORef pgm_s (inplace cGHC_SPLIT)
+ then do writeIORef v_Path_usage (installed "ghc-usage.txt")
+ writeIORef v_Pgm_L (installed "unlit")
+ writeIORef v_Pgm_m (installed "ghc-asm")
+ writeIORef v_Pgm_s (installed "ghc-split")
+
+ else do writeIORef v_Path_usage (inplace (cGHC_DRIVER_DIR ++ "/ghc-usage.txt"))
+ writeIORef v_Pgm_L (inplace cGHC_UNLIT)
+ writeIORef v_Pgm_m (inplace cGHC_MANGLER)
+ writeIORef v_Pgm_s (inplace cGHC_SPLIT)
-- read the package configuration
- conf_file <- readIORef path_package_config
+ conf_file <- readIORef v_Path_package_config
contents <- readFile conf_file
- writeIORef package_details (read contents)
+ let pkg_details = read contents -- ToDo: faster
+ writeIORef v_Package_details pkg_details
-- find the phase to stop after (i.e. -E, -C, -c, -S flags)
(flags2, mode, stop_flag) <- getGhcMode argv'
-- find the build tag, and re-process the build-specific options
more_opts <- findBuildTag
- _ <- processArgs static_flags more_opts []
-
+ way_non_static <- processArgs static_flags more_opts []
+
-- give the static flags to hsc
- build_hsc_opts
+ static_opts <- buildStaticHscOpts
+ writeIORef v_Static_hsc_opts static_opts
+
+ -- warnings
+ warn_level <- readIORef v_Warning_opt
+
+ let warn_opts = case warn_level of
+ W_default -> standardWarnings
+ W_ -> minusWOpts
+ W_all -> minusWallOpts
+ W_not -> []
+
+ -- build the default DynFlags (these may be adjusted on a per
+ -- module basis by OPTIONS pragmas and settings in the interpreter).
+
+ core_todo <- buildCoreToDo
+ stg_todo <- buildStgToDo
+
+ -- set the "global" HscLang. The HscLang can be further adjusted on a module
+ -- by module basis, using only the -fvia-C and -fasm flags. If the global
+ -- HscLang is not HscC or HscAsm, -fvia-C and -fasm have no effect.
+ opt_level <- readIORef v_OptLevel
+ let lang = case mode of
+ StopBefore HCc -> HscC
+ DoInteractive -> HscInterpreted
+ _other | opt_level >= 1 -> HscC -- -O implies -fvia-C
+ | otherwise -> defaultHscLang
+
+ writeIORef v_DynFlags
+ DynFlags{ coreToDo = core_todo,
+ stgToDo = stg_todo,
+ hscLang = lang,
+ -- leave out hscOutName for now
+ hscOutName = panic "Main.main:hscOutName not set",
+
+ verbosity = case mode of
+ DoInteractive -> 1
+ DoMake -> 1
+ _other -> 0,
+
+ flags = [] }
-- the rest of the arguments are "dynamic"
- srcs <- processArgs dynamic_flags non_static []
+ srcs <- processArgs dynamic_flags (way_non_static ++
+ non_static ++ warn_opts) []
+ -- save the "initial DynFlags" away
+ init_dyn_flags <- readIORef v_DynFlags
+ writeIORef v_InitDynFlags init_dyn_flags
-- complain about any unknown flags
- let unknown_flags = [ f | ('-':f) <- srcs ]
- mapM unknownFlagErr unknown_flags
+ mapM unknownFlagErr [ f | f@('-':_) <- srcs ]
+
+ -- save the flag state, because this could be modified by OPTIONS
+ -- pragmas during the compilation, and we'll need to restore it
+ -- before starting the next compilation.
+ saved_driver_state <- readIORef v_Driver_state
+ writeIORef v_InitDriverState saved_driver_state
+
+ verb <- dynFlag verbosity
- -- get the -v flag
- verb <- readIORef verbose
+ when (verb >= 2)
+ (do hPutStr stderr "Glasgow Haskell Compiler, Version "
+ hPutStr stderr cProjectVersion
+ hPutStr stderr ", for Haskell 98, compiled by GHC version "
+ hPutStrLn stderr cBooterVersion)
- when verb (do hPutStr stderr "Glasgow Haskell Compiler, Version "
- hPutStr stderr version_str
- hPutStr stderr ", for Haskell 98, compiled by GHC version "
- hPutStrLn stderr booter_version)
+ when (verb >= 2)
+ (hPutStrLn stderr ("Using package config file: " ++ conf_file))
- when verb (hPutStrLn stderr ("Using package config file: " ++ conf_file))
+ -- initialise the finder
+ pkg_avails <- getPackageInfo
+ initFinder pkg_avails
-- mkdependHS is special
when (mode == DoMkDependHS) beginMkDependHS
- -- make is special
- when (mode == DoMake) beginMake
+ -- make/interactive require invoking the compilation manager
+ if (mode == DoMake) then beginMake srcs else do
+ if (mode == DoInteractive) then beginInteractive srcs else do
-- for each source file, find which phases to run
- pipelines <- mapM (genPipeline mode stop_flag) srcs
+ let lang = hscLang init_dyn_flags
+ pipelines <- mapM (genPipeline mode stop_flag True lang) srcs
let src_pipelines = zip srcs pipelines
- o_file <- readIORef output_file
- if isJust o_file && mode /= DoLink && length srcs > 1
- then throwDyn (UsageError "can't apply -o option to multiple source files")
+ -- sanity checking
+ o_file <- readIORef v_Output_file
+ ohi <- readIORef v_Output_hi
+ if length srcs > 1 && (isJust ohi || (isJust o_file && mode /= DoLink))
+ then throwDyn (UsageError "can't apply -o or -ohi options to multiple source files")
else do
if null srcs then throwDyn (UsageError "no input files") else do
- -- save the flag state, because this could be modified by OPTIONS pragmas
- -- during the compilation, and we'll need to restore it before starting
- -- the next compilation.
- saved_driver_state <- readIORef driver_state
-
let compileFile (src, phases) = do
+ writeIORef v_Driver_state saved_driver_state
+ writeIORef v_DynFlags init_dyn_flags
r <- runPipeline phases src (mode==DoLink) True
- writeIORef driver_state saved_driver_state
return r
o_files <- mapM compileFile src_pipelines
when (mode == DoMkDependHS) endMkDependHS
-
when (mode == DoLink) (doLink o_files)
-- grab the last -B option on the command line, and
setTopDir args = do
let (minusbs, others) = partition (prefixMatch "-B") args
(case minusbs of
- [] -> writeIORef topDir clibdir
- some -> writeIORef topDir (drop 2 (last some)))
+ [] -> writeIORef v_TopDir clibdir
+ some -> writeIORef v_TopDir (drop 2 (last some)))
return others
-beginMake = panic "`ghc --make' unimplemented"
-
------------------------------------------------------------------------------
--- compatibility code
-
-#if __GLASGOW_HASKELL__ <= 408
-catchJust = catchIO
-ioErrors = justIoErrors
-throwTo = raiseInThread
-#endif
-
-#ifdef mingw32_TARGET_OS
-foreign import "_getpid" getProcessID :: IO Int
+beginMake :: [String] -> IO ()
+beginMake mods
+ = do case mods of
+ [] -> throwDyn (UsageError "no input files")
+ [mod] -> do state <- cmInit Batch
+ cmLoadModule state mod
+ return ()
+ _ -> throwDyn (UsageError "only one module allowed with --make")
+
+
+beginInteractive :: [String] -> IO ()
+#ifndef GHCI
+beginInteractive = throwDyn (OtherError "not build for interactive use")
+#else
+beginInteractive mods
+ = do state <- cmInit Interactive
+ let mod = case mods of
+ [] -> Nothing
+ [mod] -> Just mod
+ _ -> throwDyn (UsageError
+ "only one module allowed with --interactive")
+ interactiveUI state mod
#endif
projects / ghc-hetmet.git / blobdiff