import Id ( Id, idType, idInfo, idArity, isDataConWorkId,
setIdUnfolding, isDeadBinder,
idNewDemandInfo, setIdInfo,
+ idSpecialisation, setIdSpecialisation,
setIdOccInfo, zapLamIdInfo, setOneShotLambda,
)
import OccName ( encodeFS )
import Type ( isUnLiftedType, seqType, tyConAppArgs, funArgTy,
splitFunTy_maybe, splitFunTy, eqType
)
-import Subst ( mkSubst, substTy, substExpr,
+import Subst ( mkSubst, substTy, substExpr, substRules,
isInScope, lookupIdSubst, simplIdInfo
)
import TysPrim ( realWorldStatePrimTy )
| isStrictDmd (idNewDemandInfo bndr) || isStrictType (idType bndr) -- A strict let
= -- Don't use simplBinder because that doesn't keep
-- fragile occurrence info in the substitution
- simplLetBndr env bndr `thenSmpl` \ (env, bndr') ->
+ simplLetBndr env bndr `thenSmpl` \ (env, bndr1) ->
+ simplStrictArg AnRhs env rhs rhs_se (idType bndr1) cont_ty $ \ env1 rhs1 ->
+
+ -- Now complete the binding and simplify the body
let
-- simplLetBndr doesn't deal with the IdInfo, so we must
-- do so here (c.f. simplLazyBind)
- bndr'' = bndr' `setIdInfo` simplIdInfo (getSubst env) (idInfo bndr)
- env1 = modifyInScope env bndr'' bndr''
+ bndr2 = bndr1 `setIdInfo` simplIdInfo (getSubst env) (idInfo bndr)
+ env2 = modifyInScope env1 bndr2 bndr2
in
- simplStrictArg AnRhs env1 rhs rhs_se (idType bndr') cont_ty $ \ env rhs1 ->
-
- -- Now complete the binding and simplify the body
- completeNonRecX env True {- strict -} bndr bndr'' rhs1 thing_inside
+ completeNonRecX env2 True {- strict -} bndr bndr2 rhs1 thing_inside
| otherwise -- Normal, lazy case
= -- Don't use simplBinder because that doesn't keep
-> InExpr -> SimplEnv -- The RHS and its environment
-> SimplM (FloatsWith SimplEnv)
-simplLazyBind env top_lvl is_rec bndr bndr' rhs rhs_se
- = -- Substitute IdInfo on binder, in the light of earlier
- -- substitutions in this very letrec, and extend the
- -- in-scope env, so that the IdInfo for this binder extends
- -- over the RHS for the binder itself.
+simplLazyBind env top_lvl is_rec bndr bndr1 rhs rhs_se
+ = let -- Transfer the IdInfo of the original binder to the new binder
+ -- This is crucial: we must preserve
+ -- strictness
+ -- rules
+ -- worker info
+ -- etc. To do this we must apply the current substitution,
+ -- which incorporates earlier substitutions in this very letrec group.
--
+ -- NB 1. We do this *before* processing the RHS of the binder, so that
+ -- its substituted rules are visible in its own RHS.
-- This is important. Manuel found cases where he really, really
-- wanted a RULE for a recursive function to apply in that function's
- -- own right-hand side.
+ -- own right-hand side.
--
- -- NB: does no harm for non-recursive bindings
- let
- bndr'' = bndr' `setIdInfo` simplIdInfo (getSubst env) (idInfo bndr)
- env1 = modifyInScope env bndr'' bndr''
+ -- NB 2: We do not transfer the arity (see Subst.substIdInfo)
+ -- The arity of an Id should not be visible
+ -- in its own RHS, else we eta-reduce
+ -- f = \x -> f x
+ -- to
+ -- f = f
+ -- which isn't sound. And it makes the arity in f's IdInfo greater than
+ -- the manifest arity, which isn't good.
+ -- The arity will get added later.
+ --
+ -- NB 3: It's important that we *do* transer the loop-breaker OccInfo,
+ -- because that's what stops the Id getting inlined infinitely, in the body
+ -- of the letrec.
+
+ -- NB 4: does no harm for non-recursive bindings
+
+ bndr2 = bndr1 `setIdInfo` simplIdInfo (getSubst env) (idInfo bndr)
+ env1 = modifyInScope env bndr2 bndr2
rhs_env = setInScope rhs_se env1
is_top_level = isTopLevel top_lvl
ok_float_unlifted = not is_top_level && isNonRec is_rec
- rhs_cont = mkStop (idType bndr') AnRhs
+ rhs_cont = mkStop (idType bndr1) AnRhs
in
-- Simplify the RHS; note the mkStop, which tells
-- the simplifier that this is the RHS of a let.
-- If any of the floats can't be floated, give up now
-- (The allLifted predicate says True for empty floats.)
if (not ok_float_unlifted && not (allLifted floats)) then
- completeLazyBind env1 top_lvl bndr bndr''
+ completeLazyBind env1 top_lvl bndr bndr2
(wrapFloats floats rhs1)
else
-- If the result is a PAP, float the floats out, else wrap them
-- By this time it's already been ANF-ised (if necessary)
if isEmptyFloats floats && isNilOL aux_binds then -- Shortcut a common case
- completeLazyBind env1 top_lvl bndr bndr'' rhs2
+ completeLazyBind env1 top_lvl bndr bndr2 rhs2
-- We use exprIsTrivial here because we want to reveal lone variables.
-- E.g. let { x = letrec { y = E } in y } in ...
tick LetFloatFromLet `thenSmpl_` (
addFloats env1 floats $ \ env2 ->
addAtomicBinds env2 (fromOL aux_binds) $ \ env3 ->
- completeLazyBind env3 top_lvl bndr bndr'' rhs2)
+ completeLazyBind env3 top_lvl bndr bndr2 rhs2)
else
- completeLazyBind env1 top_lvl bndr bndr'' (wrapFloats floats rhs1)
+ completeLazyBind env1 top_lvl bndr bndr2 (wrapFloats floats rhs1)
#ifdef DEBUG
demanded_float (NonRec b r) = isStrictDmd (idNewDemandInfo b) && not (isUnLiftedType (idType b))
simplExprF env (Let (Rec pairs) body) cont
= simplRecBndrs env (map fst pairs) `thenSmpl` \ (env, bndrs') ->
- -- NB: bndrs' don't have unfoldings or spec-envs
- -- We add them as we go down, using simplPrags
+ -- NB: bndrs' don't have unfoldings or rules
+ -- We add them as we go down
simplRecBind env NotTopLevel pairs bndrs' `thenSmpl` \ (floats, env) ->
addFloats env floats $ \ env ->
-- an interesting context of any kind to combine with
-- (even a type application -- anything except Stop)
= simplExprF env e cont
+
+simplNote env (CoreNote s) e cont
+ = simplExpr env e `thenSmpl` \ e' ->
+ rebuild env (Note (CoreNote s) e') cont
\end{code}
projects / ghc-hetmet.git / blobdiff