-TOP = ../..
-UnlitSuffixRules = YES
-include $(TOP)/ghc/mk/ghc.mk
+# -----------------------------------------------------------------------------
+# $Id: Makefile,v 1.14 2000/12/08 11:47:00 rrt Exp $
+#
-# Literate header files
-HLIT = $(patsubst %.lh, %.h, $(wildcard *.lh))
+TOP = ..
+include $(TOP)/mk/boilerplate.mk
-# Header files built by configure
-HCONFIG = config.h platform.h
+#
+# All header files
+#
+H_FILES = $(filter-out gmp.h,$(wildcard *.h)) gmp.h
-# Everything else
-HFILES = stgdefs.h rtsdefs.h StgDirections.h StgMachDeps.h error.h \
- ieee-flpt.h gmp.h LLC.h HLC.h
+#
+# Header file built from the configure script's findings
+#
+H_CONFIG = config.h
-ifeq ($(GhcWithNativeCodeGen),YES)
- ALLFILES = $(HLIT) $(HFILES) $(TARGETPLATFORM).h
-else
- ALLFILES = $(HLIT) $(HFILES)
+boot :: gmp.h
+
+all :: $(H_CONFIG) NativeDefs.h
+
+# gmp.h is copied from the GMP directory
+gmp.h : $(FPTOOLS_TOP)/ghc/rts/gmp/gmp.h
+ $(CP) $< $@
+
+# The fptools configure script creates the configuration header file
+# and puts it in fptools/mk/config.h. We copy it down to here, prepending
+# some make variables specifying cpp platform variables.
+#
+$(H_CONFIG) : $(FPTOOLS_TOP)/mk/config.h $(FPTOOLS_TOP)/mk/config.mk
+
+$(H_CONFIG) :
+ @echo "Creating $@..."
+ @$(RM) $@
+ @echo "#define HostPlatform_TYPE $(HostPlatform_CPP)" > $@
+ @echo "#define TargetPlatform_TYPE $(HostPlatform_CPP)" >> $@
+ @echo "#define BuildPlatform_TYPE $(HostPlatform_CPP)" >> $@
+ @echo >> $@
+ @echo "#define $(HostPlatform_CPP)_HOST 1" >> $@
+ @echo "#define $(HostPlatform_CPP)_TARGET 1" >> $@
+ @echo "#define $(HostPlatform_CPP)_BUILD 1" >> $@
+ @echo >> $@
+ @echo "#define $(HostArch_CPP)_HOST_ARCH 1" >> $@
+ @echo "#define $(HostArch_CPP)_TARGET_ARCH 1" >> $@
+ @echo "#define $(HostArch_CPP)_BUILD_ARCH 1" >> $@
+ @echo "#define HOST_ARCH \"$(HostArch_CPP)\"" >> $@
+ @echo >> $@
+ @echo "#define $(HostOS_CPP)_HOST_OS 1" >> $@
+ @echo "#define $(HostOS_CPP)_TARGET_OS 1" >> $@
+ @echo "#define $(HostOS_CPP)_BUILD_OS 1" >> $@
+ @echo "#define HOST_OS \"$(HostOS_CPP)\"" >> $@
+ifeq "$(HostOS_CPP)" "irix"
+ @echo "#ifndef $(IRIX_MAJOR)_TARGET_OS " >> $@
+ @echo "#define $(IRIX_MAJOR)_TARGET_OS 1" >> $@
+ @echo "#endif " >> $@
endif
+ @echo >> $@
+ @echo "#define $(HostVendor_CPP)_HOST_VENDOR 1" >> $@
+ @echo "#define $(HostVendor_CPP)_TARGET_VENDOR 1" >> $@
+ @echo "#define $(HostVendor_CPP)_BUILD_VENDOR 1" >> $@
+ @cat $(FPTOOLS_TOP)/mk/$@ >> $@
+ @echo "Done."
-$(TARGETPLATFORM).h : mkNativeHdr
- $(RM) $@
- ./mkNativeHdr > $@ || ( rm $@ && exit 1 )
+# ---------------------------------------------------------------------------
+# Make NativeDefs.h for the NCG
-mkNativeHdr : mkNativeHdr.c $(HLIT) $(HFILES)
- $(GHC) -c mkNativeHdr.c
- $(CC) $(CFLAGS) -o mkNativeHdr mkNativeHdr.c
+C_PROG = mkNativeHdr
+C_SRCS = mkNativeHdr.c
-all :: $(ALLFILES)
+NativeDefs.h : mkNativeHdr
+ ./mkNativeHdr >NativeDefs.h
-install :: $(ALLFILES) $(HCONFIG)
- $(INSTALL) $(INSTDATAFLAGS) $(ALLFILES) $(INSTDATADIR_GHC)/includes
- $(INSTALL) $(INSTDATAFLAGS) $(HCONFIG) $(INSTLIBDIR_GHC)/includes
+CLEAN_FILES += NativeDefs.h
-ifeq ($(GhcWithNativeCodeGen),YES)
- clean ::
- $(RM) $(HLIT) mkNativeHdr mkNativeHdr.c $(TARGETPLATFORM).h
-else
- clean ::
- $(RM) $(HLIT) mkNativeHdr mkNativeHdr.c
-endif
+# ---------------------------------------------------------------------------
+# boot setup:
+#
+# Need config.h to make dependencies in the runtime system source.
+#
+boot :: all
+
+#
+# Install all header files
+#
+# Hackily set the install destination here:
+#
+# Note: we keep per-platform copies of all the include files
+# (ditto for interface files). This is not *really* needed, but
+# it gives (perhaps) a cleaner binary dist structure..might change.
+#
+override datadir:=$(libdir)/includes
+INSTALL_DATAS += $(H_FILES) $(H_CONFIG)
+
+#
+# `make clean' settings:
+#
+CLEAN_FILES += $(H_CONFIG)
+
+#
+# Finally, slurp in the standard targets.
+#
+include $(TOP)/mk/target.mk