-- sendmsg -- :: Socket -> Message -> MsgFlags -> IO Int
-- recvmsg -- :: Socket -> MsgFlags -> IO Message
- shutdown, -- :: Socket -> ShutdownCmd -> IO ()
- sClose, -- :: Socket -> IO ()
inet_addr, -- :: String -> IO HostAddress
inet_ntoa, -- :: HostAddress -> IO String
sIsListening, -- :: Socket -> IO Bool
sIsReadable, -- :: Socket -> IO Bool
sIsWritable, -- :: Socket -> IO Bool
+ shutdown, -- :: Socket -> ShutdownCmd -> IO ()
+ sClose, -- :: Socket -> IO ()
-- socket opts
SocketOption(..),
-- The following are exported ONLY for use in the BSD module and
--- should not be used else where.
+-- should not be used anywhere else.
packFamily, unpackFamily,
packSocketType,
packSockAddr, unpackSockAddr
+ , withSocketsDo -- :: IO a -> IO a
+
) where
import GlaExts
import ST
import Ix
+import Weak ( addForeignFinalizer )
import PrelIOBase -- IOError, Handle representation
import PrelHandle
+import PrelConc ( threadWaitRead, threadWaitWrite )
import Foreign
+import Addr ( nullAddr )
import IO
import IOExts ( IORef, newIORef, readIORef, writeIORef )
-import PackedString ( unpackNBytesPS, byteArrayToPS,
- unpackCString, unpackCStringIO,
- unpackCStringLenIO
+import CString ( unpackNBytesBAIO,
+ unpackCStringIO,
+ unpackCStringLenIO,
+ allocChars
)
\end{code}
newtype PortNumber = PNum Int -- 16-bit value stored in network byte order.
deriving ( Eq )
+instance Show PortNumber where
+ showsPrec p pn = showsPrec p (ntohs pn)
+
mkPortNumber :: Int -> PortNumber
mkPortNumber v = unsafePerformIO $ do
po <- _casm_ ``%r=(int)htons((int)%0); '' v
return (PNum po)
+ntohs :: PortNumber -> Int
+ntohs (PNum po) = unsafePerformIO (_casm_ ``%r=(int)ntohs((int)%0); '' po)
+
+instance Num PortNumber where
+ fromInt i = mkPortNumber i
+ fromInteger i = fromInt (fromInteger i)
+ -- for completeness.
+ (+) x y = mkPortNumber (ntohs x + ntohs y)
+ (-) x y = mkPortNumber (ntohs x - ntohs y)
+ negate x = mkPortNumber (-ntohs x)
+ (*) x y = mkPortNumber (ntohs x * ntohs y)
+ abs n = mkPortNumber (abs (ntohs n))
+ signum n = mkPortNumber (signum (ntohs n))
+
data SockAddr -- C Names
-#ifndef cygwin32_TARGET_OS
+#if !defined(cygwin32_TARGET_OS) && !defined(mingw32_TARGET_OS)
= SockAddrUnix -- struct sockaddr_un
String -- sun_path
| SockAddrInet -- struct sockaddr_in
status <- _ccall_ createSocket (packFamily family)
(packSocketType stype)
protocol
- case status of
+ case (status::Int) of
-1 -> constructErrorAndFail "socket"
n -> do
socket_status <- newIORef NotConnected
-> SockAddr -- Address to Bind to
-> IO ()
-bindSocket (MkSocket s family stype protocol socketStatus) addr = do
-#ifndef cygwin32_TARGET_OS
- let isDomainSocket = if family == AF_UNIX then 1 else (0::Int)
+bindSocket (MkSocket s _family _stype _protocol socketStatus) addr = do
+#if !defined(cygwin32_TARGET_OS) && !defined(mingw32_TARGET_OS)
+ let isDomainSocket = if _family == AF_UNIX then 1 else (0::Int)
#else
let isDomainSocket = 0
#endif
currentStatus <- readIORef socketStatus
if currentStatus /= NotConnected
then
- fail (userError ("bindSocket: can't peform bind on socket in status " ++
+ ioError (userError ("bindSocket: can't peform bind on socket in status " ++
show currentStatus))
else do
addr' <- packSockAddr addr
- let (_,sz) = boundsOfByteArray addr'
- status <- _ccall_ bindSocket s addr' sz isDomainSocket
- case status of
+ let (_,sz) = boundsOfMutableByteArray addr'
+ status <- _ccall_ bindSocket s addr' sz (isDomainSocket::Int)
+ case (status::Int) of
-1 -> constructErrorAndFail "bindSocket"
- 0 -> writeIORef socketStatus (Bound)
+ _ -> writeIORef socketStatus (Bound)
\end{code}
Make a connection to an already opened socket on a given machine and port.
-assumes that we have already called createSocket, othewise it will fail.
+assumes that we have already called createSocket, otherwise it will fail.
This is the dual to $bindSocket$. The {\em server} process will
usually bind to a port number, the {\em client} will then connect to
-> SockAddr -- Socket address stuff
-> IO ()
-connect (MkSocket s family stype protocol socketStatus) addr = do
-#ifndef cygwin32_TARGET_OS
- let isDomainSocket = if family == AF_UNIX then 1 else (0::Int)
+connect (MkSocket s _family _stype _protocol socketStatus) addr = do
+#if !defined(mingw32_TARGET_OS) && !defined(cygwin32_TARGET_OS)
+ let isDomainSocket = if _family == AF_UNIX then 1 else (0::Int)
#else
let isDomainSocket = 0
#endif
currentStatus <- readIORef socketStatus
if currentStatus /= NotConnected
then
- fail (userError ("connect: can't peform connect on socket in status " ++
+ ioError (userError ("connect: can't peform connect on socket in status " ++
show currentStatus))
else do
addr' <- packSockAddr addr
- let (_,sz) = boundsOfByteArray addr'
- status <- _ccall_ connectSocket s addr' sz isDomainSocket
- case status of
+ let (_,sz) = boundsOfMutableByteArray addr'
+ status <- _ccall_ connectSocket s addr' sz (isDomainSocket::Int)
+ case (status::Int) of
-1 -> constructErrorAndFail "connect"
- 0 -> writeIORef socketStatus Connected
+ -6 -> do threadWaitWrite s >> writeIORef socketStatus Connected
+ -- ToDo: check for error with getsockopt
+ _ -> writeIORef socketStatus Connected
\end{code}
The programmer must call $listen$ to tell the system software
-> Int -- Queue Length
-> IO ()
-listen (MkSocket s family stype protocol socketStatus) backlog = do
+listen (MkSocket s _family _stype _protocol socketStatus) backlog = do
currentStatus <- readIORef socketStatus
if currentStatus /= Bound
then
- fail (userError ("listen: can't peform listen on socket in status " ++
+ ioError (userError ("listen: can't peform listen on socket in status " ++
show currentStatus))
else do
status <- _ccall_ listenSocket s backlog
- case status of
+ case (status::Int) of
-1 -> constructErrorAndFail "listen"
- 0 -> writeIORef socketStatus Listening
+ _ -> writeIORef socketStatus Listening
\end{code}
A call to $accept$ only returns when data is available on the given
okay <- sIsAcceptable sock
if not okay
then
- fail (userError ("accept: can't peform accept on socket in status " ++
+ ioError (userError ("accept: can't peform accept on socket in status " ++
show currentStatus))
else do
(ptr, sz) <- allocSockAddr family
- int_star <- stToIO (newIntArray (0,1))
+ int_star <- stToIO (newIntArray ((0::Int),1))
stToIO (writeIntArray int_star 0 sz)
- sock <- _ccall_ acceptSocket s ptr int_star
- case sock of
+ new_sock <- accept_socket s ptr int_star
+ a_sz <- stToIO (readIntArray int_star 0)
+ addr <- unpackSockAddr ptr a_sz
+ new_status <- newIORef Connected
+ return ((MkSocket new_sock family stype protocol new_status), addr)
+
+accept_socket :: Int
+ -> MutableByteArray RealWorld Int
+ -> MutableByteArray RealWorld Int
+ -> IO Int
+
+accept_socket s ptr int_star = do
+ new_sock <- _ccall_ acceptSocket s ptr int_star
+ case (new_sock::Int) of
-1 -> constructErrorAndFail "accept"
- _ -> do
- sz <- stToIO (readIntArray int_star 0)
- addr <- unpackSockAddr ptr sz
- status <- newIORef Connected
- return ((MkSocket sock family stype protocol status), addr)
+
+ -- wait if there are no pending connections
+ -5 -> threadWaitRead s >> accept_socket s ptr int_star
+
+ _ -> return new_sock
\end{code}
%************************************************************************
-> String -- Data to send
-> IO Int -- Number of Bytes sent
-writeSocket (MkSocket s family stype protocol status) xs = do
+writeSocket (MkSocket s _family _stype _protocol status) xs = do
currentStatus <- readIORef status
if not ((currentStatus == Connected) || (currentStatus == Listening))
then
- fail (userError ("writeSocket: can't peform write on socket in status " ++
+ ioError (userError ("writeSocket: can't peform write on socket in status " ++
show currentStatus))
else do
nbytes <- _ccall_ writeDescriptor s xs (length xs)
- case nbytes of
+ case (nbytes::Int) of
-1 -> constructErrorAndFail "writeSocket"
_ -> return nbytes
-> SockAddr
-> IO Int -- Number of Bytes sent
-sendTo (MkSocket s family stype protocol status) xs addr = do
+sendTo (MkSocket s _family _stype _protocol status) xs addr = do
currentStatus <- readIORef status
if not ((currentStatus == Connected) || (currentStatus == Listening) || (currentStatus == Bound))
then
- fail (userError ("sendTo: can't peform write on socket in status " ++
+ ioError (userError ("sendTo: can't peform write on socket in status " ++
show currentStatus))
else do
addr' <- packSockAddr addr
- let (_,sz) = boundsOfByteArray addr'
+ let (_,sz) = boundsOfMutableByteArray addr'
nbytes <- _ccall_ sendTo__ s xs (length xs) addr' sz
- case nbytes of
+ case (nbytes::Int) of
-1 -> constructErrorAndFail "sendTo"
_ -> return nbytes
-> Int -- Number of Bytes to Read
-> IO (String, Int) -- (Data Read, Number of Bytes)
-readSocket (MkSocket s family stype protocol status) nbytes = do
+readSocket (MkSocket s _family _stype _protocol status) nbytes = do
currentStatus <- readIORef status
if not ((currentStatus == Connected) || (currentStatus == Listening))
then
- fail (userError ("readSocket: can't perform read on socket in status " ++
+ ioError (userError ("readSocket: can't perform read on socket in status " ++
show currentStatus))
else do
- ptr <- stToIO (newCharArray (0, nbytes))
- nbytes <- _ccall_ readDescriptor s ptr nbytes
- case nbytes of
+ ptr <- allocChars nbytes
+ rlen <- _ccall_ readDescriptor s ptr nbytes
+ case (rlen::Int) of
-1 -> constructErrorAndFail "readSocket"
n -> do
barr <- stToIO (unsafeFreezeByteArray ptr)
- return (unpackNBytesPS (byteArrayToPS barr) n, n)
+ str <- unpackNBytesBAIO barr n
+ return (str, n)
readSocketAll :: Socket -> IO String
readSocketAll s =
loop ""
recvFrom :: Socket -> Int -> IO (String, Int, SockAddr)
-recvFrom (MkSocket s family stype protocol status) nbytes = do
+recvFrom (MkSocket s _family _stype _protocol status) nbytes = do
currentStatus <- readIORef status
if not ((currentStatus == Connected) || (currentStatus == Listening) || (currentStatus == Bound))
then
- fail (userError ("recvFrom: can't perform read on socket in status " ++
+ ioError (userError ("recvFrom: can't perform read on socket in status " ++
show currentStatus))
else do
- ptr <- stToIO (newCharArray (0, nbytes))
+ ptr <- allocChars nbytes
(ptr_addr,_) <- allocSockAddr AF_INET
- nbytes <- _ccall_ recvFrom__ s ptr nbytes ptr_addr
- case nbytes of
+ rlen <- _ccall_ recvFrom__ s ptr nbytes ptr_addr
+ case (rlen::Int) of
-1 -> constructErrorAndFail "recvFrom"
n -> do
barr <- stToIO (unsafeFreezeByteArray ptr)
addr <- unpackSockAddrInet ptr_addr
- return (unpackNBytesPS (byteArrayToPS barr) n, n, addr)
+ str <- unpackNBytesBAIO barr n
+ return (str, n, addr)
\end{code}
\begin{code}
socketPort :: Socket -- Connected & Bound Socket
-> IO PortNumber -- Port Number of Socket
-socketPort sock@(MkSocket s AF_INET stype protocol status) =
+socketPort sock@(MkSocket _ AF_INET _ _ _) =
getSocketName sock >>= \(SockAddrInet port _) ->
return port
-socketPort (MkSocket s family stype protocol status) =
- fail (userError ("socketPort: not supported for Family " ++ show family))
+socketPort (MkSocket _ family _ _ _) =
+ ioError (userError ("socketPort: not supported for Family " ++ show family))
\end{code}
Calling $getPeerName$ returns the address details of the machine,
\begin{code}
getPeerName :: Socket -> IO SockAddr
-getPeerName (MkSocket s family stype protocol status) = do
- (ptr, sz) <- allocSockAddr family
- int_star <- stToIO (newIntArray (0,1))
- stToIO (writeIntArray int_star 0 sz)
+getPeerName (MkSocket s family _ _ _) = do
+ (ptr, a_sz) <- allocSockAddr family
+ int_star <- stToIO (newIntArray ((0::Int),1))
+ stToIO (writeIntArray int_star 0 a_sz)
status <- _ccall_ getPeerName s ptr int_star
- case status of
+ case (status::Int) of
-1 -> constructErrorAndFail "getPeerName"
_ -> do
sz <- stToIO (readIntArray int_star 0)
getSocketName :: Socket -> IO SockAddr
-getSocketName (MkSocket s family stype protocol status) = do
- (ptr, sz) <- allocSockAddr family
- int_star <- stToIO (newIntArray (0,1))
- stToIO (writeIntArray int_star 0 sz)
- status <- _ccall_ getSockName s ptr int_star
- case status of
+getSocketName (MkSocket s family _ _ _) = do
+ (ptr, a_sz) <- allocSockAddr family
+ int_star <- stToIO (newIntArray ((0::Int),1))
+ stToIO (writeIntArray int_star 0 a_sz)
+ rc <- _ccall_ getSockName s ptr int_star
+ case (rc::Int) of
-1 -> constructErrorAndFail "getSocketName"
_ -> do
sz <- stToIO (readIntArray int_star 0)
\begin{code}
data SocketOption
- = Broadcast {- SO_BROADCAST -}
- | Debug {- SO_DEBUG -}
- | DontRoute {- SO_DONTROUTE -}
+ = Debug {- SO_DEBUG -}
+ | ReuseAddr {- SO_REUSEADDR -}
+ | Type {- SO_TYPE -}
| SoError {- SO_ERROR -}
+ | DontRoute {- SO_DONTROUTE -}
+ | Broadcast {- SO_BROADCAST -}
+ | SendBuffer {- SO_SNDBUF -}
+ | RecvBuffer {- SO_RCVBUF -}
| KeepAlive {- SO_KEEPALIVE -}
--- | Linger {- SO_LINGER -}
| OOBInline {- SO_OOBINLINE -}
- | RecvBuffer {- SO_RCVBUF -}
- | SendBuffer {- SO_SNDBUF -}
+#if !defined(cygwin32_TARGET_OS) && !defined(mingw32_TARGET_OS)
+ | MaxSegment {- TCP_MAXSEG -}
+#endif
+ | NoDelay {- TCP_NODELAY -}
+-- | Linger {- SO_LINGER -}
+#if 0
+ | ReusePort {- SO_REUSEPORT -} -- BSD only?
| RecvLowWater {- SO_RCVLOWAT -}
| SendLowWater {- SO_SNDLOWAT -}
| RecvTimeOut {- SO_RCVTIMEO -}
| SendTimeOut {- SO_SNDTIMEO -}
- | ReuseAddr {- SO_REUSEADDR -}
- | Type {- SO_TYPE -}
| UseLoopBack {- SO_USELOOPBACK -} -- not used, I believe.
- | MaxSegment {- TCP_MAXSEG -}
- | NoDelay {- TCP_NODELAY -}
+#endif
+
+socketOptLevel :: SocketOption -> Int
+socketOptLevel so =
+ case so of
+#if !defined(cygwin32_TARGET_OS) && !defined(mingw32_TARGET_OS)
+ MaxSegment -> ``IPPROTO_TCP''
+#endif
+ NoDelay -> ``IPPROTO_TCP''
+ _ -> ``SOL_SOCKET''
packSocketOption :: SocketOption -> Int
packSocketOption so =
case so of
- Broadcast -> ``SO_BROADCAST''
Debug -> ``SO_DEBUG''
- DontRoute -> ``SO_DONTROUTE''
+ ReuseAddr -> ``SO_REUSEADDR''
+ Type -> ``SO_TYPE''
SoError -> ``SO_ERROR''
+ DontRoute -> ``SO_DONTROUTE''
+ Broadcast -> ``SO_BROADCAST''
+ SendBuffer -> ``SO_SNDBUF''
+ RecvBuffer -> ``SO_RCVBUF''
KeepAlive -> ``SO_KEEPALIVE''
OOBInline -> ``SO_OOBINLINE''
- RecvBuffer -> ``SO_RCVBUF''
- SendBuffer -> ``SO_SNDBUF''
+#if !defined(cygwin32_TARGET_OS) && !defined(mingw32_TARGET_OS)
+ MaxSegment -> ``TCP_MAXSEG''
+#endif
+ NoDelay -> ``TCP_NODELAY''
+#if 0
+ ReusePort -> ``SO_REUSEPORT'' -- BSD only?
RecvLowWater -> ``SO_RCVLOWAT''
SendLowWater -> ``SO_SNDLOWAT''
RecvTimeOut -> ``SO_RCVTIMEO''
SendTimeOut -> ``SO_SNDTIMEO''
- ReuseAddr -> ``SO_REUSEADDR''
- Type -> ``SO_TYPE''
UseLoopBack -> ``SO_USELOOPBACK''
- MaxSegment -> ``TCP_MAXSEG''
- NoDelay -> ``TCP_NODELAY''
+#endif
setSocketOption :: Socket
-> SocketOption -- Option Name
-> Int -- Option Value
-> IO ()
-setSocketOption (MkSocket s family stype protocol status) so v = do
- rc <- _ccall_ setSocketOption__ s (packSocketOption so) v
- if rc /= 0
+setSocketOption (MkSocket s _ _ _ _) so v = do
+ rc <- _ccall_ setSocketOption__ s
+ (packSocketOption so)
+ (socketOptLevel so)
+ v
+ if rc /= (0::Int)
then constructErrorAndFail "setSocketOption"
else return ()
getSocketOption :: Socket
-> SocketOption -- Option Name
-> IO Int -- Option Value
-getSocketOption (MkSocket s family stype protocol status) so = do
- rc <- _ccall_ getSocketOption__ s (packSocketOption so)
+getSocketOption (MkSocket s _ _ _ _) so = do
+ rc <- _ccall_ getSocketOption__ s
+ (packSocketOption so)
+ (socketOptLevel so)
if rc == -1 -- let's just hope that value isn't taken..
then constructErrorAndFail "getSocketOption"
else return rc
#endif
-#if cygwin32_TARGET_OS
+#if defined(cygwin32_TARGET_OS) || defined(mingw32_TARGET_OS)
data Family =
AF_UNSPEC -- unspecified
#endif
-#if freebsd_TARGET_OS
+#if freebsd2_TARGET_OS || freebsd3_TARGET_OS
data Family =
AF_UNSPEC -- unspecified
-- Alpha running OSF or a SPARC with SunOS, rather than Solaris.
#if osf1_TARGET_OS || osf3_TARGET_OS || sunos4_TARGET_OS || hpux_TARGET_OS || \
- aix_TARGET_OS || freebsd_TARGET_OS
+ aix_TARGET_OS || freebsd2_TARGET_OS || freebsd3_TARGET_OS
data SocketType =
Stream
| Datagram
-- This is for a box running cygwin32 toolchain.
-#if defined(cygwin32_TARGET_OS)
+#if defined(mingw32_TARGET_OS) || defined(cygwin32_TARGET_OS)
data SocketType =
Stream
| Datagram
| Raw
| RDM -- reliably delivered msg
| SeqPacket
- | Packet
deriving (Eq, Ord, Ix, Show)
packSocketType stype =
Raw -> ``SOCK_RAW''
RDM -> ``SOCK_RDM''
SeqPacket -> ``SOCK_SEQPACKET''
- Packet -> ``SOCK_PACKET''
#endif
%************************************************************************
\begin{code}
-aNY_PORT = 0::Int
+aNY_PORT :: PortNumber
+aNY_PORT = mkPortNumber 0
+
iNADDR_ANY :: HostAddress
iNADDR_ANY = unsafePerformIO (_casm_ `` %r = htonl(INADDR_ANY); '')
-sOMAXCONN = ``SOMAXCONN''::Int
+sOMAXCONN :: Int
+sOMAXCONN = ``SOMAXCONN''
+
+maxListenQueue :: Int
maxListenQueue = sOMAXCONN
-------------------------------------------------------------------------------
shutdown (MkSocket s _ _ _ _) stype = do
let t = sdownCmdToInt stype
status <- _ccall_ shutdownSocket s t
- case status of
+ case (status::Int) of
-1 -> constructErrorAndFail "shutdown"
_ -> return ()
-------------------------------------------------------------------------------
sClose :: Socket -> IO ()
-sClose (MkSocket s family stype protocol status) = _ccall_ close s
+sClose (MkSocket s _ _ _ _) = _ccall_ close s
-------------------------------------------------------------------------------
sIsConnected :: Socket -> IO Bool
-sIsConnected (MkSocket s family stype protocol status) = do
+sIsConnected (MkSocket _ _ _ _ status) = do
value <- readIORef status
return (value == Connected)
-------------------------------------------------------------------------------
sIsBound :: Socket -> IO Bool
-sIsBound (MkSocket s family stype protocol status) = do
+sIsBound (MkSocket _ _ _ _ status) = do
value <- readIORef status
return (value == Bound)
-------------------------------------------------------------------------------
sIsListening :: Socket -> IO Bool
-sIsListening (MkSocket s family stype protocol status) = do
+sIsListening (MkSocket _ _ _ _ status) = do
value <- readIORef status
return (value == Listening)
-------------------------------------------------------------------------------
sIsReadable :: Socket -> IO Bool
-sIsReadable (MkSocket s family stype protocol status) = do
+sIsReadable (MkSocket _ _ _ _ status) = do
value <- readIORef status
return (value == Listening || value == Connected)
-------------------------------------------------------------------------------
sIsWritable :: Socket -> IO Bool
-sIsWritable = sIsReadable
+sIsWritable = sIsReadable -- sort of.
-------------------------------------------------------------------------------
sIsAcceptable :: Socket -> IO Bool
-#ifndef cygwin32_TARGET_OS
-sIsAcceptable (MkSocket s AF_UNIX Stream protocol status) = do
+#if !defined(cygwin32_TARGET_OS) && !defined(mingw32_TARGET_OS)
+sIsAcceptable (MkSocket _ AF_UNIX Stream _ status) = do
value <- readIORef status
return (value == Connected || value == Bound || value == Listening)
-sIsAcceptable (MkSocket s AF_UNIX _ protocol status) =
- return False
+sIsAcceptable (MkSocket _ AF_UNIX _ _ _) = return False
#endif
-sIsAcceptable (MkSocket s _ stype protocol status) = do
+sIsAcceptable (MkSocket _ _ _ _ status) = do
value <- readIORef status
return (value == Connected || value == Listening)
inet_addr ipstr = do
had <- _ccall_ inet_addr ipstr
if had == (W# (int2Word# (negateInt# 1#))) -- hack to avoid depending on Int.intToWord here.
- then fail (userError ("inet_addr: Malformed address: " ++ ipstr))
+ then ioError (userError ("inet_addr: Malformed address: " ++ ipstr))
else return had -- network byte order
inet_ntoa :: HostAddress -> IO String
allocSockAddr :: Family -> IO (MutableByteArray RealWorld Int, Int)
-#ifndef cygwin32_TARGET_OS
+#if !defined(cygwin32_TARGET_OS) && !defined(mingw32_TARGET_OS)
allocSockAddr AF_UNIX = do
- ptr <- stToIO (newCharArray (0,``sizeof(struct sockaddr_un)''))
- let (_,sz) = boundsOfByteArray ptr
+ ptr <- allocChars ``sizeof(struct sockaddr_un)''
+ let (_,sz) = boundsOfMutableByteArray ptr
return (ptr, sz)
#endif
allocSockAddr AF_INET = do
- ptr <- stToIO (newCharArray (0,``sizeof(struct sockaddr_in)''))
- let (_,sz) = boundsOfByteArray ptr
+ ptr <- allocChars ``sizeof(struct sockaddr_in)''
+ let (_,sz) = boundsOfMutableByteArray ptr
return (ptr, sz)
-------------------------------------------------------------------------------
unpackSockAddr arr len = do
fam <- _casm_ ``%r = ((struct sockaddr*)%0)->sa_family;'' arr
case unpackFamily fam of
-#ifndef cygwin32_TARGET_OS
+#if !defined(cygwin32_TARGET_OS) && !defined(mingw32_TARGET_OS)
AF_UNIX -> unpackSockAddrUnix arr (len - ``sizeof(short)'')
#endif
AF_INET -> unpackSockAddrInet arr
-------------------------------------------------------------------------------
-#ifndef cygwin32_TARGET_OS
+#if !defined(cygwin32_TARGET_OS) && !defined(mingw32_TARGET_OS)
{-
sun_path is *not* NULL terminated, hence we *do* need to know the
packSockAddr :: SockAddr -> IO (MutableByteArray RealWorld Int)
-#ifndef cygwin32_TARGET_OS
+#if !defined(cygwin32_TARGET_OS) && !defined(mingw32_TARGET_OS)
packSockAddr (SockAddrUnix path) = do
(ptr,_) <- allocSockAddr AF_UNIX
_casm_ ``(((struct sockaddr_un *)%0)->sun_family) = AF_UNIX;'' ptr
#ifndef __PARALLEL_HASKELL__
socketToHandle :: Socket -> IOMode -> IO Handle
-socketToHandle (MkSocket s family stype protocol status) m = do
- ptr <- _casm_ ``%r = fdopen (%0, (char *)%1);'' s m'
- fp <- makeForeignObj ptr (``&freeFile'' :: Addr)
- hndl <- newHandle (htype fp Nothing False)
- hSetBuffering hndl NoBuffering
- return hndl
+socketToHandle (MkSocket fd _ _ _ _) m = do
+ fileobj <- _ccall_ openFd fd (file_mode::Int) (file_flags::Int)
+ if fileobj == nullAddr then
+ ioError (userError "socketHandle: Failed to open file desc")
+ else do
+ fo <- mkForeignObj fileobj
+ addForeignFinalizer fo (freeFileObject fo)
+ mkBuffer__ fo 0 -- not buffered
+ hndl <- newHandle (Handle__ fo htype NoBuffering socket_str)
+ return hndl
where
- m' =
+ socket_str = "<socket: "++show fd
+#if defined(mingw32_TARGET_OS)
+ file_flags = flush_on_close + 1024{-I'm a socket fd, me!-}
+#else
+ file_flags = flush_on_close
+#endif
+
+ (flush_on_close, file_mode) =
case m of
- ReadMode -> "r"
- WriteMode -> "w"
- AppendMode -> "a"
- ReadWriteMode -> "r+"
+ AppendMode -> (1, 0)
+ WriteMode -> (1, 1)
+ ReadMode -> (0, 2)
+ ReadWriteMode -> (1, 3)
+
htype =
case m of
ReadMode -> ReadHandle
#endif
\end{code}
+If you're using WinSock, the programmer has to call a startup
+routine before starting to use the goods. So, if you want to
+stay portable across all ghc-supported platforms, you have to
+use @withSocketsDo@...:
+
+\begin{code}
+withSocketsDo :: IO a -> IO a
+#if !defined(HAVE_WINSOCK_H) || defined(cygwin32_TARGET_OS)
+withSocketsDo x = x
+#else
+withSocketsDo act = do
+ x <- initWinSock
+ if ( x /= 0 ) then
+ ioError (userError "Failed to initialise WinSock")
+ else do
+ v <- act
+ shutdownWinSock
+ return v
+
+foreign import "initWinSock" initWinSock :: IO Int
+foreign import "shutdownWinSock" shutdownWinSock :: IO ()
+
+#endif
+
+\end{code}
projects / ghc-hetmet.git / blobdiff