+% ------------------------------------------------------------------------------
+% $Id: PrelHandle.lhs,v 1.63 2000/11/07 10:42:56 simonmar Exp $
%
-% (c) The AQUA Project, Glasgow University, 1994-1996
+% (c) The AQUA Project, Glasgow University, 1994-2000
%
\section[PrelHandle]{Module @PrelHandle@}
\begin{code}
{-# OPTIONS -fno-implicit-prelude -#include "cbits/stgio.h" #-}
-#include "error.h"
-
+#include "cbits/stgerror.h"
+#ifndef __HUGS__ /* Hugs just includes this in PreludeBuiltin so no header needed */
module PrelHandle where
-import PrelST
-import PrelArr ( ByteArray(..), newVar, readVar, writeVar )
+import PrelArr
+import PrelBase
+import PrelAddr ( Addr, nullAddr )
+import PrelByteArr ( ByteArray(..) )
import PrelRead ( Read )
import PrelList ( span )
import PrelIOBase
-import PrelUnsafe ( unsafePerformIO )
-import PrelTup
-import PrelMaybe
-import PrelBase
-import PrelAddr
-import PrelErr ( error )
-import PrelGHC
-import Ix
+import PrelMaybe ( Maybe(..) )
+import PrelException
+import PrelEnum
+import PrelNum ( toBig, Integer(..), Num(..) )
+import PrelShow
+import PrelAddr ( Addr, nullAddr )
+import PrelReal ( toInteger )
+import PrelPack ( packString )
+#ifndef __PARALLEL_HASKELL__
+import PrelWeak ( addForeignFinalizer )
+#endif
+
+import PrelConc
#ifndef __PARALLEL_HASKELL__
-import PrelForeign ( ForeignObj, makeForeignObj, writeForeignObj )
+import PrelForeign ( makeForeignObj, mkForeignObj )
#endif
-import PrelConc -- concurrent only
+#endif /* ndef(__HUGS__) */
+
+#ifdef __HUGS__
+#define __CONCURRENT_HASKELL__
+#define stToIO id
+#endif
+
+#ifndef __PARALLEL_HASKELL__
+#define FILE_OBJECT ForeignObj
+#else
+#define FILE_OBJECT Addr
+#endif
\end{code}
+\begin{code}
+mkBuffer__ :: FILE_OBJECT -> Int -> IO ()
+mkBuffer__ fo sz_in_bytes = do
+ chunk <-
+ case sz_in_bytes of
+ 0 -> return nullAddr -- this has the effect of overwriting the pointer to the old buffer.
+ _ -> do
+ chunk <- malloc sz_in_bytes
+ if chunk == nullAddr
+ then ioException (IOError Nothing ResourceExhausted "mkBuffer__" "not enough virtual memory")
+ else return chunk
+ setBuf fo chunk sz_in_bytes
+\end{code}
%*********************************************************
%* *
-\subsection{Types @FilePath@, @Handle@, @Handle__@}
+\subsection{Types @Handle@, @Handle__@}
%* *
%*********************************************************
The @Handle@ and @Handle__@ types are defined in @IOBase@.
\begin{code}
-type FilePath = String
-
{-# INLINE newHandle #-}
-{-# INLINE readHandle #-}
-{-# INLINE writeHandle #-}
-newHandle :: Handle__ -> IO Handle
-readHandle :: Handle -> IO Handle__
-writeHandle :: Handle -> Handle__ -> IO ()
-
-#if defined(__CONCURRENT_HASKELL__)
+newHandle :: Handle__ -> IO Handle
-- Use MVars for concurrent Haskell
newHandle hc = newMVar hc >>= \ h ->
return (Handle h)
+\end{code}
+
+%*********************************************************
+%* *
+\subsection{@withHandle@ operations}
+%* *
+%*********************************************************
-readHandle (Handle h) = takeMVar h
-writeHandle (Handle h) hc = putMVar h hc
+In the concurrent world, handles are locked during use. This is done
+by wrapping an MVar around the handle which acts as a mutex over
+operations on the handle.
-#else
+To avoid races, we use the following bracketing operations. The idea
+is to obtain the lock, do some operation and replace the lock again,
+whether the operation succeeded or failed. We also want to handle the
+case where the thread receives an exception while processing the IO
+operation: in these cases we also want to relinquish the lock.
--- Use ordinary MutableVars for non-concurrent Haskell
-newHandle hc = stToIO (newVar hc >>= \ h ->
- return (Handle h))
+There are three versions of @withHandle@: corresponding to the three
+possible combinations of:
-readHandle (Handle h) = stToIO (readVar h)
-writeHandle (Handle h) hc = stToIO (writeVar h hc)
+ - the operation may side-effect the handle
+ - the operation may return a result
+If the operation generates an error or an exception is raised, the
+orignal handle is always replaced [ this is the case at the moment,
+but we might want to revisit this in the future --SDM ].
+
+\begin{code}
+withHandle :: Handle -> (Handle__ -> IO (Handle__,a)) -> IO a
+{-# INLINE withHandle #-}
+withHandle (Handle h) act =
+ block $ do
+ h_ <- takeMVar h
+ (h',v) <- catchException (act h_) (\ ex -> putMVar h h_ >> throw ex)
+ putMVar h h'
+ return v
+
+withHandle_ :: Handle -> (Handle__ -> IO a) -> IO a
+{-# INLINE withHandle_ #-}
+withHandle_ (Handle h) act =
+ block $ do
+ h_ <- takeMVar h
+ v <- catchException (act h_) (\ ex -> putMVar h h_ >> throw ex)
+ putMVar h h_
+ return v
+
+withHandle__ :: Handle -> (Handle__ -> IO Handle__) -> IO ()
+{-# INLINE withHandle__ #-}
+withHandle__ (Handle h) act =
+ block $ do
+ h_ <- takeMVar h
+ h' <- catchException (act h_) (\ ex -> putMVar h h_ >> throw ex)
+ putMVar h h'
+ return ()
+\end{code}
+
+nullFile__ is only used for closed handles, plugging it in as a null
+file object reference.
+
+\begin{code}
+nullFile__ :: FILE_OBJECT
+nullFile__ =
+#ifndef __PARALLEL_HASKELL__
+ unsafePerformIO (makeForeignObj nullAddr (return ()))
+#else
+ nullAddr
#endif
+
+
+mkClosedHandle__ :: Handle__
+mkClosedHandle__ =
+ Handle__ { haFO__ = nullFile__,
+ haType__ = ClosedHandle,
+ haBufferMode__ = NoBuffering,
+ haFilePath__ = "closed file",
+ haBuffers__ = []
+ }
\end{code}
%*********************************************************
%* *
-\subsection{Functions}
+\subsection{Handle Finalizers}
%* *
%*********************************************************
\begin{code}
-#ifndef __PARALLEL_HASKELL__
-filePtr :: Handle__ -> ForeignObj
-#else
-filePtr :: Handle__ -> Addr
-#endif
-filePtr (SemiClosedHandle fp _) = fp
-filePtr (ReadHandle fp _ _) = fp
-filePtr (WriteHandle fp _ _) = fp
-filePtr (AppendHandle fp _ _) = fp
-filePtr (ReadWriteHandle fp _ _) = fp
-
-bufferMode :: Handle__ -> Maybe BufferMode
-bufferMode (ReadHandle _ m _) = m
-bufferMode (WriteHandle _ m _) = m
-bufferMode (AppendHandle _ m _) = m
-bufferMode (ReadWriteHandle _ m _) = m
-
-markHandle :: Handle__ -> Handle__
-markHandle h@(ReadHandle fp m b)
- | b = h
- | otherwise = ReadHandle fp m True
-markHandle h@(WriteHandle fp m b)
- | b = h
- | otherwise = WriteHandle fp m True
-markHandle h@(AppendHandle fp m b)
- | b = h
- | otherwise = AppendHandle fp m True
-markHandle h@(ReadWriteHandle fp m b)
- | b = h
- | otherwise = ReadWriteHandle fp m True
+stdHandleFinalizer :: Handle -> IO ()
+stdHandleFinalizer (Handle hdl) = do
+ handle <- takeMVar hdl
+ let fo = haFO__ handle
+ freeStdFileObject fo
+ freeBuffers (haBuffers__ handle)
+
+handleFinalizer :: Handle -> IO ()
+handleFinalizer (Handle hdl) = do
+ handle <- takeMVar hdl
+ let fo = haFO__ handle
+ freeFileObject fo
+ freeBuffers (haBuffers__ handle)
+
+freeBuffers [] = return ()
+freeBuffers (b:bs) = do { free b; freeBuffers bs }
+
+foreign import "libHS_cbits" "freeStdFileObject" unsafe
+ freeStdFileObject :: FILE_OBJECT -> IO ()
+foreign import "libHS_cbits" "freeFileObject" unsafe
+ freeFileObject :: FILE_OBJECT -> IO ()
+foreign import "free" unsafe
+ free :: Addr -> IO ()
\end{code}
--------------------------------------------
-
%*********************************************************
%* *
\subsection[StdHandles]{Standard handles}
or output channel respectively. The third manages output to the
standard error channel. These handles are initially open.
+
\begin{code}
stdin, stdout, stderr :: Handle
-stdin = unsafePerformIO (do
- rc <- _ccall_ getLock (``stdin''::Addr) 0
- case rc of
- 0 -> newHandle ClosedHandle
+stdout = unsafePerformIO (do
+ rc <- getLock (1::Int) (1::Int) -- ConcHask: SAFE, won't block
+ case (rc::Int) of
+ 0 -> newHandle (mkClosedHandle__)
1 -> do
+ fo <- openStdFile (1::Int)
+ (0::Int){-writeable-} -- ConcHask: SAFE, won't block
+
#ifndef __PARALLEL_HASKELL__
- fp <- makeForeignObj (``stdin''::Addr) (``&freeStdFile''::Addr)
- newHandle (ReadHandle fp Nothing False)
+ fo <- mkForeignObj fo
+ -- I know this is deprecated, but I couldn't bring myself
+ -- to move fixIO into the prelude just so I could use makeForeignObj.
+ -- --SDM
+#endif
+
+#ifdef __HUGS__
+/* I dont care what the Haskell report says, in an interactive system,
+ * stdout should be unbuffered by default.
+ */
+ let bm = NoBuffering
#else
- newHandle (ReadHandle ``stdin'' Nothing False)
+ (bm, bf_size) <- getBMode__ fo
+ mkBuffer__ fo bf_size
#endif
- _ -> do ioError <- constructError "stdin"
- newHandle (ErrorHandle ioError)
+ hdl <- newHandle (Handle__ fo WriteHandle bm "stdout" [])
+
+#ifndef __PARALLEL_HASKELL__
+ addForeignFinalizer fo (stdHandleFinalizer hdl)
+#endif
+ return hdl
+
+ _ -> constructErrorAndFail "stdout"
)
-stdout = unsafePerformIO (do
- rc <- _ccall_ getLock (``stdout''::Addr) 1
- case rc of
- 0 -> newHandle ClosedHandle
+stdin = unsafePerformIO (do
+ rc <- getLock (0::Int) (0::Int) -- ConcHask: SAFE, won't block
+ case (rc::Int) of
+ 0 -> newHandle (mkClosedHandle__)
1 -> do
+ fo <- openStdFile (0::Int)
+ (1::Int){-readable-} -- ConcHask: SAFE, won't block
+
#ifndef __PARALLEL_HASKELL__
- fp <- makeForeignObj (``stdout''::Addr) (``&freeStdFile''::Addr)
- newHandle (WriteHandle fp Nothing False)
-#else
- newHandle (WriteHandle ``stdout'' Nothing False)
+ fo <- mkForeignObj fo
+#endif
+ (bm, bf_size) <- getBMode__ fo
+ mkBuffer__ fo bf_size
+ hdl <- newHandle (Handle__ fo ReadHandle bm "stdin" [])
+ -- when stdin and stdout are both connected to a terminal, ensure
+ -- that anything buffered on stdout is flushed prior to reading from
+ -- stdin.
+#ifndef __PARALLEL_HASKELL__
+ addForeignFinalizer fo (stdHandleFinalizer hdl)
#endif
- _ -> do ioError <- constructError "stdout"
- newHandle (ErrorHandle ioError)
+ hConnectTerms stdout hdl
+ return hdl
+ _ -> constructErrorAndFail "stdin"
)
+
stderr = unsafePerformIO (do
- rc <- _ccall_ getLock (``stderr''::Addr) 1
- case rc of
- 0 -> newHandle ClosedHandle
+ rc <- getLock (2::Int) (1::Int){-writeable-} -- ConcHask: SAFE, won't block
+ case (rc::Int) of
+ 0 -> newHandle (mkClosedHandle__)
1 -> do
+ fo <- openStdFile (2::Int)
+ (0::Int){-writeable-} -- ConcHask: SAFE, won't block
+
#ifndef __PARALLEL_HASKELL__
- fp <- makeForeignObj (``stderr''::Addr) (``&freeStdFile''::Addr)
- newHandle (WriteHandle fp (Just NoBuffering) False)
-#else
- newHandle (WriteHandle ``stderr'' (Just NoBuffering) False)
+ fo <- mkForeignObj fo
+#endif
+ hdl <- newHandle (Handle__ fo WriteHandle NoBuffering "stderr" [])
+ -- when stderr and stdout are both connected to a terminal, ensure
+ -- that anything buffered on stdout is flushed prior to writing to
+ -- stderr.
+#ifndef __PARALLEL_HASKELL__
+ addForeignFinalizer fo (stdHandleFinalizer hdl)
#endif
- _ -> do ioError <- constructError "stderr"
- newHandle (ErrorHandle ioError)
+ hConnectTo stdout hdl
+ return hdl
+
+ _ -> constructErrorAndFail "stderr"
)
\end{code}
data IOMode = ReadMode | WriteMode | AppendMode | ReadWriteMode
deriving (Eq, Ord, Ix, Enum, Read, Show)
+data IOModeEx
+ = BinaryMode IOMode
+ | TextMode IOMode
+ deriving (Eq, Read, Show)
+
openFile :: FilePath -> IOMode -> IO Handle
+openFile fp im = openFileEx fp (TextMode im)
-openFile f m = do
- ptr <- _ccall_ openFile f m'
- if ptr /= ``NULL'' then do
+openFileEx :: FilePath -> IOModeEx -> IO Handle
+
+openFileEx f m = do
+ fo <- primOpenFile (packString f)
+ (file_mode::Int)
+ (binary::Int) -- ConcHask: SAFE, won't block
+ if fo /= nullAddr then do
#ifndef __PARALLEL_HASKELL__
- fp <- makeForeignObj ptr ((``&freeFile'')::Addr)
- newHandle (htype fp Nothing False)
-#else
- newHandle (htype ptr Nothing False)
+ fo <- mkForeignObj fo
#endif
+ (bm, bf_size) <- getBMode__ fo
+ mkBuffer__ fo bf_size
+ hdl <- newHandle (Handle__ fo htype bm f [])
+#ifndef __PARALLEL_HASKELL__
+ addForeignFinalizer fo (handleFinalizer hdl)
+#endif
+ return hdl
else do
- ioError@(IOError hn iot msg) <- constructError "openFile"
- let
- improved_error -- a HACK, I guess
- = case iot of
- AlreadyExists -> IOError hn AlreadyExists (msg ++ ": " ++ f)
- NoSuchThing -> IOError hn NoSuchThing (msg ++ ": " ++ f)
- PermissionDenied -> IOError hn PermissionDenied (msg ++ ": " ++ f)
- _ -> ioError
- fail improved_error
+ constructErrorAndFailWithInfo "openFile" f
where
- m' = case m of
- ReadMode -> "r"
- WriteMode -> "w"
- AppendMode -> "a"
- ReadWriteMode -> "r+"
-
- htype = case m of
+ (imo, binary) =
+ case m of
+ BinaryMode bmo -> (bmo, 1)
+ TextMode tmo -> (tmo, 0)
+
+ file_mode =
+ case imo of
+ AppendMode -> 0
+ WriteMode -> 1
+ ReadMode -> 2
+ ReadWriteMode -> 3
+
+ htype = case imo of
ReadMode -> ReadHandle
WriteMode -> WriteHandle
AppendMode -> AppendHandle
\begin{code}
hClose :: Handle -> IO ()
-hClose handle = do
- htype <- readHandle handle
- case htype of
- ErrorHandle ioError -> do
- writeHandle handle htype
- fail ioError
- ClosedHandle -> do
- writeHandle handle htype
- ioe_closedHandle handle
- SemiClosedHandle fp (buf,_) -> do
- (if buf /= ``NULL'' then
- _ccall_ free buf
- else
- return ())
- fp_a <- _casm_ `` %r = (char *)%0; '' fp
- if fp_a /= (``NULL''::Addr) then do
- -- Under what condition can this be NULL?
- rc <- _ccall_ closeFile fp
- {- We explicitly close a file object so that we can be told
- if there were any errors. Note that after @hClose@
- has been performed, the ForeignObj embedded in the Handle
- is still lying around in the heap, so care is taken
- to avoid closing the file object when the ForeignObj
- is finalised. -}
- if rc == 0 then do
-#ifndef __PARALLEL_HASKELL__
- -- Mark the foreign object data value as
- -- gone to the finaliser (freeFile())
- writeForeignObj fp ``NULL''
-#endif
- writeHandle handle ClosedHandle
- else do
- writeHandle handle htype
- constructErrorAndFail "hClose"
-
- else writeHandle handle htype
-
- other -> do
- let fp = filePtr other
- rc <- _ccall_ closeFile fp
- if rc == 0 then do
-#ifndef __PARALLEL_HASKELL__
- -- Mark the foreign object data
- writeForeignObj fp ``NULL''
-#endif
- writeHandle handle ClosedHandle
- else do
- writeHandle handle htype
- constructErrorAndFail "hClose"
+hClose handle =
+ withHandle__ handle $ \ handle_ -> do
+ case haType__ handle_ of
+ ClosedHandle -> return handle_
+ _ -> do
+ rc <- closeFile (haFO__ handle_)
+ (1::Int){-flush if you can-} -- ConcHask: SAFE, won't block
+ {- We explicitly close a file object so that we can be told
+ if there were any errors. Note that after @hClose@
+ has been performed, the ForeignObj embedded in the Handle
+ is still lying around in the heap, so care is taken
+ to avoid closing the file object when the ForeignObj
+ is finalized. (we overwrite the file ptr in the underlying
+ FileObject with a NULL as part of closeFile())
+ -}
+
+ if (rc /= 0)
+ then constructErrorAndFail "hClose"
+
+ -- free the spare buffers (except the handle buffer)
+ -- associated with this handle.
+ else do freeBuffers (haBuffers__ handle_)
+ return (handle_{ haType__ = ClosedHandle,
+ haBuffers__ = [] })
\end{code}
Computation $hClose hdl$ makes handle {\em hdl} closed. Before the
%*********************************************************
%* *
-\subsection[EOF]{Detecting the End of Input}
+\subsection[FileSize]{Detecting the size of a file}
%* *
%*********************************************************
\begin{code}
hFileSize :: Handle -> IO Integer
-hFileSize handle = do
- htype <- readHandle handle
- case htype of
- ErrorHandle ioError -> do
- writeHandle handle htype
- fail ioError
- ClosedHandle -> do
- writeHandle handle htype
- ioe_closedHandle handle
- SemiClosedHandle _ _ -> do
- writeHandle handle htype
- ioe_closedHandle handle
- other ->
+hFileSize handle =
+ withHandle_ handle $ \ handle_ -> do
+ case haType__ handle_ of
+ ClosedHandle -> ioe_closedHandle "hFileSize" handle
+ SemiClosedHandle -> ioe_closedHandle "hFileSize" handle
+#ifdef __HUGS__
+ _ -> do
+ mem <- primNewByteArray 8{-sizeof_int64-}
+ rc <- fileSize_int64 (haFO__ handle_) mem -- ConcHask: SAFE, won't block
+ if rc == 0 then do
+ result <- primReadInt64Array mem 0
+ return (primInt64ToInteger result)
+ else
+ constructErrorAndFail "hFileSize"
+#else
+ _ ->
-- HACK! We build a unique MP_INT of the right shape to hold
-- a single unsigned word, and we let the C routine
-- change the data bits
--
- -- For some reason, this fails to typecheck if converted to a do
- -- expression --SDM
- _casm_ ``%r = 1;'' >>= \(I# hack#) ->
- case int2Integer# hack# of
- result@(J# _ _ d#) -> do
- let bogus_bounds = (error "fileSize"::(Int,Int))
- rc <- _ccall_ fileSize (filePtr other)
- (ByteArray bogus_bounds d#)
- writeHandle handle htype
- if rc == 0 then
- return result
+ case int2Integer# 1# of
+ (# s, d #) -> do
+ rc <- fileSize (haFO__ handle_) d -- ConcHask: SAFE, won't block
+ if rc == (0::Int) then
+ return (J# s d)
else
constructErrorAndFail "hFileSize"
+#endif
\end{code}
-For a readable handle {\em hdl}, computation $hIsEOF hdl$ returns
-$True$ if no further input can be taken from {\em hdl} or for a
+%*********************************************************
+%* *
+\subsection[EOF]{Detecting the End of Input}
+%* *
+%*********************************************************
+
+
+For a readable handle {\em hdl}, @hIsEOF hdl@ returns
+@True@ if no further input can be taken from @hdl@ or for a
physical file, if the current I/O position is equal to the length of
-the file. Otherwise, it returns $False$.
+the file. Otherwise, it returns @False@.
\begin{code}
hIsEOF :: Handle -> IO Bool
hIsEOF handle = do
- htype <- readHandle handle
- case htype of
- ErrorHandle ioError -> do
- writeHandle handle htype
- fail ioError
- ClosedHandle -> do
- writeHandle handle htype
- ioe_closedHandle handle
- SemiClosedHandle _ _ -> do
- writeHandle handle htype
- ioe_closedHandle handle
- WriteHandle _ _ _ -> do
- writeHandle handle htype
- fail (IOError (Just handle) IllegalOperation
- "handle is not open for reading")
- AppendHandle _ _ _ -> do
- writeHandle handle htype
- fail (IOError (Just handle) IllegalOperation
- "handle is not open for reading")
- other -> do
- rc <- _ccall_ fileEOF (filePtr other)
- writeHandle handle (markHandle htype)
- case rc of
- 0 -> return False
- 1 -> return True
- _ -> constructErrorAndFail "hIsEOF"
+ rc <- mayBlockRead "hIsEOF" handle fileEOF
+ case rc of
+ 0 -> return False
+ 1 -> return True
+ _ -> constructErrorAndFail "hIsEOF"
isEOF :: IO Bool
isEOF = hIsEOF stdin
hSetBuffering handle mode =
case mode of
BlockBuffering (Just n)
- | n <= 0 -> fail (IOError (Just handle) InvalidArgument
- "illegal buffer size")
- other -> do
- htype <- readHandle handle
- if isMarked htype then do
- writeHandle handle htype
- fail (IOError (Just handle)
- UnsupportedOperation
- "can't set buffering for a dirty handle")
- else
- case htype of
- ErrorHandle ioError -> do
- writeHandle handle htype
- fail ioError
- ClosedHandle -> do
- writeHandle handle htype
- ioe_closedHandle handle
- SemiClosedHandle _ _ -> do
- writeHandle handle htype
- ioe_closedHandle handle
- other -> do
- rc <- _ccall_ setBuffering (filePtr other) bsize
- if rc == 0 then
- writeHandle handle ((hcon other) (filePtr other)
- (Just mode) True)
- else do
- writeHandle handle htype
- constructErrorAndFail "hSetBuffering"
-
+ | n <= 0 -> ioException
+ (IOError (Just handle)
+ InvalidArgument
+ "hSetBuffering"
+ ("illegal buffer size " ++ showsPrec 9 n []))
+ -- 9 => should be parens'ified.
+ _ ->
+ withHandle__ handle $ \ handle_ -> do
+ case haType__ handle_ of
+ ClosedHandle -> ioe_closedHandle "hSetBuffering" handle
+ _ -> do
+ {- Note:
+ - we flush the old buffer regardless of whether
+ the new buffer could fit the contents of the old buffer
+ or not.
+ - allow a handle's buffering to change even if IO has
+ occurred (ANSI C spec. does not allow this, nor did
+ the previous implementation of IO.hSetBuffering).
+ - a non-standard extension is to allow the buffering
+ of semi-closed handles to change [sof 6/98]
+ -}
+ let fo = haFO__ handle_
+ rc <- mayBlock fo (setBuffering fo bsize) -- ConcHask: UNSAFE, may block
+ if rc == 0
+ then do
+ return (handle_{ haBufferMode__ = mode })
+ else do
+ -- Note: failure to change the buffer size will cause old buffer to be flushed.
+ constructErrorAndFail "hSetBuffering"
where
- isMarked :: Handle__ -> Bool
- isMarked (ReadHandle fp m b) = b
- isMarked (WriteHandle fp m b) = b
- isMarked (AppendHandle fp m b) = b
- isMarked (ReadWriteHandle fp m b) = b
-
bsize :: Int
bsize = case mode of
- NoBuffering -> 0
- LineBuffering -> -1
- BlockBuffering Nothing -> -2
- BlockBuffering (Just n) -> n
-
-#ifndef __PARALLEL_HASKELL__
- hcon :: Handle__ -> (ForeignObj -> (Maybe BufferMode) -> Bool -> Handle__)
-#else
- hcon :: Handle__ -> (Addr -> (Maybe BufferMode) -> Bool -> Handle__)
-#endif
- hcon (ReadHandle _ _ _) = ReadHandle
- hcon (WriteHandle _ _ _) = WriteHandle
- hcon (AppendHandle _ _ _) = AppendHandle
- hcon (ReadWriteHandle _ _ _) = ReadWriteHandle
+ NoBuffering -> 0
+ LineBuffering -> -1
+ BlockBuffering Nothing -> -2
+ BlockBuffering (Just n) -> n
\end{code}
-Computation $flush hdl$ causes any items buffered for output in handle
-{\em hdl} to be sent immediately to the operating system.
+The action @hFlush hdl@ causes any items buffered for output
+in handle {\em hdl} to be sent immediately to the operating
+system.
\begin{code}
hFlush :: Handle -> IO ()
-hFlush handle = do
- htype <- readHandle handle
- case htype of
- ErrorHandle ioError -> do
- writeHandle handle htype
- fail ioError
- ClosedHandle -> do
- writeHandle handle htype
- ioe_closedHandle handle
- SemiClosedHandle _ _ -> do
- writeHandle handle htype
- ioe_closedHandle handle
- other -> do
- rc <- _ccall_ flushFile (filePtr other)
- writeHandle handle (markHandle htype)
- if rc == 0 then
- return ()
- else
- constructErrorAndFail "hFlush"
+hFlush handle =
+ wantWriteableHandle "hFlush" handle $ \ handle_ -> do
+ let fo = haFO__ handle_
+ rc <- mayBlock fo (flushFile fo) -- ConcHask: UNSAFE, may block
+ if rc == 0 then
+ return ()
+ else
+ constructErrorAndFail "hFlush"
+
\end{code}
%*********************************************************
\begin{code}
-data HandlePosn = HandlePosn Handle Int
+data HandlePosn
+ = HandlePosn
+ Handle -- Q: should this be a weak or strong ref. to the handle?
+ -- [what's the winning argument for it not being strong? --sof]
+ HandlePosition
+
+instance Eq HandlePosn where
+ (HandlePosn h1 p1) == (HandlePosn h2 p2) = p1==p2 && h1==h2
+
+ -- HandlePosition is the Haskell equivalent of POSIX' off_t.
+ -- We represent it as an Integer on the Haskell side, but
+ -- cheat slightly in that hGetPosn calls upon a C helper
+ -- that reports the position back via (merely) an Int.
+type HandlePosition = Integer
+
+mkHandlePosn :: Handle -> HandlePosition -> HandlePosn
+mkHandlePosn h p = HandlePosn h p
data SeekMode = AbsoluteSeek | RelativeSeek | SeekFromEnd
deriving (Eq, Ord, Ix, Enum, Read, Show)
\end{code}
-Computation $hGetPosn hdl$ returns the current I/O
+Computation @hGetPosn hdl@ returns the current I/O
position of {\em hdl} as an abstract position. Computation
$hSetPosn p$ sets the position of {\em hdl}
to a previously obtained position {\em p}.
\begin{code}
hGetPosn :: Handle -> IO HandlePosn
-hGetPosn handle = do
- htype <- readHandle handle
- case htype of
- ErrorHandle ioError -> do
- writeHandle handle htype
- fail ioError
- ClosedHandle -> do
- writeHandle handle htype
- ioe_closedHandle handle
- SemiClosedHandle _ _ -> do
- writeHandle handle htype
- ioe_closedHandle handle
- other -> do
- posn <- _ccall_ getFilePosn (filePtr other)
- writeHandle handle htype
- if posn /= -1 then
- return (HandlePosn handle posn)
- else
- constructErrorAndFail "hGetPosn"
+hGetPosn handle =
+ wantSeekableHandle "hGetPosn" handle $ \ handle_ -> do
+ posn <- getFilePosn (haFO__ handle_) -- ConcHask: SAFE, won't block
+ if posn /= -1 then do
+ return (mkHandlePosn handle (fromInt posn))
+ else
+ constructErrorAndFail "hGetPosn"
hSetPosn :: HandlePosn -> IO ()
-hSetPosn (HandlePosn handle posn) = do
- htype <- readHandle handle
- case htype of
- ErrorHandle ioError -> do
- writeHandle handle htype
- fail ioError
- ClosedHandle -> do
- writeHandle handle htype
- ioe_closedHandle handle
- SemiClosedHandle _ _ -> do
- writeHandle handle htype
- ioe_closedHandle handle
- AppendHandle _ _ _ -> do
- writeHandle handle htype
- fail (IOError (Just handle) IllegalOperation "handle is not seekable")
- other -> do
- rc <- _ccall_ setFilePosn (filePtr other) posn
- writeHandle handle (markHandle htype)
- if rc == 0 then
- return ()
- else
- constructErrorAndFail "hSetPosn"
+hSetPosn (HandlePosn handle i@(S# _)) = hSetPosn (HandlePosn handle (toBig i))
+hSetPosn (HandlePosn handle (J# s# d#)) =
+ wantSeekableHandle "hSetPosn" handle $ \ handle_ -> do
+ -- not as silly as it looks: the handle may have been closed in the meantime.
+ let fo = haFO__ handle_
+ rc <- mayBlock fo (setFilePosn fo (I# s#) d#) -- ConcHask: UNSAFE, may block
+ if rc == 0 then do
+ return ()
+ else
+ constructErrorAndFail "hSetPosn"
\end{code}
-Computation $hSeek hdl mode i$ sets the position of handle
-{\em hdl} depending on $mode$. If {\em mode} is
-\begin{itemize}
-\item[{\bf AbsoluteSeek}] The position of {\em hdl} is set to {\em i}.
-\item[{\bf RelativeSeek}] The position of {\em hdl} is set to offset {\em i} from
-the current position.
-\item[{\bf SeekToEnd}] The position of {\em hdl} is set to offset {\em i} from
-the end of the file.
-\item[{\bf SeekFromBeginning}] The position of {\em hdl} is set to offset {\em i} from
-the beginning of the file.
-\end{itemize}
+The action @hSeek hdl mode i@ sets the position of handle
+@hdl@ depending on @mode@. If @mode@ is
+
+ * AbsoluteSeek - The position of @hdl@ is set to @i@.
+ * RelativeSeek - The position of @hdl@ is set to offset @i@ from
+ the current position.
+ * SeekFromEnd - The position of @hdl@ is set to offset @i@ from
+ the end of the file.
-Some handles may not be seekable $hIsSeekable$, or only support a
-subset of the possible positioning operations (e.g. it may only be
-possible to seek to the end of a tape, or to a positive offset from
-the beginning or current position).
+Some handles may not be seekable (see @hIsSeekable@), or only
+support a subset of the possible positioning operations (e.g. it may
+only be possible to seek to the end of a tape, or to a positive
+offset from the beginning or current position).
It is not possible to set a negative I/O position, or for a physical
file, an I/O position beyond the current end-of-file.
+Note:
+ - when seeking using @SeekFromEnd@, positive offsets (>=0) means
+ seeking at or past EOF.
+ - relative seeking on buffered handles can lead to non-obvious results.
+
\begin{code}
hSeek :: Handle -> SeekMode -> Integer -> IO ()
-hSeek handle mode offset@(J# _ s# d#) = do
- htype <- readHandle handle
- case htype of
- ErrorHandle ioError -> do
- writeHandle handle htype
- fail ioError
- ClosedHandle -> do
- writeHandle handle htype
- ioe_closedHandle handle
- SemiClosedHandle _ _ -> do
- writeHandle handle htype
- ioe_closedHandle handle
- AppendHandle _ _ _ -> do
- writeHandle handle htype
- fail (IOError (Just handle) IllegalOperation "handle is not seekable")
- other -> do
- rc <- _ccall_ seekFile (filePtr other) whence (I# s#)
- (ByteArray (0,0) d#)
- writeHandle handle (markHandle htype)
- if rc == 0 then
- return ()
- else
- constructErrorAndFail "hSeek"
+#ifdef __HUGS__
+hSeek handle mode offset =
+ wantSeekableHandle "hSeek" handle $ \ handle_ -> do
+ let fo = haFO__ handle_
+ rc <- mayBlock fo (seekFile fo whence (primIntegerToInt64 offset)) -- ConcHask: UNSAFE, may block
+#else
+hSeek handle mode i@(S# _) = hSeek handle mode (toBig i)
+hSeek handle mode (J# s# d#) =
+ wantSeekableHandle "hSeek" handle $ \ handle_ -> do
+ let fo = haFO__ handle_
+ rc <- mayBlock fo (seekFile fo whence (I# s#) d#) -- ConcHask: UNSAFE, may block
+#endif
+ if rc == 0 then do
+ return ()
+ else
+ constructErrorAndFail "hSeek"
where
whence :: Int
whence = case mode of
- AbsoluteSeek -> ``SEEK_SET''
- RelativeSeek -> ``SEEK_CUR''
- SeekFromEnd -> ``SEEK_END''
+ AbsoluteSeek -> 0
+ RelativeSeek -> 1
+ SeekFromEnd -> 2
\end{code}
%*********************************************************
\begin{code}
hIsOpen :: Handle -> IO Bool
-hIsOpen handle = do
- htype <- readHandle handle
- case htype of
- ErrorHandle ioError -> do
- writeHandle handle htype
- fail ioError
- ClosedHandle -> do
- writeHandle handle htype
- return False
- SemiClosedHandle _ _ -> do
- writeHandle handle htype
- return False
- other -> do
- writeHandle handle htype
- return True
+hIsOpen handle =
+ withHandle_ handle $ \ handle_ -> do
+ case haType__ handle_ of
+ ClosedHandle -> return False
+ SemiClosedHandle -> return False
+ _ -> return True
hIsClosed :: Handle -> IO Bool
-hIsClosed handle = do
- htype <- readHandle handle
- case htype of
- ErrorHandle ioError -> do
- writeHandle handle htype
- fail ioError
- ClosedHandle -> do
- writeHandle handle htype
- return True
- other -> do
- writeHandle handle htype
- return False
+hIsClosed handle =
+ withHandle_ handle $ \ handle_ -> do
+ case haType__ handle_ of
+ ClosedHandle -> return True
+ _ -> return False
+
+{- not defined, nor exported, but mentioned
+ here for documentation purposes:
+
+ hSemiClosed :: Handle -> IO Bool
+ hSemiClosed h = do
+ ho <- hIsOpen h
+ hc <- hIsClosed h
+ return (not (ho || hc))
+-}
hIsReadable :: Handle -> IO Bool
-hIsReadable handle = do
- htype <- readHandle handle
- case htype of
- ErrorHandle ioError -> do
- writeHandle handle htype
- fail ioError
- ClosedHandle -> do
- writeHandle handle htype
- ioe_closedHandle handle
- SemiClosedHandle _ _ -> do
- writeHandle handle htype
- ioe_closedHandle handle
- other -> do
- writeHandle handle htype
- return (isReadable other)
+hIsReadable handle =
+ withHandle_ handle $ \ handle_ -> do
+ case haType__ handle_ of
+ ClosedHandle -> ioe_closedHandle "hIsReadable" handle
+ SemiClosedHandle -> ioe_closedHandle "hIsReadable" handle
+ htype -> return (isReadable htype)
where
- isReadable (ReadHandle _ _ _) = True
- isReadable (ReadWriteHandle _ _ _) = True
- isReadable _ = False
+ isReadable ReadHandle = True
+ isReadable ReadWriteHandle = True
+ isReadable _ = False
hIsWritable :: Handle -> IO Bool
-hIsWritable handle = do
- htype <- readHandle handle
- case htype of
- ErrorHandle ioError -> do
- writeHandle handle htype
- fail ioError
- ClosedHandle -> do
- writeHandle handle htype
- ioe_closedHandle handle
- SemiClosedHandle _ _ -> do
- writeHandle handle htype
- ioe_closedHandle handle
- other -> do
- writeHandle handle htype
- return (isWritable other)
+hIsWritable handle =
+ withHandle_ handle $ \ handle_ -> do
+ case haType__ handle_ of
+ ClosedHandle -> ioe_closedHandle "hIsWritable" handle
+ SemiClosedHandle -> ioe_closedHandle "hIsWritable" handle
+ htype -> return (isWritable htype)
where
- isWritable (AppendHandle _ _ _) = True
- isWritable (WriteHandle _ _ _) = True
- isWritable (ReadWriteHandle _ _ _) = True
- isWritable _ = False
-
-getBufferMode :: Handle__ -> IO Handle__
-getBufferMode htype =
- case bufferMode htype of
- Just x -> return htype
- Nothing -> do
- rc <- _ccall_ getBufferMode (filePtr htype)
- let
- mode =
- case rc of
- 0 -> Just NoBuffering
- -1 -> Just LineBuffering
- -2 -> Just (BlockBuffering Nothing)
- -3 -> Nothing
- n -> Just (BlockBuffering (Just n))
- return (case htype of
- ReadHandle fp _ b -> ReadHandle fp mode b
- WriteHandle fp _ b -> WriteHandle fp mode b
- AppendHandle fp _ b -> AppendHandle fp mode b
- ReadWriteHandle fp _ b -> ReadWriteHandle fp mode b)
-
-hIsBlockBuffered :: Handle -> IO (Bool,Maybe Int)
-hIsBlockBuffered handle = do
- htype <- readHandle handle
- case htype of
- ErrorHandle ioError -> do
- writeHandle handle htype
- fail ioError
- ClosedHandle -> do
- writeHandle handle htype
- ioe_closedHandle handle
- SemiClosedHandle _ _ -> do
- writeHandle handle htype
- ioe_closedHandle handle
- other -> do
- other <- getBufferMode other
- case bufferMode other of
- Just (BlockBuffering size) -> do
- writeHandle handle other
- return (True, size)
- Just _ -> do
- writeHandle handle other
- return (False, Nothing)
- Nothing ->
- constructErrorAndFail "hIsBlockBuffered"
-
-hIsLineBuffered :: Handle -> IO Bool
-hIsLineBuffered handle = do
- htype <- readHandle handle
- case htype of
- ErrorHandle ioError -> do
- writeHandle handle htype
- fail ioError
- ClosedHandle -> do
- writeHandle handle htype
- ioe_closedHandle handle
- SemiClosedHandle _ _ -> do
- writeHandle handle htype
- ioe_closedHandle handle
- other -> do
- other <- getBufferMode other
- case bufferMode other of
- Just LineBuffering -> do
- writeHandle handle other
- return True
- Just _ -> do
- writeHandle handle other
- return False
- Nothing ->
- constructErrorAndFail "hIsLineBuffered"
-
-hIsNotBuffered :: Handle -> IO Bool
-hIsNotBuffered handle = do
- htype <- readHandle handle
- case htype of
- ErrorHandle ioError -> do
- writeHandle handle htype
- fail ioError
- ClosedHandle -> do
- writeHandle handle htype
- ioe_closedHandle handle
- SemiClosedHandle _ _ -> do
- writeHandle handle htype
- ioe_closedHandle handle
- other -> do
- other <- getBufferMode other
- case bufferMode other of
- Just NoBuffering -> do
- writeHandle handle other
- return True
- Just _ -> do
- writeHandle handle other
- return False
- Nothing ->
- constructErrorAndFail "hIsNotBuffered"
+ isWritable AppendHandle = True
+ isWritable WriteHandle = True
+ isWritable ReadWriteHandle = True
+ isWritable _ = False
+
+
+getBMode__ :: FILE_OBJECT -> IO (BufferMode, Int)
+getBMode__ fo = do
+ rc <- getBufferMode fo -- ConcHask: SAFE, won't block
+ case (rc::Int) of
+ 0 -> return (NoBuffering, 0)
+ -1 -> return (LineBuffering, default_buffer_size)
+ -2 -> return (BlockBuffering Nothing, default_buffer_size)
+ -3 -> return (NoBuffering, 0) -- only happens on un-stat()able files.
+ n -> return (BlockBuffering (Just n), n)
+ where
+ default_buffer_size :: Int
+ default_buffer_size = const_BUFSIZ
+\end{code}
+
+Querying how a handle buffers its data:
+\begin{code}
hGetBuffering :: Handle -> IO BufferMode
-hGetBuffering handle = do
- htype <- readHandle handle
- case htype of
- ErrorHandle ioError -> do
- writeHandle handle htype
- fail ioError
- ClosedHandle -> do
- writeHandle handle htype
- ioe_closedHandle handle
- SemiClosedHandle _ _ -> do
- writeHandle handle htype
- ioe_closedHandle handle
- other -> do
- other <- getBufferMode other
- case bufferMode other of
- Just v -> do
- writeHandle handle other
- return v
- Nothing ->
- constructErrorAndFail "hGetBuffering"
+hGetBuffering handle =
+ withHandle_ handle $ \ handle_ -> do
+ case haType__ handle_ of
+ ClosedHandle -> ioe_closedHandle "hGetBuffering" handle
+ _ ->
+ {-
+ We're being non-standard here, and allow the buffering
+ of a semi-closed handle to be queried. -- sof 6/98
+ -}
+ return (haBufferMode__ handle_) -- could be stricter..
+\end{code}
+\begin{code}
hIsSeekable :: Handle -> IO Bool
-hIsSeekable handle = do
- htype <- readHandle handle
- case htype of
- ErrorHandle ioError -> do
- writeHandle handle htype
- fail ioError
- ClosedHandle -> do
- writeHandle handle htype
- ioe_closedHandle handle
- SemiClosedHandle _ _ -> do
- writeHandle handle htype
- ioe_closedHandle handle
- AppendHandle _ _ _ -> do
- writeHandle handle htype
- return False
- other -> do
- rc <- _ccall_ seekFileP (filePtr other)
- writeHandle handle htype
- case rc of
+hIsSeekable handle =
+ withHandle_ handle $ \ handle_ -> do
+ case haType__ handle_ of
+ ClosedHandle -> ioe_closedHandle "hIsSeekable" handle
+ SemiClosedHandle -> ioe_closedHandle "hIsSeekable" handle
+ AppendHandle -> return False
+ _ -> do
+ rc <- seekFileP (haFO__ handle_) -- ConcHask: SAFE, won't block
+ case (rc::Int) of
0 -> return False
1 -> return True
_ -> constructErrorAndFail "hIsSeekable"
%*********************************************************
%* *
+\subsection{Changing echo status}
+%* *
+%*********************************************************
+
+Non-standard GHC extension is to allow the echoing status
+of a handles connected to terminals to be reconfigured:
+
+\begin{code}
+hSetEcho :: Handle -> Bool -> IO ()
+hSetEcho handle on = do
+ isT <- hIsTerminalDevice handle
+ if not isT
+ then return ()
+ else
+ withHandle_ handle $ \ handle_ -> do
+ case haType__ handle_ of
+ ClosedHandle -> ioe_closedHandle "hSetEcho" handle
+ _ -> do
+ rc <- setTerminalEcho (haFO__ handle_) (if on then 1 else 0) -- ConcHask: SAFE, won't block
+ if rc /= ((-1)::Int)
+ then return ()
+ else constructErrorAndFail "hSetEcho"
+
+hGetEcho :: Handle -> IO Bool
+hGetEcho handle = do
+ isT <- hIsTerminalDevice handle
+ if not isT
+ then return False
+ else
+ withHandle_ handle $ \ handle_ -> do
+ case haType__ handle_ of
+ ClosedHandle -> ioe_closedHandle "hGetEcho" handle
+ _ -> do
+ rc <- getTerminalEcho (haFO__ handle_) -- ConcHask: SAFE, won't block
+ case (rc::Int) of
+ 1 -> return True
+ 0 -> return False
+ _ -> constructErrorAndFail "hSetEcho"
+
+hIsTerminalDevice :: Handle -> IO Bool
+hIsTerminalDevice handle = do
+ withHandle_ handle $ \ handle_ -> do
+ case haType__ handle_ of
+ ClosedHandle -> ioe_closedHandle "hIsTerminalDevice" handle
+ _ -> do
+ rc <- isTerminalDevice (haFO__ handle_) -- ConcHask: SAFE, won't block
+ case (rc::Int) of
+ 1 -> return True
+ 0 -> return False
+ _ -> constructErrorAndFail "hIsTerminalDevice"
+\end{code}
+
+\begin{code}
+hConnectTerms :: Handle -> Handle -> IO ()
+hConnectTerms hW hR = hConnectHdl_ hW hR 1{-check if they're both coming connected to ttys-}
+
+hConnectTo :: Handle -> Handle -> IO ()
+hConnectTo hW hR = hConnectHdl_ hW hR 0{-connect regardless-}
+
+hConnectHdl_ :: Handle -> Handle -> Int -> IO ()
+hConnectHdl_ hW hR is_tty =
+ wantRWHandle "hConnectTo" hW $ \ hW_ ->
+ wantRWHandle "hConnectTo" hR $ \ hR_ -> do
+ setConnectedTo (haFO__ hR_) (haFO__ hW_) is_tty -- ConcHask: SAFE, won't block
+\end{code}
+
+As an extension, we also allow characters to be pushed back.
+Like ANSI C stdio, we guarantee no more than one character of
+pushback. (For unbuffered channels, the (default) push-back limit is
+2 chars tho.)
+
+\begin{code}
+hUngetChar :: Handle -> Char -> IO ()
+hUngetChar handle c =
+ wantReadableHandle "hLookAhead" handle $ \ handle_ -> do
+ rc <- ungetChar (haFO__ handle_) c -- ConcHask: SAFE, won't block
+ if rc == ((-1)::Int)
+ then constructErrorAndFail "hUngetChar"
+ else return ()
+
+\end{code}
+
+
+Hoisting files in in one go is sometimes useful, so we support
+this as an extension:
+
+\begin{code}
+-- in one go, read file into an externally allocated buffer.
+slurpFile :: FilePath -> IO (Addr, Int)
+slurpFile fname = do
+ handle <- openFile fname ReadMode
+ sz <- hFileSize handle
+ if sz > toInteger (maxBound::Int) then
+ ioError (userError "slurpFile: file too big")
+ else do
+ let sz_i = fromInteger sz
+ chunk <- malloc sz_i
+ if chunk == nullAddr
+ then do
+ hClose handle
+ constructErrorAndFail "slurpFile"
+ else do
+ rc <- withHandle_ handle ( \ handle_ -> do
+ let fo = haFO__ handle_
+ mayBlock fo (readChunk fo chunk 0 sz_i) -- ConcHask: UNSAFE, may block.
+ )
+ hClose handle
+ if rc < (0::Int)
+ then constructErrorAndFail "slurpFile"
+ else return (chunk, rc)
+
+\end{code}
+
+Sometimes it's useful to get at the file descriptor that
+the Handle contains..
+
+\begin{code}
+getHandleFd :: Handle -> IO Int
+getHandleFd handle =
+ withHandle_ handle $ \ handle_ -> do
+ case (haType__ handle_) of
+ ClosedHandle -> ioe_closedHandle "getHandleFd" handle
+ _ -> do
+ fd <- getFileFd (haFO__ handle_)
+ return fd
+\end{code}
+
+
+%*********************************************************
+%* *
\subsection{Miscellaneous}
%* *
%*********************************************************
-These two functions are meant to get things out of @IOErrors@. They don't!
+These three functions are meant to get things out of @IOErrors@.
+
+(ToDo: improve!)
\begin{code}
ioeGetFileName :: IOError -> Maybe FilePath
ioeGetErrorString :: IOError -> String
ioeGetHandle :: IOError -> Maybe Handle
-ioeGetHandle (IOError h _ _) = h
-ioeGetErrorString (IOError _ iot str) =
+ioeGetHandle (IOException (IOError h _ _ _)) = h
+ioeGetHandle _ = error "IO.ioeGetHandle: not an IO error"
+
+ioeGetErrorString (IOException (IOError _ iot _ str)) =
case iot of
EOF -> "end of file"
_ -> str
+ioeGetErrorString _ = error "IO.ioeGetErrorString: not an IO error"
-ioeGetFileName (IOError _ _ str) =
+ioeGetFileName (IOException (IOError _ _ _ str)) =
case span (/=':') str of
- (fs,[]) -> Nothing
+ (_,[]) -> Nothing
(fs,_) -> Just fs
+ioeGetFileName _ = error "IO.ioeGetFileName: not an IO error"
+\end{code}
+
+'Top-level' IO actions want to catch exceptions (e.g., forkIO and
+PrelMain.mainIO) and report them - topHandler is the exception
+handler they should use for this:
+
+\begin{code}
+-- make sure we handle errors while reporting the error!
+-- (e.g. evaluating the string passed to 'error' might generate
+-- another error, etc.)
+topHandler :: Bool -> Exception -> IO ()
+topHandler bombOut err = catchException (real_handler bombOut err) (topHandler bombOut)
+
+real_handler :: Bool -> Exception -> IO ()
+real_handler bombOut ex =
+ case ex of
+ AsyncException StackOverflow -> reportStackOverflow bombOut
+ ErrorCall s -> reportError bombOut s
+ other -> reportError bombOut (showsPrec 0 other "\n")
+
+reportStackOverflow :: Bool -> IO ()
+reportStackOverflow bombOut = do
+ (hFlush stdout) `catchException` (\ _ -> return ())
+ callStackOverflowHook
+ if bombOut then
+ stg_exit 2
+ else
+ return ()
+
+reportError :: Bool -> String -> IO ()
+reportError bombOut str = do
+ (hFlush stdout) `catchException` (\ _ -> return ())
+ let bs@(ByteArray _ len _) = packString str
+ writeErrString addrOf_ErrorHdrHook bs len
+ if bombOut then
+ stg_exit 1
+ else
+ return ()
+
+foreign import ccall "addrOf_ErrorHdrHook" unsafe
+ addrOf_ErrorHdrHook :: Addr
+
+foreign import ccall "writeErrString__" unsafe
+ writeErrString :: Addr -> ByteArray Int -> Int -> IO ()
+
+-- SUP: Are the hooks allowed to re-enter Haskell land? If yes, remove the unsafe below.
+foreign import ccall "stackOverflow" unsafe
+ callStackOverflowHook :: IO ()
+
+foreign import ccall "stg_exit" unsafe
+ stg_exit :: Int -> IO ()
+\end{code}
+
+A number of operations want to get at a readable or writeable handle, and fail
+if it isn't:
+
+\begin{code}
+wantReadableHandle :: String -> Handle -> (Handle__ -> IO a) -> IO a
+wantReadableHandle fun handle act =
+ withHandle_ handle $ \ handle_ -> do
+ case haType__ handle_ of
+ ClosedHandle -> ioe_closedHandle fun handle
+ SemiClosedHandle -> ioe_closedHandle fun handle
+ AppendHandle -> ioException not_readable_error
+ WriteHandle -> ioException not_readable_error
+ _ -> act handle_
+ where
+ not_readable_error =
+ IOError (Just handle) IllegalOperation fun
+ ("handle is not open for reading")
+
+wantWriteableHandle :: String -> Handle -> (Handle__ -> IO a) -> IO a
+wantWriteableHandle fun handle act =
+ withHandle_ handle $ \ handle_ ->
+ checkWriteableHandle fun handle handle_ (act handle_)
+
+wantWriteableHandle_ :: String -> Handle -> (Handle__ -> IO (Handle__, a)) -> IO a
+wantWriteableHandle_ fun handle act =
+ withHandle handle $ \ handle_ ->
+ checkWriteableHandle fun handle handle_ (act handle_)
+
+checkWriteableHandle fun handle handle_ act
+ = case haType__ handle_ of
+ ClosedHandle -> ioe_closedHandle fun handle
+ SemiClosedHandle -> ioe_closedHandle fun handle
+ ReadHandle -> ioError not_writeable_error
+ _ -> act
+ where
+ not_writeable_error =
+ IOException (IOError (Just handle) IllegalOperation fun
+ ("handle is not open for writing"))
+
+wantRWHandle :: String -> Handle -> (Handle__ -> IO a) -> IO a
+wantRWHandle fun handle act =
+ withHandle_ handle $ \ handle_ -> do
+ case haType__ handle_ of
+ ClosedHandle -> ioe_closedHandle fun handle
+ SemiClosedHandle -> ioe_closedHandle fun handle
+ _ -> act handle_
+
+wantSeekableHandle :: String -> Handle -> (Handle__ -> IO a) -> IO a
+wantSeekableHandle fun handle act =
+ withHandle_ handle $ \ handle_ -> do
+ case haType__ handle_ of
+ ClosedHandle -> ioe_closedHandle fun handle
+ SemiClosedHandle -> ioe_closedHandle fun handle
+ _ -> act handle_
\end{code}
Internal function for creating an @IOError@ representing the
-access of a closed file.
+access to a closed file.
\begin{code}
+ioe_closedHandle :: String -> Handle -> IO a
+ioe_closedHandle fun h = ioError (IOException (IOError (Just h) IllegalOperation fun
+ "handle is closed"))
+\end{code}
+
+Internal helper functions for Concurrent Haskell implementation
+of IO:
-ioe_closedHandle :: Handle -> IO a
-ioe_closedHandle h = fail (IOError (Just h) IllegalOperation "handle is closed")
+\begin{code}
+mayBlock :: FILE_OBJECT -> IO Int -> IO Int
+mayBlock fo act = do
+ rc <- act
+ case rc of
+ -5 -> do -- (possibly blocking) read
+ fd <- getFileFd fo
+ threadWaitRead fd
+ mayBlock fo act -- input available, re-try
+ -6 -> do -- (possibly blocking) write
+ fd <- getFileFd fo
+ threadWaitWrite fd
+ mayBlock fo act -- output possible
+ -7 -> do -- (possibly blocking) write on connected handle
+ fd <- getConnFileFd fo
+ threadWaitWrite fd
+ mayBlock fo act -- output possible
+ _ -> do
+ return rc
+
+data MayBlock a
+ = BlockRead Int
+ | BlockWrite Int
+ | NoBlock a
+
+mayBlockRead :: String -> Handle -> (FILE_OBJECT -> IO Int) -> IO Int
+mayBlockRead fname handle fn = do
+ r <- wantReadableHandle fname handle $ \ handle_ -> do
+ let fo = haFO__ handle_
+ rc <- fn fo
+ case rc of
+ -5 -> do -- (possibly blocking) read
+ fd <- getFileFd fo
+ return (BlockRead fd)
+ -6 -> do -- (possibly blocking) write
+ fd <- getFileFd fo
+ return (BlockWrite fd)
+ -7 -> do -- (possibly blocking) write on connected handle
+ fd <- getConnFileFd fo
+ return (BlockWrite fd)
+ _ ->
+ if rc >= 0
+ then return (NoBlock rc)
+ else constructErrorAndFail fname
+ case r of
+ BlockRead fd -> do
+ threadWaitRead fd
+ mayBlockRead fname handle fn
+ BlockWrite fd -> do
+ threadWaitWrite fd
+ mayBlockRead fname handle fn
+ NoBlock c -> return c
+
+mayBlockRead' :: String -> Handle
+ -> (FILE_OBJECT -> IO Int)
+ -> (FILE_OBJECT -> Int -> IO a)
+ -> IO a
+mayBlockRead' fname handle fn io = do
+ r <- wantReadableHandle fname handle $ \ handle_ -> do
+ let fo = haFO__ handle_
+ rc <- fn fo
+ case rc of
+ -5 -> do -- (possibly blocking) read
+ fd <- getFileFd fo
+ return (BlockRead fd)
+ -6 -> do -- (possibly blocking) write
+ fd <- getFileFd fo
+ return (BlockWrite fd)
+ -7 -> do -- (possibly blocking) write on connected handle
+ fd <- getConnFileFd fo
+ return (BlockWrite fd)
+ _ ->
+ if rc >= 0
+ then do a <- io fo rc
+ return (NoBlock a)
+ else constructErrorAndFail fname
+ case r of
+ BlockRead fd -> do
+ threadWaitRead fd
+ mayBlockRead' fname handle fn io
+ BlockWrite fd -> do
+ threadWaitWrite fd
+ mayBlockRead' fname handle fn io
+ NoBlock c -> return c
+
+mayBlockWrite :: String -> Handle -> (FILE_OBJECT -> IO Int) -> IO Int
+mayBlockWrite fname handle fn = do
+ r <- wantWriteableHandle fname handle $ \ handle_ -> do
+ let fo = haFO__ handle_
+ rc <- fn fo
+ case rc of
+ -5 -> do -- (possibly blocking) read
+ fd <- getFileFd fo
+ return (BlockRead fd)
+ -6 -> do -- (possibly blocking) write
+ fd <- getFileFd fo
+ return (BlockWrite fd)
+ -7 -> do -- (possibly blocking) write on connected handle
+ fd <- getConnFileFd fo
+ return (BlockWrite fd)
+ _ ->
+ if rc >= 0
+ then return (NoBlock rc)
+ else constructErrorAndFail fname
+ case r of
+ BlockRead fd -> do
+ threadWaitRead fd
+ mayBlockWrite fname handle fn
+ BlockWrite fd -> do
+ threadWaitWrite fd
+ mayBlockWrite fname handle fn
+ NoBlock c -> return c
\end{code}
+
+Foreign import declarations of helper functions:
+
+\begin{code}
+
+#ifdef __HUGS__
+type Bytes = PrimByteArray RealWorld
+#else
+type Bytes = ByteArray#
+#endif
+
+foreign import "libHS_cbits" "inputReady" unsafe
+ inputReady :: FILE_OBJECT -> Int -> IO Int{-ret code-}
+foreign import "libHS_cbits" "fileGetc" unsafe
+ fileGetc :: FILE_OBJECT -> IO Int
+foreign import "libHS_cbits" "fileLookAhead" unsafe
+ fileLookAhead :: FILE_OBJECT -> IO Int
+foreign import "libHS_cbits" "readBlock" unsafe
+ readBlock :: FILE_OBJECT -> IO Int
+foreign import "libHS_cbits" "readLine" unsafe
+ readLine :: FILE_OBJECT -> IO Int
+foreign import "libHS_cbits" "readChar" unsafe
+ readChar :: FILE_OBJECT -> IO Int
+foreign import "libHS_cbits" "writeFileObject" unsafe
+ writeFileObject :: FILE_OBJECT -> Int -> IO Int{-ret code-}
+foreign import "libHS_cbits" "filePutc" unsafe
+ filePutc :: FILE_OBJECT -> Char -> IO Int{-ret code-}
+foreign import "libHS_cbits" "write_" unsafe
+ write_ :: FILE_OBJECT -> Addr -> Int -> IO Int{-ret code-}
+foreign import "libHS_cbits" "getBufStart" unsafe
+ getBufStart :: FILE_OBJECT -> Int -> IO Addr
+foreign import "libHS_cbits" "getWriteableBuf" unsafe
+ getWriteableBuf :: FILE_OBJECT -> IO Addr
+foreign import "libHS_cbits" "getBuf" unsafe
+ getBuf :: FILE_OBJECT -> IO Addr
+foreign import "libHS_cbits" "getBufWPtr" unsafe
+ getBufWPtr :: FILE_OBJECT -> IO Int
+foreign import "libHS_cbits" "setBufWPtr" unsafe
+ setBufWPtr :: FILE_OBJECT -> Int -> IO ()
+foreign import "libHS_cbits" "closeFile" unsafe
+ closeFile :: FILE_OBJECT -> Int{-Flush-} -> IO Int{-ret code-}
+foreign import "libHS_cbits" "fileEOF" unsafe
+ fileEOF :: FILE_OBJECT -> IO Int{-ret code-}
+foreign import "libHS_cbits" "setBuffering" unsafe
+ setBuffering :: FILE_OBJECT -> Int -> IO Int{-ret code-}
+foreign import "libHS_cbits" "flushFile" unsafe
+ flushFile :: FILE_OBJECT -> IO Int{-ret code-}
+foreign import "libHS_cbits" "flushConnectedBuf" unsafe
+ flushConnectedBuf :: FILE_OBJECT -> IO ()
+foreign import "libHS_cbits" "getBufferMode" unsafe
+ getBufferMode :: FILE_OBJECT -> IO Int{-ret code-}
+#ifdef __HUGS__
+foreign import "libHS_cbits" "seekFile_int64" unsafe
+ seekFile :: FILE_OBJECT -> Int -> Int64 -> IO Int
+#else
+foreign import "libHS_cbits" "seekFile" unsafe
+ seekFile :: FILE_OBJECT -> Int -> Int -> Bytes -> IO Int
+#endif
+
+foreign import "libHS_cbits" "seekFileP" unsafe
+ seekFileP :: FILE_OBJECT -> IO Int{-ret code-}
+foreign import "libHS_cbits" "setTerminalEcho" unsafe
+ setTerminalEcho :: FILE_OBJECT -> Int -> IO Int{-ret code-}
+foreign import "libHS_cbits" "getTerminalEcho" unsafe
+ getTerminalEcho :: FILE_OBJECT -> IO Int{-ret code-}
+foreign import "libHS_cbits" "isTerminalDevice" unsafe
+ isTerminalDevice :: FILE_OBJECT -> IO Int{-ret code-}
+foreign import "libHS_cbits" "setConnectedTo" unsafe
+ setConnectedTo :: FILE_OBJECT -> FILE_OBJECT -> Int -> IO ()
+foreign import "libHS_cbits" "ungetChar" unsafe
+ ungetChar :: FILE_OBJECT -> Char -> IO Int{-ret code-}
+foreign import "libHS_cbits" "readChunk" unsafe
+ readChunk :: FILE_OBJECT -> Addr -> Int -> Int -> IO Int{-ret code-}
+foreign import "libHS_cbits" "getFileFd" unsafe
+ getFileFd :: FILE_OBJECT -> IO Int{-fd-}
+#ifdef __HUGS__
+foreign import "libHS_cbits" "fileSize_int64" unsafe
+ fileSize_int64 :: FILE_OBJECT -> Bytes -> IO Int{-ret code-}
+#else
+foreign import "libHS_cbits" "fileSize" unsafe
+ fileSize :: FILE_OBJECT -> Bytes -> IO Int{-ret code-}
+#endif
+
+foreign import "libHS_cbits" "getFilePosn" unsafe
+ getFilePosn :: FILE_OBJECT -> IO Int
+foreign import "libHS_cbits" "setFilePosn" unsafe
+ setFilePosn :: FILE_OBJECT -> Int -> ByteArray# -> IO Int
+foreign import "libHS_cbits" "getConnFileFd" unsafe
+ getConnFileFd :: FILE_OBJECT -> IO Int{-fd-}
+foreign import "libHS_cbits" "getLock" unsafe
+ getLock :: Int{-Fd-} -> Int{-exclusive-} -> IO Int{-return code-}
+foreign import "libHS_cbits" "openStdFile" unsafe
+ openStdFile :: Int{-fd-} -> Int{-Readable?-} -> IO Addr{-file obj-}
+foreign import "libHS_cbits" "openFile" unsafe
+ primOpenFile :: ByteArray Int{-CString-}
+ -> Int{-How-}
+ -> Int{-Binary-}
+ -> IO Addr {-file obj-}
+foreign import "libHS_cbits" "const_BUFSIZ" unsafe
+ const_BUFSIZ :: Int
+
+foreign import "libHS_cbits" "setBinaryMode__" unsafe
+ setBinaryMode :: FILE_OBJECT -> Int -> IO Int
+\end{code}
+
+
projects / ghc-hetmet.git / blobdiff