/* ---------------------------------------------------------------------------
- * $Id: Schedule.c,v 1.102 2001/10/23 11:28:51 simonmar Exp $
+ * $Id: Schedule.c,v 1.108 2001/11/26 16:54:22 simonmar Exp $
*
* (c) The GHC Team, 1998-2000
*
#include "Stats.h"
#include "Itimer.h"
#include "Prelude.h"
+#ifdef PROFILING
+#include "Proftimer.h"
+#include "ProfHeap.h"
+#include "RetainerProfile.h"
+#endif
#if defined(GRAN) || defined(PAR)
# include "GranSimRts.h"
# include "GranSim.h"
*/
static StgTSO *suspended_ccalling_threads;
-static void GetRoots(evac_fn);
static StgTSO *threadStackOverflow(StgTSO *tso);
/* KH: The following two flags are shared memory locations. There is no need
* Locks required: sched_mutex.
*/
#ifdef SMP
-//@cindex free_capabilities
-//@cindex n_free_capabilities
Capability *free_capabilities; /* Available capabilities for running threads */
nat n_free_capabilities; /* total number of available capabilities */
#else
-//@cindex MainRegTable
-Capability MainRegTable; /* for non-SMP, we have one global capability */
+Capability MainCapability; /* for non-SMP, we have one global capability */
#endif
#if defined(GRAN)
}
}
-#else
+#else // not SMP
+
# if defined(PAR)
/* in GUM do this only on the Main PE */
if (IAmMainThread)
pthread_cond_signal(&thread_ready_cond);
}
}
-#endif /* SMP */
+#endif // SMP
+
+ /* check for signals each time around the scheduler */
+#ifndef mingw32_TARGET_OS
+ if (signals_pending()) {
+ startSignalHandlers();
+ }
+#endif
/* Check whether any waiting threads need to be woken up. If the
* run queue is empty, and there are no other tasks running, we
/* we can be interrupted while waiting for I/O... */
if (interrupted) continue;
- /* check for signals each time around the scheduler */
-#ifndef mingw32_TARGET_OS
- if (signals_pending()) {
- start_signal_handlers();
- }
-#endif
-
/*
* Detect deadlock: when we have no threads to run, there are no
* threads waiting on I/O or sleeping, and all the other tasks are
*/
ASSERT(run_queue_hd != END_TSO_QUEUE);
t = POP_RUN_QUEUE();
+
+ // Sanity check the thread we're about to run. This can be
+ // expensive if there is lots of thread switching going on...
IF_DEBUG(sanity,checkTSO(t));
#endif
free_capabilities = cap->link;
n_free_capabilities--;
#else
- cap = &MainRegTable;
+ cap = &MainCapability;
#endif
- cap->rCurrentTSO = t;
+ cap->r.rCurrentTSO = t;
/* context switches are now initiated by the timer signal, unless
* the user specified "context switch as often as possible", with
* +RTS -C0
*/
- if (RtsFlags.ConcFlags.ctxtSwitchTicks == 0
- && (run_queue_hd != END_TSO_QUEUE
- || blocked_queue_hd != END_TSO_QUEUE
- || sleeping_queue != END_TSO_QUEUE))
+ if (
+#ifdef PROFILING
+ RtsFlags.ProfFlags.profileInterval == 0 ||
+#endif
+ (RtsFlags.ConcFlags.ctxtSwitchTicks == 0
+ && (run_queue_hd != END_TSO_QUEUE
+ || blocked_queue_hd != END_TSO_QUEUE
+ || sleeping_queue != END_TSO_QUEUE)))
context_switch = 1;
else
context_switch = 0;
IF_DEBUG(scheduler, sched_belch("-->> Running TSO %ld (%p) %s ...",
t->id, t, whatNext_strs[t->what_next]));
+#ifdef PROFILING
+ startHeapProfTimer();
+#endif
+
/* +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ */
/* Run the current thread
*/
- switch (cap->rCurrentTSO->what_next) {
+ switch (cap->r.rCurrentTSO->what_next) {
case ThreadKilled:
case ThreadComplete:
/* Thread already finished, return to scheduler. */
ret = ThreadFinished;
break;
case ThreadEnterGHC:
- ret = StgRun((StgFunPtr) stg_enterStackTop, cap);
+ ret = StgRun((StgFunPtr) stg_enterStackTop, &cap->r);
break;
case ThreadRunGHC:
- ret = StgRun((StgFunPtr) stg_returnToStackTop, cap);
+ ret = StgRun((StgFunPtr) stg_returnToStackTop, &cap->r);
break;
case ThreadEnterInterp:
ret = interpretBCO(cap);
/* Costs for the scheduler are assigned to CCS_SYSTEM */
#ifdef PROFILING
+ stopHeapProfTimer();
CCCS = CCS_SYSTEM;
#endif
#elif !defined(GRAN) && !defined(PAR)
IF_DEBUG(scheduler,fprintf(stderr,"scheduler: "););
#endif
- t = cap->rCurrentTSO;
+ t = cap->r.rCurrentTSO;
#if defined(PAR)
/* HACK 675: if the last thread didn't yield, make sure to print a
switch (ret) {
case HeapOverflow:
#if defined(GRAN)
- IF_DEBUG(gran,
- DumpGranEvent(GR_DESCHEDULE, t));
+ IF_DEBUG(gran, DumpGranEvent(GR_DESCHEDULE, t));
globalGranStats.tot_heapover++;
#elif defined(PAR)
- // IF_DEBUG(par,
- //DumpGranEvent(GR_DESCHEDULE, t);
globalParStats.tot_heapover++;
#endif
+
+ // did the task ask for a large block?
+ if (cap->r.rHpAlloc > BLOCK_SIZE_W) {
+ // if so, get one and push it on the front of the nursery.
+ bdescr *bd;
+ nat blocks;
+
+ blocks = (nat)BLOCK_ROUND_UP(cap->r.rHpAlloc * sizeof(W_)) / BLOCK_SIZE;
+
+ IF_DEBUG(scheduler,belch("--<< thread %ld (%p; %s) stopped: requesting a large block (size %d)",
+ t->id, t,
+ whatNext_strs[t->what_next], blocks));
+
+ // don't do this if it would push us over the
+ // alloc_blocks_lim limit; we'll GC first.
+ if (alloc_blocks + blocks < alloc_blocks_lim) {
+
+ alloc_blocks += blocks;
+ bd = allocGroup( blocks );
+
+ // link the new group into the list
+ bd->link = cap->r.rCurrentNursery;
+ bd->u.back = cap->r.rCurrentNursery->u.back;
+ if (cap->r.rCurrentNursery->u.back != NULL) {
+ cap->r.rCurrentNursery->u.back->link = bd;
+ } else {
+ ASSERT(g0s0->blocks == cap->r.rCurrentNursery &&
+ g0s0->blocks == cap->r.rNursery);
+ cap->r.rNursery = g0s0->blocks = bd;
+ }
+ cap->r.rCurrentNursery->u.back = bd;
+
+ // initialise it as a nursery block
+ bd->step = g0s0;
+ bd->gen_no = 0;
+ bd->flags = 0;
+ bd->free = bd->start;
+
+ // don't forget to update the block count in g0s0.
+ g0s0->n_blocks += blocks;
+ ASSERT(countBlocks(g0s0->blocks) == g0s0->n_blocks);
+
+ // now update the nursery to point to the new block
+ cap->r.rCurrentNursery = bd;
+
+ // we might be unlucky and have another thread get on the
+ // run queue before us and steal the large block, but in that
+ // case the thread will just end up requesting another large
+ // block.
+ PUSH_ON_RUN_QUEUE(t);
+ break;
+ }
+ }
+
/* make all the running tasks block on a condition variable,
* maybe set context_switch and wait till they all pile in,
* then have them wait on a GC condition variable.
n_free_capabilities++;
#endif
+#ifdef PROFILING
+ if (RtsFlags.ProfFlags.profileInterval==0 || performHeapProfile) {
+ GarbageCollect(GetRoots, rtsTrue);
+ heapCensus();
+ performHeapProfile = rtsFalse;
+ ready_to_gc = rtsFalse; // we already GC'd
+ }
+#endif
+
#ifdef SMP
if (ready_to_gc && n_free_capabilities == RtsFlags.ParFlags.nNodes)
#else
G_CURR_THREADQ(0));
#endif /* GRAN */
}
+
#if defined(GRAN)
next_thread:
IF_GRAN_DEBUG(unused,
print_eventq(EventHd));
event = get_next_event();
-
#elif defined(PAR)
next_thread:
/* ToDo: wait for next message to arrive rather than busy wait */
-
-#else /* GRAN */
- /* not any more
- next_thread:
- t = take_off_run_queue(END_TSO_QUEUE);
- */
#endif /* GRAN */
+
} /* end of while(1) */
+
IF_PAR_DEBUG(verbose,
belch("== Leaving schedule() after having received Finish"));
}
* ------------------------------------------------------------------------- */
StgInt
-suspendThread( Capability *cap )
+suspendThread( StgRegTable *reg )
{
nat tok;
+ Capability *cap;
+
+ // assume that *reg is a pointer to the StgRegTable part of a Capability
+ cap = (Capability *)((void *)reg - sizeof(StgFunTable));
ACQUIRE_LOCK(&sched_mutex);
IF_DEBUG(scheduler,
- sched_belch("thread %d did a _ccall_gc", cap->rCurrentTSO->id));
+ sched_belch("thread %d did a _ccall_gc", cap->r.rCurrentTSO->id));
- threadPaused(cap->rCurrentTSO);
- cap->rCurrentTSO->link = suspended_ccalling_threads;
- suspended_ccalling_threads = cap->rCurrentTSO;
+ threadPaused(cap->r.rCurrentTSO);
+ cap->r.rCurrentTSO->link = suspended_ccalling_threads;
+ suspended_ccalling_threads = cap->r.rCurrentTSO;
/* Use the thread ID as the token; it should be unique */
- tok = cap->rCurrentTSO->id;
+ tok = cap->r.rCurrentTSO->id;
#ifdef SMP
cap->link = free_capabilities;
return tok;
}
-Capability *
+StgRegTable *
resumeThread( StgInt tok )
{
StgTSO *tso, **prev;
free_capabilities = cap->link;
n_free_capabilities--;
#else
- cap = &MainRegTable;
+ cap = &MainCapability;
#endif
- cap->rCurrentTSO = tso;
+ cap->r.rCurrentTSO = tso;
RELEASE_LOCK(&sched_mutex);
- return cap;
+ return &cap->r;
}
}
/* ---------------------------------------------------------------------------
+ * Fetching the ThreadID from an StgTSO.
+ *
+ * This is used in the implementation of Show for ThreadIds.
+ * ------------------------------------------------------------------------ */
+int rts_getThreadId(const StgTSO *tso)
+{
+ return tso->id;
+}
+
+/* ---------------------------------------------------------------------------
Create a new thread.
The new thread starts with the given stack size. Before the
}
#endif
-//@cindex initScheduler
+static void
+initCapability( Capability *cap )
+{
+ cap->f.stgChk0 = (F_)__stg_chk_0;
+ cap->f.stgChk1 = (F_)__stg_chk_1;
+ cap->f.stgGCEnter1 = (F_)__stg_gc_enter_1;
+ cap->f.stgUpdatePAP = (F_)__stg_update_PAP;
+}
+
void
initScheduler(void)
{
prev = NULL;
for (i = 0; i < RtsFlags.ParFlags.nNodes; i++) {
cap = stgMallocBytes(sizeof(Capability), "initScheduler:capabilities");
+ initCapability(cap);
cap->link = prev;
prev = cap;
}
}
IF_DEBUG(scheduler,fprintf(stderr,"scheduler: Allocated %d capabilities\n",
n_free_capabilities););
+#else
+ initCapability(&MainCapability);
#endif
#if defined(SMP) || defined(PAR)
KH @ 25/10/99
*/
-static void
+void
GetRoots(evac_fn evac)
{
StgMainThread *m;
projects / ghc-hetmet.git / blobdiff