TOP = @hardtop@
include $(TOP)/mk/project.mk
-include $(TOP)/mk/install.mk
################################################################################
#
# Whether to include GHCi in the compiler. Depends on whether the RTS linker
# has support for this OS/ARCH combination.
-OsSupportsGHCi=$(strip $(patsubst $(HostOS_CPP), YES, $(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin)))
+OsSupportsGHCi=$(strip $(patsubst $(HostOS_CPP), YES, $(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd dragonfly netbsd openbsd darwin)))
ArchSupportsGHCi=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc sparc64)))
ifeq "$(OsSupportsGHCi)$(ArchSupportsGHCi)" "YESYES"
RelocatableBuild = NO
endif
+# needs to be after $(RelocatableBuild) is set above
+include $(TOP)/mk/install.mk
+
# When building bindists we set this to yes so that the binaries are as
# portable as possible.
BeConservative = NO
# debug_p : debugging profiled
# thr_debug : debugging threaded
# thr_debug_p : debugging threaded profiled
-# t : ticky-ticky profiling
-# debug_t : debugging ticky-ticky profiling
# l : event logging
# thr_l : threaded and event logging
#
GhcLibHcOpts=-O2 -XGenerics
-# Win32 only: Enable the RTS and libraries to be built as DLLs
-DLLized=@EnableWin32DLLs@
-
# Strip local symbols from libraries? This can make the libraries smaller,
# but makes debugging somewhat more difficult. Doesn't work with all ld's.
#
DEFAULT_TMPDIR = /C/TEMP
endif
-BIN_DIST_TOPDIR_ABS=$(TOP)
-BIN_DIST_DIR=$(BIN_DIST_TOPDIR_ABS)/$(BIN_DIST_NAME)
-
-BIN_DIST_NAME=ghc-$(ProjectVersion)
-BIN_DIST_TAR=$(TOP)/$(BIN_DIST_NAME)-$(TARGETPLATFORM).tar
-BIN_DIST_TAR_BZ2=$(BIN_DIST_TAR).bz2
-BIN_DIST_PREP_DIR=$(TOP)/bindist-prep
-BIN_DIST_PREP=$(BIN_DIST_PREP_DIR)/$(BIN_DIST_NAME)
-BIN_DIST_LIST=$(TOP)/bindist-list
+BIN_DIST_NAME = ghc-$(ProjectVersion)
+BIN_DIST_PREP_DIR = bindistprep/$(BIN_DIST_NAME)
+BIN_DIST_PREP_TAR = bindistprep/$(BIN_DIST_NAME)-$(TARGETPLATFORM).tar
+BIN_DIST_PREP_TAR_BZ2 = $(BIN_DIST_PREP_TAR).bz2
+BIN_DIST_TAR_BZ2 = $(BIN_DIST_NAME)-$(TARGETPLATFORM).tar.bz2
+BIN_DIST_LIST = bindist-list
WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-i386-windows
WINDOWS_INSTALLER = $(WINDOWS_INSTALLER_BASE)$(exeext)
ghc_ge_609 = @ghc_ge_609@
ghc_ge_6102 = @ghc_ge_6102@
+ghc_ge_611 = @ghc_ge_611@
# Canonicalised ghc version number, used for easy (integer) version
# comparisons. We must expand $(GhcMinVersion) to two digits by
CONF_CC_OPTS += -G0
endif
-SRC_HSC2HS_OPTS += $(addprefix --cflag=,$(filter-out -O,$(SRC_CC_OPTS)))
+SRC_HSC2HS_OPTS += $(addprefix --cflag=,$(filter-out -O,$(SRC_CC_OPTS) $(CONF_CC_OPTS)))
SRC_HSC2HS_OPTS += $(foreach d,$(GMP_INCLUDE_DIRS),-I$(d))
#-----------------------------------------------------------------------------
# Mingwex Library
#
HaveLibMingwEx = @HaveLibMingwEx@
+DLLTOOL = inplace/mingw/bin/dlltool.exe
#-----------------------------------------------------------------------------
# Flex (currently unused, could be moved to glafp-utils)
# Other standard (ha!) Unix utilities
AR = @ArCmd@
+AR_OPTS = @ArArgs@
ArSupportsInput = @ArSupportsInput@
# Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
BASH = /usr/local/bin/bash
SED = @SedCmd@
SHELL = /bin/sh
-LD = @LdCmd@
+LD = @LdCmd@
+NM = @NmCmd@
# Some ld's support the -x flag and some don't, so the configure
# script detects which we have and sets LdXFlag to "-x" or ""
# ar: Bad file number
# see #3201. We need to specify a smaller max command-line size
# to work around it. 32767 doesn't work; 30000 does.
-ifeq "$(Windows)" "YES"
-XARGS = xargs -s 30000
-else
XARGS = xargs
+ifeq "$(Windows)" "YES"
+XARGS_OPTS = -s 30000
endif
#
HSTAGS = @HstagsCmd@
# Should we build haddock docs?
-HADDOCK_DOCS = YES
+HADDOCK_DOCS = $(GhcWithInterpreter)
# And HsColour the sources?
ifeq "$(HSCOLOUR)" ""
HSCOLOUR_SRCS = NO
HSCOLOUR_SRCS = YES
endif
-#
-# Options for compiling in different `ways'.
-#
-# To configure up your own way, have a look at some of the standard ways
-# such as profiling, and create your own set of WAY_*_OPTS defs below.
-# After having done that, add your way string to WAYS, and after having
-# run the configure script, the different projects will add the new way
-# to the list of ways they support.
-#
-
-#
-# Definitions of the different ways:
-#
-# * their name:
-# - tag, e.g., p
-# - description, e.g., profiling
-# * what they mean to the driver:
-# - WAY_p_HC_OPTS gives the list of command-line options
-# to the driver.
-#
-
-#
-# The ways currently defined.
-#
-ALL_WAYS=v p t l s mp mg debug dyn thr thr_l debug_dyn thr_dyn thr_debug_dyn thr_p thr_debug debug_p thr_debug_p
-
-#
-# The following ways currently have treated specially, p t mg,
-# as the driver script treats these guys specially and needs to carefully be told
-# about the options for these. Hence, we hide the required command line options
-# for these in the driver, as this is the only place they are needed.
-#
-# If you want to add to these default options, fill in the variables below:
-
-# Way 'v':
-WAY_v_NAME=vanilla
-WAY_v_HC_OPTS=
-
-# Way 'p':
-WAY_p_NAME=profiling
-WAY_p_HC_OPTS= -prof
-
-# Way 't':
-WAY_t_NAME=ticky-ticky profiling
-WAY_t_HC_OPTS= -ticky
-
-# Way 'l':
-WAY_l_NAME=event logging
-WAY_l_HC_OPTS= -eventlog
-
-# Way `mp':
-WAY_mp_NAME=parallel
-WAY_mp_HC_OPTS=-parallel
-
-# Way `mg':
-WAY_mg_NAME=GranSim
-WAY_mg_HC_OPTS=-gransim
-
-#
-# These ways apply to the RTS only:
-#
-
-# Way 'thr':
-WAY_thr_NAME=threaded
-WAY_thr_HC_OPTS=-optc-DTHREADED_RTS
-
-# Way 'thr_p':
-WAY_thr_p_NAME=threaded profiled
-WAY_thr_p_HC_OPTS=-optc-DTHREADED_RTS -prof
-
-# Way 'thr_l':
-WAY_thr_l_NAME=threaded event logging
-WAY_thr_l_HC_OPTS=-optc-DTHREADED_RTS -eventlog
-
-# Way 'debug':
-WAY_debug_NAME=debug
-WAY_debug_HC_OPTS=-optc-DDEBUG
-
-# Way 'debug_p':
-WAY_debug_p_NAME=debug profiled
-WAY_debug_p_HC_OPTS=-optc-DDEBUG -prof
-
-# Way 'debug_t':
-WAY_debug_t_NAME=debug ticky-ticky profiling
-WAY_debug_t_HC_OPTS= -ticky -optc-DDEBUG
-
-# Way 'thr_debug':
-WAY_thr_debug_NAME=threaded
-WAY_thr_debug_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG
-
-# Way 'thr_debug_p':
-WAY_thr_debug_p_NAME=threaded debug profiling
-WAY_thr_debug_p_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -prof
-
-# Way 'dyn': build dynamic shared libraries
-WAY_dyn_NAME=dyn
-WAY_dyn_HC_OPTS=-fPIC -dynamic
-
-# Way 'thr_dyn':
-WAY_thr_dyn_NAME=thr_dyn
-WAY_thr_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS
-
-# Way 'thr_debug_dyn':
-WAY_thr_debug_dyn_NAME=thr_dyn
-WAY_thr_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS -optc-DDEBUG
-
-# Way 'debug_dyn':
-WAY_debug_dyn_NAME=thr_dyn
-WAY_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DDEBUG
-
################################################################################
#
# 31-bit-Int Core files
#
################################################################################
-ifeq "$(Windows)" "YES"
BIN_DIST_INST_SUBDIR = "install dir"
-else
-# I very much doubt that paths with spaces will work on Unix
-BIN_DIST_INST_SUBDIR = installed
-endif
-
BIN_DIST_INST_DIR = $(TOP)/bindisttest/$(BIN_DIST_INST_SUBDIR)