#
################################################################################
-#
-# What parts to build: An fptools build tree does not have to be built
-# all in one go. By setting the list of ProjectsToBuild in build.mk you can
-# control which projects are built.
-#
-# Caution: the projects are built in the order given here, so if some
-# projects use others you must list them in the correct order.
-#
-# Generally: * glafp-utils should be first
-# * happy next
-# * ghc next
-# then it's up to you
+# BootingFromHc - build GHC and the libraries from .hc files?
+BootingFromHc = @BootingFromHc@
-ifeq "$(GhcWithHscBuiltViaC)" "YES"
-# need hslibs/lang first if we're bootstrapping
-ProjectsToBuild = glafp-utils hslibs ghc
+# build the libs first if we're bootstrapping from .hc files
+ifeq "$(BootingFromHc)" "YES"
+AllProjects = glafp-utils hslibs ghc green-card happy hdirect hood nofib
else
-ProjectsToBuild = glafp-utils ghc hslibs
+AllProjects = glafp-utils ghc hslibs green-card happy hdirect hood nofib
endif
+
+#
+# (OPTIONAL) set ProjectsToBuild to a list of projects to be built. If this
+# list is empty, then all projects present in the source tree will be built.
+#
+ProjectsToBuild =
+
#
-# Make a distinction between building and installing
+# set ProjectsDontInstall to a list of projects which are normally built but
+# not installed.
#
-ProjectsToInstall = glafp-utils ghc hslibs
+ProjectsDontInstall = glafp-utils nofib
#
# Should the various project tests directories be built?
#
# -dcore-lint check the types after every pass of the compiler;
# a pretty strong internal check
-GhcHcOpts=-O
+GhcHcOpts=-O -Rghc-timing
-# GhcWithHscBuiltViaC - build GHC compiler proper (\`hsc') from .hc files?
-GhcWithHscBuiltViaC=@BootingFromHc@
+# Build a compiler that will build *unregisterised* libraries and
+# binaries by default. Unregisterised code is supposed to compile and
+# run without any support for architecture-specific assembly mangling,
+# register assignment or tail-calls, and is therefore a good way to get
+# started when porting GHC to new architectures.
+#
+# If this is set to NO, you can still use the unregisterised way
+# (way 'u') to get unregisterised code, but the default way will be
+# registerised.
+#
+# NOTE: this is not the same as building the compiler itself
+# unregisterised. That's done by either (a) bootstrapping with a
+# compiler that was built with GhcUnregisterized=YES, or (b)
+# bootstrapping with a compiler that has way 'u' libraries, and the
+# flag '-unreg' is added to GhcHcOpts above.
+#
+GhcUnregisterised=NO
# Build a compiler with a native code generator backend
# (as well as a C backend)
#
# Target platforms supported:
# i386, alpha & sparc
-GhcWithNativeCodeGen=$(shell if (test x$(findstring $(HostArch_CPP),i386 alpha sparc) = x); then echo NO; else echo YES; fi)
+ifneq "$(findstring $(HostArch_CPP), i386 alpha sparc)" ""
+GhcWithNativeCodeGen=YES
+else
+GhcWithNativeCodeGen=NO
+endif
-# Include GHCi in the compiler
-ifeq "$(linux_TARGET_OS)" "1"
+HaveLibDL = @HaveLibDL@
+
+# Include GHCi in the compiler. Default to NO for the time being.
+
+ifneq "$(findstring $(HostOS_CPP), linux solaris freebsd netbsd openbsd)" ""
GhcWithInterpreter=YES
+ifeq "$(HaveLibDL)" "YES"
+SRC_HC_OPTS += -ldl
+endif
else
-ifeq "$(solaris_TARGET_OS)" "1"
-GhcWithInterpreter=YES
-else
-ifeq "$(freebsd_TARGET_OS)" "1"
-GhcWithInterpreter=YES
-else
-ifeq "$(netbsd_TARGET_OS)" "1"
-GhcWithInterpreter=YES
-else
GhcWithInterpreter=NO
endif
-endif
-endif
-endif
#
# Building various ways?
BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
-# Include compiler support for letting the compiler (optionally) report
-# your compilation to a central server for generation of fun stats.
-#
-GhcReportCompiles=NO
-
#------------------------------------------------------------------------------
# Options for GHC's Prelude
# In addition to the normal sequential way, the default is to also build
# profiled prelude libraries.
# When booting from .hc files, turn this off.
-ifeq "$(GhcWithHscBuiltViaC)" "YES"
+ifeq "$(BootingFromHc)" "YES"
GhcLibWays=
else
GhcLibWays=p
# -O is pretty desirable, otherwise no inlining of prelude
# things (incl "+") happens when compiling with this compiler
-GhcLibHcOpts=-O
+GhcLibHcOpts=-O -Rghc-timing
# Win32 only: Enable the RTS and libraries to be built as DLLs
-# Don't split object files for libs if we're building DLLs
-EnableWin32DLLs=@EnableWin32DLLs@
-ifeq "$(EnableWin32DLLs)" "YES"
-SplitObjs=NO
-else
+DLLized=@EnableWin32DLLs@
+
+# Don't split object files for libs if we're building DLLs, or booting from
+# .hc files.
SplitObjs=YES
-endif
+ifeq "$(DLLized)" "YES"
+SplitObjs=NO
+endif
+ifeq "$(BootingFromHc)" "YES"
+SplitObjs=NO
+endif
# Strip local symbols from libraries? This can make the libraries smaller,
# but makes debugging somewhat more difficult. Doesn't work with all ld's.
GhcRtsHcOpts=-O2
GhcRtsCcOpts=-O2 -optc-fomit-frame-pointer
+# Include the front panel code? Needs GTK+.
+GhcRtsWithFrontPanel = NO
+
################################################################################
#
# hslibs project
HsLibsFor = ghc
# hslibs for GHC also uses the following variables (defined above):
-# GhcLibWays, GhcLibHcOpts, GhcLibToolsHcOpts, EnableWin32DLLs, StripLibraries
+# GhcLibWays, GhcLibHcOpts, GhcLibToolsHcOpts, DLLized, StripLibraries
# Haskell compiler options for tools in hslibs
GhcLibToolsHcOpts=-O
#
ReadlineIncludePath=
+# Math library
+LIBM=@LIBM@
+
# Build the Haskell OpenGL/GLUT binding?
#
GhcLibsWithHOpenGL=@GhcLibsWithHOpenGL@
################################################################################
# Directory used by GHC (and possibly other tools) for storing
-# temporary files. If your /tmp isn't big enough, either override
+# temporary files. If your TMPDIR isn't big enough, either override
# this in build.mk or set your environment variable "TMPDIR" to point
# to somewhere with more space. (TMPDIR=. is a good choice).
# setting the TMPDIR env var would have no effect in the build tree.
DEFAULT_TMPDIR = /tmp
+ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
+DEFAULT_TMPDIR = C:/TEMP
+endif
+ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+DEFAULT_TMPDIR = C:/TEMP
+endif
# FPTOOLS_TOP: the top of the fptools hierarchy, absolute path.
FPTOOLS_TOP_ABS = @hardtop@
+ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
+FPTOOLS_TOP_ABS = $(subst \,/,$(shell cygpath -w @hardtop@))
+endif
+ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+FPTOOLS_TOP_ABS = $(subst \,/,$(shell cygpath -w @hardtop@))
+endif
#
# Installation directories, we don't use half of these,
ifeq "$(strip $(mandir))" ""
mandir = $(prefix)/man
endif
-
+
################################################################################
#
GREENCARD_PREFIX = $(FPTOOLS_TOP)/green-card/src/
UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/
-STAT2RESID_PREFIX = $(FPTOOLS_TOP)/ghc/utils/stat2resid/
HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/
HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hstags/
-
+HSC2HS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hsc2hs/
#-----------------------------------------------------------------------------
# Haskell compilers and mkdependHS
NHC = @NHC@
HC = @WithHc@
-MKDEPENDHS = $(HC)
+MKDEPENDHS = $(GHC)
# Sometimes we want to invoke ghc from the build tree in different
# projects (eg. it's handy to have a nofib & a ghc build in the same
endif
endif
+# default C compiler flags
+SRC_CC_OPTS = -O
+
#-----------------------------------------------------------------------------
# GMP Library (version 2.0.x or above)
#
HaveRegex = @HaveRegex@
#-----------------------------------------------------------------------------
+# GTK+
+
+GTK_CONFIG = @GTK_CONFIG@
+GTK_VERSION = @GTK_VERSION@
+
+#-----------------------------------------------------------------------------
# Flex
FLEX = @LEX@
#
INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
LATEX = latex
+HEVEA = hevea
+HACHA = hacha
LN_S = @LN_S@
MANMACROS = -man
MSMACROS = -ms
#
# Options to pass to Happy when we're going to compile the output with GHC
#
-GHC_HAPPY_OPTS = $(shell if expr $(HAPPY_VERSION) \< "1.8" >/dev/null; then echo -g; else echo -agc; fi)
+GHC_HAPPY_OPTS = $(shell if ( test `echo $(HAPPY_VERSION) | sed -e "s/\(.*\)\..*/\1/g"` "-gt" "1" || test `echo $(HAPPY_VERSION) | sed -e "s/.*\.\(.*\)/\1/g"` "-ge" "9" ); then echo -agc; else echo -g; fi)
#
# Stuff from fptools/literate
# Stuff from fptools/ghc/utils
#
UNLIT = $(UNLIT_PREFIX)unlit$(EXE_SUFFIX)
-STAT2RESID = $(STAT2RESID_PREFIX)stat2resid
HP2PS = $(HP2PS_PREFIX)hp2ps$(EXE_SUFFIX)
-HSCPP = $(HSCPP_PREFIX)hscpp
HSTAGS = $(HSTAGS_PREFIX)hstags
+HSC2HS = $(HSC2HS_PREFIX)hsc2hs-inplace
#
# Options for the compiling different `ways'. Various projects within
WAY_mg_NAME=GranSim
WAY_mg_HC_OPTS=-gransim
-# Way `dll':
-WAY_dll_NAME=Win32 DLLs
-WAY_dll_HC_OPTS=-dll
-
#
# Add user-way configurations here:
#