-#
+# -*-makefile-*-
# @configure_input@
#
-#################################################################################
+################################################################################
#
# config.mk.in-template
#
# a particular build.
#
#
-#################################################################################
+################################################################################
# The configuration is defined in two steps:
#
# included by boilerplate.mk (see boilerplate.mk for a list).
-#################################################################################
+################################################################################
#
# Project-wide platform variables
#
-#################################################################################
+################################################################################
# A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
# specifier. E.g. sparc-sun-solaris2
#
LeadingUnderscore=@LeadingUnderscore@
-# Pin a suffix on executables? If so, what. (cygwin32 only).
+# Pin a suffix on executables? If so, what (Windows only).
exeext=@exeext@
-#################################################################################
+################################################################################
#
# project-wide flags
#
# Set of options applicable to all fptools projects
#
-#################################################################################
+################################################################################
+
+# BootingFromHc - build GHC and the libraries from .hc files?
+BootingFromHc = @BootingFromHc@
+
+# build the libs first if we're bootstrapping from .hc files
+ifeq "$(BootingFromHc)" "YES"
+AllProjects = glafp-utils hslibs ghc green-card happy hdirect hood nofib
+else
+AllProjects = glafp-utils ghc hslibs green-card happy hdirect hood nofib
+endif
#
-# What parts to build: An fptools build tree does not have to be built
-# all in one go. By setting the list of ProjectsToBuild in build.mk you can
-# control which projects are built.
-#
-# Caution: the projects are built in the order given here, so if some
-# projects use others you must list them in the correct order.
+# (OPTIONAL) set ProjectsToBuild to a list of projects to be built. If this
+# list is empty, then all projects present in the source tree will be built.
#
-# Generally: * glafp-utils should be first
-# * happy next
-# * ghc next
-# then it's up to you
+ProjectsToBuild =
-ProjectsToBuild = glafp-utils ghc
#
-# Make a distinction between building and installing
+# set ProjectsDontInstall to a list of projects which are normally built but
+# not installed.
#
-ProjectsToInstall = glafp-utils ghc
+ProjectsDontInstall = glafp-utils nofib
#
# Should the various project tests directories be built?
#
IncludeTestDirsInBuild=NO
-#################################################################################
+################################################################################
#
# GHC project
#
# Set of (configurable) options needed by the ghc tree
# plus their default options (if any).
#
-#################################################################################
+################################################################################
#---------------------------------------------------------------
#
#
#---------------------------------------------------------------
-# Specify the Haskell compiler to be used to compile the compiler itself
-#
-# WithGhcHc Path name of the compiler to use
-#
-# WithGhcHcType What "type" of compiler is being used
-# Valid options:
-# HC_CHALMERS_HBC
-# HC_GLASGOW_GHC
-# HC_ROJEMO_NHC
-# HC_UNSPECIFIED
-
-WithGhcHc = @WithGhcHc@
+# The compiler used to build GHC is $(GHC). To change the actual compiler
+# used, re-configure with --with-ghc=<path-to-ghc>.
# Extra ways in which to build the compiler (for example, you might want to
# build a profiled compiler so you can see where it spends its time)
# Extra option flags to pass to the compiler that compiles the compiler
# (Ones that are essential are wired into ghc/compiler/Makefile)
# Typical ones:
-# -H25m allocate a bigger heap (default is 6m)
+# -H25m allocate a bigger heap (might speed up compilation)
#
# -O compile an optimised compiler
-# NB! If you add -O you'll almost certainly need to increase
-# the amount of heap space too (to 15m or more)
#
# -DDEBUG include consistency/assertion checks in the compiled compiler
#
# -dcore-lint check the types after every pass of the compiler;
# a pretty strong internal check
-GhcHcOpts=
-
-# GhcWithHscBuiltViaC - build GHC compiler proper (\`hsc') from .hc files?
-GhcWithHscBuiltViaC=@BootingFromHc@
-
-# Build hsc with -O and turn optimising flag on when compiling
-# the intermediate C file
-GhcUseGccForOptAsm=YES
+GhcHcOpts=-O -Rghc-timing
-# Compile intermediate C file with debugging options set.
-GhcUseGccForDebuggingAsm=YES
-
-# Build a registerised version of hsc and runtime
-# (you'd be desperate or silly not to).
-GhcWithRegisterised=YES
+# Build a compiler that will build *unregisterised* libraries and
+# binaries by default. Unregisterised code is supposed to compile and
+# run without any support for architecture-specific assembly mangling,
+# register assignment or tail-calls, and is therefore a good way to get
+# started when porting GHC to new architectures.
+#
+# If this is set to NO, you can still use the unregisterised way
+# (way 'u') to get unregisterised code, but the default way will be
+# registerised.
+#
+# NOTE: this is not the same as building the compiler itself
+# unregisterised. That's done by either (a) bootstrapping with a
+# compiler that was built with GhcUnregisterized=YES, or (b)
+# bootstrapping with a compiler that has way 'u' libraries, and the
+# flag '-unreg' is added to GhcHcOpts above.
+#
+GhcUnregisterised=NO
# Build a compiler with a native code generator backend
# (as well as a C backend)
#
# Target platforms supported:
# i386, alpha & sparc
-GhcWithNativeCodeGen=$(shell if (test x$(findstring $(HostArch_CPP),i386 alpha sparc) = x); then echo NO; else echo YES; fi)
+ifneq "$(findstring $(HostArch_CPP), i386 alpha sparc)" ""
+GhcWithNativeCodeGen=YES
+else
+GhcWithNativeCodeGen=NO
+endif
+
+HaveLibDL = @HaveLibDL@
+
+# Include GHCi in the compiler. Default to NO for the time being.
+
+ifneq "$(findstring $(HostOS_CPP), linux solaris freebsd netbsd openbsd)" ""
+GhcWithInterpreter=YES
+ifeq "$(HaveLibDL)" "YES"
+SRC_HC_OPTS += -ldl
+endif
+else
+GhcWithInterpreter=NO
+endif
#
# Building various ways?
# (right now, empty if not).
BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
-BuildingConcurrent=$(subst mc,YES,$(filter mc,$(WAYS)))
-BuildingProfiling=$(subst p,YES,$(filter p,$(WAYS)))
BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
-BuildingProfilingConcurrent=$(subst mr,YES,$(filter mr,$(WAYS)))
-#---------------------------------------------------------------
-#
-# Variables that control how the prelude libraries and runtime system are built
+#------------------------------------------------------------------------------
+# Options for GHC's Prelude
# What extra ways to build the libraries in
# In addition to the normal sequential way, the default is to also build
# profiled prelude libraries.
# When booting from .hc files, turn this off.
-ifeq "$(GhcWithHscBuiltViaC)" "YES"
+ifeq "$(BootingFromHc)" "YES"
GhcLibWays=
else
GhcLibWays=p
endif
# Option flags to pass to GHC when it's compiling prelude modules
+# *and* standard library modules (std) *and* modules in hslibs
# Typically these are things like -O or -dcore-lint
# The ones that are *essential* are wired into ghc/lib/Makefile
#
# -O is pretty desirable, otherwise no inlining of prelude
# things (incl "+") happens when compiling with this compiler
-ifeq "$(GhcWithHscBuiltViaC)" "YES"
-GhcLibHcOpts=-O
-else
-GhcLibHcOpts=-O -split-objs -odir $*
+GhcLibHcOpts=-O -Rghc-timing
+
+# Win32 only: Enable the RTS and libraries to be built as DLLs
+DLLized=@EnableWin32DLLs@
+
+# Don't split object files for libs if we're building DLLs, or booting from
+# .hc files.
+SplitObjs=YES
+
+ifeq "$(DLLized)" "YES"
+SplitObjs=NO
+endif
+ifeq "$(BootingFromHc)" "YES"
+SplitObjs=NO
endif
-# Build the Haskell Readline bindings?
+# Strip local symbols from libraries? This can make the libraries smaller,
+# but makes debugging somewhat more difficult. Doesn't work with all ld's.
#
-GhcLibsWithReadline=NO
+StripLibraries=NO
+
+# ----------------------------------------------------------------------------
+# Options for GHC's RTS
+
+# This is a good way to set things like -optc-g and -optc-DDEBUG for the RTS.
+# GhcRtsHcOpts is used when compiling .hc files and .c files.
+# GhcRtsCcOpts is used when compiling .c files only.
+
+# For a debugging RTS:
+# GhcRtsHcOpts = -optc-DDEBUG
+# GhcRtsCcOpts = -optc-g
+
+# For an optimised RTS:
+GhcRtsHcOpts=-O2
+GhcRtsCcOpts=-O2 -optc-fomit-frame-pointer
+
+# Include the front panel code? Needs GTK+.
+GhcRtsWithFrontPanel = NO
+
+################################################################################
#
-# Include path to readline.h
-# (no path == in standard include path)
+# hslibs project
#
-ReadlineIncludePath=
+################################################################################
-# Build the socket libraries? (ToDo: is this used?)
+# Build HsLibs for which compiler?
+
+# If $(HsLibsFor) == hugs or ghc, we assume we're building for the
+# compiler/interpreter in the same source tree.
+
+# HsLibsFor = ghc | hugs | nhc | hbc
+HsLibsFor = ghc
+
+# hslibs for GHC also uses the following variables (defined above):
+# GhcLibWays, GhcLibHcOpts, GhcLibToolsHcOpts, DLLized, StripLibraries
+
+# Haskell compiler options for tools in hslibs
+GhcLibToolsHcOpts=-O
+
+# Build the Haskell Readline bindings?
#
-GhcLibsWithSockets=YES
+GhcLibsWithReadline=@HaveReadlineHeaders@
-# Strip local symbols from libraries? This can make the libraries smaller,
-# but makes debugging somewhat more difficult. Doesn't work with all ld's.
+# Libraries needed for linking with readline
+LibsReadline=@LibsReadline@
+
+# Include path to readline.h
+# (no path == in standard include path)
#
-StripLibraries=NO
+ReadlineIncludePath=
-# Include compiler support for letting the compiler (optionally) report
-# your compilation to a central server for generation of fun stats.
+# Math library
+LIBM=@LIBM@
+
+# Build the Haskell OpenGL/GLUT binding?
#
-GhcReportCompiles=YES
+GhcLibsWithHOpenGL=@GhcLibsWithHOpenGL@
-#################################################################################
+################################################################################
#
# happy project
#
# Happy specific options
#
-#################################################################################
+################################################################################
# The compiler you'd like to use to compile Happy
-WithHappyHc = $(WithGhcHc)
+WithHappyHc = @WithHc@
# HappyHcOpts gives the flags to pass to the Haskell compiler used
# to compile the Happy sources with.
#
-HappyHcOpts =
+HappyHcOpts = -O
-#################################################################################
+################################################################################
#
# haggis project
#
# Haggis specific options
#
-#################################################################################
+################################################################################
-#################################################################################
+################################################################################
#
# green-card project
#
# Green-card specific options
#
-#################################################################################
+################################################################################
-#################################################################################
+################################################################################
#
# nofib project
#
# nofib specific options
#
-#################################################################################
+################################################################################
+WithNofibHc = $(GHC_INPLACE)
# NoFibSubDirs controls which set of tests should be run
# You can run one or more of
#
# ==============================================================================
-#################################################################################
+################################################################################
#
# Paths (see paths.mk)
#
-#################################################################################
+################################################################################
+
+# Directory used by GHC (and possibly other tools) for storing
+# temporary files. If your TMPDIR isn't big enough, either override
+# this in build.mk or set your environment variable "TMPDIR" to point
+# to somewhere with more space. (TMPDIR=. is a good choice).
-TMPDIR = /tmp
+# DEFAULT_TMPDIR isn't called TMPDIR because GNU make tends to
+# override an environment variable with the value of the make variable
+# of the same name (if it exists) when executing sub-processes, so
+# setting the TMPDIR env var would have no effect in the build tree.
+
+DEFAULT_TMPDIR = /tmp
+ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
+DEFAULT_TMPDIR = C:/TEMP
+endif
+ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+DEFAULT_TMPDIR = C:/TEMP
+endif
# FPTOOLS_TOP: the top of the fptools hierarchy, absolute path.
FPTOOLS_TOP_ABS = @hardtop@
+ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
+FPTOOLS_TOP_ABS = $(subst \,/,$(shell cygpath -w @hardtop@))
+endif
+ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+FPTOOLS_TOP_ABS = $(subst \,/,$(shell cygpath -w @hardtop@))
+endif
#
# Installation directories, we don't use half of these,
# but since the configure script has them on offer while
# passing through, we might as well set them.
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-bindir = @bindir@
-#UNUSED, see below: libexecdir = @libexecdir@
-datadir = @datadir@
-#sysconfdir = @datadir@
-#sharedstatedir = @sharedstatedir@
-#localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-includedir = @includedir@
-oldincludedir = @oldincludedir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+bindir = @bindir@
+datadir = @datadir@
+#sysconfdir = @datadir@
+#sharedstatedir = @sharedstatedir@
+#localstatedir = @localstatedir@
+libdir = @libdir@
+includedir = @includedir@
+oldincludedir = @oldincludedir@
mandir = @mandir@
+
+#UNUSED, see below: libexecdir = @libexecdir@
+#UNUSED:infodir = @infodir@
#UNUSED:srcdir = @srcdir@
#
ifeq "$(strip $(libdir))" ""
libdir = $(exec_prefix)/lib
endif
-ifeq "$(strip $(infodir))" ""
-infodir = $(prefix)/info
-endif
ifeq "$(strip $(includedir))" ""
includedir = $(prefix)/include
endif
ifeq "$(strip $(mandir))" ""
mandir = $(prefix)/man
endif
-
-#################################################################################
+
+################################################################################
#
# Utilities programs: flags
#
-#################################################################################
+################################################################################
# If you want to give any standard flags to pretty much any utility
# (see utils.mk for a complete list), by adding a line here
# SRC_HC_OPTS += -O
-#################################################################################
+################################################################################
#
# Utilities programs: where to find them
#
-#################################################################################
+################################################################################
#-----------------------------------------------------------------------------
# FPtools Utility locations
MSUB_PREFIX = $(GLAFP_UTILS)/msub/
LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/
MKDIRHIER_PREFIX = $(GLAFP_UTILS)/mkdirhier/
-
-# Still used?
-LITERATE = $(FPTOOLS_TOP)/literate
+DOCBOOK_PREFIX = $(GLAFP_UTILS)/docbook/
LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/
-INFO_PREFIX = $(FPTOOLS_TOP)/literate/info-utils/
-TEXI2HTML_PREFIX = $(LITERATE_PREFIX)texi2html/
HAPPY_PREFIX = $(FPTOOLS_TOP)/happy/src/
GREENCARD_PREFIX = $(FPTOOLS_TOP)/green-card/src/
-RTS_PREFIX = $(FPTOOLS_TOP)/common-rts/
-
UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/
-UGEN_PREFIX = $(FPTOOLS_TOP)/ghc/utils/ugen/
-STAT2RESID_PREFIX = $(FPTOOLS_TOP)/ghc/utils/stat2resid/
HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/
-HSCPP_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hscpp/
HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hstags/
-
+HSC2HS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hsc2hs/
#-----------------------------------------------------------------------------
-# Haskell compiler and mkdependHS
+# Haskell compilers and mkdependHS
+
+# $(GHC), $(HBC) and $(NHC) point to installed versions of the relevant
+# compilers, if available.
+#
+# $(HC) is a generic Haskell 98 compiler, set to $(GHC) by default.
+# $(MKDEPENDHS) is the Haskell dependency generator (ghc -M).
+#
+# NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead
+# (because the version numbers have to be calculated).
+
+GHC = @WithGhc@
+GhcVersion = @GhcVersion@
+GhcMajVersion = @GhcMajVersion@
+GhcMinVersion = @GhcMinVersion@
+GhcPatchLevel = @GhcPatchLevel@
+
+HBC = @HBC@
+NHC = @NHC@
+
+HC = @WithHc@
+MKDEPENDHS = $(GHC)
-HC = $(FPTOOLS_TOP)/ghc/driver/ghc
-MKDEPENDHS = $(HC)
+# Sometimes we want to invoke ghc from the build tree in different
+# projects (eg. it's handy to have a nofib & a ghc build in the same
+# tree). We can refer to "this ghc" as $(GHC_INPLACE):
+
+GHC_INPLACE = $(FPTOOLS_TOP)/ghc/compiler/ghc-inplace
#-----------------------------------------------------------------------------
# C compiler
endif
endif
+# default C compiler flags
+SRC_CC_OPTS = -O
+
#-----------------------------------------------------------------------------
-# GMP Library
+# GMP Library (version 2.0.x or above)
#
HaveLibGmp = @HaveLibGmp@
LibGmp = @LibGmp@
#-----------------------------------------------------------------------------
+# Regex library
+# (if present in libc use that one, otherwise use the one in the tree)
+#
+HaveRegex = @HaveRegex@
+
+#-----------------------------------------------------------------------------
+# GTK+
+
+GTK_CONFIG = @GTK_CONFIG@
+GTK_VERSION = @GTK_VERSION@
+
+#-----------------------------------------------------------------------------
# Flex
FLEX = @LEX@
CP = cp
CPP = @CPP@
CTAGS = $(ETAGS)
-RAWCPP = @RAWCPP@
+RAWCPP = $(CPP) -undef -traditional
+FIND = @FindCmd@
INSTALL = @INSTALL@
#
# Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
#
INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
LATEX = latex
+HEVEA = hevea
+HACHA = hacha
LN_S = @LN_S@
MANMACROS = -man
MSMACROS = -ms
# We do not use SHELL to execute long commands, as `make' will more than likely
# override whatever setting you have in your environment while executing.
-# By default, REAL_SHELL is set equal SHELL, which is not really a smart move
-# as it SHELL that will show up the bogosity in the first place, but setting
+# By default, REAL_SHELL is set equal to SHELL, which is not really a smart move
+# as it is SHELL that will show up the bogosity in the first place, but setting
# it to anything else isn't really portable.
#
# ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
ZIP = zip
#
-# Under cygwin32, we have to deal with .exe suffixes
+# Under Windows, we have to deal with .exe suffixes
#
-EXE_SUFFIX=@ExeSuffix@
+EXE_SUFFIX=@exeext@
#
# This is special to literate/, ToDo: add literate-specific
YACC = @YaccCmd@
#-----------------------------------------------------------------------------
-# SGML stuff (currently not configured - we assume you have it)
+# SGML stuff
+
+JADE = @JadeCmd@
+
+SGML2DVI = $(DOCBOOK_PREFIX)db2dvi
+SGML2HTML = $(DOCBOOK_PREFIX)db2html
+SGML2PS = $(DOCBOOK_PREFIX)db2ps
+SGML2PDF = $(DOCBOOK_PREFIX)db2pdf
+SGML2RTF = $(DOCBOOK_PREFIX)db2rtf
-SGML2LATEX = sgml2latex
-SGML2HTML = sgml2html
-SGML2INFO = sgml2info
-SGML2TXT = sgml2txt
+SGMLSTYLESHEET = $(FPTOOLS_TOP_ABS)/docs/fptools-both.dsl
+
+SRC_SGML2DVI_OPTS = -d $(SGMLSTYLESHEET)
+SRC_SGML2HTML_OPTS = -d $(SGMLSTYLESHEET)
+SRC_SGML2PS_OPTS = -d $(SGMLSTYLESHEET)
+SRC_SGML2RTF_OPTS = -d $(SGMLSTYLESHEET)
+
+DOCBOOK_CATALOG = @Catalog@
#-----------------------------------------------------------------------------
# FPtools support software
ETAGS = $(ETAGS_PREFIX)etags
VERBATIM = $(VERBATIM_PREFIX)verbatim
SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb
-SGML2LATEX = sgml2latex
RUNTEST = $(RUNTEST_PREFIX)runstdtest
-HAPPY = @HappyCmd@
-HAPPY_VERSION = @HappyVersion@
LX = @LxCmd@
GREENCARD = $(FPTOOLS_TOP)/green-card/src/green-card
+BLD_DLL = dllwrap
+
+#
+# Happy
+#
+HAPPY = @HappyCmd@
+HAPPY_VERSION = @HappyVersion@
+#
+# Options to pass to Happy when we're going to compile the output with GHC
+#
+GHC_HAPPY_OPTS = $(shell if ( test `echo $(HAPPY_VERSION) | sed -e "s/\(.*\)\..*/\1/g"` "-gt" "1" || test `echo $(HAPPY_VERSION) | sed -e "s/.*\.\(.*\)/\1/g"` "-ge" "9" ); then echo -agc; else echo -g; fi)
+
#
# Stuff from fptools/literate
#
-INFO = $(UTIL_PREFIX)info
-MAKEINFO = $(INFO_PREFIX)makeinfo
-POSTMAKEINFO = $(INFO_PREFIX)postmakeinfo
LIT2PGM = $(LITERATE_PREFIX)lit2pgm
-LIT2TEXI = $(LITERATE_PREFIX)lit2texi
LIT2HTML = $(LITERATE_PREFIX)lit2html
LIT2LATEX = $(LITERATE_PREFIX)lit2latex
MKDEPENDLIT = $(LITERATE_PREFIX)mkdependlit
LIT2CHANGELOG = $(LITERATE_PREFIX)lit2changelog
LIT2TEXT = $(LITERATE_PREFIX)lit2text
-TEXI2HTML = $(TEXI2HTML_PREFIX)texi2html
#
# Stuff from fptools/ghc/utils
#
-UNLIT = $(UNLIT_PREFIX)unlit
-UGEN = $(UGEN_PREFIX)ugen
-STAT2RESID = $(STAT2RESID_PREFIX)stat2resid
-HP2PS = $(HP2PS_PREFIX)hp2ps
-HSCPP = $(HSCPP_PREFIX)hscpp
+UNLIT = $(UNLIT_PREFIX)unlit$(EXE_SUFFIX)
+HP2PS = $(HP2PS_PREFIX)hp2ps$(EXE_SUFFIX)
HSTAGS = $(HSTAGS_PREFIX)hstags
+HSC2HS = $(HSC2HS_PREFIX)hsc2hs-inplace
#
# Options for the compiling different `ways'. Various projects within
#
# The ways currently defined.
#
-ALL_WAYS=p t u mc mr mt mp mg 1s 2s du a b c d e f g h i j k l m n o A B
+ALL_WAYS=p t u s mp mg a b c d e f g h i j k l m n o A B
+USER_WAYS=a b c d e f g h i j k l m n o A B
#
-# The following ways currently have treated specially, p u t mc mt my mp mg 1s 2d du,
+# The following ways currently have treated specially, p u t mg,
# as the driver script treats these guys specially and needs to carefully be told
# about the options for these. Hence, we hide the required command line options
# for these in the ghc/driver, as this is the only place they are needed.
#
# If you want to add to these default options, fill in the variables below:
-#
+
+# Way 'p':
WAY_p_NAME=profiling
WAY_p_HC_OPTS= -prof
-# Way t:
+# Way 't':
WAY_t_NAME=ticky-ticky profiling
WAY_t_HC_OPTS= -ticky
# Way `u':
WAY_u_NAME=unregisterized (using portable C only)
-WAY_u_HC_OPTS=
+WAY_u_HC_OPTS=-unreg
-# Way `mc': concurrent
-WAY_mc_NAME=concurrent
-WAY_mc_HC_OPTS=-concurrent
-
-# Way `mr':
-WAY_mr_NAME=profiled concurrent
-WAY_mr_HC_OPTS=-prof -concurrent
-
-# Way `mt':
-WAY_mt_NAME=ticky-ticky concurrent
-WAY_mt_HC_OPTS=-ticky -concurrent
+# Way `s':
+WAY_s_NAME=threads (for SMP)
+WAY_s_HC_OPTS=-smp
# Way `mp':
WAY_mp_NAME=parallel
WAY_mp_HC_OPTS=-parallel
-#
# Way `mg':
-#
WAY_mg_NAME=GranSim
WAY_mg_HC_OPTS=-gransim
#
-# Ways for different garbage collectors
-#
-WAY_2s_NAME=2-space GC
-WAY_2s_HC_OPTS=-2s
-
-WAY_1s_NAME=1-space GC
-WAY_1s_HC_OPTS=-1s
-
-WAY_du_NAME=dual-mode GC
-WAY_du_HC_OPTS=-du
-
-#
# Add user-way configurations here:
#
WAY_A_NAME=