#
################################################################################
#
-# config.mk.in-template
+# config.mk.in
#
-# This file defines all the variables that set the configuration of
-# a particular build.
+# This file supplies defaults for many tweakable build configuration
+# options. Some of the defaults are filled in by the autoconf-generated
+# configure script.
#
+# DO NOT EDIT THIS FILE!
#
-################################################################################
-
-# The configuration is defined in two steps:
-#
-# 1. The builder (i.e. the person doing the build)
-# copies this file, config.mk.in-template
-# to config.mk.in
+# - config.mk is auto-generated from config.mk.in by configure.
+# This may be triggered automatically by the build system (say
+# if config.mk.in has changed more recently than config.mk),
+# so if you edit config.mk your changes will be spammed.
#
-# 2. S/he then edits it manually (gasp) to reflect any configuration
-# options s/he wants.
+# - Settings in this file may be overriden by giving replacement
+# definitions in build.mk. See build.mk.sample for a good
+# starting point for a build.mk file.
#
-# 3. Then s/he runs "configure", which generates config.mk from
-# config.mk.in, substituting for system/platform-dependent things
-# enclosed in @at-signs@.
+# If you don't have a build.mk file then you get defaults for everything.
+# The defaults should provide a reasonable vanilla build.
#
# This is one of only two files that configure generates (the other is config.h)
#
-# Note that after subsequent edits of config.mk.in for a build, the configure script
-# will have to be re-run manually to have the change reflected in config.mk.
-#
-
-# There is a section below for each project within the fptools suite
-#
-# PLUS
-#
-# a section corresponding to each of the main .mk files
-# included by boilerplate.mk (see boilerplate.mk for a list).
-
-
-################################################################################
-#
-# Project-wide platform variables
-#
-################################################################################
-
-# A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
-# specifier. E.g. sparc-sun-solaris2
-
-HOSTPLATFORM = @HostPlatform@
-TARGETPLATFORM = @TargetPlatform@
-BUILDPLATFORM = @HostPlatform@
-
-# Hack alert:
-# in one or two places, we need to get at the OS version (major and perhaps even minor),
-# HostOS_Full is the OS name reported by AC_CANONICAL_SYSTEM.
-#
-HostPlatform_CPP = @HostPlatform_CPP@
-HostArch_CPP = @HostArch_CPP@
-HostOS_CPP = @HostOS_CPP@
-HostOS_Full = @HostOS_Full@
-HostVendor_CPP = @HostVendor_CPP@
-
-#
-# ToDo: check if these can be purged now. -- sof
-#
-
-@HostPlatform_CPP@_HOST = 1
-@HostPlatform_CPP@_TARGET = 1
-@HostPlatform_CPP@_BUILD = 1
-
-@HostArch_CPP@_HOST_ARCH = 1
-@HostArch_CPP@_TARGET_ARCH = 1
-@HostArch_CPP@_BUILD_ARCH = 1
-
-@HostOS_CPP@_HOST_OS = 1
-@HostOS_CPP@_TARGET_OS = 1
-@HostOS_CPP@_BUILD_OS = 1
-@HostVendor_CPP@_HOST_VENDOR = 1
-@HostVendor_CPP@_TARGET_VENDOR = 1
-@HostVendor_CPP@_BUILD_VENDOR = 1
+ifneq "$(findstring 3.7, $(MAKE_VERSION))" ""
+ifeq "$(findstring 3.79.1, $(MAKE_VERSION))" ""
+$(error GNU make version 3.79.1 or later is required.)
+endif
+endif
-# Leading underscores on symbol names in object files
-# Valid options: YES/NO
-#
-LeadingUnderscore=@LeadingUnderscore@
+# TOP: the top of the fptools hierarchy, absolute path.
+# On Windows this is a c:/foo/bar style path.
+TOP = @hardtop@
-# Pin a suffix on executables? If so, what (Windows only).
-exeext=@exeext@
+include $(TOP)/mk/project.mk
################################################################################
#
-# project-wide flags
-#
-# Set of options applicable to all fptools projects
+# Global configuration options
#
################################################################################
# BootingFromHc - build GHC and the libraries from .hc files?
BootingFromHc = @BootingFromHc@
-# build the libs first if we're bootstrapping from .hc files
-ifeq "$(BootingFromHc)" "YES"
-AllProjects = glafp-utils hslibs ghc green-card happy hdirect hood nofib
-else
-AllProjects = glafp-utils ghc hslibs green-card happy hdirect hood nofib
-endif
+# BootingFromUnregisterisedHc - treat .hc files as containing unregisterised
+# rather than registerised code, i.e., disable the mangler?
+BootingFromUnregisterisedHc = @BootingFromUnregisterisedHc@
-#
-# (OPTIONAL) set ProjectsToBuild to a list of projects to be built. If this
-# list is empty, then all projects present in the source tree will be built.
-#
-ProjectsToBuild =
+NO_INCLUDE_DEPS = NO
+NO_INCLUDE_PKGDATA = NO
-#
-# set ProjectsDontInstall to a list of projects which are normally built but
-# not installed.
-#
-ProjectsDontInstall = glafp-utils nofib
+# Should we build latex docs?
+LATEX_DOCS = NO
+# Mac OS X deployment target (to cross-compile for older OS versions)
#
-# Should the various project tests directories be built?
-#
-IncludeTestDirsInBuild=NO
+MACOSX_DEPLOYMENT_VERSION = @MACOSX_DEPLOYMENT_VERSION@
+MACOSX_DEPLOYMENT_SDK = @MACOSX_DEPLOYMENT_SDK@
-################################################################################
+ifneq "$(MACOSX_DEPLOYMENT_VERSION)" ""
+MACOSX_DEPLOYMENT_CC_OPTS = -mmacosx-version-min=$(MACOSX_DEPLOYMENT_VERSION) \
+ -isysroot $(MACOSX_DEPLOYMENT_SDK) \
+ --no-builtin-fprintf
+MACOSX_DEPLOYMENT_LD_OPTS = -mmacosx-version-min=$(MACOSX_DEPLOYMENT_VERSION) \
+ -Wl,-syslibroot,$(MACOSX_DEPLOYMENT_SDK)
+# We don't extend SRC_CC_OPTS and friends here directly, as (a) they may get
+# overwritten in build.mk and (b) we must not use the deployment options in
+# stage 1 or we get a linker error if the bootstrap compiler is for a more
+# recent OS version.
#
-# GHC project
-#
-# Set of (configurable) options needed by the ghc tree
-# plus their default options (if any).
-#
-################################################################################
+# We need --no-builtin-fprintf, as the use of the builtin function optimisation
+# for fprintf together with #include "PosixSource" in the RTS leads to the
+# use of fwrite$UNIX2003 (with GCC 4.0.1 on Mac OS X 10.5.2).
+endif
-#---------------------------------------------------------------
+################################################################################
#
# Variables that control how the compiler itself is built
#
-#---------------------------------------------------------------
+################################################################################
# The compiler used to build GHC is $(GHC). To change the actual compiler
# used, re-configure with --with-ghc=<path-to-ghc>.
GhcCompilerWays=
# Extra option flags to pass to the compiler that compiles the compiler
-# (Ones that are essential are wired into ghc/compiler/Makefile)
-# Typical ones:
-# -H25m allocate a bigger heap (might speed up compilation)
+# (Ones that are essential are wired into compiler/Makefile)
+# Typical options to use here:
#
-# -O compile an optimised compiler
-#
-# -DDEBUG include consistency/assertion checks in the compiled compiler
+# -DDEBUG include debugging code and assertions (will make the
+# compiler slower and produce debugging output, but useful
+# for development)
#
# -dcore-lint check the types after every pass of the compiler;
-# a pretty strong internal check
-GhcHcOpts=-O -Rghc-timing
+# a pretty strong internal check of the compiler being
+# used to compile GHC. Useful when bootstrapping.
+GhcHcOpts=-Rghc-timing
+
+# Extra options added to specific stages of the compiler bootstrap.
+# These are placed later on the command line, and may therefore
+# override options from $(GhcHcOpts).
+GhcStage1HcOpts=
+GhcStage2HcOpts=-O2
+GhcStage3HcOpts=-O2
+
+GhcProfiled=NO
+GhcDebugged=NO
+GhcLibProfiled=$(if $(filter p,$(GhcLibWays)),YES,NO)
+
+# Build shared and/or static libs?
+BuildSharedLibs=@BuildSharedLibs@
+# ToDo later:
+# BuildStaticLibs=@BuildStaticLibs@
# Build a compiler that will build *unregisterised* libraries and
# binaries by default. Unregisterised code is supposed to compile and
# (way 'u') to get unregisterised code, but the default way will be
# registerised.
#
-# NOTE: this is not the same as building the compiler itself
-# unregisterised. That's done by either (a) bootstrapping with a
-# compiler that was built with GhcUnregisterized=YES, or (b)
-# bootstrapping with a compiler that has way 'u' libraries, and the
-# flag '-unreg' is added to GhcHcOpts above.
+# NOTE: the stage1 compiler will be a registerised binary (assuming
+# the compiler you build with is generating registerised binaries), but
+# the stage2 compiler will be an unregisterised binary.
#
+ifneq "$(findstring $(HostArch_CPP), alpha hppa)" ""
+GhcUnregisterised=YES
+else
GhcUnregisterised=NO
+endif
# Build a compiler with a native code generator backend
# (as well as a C backend)
#
# Target platforms supported:
-# i386, alpha & sparc
-ifneq "$(findstring $(HostArch_CPP), i386 alpha sparc)" ""
-GhcWithNativeCodeGen=YES
-else
-GhcWithNativeCodeGen=NO
-endif
+# i386, powerpc
+# AIX is not supported
+ArchSupportsNCG=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc)))
+OsSupportsNCG=$(strip $(patsubst $(HostOS_CPP), YES, $(patsubst aix,,$(HostOS_CPP))))
+
+# lazy test, because $(GhcUnregisterised) might be set in build.mk later.
+GhcWithNativeCodeGen=$(strip\
+ $(if $(filter YESYESNO,\
+ $(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)),YES,NO))
HaveLibDL = @HaveLibDL@
-# Include GHCi in the compiler. Default to NO for the time being.
+# ArchSupportsSMP should be set iff there is support for that arch in
+# includes/SMP.h
+ArchSupportsSMP=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 sparc powerpc)))
+
+# lazy test, because $(GhcUnregisterised) might be set in build.mk later.
+GhcWithSMP=$(strip $(if $(filter YESNO, $(ArchSupportsSMP)$(GhcUnregisterised)),YES,NO))
+
+# Whether to include GHCi in the compiler. Depends on whether the RTS linker
+# has support for this OS/ARCH combination.
+
+OsSupportsGHCi=$(strip $(patsubst $(HostOS_CPP), YES, $(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin)))
+ArchSupportsGHCi=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc sparc64)))
-ifneq "$(findstring $(HostOS_CPP), mingw32 linux solaris2 freebsd netbsd openbsd)" ""
+ifeq "$(OsSupportsGHCi)$(ArchSupportsGHCi)" "YESYES"
GhcWithInterpreter=YES
-ifeq "$(HaveLibDL)" "YES"
-SRC_HC_OPTS += -ldl
-endif
else
GhcWithInterpreter=NO
endif
+# GhcEnableTablesNextToCode tells us whether the target architecture
+# supports placing info tables directly before the entry code
+# (see TABLES_NEXT_TO_CODE in the RTS). Whether we actually compile for
+# TABLES_NEXT_TO_CODE depends on whether we're building unregisterised
+# code or not, which may be decided by options to the compiler later.
+ifneq "$(findstring $(TargetArch_CPP)X, ia64X powerpc64X)" ""
+GhcEnableTablesNextToCode=NO
+else
+GhcEnableTablesNextToCode=YES
+endif
+
+# On Windows we normally want to make a relocatable bindist, to we
+# ignore flags like libdir
+ifeq "$(Windows)" "YES"
+RelocatableBuild = YES
+else
+RelocatableBuild = NO
+endif
+
+# When building bindists we set this to yes so that the binaries are as
+# portable as possible.
+BeConservative = NO
+
#
# Building various ways?
# (right now, empty if not).
BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
-#------------------------------------------------------------------------------
-# Options for GHC's Prelude
-
-# What extra ways to build the libraries in
-# In addition to the normal sequential way, the default is to also build
-# profiled prelude libraries.
-# When booting from .hc files, turn this off.
-ifeq "$(BootingFromHc)" "YES"
-GhcLibWays=
-else
-GhcLibWays=p
-endif
-
-# Option flags to pass to GHC when it's compiling prelude modules
-# *and* standard library modules (std) *and* modules in hslibs
-# Typically these are things like -O or -dcore-lint
-# The ones that are *essential* are wired into ghc/lib/Makefile
+# Interface file version (hi-boot files only)
#
-# -O is pretty desirable, otherwise no inlining of prelude
-# things (incl "+") happens when compiling with this compiler
-
-GhcLibHcOpts=-O -Rghc-timing
-
-# Win32 only: Enable the RTS and libraries to be built as DLLs
-DLLized=@EnableWin32DLLs@
-
-# Win32 only: are we building a compiler that tries to reduce external
-# dependencies? i.e., one that doesn't assume that the user has got
-# the cygwin toolchain installed on his/her Win32 box.
+# A GHC built with HscIfaceFileVersion=n will look for
+# M.hi-boot-n, and only then for
+# M.hi-boot.
+# (It'll be happy with the latter if the former doesn't exist.)
#
-# GHC is still dependent on GNU tools in the backend (gcc to further process
-# .c/.hc/.s/.o files + 'perl' to mangle and split), but using this
-# option a GHC distribution can be put together which includes a minimal
-# set of these open source tools.
#
-MinimalUnixDeps=@MinimalUnixDeps@
-
-# Don't split object files for libs if we're building DLLs, or booting from
-# .hc files.
-SplitObjs=YES
-
-ifeq "$(DLLized)" "YES"
-SplitObjs=NO
-endif
-ifeq "$(BootingFromHc)" "YES"
-SplitObjs=NO
-endif
-ifeq "$(GhcUnregisterised)" "YES"
-SplitObjs=NO
-endif
-
-# Strip local symbols from libraries? This can make the libraries smaller,
-# but makes debugging somewhat more difficult. Doesn't work with all ld's.
+# This variable is used ONLY for hi-boot files. Its only purpose is
+# to allow you to have a single directory with multiple .hi-boot files
+# for the same module, each corresponding to a different version of
+# GHC.
#
-StripLibraries=NO
-
-# ----------------------------------------------------------------------------
-# Options for GHC's RTS
+# HscIfaceFileVersion is propagated to hsc via
+# compiler/main/Config.hs, which is automatically generated by
+# compiler/Makefile.
-# This is a good way to set things like -optc-g and -optc-DDEBUG for the RTS.
-# GhcRtsHcOpts is used when compiling .hc files and .c files.
-# GhcRtsCcOpts is used when compiling .c files only.
+HscIfaceFileVersion=6
-# For a debugging RTS:
-# GhcRtsHcOpts = -optc-DDEBUG
-# GhcRtsCcOpts = -g
+#------------------------------------------------------------------------------
+# Options for Libraries
-# For an optimised RTS:
-GhcRtsHcOpts=-O2
-GhcRtsCcOpts=-O2 -fomit-frame-pointer
+# Which directory (in libraries/) contains the integer library?
+INTEGER_LIBRARY=integer-gmp
-# Include the front panel code? Needs GTK+.
-GhcRtsWithFrontPanel = NO
+# We build the libraries at least the "vanilla" way (way "v")
+GhcLibWays = v
-################################################################################
-#
-# hslibs project
-#
-################################################################################
+# In addition to the normal sequential way, the default is to also build
+# profiled prelude libraries unless we are booting from .hc files
+ifneq "$(BootingFromHc)" "YES"
+GhcLibWays += p
+endif
-# Build HsLibs for which compiler?
+ifeq "$(BuildSharedLibs)" "YES"
+GhcLibWays += dyn
+endif
-# If $(HsLibsFor) == hugs or ghc, we assume we're building for the
-# compiler/interpreter in the same source tree.
+# In addition, the RTS is built in some further variations. Ways that
+# make sense here:
+#
+# thr : threaded
+# thr_p : threaded profiled
+# debug : debugging (compile with -g for the C compiler, and -DDEBUG)
+# debug_p : debugging profiled
+# thr_debug : debugging threaded
+# thr_debug_p : debugging threaded profiled
+# t : ticky-ticky profiling
+# debug_t : debugging ticky-ticky profiling
+# l : event logging
+# thr_l : threaded and event logging
+# thr_debug_l : threaded and debugging and event logging
+#
+GhcRTSWays=l
+
+# Usually want the debug version
+ifeq "$(BootingFromHc)" "NO"
+GhcRTSWays += debug
+endif
-# HsLibsFor = ghc | hugs | nhc | hbc
-HsLibsFor = ghc
+ifeq "$(BuildSharedLibs)" "YES"
+GhcRTSWays += dyn debug_dyn thr_dyn thr_debug_dyn
+endif
-# hslibs for GHC also uses the following variables (defined above):
-# GhcLibWays, GhcLibHcOpts, GhcLibToolsHcOpts, DLLized, StripLibraries
+# Want the threaded versions unless we're unregisterised
+# Defer the check until later by using $(if..), because GhcUnregisterised might
+# be set in build.mk, which hasn't been read yet.
+GhcRTSWays += $(if $(findstring NO, $(GhcUnregisterised)),thr thr_debug thr_l,)
+GhcRTSWays += $(if $(findstring p, $(GhcLibWays)),$(if $(findstring NO, $(GhcUnregisterised)),thr_p,),)
-# Haskell compiler options for tools in hslibs
-GhcLibToolsHcOpts=-O
+# We can only build GHCi threaded if we have a threaded RTS:
+GhcThreaded = $(if $(findstring thr,$(GhcRTSWays)),YES,NO)
-# Build the Haskell Readline bindings?
+# Option flags to pass to GHC when it's compiling modules in
+# fptools/libraries. Typically these are things like -O or
+# -dcore-lint or -H32m. The ones that are *essential* are wired into
+# the build system.
#
-GhcLibsWithReadline=@HaveReadlineHeaders@
-
-# Libraries needed for linking with readline
-LibsReadline=@LibsReadline@
-
-# Include path to readline.h
-# (no path == in standard include path)
+# -O(2) is pretty desirable, otherwise no inlining of prelude
+# things (incl "+") happens when compiling with this compiler
#
-ReadlineIncludePath=
+# -XGenerics switches on generation of support code for
+# derivable type classes. This is now off by default,
+# but we switch it on for the libraries so that we generate
+# the code in case someone importing wants it
-# Math library
-LIBM=@LIBM@
+GhcLibHcOpts=-O2 -XGenerics
+
+# Win32 only: Enable the RTS and libraries to be built as DLLs
+DLLized=@EnableWin32DLLs@
-# Build the Haskell OpenGL/GLUT binding?
+# Strip local symbols from libraries? This can make the libraries smaller,
+# but makes debugging somewhat more difficult. Doesn't work with all ld's.
#
-GhcLibsWithHOpenGL=@GhcLibsWithHOpenGL@
+StripLibraries=NO
-X_CFLAGS=@X_CFLAGS@
-X_LIBS=@X_LIBS@
+# These are the URL patterns that Haddock uses to generate the "Source
+# File" links on each page.
+PackageSourceURL = http://darcs.haskell.org/packages/$(PACKAGE)/%{FILE}
-################################################################################
-#
-# happy project
+# ----------------------------------------------------------------------------
+# Object-file splitting
#
-# Happy specific options
+# Set SplitObjs=YES or NO in your build.mk
#
-################################################################################
+# Don't use -split-objs in in GhcLibHcOpts, because the build
+# system needs to do other special magic if you are
+# doing object-file splitting
-# The compiler you'd like to use to compile Happy
-WithHappyHc = @WithHc@
+ArchSupportsSplitObjs=$(strip $(if $(filter $(TargetArch_CPP),i386 x86_64 powerpc sparc),YES,NO))
-# HappyHcOpts gives the flags to pass to the Haskell compiler used
-# to compile the Happy sources with.
-#
-HappyHcOpts = -O
+# lazy test, so that $(GhcUnregisterised) can be set in build.mk
+SupportsSplitObjs=$(strip $(if $(filter YES,$(ArchSupportsSplitObjs)),\
+ $(if $(filter NO,$(BootingFromHc)),\
+ $(if $(filter NO,$(GhcUnregisterised)),\
+ YES,\
+ NO),\
+ NO),\
+ NO))
-################################################################################
-#
-# haggis project
-#
-# Haggis specific options
-#
-################################################################################
+# By default, enable SplitObjs for the libraries if this build supports it
+SplitObjs=$(SupportsSplitObjs)
-################################################################################
-#
-# green-card project
-#
-# Green-card specific options
-#
-################################################################################
+# Math library
+LIBM=@LIBM@
-################################################################################
-#
-# nofib project
+# .NET interop support?
#
-# nofib specific options
+DotnetSupport=NO
+
+# Build unix package?
#
-################################################################################
+GhcLibsWithUnix=@GhcLibsWithUnix@
-WithNofibHc = $(GHC_INPLACE)
+# ----------------------------------------------------------------------------
+# Options for GHC's RTS
-# NoFibSubDirs controls which set of tests should be run
-# You can run one or more of
-# imaginary
-# spectral
-# real
-# parallel
-# PRIVATE
-# PENDING
-# UNUSED
-NoFibSubDirs = imaginary spectral real
+# For an optimised RTS (you probably don't want to change these; we build
+# a debugging RTS by default now. Use -debug to get it).
+GhcRtsHcOpts=-optc-O2
+GhcRtsCcOpts=-fomit-frame-pointer
-# The different ways to build nofib. Default is just to mirror
-# what is done for the ghc prelude libraries.
-#
-NoFibWays = $(GhcLibWays)
+# Include the front panel code? Needs GTK+.
+GhcRtsWithFrontPanel = NO
-# Haskell compiler options for nofib
-NoFibHcOpts = -O
-
-# ==============================================================================
-#
-# END OF PROJECT-SPECIFIC STUFF
-#
-# Now come the generic configuration options
-#
-# ==============================================================================
+# Include support for CPU performance counters via the PAPI library in the RTS?
+# (PAPI: http://icl.cs.utk.edu/papi/)
+GhcRtsWithPapi = NO
+PapiLibDir=
+PapiIncludeDir=
################################################################################
#
DEFAULT_TMPDIR = /tmp
ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
-DEFAULT_TMPDIR = C:/TEMP
+DEFAULT_TMPDIR = /C/TEMP
endif
ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
-DEFAULT_TMPDIR = C:/TEMP
+DEFAULT_TMPDIR = /C/TEMP
endif
-# FPTOOLS_TOP: the top of the fptools hierarchy, absolute path.
+BIN_DIST_TOPDIR_ABS=$(TOP)
+BIN_DIST_DIR=$(BIN_DIST_TOPDIR_ABS)/$(BIN_DIST_NAME)
+
+BIN_DIST_NAME=ghc-$(ProjectVersion)
+BIN_DIST_TAR=$(TOP)/$(BIN_DIST_NAME)-$(TARGETPLATFORM).tar
+BIN_DIST_TAR_BZ2=$(BIN_DIST_TAR).bz2
+BIN_DIST_PREP_DIR=$(TOP)/bindist-prep
+BIN_DIST_PREP=$(BIN_DIST_PREP_DIR)/$(BIN_DIST_NAME)
+BIN_DIST_LIST=$(TOP)/bindist-list
+
+# Definition of installation directories, we don't use half of these, but since
+# the configure script has them on offer while passing through, we might as well
+# set them. Note that we have to be careful, because the GNU coding standards
+# have changed a bit over the course of time, and autoconf development reflects
+# this.
+#
+# A little bit of history regarding autoconf and GNU coding standards, use this
+# as a cheat-sheet for the stuff below:
+#
+# variable | default < 2.60 | default >= 2.60
+# ------------+--------------------+--------------------------------------
+# exec_prefix | ${prefix} | ${prefix}
+# libdir | ${exec_prefix}/lib | ${exec_prefix}/lib
+# datarootdir | NONE! | ${prefix}/share
+# datadir | ${prefix}/share | ${datarootdir}
+# infodir | ${prefix}/info | ${datarootdir}/info
+# mandir | ${prefix}/man | ${datarootdir}/man
+# docdir | NONE! | ${datarootdir}/doc/${PACKAGE_TARNAME}
+# htmldir | NONE! | ${docdir}
+# dvidir | NONE! | ${docdir}
+# pdfdir | NONE! | ${docdir}
+# psdir | NONE! | ${docdir}
+#
+# NOTE: The default e.g. ${docdir} above means that autoconf substitutes the
+# string "${docdir}", not the value of docdir! This is crucial for the GNU
+# coding standards.
+
+# This gets used in the default docdir when autoconf >= 2.60 is used
+PACKAGE_TARNAME := @PACKAGE_TARNAME@
+
+prefix := @prefix@
+
+# New autoconf (>= 2.60?) make a configure with a --datarootdir=DIR flag.
+# However, in order to support older autoconf's we don't use it.
+# datarootdir is set lower down instead.
+# But, as datadir is defined in terms of datarootdir, we also need to
+# set it to the value (if any) that configure gives it here.
+datarootdir := @datarootdir@
+
+exec_prefix := @exec_prefix@
+bindir := @bindir@
+datadir0 := @datadir@
+libdir0 := @libdir@
+includedir := @includedir@
+mandir := @mandir@
+dynlibdir := @libdir@
+
+ifeq "$(RelocatableBuild)" "YES"
+
+# Hack: our directory layouts tend to be different on Windows, so
+# hack around configure's bogus assumptions here.
+datarootdir := $(prefix)
+datadir := $(prefix)/lib
+libdir := $(prefix)/lib
+
+docdir := $(prefix)/doc
+htmldir := $(docdir)
+dvidir := $(docdir)
+pdfdir := $(docdir)
+psdir := $(docdir)
-ifeq "$(findstring $(TARGETPLATFORM), i386-unknown-cygwin32 i386-unknown-mingw32)" ""
-FPTOOLS_TOP_ABS = @hardtop@
else
-FPTOOLS_TOP_ABS = $(subst \,/,$(shell cygpath -w @hardtop@))
-endif
-# Keep the Unix-style path to use with Unix tools (e.g. in ghc-inplace script)
-FPTOOLS_TOP_ABS_UNIX = @hardtop@
-
-#
-# Installation directories, we don't use half of these,
-# but since the configure script has them on offer while
-# passing through, we might as well set them.
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-bindir = @bindir@
-datadir = @datadir@
-#sysconfdir = @datadir@
-#sharedstatedir = @sharedstatedir@
-#localstatedir = @localstatedir@
-libdir = @libdir@
-includedir = @includedir@
-oldincludedir = @oldincludedir@
-mandir = @mandir@
-
-#UNUSED, see below: libexecdir = @libexecdir@
-#UNUSED:infodir = @infodir@
-#UNUSED:srcdir = @srcdir@
-
-#
-# Default values for most of the above are only set if
-# they weren't configured to anything in particular
-# via the configure script. (i.e., we make no assumption
-# that the autoconf-generated script will assign defaults
-# to all of the above).
-#
-ifeq "$(strip $(exec_prefix))" ""
-exec_prefix = $(prefix)
-endif
-ifeq "$(strip $(bindir))" ""
-bindir = $(exec_prefix)/bin
-endif
+# Unix: override libdir and datadir to put ghc-specific stuff in
+# a subdirectory with the version number included.
+#
+# datadir is set to libdir here as GHC needs package.conf and unlit
+# to be in the same place (and things like ghc-pkg need to agree on
+# where package.conf is, so we just set it globally).
#
+datarootdir := $(datadir0)
+libdir := $(libdir0)/ghc-$(ProjectVersion)
+datadir := $(libdir)
+
+# New autoconf (>= 2.60?) make a configure with --docdir=DIR etc flags.
+# However, in order to support older autoconf's we don't use them.
+
+#docdir := @docdir@
+#htmldir := @htmldir@
+#dvidir := @dvidir@
+#pdfdir := @pdfdir@
+#psdir := @psdir@
+
+docdir := $(datarootdir)/doc/ghc
+htmldir := $(docdir)
+dvidir := $(docdir)
+pdfdir := $(docdir)
+psdir := $(docdir)
+
+endif # Windows
+
+headerdir := $(libdir)/include
+
+# Default place for putting interface files is $(libdir)
+# (overriden for packages in package.mk)
+ifacedir = $(libdir)
+
# NOTE: by intention, libexecdir and libdir point to
# the same place.
# => Only way to override this is to set libexecdir= on the command line.
# (NOTE: configure script setting is ignored).
libexecdir = $(libdir)
-ifeq "$(strip $(datadir))" ""
-datadir = $(prefix)/share
-endif
-ifeq "$(strip $(libdir))" ""
-libdir = $(exec_prefix)/lib
-endif
-ifeq "$(strip $(includedir))" ""
-includedir = $(prefix)/include
-endif
-ifeq "$(strip $(oldincludedir))" ""
-oldincludedir = /usr/include
-endif
-ifeq "$(strip $(mandir))" ""
-mandir = $(prefix)/man
-endif
+#-----------------------------------------------------------------------------
+# install configuration
+#
+# Set this to have files installed with a specific owner
+#
+INSTALL_OWNER =
+
+#
+# Set this to have files installed with a specific group
+#
+INSTALL_GROUP =
-################################################################################
#
-# Utilities programs: flags
+# Invocations of `install' for the four different classes
+# of targets:
#
-################################################################################
+INSTALL_PROGRAM = $(INSTALL) -m 755
+INSTALL_SCRIPT = $(INSTALL) -m 755
+INSTALL_SHLIB = $(INSTALL) -m 755
+INSTALL_DATA = $(INSTALL) -m 644
+INSTALL_HEADER = $(INSTALL) -m 644
+INSTALL_MAN = $(INSTALL) -m 644
+INSTALL_DIR = $(MKDIRHIER)
+
+#
+# runhaskell and hsc2hs are special, in that other compilers besides
+# GHC might provide them. Systems with a package manager often come
+# with tools to manage this kind of clash, e.g. RPM's
+# update-alternatives. When building a distribution for such a system,
+# we recommend setting both of the following to 'YES'.
+#
+# NO_INSTALL_RUNHASKELL = YES
+# NO_INSTALL_HSC2HS = YES
+#
+# NB. we use negative tests here because for binary-distributions we cannot
+# test build-time variables at install-time, so they must default to on.
+
+# -----------------------------------------------------------------------------
+# Utilities programs: flags
# If you want to give any standard flags to pretty much any utility
# (see utils.mk for a complete list), by adding a line here
#
# SRC_HC_OPTS += -O
+SRC_HC_OPTS += -H32m -O
+
# These flags make flex 8-bit
SRC_FLEX_OPTS += -8
-SRC_INSTALL_BIN_OPTS += -s
-
-# lint gets all CPP's flags too
-SRC_LINT_OPTS += -axz -DLINT $(SRC_CPP_OPTS)
-WAY$(_way)_LINT_OPTS += WAY$(_way)_CPP_OPTS
-
# Default fptools options for dllwrap.
-SRC_BLD_DLL_OPTS += -mno-cygwin --target=i386-mingw32
+SRC_BLD_DLL_OPTS += --target=i386-mingw32
# Flags for CPP when running GreenCard on .pgc files
GC_CPP_OPTS += -P -E -x c -traditional -D__GLASGOW_HASKELL__
################################################################################
#
-# Utilities programs: where to find them
+# Layout of the source tree
#
################################################################################
-#-----------------------------------------------------------------------------
-# FPtools Utility locations
-
-# By default, the various utils needed to be build ghc and chums
-# is set up to point to the utils/ directory. Define here the
-# path prefix for the utilities. Notice that it's a prefix with
-# a trailing slash, so that it can be concatenated directly on
-# front of a program name; if it's not set then we just look
-# along the shell's $(PATH)
-#
-# If instead you want to use installed or your own versions of these,
-# override the various *_PREFIX in build.mk, i.e., having the following
-# in build.mk:
-#
-# MKDEPENDC_PREFIX=
-#
-# will force `make' to rummage around in your PATH to find `mkdependC' (not
-# sure it would need it in the first place, but still).
-#
-GLAFP_UTILS = $(FPTOOLS_TOP)/glafp-utils
-
-SCRIPT_PREFIX = $(GLAFP_UTILS)/scripts/
-MKDEPENDC_PREFIX = $(GLAFP_UTILS)/mkdependC/
-LTX_PREFIX = $(GLAFP_UTILS)/ltx/
-RUNTEST_PREFIX = $(GLAFP_UTILS)/runstdtest/
-VERBATIM_PREFIX = $(GLAFP_UTILS)/verbatim/
-SGMLVERB_PREFIX = $(GLAFP_UTILS)/sgmlverb/
-ETAGS_PREFIX = $(GLAFP_UTILS)/etags/
-MSUB_PREFIX = $(GLAFP_UTILS)/msub/
-LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/
-MKDIRHIER_PREFIX = $(GLAFP_UTILS)/mkdirhier/
-DOCBOOK_PREFIX = $(GLAFP_UTILS)/docbook/
-
-LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/
+# Here we provide defines for the various directories in the source tree,
+# so we can move things around more easily. A define $(GHC_FOO_DIR)
+# indicates a directory relative to the top of the source tree.
+
+GHC_UTILS_DIR = utils
+GHC_INCLUDE_DIR = includes
+GHC_COMPILER_DIR = compiler
+GHC_PROG_DIR = ghc
+GHC_RTS_DIR = rts
+GHC_DRIVER_DIR = driver
+GHC_COMPAT_DIR = compat
+
+GHC_MKDEPENDC_DIR = $(GHC_UTILS_DIR)/mkdependC
+GHC_LTX_DIR = $(GHC_UTILS_DIR)/ltx
+GHC_LNDIR_DIR = $(GHC_UTILS_DIR)/lndir
+GHC_MKDIRHIER_DIR = $(GHC_UTILS_DIR)/mkdirhier
+GHC_DOCBOOK_DIR = $(GHC_UTILS_DIR)/docbook
+GHC_UNLIT_DIR = $(GHC_UTILS_DIR)/unlit
+GHC_HP2PS_DIR = $(GHC_UTILS_DIR)/hp2ps
+GHC_HSTAGS_DIR = $(GHC_UTILS_DIR)/hasktags
+GHC_GHCTAGS_DIR = $(GHC_UTILS_DIR)/ghctags
+GHC_HSC2HS_DIR = $(GHC_UTILS_DIR)/hsc2hs
+GHC_TOUCHY_DIR = $(GHC_UTILS_DIR)/touchy
+GHC_PKG_DIR = $(GHC_UTILS_DIR)/ghc-pkg
+GHC_GENPRIMOP_DIR = $(GHC_UTILS_DIR)/genprimopcode
+GHC_GENAPPLY_DIR = $(GHC_UTILS_DIR)/genapply
+GHC_CABAL_DIR = $(GHC_UTILS_DIR)/ghc-cabal
+GHC_MANGLER_DIR = $(GHC_DRIVER_DIR)/mangler
+GHC_SPLIT_DIR = $(GHC_DRIVER_DIR)/split
+GHC_SYSMAN_DIR = $(GHC_RTS_DIR)/parallel
+
+# -----------------------------------------------------------------------------
+# Names of programs in the GHC tree
+#
+# xxx_PGM the name of an executable, without the path
+# xxx the executable relative to the current dir
+
+GHC_UNLIT_PGM = unlit$(exeext)
+GHC_HP2PS_PGM = hp2ps$(exeext)
+GHC_HSTAGS_PGM = hasktags$(exeext)
+GHC_GHCTAGS_PGM = ghctags$(exeext)
+GHC_HSC2HS_PGM = hsc2hs$(exeext)
+GHC_TOUCHY_PGM = touchy$(exeext)
+GHC_MANGLER_PGM = ghc-asm
+GHC_SPLIT_PGM = ghc-split
+GHC_SYSMAN_PGM = SysMan
+GHC_GENPRIMOP_PGM = genprimopcode$(exeext)
+GHC_GENAPPLY_PGM = genapply$(exeext)
+GHC_CABAL_PGM = ghc-cabal$(exeext)
+GHC_PKG_PGM = ghc-pkg$(exeext)
+GHC_MKDEPENDC_PGM = mkdependC
+GHC_LTX_PGM = ltx$(exeext)
+GHC_MKDIRHIER_PGM = mkdirhier
+GHC_LNDIR_PGM = lndir
+GHC_DUMMY_GHC_PGM = dummy-ghc$(exeext)
-HAPPY_PREFIX = $(FPTOOLS_TOP)/happy/src/
-GREENCARD_PREFIX = $(FPTOOLS_TOP)/green-card/src/
+ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+GHC_CP = "xcopy /y"
+GHC_PERL = perl
+else
+GHC_CP = $(CP)
+GHC_PERL = $(PERL)
+endif
-UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/
-HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/
-HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hstags/
-HSC2HS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hsc2hs/
+HP2PS = $(GHC_HP2PS_DIR)/$(GHC_HP2PS_PGM)
+HSTAGS = $(GHC_HSTAGS_DIR)/$(GHC_HSTAGS_PGM)
+MANGLER = $(INPLACE_LIB)/$(GHC_MANGLER_PGM)
+SPLIT = $(INPLACE_LIB)/$(GHC_SPLIT_PGM)
+SYSMAN = $(GHC_SYSMAN_DIR)/$(GHC_SYSMAN_PGM)
+LTX = $(GHC_LTX_DIR)/$(GHC_LTX_PGM)
+LNDIR = $(GHC_LNDIR_DIR)/$(GHC_LNDIR_PGM)
+
+INPLACE = inplace
+INPLACE_BIN = $(INPLACE)/bin
+INPLACE_LIB = $(INPLACE)/lib
+INPLACE_MINGW = $(INPLACE)/mingw
+
+UNLIT = $(INPLACE_LIB)/$(GHC_UNLIT_PGM)
+TOUCHY = $(INPLACE_LIB)/$(GHC_TOUCHY_PGM)
+MKDIRHIER = $(INPLACE_BIN)/$(GHC_MKDIRHIER_PGM)
+MKDEPENDC = $(INPLACE_BIN)/$(GHC_MKDEPENDC_PGM)
+GHC_CABAL_INPLACE = $(INPLACE_BIN)/$(GHC_CABAL_PGM)
+GENAPPLY_INPLACE = $(INPLACE_BIN)/$(GHC_GENAPPLY_PGM)
+GHC_PKG_INPLACE = $(INPLACE_BIN)/$(GHC_PKG_PGM)
+GHCTAGS_INPLACE = $(INPLACE_BIN)/$(GHC_GHCTAGS_PGM)
+HSC2HS_INPLACE = $(INPLACE_BIN)/$(GHC_HSC2HS_PGM)
+GENPRIMOP_INPLACE = $(INPLACE_BIN)/$(GHC_GENPRIMOP_PGM)
+DUMMY_GHC_INPLACE = $(INPLACE_BIN)/$(GHC_DUMMY_GHC_PGM)
+
+GENERATED_FILE = chmod a-w
+EXECUTABLE_FILE = chmod +x
#-----------------------------------------------------------------------------
# Haskell compilers and mkdependHS
# NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead
# (because the version numbers have to be calculated).
-GHC = @WithGhc@
-GhcVersion = @GhcVersion@
-GhcMajVersion = @GhcMajVersion@
-GhcMinVersion = @GhcMinVersion@
-GhcPatchLevel = @GhcPatchLevel@
+GHC := @WithGhc@
+# If we have a make dependency on c:/ghc/ghc, and the file is actually
+# called c:/ghc/ghc.exe, then make will think that ghc doesn't exist
+# and that it doesn't know how to create it.
+ifneq "$(wildcard $(GHC).exe)" ""
+GHC := $(GHC).exe
+endif
+
+GhcDir = $(dir $(GHC))
+
+# Set to YES if $(GHC) has the editline package installed
+GhcHasEditline = @GhcHasEditline@
HBC = @HBC@
NHC = @NHC@
-HC = @WithHc@
-MKDEPENDHS = $(GHC)
-
# Sometimes we want to invoke ghc from the build tree in different
-# projects (eg. it's handy to have a nofib & a ghc build in the same
+# places (eg. it's handy to have a nofib & a ghc build in the same
# tree). We can refer to "this ghc" as $(GHC_INPLACE):
-GHC_INPLACE = $(FPTOOLS_TOP)/ghc/compiler/ghc-inplace
+GHC_INPLACE = $(GHC_STAGE1)
+
+GHC_STAGE0_ABS = $(GHC)
+GHC_STAGE1_ABS = $(TOP)/$(INPLACE_BIN)/ghc-stage1$(exeext)
+GHC_STAGE2_ABS = $(TOP)/$(INPLACE_BIN)/ghc-stage2$(exeext)
+GHC_STAGE3_ABS = $(TOP)/$(INPLACE_BIN)/ghc-stage3$(exeext)
+
+GHC_STAGE0 = $(GHC)
+GHC_STAGE1 = $(INPLACE_BIN)/ghc-stage1$(exeext)
+GHC_STAGE2 = $(INPLACE_BIN)/ghc-stage2$(exeext)
+GHC_STAGE3 = $(INPLACE_BIN)/ghc-stage3$(exeext)
+
+# Install stage 2 by default, can be changed to 3
+INSTALL_GHC_STAGE=2
+
+BOOTSTRAPPING_CONF = libraries/bootstrapping.conf
+
+INPLACE_PACKAGE_CONF = $(INPLACE_LIB)/package.conf
+
+GhcVersion = @GhcVersion@
+GhcPatchLevel = @GhcPatchLevel@
+GhcMajVersion = @GhcMajVersion@
+GhcMinVersion = @GhcMinVersion@
+
+ghc_ge_607 = @ghc_ge_607@
+ghc_ge_609 = @ghc_ge_609@
+
+# Canonicalised ghc version number, used for easy (integer) version
+# comparisons. We must expand $(GhcMinVersion) to two digits by
+# adding a leading zero if necessary:
+ifneq "$(findstring $(GhcMinVersion), 0 1 2 3 4 5 6 7 8 9)" ""
+GhcCanonVersion = $(GhcMajVersion)0$(GhcMinVersion)
+else
+GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion)
+endif
#-----------------------------------------------------------------------------
# C compiler
#
-#
+# NB. Don't override $(WhatGccIsCalled) using build.mk, re-configure using
+# the flag --with-gcc=<blah> instead. The reason is that the configure script
+# needs to know which gcc you're using in order to perform its tests.
+
HaveGcc = @HaveGcc@
UseGcc = YES
WhatGccIsCalled = @WhatGccIsCalled@
+GccVersion = @GccVersion@
ifeq "$(strip $(HaveGcc))" "YES"
ifneq "$(strip $(UseGcc))" "YES"
CC = cc
endif
# default C compiler flags
-SRC_CC_OPTS = -O
-ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
-SRC_CC_OPTS += -mno-cygwin -mwin32
+SRC_CC_OPTS = @SRC_CC_OPTS@
+
+ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux"
+SRC_CC_OPTS += -G0
endif
+SRC_HSC2HS_OPTS += $(addprefix --cflag=,$(filter-out -O,$(SRC_CC_OPTS)))
+SRC_HSC2HS_OPTS += $(foreach d,$(GMP_INCLUDE_DIRS),-I$(d))
+
#-----------------------------------------------------------------------------
# GMP Library (version 2.0.x or above)
#
HaveLibGmp = @HaveLibGmp@
LibGmp = @LibGmp@
+GMP_INCLUDE_DIRS=@GMP_INCLUDE_DIRS@
+GMP_LIB_DIRS=@GMP_LIB_DIRS@
+
#-----------------------------------------------------------------------------
-# Regex library
-# (if present in libc use that one, otherwise use the one in the tree)
+# GMP framework (Mac OS X)
#
-HaveRegex = @HaveRegex@
+HaveFrameworkGMP = @HaveFrameworkGMP@
#-----------------------------------------------------------------------------
-# GTK+
-
-GTK_CONFIG = @GTK_CONFIG@
-GTK_VERSION = @GTK_VERSION@
+# Mingwex Library
+#
+HaveLibMingwEx = @HaveLibMingwEx@
#-----------------------------------------------------------------------------
-# Flex
+# Flex (currently unused, could be moved to glafp-utils)
-FLEX = @LEX@
+# FLEX = @LEX@
# Don't bother with -lfl, we define our own yywrap()s anyway.
-FLEX_LIB =
+# FLEX_LIB =
#WAS:FLEX_LIB = @LEXLIB@
#-----------------------------------------------------------------------------
# Other standard (ha!) Unix utilities
AR = @ArCmd@
+ArSupportsInput = @ArSupportsInput@
# Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
BASH = /usr/local/bin/bash
-#
-# Could be either gzip or compress
-#
-COMPRESS = @CompressCmd@
-COMPRESS_SUFFIX = @CompressSuffix@
CONTEXT_DIFF = @ContextDiffCmd@
CP = cp
-CPP = @CPP@
+CPP = @CPP@ @CPPFLAGS@
CTAGS = $(ETAGS)
-RAWCPP = $(CPP) -undef -traditional
+#
+# RAWCPP_FLAGS are the flags to give to cpp (viz, gcc -E) to persuade it to
+# behave plausibly on Haskell sources.
+#
+RAWCPP_FLAGS = -undef -traditional
FIND = @FindCmd@
+SORT = @SortCmd@
INSTALL = @INSTALL@
#
# Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
# install-sh script (if chosen). This not terribly useful to us, so we convert
# it into an abs. path.
#
-INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
+INSTALL := $(subst .././install-sh,$(TOP)/install-sh,$(INSTALL))
LATEX = latex
HEVEA = hevea
HACHA = hacha
MV = mv
NROFF = nroff
PERL = @PerlCmd@
+PYTHON = @PythonCmd@
PIC = pic
PREPROCESSCMD = $(CC) -E
-PRINTER = lpr
RANLIB = @RANLIB@
RM = rm -f
SED = @SedCmd@
SHELL = /bin/sh
+
+LD = @LdCmd@
+
+# Some ld's support the -x flag and some don't, so the configure
+# script detects which we have and sets LdXFlag to "-x" or ""
+# respectively.
+LD_X = @LdXFlag@
+
+# GNU ld supports input via a linker script, which is useful to avoid
+# overflowing command-line length limits.
+LdIsGNULd = @LdIsGNULd@
+
#
# In emergency situations, REAL_SHELL is used to perform shell commands
# from within the ghc driver script, by scribbling the command line to
# The reason for having to do this is that overly long command lines
# cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
# 2.5.1), which is why this backdoor is provided. The situation of overly
-# long command lines is either encountered while doing `make boot' in ghc/compiler,
+# long command lines is either encountered while doing `make boot' in compiler/,
# or when linking the compiler binary (`hsc').
#
# We do not use SHELL to execute long commands, as `make' will more than likely
REAL_SHELL=$(SHELL)
SIZE = size
STRIP = strip
+PATCH = @PatchCmd@
TAR = @TarCmd@
ZIP = zip
-#
-# Under Windows, we have to deal with .exe suffixes
-#
-EXE_SUFFIX=@exeext@
+HSCOLOUR = @HSCOLOUR@
#
# This is special to literate/, ToDo: add literate-specific
TIME = @TimeCmd@
TROFF = troff
UNAME = uname
-YACC = @YaccCmd@
-#-----------------------------------------------------------------------------
-# SGML stuff
+# GTK+
+GTK_CONFIG = @GTK_CONFIG@
-JADE = @JadeCmd@
+# Set this if you want to use Inno Setup to build a Windows installer
+# when you make a bindist
+ISCC =
-SGML2DVI = $(DOCBOOK_PREFIX)db2dvi
-SGML2HTML = $(DOCBOOK_PREFIX)db2html
-SGML2PS = $(DOCBOOK_PREFIX)db2ps
-SGML2PDF = $(DOCBOOK_PREFIX)db2pdf
-SGML2RTF = $(DOCBOOK_PREFIX)db2rtf
+#-----------------------------------------------------------------------------
+# DocBook XML stuff
-SGMLSTYLESHEET = $(FPTOOLS_TOP_ABS)/docs/fptools-both.dsl
+BUILD_DOCBOOK_HTML = @BUILD_DOCBOOK_HTML@
+BUILD_DOCBOOK_PS = @BUILD_DOCBOOK_PS@
+BUILD_DOCBOOK_PDF = @BUILD_DOCBOOK_PDF@
+DBLATEX = @DblatexCmd@
+XSLTPROC = @XsltprocCmd@
+XMLLINT = @XmllintCmd@
-SRC_SGML2DVI_OPTS = -d $(SGMLSTYLESHEET)
-SRC_SGML2HTML_OPTS = -d $(SGMLSTYLESHEET)
-SRC_SGML2PS_OPTS = -d $(SGMLSTYLESHEET)
-SRC_SGML2RTF_OPTS = -d $(SGMLSTYLESHEET)
-SRC_SGML2PDF_OPTS = -d $(SGMLSTYLESHEET)
+DIR_DOCBOOK_XSL = @DIR_DOCBOOK_XSL@
-DOCBOOK_CATALOG = @Catalog@
+XSLTPROC_LABEL_OPTS = --stringparam toc.section.depth 3 \
+ --stringparam section.autolabel 1 \
+ --stringparam section.label.includes.component.label 1
#-----------------------------------------------------------------------------
# FPtools support software
-# Stuff from fptools/glafp-utils
-MKDEPENDC = $(MKDEPENDC_PREFIX)mkdependC
-LTX = $(LTX_PREFIX)ltx
-MKDIRHIER = $(MKDIRHIER_PREFIX)mkdirhier
-LNDIR = $(LNDIR_PREFIX)lndir
-MSUB = $(MSUB_PREFIX)msub
-ETAGS = $(ETAGS_PREFIX)etags
-VERBATIM = $(VERBATIM_PREFIX)verbatim
-SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb
-RUNTEST = $(RUNTEST_PREFIX)runstdtest
-LX = @LxCmd@
-GREENCARD = $(FPTOOLS_TOP)/green-card/src/green-card
-
BLD_DLL = dllwrap
#
+# ghc-pkg
+#
+GHC_PKG = @GhcPkgCmd@
+
+#
+# GreenCard
+#
+GREENCARD = @GreenCardCmd@
+GREENCARD_VERSION = @GreenCardVersion@
+
+#
# Happy
#
HAPPY = @HappyCmd@
#
# Options to pass to Happy when we're going to compile the output with GHC
#
-GHC_HAPPY_OPTS = $(shell if ( test `echo $(HAPPY_VERSION) | sed -e "s/\(.*\)\..*/\1/g"` "-gt" "1" || test `echo $(HAPPY_VERSION) | sed -e "s/.*\.\(.*\)/\1/g"` "-ge" "9" ); then echo -agc; else echo -g; fi)
+SRC_HAPPY_OPTS = -agc --strict
+
+# Temp. to work around performance problems in the HEAD around 8/12/2003,
+# A Happy compiled with this compiler needs more stack.
+SRC_HAPPY_OPTS += +RTS -K2m -RTS
#
-# Stuff from fptools/literate
+# Alex
#
-LIT2PGM = $(LITERATE_PREFIX)lit2pgm
-LIT2HTML = $(LITERATE_PREFIX)lit2html
-LIT2LATEX = $(LITERATE_PREFIX)lit2latex
-MKDEPENDLIT = $(LITERATE_PREFIX)mkdependlit
-LIT2CHANGELOG = $(LITERATE_PREFIX)lit2changelog
-LIT2TEXT = $(LITERATE_PREFIX)lit2text
-
+ALEX = @AlexCmd@
+ALEX_VERSION = @AlexVersion@
#
-# Stuff from fptools/ghc/utils
+# Options to pass to Happy when we're going to compile the output with GHC
#
-UNLIT = $(UNLIT_PREFIX)unlit$(EXE_SUFFIX)
-HP2PS = $(HP2PS_PREFIX)hp2ps$(EXE_SUFFIX)
-HSTAGS = $(HSTAGS_PREFIX)hstags
-HSC2HS = $(HSC2HS_PREFIX)hsc2hs-inplace
+SRC_ALEX_OPTS = -g
+
+# Should we build haddock docs?
+HADDOCK_DOCS = YES
+# And HsColour the sources?
+ifeq "$(HSCOLOUR)" ""
+HSCOLOUR_SRCS = NO
+else
+HSCOLOUR_SRCS = YES
+endif
#
-# Options for the compiling different `ways'. Various projects within
-# the glorious fptools tree support building in various user-configured
-# ways. For instance, you could set up one `way' such that the prelude
-# libraries all were built with the option -ffoldr-build-on.
+# Options for compiling in different `ways'.
#
# To configure up your own way, have a look at some of the standard ways
# such as profiling, and create your own set of WAY_*_OPTS defs below.
#
#
-# IMPORTANT! The WAYS variable configures the different `ways'
-# you want to build a project (or maybe just parts of it, as is
-# the case for ghc/). This variable is intended set inside the
-# project mk setup, enforcing a global fptools WAYS is a bit too
-# much (do you *really* want to build glafp-utils the profiled-concurrent
-# way?)
-#
-
-#
# Definitions of the different ways:
#
# * their name:
#
# The ways currently defined.
#
-ALL_WAYS=p t u s mp mg a b c d e f g h i j k l m n o A B
-USER_WAYS=a b c d e f g h i j k l m n o A B
+ALL_WAYS=v p t l s mp mg debug dyn thr thr_l debug_dyn thr_dyn thr_debug_dyn thr_p thr_debug thr_debug_l
+USER_WAYS=a b c d e f g h j k l m n o A B
#
-# The following ways currently have treated specially, p u t mg,
+# The following ways currently have treated specially, p t mg,
# as the driver script treats these guys specially and needs to carefully be told
# about the options for these. Hence, we hide the required command line options
-# for these in the ghc/driver, as this is the only place they are needed.
+# for these in the driver, as this is the only place they are needed.
#
# If you want to add to these default options, fill in the variables below:
+# Way 'v':
+WAY_v_NAME=vanilla
+WAY_v_HC_OPTS=
+
# Way 'p':
WAY_p_NAME=profiling
WAY_p_HC_OPTS= -prof
WAY_t_NAME=ticky-ticky profiling
WAY_t_HC_OPTS= -ticky
-# Way `u':
-WAY_u_NAME=unregisterized (using portable C only)
-WAY_u_HC_OPTS=-unreg
-
-# Way `s':
-WAY_s_NAME=threads (for SMP)
-WAY_s_HC_OPTS=-smp
+# Way 'l':
+WAY_l_NAME=event logging
+WAY_l_HC_OPTS= -eventlog
# Way `mp':
WAY_mp_NAME=parallel
WAY_mg_HC_OPTS=-gransim
#
+# These ways apply to the RTS only:
+#
+
+# Way 'thr':
+WAY_thr_NAME=threaded
+WAY_thr_HC_OPTS=-optc-DTHREADED_RTS
+
+# Way 'thr_p':
+WAY_thr_p_NAME=threaded profiled
+WAY_thr_p_HC_OPTS=-optc-DTHREADED_RTS -prof
+
+# Way 'thr_l':
+WAY_thr_l_NAME=threaded event logging
+WAY_thr_l_HC_OPTS=-optc-DTHREADED_RTS -eventlog
+
+# Way 'debug':
+WAY_debug_NAME=debug
+WAY_debug_HC_OPTS=-optc-DDEBUG
+
+# Way 'debug_p':
+WAY_debug_p_NAME=debug profiled
+WAY_debug_p_HC_OPTS=-optc-DDEBUG -prof
+
+# Way 'debug_t':
+WAY_debug_t_NAME=debug ticky-ticky profiling
+WAY_debug_t_HC_OPTS= -ticky -optc-DDEBUG
+
+# Way 'thr_debug':
+WAY_thr_debug_NAME=threaded
+WAY_thr_debug_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG
+
+# Way 'thr_debug_p':
+WAY_thr_debug_p_NAME=threaded debug profiling
+WAY_thr_debug_p_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -prof
+
+# Way 'thr_debug_l':
+WAY_thr_debug_l_NAME=threaded debug event logging
+WAY_thr_debug_l_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -eventlog
+
+# Way 'dyn': build dynamic shared libraries
+WAY_dyn_NAME=dyn
+WAY_dyn_HC_OPTS=-fPIC -dynamic
+WAY_dyn_LIB_TARGET=libHSrts-gcc661.so
+
+# Way 'thr_dyn':
+WAY_thr_dyn_NAME=thr_dyn
+WAY_thr_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS
+
+# Way 'thr_debug_dyn':
+WAY_thr_debug_dyn_NAME=thr_dyn
+WAY_thr_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS -optc-DDEBUG
+
+# Way 'debug_dyn':
+WAY_debug_dyn_NAME=thr_dyn
+WAY_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DDEBUG
+
+#
# Add user-way configurations here:
#
WAY_A_NAME=
WAY_h_NAME=
WAY_h_HC_OPTS=
-WAY_i_NAME=
-WAY_i_HC_OPTS=
-
WAY_j_NAME=
WAY_j_HC_OPTS=
WAY_o_NAME=
WAY_o_HC_OPTS=
+
+################################################################################
+#
+# 31-bit-Int Core files
+#
+################################################################################
+
+#
+# It is possible to configure the compiler and prelude to support 31-bit
+# integers, suitable for a back-end and RTS using a tag bit on a 32-bit
+# architecture. Currently the only useful output from this option is external Core
+# files. The following additions to your build.mk will produce the
+# 31-bit core output. Note that this is *not* just a library "way"; the
+# compiler must be built a special way too.
+
+# GhcCppOpts +=-DWORD_SIZE_IN_BITS=31
+# GhcLibHcOpts +=-fext-core -fno-code -DWORD_SIZE_IN_BITS=31
+# GhcLibCppOpts += -DWORD_SIZE_IN_BITS=31
+# SplitObjs=NO
+
+################################################################################
+#
+# Library configure arguments
+#
+################################################################################
+
+CONFIGURE_ARGS = @CONFIGURE_ARGS@
+
+################################################################################
+#
+# Bindist testing directory
+#
+################################################################################
+
+ifeq "$(Windows)" "YES"
+BIN_DIST_INST_SUBDIR = "install dir"
+else
+# I very much doubt that paths with spaces will work on Unix
+BIN_DIST_INST_SUBDIR = installed
+endif
+
+BIN_DIST_INST_DIR = $(TOP)/bindisttest/$(BIN_DIST_INST_SUBDIR)
+