GhcStage2HcOpts=-O2
GhcStage3HcOpts=-O2
-GhcProfiled=NO
GhcDebugged=NO
-GhcLibProfiled=$(if $(filter p,$(GhcLibWays)),YES,NO)
+GhcDynamic=NO
-# Do we support shared libs?
-PlatformSupportsSharedLibs = $(if $(filter $(TARGETPLATFORM),i386-unknown-linux x86_64-unknown-linux),YES,NO)
+# GhcProfiled=YES means compile a profiled stage-2 compiler
+GhcProfiled=NO
-# ToDo later:
-# BuildStaticLibs=@BuildStaticLibs@
+# Do we support shared libs?
+PlatformSupportsSharedLibs = $(if $(filter $(TARGETPLATFORM),\
+ i386-unknown-linux x86_64-unknown-linux \
+ i386-unknown-freebsd x86_64-unknown-freebsd \
+ i386-unknown-openbsd x86_64-unknown-openbsd \
+ i386-unknown-mingw32 \
+ i386-unknown-solaris2 \
+ i386-apple-darwin powerpc-apple-darwin),YES,NO)
# Build a compiler that will build *unregisterised* libraries and
# binaries by default. Unregisterised code is supposed to compile and
$(if $(filter YESYESNO,\
$(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)),YES,NO))
+# Build a compiler with the llvm code generator backend
+GhcWithLlvmCodeGen=NO
+
HaveLibDL = @HaveLibDL@
# ArchSupportsSMP should be set iff there is support for that arch in
# Whether to include GHCi in the compiler. Depends on whether the RTS linker
# has support for this OS/ARCH combination.
-OsSupportsGHCi=$(strip $(patsubst $(HostOS_CPP), YES, $(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin)))
+OsSupportsGHCi=$(strip $(patsubst $(HostOS_CPP), YES, $(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd dragonfly netbsd openbsd darwin)))
ArchSupportsGHCi=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc sparc64)))
ifeq "$(OsSupportsGHCi)$(ArchSupportsGHCi)" "YESYES"
# Whether to use libffi for adjustors (foreign import "wrapper") or
# not. If we have built-in support (rts/Adjustor.c) then we use that,
# otherwise we fall back on libffi, which is slightly slower.
-ArchHasAdjustorSupport=$(strip $(if $(findstring $(HostArch_CPP),i386 x86_64 alpha powerpc ia64,),YES,NO))
+ArchHasAdjustorSupport = $(if $(findstring $(HostArch_CPP),i386 x86_64),YES,NO)
ifeq "$(ArchHasAdjustorSupport)" "YES"
UseLibFFIForAdjustors=NO
else
# debug_p : debugging profiled
# thr_debug : debugging threaded
# thr_debug_p : debugging threaded profiled
-# t : ticky-ticky profiling
-# debug_t : debugging ticky-ticky profiling
# l : event logging
# thr_l : threaded and event logging
#
GhcLibHcOpts=-O2 -XGenerics
-# Win32 only: Enable the RTS and libraries to be built as DLLs
-DLLized=@EnableWin32DLLs@
-
# Strip local symbols from libraries? This can make the libraries smaller,
# but makes debugging somewhat more difficult. Doesn't work with all ld's.
#
# doing object-file splitting
ArchSupportsSplitObjs=$(strip $(if $(filter $(TargetArch_CPP),i386 x86_64 powerpc sparc),YES,NO))
+# Object splitting is disabled on darwin due to #4013
+OsSupportsSplitObjs=$(strip $(if $(filter $(TargetOS_CPP),mingw32 cygwin32 linux solaris2 freebsd dragonfly netbsd openbsd),YES,NO))
# lazy test, so that $(GhcUnregisterised) can be set in build.mk
-SupportsSplitObjs=$(strip $(if $(filter YES,$(ArchSupportsSplitObjs)),\
- $(if $(filter NO,$(BootingFromHc)),\
- $(if $(filter NO,$(GhcUnregisterised)),\
- YES,\
- NO),\
- NO),\
- NO))
+SupportsSplitObjs=$(strip \
+ $(if $(and $(filter YES,$(ArchSupportsSplitObjs)),\
+ $(filter YES,$(OsSupportsSplitObjs)),\
+ $(filter NO,$(BootingFromHc)),\
+ $(filter NO,$(GhcUnregisterised))),\
+ YES,NO))
# By default, enable SplitObjs for the libraries if this build supports it
SplitObjs=$(SupportsSplitObjs)
-# Math library
-LIBM=@LIBM@
+# ----------------------------------------------------------------------------
+# Package-related things
-# .NET interop support?
-#
-DotnetSupport=NO
+# Extra packages to add to the build, in dependency order
+EXTRA_PACKAGES =
-# Build unix package?
-#
-GhcLibsWithUnix=@GhcLibsWithUnix@
+# Whether to install $(EXTRA_PACKAGES)
+InstallExtraPackages = NO
+# Run "ghc-pkg check" on each package
CHECK_PACKAGES = NO
# ----------------------------------------------------------------------------
DEFAULT_TMPDIR = /C/TEMP
endif
-BIN_DIST_TOPDIR_ABS=$(TOP)
-BIN_DIST_DIR=$(BIN_DIST_TOPDIR_ABS)/$(BIN_DIST_NAME)
-
-BIN_DIST_NAME=ghc-$(ProjectVersion)
-BIN_DIST_TAR=$(TOP)/$(BIN_DIST_NAME)-$(TARGETPLATFORM).tar
-BIN_DIST_TAR_BZ2=$(BIN_DIST_TAR).bz2
-BIN_DIST_PREP_DIR=$(TOP)/bindist-prep
-BIN_DIST_PREP=$(BIN_DIST_PREP_DIR)/$(BIN_DIST_NAME)
-BIN_DIST_LIST=$(TOP)/bindist-list
+BIN_DIST_NAME = ghc-$(ProjectVersion)
+BIN_DIST_PREP_DIR = bindistprep/$(BIN_DIST_NAME)
+BIN_DIST_PREP_TAR = bindistprep/$(BIN_DIST_NAME)-$(TARGETPLATFORM).tar
+BIN_DIST_PREP_TAR_BZ2 = $(BIN_DIST_PREP_TAR).bz2
+BIN_DIST_TAR_BZ2 = $(BIN_DIST_NAME)-$(TARGETPLATFORM).tar.bz2
+BIN_DIST_LIST = bindist-list
WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-i386-windows
WINDOWS_INSTALLER = $(WINDOWS_INSTALLER_BASE)$(exeext)
#
# SRC_HC_OPTS += -O
+
+# SRC_HC_OPTS includes flags to be added to *every* Haskell
+# compilation. Setting SRC_HC_OPTS is a good way to set the default
+# optimisation level (-O) and heap size (-H<size>).
+#
+# SRC_HC_OPTS is *not* for adding flags that are required to make your
+# build work. Examples:
+#
+# - instead of using -pgmc/-pgma-/-pgml, use the --with-gcc option to configure
+#
+# - if you need -optc, -opta, or -optl flags, the CONF_CC_* and CONF_LD_*
+# variables are more appropriate (set via configure)
+#
+# Note that SRC_HC_OPTS are added to every Haskell compilation,
+# including when using the bootstrapping compiler (stage 0), So don't
+# put options here that are only supported by very recent GHCs.
+#
SRC_HC_OPTS += -H32m -O
# These flags make flex 8-bit
GHC_GENAPPLY_PGM = genapply$(exeext)
GHC_CABAL_PGM = ghc-cabal$(exeext)
GHC_PKG_PGM = ghc-pkg$(exeext)
-GHC_MKDEPENDC_PGM = mkdependC
GHC_LTX_PGM = ltx$(exeext)
GHC_MKDIRHIER_PGM = mkdirhier
GHC_LNDIR_PGM = lndir
UNLIT = $(INPLACE_LIB)/$(GHC_UNLIT_PGM)
TOUCHY = $(INPLACE_LIB)/$(GHC_TOUCHY_PGM)
MKDIRHIER = $(INPLACE_BIN)/$(GHC_MKDIRHIER_PGM)
-MKDEPENDC = $(INPLACE_BIN)/$(GHC_MKDEPENDC_PGM)
GHC_CABAL_INPLACE = $(INPLACE_BIN)/$(GHC_CABAL_PGM)
GENAPPLY_INPLACE = $(INPLACE_BIN)/$(GHC_GENAPPLY_PGM)
GHC_PKG_INPLACE = $(INPLACE_BIN)/$(GHC_PKG_PGM)
EXECUTABLE_FILE = chmod +x
#-----------------------------------------------------------------------------
-# Haskell compilers and mkdependHS
+# Installed GHC
-# $(GHC), $(HBC) and $(NHC) point to installed versions of the relevant
-# compilers, if available.
-#
-# $(HC) is a generic Haskell 98 compiler, set to $(GHC) by default.
-# $(MKDEPENDHS) is the Haskell dependency generator (ghc -M).
+# $(GHC) points to installed version of the compiler.
#
# NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead
# (because the version numbers have to be calculated).
GHC := $(GHC).exe
endif
-GhcDir = $(dir $(GHC))
-
-# Set to YES if $(GHC) has the editline package installed
-GhcHasEditline = @GhcHasEditline@
-
-HBC = @HBC@
-NHC = @NHC@
-
# Sometimes we want to invoke ghc from the build tree in different
# places (eg. it's handy to have a nofib & a ghc build in the same
# tree). We can refer to "this ghc" as $(GHC_INPLACE):
GhcMajVersion = @GhcMajVersion@
GhcMinVersion = @GhcMinVersion@
-ghc_ge_609 = @ghc_ge_609@
-ghc_ge_6102 = @ghc_ge_6102@
-ghc_ge_611 = @ghc_ge_611@
+# Keep this in sync with the variables in package-config.mk
+ghc_ge_613 = @ghc_ge_613@
# Canonicalised ghc version number, used for easy (integer) version
# comparisons. We must expand $(GhcMinVersion) to two digits by
endif
# C compiler and linker flags from configure (e.g. -m<blah> to select
-# correct C compiler backend).
-CONF_CC_OPTS = @CONF_CC_OPTS@
-CONF_LD_OPTS = @CONF_LD_OPTS@
+# correct C compiler backend). The stage number is the stage of GHC
+# that is being used to compile with.
+CONF_CC_OPTS_STAGE0 = @CONF_CC_OPTS_STAGE0@
+CONF_CC_OPTS_STAGE1 = @CONF_CC_OPTS_STAGE1@
+CONF_CC_OPTS_STAGE2 = @CONF_CC_OPTS_STAGE2@
+CONF_LD_OPTS_STAGE0 = @CONF_LD_OPTS_STAGE0@
+CONF_LD_OPTS_STAGE1 = @CONF_LD_OPTS_STAGE1@
+CONF_LD_OPTS_STAGE2 = @CONF_LD_OPTS_STAGE2@
+CONF_CPP_OPTS_STAGE0 = @CONF_CPP_OPTS_STAGE0@
+CONF_CPP_OPTS_STAGE1 = @CONF_CPP_OPTS_STAGE1@
+CONF_CPP_OPTS_STAGE2 = @CONF_CPP_OPTS_STAGE2@
ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux"
CONF_CC_OPTS += -G0
endif
-SRC_HSC2HS_OPTS += $(addprefix --cflag=,$(filter-out -O,$(SRC_CC_OPTS)))
+SRC_HSC2HS_OPTS += $(addprefix --cflag=,$(filter-out -O,$(SRC_CC_OPTS) $(CONF_CC_OPTS_STAGE0)))
SRC_HSC2HS_OPTS += $(foreach d,$(GMP_INCLUDE_DIRS),-I$(d))
#-----------------------------------------------------------------------------
# Mingwex Library
#
HaveLibMingwEx = @HaveLibMingwEx@
+DLLTOOL = inplace/mingw/bin/dlltool.exe
#-----------------------------------------------------------------------------
# Flex (currently unused, could be moved to glafp-utils)
# Other standard (ha!) Unix utilities
AR = @ArCmd@
+AR_OPTS = @ArArgs@
ArSupportsInput = @ArSupportsInput@
+ArSupportsAtFile = @ArSupportsAtFile@
# Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
BASH = /usr/local/bin/bash
CONTEXT_DIFF = @ContextDiffCmd@
CP = cp
+# It's not easy to separate the CPP program from its flags, as
+# AC_PROG_CPP defines CPP as "/usr/bin/gcc -E"
CPP = @CPP@ @CPPFLAGS@
CTAGS = $(ETAGS)
#
#
INSTALL := $(subst .././install-sh,$(TOP)/install-sh,$(INSTALL))
LATEX = latex
-HEVEA = hevea
-HACHA = hacha
+PDFLATEX = pdflatex
+BIBTEX = bibtex
LN_S = @LN_S@
-MANMACROS = -man
-MSMACROS = -ms
MV = mv
NROFF = nroff
PERL = @PerlCmd@
PREPROCESSCMD = $(CC) -E
RANLIB = @RANLIB@
SED = @SedCmd@
+TR = tr
SHELL = /bin/sh
-LD = @LdCmd@
+HaveDtrace = @HaveDtrace@
+DTRACE = @DtraceCmd@
+
+LD = @LdCmd@
+NM = @NmCmd@
# Some ld's support the -x flag and some don't, so the configure
# script detects which we have and sets LdXFlag to "-x" or ""
# On MSYS, building with SplitObjs=YES fails with
# ar: Bad file number
# see #3201. We need to specify a smaller max command-line size
-# to work around it. 32767 doesn't work; 30000 does.
-ifeq "$(Windows)" "YES"
-XARGS = xargs -s 30000
-else
+# to work around it. 32767 doesn't work; 30000 does, but says
+# xargs: value for -s option should be < 28153
+# so we now use 20000 to be comfortably below this bound
XARGS = xargs
+ifeq "$(Windows)" "YES"
+XARGS_OPTS = -s 20000
endif
#
# with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
# command shell.
#
-REAL_SHELL=$(SHELL)
-SIZE = size
-STRIP = strip
-PATCH = @PatchCmd@
-TAR = @TarCmd@
-ZIP = zip
+REAL_SHELL = $(SHELL)
-HSCOLOUR = @HSCOLOUR@
+STRIP_CMD = strip
+PATCH_CMD = @PatchCmd@
+TAR_CMD = @TarCmd@
+BZIP2_CMD = bzip2
+GZIP_CMD = gzip
-#
-# This is special to literate/, ToDo: add literate-specific
-# configure setup to literate/.
-#
-TBL = tbl
-TEX = tex
-TGRIND = tgrind
-TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
-TIB = tib
+HSCOLOUR_CMD = @HSCOLOUR@
-TIME = @TimeCmd@
-TROFF = troff
-UNAME = uname
+TIME_CMD = @TimeCmd@
# GTK+
-GTK_CONFIG = @GTK_CONFIG@
+GTK_CONFIG_CMD = @GTK_CONFIG@
# Set this if you want to use Inno Setup to build a Windows installer
# when you make a bindist
-ISCC =
+ISCC_CMD =
#-----------------------------------------------------------------------------
# DocBook XML stuff
GHC_PKG = @GhcPkgCmd@
#
-# GreenCard
-#
-GREENCARD = @GreenCardCmd@
-GREENCARD_VERSION = @GreenCardVersion@
-
-#
# Happy
#
HAPPY = @HappyCmd@
# Should we build haddock docs?
HADDOCK_DOCS = YES
# And HsColour the sources?
-ifeq "$(HSCOLOUR)" ""
+ifeq "$(HSCOLOUR_CMD)" ""
HSCOLOUR_SRCS = NO
else
HSCOLOUR_SRCS = YES
endif
-#
-# Options for compiling in different `ways'.
-#
-# To configure up your own way, have a look at some of the standard ways
-# such as profiling, and create your own set of WAY_*_OPTS defs below.
-# After having done that, add your way string to WAYS, and after having
-# run the configure script, the different projects will add the new way
-# to the list of ways they support.
-#
-
-#
-# Definitions of the different ways:
-#
-# * their name:
-# - tag, e.g., p
-# - description, e.g., profiling
-# * what they mean to the driver:
-# - WAY_p_HC_OPTS gives the list of command-line options
-# to the driver.
-#
-
-#
-# The ways currently defined.
-#
-ALL_WAYS=v p t l s mp mg debug dyn thr thr_l debug_dyn thr_dyn thr_debug_dyn thr_p thr_debug debug_p thr_debug_p
-
-#
-# The following ways currently have treated specially, p t mg,
-# as the driver script treats these guys specially and needs to carefully be told
-# about the options for these. Hence, we hide the required command line options
-# for these in the driver, as this is the only place they are needed.
-#
-# If you want to add to these default options, fill in the variables below:
-
-# Way 'v':
-WAY_v_NAME=vanilla
-WAY_v_HC_OPTS=
-
-# Way 'p':
-WAY_p_NAME=profiling
-WAY_p_HC_OPTS= -prof
-
-# Way 't':
-WAY_t_NAME=ticky-ticky profiling
-WAY_t_HC_OPTS= -ticky
-
-# Way 'l':
-WAY_l_NAME=event logging
-WAY_l_HC_OPTS= -eventlog
-
-# Way `mp':
-WAY_mp_NAME=parallel
-WAY_mp_HC_OPTS=-parallel
-
-# Way `mg':
-WAY_mg_NAME=GranSim
-WAY_mg_HC_OPTS=-gransim
-
-#
-# These ways apply to the RTS only:
-#
-
-# Way 'thr':
-WAY_thr_NAME=threaded
-WAY_thr_HC_OPTS=-optc-DTHREADED_RTS
-
-# Way 'thr_p':
-WAY_thr_p_NAME=threaded profiled
-WAY_thr_p_HC_OPTS=-optc-DTHREADED_RTS -prof
-
-# Way 'thr_l':
-WAY_thr_l_NAME=threaded event logging
-WAY_thr_l_HC_OPTS=-optc-DTHREADED_RTS -eventlog
-
-# Way 'debug':
-WAY_debug_NAME=debug
-WAY_debug_HC_OPTS=-optc-DDEBUG
-
-# Way 'debug_p':
-WAY_debug_p_NAME=debug profiled
-WAY_debug_p_HC_OPTS=-optc-DDEBUG -prof
-
-# Way 'debug_t':
-WAY_debug_t_NAME=debug ticky-ticky profiling
-WAY_debug_t_HC_OPTS= -ticky -optc-DDEBUG
-
-# Way 'thr_debug':
-WAY_thr_debug_NAME=threaded
-WAY_thr_debug_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG
-
-# Way 'thr_debug_p':
-WAY_thr_debug_p_NAME=threaded debug profiling
-WAY_thr_debug_p_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -prof
-
-# Way 'dyn': build dynamic shared libraries
-WAY_dyn_NAME=dyn
-WAY_dyn_HC_OPTS=-fPIC -dynamic
-
-# Way 'thr_dyn':
-WAY_thr_dyn_NAME=thr_dyn
-WAY_thr_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS
-
-# Way 'thr_debug_dyn':
-WAY_thr_debug_dyn_NAME=thr_dyn
-WAY_thr_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS -optc-DDEBUG
-
-# Way 'debug_dyn':
-WAY_debug_dyn_NAME=thr_dyn
-WAY_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DDEBUG
-
################################################################################
#
# 31-bit-Int Core files
ICONV_INCLUDE_DIRS = @ICONV_INCLUDE_DIRS@
ICONV_LIB_DIRS = @ICONV_LIB_DIRS@
-################################################################################
-#
-# Bindist testing directory
-#
-################################################################################
-
-ifeq "$(Windows)" "YES"
-BIN_DIST_INST_SUBDIR = "install dir"
-else
-# I very much doubt that paths with spaces will work on Unix
-BIN_DIST_INST_SUBDIR = installed
-endif
-
-BIN_DIST_INST_DIR = $(TOP)/bindisttest/$(BIN_DIST_INST_SUBDIR)
-
+GMP_INCLUDE_DIRS = @GMP_INCLUDE_DIRS@
+GMP_LIB_DIRS = @GMP_LIB_DIRS@