GhcStage2HcOpts=-O2
GhcStage3HcOpts=-O2
-GhcProfiled=NO
GhcDebugged=NO
-GhcLibProfiled=$(if $(filter p,$(GhcLibWays)),YES,NO)
+GhcDynamic=NO
-# Do we support shared libs?
-PlatformSupportsSharedLibs = $(if $(filter $(TARGETPLATFORM),i386-unknown-linux x86_64-unknown-linux),YES,NO)
+# GhcProfiled=YES means compile a profiled stage-2 compiler
+GhcProfiled=NO
-# ToDo later:
-# BuildStaticLibs=@BuildStaticLibs@
+# Do we support shared libs?
+PlatformSupportsSharedLibs = $(if $(filter $(TARGETPLATFORM),\
+ i386-unknown-linux x86_64-unknown-linux \
+ i386-unknown-freebsd x86_64-unknown-freebsd \
+ i386-unknown-openbsd x86_64-unknown-openbsd \
+ i386-unknown-mingw32 \
+ i386-unknown-solaris2 \
+ i386-apple-darwin powerpc-apple-darwin),YES,NO)
# Build a compiler that will build *unregisterised* libraries and
# binaries by default. Unregisterised code is supposed to compile and
$(if $(filter YESYESNO,\
$(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)),YES,NO))
+# Build a compiler with the llvm code generator backend
+GhcWithLlvmCodeGen=NO
+
HaveLibDL = @HaveLibDL@
# ArchSupportsSMP should be set iff there is support for that arch in
# Whether to use libffi for adjustors (foreign import "wrapper") or
# not. If we have built-in support (rts/Adjustor.c) then we use that,
# otherwise we fall back on libffi, which is slightly slower.
-ArchHasAdjustorSupport=$(strip $(if $(findstring $(HostArch_CPP),i386 x86_64 alpha powerpc ia64,),YES,NO))
+ArchHasAdjustorSupport = $(if $(findstring $(HostArch_CPP),i386 x86_64),YES,NO)
ifeq "$(ArchHasAdjustorSupport)" "YES"
UseLibFFIForAdjustors=NO
else
# doing object-file splitting
ArchSupportsSplitObjs=$(strip $(if $(filter $(TargetArch_CPP),i386 x86_64 powerpc sparc),YES,NO))
+# Object splitting is disabled on darwin due to #4013
+OsSupportsSplitObjs=$(strip $(if $(filter $(TargetOS_CPP),mingw32 cygwin32 linux solaris2 freebsd dragonfly netbsd openbsd),YES,NO))
# lazy test, so that $(GhcUnregisterised) can be set in build.mk
-SupportsSplitObjs=$(strip $(if $(filter YES,$(ArchSupportsSplitObjs)),\
- $(if $(filter NO,$(BootingFromHc)),\
- $(if $(filter NO,$(GhcUnregisterised)),\
- YES,\
- NO),\
- NO),\
- NO))
+SupportsSplitObjs=$(strip \
+ $(if $(and $(filter YES,$(ArchSupportsSplitObjs)),\
+ $(filter YES,$(OsSupportsSplitObjs)),\
+ $(filter NO,$(BootingFromHc)),\
+ $(filter NO,$(GhcUnregisterised))),\
+ YES,NO))
# By default, enable SplitObjs for the libraries if this build supports it
SplitObjs=$(SupportsSplitObjs)
-# .NET interop support?
-#
-DotnetSupport=NO
+# ----------------------------------------------------------------------------
+# Package-related things
-# Build unix package?
-#
-GhcLibsWithUnix=@GhcLibsWithUnix@
+# Extra packages to add to the build, in dependency order
+EXTRA_PACKAGES =
+# Whether to install $(EXTRA_PACKAGES)
+InstallExtraPackages = NO
+
+# Run "ghc-pkg check" on each package
CHECK_PACKAGES = NO
# ----------------------------------------------------------------------------
#
# SRC_HC_OPTS += -O
+
+# SRC_HC_OPTS includes flags to be added to *every* Haskell
+# compilation. Setting SRC_HC_OPTS is a good way to set the default
+# optimisation level (-O) and heap size (-H<size>).
+#
+# SRC_HC_OPTS is *not* for adding flags that are required to make your
+# build work. Examples:
+#
+# - instead of using -pgmc/-pgma-/-pgml, use the --with-gcc option to configure
+#
+# - if you need -optc, -opta, or -optl flags, the CONF_CC_* and CONF_LD_*
+# variables are more appropriate (set via configure)
+#
+# Note that SRC_HC_OPTS are added to every Haskell compilation,
+# including when using the bootstrapping compiler (stage 0), So don't
+# put options here that are only supported by very recent GHCs.
+#
SRC_HC_OPTS += -H32m -O
# These flags make flex 8-bit
EXECUTABLE_FILE = chmod +x
#-----------------------------------------------------------------------------
-# Haskell compilers and mkdependHS
+# Installed GHC
-# $(GHC), $(HBC) and $(NHC) point to installed versions of the relevant
-# compilers, if available.
-#
-# $(HC) is a generic Haskell 98 compiler, set to $(GHC) by default.
-# $(MKDEPENDHS) is the Haskell dependency generator (ghc -M).
+# $(GHC) points to installed version of the compiler.
#
# NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead
# (because the version numbers have to be calculated).
GHC := $(GHC).exe
endif
-GhcDir = $(dir $(GHC))
-
-# Set to YES if $(GHC) has the editline package installed
-GhcHasEditline = @GhcHasEditline@
-
-HBC = @HBC@
-NHC = @NHC@
-
# Sometimes we want to invoke ghc from the build tree in different
# places (eg. it's handy to have a nofib & a ghc build in the same
# tree). We can refer to "this ghc" as $(GHC_INPLACE):
GhcMajVersion = @GhcMajVersion@
GhcMinVersion = @GhcMinVersion@
-ghc_ge_609 = @ghc_ge_609@
-ghc_ge_6102 = @ghc_ge_6102@
-ghc_ge_611 = @ghc_ge_611@
+# Keep this in sync with the variables in package-config.mk
+ghc_ge_613 = @ghc_ge_613@
# Canonicalised ghc version number, used for easy (integer) version
# comparisons. We must expand $(GhcMinVersion) to two digits by
endif
# C compiler and linker flags from configure (e.g. -m<blah> to select
-# correct C compiler backend).
-CONF_CC_OPTS = @CONF_CC_OPTS@
-CONF_LD_OPTS = @CONF_LD_OPTS@
+# correct C compiler backend). The stage number is the stage of GHC
+# that is being used to compile with.
+CONF_CC_OPTS_STAGE0 = @CONF_CC_OPTS_STAGE0@
+CONF_CC_OPTS_STAGE1 = @CONF_CC_OPTS_STAGE1@
+CONF_CC_OPTS_STAGE2 = @CONF_CC_OPTS_STAGE2@
+CONF_LD_OPTS_STAGE0 = @CONF_LD_OPTS_STAGE0@
+CONF_LD_OPTS_STAGE1 = @CONF_LD_OPTS_STAGE1@
+CONF_LD_OPTS_STAGE2 = @CONF_LD_OPTS_STAGE2@
+CONF_CPP_OPTS_STAGE0 = @CONF_CPP_OPTS_STAGE0@
+CONF_CPP_OPTS_STAGE1 = @CONF_CPP_OPTS_STAGE1@
+CONF_CPP_OPTS_STAGE2 = @CONF_CPP_OPTS_STAGE2@
ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux"
CONF_CC_OPTS += -G0
endif
-SRC_HSC2HS_OPTS += $(addprefix --cflag=,$(filter-out -O,$(SRC_CC_OPTS) $(CONF_CC_OPTS)))
+SRC_HSC2HS_OPTS += $(addprefix --cflag=,$(filter-out -O,$(SRC_CC_OPTS) $(CONF_CC_OPTS_STAGE0)))
SRC_HSC2HS_OPTS += $(foreach d,$(GMP_INCLUDE_DIRS),-I$(d))
#-----------------------------------------------------------------------------
AR = @ArCmd@
AR_OPTS = @ArArgs@
ArSupportsInput = @ArSupportsInput@
+ArSupportsAtFile = @ArSupportsAtFile@
# Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
BASH = /usr/local/bin/bash
#
INSTALL := $(subst .././install-sh,$(TOP)/install-sh,$(INSTALL))
LATEX = latex
-HEVEA = hevea
-HACHA = hacha
+PDFLATEX = pdflatex
+BIBTEX = bibtex
LN_S = @LN_S@
-MANMACROS = -man
-MSMACROS = -ms
MV = mv
NROFF = nroff
PERL = @PerlCmd@
PREPROCESSCMD = $(CC) -E
RANLIB = @RANLIB@
SED = @SedCmd@
+TR = tr
SHELL = /bin/sh
HaveDtrace = @HaveDtrace@
# On MSYS, building with SplitObjs=YES fails with
# ar: Bad file number
# see #3201. We need to specify a smaller max command-line size
-# to work around it. 32767 doesn't work; 30000 does.
+# to work around it. 32767 doesn't work; 30000 does, but says
+# xargs: value for -s option should be < 28153
+# so we now use 20000 to be comfortably below this bound
XARGS = xargs
ifeq "$(Windows)" "YES"
-XARGS_OPTS = -s 30000
+XARGS_OPTS = -s 20000
endif
#
# with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
# command shell.
#
-REAL_SHELL=$(SHELL)
-SIZE = size
-STRIP = strip
-PATCH = @PatchCmd@
-TAR = @TarCmd@
-ZIP = zip
+REAL_SHELL = $(SHELL)
-HSCOLOUR = @HSCOLOUR@
+STRIP_CMD = strip
+PATCH_CMD = @PatchCmd@
+TAR_CMD = @TarCmd@
+BZIP2_CMD = bzip2
+GZIP_CMD = gzip
-#
-# This is special to literate/, ToDo: add literate-specific
-# configure setup to literate/.
-#
-TBL = tbl
-TEX = tex
-TGRIND = tgrind
-TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
-TIB = tib
+HSCOLOUR_CMD = @HSCOLOUR@
-TIME = @TimeCmd@
-TROFF = troff
-UNAME = uname
+TIME_CMD = @TimeCmd@
# GTK+
-GTK_CONFIG = @GTK_CONFIG@
+GTK_CONFIG_CMD = @GTK_CONFIG@
# Set this if you want to use Inno Setup to build a Windows installer
# when you make a bindist
-ISCC =
+ISCC_CMD =
#-----------------------------------------------------------------------------
# DocBook XML stuff
GHC_PKG = @GhcPkgCmd@
#
-# GreenCard
-#
-GREENCARD = @GreenCardCmd@
-GREENCARD_VERSION = @GreenCardVersion@
-
-#
# Happy
#
HAPPY = @HappyCmd@
HSTAGS = @HstagsCmd@
# Should we build haddock docs?
-HADDOCK_DOCS = $(GhcWithInterpreter)
+HADDOCK_DOCS = YES
# And HsColour the sources?
-ifeq "$(HSCOLOUR)" ""
+ifeq "$(HSCOLOUR_CMD)" ""
HSCOLOUR_SRCS = NO
else
HSCOLOUR_SRCS = YES
ICONV_INCLUDE_DIRS = @ICONV_INCLUDE_DIRS@
ICONV_LIB_DIRS = @ICONV_LIB_DIRS@
-################################################################################
-#
-# Bindist testing directory
-#
-################################################################################
-
-BIN_DIST_INST_SUBDIR = "install dir"
-BIN_DIST_INST_DIR = $(TOP)/bindisttest/$(BIN_DIST_INST_SUBDIR)
-
+GMP_INCLUDE_DIRS = @GMP_INCLUDE_DIRS@
+GMP_LIB_DIRS = @GMP_LIB_DIRS@