# included by boilerplate.mk (see boilerplate.mk for a list).
+#################################################################################
+#
+# Project-wide platform variables
+#
+#################################################################################
+
+# A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
+# specifier. E.g. sparc-sun-solaris2
+
+HOSTPLATFORM = @HostPlatform@
+TARGETPLATFORM = @TargetPlatform@
+BUILDPLATFORM = @HostPlatform@
+
+# Hack alert:
+# in one or two places, we need to get at the OS version (major and perhaps even minor),
+# HostOS_Full is the OS name reported by AC_CANONICAL_SYSTEM.
+#
+HostPlatform_CPP = @HostPlatform_CPP@
+HostArch_CPP = @HostArch_CPP@
+HostOS_CPP = @HostOS_CPP@
+HostOS_Full = @HostOS_Full@
+HostVendor_CPP = @HostVendor_CPP@
+
+#
+# ToDo: check if these can be purged now. -- sof
+#
+
+@HostPlatform_CPP@_HOST = 1
+@HostPlatform_CPP@_TARGET = 1
+@HostPlatform_CPP@_BUILD = 1
+
+@HostArch_CPP@_HOST_ARCH = 1
+@HostArch_CPP@_TARGET_ARCH = 1
+@HostArch_CPP@_BUILD_ARCH = 1
+
+@HostOS_CPP@_HOST_OS = 1
+@HostOS_CPP@_TARGET_OS = 1
+@HostOS_CPP@_BUILD_OS = 1
+
+@HostVendor_CPP@_HOST_VENDOR = 1
+@HostVendor_CPP@_TARGET_VENDOR = 1
+@HostVendor_CPP@_BUILD_VENDOR = 1
+
+# Leading underscores on symbol names in object files
+# Valid options: YES/NO
+#
+LeadingUnderscore=@LeadingUnderscore@
+
+# Pin a suffix on executables? If so, what. (cygwin32 only).
+exeext=@exeext@
#################################################################################
#
# projects use others you must list them in the correct order.
#
# Generally: * glafp-utils should be first
-# * literate next
# * happy next
-# * ghc&hslibs next
+# * ghc next
# then it's up to you
-ProjectsToBuild = glafp-utils literate ghc hslibs
+ProjectsToBuild = glafp-utils ghc
+#
+# Make a distinction between building and installing
+#
+ProjectsToInstall = glafp-utils ghc
#
# Should the various project tests directories be built?
#
IncludeTestDirsInBuild=NO
+#
+# Name variables for the main project
+#
+Project = Ghc
+ProjectName = $($(Project)ProjectName)
+ProjectNameShort = $($(Project)ProjectNameShort)
+ProjectVersion = $($(Project)ProjectVersion)
+ProjectVersionInt = $($(Project)ProjectVersionInt)
+ProjectPatchLevel = $($(Project)ProjectPatchLevel)
+
#################################################################################
#
# GHC project
#
# Name variables for ghc:
#
-GhcProjectName =The Glorious Glasgow Haskell Compilation System
-GhcProjectNameShort =ghc
-GhcProjectVersion =2.02
-GhcProjectPatchLevel =0
-GhcBuildeeVersion =202
-GhcBuilderVersion =29
-
-#
-# Name variables for the fptools, for now equal to the above
-# ghc stuff
-#
-ProjectName =$(GhcProjectName)
-ProjectNameShort =$(GhcProjectNameShort)
-ProjectVersion =$(GhcProjectVersion)
-ProjectPatchLevel =$(GhcProjectPatchLevel)
-
+GhcProjectName = The Glorious Glasgow Haskell Compilation System
+GhcProjectNameShort = ghc
+GhcProjectVersion = 3.01
+GhcProjectVersionInt = 301 # treated as an *integer* (for cpp defines)
+GhcProjectPatchLevel = 0
#---------------------------------------------------------------
#
# Variables that control how the compiler itself is built
# Specify the Haskell compiler to be used to compile the compiler itself
-# WithGhcHc Path name of the compiler to use
-# Ghc2_0 Whether this compiler is GHC 2.0 or later
-# (which affects gruesome details about
-# how mutually recursive modules are handled)
-# WithGhcHcType What "type" of compiler is being used
-# Valid options:
+#
+# WithGhcHc Path name of the compiler to use
+#
+# WithGhcHcType What "type" of compiler is being used
+# Valid options:
# HC_CHALMERS_HBC
# HC_GLASGOW_GHC
# HC_ROJEMO_NHC
# HC_UNSPECIFIED
-WithGhcHc = ghc-0.29
-Ghc2_0=NO
+
+WithGhcHc = ghc-2.10
+
# Unused, we think
# WithGhcHcType=HC_GLASGOW_GHC
# Extra option flags to pass to the compiler that compiles the compiler
# (Ones that are essential are wired into ghc/compiler/Makefile)
# Typical ones:
-# -O compiler an optimised compiler
+# -H25m allocate a bigger heap (default is 6m)
+#
+# -O compile an optimised compiler
+# NB! If you add -O you'll almost certainly need to increase
+# the amount of heap space too (to 15m or more)
+#
# -DDEBUG include consistency/assertion checks in the compiled compiler
-# -fshow-import-specs show import specialisations
+#
+# -dcore-lint check the types after every pass of the compiler;
+# a pretty strong internal check
GhcHcOpts=
# GhcWithHscBuiltViaC - build GHC compiler proper (\`hsc') from .hc files?
#
# Target platforms supported:
# i386, alpha & sparc
-GhcWithNativeCodeGen=YES
-
-# Build the compiler with the deforester included?
-GhcWithDeforester=NO
+GhcWithNativeCodeGen=$(shell if (test x$(findstring $(HostArch_CPP),i386 alpha sparc) = x); then echo NO; else echo YES; fi)
+#
+# Building various ways?
+# (right now, empty if not).
+BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
+BuildingConcurrent=$(subst mc,YES,$(filter mc,$(WAYS)))
+BuildingProfiling=$(subst p,YES,$(filter p,$(WAYS)))
+BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
+BuildingProfilingConcurrent=$(subst mr,YES,$(filter mr,$(WAYS)))
#---------------------------------------------------------------
#
-# Variables that control how the prelude libararies and runtime system are built
+# Variables that control how the prelude libraries and runtime system are built
# What extra ways to build the libraries in
# In addition to the normal sequential way, the default is to also build
# Option flags to pass to GHC when it's compiling prelude modules
# Typically these are things like -O or -dcore-lint
# The ones that are *essential* are wired into ghc/lib/Makefile
-GhcLibHcOpts= -split-objs -odir $(basename $*)
-
+#
+# -O is pretty desirable, otherwise no inlining of prelude
+# things (incl "+") happens when compiling with this compiler
-#################################################################################
#
-# hslibs project
+# Splitting profiled code produces awfully large archives under ELF, so
+# we turn it off here.
#
-# Set of (configurable) options needed by the Haskell libraries (hslibs)
-# plus their default options (if any).
+# ToDo: track down the source of this.
#
-#################################################################################
+ifeq "$(strip $(way))" "p"
+GhcLibHcOpts= -O
+else
+ifeq "$(strip $(way))" "mr"
+GhcLibHcOpts= -O
+else
+GhcLibHcOpts= -O -split-objs -odir $*
+endif
+endif
# Build the Haskell Readline bindings?
#
-HsLibsWithReadline=NO
+GhcLibsWithReadline=NO
#
# Include path to readline.h
# (no path == in standard include path)
#
ReadlineIncludePath=
-# Build the socket libraries?
+# Build the socket libraries? (ToDo: is this used?)
#
-HsLibsWithSockets=YES
+GhcLibsWithSockets=YES
-#
-# The different ways to build hslibs. Default is just to mirror
-# what is done for the ghc prelude libraries.
-#
-HsLibWays=$(GhcLibWays)
+# what to include in a binary distribution
-# Option flags for hslibs are by default the same as for the options
-# used for the prelude libs (see above).
-HsLibHcOpts=$(GhcLibHcOpts)
+GhcMainDir = ghc
+GhcBinDistDirs = ghc
+GhcBinDistDocs = docs ghc/docs/users_guide ghc/docs/libraries
+GhcBinDistPrlScripts = ghc-$(GhcProjectVersion) stat2resid hstags mkdependHS
+GhcBinDistLibPrlScripts = hscpp
+GhcBinDistBins = hp2ps
#################################################################################
#
#
#################################################################################
+#
+# Name variables for happy:
+#
+HappyProjectName = Happy
+HappyProjectNameShort = happy
+HappyProjectVersion = 1.5
+HappyProjectVersionInt = 15
+HappyProjectPatchLevel = 0
+
+# The compiler you'd like to use to compile Happy
+WithHappyHc = $(WithGhcHc)
+
+# HappyHcOpts gives the flags to pass to the Haskell compiler used
+# to compile the Happy sources with.
+#
+HappyHcOpts =
+
+# what to include in a binary distribution
+HappyMainDir = happy
+HappyBinDistDirs = happy
+HappyBinDistDocs = happy/doc
+HappyBinDistShScripts = happy
#################################################################################
#
#
#################################################################################
-
-
#################################################################################
#
# green-card project
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
+#UNUSED, see below: libexecdir = @libexecdir@
datadir = @datadir@
-sysconfdir = @datadir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
+#sysconfdir = @datadir@
+#sharedstatedir = @sharedstatedir@
+#localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
includedir = @includedir@
oldincludedir = @oldincludedir@
mandir = @mandir@
-srcdir = @srcdir@
+#UNUSED:srcdir = @srcdir@
+
+#
+# Default values for most of the above are only set if
+# they weren't configured to anything in particular
+# via the configure script. (i.e., we make no assumption
+# that the autoconf-generated script will assign defaults
+# to all of the above).
+#
+ifeq "$(strip $(exec_prefix))" ""
+exec_prefix = $(prefix)
+endif
+ifeq "$(strip $(bindir))" ""
+bindir = $(exec_prefix)/bin
+endif
+
+#
+# NOTE: by intention, libexecdir and libdir point to
+# the same place.
+# => Only way to override this is to set libexecdir= on the command line.
+# (NOTE: configure script setting is ignored).
+libexecdir = $(libdir)
+
+ifeq "$(strip $(datadir))" ""
+datadir = $(prefix)/share
+endif
+ifeq "$(strip $(libdir))" ""
+libdir = $(exec_prefix)/lib
+endif
+ifeq "$(strip $(infodir))" ""
+infodir = $(prefix)/info
+endif
+ifeq "$(strip $(includedir))" ""
+includedir = $(prefix)/include
+endif
+ifeq "$(strip $(oldincludedir))" ""
+oldincludedir = /usr/include
+endif
+ifeq "$(strip $(mandir))" ""
+mandir = $(prefix)/man
+endif
+
#################################################################################
#
#################################################################################
#
-# Platform
-#
-#################################################################################
-
-# A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
-# specifier. E.g. sparc-sun-solaris2
-
-HOSTPLATFORM = @HostPlatform@
-TARGETPLATFORM = @TargetPlatform@
-BUILDPLATFORM = @HostPlatform@
-
-HostPlatform_CPP = @HostPlatform_CPP@
-HostArch_CPP = @HostArch_CPP@
-HostOS_CPP = @HostOS_CPP@
-HostVendor_CPP = @HostVendor_CPP@
-
-#
-# ToDo: check if these can be purged now. -- sof
-#
-
-@HostPlatform_CPP@_HOST = 1
-@HostPlatform_CPP@_TARGET = 1
-@HostPlatform_CPP@_BUILD = 1
-
-@HostArch_CPP@_HOST_ARCH = 1
-@HostArch_CPP@_TARGET_ARCH = 1
-@HostArch_CPP@_BUILD_ARCH = 1
-
-@HostOS_CPP@_HOST_OS = 1
-@HostOS_CPP@_TARGET_OS = 1
-@HostOS_CPP@_BUILD_OS = 1
-
-@HostVendor_CPP@_HOST_VENDOR = 1
-@HostVendor_CPP@_TARGET_VENDOR = 1
-@HostVendor_CPP@_BUILD_VENDOR = 1
-
-# Leading underscores on symbol names in object files
-# Valid options: YES/NO
-#
-LeadingUnderscore=@LeadingUnderscore@
-
-#################################################################################
-#
# Utilities programs: where to find them
#
#################################################################################
# override the various *_PREFIX in build.mk, i.e., having the following
# in build.mk:
#
-# FASTMAKE_PREFIX=
+# MKDEPENDC_PREFIX=
#
-# will force `make' to rummage around in your PATH to find `fastmake' (not
+# will force `make' to rummage around in your PATH to find `mkdependC' (not
# sure it would need it in the first place, but still).
#
GLAFP_UTILS = $(FPTOOLS_TOP)/glafp-utils
SCRIPT_PREFIX = $(GLAFP_UTILS)/scripts/
-FASTMAKE_PREFIX = $(GLAFP_UTILS)/fastmake/
MKDEPENDC_PREFIX = $(GLAFP_UTILS)/mkdependC/
LTX_PREFIX = $(GLAFP_UTILS)/ltx/
RUNTEST_PREFIX = $(GLAFP_UTILS)/runstdtest/
VERBATIM_PREFIX = $(GLAFP_UTILS)/verbatim/
+SGMLVERB_PREFIX = $(GLAFP_UTILS)/sgmlverb/
ETAGS_PREFIX = $(GLAFP_UTILS)/etags/
MSUB_PREFIX = $(GLAFP_UTILS)/msub/
LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/
LITERATE = $(FPTOOLS_TOP)/literate
LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/
+INFO_PREFIX = $(FPTOOLS_TOP)/literate/info-utils/
TEXI2HTML_PREFIX = $(LITERATE_PREFIX)texi2html/
HAPPY_PREFIX = $(FPTOOLS_TOP)/happy/src/
+GREENCARD_PREFIX = $(FPTOOLS_TOP)/green-card/src/
UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/
UGEN_PREFIX = $(FPTOOLS_TOP)/ghc/utils/ugen/
HC = $(FPTOOLS_TOP)/ghc/driver/ghc
MKDEPENDHS = $(HC)
-#
-# The compiler proper is built with the 1.2 compiler,
-# so when building the dependencies, we need mkdependHS
-# for the 1.2 compiler.
-#
-MKDEPENDHS_1_2 = mkdependHS-1.2
-
#-----------------------------------------------------------------------------
# C compiler
#
RAWCPP = @RAWCPP@
GNUCPP = @GNUCPP@
INSTALL = @INSTALL@
+#
+# Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
+# install-sh script (if chosen). This not terribly useful to us, so we convert
+# it into an abs. path.
+#
+INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
LATEX = latex
LN_S = @LN_S@
MANMACROS = -man
RM = rm -f
SED = @SedCmd@
SHELL = /bin/sh
+#
+# In emergency situations, REAL_SHELL is used to perform shell commands
+# from within the ghc driver script, by scribbling the command line to
+# a temp file and then having $(REAL_SHELL) execute it.
+#
+# The reason for having to do this is that overly long command lines
+# cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
+# 2.5.1), which is why this backdoor is provided. The situation of overly
+# long command lines is either encountered while doing `make boot' in ghc/compiler,
+# or when linking the compiler binary (`hsc').
+#
+# We do not use SHELL to execute long commands, as `make' will more than likely
+# override whatever setting you have in your environment while executing.
+
+# By default, REAL_SHELL is set equal SHELL, which is not really a smart move
+# as it SHELL that will show up the bogosity in the first place, but setting
+# it to anything else isn't really portable.
+#
+# ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
+# with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
+# command shell.
+#
+REAL_SHELL=$(SHELL)
SIZE = size
STRIP = strip
TAR = @TarCmd@
+
+#
+# Under cygwin32, we have to deal with .exe suffixes
+#
+EXE_SUFFIX=@ExeSuffix@
+
#
# This is special to literate/, ToDo: add literate-specific
# configure setup to literate/.
UNAME = uname
YACC = @YaccCmd@
+#-----------------------------------------------------------------------------
+# SGML stuff (currently not configured - we assume you have it)
+
+SGML2LATEX = sgml2latex
+SGML2HTML = sgml2html
+SGML2INFO = sgml2info
+SGML2TXT = sgml2txt
#-----------------------------------------------------------------------------
# FPtools support software
# Stuff from fptools/glafp-utils
MKDEPENDC = $(MKDEPENDC_PREFIX)mkdependC
-FASTMAKE = $(FASTMAKE_PREFIX)fastmake
LTX = $(LTX_PREFIX)ltx
MKDIRHIER = $(MKDIRHIER_PREFIX)mkdirhier
LNDIR = $(LNDIR_PREFIX)lndir
MSUB = $(MSUB_PREFIX)msub
ETAGS = $(ETAGS_PREFIX)etags
VERBATIM = $(VERBATIM_PREFIX)verbatim
+SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb
+SGML2LATEX = sgml2latex
RUNTEST = $(RUNTEST_PREFIX)runstdtest
HAPPY = @HappyCmd@
+HAPPY_VERSION = @HappyVersion@
LX = @LxCmd@
-
-ifeq "$(HAPPY)" ""
-HAPPY = $(HAPPY_PREFIX)happy
-endif
+GREENCARD = $(FPTOOLS_TOP)/green-card/src/green-card
#
# Stuff from fptools/literate
# Options for the compiling different `ways'. Various projects within
# the glorious fptools tree support building in various user-configured
# ways. For instance, you could set up one `way' such that the prelude
-# libraries and hslibs all were built with the option -ffoldr-build-on.
+# libraries all were built with the option -ffoldr-build-on.
#
# To configure up your own way, have a look at some of the standard ways
# such as profiling, and create your own set of WAY_*_OPTS defs below.