#
################################################################################
#
-# config.mk.in-template
+# config.mk.in
#
-# This file defines all the variables that set the configuration of
-# a particular build.
+# This file supplies defaults for many tweakable build configuration
+# options. Some of the defaults are filled in by the autoconf-generated
+# configure script.
#
+# DO NOT EDIT THIS FILE!
#
-################################################################################
-
-# The configuration is defined in two steps:
-#
-# 1. The builder (i.e. the person doing the build)
-# copies this file, config.mk.in-template
-# to config.mk.in
+# - config.mk is auto-generated from config.mk.in by configure.
+# This may be triggered automatically by the build system (say
+# if config.mk.in has changed more recently than config.mk),
+# so if you edit config.mk your changes will be spammed.
#
-# 2. S/he then edits it manually (gasp) to reflect any configuration
-# options s/he wants.
+# - Settings in this file may be overriden by giving replacement
+# definitions in build.mk. See build.mk.sample for a good
+# starting point for a build.mk file.
#
-# 3. Then s/he runs "configure", which generates config.mk from
-# config.mk.in, substituting for system/platform-dependent things
-# enclosed in @at-signs@.
+# If you don't have a build.mk file then you get defaults for everything.
+# The defaults should provide a reasonable vanilla build.
#
# This is one of only two files that configure generates (the other is config.h)
#
-# Note that after subsequent edits of config.mk.in for a build, the configure script
-# will have to be re-run manually to have the change reflected in config.mk.
-#
-
# There is a section below for each project within the fptools suite
#
# PLUS
# A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
# specifier. E.g. sparc-sun-solaris2
+#
+# Build platform: the platform on which we are doing this build
+# Host platform: the platform on which these binaries will run
+# Target platform: the platform for which this compiler will generate code
+#
+# We don't support build & host being different, because the build
+# process creates binaries that are run during the build, and also
+# installed.
+#
+# If host & target are different, then we are building a compiler
+# which will generate intermediate .hc files to port to the target
+# architecture for bootstrapping. The libraries and stage 2 compiler
+# will be built as HC files for the target system, and likely won't
+# build on this host platform.
+#
+# Guidelines for when to use HOST vs. TARGET:
+#
+# - In the build system (Makefile, foo.mk), normally we should test
+# $(HOSTPLATFORM). There are some cases (eg. installation), where
+# we expect $(HOSTPLATFORM)==$(TARGETPLATFORM), so in those cases it
+# doesn't matter which is used.
+#
+# - In the compiler itself, we should test HOST or TARGET depending
+# on whether the conditional relates to the code being generated, or
+# the platform on which the compiler is running. For stage 2,
+# HOSTPLATFORM should be reset to be TARGETPLATFORM (we currently
+# don't do this, but we should).
+#
+# - In the RTS and library code, we should be testing TARGET only.
+#
+# NOTE: cross-compiling is not well supported by the build system.
+# You have to do a lot of work by hand to cross compile: see the
+# section on "Porting GHC" in the Building Guide.
HOSTPLATFORM = @HostPlatform@
TARGETPLATFORM = @TargetPlatform@
-BUILDPLATFORM = @HostPlatform@
+BUILDPLATFORM = @BuildPlatform@
# Hack alert:
-# in one or two places, we need to get at the OS version (major and perhaps even minor),
-# HostOS_Full is the OS name reported by AC_CANONICAL_SYSTEM.
+# in one or two places, we need to get at the OS version (major and
+# perhaps even minor), HostOS_Full is the OS name reported by
+# AC_CANONICAL_SYSTEM.
#
HostPlatform_CPP = @HostPlatform_CPP@
HostArch_CPP = @HostArch_CPP@
HostOS_Full = @HostOS_Full@
HostVendor_CPP = @HostVendor_CPP@
-#
-# ToDo: check if these can be purged now. -- sof
-#
+TargetPlatform_CPP = @TargetPlatform_CPP@
+TargetArch_CPP = @TargetArch_CPP@
+TargetOS_CPP = @TargetOS_CPP@
+TargetVendor_CPP = @TargetVendor_CPP@
+
+BuildPlatform_CPP = @BuildPlatform_CPP@
+BuildArch_CPP = @BuildArch_CPP@
+BuildOS_CPP = @BuildOS_CPP@
+BuildVendor_CPP = @BuildVendor_CPP@
-@HostPlatform_CPP@_HOST = 1
-@HostPlatform_CPP@_TARGET = 1
-@HostPlatform_CPP@_BUILD = 1
+@HostPlatform_CPP@_HOST = 1
+@TargetPlatform_CPP@_TARGET = 1
+@BuildPlatform_CPP@_BUILD = 1
-@HostArch_CPP@_HOST_ARCH = 1
-@HostArch_CPP@_TARGET_ARCH = 1
-@HostArch_CPP@_BUILD_ARCH = 1
+@HostArch_CPP@_HOST_ARCH = 1
+@TargetArch_CPP@_TARGET_ARCH = 1
+@BuildArch_CPP@_BUILD_ARCH = 1
-@HostOS_CPP@_HOST_OS = 1
-@HostOS_CPP@_TARGET_OS = 1
-@HostOS_CPP@_BUILD_OS = 1
+@HostOS_CPP@_HOST_OS = 1
+@TargetOS_CPP@_TARGET_OS = 1
+@BuildOS_CPP@_BUILD_OS = 1
-@HostVendor_CPP@_HOST_VENDOR = 1
-@HostVendor_CPP@_TARGET_VENDOR = 1
-@HostVendor_CPP@_BUILD_VENDOR = 1
+@HostVendor_CPP@_HOST_VENDOR = 1
+@TargetVendor_CPP@_TARGET_VENDOR = 1
+@BuildVendor_CPP@_BUILD_VENDOR = 1
# Leading underscores on symbol names in object files
# Valid options: YES/NO
# Pin a suffix on executables? If so, what (Windows only).
exeext=@exeext@
+# Windows=YES if on a Windows platform
+ifneq "$(findstring $(HostOS_CPP), mingw32 cygwin32)" ""
+Windows=YES
+else
+Windows=NO
+endif
+
################################################################################
#
# project-wide flags
# rather than registerised code, i.e., disable the mangler?
BootingFromUnregisterisedHc = @BootingFromUnregisterisedHc@
-# build the libs first if we're bootstrapping from .hc files
+# Build Order: we build Happy, Haddock and Alex before GHC if they are
+# in this source tree, just in case our GHC build depends on these
+# local builds rather than installed versions of the tools.
+#
+# Build the libs first if we're bootstrapping from .hc files.
ifeq "$(BootingFromHc)" "YES"
-AllProjects = glafp-utils hslibs ghc green-card happy hdirect hood nofib
+AllProjects = glafp-utils happy alex haddock libraries hslibs ghc greencard hdirect hood nofib docs
else
-AllProjects = glafp-utils ghc hslibs green-card happy hdirect hood nofib
+AllProjects = glafp-utils happy alex haddock ghc libraries hslibs greencard hdirect hood nofib docs
endif
#
IncludeTestDirsInBuild=NO
#
+# Should the various project example directories be built?
+#
+IncludeExampleDirsInBuild=NO
+
+#
# Which ways should SGML documents be built?
# options are: dvi ps pdf html rtf
#
SGMLDocWays=
+#
+# Which ways should DocBook XML documents be built?
+# options are: dvi ps pdf html
+#
+XMLDocWays=
+
################################################################################
#
# GHC project
# used to compile GHC. Useful when bootstrapping.
GhcHcOpts=-Rghc-timing
-# Extra Haskell compiler options to use when compiling all Haskell
-# *programs* (not libraries), including GHC itself.
-# Typical options to use here:
-#
-# -H25m use a bigger heap (to speed up compilation)
-#
-# -O compile an optimised compiler
-#
-FptoolsHcOpts=-O
+# Extra options added to specific stages of the compiler bootstrap.
+# These are placed later on the command line, and may therefore
+# override options from $(GhcHcOpts).
+GhcStage1HcOpts=
+GhcStage2HcOpts=
+GhcStage3HcOpts=
# Build a compiler that will build *unregisterised* libraries and
# binaries by default. Unregisterised code is supposed to compile and
# (way 'u') to get unregisterised code, but the default way will be
# registerised.
#
-# NOTE: this is not the same as building the compiler itself
-# unregisterised. That's done by either (a) bootstrapping with a
-# compiler that was built with GhcUnregisterized=YES, or (b)
-# bootstrapping with a compiler that has way 'u' libraries, and the
-# flag '-unreg' is added to GhcHcOpts above.
+# NOTE: the stage1 compiler will be a registerised binary (assuming
+# the compiler you build with is generating registerised binaries), but
+# the stage2 compiler will be an unregisterised binary.
#
GhcUnregisterised=NO
# (as well as a C backend)
#
# Target platforms supported:
-# i386 & sparc
-ifneq "$(findstring $(HostArch_CPP), i386 sparc)" ""
+# i386, sparc & powerpc
+ifneq "$(findstring $(HostArch_CPP), i386 sparc powerpc)" ""
GhcWithNativeCodeGen=YES
else
GhcWithNativeCodeGen=NO
endif
+# Include support for generating Java
+GhcWithJavaGen=NO
+
HaveLibDL = @HaveLibDL@
+HaveRtldNext = @HaveRtldNext@
+HaveRtldLocal = @HaveRtldLocal@
# Include GHCi in the compiler. Default to NO for the time being.
-ifneq "$(findstring $(HostOS_CPP), mingw32 linux solaris2 freebsd netbsd openbsd)" ""
+ifneq "$(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin)" ""
GhcWithInterpreter=YES
-ifeq "$(HaveLibDL)" "YES"
-SRC_HC_OPTS += -ldl
-endif
else
GhcWithInterpreter=NO
endif
BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
#------------------------------------------------------------------------------
-# Options for GHC's Prelude
+# Options for Libraries
# What extra ways to build the libraries in
# In addition to the normal sequential way, the default is to also build
GhcLibWays=p
endif
-# Option flags to pass to GHC when it's compiling prelude modules
-# *and* standard library modules (std) *and* modules in hslibs
-# Typically these are things like -O or -dcore-lint
-# The ones that are *essential* are wired into ghc/lib/Makefile
+# In addition, the RTS is built in some further variations. Ways that
+# make sense here:
+#
+# thr : threaded
+# thr_p : threaded profiled
+# debug : debugging (compile with -g for the C compiler, and -DDEBUG)
+# debug_p : debugging profiled
+# thr_debug : debugging threaded
+# thr_debug_p : debugging threaded profiled
+#
+ifeq "$(BootingFromHc)" "YES"
+GhcRTSWays=
+else
+GhcRTSWays=thr thr_p debug
+endif
+
+# Option flags to pass to GHC when it's compiling modules in
+# fptools/libraries. Typically these are things like -O or
+# -dcore-lint or -H32m. The ones that are *essential* are wired into
+# the build system.
#
# -O is pretty desirable, otherwise no inlining of prelude
# things (incl "+") happens when compiling with this compiler
#
MinimalUnixDeps=@MinimalUnixDeps@
+# Strip local symbols from libraries? This can make the libraries smaller,
+# but makes debugging somewhat more difficult. Doesn't work with all ld's.
+#
+StripLibraries=NO
+
+
+# ----------------------------------------------------------------------------
+# Object-file splitting
+#
+# Set SplitObjs=YES or NO in your build.mk
+#
+# Don't use -split-objs in in GhcLibHcOpts, because the build
+# system needs to do other special magic if you are
+# doing object-file splitting
+
# Don't split object files for libs if we're building DLLs, or booting from
# .hc files.
SplitObjs=YES
ifeq "$(GhcUnregisterised)" "YES"
SplitObjs=NO
endif
-
-# Strip local symbols from libraries? This can make the libraries smaller,
-# but makes debugging somewhat more difficult. Doesn't work with all ld's.
-#
-StripLibraries=NO
+ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux"
+SplitObjs=NO
+endif
# ----------------------------------------------------------------------------
# Options for GHC's RTS
-# This is a good way to set things like -optc-g and -optc-DDEBUG for the RTS.
-# GhcRtsHcOpts is used when compiling .hc files and .c files.
-# GhcRtsCcOpts is used when compiling .c files only.
-
-# For a debugging RTS:
-# GhcRtsHcOpts = -optc-DDEBUG
-# GhcRtsCcOpts = -g
-
-# For an optimised RTS:
+# For an optimised RTS (you probably don't want to change these; we build
+# a debugging RTS by default now. Use -package rts_debug to get it).
GhcRtsHcOpts=-O2
-GhcRtsCcOpts=-O2 -fomit-frame-pointer
+GhcRtsCcOpts=-fomit-frame-pointer
# Include the front panel code? Needs GTK+.
GhcRtsWithFrontPanel = NO
################################################################################
#
-# hslibs project
+# libraries project
#
################################################################################
-# Build HsLibs for which compiler?
-
-# If $(HsLibsFor) == hugs or ghc, we assume we're building for the
-# compiler/interpreter in the same source tree.
-
-# HsLibsFor = ghc | hugs | nhc | hbc
-HsLibsFor = ghc
-
-# hslibs for GHC also uses the following variables (defined above):
-# GhcLibWays, GhcLibHcOpts, GhcLibToolsHcOpts, DLLized, StripLibraries
-
# Build the Haskell Readline bindings?
#
-GhcLibsWithReadline=@HaveReadlineHeaders@
+GhcLibsWithReadline=@GhcLibsWithReadline@
# Libraries needed for linking with readline
LibsReadline=@LibsReadline@
# Math library
LIBM=@LIBM@
-# Build the Haskell OpenGL/GLUT binding?
+# Build the ObjectIO ?
+#
+GhcLibsWithObjectIO=@GhcLibsWithObjectIO@
+
+# Build the Haskell OpenGL binding?
#
-GhcLibsWithHOpenGL=@GhcLibsWithHOpenGL@
+GhcLibsWithOpenGL=@GhcLibsWithOpenGL@
+GLU_CFLAGS=@GLU_CFLAGS@
+GLU_LIBS=@GLU_LIBS@
+# Build the Haskell OpenAL binding?
+#
+GhcLibsWithOpenAL=@GhcLibsWithOpenAL@
+
+# Build the Haskell GLUT binding?
+#
+GhcLibsWithGLUT=@GhcLibsWithGLUT@
+GLUT_LIBS=@GLUT_LIBS@
+
+# X11 stuff
+#
+GhcLibsWithX11=@GhcLibsWithX11@
X_CFLAGS=@X_CFLAGS@
X_LIBS=@X_LIBS@
+# .NET interop support?
+#
+DotnetSupport=@DotnetSupport@
+
+# Build unix package?
+#
+GhcLibsWithUnix=@GhcLibsWithUnix@
+
################################################################################
#
# happy project
################################################################################
#
-# green-card project
+# greencard project
#
-# Green-card specific options
+# GreenCard specific options
#
################################################################################
DEFAULT_TMPDIR = C:/TEMP
endif
-# FPTOOLS_TOP: the top of the fptools hierarchy, absolute path.
-
-ifeq "$(findstring $(TARGETPLATFORM), i386-unknown-cygwin32 i386-unknown-mingw32)" ""
+# FPTOOLS_TOP: the top of the fptools hierarchy, absolute path. (POSIX / unix-style path).
FPTOOLS_TOP_ABS = @hardtop@
-else
-FPTOOLS_TOP_ABS = $(subst \,/,$(shell cygpath -w @hardtop@))
-endif
-# Keep the Unix-style path to use with Unix tools (e.g. in ghc-inplace script)
-FPTOOLS_TOP_ABS_UNIX = @hardtop@
+# The platform specific version of 'hardtop'.
+FPTOOLS_TOP_ABS_PLATFORM = @hardtop_plat@
#
# Installation directories, we don't use half of these,
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
-datadir = @datadir@
-
-#sysconfdir = @datadir@
-#sharedstatedir = @sharedstatedir@
-#localstatedir = @localstatedir@
-libdir = @libdir@
+datadir0 = @datadir@
+libdir0 = @libdir@
includedir = @includedir@
oldincludedir = @oldincludedir@
mandir = @mandir@
-#UNUSED:infodir = @infodir@
-#UNUSED:srcdir = @srcdir@
+ifeq "$(Windows)" "YES"
+
+ifeq "$(strip $(prefix))" ""
+prefix = c:/ghc
+endif
+
+# Hack: our directory layouts tend to be different on Windows, so
+# hack around configure's bogus assumptions here.
+datadir = $(prefix)
+libdir = $(prefix)
+
+else
#
-# override libdir and datadir to put project-specific stuff in
+# Unix: override libdir and datadir to put project-specific stuff in
# a subdirectory with the version number included.
#
-libdir := $(if $(ProjectNameShort),$(libdir)/$(ProjectNameShort)-$(ProjectVersion),$(libdir))
-datadir := $(if $(ProjectNameShort),$(datadir)/$(ProjectNameShort)-$(ProjectVersion),$(datadir))
+libdir = $(if $(ProjectNameShort),$(libdir0)/$(ProjectNameShort)-$(ProjectVersion),$(libdir0))
+datadir = $(if $(ProjectNameShort),$(datadir0)/$(ProjectNameShort)-$(ProjectVersion),$(datadir0))
+
+endif # Windows
+
+# Default place for putting interface files is $(libdir)
+# (overriden for packages in package.mk)
+ifacedir = $(libdir)
#
# Default values for most of the above are only set if
mandir = $(prefix)/man
endif
+#-----------------------------------------------------------------------------
+# install configuration
-################################################################################
#
-# Utilities programs: flags
+# Set this to have files installed with a specific owner
#
-################################################################################
+INSTALL_OWNER =
+
+#
+# Set this to have files installed with a specific group
+#
+INSTALL_GROUP =
+
+#
+# Invocations of `install' for the four different classes
+# of targets:
+#
+INSTALL_PROGRAM = $(INSTALL) -m 755
+INSTALL_SCRIPT = $(INSTALL) -m 755
+INSTALL_SHLIB = $(INSTALL) -m 755
+INSTALL_DATA = $(INSTALL) -m 644
+INSTALL_DIR = $(MKDIRHIER)
+
+# -----------------------------------------------------------------------------
+# Utilities programs: flags
# If you want to give any standard flags to pretty much any utility
# (see utils.mk for a complete list), by adding a line here
#
# SRC_HC_OPTS += -O
+SRC_HC_OPTS += -H16m -O
+
# These flags make flex 8-bit
SRC_FLEX_OPTS += -8
VERBATIM_PREFIX = $(GLAFP_UTILS)/verbatim/
SGMLVERB_PREFIX = $(GLAFP_UTILS)/sgmlverb/
ETAGS_PREFIX = $(GLAFP_UTILS)/etags/
-MSUB_PREFIX = $(GLAFP_UTILS)/msub/
LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/
MKDIRHIER_PREFIX = $(GLAFP_UTILS)/mkdirhier/
DOCBOOK_PREFIX = $(GLAFP_UTILS)/docbook/
-LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/
+HADDOCK_PREFIX = $(FPTOOLS_TOP)/haddock/
-HAPPY_PREFIX = $(FPTOOLS_TOP)/happy/src/
-GREENCARD_PREFIX = $(FPTOOLS_TOP)/green-card/src/
+LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/
UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/
HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/
-HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hstags/
+HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hasktags/
HSC2HS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hsc2hs/
#-----------------------------------------------------------------------------
# (because the version numbers have to be calculated).
GHC = @WithGhc@
+GhcDir = $(dir $(GHC))
GhcVersion = @GhcVersion@
GhcMajVersion = @GhcMajVersion@
GhcMinVersion = @GhcMinVersion@
GhcPatchLevel = @GhcPatchLevel@
+# Canonicalised ghc version number, used for easy (integer) version
+# comparisons. We must expand $(GhcMinVersion) to two digits by
+# adding a leading zero if necessary:
+ifneq "$(findstring $(GhcMinVersion), 0 1 2 3 4 5 6 7 8 9)" ""
+GhcCanonVersion = $(GhcMajVersion)0$(GhcMinVersion)
+else
+GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion)
+endif
+
HBC = @HBC@
NHC = @NHC@
# tree). We can refer to "this ghc" as $(GHC_INPLACE):
GHC_INPLACE = $(FPTOOLS_TOP)/ghc/compiler/ghc-inplace
+GHC_STAGE1 = $(FPTOOLS_TOP)/ghc/compiler/stage1/ghc-inplace
+GHC_STAGE2 = $(FPTOOLS_TOP)/ghc/compiler/stage2/ghc-inplace
+GHC_STAGE3 = $(FPTOOLS_TOP)/ghc/compiler/stage3/ghc-inplace
#-----------------------------------------------------------------------------
# C compiler
HaveGcc = @HaveGcc@
UseGcc = YES
WhatGccIsCalled = @WhatGccIsCalled@
+GccVersion = @GccVersion@
ifeq "$(strip $(HaveGcc))" "YES"
ifneq "$(strip $(UseGcc))" "YES"
CC = cc
else
CC = $(WhatGccIsCalled)
+ GccDir = $(dir $(WhatGccIsCalled))
endif
endif
# default C compiler flags
SRC_CC_OPTS = @SRC_CC_OPTS@
+ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux"
+SRC_CC_OPTS += -G0
+endif
+
+# Solaris2 strikes again.
+unix_SRC_HSC2HS_OPTS += @unix_SRC_HSC2HS_OPTS@
+
#-----------------------------------------------------------------------------
# GMP Library (version 2.0.x or above)
#
LibGmp = @LibGmp@
#-----------------------------------------------------------------------------
-# Regex library
+# Mingwex Library
+#
+HaveLibMingwEx = @HaveLibMingwEx@
+
+#-----------------------------------------------------------------------------
+# HaskellSupport framework (Mac OS X)
+#
+HaveFrameworkHaskellSupport = @HaveFrameworkHaskellSupport@
+
+#-----------------------------------------------------------------------------
+# Regex library
# (if present in libc use that one, otherwise use the one in the tree)
#
-HaveRegex = @HaveRegex@
+HavePosixRegex = @HavePosixRegex@
#-----------------------------------------------------------------------------
# GTK+
GTK_CONFIG = @GTK_CONFIG@
-GTK_VERSION = @GTK_VERSION@
#-----------------------------------------------------------------------------
-# Flex
+# Flex (currently unused, could be moved to glafp-utils)
-FLEX = @LEX@
+# FLEX = @LEX@
# Don't bother with -lfl, we define our own yywrap()s anyway.
-FLEX_LIB =
+# FLEX_LIB =
#WAS:FLEX_LIB = @LEXLIB@
#-----------------------------------------------------------------------------
ArSupportsInput = @ArSupportsInput@
# Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
BASH = /usr/local/bin/bash
-#
-# Could be either gzip or compress
-#
-COMPRESS = @CompressCmd@
-COMPRESS_SUFFIX = @CompressSuffix@
CONTEXT_DIFF = @ContextDiffCmd@
CP = cp
MV = mv
NROFF = nroff
PERL = @PerlCmd@
+PYTHON = @PythonCmd@
PIC = pic
PREPROCESSCMD = $(CC) -E
-PRINTER = lpr
RANLIB = @RANLIB@
RM = rm -f
SED = @SedCmd@
ZIP = zip
#
-# Under Windows, we have to deal with .exe suffixes
-#
-EXE_SUFFIX=@exeext@
-
-#
# This is special to literate/, ToDo: add literate-specific
# configure setup to literate/.
#
TIME = @TimeCmd@
TROFF = troff
UNAME = uname
-YACC = @YaccCmd@
#-----------------------------------------------------------------------------
# SGML stuff
DOCBOOK_CATALOG = @Catalog@
#-----------------------------------------------------------------------------
+# DocBook XML stuff
+
+XSLTPROC = @XsltprocCmd@
+XMLLINT = @XmllintCmd@
+FOP = @FopCmd@
+XMLTEX = @XmltexCmd@
+PDFXMLTEX = @PdfxmltexCmd@
+DVIPS = @DvipsCmd@
+
+DIR_DOCBOOK_XSL = @DIR_DOCBOOK_XSL@
+
+XSLTPROC_LABEL_OPTS = --stringparam toc.section.depth 3 \
+ --stringparam section.autolabel 1 \
+ --stringparam section.label.includes.component.label 1
+
+#-----------------------------------------------------------------------------
# FPtools support software
# Stuff from fptools/glafp-utils
LTX = $(LTX_PREFIX)ltx
MKDIRHIER = $(MKDIRHIER_PREFIX)mkdirhier
LNDIR = $(LNDIR_PREFIX)lndir
-MSUB = $(MSUB_PREFIX)msub
ETAGS = $(ETAGS_PREFIX)etags
VERBATIM = $(VERBATIM_PREFIX)verbatim
SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb
RUNTEST = $(RUNTEST_PREFIX)runstdtest
LX = @LxCmd@
-GREENCARD = $(FPTOOLS_TOP)/green-card/src/green-card
BLD_DLL = dllwrap
ILASM = ilasm
#
+# ghc-pkg
+#
+GHC_PKG = @GhcPkgCmd@
+
+#
+# GreenCard
+#
+GREENCARD = @GreenCardCmd@
+GREENCARD_VERSION = @GreenCardVersion@
+
+#
# Happy
#
HAPPY = @HappyCmd@
#
# Options to pass to Happy when we're going to compile the output with GHC
#
-GHC_HAPPY_OPTS = $(shell if ( test `echo $(HAPPY_VERSION) | sed -e "s/\(.*\)\..*/\1/g"` "-gt" "1" || test `echo $(HAPPY_VERSION) | sed -e "s/.*\.\(.*\)/\1/g"` "-ge" "9" ); then echo -agc; else echo -g; fi)
+GHC_HAPPY_OPTS = -agc
+
+# Temp. to work around performance problems in the HEAD around 8/12/2003,
+# A Happy compiled with this compiler needs more stack.
+SRC_HAPPY_OPTS = +RTS -K2m -RTS
+
+#
+# Alex
+#
+ALEX = @AlexCmd@
+ALEX_VERSION = @AlexVersion@
+#
+# Options to pass to Happy when we're going to compile the output with GHC
+#
+GHC_ALEX_OPTS = -g
+
+#
+# Haddock
+#
+HADDOCK = @HaddockCmd@
+HADDOCK_INPLACE = $(HADDOCK_PREFIX)/src/haddock-inplace
#
# Stuff from fptools/literate
#
# Stuff from fptools/ghc/utils
#
-UNLIT = $(UNLIT_PREFIX)unlit$(EXE_SUFFIX)
-HP2PS = $(HP2PS_PREFIX)hp2ps$(EXE_SUFFIX)
-HSTAGS = $(HSTAGS_PREFIX)hstags
+UNLIT = $(UNLIT_PREFIX)unlit$(exeext)
+HP2PS = $(HP2PS_PREFIX)hp2ps$(exeext)
+HSTAGS = $(HSTAGS_PREFIX)hasktags
HSC2HS = $(HSC2HS_PREFIX)hsc2hs-inplace
#
WAY_mg_HC_OPTS=-gransim
#
+# These ways apply to the RTS only:
+#
+
+# Way 'thr':
+WAY_thr_NAME=threaded
+WAY_thr_HC_OPTS=-optc-DTHREADED_RTS
+
+# Way 'thr_p':
+WAY_thr_p_NAME=threaded profiled
+WAY_thr_p_HC_OPTS=-optc-DTHREADED_RTS -prof
+
+# Way 'debug':
+WAY_debug_NAME=debug
+WAY_debug_HC_OPTS=-optc-DDEBUG
+
+# Way 'debug_p':
+WAY_debug_p_NAME=debug profiled
+WAY_debug_p_HC_OPTS=-optc-DDEBUG -prof
+
+# Way 'thr_debug':
+WAY_thr_debug_NAME=threaded
+WAY_thr_debug_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG
+
+# Way 'thr_debug_p':
+WAY_thr_debug_p_NAME=threaded
+WAY_thr_debug_p_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -prof
+
+#
# Add user-way configurations here:
#
WAY_A_NAME=