-#################################################################################
+################################################################################
#
# paths.mk
#
# This file defines Make variables for standard directories
# and file lists
#
-#################################################################################
-
-
-#-----------------------------------------------------------------
-#
-# Installation setup
-#
-
-#-----------------------------------------------------------------------------
-# install configuration
-#
-# The install standard target is guided by the following four variables
-#
-# INSTALL_PROGS (installed in $(bindir))
-# INSTALL_LIBS (installed in $(libdir))
-# INSTALL_LIBEXECS (installed in $(libexecdir))
-# INSTALL_DATAS (installed in $(datadir))
-# INSTALL_IFACES (installed in $(ifacedir))
-#
-# see target.mk for more information.
-#
+################################################################################
-#
-# Setting user/group ownership for the installed entities
-#
-# this stuff about "who" does the installing doesn't have make vars
-# as it is not intended to be run-time changeable.
-#
-ifneq "$(OWNER)" ""
-INSTALL_OWNER = -o $(OWNER)
-else
-INSTALL_OWNER =
-endif
-
-ifneq "$(GROUP)" ""
-INSTALL_GROUP = -g $(GROUP)
-else
-INSTALL_GROUP =
-endif
-
-SRC_INSTALL_OPTS += $(INSTALL_OWNER) $(INSTALL_GROUP)
-
-#
-# Invocations of `install' for the four different classes
-# of targets:
-#
-
-INSTALL_PROGRAM = $(INSTALL) -m 755
-INSTALL_SCRIPT = $(INSTALL) -m 755
-INSTALL_SHLIB = $(INSTALL) -m 755
-INSTALL_DATA = $(INSTALL) -m 644
-INSTALL_DIR = $(FPTOOLS_TOP)/glafp-utils/mkdirhier/mkdirhier
-
-#
-# The install variables does not have any defaults,
-# what files to install have to be specified in the Makefiles.
-#
-
-#################################################################################
+################################################################################
#
# Standard variable names
#
-#################################################################################
+################################################################################
# The fptools mk setup defines a set of standard names which are used
# by the standard targets provided by mk. One example of this is the
# use of standard names for specifying what files to compile, their
ALL_SRCS = $(wildcard $(patsubst ./%, %, \
$(patsubst %,%/*.hs, . $(ALL_DIRS)) \
$(patsubst %,%/*.lhs, . $(ALL_DIRS)) \
+ $(patsubst %,%/*.hs-boot, . $(ALL_DIRS)) \
+ $(patsubst %,%/*.lhs-boot, . $(ALL_DIRS)) \
$(patsubst %,%/*.y, . $(ALL_DIRS)) \
$(patsubst %,%/*.ly, . $(ALL_DIRS)) \
+ $(patsubst %,%/*.x, . $(ALL_DIRS)) \
$(patsubst %,%/*.c, . $(ALL_DIRS)) \
$(patsubst %,%/*.hc, . $(ALL_DIRS)) \
$(patsubst %,%/*.S, . $(ALL_DIRS)) \
PRE_HS_SRCS = $(filter %.hs, $(PRE_SRCS))
PRE_LHS_SRCS = $(filter %.lhs, $(PRE_SRCS))
+PRE_HS_BOOT_SRCS = $(filter %.hs-boot, $(PRE_SRCS)) \
+ $(filter %.lhs-boot, $(PRE_SRCS))
+
GC_SRCS = $(filter %.gc, $(PRE_SRCS))
HSC_SRCS = $(filter %.hsc, $(PRE_SRCS))
HAPPY_Y_SRCS = $(filter %.y, $(PRE_SRCS))
HAPPY_LY_SRCS = $(filter %.ly, $(PRE_SRCS))
HAPPY_SRCS = $(HAPPY_Y_SRCS) $(HAPPY_LY_SRCS)
+ALEX_SRCS = $(filter %.x, $(PRE_SRCS))
DERIVED_GC_SRCS = $(patsubst %.gc, %.hs, $(GC_SRCS)) \
$(patsubst %.gc, %_stub_ffi.c, $(GC_SRCS)) \
DERIVED_HAPPY_SRCS = $(patsubst %.y, %.hs, $(HAPPY_Y_SRCS)) \
$(patsubst %.ly, %.hs, $(HAPPY_LY_SRCS))
+DERIVED_ALEX_SRCS = $(patsubst %.x, %.hs, $(ALEX_SRCS))
+
DERIVED_HC_SRCS = $(patsubst %.hs, %.hc, $(PRE_HS_SRCS)) \
$(patsubst %.lhs, %.hc, $(PRE_LHS_SRCS))
DERIVED_SRCS = $(DERIVED_GC_SRCS) \
$(DERIVED_HSC_SRCS) \
$(DERIVED_HAPPY_SRCS) \
+ $(DERIVED_ALEX_SRCS) \
$(DERIVED_HC_SRCS)
# EXCLUDED_SRCS can be set in the Makefile, otherwise it defaults to empty.
EXCLUDED_HAPPY_Y_SRCS = $(filter %.y, $(EXCLUDED_SRCS))
EXCLUDED_HAPPY_LY_SRCS = $(filter %.ly, $(EXCLUDED_SRCS))
EXCLUDED_HAPPY_SRCS = $(EXCLUDED_HAPPY_Y_SRCS) $(EXCLUDED_HAPPY_LY_SRCS)
+EXCLUDED_ALEX_SRCS = $(filter %.x, $(EXCLUDED_SRCS))
EXCLUDED_HS_SRCS = $(filter %.hs, $(EXCLUDED_SRCS))
EXCLUDED_LHS_SRCS = $(filter %.lhs, $(EXCLUDED_SRCS))
EXCLUDED_DERIVED_SRCS = $(patsubst %.hsc, %.hs, $(EXCLUDED_HSC_SRCS)) \
$(patsubst %.gc, %_stub_ffi.h, $(EXCLUDED_GC_SRCS)) \
$(patsubst %.y, %.hs, $(EXCLUDED_HAPPY_Y_SRCS)) \
$(patsubst %.ly, %.hs, $(EXCLUDED_HAPPY_LY_SRCS)) \
+ $(patsubst %.x, %.hs, $(EXCLUDED_ALEX_SRCS)) \
$(patsubst %.hs, %.hc, $(EXCLUDED_HS_SRCS)) \
$(patsubst %.lhs, %.hc, $(EXCLUDED_LHS_SRCS)) \
$(patsubst %.hs, %_stub.c, $(EXCLUDED_HS_SRCS)) \
HS_OBJS = $(addsuffix .$(way_)o,$(basename $(HS_SRCS)))
HS_IFACES = $(addsuffix .$(way_)hi,$(basename $(HS_SRCS)))
+HI_BOOTS = $(patsubst %.hs-boot, %.$(way_)hi-boot, \
+ $(patsubst %.lhs-boot, %.$(way_)hi-boot, $(PRE_HS_BOOT_SRCS)))
+
+O_BOOTS = $(patsubst %.hs-boot, %.$(way_)o-boot, \
+ $(patsubst %.lhs-boot, %.$(way_)o-boot, $(PRE_HS_BOOT_SRCS)))
+
GC_C_OBJS = $(addsuffix _stub_ffi.$(way_)o,$(basename $(filter %.gc,$(SRCS))))
HSC_C_OBJS = $(addsuffix _hsc.$(way_)o,$(basename $(filter %.hsc,$(SRCS))))
-# Always remove $(EXCLUDED_C_SRCS) from C_SRCS
+ifeq "$(BootingFromHc)" "NO"
+# We don't want to build the _stub.c files ourselves, unless we're
+# bootstrapping from .hc files.
EXCLUDED_C_SRCS = $(patsubst %.lhs, %_stub.c, $(HS_SRCS)) \
$(patsubst %.hs, %_stub.c, $(HS_SRCS)) \
$(patsubst %.gc, %_stub_ffi.c, $(GC_SRCS)) \
$(patsubst %.gc, %_stub_ffi.h, $(GC_SRCS))
+endif
+# These are droppings from hsc2hs - ignore them if we see them.
+EXCLUDED_C_SRCS += $(patsubst %.hsc, %_hsc_make.c, $(HSC_SRCS))
-C_SRCS = $(filter-out $(EXCLUDED_C_SRCS),$(filter %.c,$(SRCS)))
+C_SRCS = $(filter-out $(EXCLUDED_C_SRCS),$(filter %.c %.S,$(SRCS)))
C_OBJS = $(addsuffix .$(way_)o,$(basename $(C_SRCS)))
# SCRIPT_SRCS: list of raw script files (in literate form)
SCRIPT_SRCS = $(filter %.lprl,$(SRCS))
SCRIPT_OBJS = $(addsuffix .prl,$(basename $(SCRIPT_SRCS)))
-OBJS = $(HS_OBJS) $(C_OBJS) $(GC_C_OBJS) $(SCRIPT_OBJS)
+OBJS = $(HS_OBJS) $(C_OBJS) $(GC_C_OBJS)
# The default is for $(LIBOBJS) to be the same as $(OBJS)
LIBOBJS = $(OBJS)
# that may require extra tools to create.
#
#
-MOSTLY_CLEAN_FILES += $(HS_OBJS) $(C_OBJS) $(HSC_C_OBJS)
+# NOTE: $(SCRIPT_OBJS) is not in MOSTLY_CLEAN_FILES, because in some
+# places in the tree it appears that we have source files in $(SCRIPT_OBJS).
+# Specifically glafp-utils/mkdependC/mkdependC.prl and others in ghc/driver and
+# possibly others elsewhere in the tree. ToDo: fix this properly.
+MOSTLY_CLEAN_FILES += $(HS_OBJS) $(C_OBJS) $(HSC_C_OBJS) $(GC_C_OBJS)
CLEAN_FILES += $(HS_PROG) $(C_PROG) $(SCRIPT_PROG) $(SCRIPT_LINK) \
$(PROG) $(LIBRARY) a.out \
$(DERIVED_HSC_SRCS) \
$(DERIVED_GC_SRCS) \
- $(patsubst %,%/*.$(way_)hi, . $(ALL_DIRS))
+ $(patsubst %,%/*.$(way_)hi, . $(ALL_DIRS)) \
+ $(HI_BOOTS) $(O_BOOTS)
# we delete *all* the .hi files we can find, rather than just
# $(HS_IFACES), because stale interfaces left around by modules which
CLEAN_FILES += $(DERIVED_HC_SRCS)
endif
-DIST_CLEAN_FILES += .depend *.hp *.prof
+DIST_CLEAN_FILES += .depend* *.hp *.prof
-MAINTAINER_CLEAN_FILES += $(BOOT_SRCS) $(DERIVED_HAPPY_SRCS)
+MAINTAINER_CLEAN_FILES += $(BOOT_SRCS) $(DERIVED_HAPPY_SRCS) $(DERIVED_ALEX_SRCS)
#
# `Standard' set of files to clean out.
DLL_PEN = $(FPTOOLS_TOP)/dll
+#------------------------------------------------------------------
+#
+# Stylesheet for HTML generated from DocBook XML
+#
+
+FPTOOLS_CSS = fptools.css
+FPTOOLS_CSS_ABS = $(FPTOOLS_TOP)/mk/$(FPTOOLS_CSS)