#
# target.mk
#
-# Standard targets for fptools
+# Standard targets for GHC
#
#################################################################################
#
# This file contain three groups of target rules:
#
-# 1. FPtools targets
+# 1. GHC targets
# depend*
# runtests*
#
# 2. GNU standard targets
# all*
# install* uninstall installcheck installdirs
+# install-docs*
# clean* distclean* mostlyclean* maintainer-clean*
# tags*
-# dvi ps (no info) FPTOOLS adds: pdf rtf html
-# dist binary-dist
+# dvi ps (no info) GHC adds: pdf rtf html chm HxS
# check
#
# 3. Some of the above targets have a version that
#
#
-
-##################################################################
-#
-# Recursive stuff
-#
-# At the top of the file so that recursive makes happen before
-# makes in the main directory. This is needed for some targets,
-# e.g. when building DLLs in hslibs.
-#
##################################################################
+# Pre-compute the list of sources so we don't have to do this
+# multiple times. See paths.mk.
-# Here are the diabolically clever rules that
-#
-# (a) for each "recursive target" <t>
-# propagates "make <t>" to directories in SUBDIRS
-#
-# (b) when SUBDIRS is empty,
-# for each "multi-way-target" <t>
-# calls "make -way=w <t>" for each w in $(WAYS)
-#
-# This has the effect of making the standard target
-# in each of the specified ways (as well as in the normal way
-
-# Controlling variables
-# WAYS = extra (beyond the normal way) ways to build things in
-# SUBDIRS = subdirectories to recurse into
-
-# No ways, so iterate over the SUBDIRS
-
-# note about recursively invoking make: we'd like make to drop all the
-# way back to the top level if it fails in any of the
-# sub(sub-...)directories. This is done by setting the -e flag to the
-# shell during the loop, which causes an immediate failure if any of
-# the shell commands fail.
-
-# One exception: if the user gave the -i or -k flag to make in the
-# first place, we'd like to reverse this behaviour. So we check for
-# these flags, and set the -e flag appropriately. NOTE: watch out for
-# the --no-print-directory flag which is passed to recursive
-# invocations of make.
-#
-# NOTE: Truly weird use of exit below to stop the for loop dead in
-# its tracks should any of the sub-makes fail. By my reckoning,
-# "cmd || exit $?" should be equivalent to "cmd"
-
-ifneq "$(SUBDIRS)" ""
-
-all docs runtests boot TAGS clean distclean mostlyclean maintainer-clean install html ps dvi txt::
- @echo "------------------------------------------------------------------------"
- @echo "===fptools== Recursively making \`$@' in $(SUBDIRS) ..."
- @echo "PWD = $(shell pwd)"
- @echo "------------------------------------------------------------------------"
-# Don't rely on -e working, instead we check exit return codes from sub-makes.
- @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
- for i in $(SUBDIRS); do \
- echo "------------------------------------------------------------------------"; \
- echo "==fptools== $(MAKE) $@ $(MFLAGS);"; \
- echo " in $(shell pwd)/$$i"; \
- echo "------------------------------------------------------------------------"; \
- $(MAKE) --no-print-directory -C $$i $(MFLAGS) $@; \
- if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
- done
- @echo "------------------------------------------------------------------------"
- @echo "===fptools== Finished making \`$@' in $(SUBDIRS) ..."
- @echo "PWD = $(shell pwd)"
- @echo "------------------------------------------------------------------------"
+PRE_SRCS := $(ALL_SRCS)
-dist ::
-# Don't rely on -e working, instead we check exit return codes from sub-makes.
- @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
- for i in $(SUBDIRS) ; do \
- $(MKDIRHIER_PREFIX)mkdirhier $(SRC_DIST_DIR)/$$i; \
- $(MAKE) -C $$i $(MFLAGS) $@ SRC_DIST_DIR=$(SRC_DIST_DIR)/$$i; \
- if [ $$? -eq 0 ] ; then true; else exit $$x_on_err; fi; \
- done
-endif
+##################################################################
+# Include package building machinery
-# The default dist rule:
-#
-# copy/link the contents of $(SRC_DIST_FILES) into the
-# shadow distribution tree. SRC_DIST_FILES contain the
-# build-generated files that you want to include in
-# a source distribution.
-#
-#
-ifneq "$(SRC_DIST_FILES)" ""
-dist::
- @for i in $(SRC_DIST_FILES); do \
- if ( echo "$$i" | grep "~" >/dev/null 2>&1 ); then \
- echo $(LN_S) `pwd`/`echo $$i | sed -e "s/^\([^~]*\)~.*/\1/g"` $(SRC_DIST_DIR)/`echo $$i | sed -e "s/.*~\(.*\)/\1/g"` ; \
- $(LN_S) `pwd`/`echo $$i | sed -e "s/^\([^~]*\)~.*/\1/g"` $(SRC_DIST_DIR)/`echo $$i | sed -e "s/.*~\(.*\)/\1/g"` ; \
- else \
- if (test -f "$$i"); then \
- echo $(LN_S) `pwd`/$$i $(SRC_DIST_DIR)/$$i ; \
- $(LN_S) `pwd`/$$i $(SRC_DIST_DIR)/$$i ; \
- fi; \
- fi; \
- done;
-endif
+include $(TOP)/mk/package.mk
+###################################################################
+# Suffix rules for Haskell, C and literate
-#
-# Selectively building subdirectories.
-#
-#
-ifneq "$(SUBDIRS)" ""
-$(SUBDIRS) ::
- $(MAKE) -C $@ $(MFLAGS)
-endif
+include $(TOP)/mk/suffix.mk
##################################################################
-# FPtools standard targets
+# GHC standard targets
#
# depend:
#
# Compiler produced files that are targets of the source's imports.
MKDEPENDHS_OBJ_SUFFICES=o
-depend :: $(MKDEPENDHS_SRCS) $(MKDEPENDC_SRCS)
+ifneq "$(BootingFromHc)" "YES"
+PKGCONF_DEP = $(STAMP_PKG_CONF)
+endif
+
+depend :: $(MKDEPENDHS_SRCS) $(MKDEPENDC_SRCS) $(PKGCONF_DEP)
@$(RM) .depend
@touch .depend
ifneq "$(DOC_SRCS)" ""
$(MKDEPENDC) -f .depend $(MKDEPENDC_OPTS) $(foreach way,$(WAYS),-s $(way)) -- $(CC_OPTS) -- $(MKDEPENDC_SRCS)
endif
ifneq "$(MKDEPENDHS_SRCS)" ""
- $(MKDEPENDHS) -M -optdep-f -optdep.depend $(foreach way,$(WAYS),-optdep-s -optdep$(way)) $(foreach obj,$(MKDEPENDHS_OBJ_SUFFICES),-osuf $(obj)) $(MKDEPENDHS_OPTS) $(HC_OPTS) $(MKDEPENDHS_SRCS)
+ $(MKDEPENDHS) -M -optdep-f -optdep.depend $(foreach way,$(WAYS),-optdep-s -optdep$(way)) $(foreach obj,$(MKDEPENDHS_OBJ_SUFFICES),-osuf $(obj)) $(MKDEPENDHS_OPTS) $(filter-out -split-objs, $(HC_OPTS)) $(MKDEPENDHS_SRCS)
endif
# The boot target, at a minimum generates dependency information
.PHONY: boot
-boot :: depend
+ifeq "$(NO_BOOT_TARGET)" "YES"
+boot ::
+else
+boot :: depend
+endif
##################################################################
# GNU Standard targets
# `TAGS'
# Update a tags table for this program.
#
-# `dvi' `ps' `pdf' `html' `pdf'
+# `dvi' `ps' `pdf' `html' `chm' `HxS' `rtf'
# Generate DVI/PS/PDF files for LaTeX/DocBook docs. Not everything is
# supported everywhere, but the intention is to standardise on DocBook
# producing all formats.
#
-# `dist' `binary-dist'
-# Create a distribution tar file for this program. The tar file
-# should be set up so that the file names in the tar file start with
-# a subdirectory name which is the name of the package it is a
-# distribution for. This name can include the version number.
-#
-# For example, the distribution tar file of GCC version 1.40 unpacks
-# into a subdirectory named `gcc-1.40'.
-#
-# The easiest way to do this is to create a subdirectory
-# appropriately named, use ln or cp to install the proper files in
-# it, and then tar that subdirectory.
-#
-# The dist target should explicitly depend on all non-source files
-# that are in the distribution, to make sure they are up to date in
-# the distribution. See Making Releases.
-#
-# binary-dist is an FPtools addition for binary distributions
-#
# `check'
# Perform self-tests (if any). The user must build the program
# before running the tests, but need not install the program; you
# directories where files are installed, and their parent
# directories. There is a script called `mkinstalldirs' which is
# convenient for this; find it in the Texinfo package.
-# (FPTOOLS: we use a close relative of the suggested script, situated
+# (GHC: we use a close relative of the suggested script, situated
# in glafp-utils/mkdirhier -- SOF)
ifneq "$(HS_PROG)" ""
all :: $(HS_PROG)
-$(HS_PROG) :: $(HS_OBJS)
- $(HC) -o $@ $(HC_OPTS) $(LD_OPTS) $(HS_OBJS) $(LIBS)
+ifneq "$(BootingFromHc)" "YES"
+$(HS_PROG) :: $(OBJS)
+ $(HC) -o $@ $(HC_OPTS) $(LD_OPTS) $(OBJS)
+else
+# see bootstrap.mk
+$(HS_PROG) :: $(OBJS)
+ $(CC) -o $@ $(HC_BOOT_CC_OPTS) $(HC_BOOT_LD_OPTS) $(OBJS) $(HC_BOOT_LIBS)
+endif
endif
#----------------------------------------
$(CC) -o $@ $(CC_OPTS) $(LD_OPTS) $(C_OBJS) $(LIBS)
endif
-
#----------------------------------------
# Libraries/archives
+#
+# Build $(LIBRARY) from $(LIBOBJS)+$(STUBOBJS)
+#
+# Inputs:
+# $(LIBOBJS)
+# $(STUBOBJS)
+#
+# Outputs:
+# Rule to build $(LIBRARY)
ifneq "$(LIBRARY)" ""
all :: $(LIBRARY)
-
+ifneq "$(way)" "i"
define BUILD_LIB
$(RM) $@
$(AR) $(AR_OPTS) $@ $(STUBOBJS) $(LIBOBJS)
$(RANLIB) $@
endef
+else
+define BUILD_LIB
+$(RM) $@
+al -out:$@ $(STUBOBJS) $(LIBOBJS)
+endef
+endif
#
# For Haskell object files, we might have chosen to split
# whether HS_SRCS is empty or not.
#
+# can't split objs in way 'u', so we disable it here
+ifeq "$(way)" "u"
+SplitObjs = NO
+endif
+
ifneq "$(HS_SRCS)" ""
ifeq "$(SplitObjs)" "YES"
-# can't split objs in way 'u', so we disable it here
-ifneq "$(way)" "u"
-
SRC_HC_OPTS += -split-objs
+# We generate the archive into a temporary file libfoo.a.tmp, then
+# rename it at the end. This avoids the problem that ar may sometimes
+# fail, leaving a partially built archive behind.
+ifeq "$(ArSupportsInput)" ""
define BUILD_LIB
-$(RM) $@
-( echo $(STUBOBJS) ; $(FIND) $(patsubst %.$(way_)o,%,$(LIBOBJS)) -name '*.$(way_)o' -print ) | xargs ar q $@
+$(RM) $@ $@.tmp
+(echo $(STUBOBJS) $(C_OBJS) $(GC_C_OBJS); $(FIND) $(patsubst %.$(way_)o,%_split,$(HS_OBJS)) -name '*.$(way_)o' -print) | xargs $(AR) $@
$(RANLIB) $@
endef
+else
+define BUILD_LIB
+$(RM) $@ $@.tmp
+echo $(STUBOBJS) > $@.list
+echo $(C_OBJS) >> $@.list
+echo $(GC_C_OBJS) >> $@.list
+$(FIND) $(patsubst %.$(way_)o,%_split,$(HS_OBJS)) -name '*.$(way_)o' -print >> $@.list
+$(AR) $(AR_OPTS) $@ $(ArSupportsInput) $@.list
+$(RM) $@.list
+$(RANLIB) $@
+endef
+endif
# Extra stuff for compiling Haskell files with $(SplitObjs):
-HC_SPLIT_PRE= \
- $(RM) $@ ; if [ ! -d $(basename $@) ]; then mkdir $(basename $@); else \
- $(FIND) $(basename $@) -name '*.$(way_)o' -print | xargs $(RM) __rm_food ; fi
-HC_SPLIT_POST = touch $@
-
-SRC_HC_PRE_OPTS += $(HC_SPLIT_PRE) ;
-SRC_HC_POST_OPTS += $(HC_SPLIT_POST) ;
-
#
# If (Haskell) object files are split, cleaning up
# consist of descending into the directories where
#
extraclean ::
- $(FIND) $(patsubst %.$(way_)o,%,$(HS_OBJS)) -name '*.$(way_)o' -print | xargs $(RM) __rm_food
- -rmdir $(patsubst %.$(way_)o,%,$(HS_OBJS)) > /dev/null 2>&1
+ $(FIND) $(patsubst %.$(way_)o,%_split,$(HS_OBJS)) -name '*.$(way_)o' -print -o -name ld.script -print | xargs $(RM) __rm_food
+ -rmdir $(patsubst %.$(way_)o,%_split,$(HS_OBJS)) > /dev/null 2>&1
-endif # $(way) == u
endif # $(SplitObjs)
endif # $(HS_SRCS)
ifeq "$(StripLibraries)" "YES"
ifeq "$(SplitObjs)" "YES"
SRC_HC_POST_OPTS += \
- for i in $(basename $@)/*; do \
- ld -r -x -o $$i.tmp $$i; \
+ for i in $(basename $@)_split/*.$(way_)o; do \
+ $(LD) -r $(LD_X) -o $$i.tmp $$i; \
$(MV) $$i.tmp $$i; \
done
else
SRC_HC_POST_OPTS += \
- ld -r -x -o $@.tmp $@; $(MV) $@.tmp $@
-endif
-endif
-
-$(LIBRARY) :: $(STUBOBJS) $(LIBOBJS)
+ $(LD) -r $(LD_X) -o $@.tmp $@; $(MV) $@.tmp $@
+endif # SplitObjs
+endif # StripLibraries
+
+# Note: $(STUBOBJS) isn't depended on here, but included when building the lib.
+# (i.e., the assumption is that $(STUBOBJS) are created as a side-effect
+# of building $(LIBOBJS)).
+$(LIBRARY) : $(LIBOBJS)
$(BUILD_LIB)
-endif
+endif # LIBRARY = ""
#----------------------------------------
# Building Win32 DLLs
#
-ifeq "$(way)" "dll"
+
+ifeq "$(DLLized)" "YES"
+SRC_CC_OPTS += -DDLLized
+
+ifneq "$(PACKAGE)" ""
+
+SRC_BLD_DLL_OPTS += --export-all --output-def=HS$(PACKAGE)$(_cbits)$(_way).def DllVersionInfo.$(way_)o
+
+ifneq "$(PACKAGE) $(IS_CBITS_LIB)" "std YES"
+ifneq "$(PACKAGE)" "rts"
+SRC_BLD_DLL_OPTS += -lHSstd_cbits_imp -L$(GHC_LIB_DIR)/std/cbits
+SRC_BLD_DLL_OPTS += -lHSrts_$(way_)imp -L$(GHC_RTS_DIR)
+ifneq "$(PACKAGE)" "std"
+ ifeq "$(IS_CBITS_LIB)" ""
+ SRC_BLD_DLL_OPTS += -lHSstd_$(way_)imp -L$(GHC_LIB_DIR)/std
+ endif
+endif
+endif
+endif
+
+SRC_BLD_DLL_OPTS += -lgmp -L. -L$(GHC_RTS_DIR)/gmp
+ifeq "$(IS_CBITS_LIB)" ""
+SRC_BLD_DLL_OPTS += $(patsubst %,-lHS%_$(way_)imp, $(PACKAGE_DEPS))
+SRC_BLD_DLL_OPTS += $(patsubst %,-L../%, $(PACKAGE_DEPS))
+endif
+ifneq "$(HAS_CBITS)" ""
+SRC_BLD_DLL_OPTS += -lHS$(PACKAGE)_cbits_imp -Lcbits
+endif
+SRC_BLD_DLL_OPTS += -lwsock32 -lwinmm
+
+endif # PACKAGE != ""
+
+SplitObjs = NO
+
+ifneq "$(LIBRARY)" ""
+
+all :: DllVersionInfo.$(way_)o
ifeq "$(DLL_NAME)" ""
-DLL_NAME = $(patsubst %.a, %.dll, $(subst lib,,$(LIBRARY)))
+DLL_NAME = $(patsubst %.a,%.dll,$(subst lib,,$(LIBRARY)))
endif
ifneq "$(DLL_NAME)" ""
all :: $(DLL_NAME)
ifeq "$(DLL_IMPLIB_NAME)" ""
-DLL_IMPLIB_NAME = $(patsubst %.a, %_imp.a, $(LIBRARY))
+DLL_IMPLIB_NAME = $(patsubst %.a,%_imp.a,$(LIBRARY))
endif
$(DLL_NAME) :: $(LIBRARY)
$(BLD_DLL) --output-lib $(DLL_IMPLIB_NAME) -o $(DLL_NAME) $(LIBRARY) $(BLD_DLL_OPTS)
-endif
+endif # LIBRARY != ""
+
+endif # DLLized
#
# Version information is baked into a DLL by having the DLL include DllVersionInfo.o.
# (both are given sensible defaults though.)
#
# Note: this will not work as expected with Cygwin B20.1; you need a more recent
-# snapshot of binutils (to pick up windres bugfixes.)
+# version of binutils (to pick up windres bugfixes.)
ifndef DLL_VERSION
DLL_VERSION=$(ProjectVersion)
# Little bit of lo-fi mangling to get at the right set of settings depending
# on whether we're generating the VERSIONINFO for a DLL or EXE
#
-DLL_OR_EXE=$(subst VersionInfo.rc,,$@)
+DLL_OR_EXE=$(subst VersionInfo.$(way_)rc,,$@)
VERSION_FT=$(subst Dll, 0x2L, $(subst Exe, 0x1L, $(DLL_OR_EXE)))
VERSION_RES_NAME=$(subst Exe,$(EXE_VERSION_NAME), $(subst Dll, $(DLL_VERSION_NAME),$(DLL_OR_EXE)))
VERSION_RES=$(subst Exe,$(EXE_VERSION), $(subst Dll, $(DLL_VERSION),$(DLL_OR_EXE)))
VERSION_DESC=$(subst Exe,$(EXE_DESCRIPTION), $(subst Dll, $(DLL_DESCRIPTION),$(DLL_OR_EXE)))
-DllVersionInfo.rc ExeVersionInfo.rc:
- $(RM) DllVersionInfo.rc
+DllVersionInfo.$(way_)rc ExeVersionInfo.$(way_)rc:
+ $(RM) DllVersionInfo.$(way_)rc
echo "1 VERSIONINFO" > $@
echo "FILEVERSION 1,0,0,1" >> $@
echo "PRODUCTVERSION 1,0,0,1" >> $@
all :: $(SCRIPT_PROG)
-#
-# #! support under cygwin32 is not quite there yet,
-# so we rely on the eval `trick' instead. On all other
-# platforms, we prepend #!$(INTERP) -- SOF 6/97
-#
-
-$(SCRIPT_PROG) :: $(SCRIPT_OBJS)
+$(SCRIPT_PROG) : $(SCRIPT_OBJS)
$(RM) $@
@echo Creating $@...
ifeq "$(INTERP)" "perl"
ifneq "$(SCRIPT_PREFIX_FILES)" ""
@cat $(SCRIPT_PREFIX_FILES) >> $@
endif
+ifneq "$(SCRIPT_SUBST)" ""
@eval $(SCRIPT_SUBST)
+endif
@cat $(SCRIPT_OBJS) >> $@
@chmod a+x $@
@echo Done.
endif
-# links to script programs: we sometimes install a script as
-# <name>-<version> with a link from <name> to the real script.
+# ---------------------------------------------------------------------------
+# Symbolic links
+
+# links to programs: we sometimes install a program as
+# <name>-<version> with a link from <name> to the real program.
+
+ifneq "$(LINK)" ""
+
+all :: $(LINK)
-ifneq "$(SCRIPT_LINK)" ""
-all :: $(SCRIPT_LINK)
+CLEAN_FILES += $(LINK)
+
+ifeq "$(LINK_TARGET)" ""
+ifneq "$(SCRIPT_PROG)" ""
+LINK_TARGET = $(SCRIPT_PROG)
+else
+ifneq "$(HS_PROG)" ""
+LINK_TARGET = $(HS_PROG)
+else
+ifneq "$(C_PROG)" ""
+LINK_TARGET = $(C_PROG)
+else
+LINK_TARGET = dunno
+endif
+endif
+endif
+endif
#
-# Don't want to overwrite $(SCRIPT_LINK)s that aren't symbolic
+# Don't want to overwrite $(LINK)s that aren't symbolic
# links. Testing for symbolic links is problematic to do in
# a portable fashion using a /bin/sh test, so we simply rely
# on perl.
#
-$(SCRIPT_LINK) : $(SCRIPT_PROG)
- @if ( $(PERL) -e '$$fn="$(SCRIPT_LINK)"; exit ((! -f $$fn || -l $$fn) ? 0 : 1);' ); then \
- echo "Creating a symbolic link from $(SCRIPT_PROG) to $(SCRIPT_LINK)"; \
- $(RM) $(SCRIPT_LINK); \
- $(LN_S) $(SCRIPT_PROG) $(SCRIPT_LINK); \
+$(LINK) : $(LINK_TARGET)
+ @if ( $(PERL) -e '$$fn="$(LINK)"; exit ((! -f $$fn || -l $$fn) ? 0 : 1);' ); then \
+ echo "Creating a symbolic link from $(LINK_TARGET) to $(LINK)"; \
+ $(RM) $(LINK); \
+ $(LN_S) $(LINK_TARGET) $(LINK); \
else \
- echo "Creating a symbolic link from $(SCRIPT_PROG) to $(SCRIPT_LINK) failed: \`$(SCRIPT_LINK)' already exists"; \
- echo "Perhaps remove \`$(SCRIPT_LINK)' manually?"; \
+ echo "Creating a symbolic link from $(LINK_TARGET) to $(LINK) failed: \`$(LINK)' already exists"; \
+ echo "Perhaps remove \`$(LINK)' manually?"; \
+ exit 1; \
+ fi;
+
+
+#
+# install links to script drivers.
+#
+install ::
+ @$(INSTALL_DIR) $(bindir)
+ @if ( $(PERL) -e '$$fn="$(bindir)/$(LINK)"; exit ((! -f $$fn || -l $$fn) ? 0 : 1);' ); then \
+ echo "Creating a symbolic link from $(LINK_TARGET) to $(LINK) in $(bindir)"; \
+ $(RM) $(bindir)/$(LINK); \
+ $(LN_S) $(LINK_TARGET) $(bindir)/$(LINK); \
+ else \
+ echo "Creating a symbolic link from $(LINK_TARGET) to $(LINK) in $(bindir) failed: \`$(bindir)/$(LINK)' already exists"; \
+ echo "Perhaps remove \`$(bindir)/$(LINK)' manually?"; \
exit 1; \
fi;
-endif
+endif # LINK
###########################################
# INSTALL_LIB_SCRIPTS platform-dependent scripts in $(libdir)
# INSTALL_LIBEXECS platform-dependent execs in $(libdir)
# INSTALL_DATAS platform-independent files in $(datadir)
+# INSTALL_IFACES platform-dependent interface files in $(ifacedir)
#
# If the installation directory variable is undefined, the install rule simply
# emits a suitable error message.
# friends can be overridden from their original settings in mk/config.mk.in
# || mk/build.mk
#
-.PHONY: install installdirs install-strip install-dirs uninstall install-docs show-install
+.PHONY: install install-docs installdirs install-strip install-dirs uninstall install-docs show-install
show-install :
@echo "bindir = $(bindir)"
# within the various install targets instead.
#install:: install-dirs
-ifneq "$(INSTALL_PROGS)" ""
+#
+# Setting user/group ownership for the installed entities
+#
+ifneq "$(INSTALL_OWNER)" ""
+SRC_INSTALL_OPTS += -o $(INSTALL_OWNER)
+endif
+ifneq "$(INSTALL_GROUP)" ""
+SRC_INSTALL_OPTS += -g $(INSTALL_GROUP)
+endif
+
+
+ifneq "$(strip $(INSTALL_PROGS))" ""
#
# Here's an interesting one - when using the win32 version
# entry in the INSTALL_PROGS list. If there's no suffix, use
# $(exeext).
#
-# This is bit of a pain to express since GNU make doesn't have
-# something like $(if ...), but possible using $(subst ..)
-# [Aside: I added support for $(if ..) to my local copy of GNU
-# make at one stage, perhaps I should propagate the patch to
-# the GNU make maintainers..]
-#
-INSTALL_PROGS := $(foreach p, $(INSTALL_PROGS), $(addsuffix $(subst _,,$(subst __,$(exeext),_$(suffix $(p))_)), $(basename $(p))))
+INSTALL_PROGS := $(foreach p, $(INSTALL_PROGS), $(addsuffix $(if $(suffix $(p)),,$(exeext)), $(basename $(p))))
install:: $(INSTALL_PROGS)
@$(INSTALL_DIR) $(bindir)
@for i in $(INSTALL_PROGS); do \
echo $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(bindir); \
$(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(bindir) ; \
+ if test "$(darwin_TARGET_OS)" = "1"; then \
+ sh $(FPTOOLS_TOP)/mk/fix_install_names.sh $(libdir) $(bindir)/$$i ; \
+ fi ; \
done
endif
# Just like INSTALL_PROGS, but prefix with install sites bin/lib/data and
# install without stripping.
#
-ifneq "$(INSTALL_SCRIPTS)" ""
+ifneq "$(strip $(INSTALL_SCRIPTS))" ""
install:: $(INSTALL_SCRIPTS)
@$(INSTALL_DIR) $(bindir)
for i in $(INSTALL_SCRIPTS); do \
done
endif
-ifneq "$(INSTALL_LIB_SCRIPTS)" ""
+ifneq "$(strip $(INSTALL_LIB_SCRIPTS))" ""
install:: $(INSTALL_LIB_SCRIPTS)
@$(INSTALL_DIR) $(libdir)
for i in $(INSTALL_LIB_SCRIPTS); do \
done
endif
-ifneq "$(INSTALL_LIBEXEC_SCRIPTS)" ""
+ifneq "$(strip $(INSTALL_LIBEXEC_SCRIPTS))" ""
install:: $(INSTALL_LIBEXEC_SCRIPTS)
@$(INSTALL_DIR) $(libexecdir)
for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
done
endif
-ifneq "$(INSTALL_LIBS)" ""
+ifneq "$(strip $(INSTALL_LIBS))" ""
install:: $(INSTALL_LIBS)
@$(INSTALL_DIR) $(libdir)
for i in $(INSTALL_LIBS); do \
$(RANLIB) $(libdir)/`basename $$i` ;; \
*.dll) \
$(INSTALL_DATA) -s $(INSTALL_OPTS) $$i $(libdir) ;; \
+ *.so) \
+ $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $(libdir) ;; \
+ *.dylib) \
+ $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $(libdir); \
+ install_name_tool -id $(libdir)/`basename $$i` $(libdir)/`basename $$i` ;; \
*) \
$(INSTALL_DATA) $(INSTALL_OPTS) $$i $(libdir); \
esac; \
done
endif
-ifneq "$(INSTALL_LIBEXECS)" ""
+ifneq "$(strip $(INSTALL_LIBEXECS))" ""
#
# See above comment next to defn of INSTALL_PROGS for what
# the purpose of this one-liner is.
@$(INSTALL_DIR) $(libexecdir)
-for i in $(INSTALL_LIBEXECS); do \
$(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(libexecdir); \
+ if test "$(darwin_TARGET_OS)" = "1"; then \
+ sh $(FPTOOLS_TOP)/mk/fix_install_names.sh $(libdir) $(libexecdir)/`basename $$i` ; \
+ fi ; \
done
endif
-ifneq "$(INSTALL_DATAS)" ""
+ifneq "$(strip $(INSTALL_DATAS))" ""
install:: $(INSTALL_DATAS)
@$(INSTALL_DIR) $(datadir)
for i in $(INSTALL_DATAS); do \
done
endif
-ifneq "$(INSTALL_INCLUDES)" ""
+ifneq "$(strip $(INSTALL_IFACES))" ""
+install:: $(INSTALL_IFACES)
+ @$(INSTALL_DIR) $(ifacedir)
+ for i in $(INSTALL_IFACES); do \
+ $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(ifacedir); \
+ done
+endif
+
+ifneq "$(strip $(INSTALL_IFACES_WITH_DIRS))" ""
+install:: $(INSTALL_IFACES_WITH_DIRS)
+ @$(INSTALL_DIR) $(ifacedir)
+ for i in $(INSTALL_IFACES_WITH_DIRS); do \
+ $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(ifacedir)/`dirname $$i`; \
+ done
+endif
+
+ifneq "$(strip $(INSTALL_INCLUDES))" ""
install:: $(INSTALL_INCLUDES)
@$(INSTALL_DIR) $(includedir)
for i in $(INSTALL_INCLUDES); do \
done
endif
+ifneq "$(strip $(INSTALL_DOCS))" ""
+ifneq "$(XMLDocWays)" ""
+install-docs:: $(INSTALL_DOCS)
+ @$(INSTALL_DIR) $(datadir)
+ for i in $(INSTALL_DOCS); do \
+ $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(datadir); \
+ done
+endif
+endif
+
+# TODO: The following could be an entry for an Obfuscated Makefile Contest...
+ifneq "$(strip $(INSTALL_XML_DOC))" ""
+ifneq "$(XMLDocWays)" ""
+install-docs:: $(foreach i,$(XMLDocWays),$(INSTALL_XML_DOC)$(patsubst %.html-no-chunks,%.html,$(patsubst %.html,%/index.html,.$(i))))
+ @$(INSTALL_DIR) $(datadir)
+ @for i in $(XMLDocWays); do \
+ if [ $$i = "html" ]; then \
+ $(INSTALL_DIR) $(datadir)/html; \
+ $(INSTALL_DIR) $(datadir)/html/$(INSTALL_XML_DOC); \
+ echo "( cd $(INSTALL_XML_DOC) && $(CP) * $(datadir)/html/$(INSTALL_XML_DOC) )" ; \
+ ( cd $(INSTALL_XML_DOC) && $(CP) * $(datadir)/html/$(INSTALL_XML_DOC) ) ; \
+ else \
+ $(INSTALL_DIR) $(datadir)/doc; \
+ echo $(INSTALL_DATA) $(INSTALL_OPTS) $(INSTALL_XML_DOC)`echo .$$i | sed s/\.html-no-chunks/.html/` $(datadir)/doc; \
+ $(INSTALL_DATA) $(INSTALL_OPTS) $(INSTALL_XML_DOC)`echo .$$i | sed s/\.html-no-chunks/.html/` $(datadir)/doc; \
+ fi; \
+ if [ $$i = "html-no-chunks" ]; then \
+ echo $(CP) $(FPTOOLS_CSS_ABS) $(datadir)/doc; \
+ $(CP) $(FPTOOLS_CSS_ABS) $(datadir)/doc; \
+ fi \
+ done
+endif
+endif
+
#
# Use with care..
#
@$(MAKE) EXTRA_INSTALL_OPTS='-s' install
endif
-#
-# install links to script drivers.
-#
-ifneq "$(SCRIPT_LINK)" ""
-install ::
- @if ( $(PERL) -e '$$fn="$(bindir)/$(SCRIPT_LINK)"; exit ((! -f $$fn || -l $$fn) ? 0 : 1);' ); then \
- echo "Creating a symbol link from $(SCRIPT_PROG) to $(SCRIPT_LINK) in $(bindir)"; \
- $(RM) $(bindir)/$(SCRIPT_LINK); \
- $(LN_S) $(SCRIPT_PROG) $(bindir)/$(SCRIPT_LINK); \
- else \
- echo "Creating a symbol link from $(SCRIPT_PROG) to $(SCRIPT_LINK) in $(bindir) failed: \`$(bindir)/$(SCRIPT_LINK)' already exists"; \
- echo "Perhaps remove \`$(bindir)/$(SCRIPT_LINK)' manually?"; \
- exit 1; \
- fi;
-
-endif
-
-###########################################
-#
-# Targets: dist binary-dist
-#
-###########################################
-
-
-#
-# dist-pre is a canned rule the toplevel of your source tree
-# would use as follows,
-#
-# dist :: dist-pre
-#
-# it performs two tasks, first creating the distribution directory
-# tree and it then decorates the new tree with symbolic links pointing
-# to the symbolic links in the build tree.
-#
-# The dist-pre relies on (at least) the `find' in GNU findutils
-# (only tested with version 4.1). All non-GNU `find's I have
-# laid on my hands locally, has a restrictive treatment of {} in
-# -exec commands, i.e.,
-#
-# find . -print echo a{} \;
-#
-# does not expand the {}, it has to be a separate argument (i.e. `a {}').
-# GNU find is (IMHO) more sensible here, expanding any {} it comes across
-# inside an -exec, whether it is a separate arg or part of a word:
-#
-# $ touch yes
-# $ find --version
-# GNU find version 4.1
-# $ find yes -exec echo oh,{}! \;
-# oh,yes!
-#
-# Of course, the above is not impossible to achieve with other finds,
-# just that GNU find does the Patently Right Thing here :)
-#
-# ====> if you're using these dist rules, get hold of GNU findutils.
-#
-# --SOF 2/97
-#
-.PHONY: dist dist-pre dist-post
-
-#
-# The dist rules leaves out CVS, SRC (from mkshadowdir) and tests
-# directories when creating shadow source distrib tree
-#
-dist-pre::
- -rm -rf $(SRC_DIST_DIR)
- -rm -f $(SRC_DIST_NAME).tar.gz
- (cd $(FPTOOLS_TOP_ABS); $(FIND) $(SRC_DIST_DIRS) -type d \( -name CVS -prune -o -name SRC -prune -o -name tests -prune -o -exec $(MKDIRHIER) $(SRC_DIST_DIR)/{} \; \) ; )
- (cd $(FPTOOLS_TOP_ABS); $(FIND) $(SRC_DIST_DIRS) -name CVS -prune -o -name SRC -prune -o -name tests -prune -o -name "*~" -prune -o -name ".cvsignore" -prune -o -name "\#*" -prune -o -name ".\#*" -prune -o -type l -exec $(LN_S) $(FPTOOLS_TOP_ABS)/{} $(SRC_DIST_DIR)/{} \; )
-
-#
-# After having created a shadow distribution tree and copied/linked
-# all the necessary files to it, `dist-post' makes sure the permissions
-# are set right and then package up the tree. Empty directories are also removed.
-#
-# For now, we make the packaging a separate rule, so as to allow
-# the inspection of the dist tree before eventually packaging it up.
-#
-dist-post::
- @echo Deleting the following empty directories..
- ( cd $(SRC_DIST_DIR) ; cd .. ; $(FIND) $(SRC_DIST_NAME) -type d -exec sh -c 'test x`ls $$0 | wc -l | sed -e "s/ //g"` = x0' {} \; -print -exec rm -rf {} \; -prune )
- ( cd $(SRC_DIST_DIR) ; cd .. ; chmod -R a+rw $(SRC_DIST_NAME) )
-
-# Automatic generation of a MANIFEST file for a source distribution
-# tree that is ready to go.
-dist-manifest ::
- cd $(SRC_DIST_DIR); $(FIND) . \( -type l -o -type f \) -exec ls -lLG {} \; | sed -e 's/\.\///' > /tmp/MANIFEST ; mv /tmp/MANIFEST MANIFEST
-
-dist-package:: dist-package-tar-gz
-
-dist-package-tar-gz ::
- cd $(SRC_DIST_DIR); cd ..; $(TAR) chzf $(SRC_DIST_NAME).tar.gz $(SRC_DIST_NAME)
-
-dist-package-zip ::
- cd $(SRC_DIST_DIR); cd ..; $(ZIP) $(ZIP_OPTS) -r $(SRC_DIST_NAME).zip $(SRC_DIST_NAME)
-
-###########################################
+##############################################################################
#
# Targets: check tags show
#
-###########################################
+##############################################################################
#------------------------------------------------------------
# Check
@$(RM) TAGS
@touch TAGS
ifneq "$(TAGS_HS_SRCS)" ""
- $(HSTAGS) $(HSTAGS_OPTS) -- $(TAGS_HS_SRCS)
+ $(HSTAGS) $(HSTAGS_OPTS) $(TAGS_HS_SRCS)
endif
ifneq "$(TAGS_C_SRCS)" ""
etags -a $(TAGS_C_SRCS)
#
show:
- @echo '$(VALUE)=$($(VALUE))'
+ @echo '$(VALUE)="$($(VALUE))"'
-#--------------------------------------------------------------------------
-# SGML Documentation
+################################################################################
+#
+# DocBook XML Documentation
#
-.PHONY: dvi ps html pdf rtf
+################################################################################
-ifneq "$(SGML_DOC)" ""
+.PHONY: html html-no-chunks chm HxS fo dvi ps pdf
-# multi-file SGML document: main document name is specified in $(SGML_DOC),
-# sub-documents (.sgml files) listed in $(SGML_SRCS).
+ifneq "$(XML_DOC)" ""
-ifeq "$(VSGML_SRCS)" ""
-VSGML_SRCS = $(wildcard *.vsgml)
-endif
+all :: $(XMLDocWays)
-ifeq "$(SGML_SRCS)" ""
-ifneq "$(VSGML_SRCS)" ""
-SGML_SRCS = $(patsubst %.vsgml, %.sgml, $(VSGML_SRCS))
-else
-SGML_SRCS = $(wildcard *.sgml)
-endif
+# multi-file XML document: main document name is specified in $(XML_DOC),
+# sub-documents (.xml files) listed in $(XML_SRCS).
+
+ifeq "$(XML_SRCS)" ""
+XML_SRCS = $(wildcard *.xml)
endif
-SGML_TEX = $(addsuffix .tex,$(SGML_DOC))
-SGML_DVI = $(addsuffix .dvi,$(SGML_DOC))
-SGML_PS = $(addsuffix .ps,$(SGML_DOC))
-SGML_PDF = $(addsuffix .pdf,$(SGML_DOC))
-SGML_RTF = $(addsuffix .rtf,$(SGML_DOC))
-SGML_HTML = $(addsuffix .html,$(SGML_DOC))
-# HTML output goes in a subdirectory on its own.
-SGML_TEXT = $(addsuffix .txt,$(SGML_DOC))
+XML_HTML = $(addsuffix /index.html,$(basename $(XML_DOC)))
+XML_HTML_NO_CHUNKS = $(addsuffix .html,$(XML_DOC))
+XML_CHM = $(addsuffix .chm,$(XML_DOC))
+XML_HxS = $(addsuffix .HxS,$(XML_DOC))
+XML_FO = $(addsuffix .fo,$(XML_DOC))
+XML_DVI = $(addsuffix .dvi,$(XML_DOC))
+XML_PS = $(addsuffix .ps,$(XML_DOC))
+XML_PDF = $(addsuffix .pdf,$(XML_DOC))
-$(SGML_DVI) $(SGML_PS) $(SGML_HTML) $(SGML_TEXT) :: $(SGML_SRCS)
+$(XML_HTML) $(XML_NO_CHUNKS_HTML) $(XML_FO) $(XML_DVI) $(XML_PS) $(XML_PDF) :: $(XML_SRCS)
-dvi :: $(SGML_DVI)
-ps :: $(SGML_PS)
-pdf :: $(SGML_PDF)
-rtf :: $(SGML_RTF)
-html :: $(SGML_HTML)
-txt :: $(SGML_TEXT)
+html :: $(XML_HTML)
+html-no-chunks :: $(XML_HTML_NO_CHUNKS)
+chm :: $(XML_CHM)
+HxS :: $(XML_HxS)
+fo :: $(XML_FO)
+dvi :: $(XML_DVI)
+ps :: $(XML_PS)
+pdf :: $(XML_PDF)
-CLEAN_FILES += $(SGML_TEXT) $(SGML_TEX) $(SGML_PS) $(SGML_DVI) $(SGML_PDF) $(SGML_RTF) $(SGML_HTML) $(SGML_DOC)-*.html
-# can't use $(SGML_SRCS) here, it was maybe used elsewhere
-MOSTLY_CLEAN_FILES += $(patsubst %.vsgml, %.sgml, $(VSGML_SRCS))
+CLEAN_FILES += $(XML_HTML_NO_CHUNKS) $(XML_FO) $(XML_DVI) $(XML_PS) $(XML_PDF)
extraclean ::
- $(RM) -rf $(SGML_DOC)
+ $(RM) -rf $(XML_DOC).out $(FPTOOLS_CSS) $(basename $(XML_DOC)) $(basename $(XML_DOC))-htmlhelp
+validate ::
+ $(XMLLINT) --valid --noout $(XMLLINT_OPTS) $(XML_DOC).xml
endif
-###########################################
+##############################################################################
#
# Targets: clean
#
-###########################################
+##############################################################################
# we have to be careful about recursion here; since all the clean
# targets are recursive, we don't want to make eg. distclean depend on
@echo 'deletes files that may need special tools to rebuild.'
rm -f $(MOSTLY_CLEAN_FILES) $(CLEAN_FILES) $(DIST_CLEAN_FILES) $(MAINTAINER_CLEAN_FILES)
-#################################################################################
+################################################################################
#
# Way management
#
-#################################################################################
+################################################################################
# Here is the ingenious jiggery pokery that allows you to build multiple versions
# of a program in a single build tree.
# Expects: $(WAYS) the possible "way" strings to one of
# which $(way) will be set
+ifneq "$(way)" ""
+ifeq "$(findstring $(way), $(WAYS))" ""
+$(error Unknown way $(way))
+endif
+endif
# So how does $(way) ever get set to anything? Answer, we recursively
# invoke make, setting $(way) on the command line.
endif # if way
-ifneq "$(WAYS)" ""
+# -------------------------------------------------------------------------
+# Object and interface files have suffixes tagged with their ways
+
+ifneq "$(way)" ""
+SRC_HC_OPTS += -hisuf $(way_)hi -hcsuf $(way_)hc -osuf $(way_)o
+endif
+
+# -------------------------------------------------------------------------
+# Rules to invoke the current target recursively for each way
+
+ifneq "$(strip $(WAYS))" ""
ifeq "$(way)" ""
# NB: the targets exclude
# since these are way-independent
all docs TAGS clean distclean mostlyclean maintainer-clean install ::
@echo "------------------------------------------------------------------------"
- @echo "===fptools== Recursively making \`$@' for ways: $(WAYS) ..."
+ @echo "== Recursively making \`$@' for ways: $(WAYS) ..."
@echo "PWD = $(shell pwd)"
@echo "------------------------------------------------------------------------"
# Don't rely on -e working, instead we check exit return codes from sub-makes.
- @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
+ case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
for i in $(WAYS) ; do \
echo "------------------------------------------------------------------------"; \
- echo "==fptools== $(MAKE) way=$$i $@;"; \
+ echo "== $(MAKE) way=$$i $@;"; \
echo "PWD = $(shell pwd)"; \
echo "------------------------------------------------------------------------"; \
$(MAKE) way=$$i --no-print-directory $(MFLAGS) $@ ; \
if [ $$? -eq 0 ] ; then true; else exit $$x_on_err; fi; \
done
@echo "------------------------------------------------------------------------"
- @echo "===fptools== Finished recursively making \`$@' for ways: $(WAYS) ..."
+ @echo "== Finished recursively making \`$@' for ways: $(WAYS) ..."
+ @echo "PWD = $(shell pwd)"
+ @echo "------------------------------------------------------------------------"
+
+endif
+endif
+
+
+##################################################################
+#
+# Recursive stuff
+#
+# This was once at the top of the file, allegedly because it was
+# needed for some targets, e.g. when building DLLs in libraries. But
+# since this reason is a little short on information, and I'm having
+# trouble with subdirectory builds happening before the current
+# directory when building hslibs (bad interaction with including
+# _hsc.o files in the cbits lib) so I'm moving the recursive makes to
+# the end --SDM 12/12/2001
+#
+##################################################################
+
+# Here are the diabolically clever rules that
+#
+# (a) for each "recursive target" <t>
+# propagates "make <t>" to directories in SUBDIRS
+#
+# (b) when SUBDIRS is empty,
+# for each "multi-way-target" <t>
+# calls "make way=w <t>" for each w in $(WAYS)
+#
+# This has the effect of making the standard target
+# in each of the specified ways (as well as in the normal way
+
+# Controlling variables
+# WAYS = extra (beyond the normal way) ways to build things in
+# SUBDIRS = subdirectories to recurse into
+
+# No ways, so iterate over the SUBDIRS
+
+# note about recursively invoking make: we'd like make to drop all the
+# way back to the top level if it fails in any of the
+# sub(sub-...)directories. This is done by setting the -e flag to the
+# shell during the loop, which causes an immediate failure if any of
+# the shell commands fail.
+
+# One exception: if the user gave the -i or -k flag to make in the
+# first place, we'd like to reverse this behaviour. So we check for
+# these flags, and set the -e flag appropriately. NOTE: watch out for
+# the --no-print-directory flag which is passed to recursive
+# invocations of make.
+#
+ifeq "$(way)" ""
+ifneq "$(SUBDIRS)" ""
+
+# we override the 'boot', 'all' and 'install' targets in the top
+# level Makefile. Some of the sub-projects also set 'boot' to empty.
+
+ifeq "$(NO_ALL_TARGET)" "YES"
+ALL_TARGET =
+else
+ALL_TARGET = all
+endif
+
+ifeq "$(NO_BOOT_TARGET)" "YES"
+BOOT_TARGET =
+else
+BOOT_TARGET = boot
+endif
+
+ifeq "$(NO_INSTALL_TARGET)" "YES"
+INSTALL_TARGET =
+INSTALL_DOCS_TARGET =
+else
+INSTALL_TARGET = install
+INSTALL_DOCS_TARGET = install-docs
+endif
+
+$(ALL_TARGET) docs runtests $(BOOT_TARGET) TAGS clean distclean mostlyclean maintainer-clean $(INSTALL_TARGET) $(INSTALL_DOCS_TARGET) html chm HxS ps dvi txt::
+ @echo "------------------------------------------------------------------------"
+ @echo "== Recursively making \`$@' in $(SUBDIRS) ..."
+ @echo "PWD = $(shell pwd)"
+ @echo "------------------------------------------------------------------------"
+# Don't rely on -e working, instead we check exit return codes from sub-makes.
+ @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
+ for i in $(SUBDIRS); do \
+ echo "------------------------------------------------------------------------"; \
+ echo "== $(MAKE) $@ $(MFLAGS);"; \
+ echo " in $(shell pwd)/$$i"; \
+ echo "------------------------------------------------------------------------"; \
+ $(MAKE) --no-print-directory -C $$i $(MFLAGS) $@; \
+ if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
+ done
+ @echo "------------------------------------------------------------------------"
+ @echo "== Finished making \`$@' in $(SUBDIRS) ..."
@echo "PWD = $(shell pwd)"
@echo "------------------------------------------------------------------------"
endif
endif
+
+#
+# Selectively building subdirectories.
+#
+#
+ifneq "$(SUBDIRS)" ""
+$(SUBDIRS) ::
+ $(MAKE) -C $@ $(MFLAGS)
+endif
+
+# -----------------------------------------------------------------------------
+# Further cleaning
+
+# Sometimes we want to clean things only after the recursve cleaning
+# has heppened (eg. if the files we're about to remove would affect
+# the recursive traversal).
+
+distclean::
+ rm -f $(LATE_DIST_CLEAN_FILES)
+
+maintainer-clean::
+ rm -f $(LATE_DIST_CLEAN_FILES)
+