X-Git-Url: http://git.megacz.com/?a=blobdiff_plain;f=Makefile;h=de5ee8a6514c3cb2441c36cf7fa7e710d78b9567;hb=2662dbc5b2c30fc11ccb99e7f9b2dba794d680ba;hp=c1ff5a7f23788d3f98120496758db546212aee7a;hpb=0065d5ab628975892cea1ec7303f968c3338cbe1;p=ghc-hetmet.git diff --git a/Makefile b/Makefile index c1ff5a7..de5ee8a 100644 --- a/Makefile +++ b/Makefile @@ -1,523 +1,121 @@ -############################################################################ -# -# This is the top-level Makefile for GHC -# -# Targets: -# -# bootsrap (DEFAULT) -# Builds GHC, then builds the libraries, -# then uses this GHC ("stage 1") to build itself -# ("stage 2"). -# -# bootstrap2 -# Same as bootstrap -# -# bootstrap3 -# bootstrap2 + we build GHC one more time ("stage 3") -# -# stage1 -# Just build up to stage 1 -# -# stage2 -# Just build stage 2 (stage 1 must be built) -# -# stage3 -# Just build stage 3 (stage 2 must be built) -# -# all -# Same as bootstrap -# -# install -# Install everything, including stage 2 compiler by default -# (override with stage=3, for example). -# -# dist -# Make a source dist (WARNING: runs 'make distclean' first) -# -# binary-dist -# Builds a binary distribution -# -# hc-file-bundle -# Builds an HC-file bundle, for bootstrapping -# -# clean, distclean, maintainer-clean -# Increasing levels of cleanliness +# ----------------------------------------------------------------------------- # -############################################################################ - -TOP=. -include $(TOP)/mk/boilerplate.mk - +# (c) 2009 The University of Glasgow # -# Order is important! It's e.g. necessary to descend into include/ -# before the rest to have a config.h, etc. +# This file is part of the GHC build system. # -# If we're booting from .hc files, swap the order -# we descend into subdirs - to boot utils must be before driver. +# To understand how the build system works and how to modify it, see +# http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture +# http://hackage.haskell.org/trac/ghc/wiki/Building/Modifying # -.PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3 - -# We can't 'make boot' in libraries until stage1 is built -ifeq "$(BootingFromHc)" "YES" -SUBDIRS_NOLIB = includes rts docs compiler compat utils driver -else -SUBDIRS_NOLIB = includes compat utils driver docs compiler rts -endif - -SUBDIRS = $(SUBDIRS_NOLIB) libraries - -stage1 : - $(MAKE) -C utils/mkdependC boot - @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \ - for i in $(SUBDIRS_NOLIB); do \ - echo "------------------------------------------------------------------------"; \ - echo "== $(MAKE) boot $(MFLAGS);"; \ - echo " in $(shell pwd)/$$i"; \ - echo "------------------------------------------------------------------------"; \ - $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \ - if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ - done; \ - for i in $(SUBDIRS_NOLIB); do \ - echo "------------------------------------------------------------------------"; \ - echo "== $(MAKE) all $(MFLAGS);"; \ - echo " in $(shell pwd)/$$i"; \ - echo "------------------------------------------------------------------------"; \ - $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \ - if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ - done - @$(MAKE) -C libraries boot - @$(MAKE) -C libraries all +# ----------------------------------------------------------------------------- -stage2 : - $(MAKE) -C compiler boot stage=2 - $(MAKE) -C compiler stage=2 +ifeq "$(wildcard distrib/)" "" -stage3 : - $(MAKE) -C compiler boot stage=3 - $(MAKE) -C compiler stage=3 +# We're in a bindist -bootstrap : bootstrap2 +.PHONY: default +default: + @echo 'Run "make install" to install' + @false -bootstrap2 : stage1 - $(MAKE) stage2 +.PHONY: install show +install show: + $(MAKE) -r --no-print-directory -f ghc.mk $@ BINDIST=YES NO_INCLUDE_DEPS=YES -bootstrap3 : bootstrap2 - $(MAKE) stage3 +else -all :: bootstrap +default : all + @: -# ----------------------------------------------------------------------------- -# Installing +# For help, type 'make help' +.PHONY: help +help : + @cat MAKEHELP -# We want to install the stage 2 bootstrapped compiler by default, but we let -# the user override this by saying 'make install stage=1', for example. -ifeq "$(stage)" "" -INSTALL_STAGE = stage=2 +ifneq "$(findstring clean,$(MAKECMDGOALS))" "" +-include mk/config.mk else -INSTALL_STAGE = +include mk/config.mk +ifeq "$(ProjectVersion)" "" +$(error Please run ./configure first) endif - -# Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too -install :: - @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \ - for i in $(SUBDIRS); do \ - echo "------------------------------------------------------------------------"; \ - echo "== $(MAKE) $@ $(MFLAGS);"; \ - echo " in $(shell pwd)/$$i"; \ - echo "------------------------------------------------------------------------"; \ - $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \ - if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ - done - -ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" -# These files need to be in the InstallShield -# INSTALL_DATAS rather than INSTALL_DOCS is used so these files go -# in the top-level directory of the distribution -INSTALL_DATAS += ANNOUNCE LICENSE README VERSION endif -# If installing on Windows with MinGW32, copy the gcc compiler, headers and libs -# and the perl interpreter and dll into the GHC prefix directory. -# Gcc and Perl source locations derived from configuration data. -ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" -ifneq "$(WhatGccIsCalled)" "" -install :: - -mkdir $(prefix)/gcc-lib - -mkdir $(prefix)/include - -mkdir $(prefix)/include/mingw - -cp -rp $(GccDir)../include/* $(prefix)/include/mingw - -cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib - -cp $(GccDir)../lib/*.* $(prefix)/gcc-lib - -cp $(GccDir)gcc.exe $(prefix) - -cp $(GccDir)as.exe $(prefix)/gcc-lib - -cp $(GccDir)ld.exe $(prefix)/gcc-lib - -cp $(GccDir)dllwrap.exe $(prefix)/gcc-lib - -cp $(GccDir)dlltool.exe $(prefix)/gcc-lib - -cp $(GhcDir)../perl.exe $(prefix) - -cp $(GhcDir)../perl56.dll $(prefix) +include mk/custom-settings.mk + +# No need to update makefiles for these targets: +REALGOALS=$(filter-out binary-dist binary-dist-prep bootstrapping-files framework-pkg clean clean_% distclean maintainer-clean show help install-docs,$(MAKECMDGOALS)) + +# configure touches certain files even if they haven't changed. This +# can mean a lot of unnecessary recompilation after a re-configure, so +# here we cache the old versions of these files so we can restore the +# timestamps. +%.old: % + @set -x && test -f $@ && cmp -s $< $@ || cp -p $< $@ + touch -r $@ $< + + +# NB. not the same as saying '%: ...', which doesn't do the right thing: +# it does nothing if we specify a target that already exists. +.PHONY: $(REALGOALS) +$(REALGOALS) all: mk/config.mk.old mk/project.mk.old compiler/ghc.cabal.old + @echo "===--- updating makefiles phase 0" + $(MAKE) -r --no-print-directory -f ghc.mk phase=0 just-makefiles +ifneq "$(OMIT_PHASE_1)" "YES" + @echo "===--- updating makefiles phase 1" + $(MAKE) -r --no-print-directory -f ghc.mk phase=1 just-makefiles endif +ifneq "$(OMIT_PHASE_2)" "YES" + @echo "===--- updating makefiles phase 2" + $(MAKE) -r --no-print-directory -f ghc.mk phase=2 just-makefiles endif - -install-docs :: - @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \ - for i in $(SUBDIRS); do \ - echo "------------------------------------------------------------------------"; \ - echo "== $(MAKE) $@ $(MFLAGS);"; \ - echo " in $(shell pwd)/$$i"; \ - echo "------------------------------------------------------------------------"; \ - $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \ - if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ - done - -# ----------------------------------------------------------------------------- -# Making a binary distribution -# -# To make a particular binary distribution: -# set $(Project) to the name of the project, capitalised (eg. Ghc or Happy). - -# `dist' `binary-dist' -# Create a distribution tar file for this program. The tar file -# should be set up so that the file names in the tar file start with -# a subdirectory name which is the name of the package it is a -# distribution for. This name can include the version number. -# -# For example, the distribution tar file of GCC version 1.40 unpacks -# into a subdirectory named `gcc-1.40'. -# -# The easiest way to do this is to create a subdirectory -# appropriately named, use ln or cp to install the proper files in -# it, and then tar that subdirectory. -# -# The dist target should explicitly depend on all non-source files -# that are in the distribution, to make sure they are up to date in -# the distribution. See Making Releases. -# -# binary-dist is an FPtools addition for binary distributions -# - -ifneq "$(TARGETPLATFORM)" "i386-unknown-mingw32" -GhcBinDistShScripts = ghc-$(ProjectVersion) ghci-$(ProjectVersion) ghc-pkg-$(ProjectVersion) hsc2hs -else -GhcBinDistShScripts = +ifneq "$(OMIT_PHASE_3)" "YES" + @echo "===--- updating makefiles phase 3" + $(MAKE) -r --no-print-directory -f ghc.mk phase=3 just-makefiles endif + @echo "===--- finished updating makefiles" + $(MAKE) -r --no-print-directory -f ghc.mk $@ -GhcBinDistPrlScripts = ghcprof -GhcBinDistLibPrlScripts = ghc-asm ghc-split -GhcBinDistBins = hp2ps runghc -GhcBinDistOptBins = runhaskell -GhcBinDistLinks = ghc ghci ghc-pkg -GhcBinDistLibSplicedFiles = package.conf - -BIN_DIST_TMPDIR=$(FPTOOLS_TOP_ABS) -BIN_DIST_NAME=$(ProjectNameShort)-$(ProjectVersion) - -# -# list of toplevel directories to include in binary distrib. -# -BIN_DIST_MAIN_DIR=$($(Project)MainDir) -BIN_DIST_DIRS=$($(Project)BinDistDirs) - -binary-dist:: binary-dist-pre - -BIN_DIST_TOP= distrib/Makefile-bin.in \ - distrib/configure-bin.ac \ - distrib/INSTALL \ - $(BIN_DIST_MAIN_DIR)/ANNOUNCE \ - $(BIN_DIST_MAIN_DIR)/VERSION \ - $(BIN_DIST_MAIN_DIR)/LICENSE \ - $(BIN_DIST_MAIN_DIR)/README \ - glafp-utils/mkdirhier/mkdirhier \ - install-sh \ - config.guess \ - config.sub \ - aclocal.m4 - -ifeq "$(darwin_TARGET_OS)" "1" -BIN_DIST_TOP+=mk/fix_install_names.sh -endif - -# -# binary-dist creates a binary bundle, set BIN_DIST_NAME -# to package name and do `make binary-dist Project=' -# (normally this just a thing you would do from the toplevel of fptools) -# -.PHONY: binary-dist-pre binary-dist binary-pack - -BIN_DIST_NAME=$(ProjectNameShort)-$(ProjectVersion) -BIN_DIST_TMPDIR=$(FPTOOLS_TOP_ABS) - -binary-dist-pre:: -ifeq "$(BIN_DIST)" "" - @echo "WARNING: To run the binary-dist target, you need to set BIN_DIST=1 in your build.mk" && exit 1 +binary-dist: binary-dist-prep +ifeq "$(mingw32_TARGET_OS)" "1" + mv bindistprep/*.exe . endif - -rm -rf $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) - -$(RM) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME).tar.gz - -echo "BIN_DIST_DIRS = $(BIN_DIST_DIRS)" - @for i in $(BIN_DIST_DIRS); do \ - if test -d "$$i"; then \ - echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM); \ - $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM); \ - echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM); \ - $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM); \ - echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \ - $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \ - echo $(MAKE) -C $$i $(MFLAGS) $(INSTALL_STAGE) install \ - prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \ - libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \ - $(MAKE) -C $$i $(MFLAGS) $(INSTALL_STAGE) install \ - prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \ - libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \ - fi; \ - done + mv bindistprep/*.tar.bz2 . -binary-dist:: - @for i in $(BIN_DIST_TOP); do \ - if test -f "$$i"; then \ - echo cp $$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME); \ - cp $$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME); \ - fi; \ - done; - @echo "Configuring the Makefile for this project..." - touch $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "package = $(ProjectNameShort)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "version = $(ProjectVersion)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "PACKAGE_SH_SCRIPTS = $($(Project)BinDistShScripts)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "PACKAGE_PRL_SCRIPTS = $($(Project)BinDistPrlScripts)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "PACKAGE_LIB_PRL_SCRIPTS = $($(Project)BinDistLibPrlScripts)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "PACKAGE_LIB_SPLICED_FILES = $($(Project)BinDistLibSplicedFiles)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "PACKAGE_BINS = $($(Project)BinDistBins)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "PACKAGE_OPT_BINS = $($(Project)BinDistOptBins)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "PACKAGE_LINKS = $($(Project)BinDistLinks)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - cat $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile-bin.in >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - @echo "Generating a shippable configure script.." - $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/configure-bin.ac $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/configure.ac - ( cd $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME); autoconf ) - if test -x $(BIN_DIST_MAIN_DIR)/mk/post-install-script ; then \ - cp $(BIN_DIST_MAIN_DIR)/mk/post-install-script \ - $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) ; \ - fi - if test -x $(BIN_DIST_MAIN_DIR)/mk/post-inplace-script ; then \ - cp $(BIN_DIST_MAIN_DIR)/mk/post-inplace-script \ - $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) ; \ - fi -# -# binary dist'ing the documentation. -# The default documentation to build/install is given below; overrideable -# via build.mk or the 'make' command-line. - -ifndef BINDIST_DOC_WAYS - -ifneq "$(XSLTPROC)" "" -BINDIST_DOC_WAYS = html -ifneq "$(FOP)" "" -BINDIST_DOC_WAYS += ps pdf +binary-dist-prep: +ifeq "$(mingw32_TARGET_OS)" "1" + $(MAKE) -r --no-print-directory -f ghc.mk windows-binary-dist-prep + $(MAKE) -r --no-print-directory -f ghc.mk windows-installer else -ifneq "$(PDFXMLTEX)" "" -BINDIST_DOC_WAYS += pdf + rm -f bindist-list + $(MAKE) -r --no-print-directory -f ghc.mk bindist BINDIST=YES + $(MAKE) -r --no-print-directory -f ghc.mk unix-binary-dist-prep endif -ifneq "$(XMLTEX)" "" -ifneq "$(DVIPS)" "" -BINDIST_DOC_WAYS += ps -endif # DVIPS -endif # XMLTEX -endif # FOP -endif # XSLTPROC -endif # BINDIST_DOC_WAYS +clean distclean maintainer-clean: + $(MAKE) -r --no-print-directory -f ghc.mk $@ CLEANING=YES + test ! -d testsuite || $(MAKE) -C testsuite $@ -binary-dist :: -ifneq "$(DIR_DOCBOOK_XSL)" "" - @for i in $(BIN_DIST_DIRS); do \ - if test -d "$$i"; then \ - $(MAKE) -C $$i $(MFLAGS) $(BINDIST_DOC_WAYS); \ - echo $(MAKE) -C $$i $(MFLAGS) install-docs XMLDocWays="$(BINDIST_DOC_WAYS)" \ - prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \ - libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \ - $(MAKE) -C $$i $(MFLAGS) install-docs XMLDocWays="$(BINDIST_DOC_WAYS)" \ - prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \ - libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \ - fi \ - done -endif +$(filter clean_%, $(MAKECMDGOALS)) : clean_% : + $(MAKE) -r --no-print-directory -f ghc.mk $@ CLEANING=YES -# Rename scripts to $i.prl and $i.sh where necessary. -# ToDo: do this in a cleaner way... +bootstrapping-files show: + $(MAKE) -r --no-print-directory -f ghc.mk $@ -ifneq "$($(Project)BinDistPrlScripts)" "" -binary-dist:: - @for i in $($(Project)BinDistPrlScripts); do \ - echo "Renaming $$i to $$i.prl"; \ - $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i.prl; \ - done -endif - -ifneq "$($(Project)BinDistLibPrlScripts)" "" -binary-dist:: - @for i in $($(Project)BinDistLibPrlScripts); do \ - echo "Renaming $$i to $$i.prl"; \ - $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i.prl; \ - done -endif - -ifneq "$($(Project)BinDistShScripts)" "" -binary-dist:: - @for i in $($(Project)BinDistShScripts); do \ - if test -x $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i ; then \ - echo "Renaming $$i to $$i.sh"; \ - $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i.sh; \ - fi \ - done +ifeq "$(darwin_TARGET_OS)" "1" +framework-pkg: + $(MAKE) -C distrib/MacOS $@ endif -# -# Do this separately for now -# -binary-pack:: - ( cd $(BIN_DIST_TMPDIR); $(TAR) chzf $(BIN_DIST_NAME).tar.gz $(BIN_DIST_NAME) ) +# install-docs is a historical target that isn't supported in GHC 6.12. See #3662. +install-docs: + @echo "The install-docs target is not supported in GHC 6.12.1 and later." + @echo "'make install' now installs everything, including documentation." + @exit 1 -ifneq "$(way)" "" -.PHONY: package-way-dist -package-way-dist:: - ( cd $(BIN_DIST_TMPDIR); $(FIND) $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print | xargs tar cvf $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar ) - gzip $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar -endif +# If the user says 'make A B', then we don't want to invoke two +# instances of the rule above in parallel: +.NOTPARALLEL: -ifneq "$(way)" "" -remove-way-dist:: - ( cd $(BIN_DIST_TMPDIR); $(FIND) $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print -exec $(RM) {} \; ) endif - -binary-dist:: - @echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!" - -# ----------------------------------------------------------------------------- -# Building source distributions -# -# Do it like this: -# -# $ make -# $ make dist -# -# WARNING: `make dist' calls `make distclean' before tarring up the tree. -# - -.PHONY: dist - -# -# Directory in which we're going to build the src dist -# -SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME) - -# -# Files to include in source distributions -# -SRC_DIST_DIRS += docs distrib $(filter-out docs distrib,$(SUBDIRS)) -SRC_DIST_FILES += \ - configure.ac config.guess config.sub configure \ - aclocal.m4 README Makefile install-sh \ - mk/bootstrap.mk \ - mk/boilerplate.mk mk/config.h.in mk/config.mk.in mk/opts.mk \ - mk/paths.mk mk/package.mk mk/suffix.mk mk/target.mk \ - mk/fptools.css mk/fix_install_names.sh - -dist dist-manifest dist-package :: project-check - -# clean the tree first, leaving certain extra files in place (eg. configure) -dist :: distclean - -dist :: - -rm -rf $(SRC_DIST_DIR) - -$(RM) $(SRC_DIST_NAME).tar.gz - mkdir $(SRC_DIST_DIR) - mkdir $(SRC_DIST_DIR)/mk - $(FIND) $(SRC_DIST_DIRS) -type d \( -name _darcs -prune -o -name SRC -prune -o -name "autom4te*" -prune -o -print \) | sed -e 's!.*!mkdir "$(SRC_DIST_DIR)/&"!' | sh - $(FIND) $(SRC_DIST_DIRS) $(SRC_DIST_FILES) -name _darcs -prune -o -name SRC -prune -o -name "autom4te*" -prune -o -name "*~" -prune -o -name ".cvsignore" -prune -o -name "\#*" -prune -o -name ".\#*" -prune -o -name "log" -prune -o -name "*-SAVE" -prune -o -name "*.orig" -prune -o -name "*.rej" -prune -o ! -type d -print | sed -e 's!.*!$(LN_S) "$(FPTOOLS_TOP_ABS)/&" "$(SRC_DIST_DIR)/&"!' | sh - -# Automatic generation of a MANIFEST file for a source distribution -# tree that is ready to go. -dist-manifest :: - cd $(SRC_DIST_DIR); $(FIND) . \( -type l -o -type f \) -exec ls -lLG {} \; | sed -e 's/\.\///' > MANIFEST - -dist-package :: dist-package-tar-gz - -SRC_DIST_PATHS = $(patsubst %, $(SRC_DIST_NAME)/%, $(SRC_DIST_FILES) $(SRC_DIST_DIRS)) - -dist-package-tar-bz2 :: - BZIP2=-9 $(TAR) chjf $(SRC_DIST_NAME)-src.tar.bz2 $(SRC_DIST_NAME) || $(RM) $(SRC_DIST_NAME)-src.tar.bz2 - -dist-package-tar-gz :: - $(TAR) chzf $(SRC_DIST_NAME)-src.tar.gz $(SRC_DIST_NAME) || $(RM) $(SRC_DIST_NAME)-src.tar.gz - -dist-package-zip :: - cd ..; $(LN_S) $(FPTOOLS_TOP_ABS) $(SRC_DIST_NAME) && \ - $(ZIP) $(ZIP_OPTS) -r $(SRC_DIST_NAME)-src.zip $(SRC_DIST_PATHS) - -# ----------------------------------------------------------------------------- -# HC file bundles - -hc-file-bundle : project-check - $(RM) -r $(ProjectNameShort)-$(ProjectVersion) - $(LN_S) . $(ProjectNameShort)-$(ProjectVersion) - $(FIND) $(ProjectNameShort)-$(ProjectVersion)/compiler \ - $(ProjectNameShort)-$(ProjectVersion)/utils \ - $(ProjectNameShort)-$(ProjectVersion)/compat \ - $(ProjectNameShort)-$(ProjectVersion)/libraries -follow \ - \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go - for f in `$(FIND) $(ProjectNameShort)-$(ProjectVersion)/compiler $(ProjectNameShort)-$(ProjectVersion)/utils $(ProjectNameShort)-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \ - if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \ - echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \ - fi; \ - done; - for f in `$(FIND) $(ProjectNameShort)-$(ProjectVersion)/compiler $(ProjectNameShort)-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \ - if test "x$$f" != "x"; then \ - echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \ - fi; \ - done; - echo $(ProjectNameShort)-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go - echo $(ProjectNameShort)-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go - echo $(ProjectNameShort)-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go - echo $(ProjectNameShort)-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go - echo $(ProjectNameShort)-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go - tar czf $(ProjectNameShort)-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go` - -# ----------------------------------------------------------------------------- -# Cleaning - -CLEAN_FILES += hc-files-to-go *-hc.tar.gz - -DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \ - ghc.spec docs/users_guide/ug-book.xml - -# don't clean config.mk: it's needed when cleaning stuff later on -LATE_DIST_CLEAN_FILES += mk/config.mk - -extraclean:: - $(RM) -rf autom4te.cache - -# ----------------------------------------------------------------------------- - -# Turn off target.mk's rules for 'all', 'boot' and 'install'. -NO_BOOT_TARGET=YES -NO_ALL_TARGET=YES -NO_INSTALL_TARGET=YES - -include $(TOP)/mk/target.mk - -# ----------------------------------------------------------------------------- -