X-Git-Url: http://git.megacz.com/?a=blobdiff_plain;f=Makefile;h=e71fe189adb84819d602ba96ff8ac0c67ccd641f;hb=66579ff945831c5fc9a17c58c722ff01f2268d76;hp=c1ff5a7f23788d3f98120496758db546212aee7a;hpb=0065d5ab628975892cea1ec7303f968c3338cbe1;p=ghc-hetmet.git diff --git a/Makefile b/Makefile index c1ff5a7..e71fe18 100644 --- a/Makefile +++ b/Makefile @@ -4,7 +4,7 @@ # # Targets: # -# bootsrap (DEFAULT) +# bootstrap (DEFAULT) # Builds GHC, then builds the libraries, # then uses this GHC ("stage 1") to build itself # ("stage 2"). @@ -37,6 +37,14 @@ # binary-dist # Builds a binary distribution # +# framework-pkg [MacOS only] +# Builds /Library/Frameworks/GHC.framework wrapped into a Mac +# installer package +# +# framework-binary-dist [MacOS only] +# Builds GHC.framework encapsulating a binary distribution +# (to give a relocatable framework) +# # hc-file-bundle # Builds an HC-file bundle, for bootstrapping # @@ -59,17 +67,46 @@ include $(TOP)/mk/boilerplate.mk # We can't 'make boot' in libraries until stage1 is built ifeq "$(BootingFromHc)" "YES" -SUBDIRS_NOLIB = includes rts docs compiler compat utils driver +SUBDIRS_BUILD = includes compiler docs utils driver else -SUBDIRS_NOLIB = includes compat utils driver docs compiler rts +SUBDIRS_BUILD = includes utils driver docs compiler libraries/Cabal/doc endif -SUBDIRS = $(SUBDIRS_NOLIB) libraries +SUBDIRS = gmp libffi includes utils docs rts compiler ghc driver libraries libraries/Cabal/doc + +check-all: check-packages + +# Sanity check that all the boot libraries are in the tree, to catch +# failure to run darcs-all. +check-packages : + @ds=`grep "^[^# ][^ ]* *[^ ][^ ]* *[^ ][^ ]*$$" packages | sed "s/ .*//"`;\ + for d in $$ds; do \ + if test ! -d $$d; then \ + echo "Looks like you're missing $$d,"; \ + echo "maybe you haven't done './darcs-all get'?"; \ + exit 1; \ + fi \ + done + @if test ! -f libraries/base/configure; then \ + echo "Looks like you're missing base's configure script."; \ + echo "Did you run 'sh boot' at the top level?"; \ + exit 1; \ + fi + +ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" +ifneq "$(WhatGccIsCalled)" "" +GCC_LIB_DEP = stamp.inplace-gcc-lib +endif +endif -stage1 : +stage1 : $(GCC_LIB_DEP) check-all + $(MAKE) -C libraries boot + $(MAKE) -C gmp all + $(MAKE) -C libffi all $(MAKE) -C utils/mkdependC boot + $(MAKE) -C utils with-bootstrapping-compiler @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \ - for i in $(SUBDIRS_NOLIB); do \ + for i in $(SUBDIRS_BUILD); do \ echo "------------------------------------------------------------------------"; \ echo "== $(MAKE) boot $(MFLAGS);"; \ echo " in $(shell pwd)/$$i"; \ @@ -77,7 +114,7 @@ stage1 : $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \ if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ done; \ - for i in $(SUBDIRS_NOLIB); do \ + for i in $(SUBDIRS_BUILD); do \ echo "------------------------------------------------------------------------"; \ echo "== $(MAKE) all $(MFLAGS);"; \ echo " in $(shell pwd)/$$i"; \ @@ -85,15 +122,28 @@ stage1 : $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \ if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ done - @$(MAKE) -C libraries boot - @$(MAKE) -C libraries all - -stage2 : - $(MAKE) -C compiler boot stage=2 + $(MAKE) -C rts boot + $(MAKE) -C rts + $(MAKE) -C libraries all + +# When making distributions (i.e., whether with binary-dist or using the +# vanilla install target to create an installer package), we can have problems +# if some things (e.g. ghc-pkg) are compiled with the bootstrapping compiler +# and some (e.g. the stage 2 compiler) with the stage1 compiler. See #1860 for +# an example. Thus, we explicitly build a second version with the stage 1 +# compiler of all utils that get installed and of all extra support binaries +# includes in binary dists. +stage2 : check-all + $(MAKE) -C compiler stage=2 boot $(MAKE) -C compiler stage=2 + $(MAKE) -C utils with-stage-2 +ifeq "$(HADDOCK_DOCS)" "YES" + $(MAKE) -C libraries doc + $(MAKE) -C compiler doc stage=2 +endif -stage3 : - $(MAKE) -C compiler boot stage=3 +stage3 : check-all + $(MAKE) -C compiler stage=3 boot $(MAKE) -C compiler stage=3 bootstrap : bootstrap2 @@ -104,6 +154,28 @@ bootstrap2 : stage1 bootstrap3 : bootstrap2 $(MAKE) stage3 +ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" +ifneq "$(WhatGccIsCalled)" "" +all :: stamp.inplace-gcc-lib + +.PHONY: stamp.inplace-gcc-lib + +# This is a hack to make Cabal able to find ld when we run tests with +# the inplace ghc. We should probably install all the gcc stuff in our +# tree somewhere, and then have install copy it from there rather than +# from the filesystem. +stamp.inplace-gcc-lib: + $(RM) -r ghc/gcc-lib + mkdir ghc/gcc-lib + cp $(LD) ghc/gcc-lib + touch $@ + +clean :: + $(RM) -r ghc/gcc-lib + $(RM) -f inplace-gcc-lib +endif +endif + all :: bootstrap # ----------------------------------------------------------------------------- @@ -117,8 +189,11 @@ else INSTALL_STAGE = endif +install-strip: + $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install + # Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too -install :: +install :: check-packages @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \ for i in $(SUBDIRS); do \ echo "------------------------------------------------------------------------"; \ @@ -133,7 +208,7 @@ ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" # These files need to be in the InstallShield # INSTALL_DATAS rather than INSTALL_DOCS is used so these files go # in the top-level directory of the distribution -INSTALL_DATAS += ANNOUNCE LICENSE README VERSION +INSTALL_DATAS += ANNOUNCE LICENSE README endif # If installing on Windows with MinGW32, copy the gcc compiler, headers and libs @@ -147,6 +222,8 @@ install :: -mkdir $(prefix)/include/mingw -cp -rp $(GccDir)../include/* $(prefix)/include/mingw -cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib + -cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib + -cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib -cp $(GccDir)../lib/*.* $(prefix)/gcc-lib -cp $(GccDir)gcc.exe $(prefix) -cp $(GccDir)as.exe $(prefix)/gcc-lib @@ -158,6 +235,11 @@ install :: endif endif +# Install gcc-extra-opts +install :: + $(INSTALL_DIR) $(DESTDIR)$(libdir) + $(INSTALL_DATA) $(INSTALL_OPTS) extra-gcc-opts $(DESTDIR)$(libdir) + install-docs :: @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \ for i in $(SUBDIRS); do \ @@ -172,9 +254,6 @@ install-docs :: # ----------------------------------------------------------------------------- # Making a binary distribution # -# To make a particular binary distribution: -# set $(Project) to the name of the project, capitalised (eg. Ghc or Happy). - # `dist' `binary-dist' # Create a distribution tar file for this program. The tar file # should be set up so that the file names in the tar file start with @@ -192,221 +271,208 @@ install-docs :: # that are in the distribution, to make sure they are up to date in # the distribution. See Making Releases. # -# binary-dist is an FPtools addition for binary distributions +# binary-dist is a GHC addition for binary distributions # -ifneq "$(TARGETPLATFORM)" "i386-unknown-mingw32" -GhcBinDistShScripts = ghc-$(ProjectVersion) ghci-$(ProjectVersion) ghc-pkg-$(ProjectVersion) hsc2hs -else -GhcBinDistShScripts = -endif +binary-dist:: + -rm -rf $(BIN_DIST_DIR) + -$(RM) $(BIN_DIST_TAR_BZ2) + +ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" -GhcBinDistPrlScripts = ghcprof -GhcBinDistLibPrlScripts = ghc-asm ghc-split -GhcBinDistBins = hp2ps runghc -GhcBinDistOptBins = runhaskell -GhcBinDistLinks = ghc ghci ghc-pkg -GhcBinDistLibSplicedFiles = package.conf +binary-dist:: + $(MAKE) prefix=$(BIN_DIST_DIR) install + $(MAKE) prefix=$(BIN_DIST_DIR) install-docs -BIN_DIST_TMPDIR=$(FPTOOLS_TOP_ABS) -BIN_DIST_NAME=$(ProjectNameShort)-$(ProjectVersion) +binary-dist:: + cd $(BIN_DIST_DIR) && $(SHELL) ../distrib/prep-bin-dist-mingw -# -# list of toplevel directories to include in binary distrib. -# -BIN_DIST_MAIN_DIR=$($(Project)MainDir) -BIN_DIST_DIRS=$($(Project)BinDistDirs) +binary-dist:: + $(MKDIRHIER) $(BIN_DIST_DIR)/icons + cp distrib/hsicon.ico $(BIN_DIST_DIR)/icons -binary-dist:: binary-dist-pre +# Tar up the distribution and build a manifest +binary-dist :: tar-binary-dist -BIN_DIST_TOP= distrib/Makefile-bin.in \ - distrib/configure-bin.ac \ - distrib/INSTALL \ - $(BIN_DIST_MAIN_DIR)/ANNOUNCE \ - $(BIN_DIST_MAIN_DIR)/VERSION \ - $(BIN_DIST_MAIN_DIR)/LICENSE \ - $(BIN_DIST_MAIN_DIR)/README \ - glafp-utils/mkdirhier/mkdirhier \ - install-sh \ - config.guess \ - config.sub \ - aclocal.m4 +.PHONY: tar-binary-dist +tar-binary-dist: + ( cd $(BIN_DIST_TOPDIR_ABS); $(TAR) cf - $(BIN_DIST_NAME) | bzip2 > $(BIN_DIST_TAR_BZ2) ) + ( cd $(BIN_DIST_TOPDIR_ABS); bunzip2 -c $(BIN_DIST_TAR_BZ2) | $(TAR) tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >$(FPTOOLS_TOP_ABS)/bin-manifest-$(ProjectVersion) ) +else + +.PHONY: binary-dist + +BIN_DIST_VARFILE=$(BIN_DIST_PREP)/Makefile-vars.in + +WHERE_AM_I = $(BIN_DIST_NAME) + +binary-dist:: +# For the most part we will be putting filenames in $(BIN_DIST_LIST), +# and telling tar to tar all of those files up. So to start with we +# remove $(BIN_DIST_LIST) so that we can start with an empty slate + $(RM) -f $(BIN_DIST_LIST) +# Now we add a few files from mk/ to $(BIN_DIST_LIST) + echo $(WHERE_AM_I)/mk/package.mk >> $(BIN_DIST_LIST) + echo $(WHERE_AM_I)/mk/install.mk >> $(BIN_DIST_LIST) + echo $(WHERE_AM_I)/mk/recurse.mk >> $(BIN_DIST_LIST) + echo $(WHERE_AM_I)/mk/cabal.mk >> $(BIN_DIST_LIST) + echo $(WHERE_AM_I)/mk/cabal-flags.mk >> $(BIN_DIST_LIST) + echo $(WHERE_AM_I)/mk/fptools.css >> $(BIN_DIST_LIST) + echo $(WHERE_AM_I)/ANNOUNCE >> $(BIN_DIST_LIST) + echo $(WHERE_AM_I)/LICENSE >> $(BIN_DIST_LIST) + echo $(WHERE_AM_I)/install-sh >> $(BIN_DIST_LIST) + echo $(WHERE_AM_I)/extra-gcc-opts.in >> $(BIN_DIST_LIST) + echo $(WHERE_AM_I)/config.guess >> $(BIN_DIST_LIST) + echo $(WHERE_AM_I)/config.sub >> $(BIN_DIST_LIST) +# Now we recurse into various subdirectories and tell them to add and +# files that they want into $(BIN_DIST_LIST) +# XXX Ug, this duplication of "-C foo WHERE_AM_I=.../foo" isn't nice. + $(MAKE) -C gmp binary-dist WHERE_AM_I=$(WHERE_AM_I)/gmp + $(MAKE) -C includes binary-dist WHERE_AM_I=$(WHERE_AM_I)/includes + $(MAKE) -C compiler binary-dist WHERE_AM_I=$(WHERE_AM_I)/compiler $(INSTALL_STAGE) + $(MAKE) -C ghc binary-dist WHERE_AM_I=$(WHERE_AM_I)/ghc $(INSTALL_STAGE) + $(MAKE) -C rts binary-dist WHERE_AM_I=$(WHERE_AM_I)/rts + $(MAKE) -C driver binary-dist WHERE_AM_I=$(WHERE_AM_I)/driver + $(MAKE) -C utils binary-dist WHERE_AM_I=$(WHERE_AM_I)/utils + $(MAKE) -C docs binary-dist WHERE_AM_I=$(WHERE_AM_I)/docs + $(MAKE) -C libffi binary-dist WHERE_AM_I=$(WHERE_AM_I)/libffi + $(MAKE) -C libraries binary-dist WHERE_AM_I=$(WHERE_AM_I)/libraries + $(MAKE) -C libraries/Cabal/doc binary-dist WHERE_AM_I=$(WHERE_AM_I)/libraries/Cabal/doc +# Now thinks get messier. Some files we need to move around, rename or +# generate. We do this under $(BIN_DIST_PREP). + $(RM) -rf $(BIN_DIST_PREP_DIR) + $(MKDIRHIER) $(BIN_DIST_PREP)/mk + echo 'include $$(TOP)/Makefile-vars' > $(BIN_DIST_PREP)/mk/boilerplate.mk + echo 'include $$(TOP)/mk/package.mk' > $(BIN_DIST_PREP)/mk/target.mk + echo 'include $$(TOP)/mk/install.mk' >> $(BIN_DIST_PREP)/mk/target.mk + echo 'include $$(TOP)/mk/recurse.mk' >> $(BIN_DIST_PREP)/mk/target.mk + touch $(BIN_DIST_PREP)/mk/bindist.mk ifeq "$(darwin_TARGET_OS)" "1" -BIN_DIST_TOP+=mk/fix_install_names.sh + cp mk/fix_install_names.sh $(BIN_DIST_PREP)/mk endif -# -# binary-dist creates a binary bundle, set BIN_DIST_NAME -# to package name and do `make binary-dist Project=' -# (normally this just a thing you would do from the toplevel of fptools) -# -.PHONY: binary-dist-pre binary-dist binary-pack + cp distrib/Makefile $(BIN_DIST_PREP) + cp distrib/INSTALL $(BIN_DIST_PREP) + cp distrib/README $(BIN_DIST_PREP) + cp distrib/configure-bin.ac $(BIN_DIST_PREP)/configure.ac +# We can't just list aclocal.m4 in $(BIN_DIST_LIST), as it needs to be +# next to configure.ac when we run autoreconf + cp aclocal.m4 $(BIN_DIST_PREP) + cd $(BIN_DIST_PREP) && autoreconf +# We need to copy the pwd program that was built with stage1 to where +# the build system expects to find it, i.e. the location the pwd built +# with the bootstrapping compiler normally occupies + $(MKDIRHIER) $(BIN_DIST_PREP)/utils/pwd + cp utils/pwd/dist-install/build/pwd/pwd $(BIN_DIST_PREP)/utils/pwd +# And likewise the installPackage program + $(MKDIRHIER) $(BIN_DIST_PREP)/utils/installPackage/install-inplace/bin + cp utils/installPackage/dist-install/build/installPackage/installPackage \ + $(BIN_DIST_PREP)/utils/installPackage/install-inplace/bin + + echo "package = ghc" >> $(BIN_DIST_VARFILE) + echo "version = $(ProjectVersion)" >> $(BIN_DIST_VARFILE) + echo "ProjectVersion = $(ProjectVersion)" >> $(BIN_DIST_VARFILE) + echo "HaveLibGmp = $(HaveLibGmp)" >> $(BIN_DIST_VARFILE) + echo "GhcLibsWithUnix = $(GhcLibsWithUnix)" >> $(BIN_DIST_VARFILE) + echo "GhcWithInterpreter = $(GhcWithInterpreter)" >> $(BIN_DIST_VARFILE) + echo "GhcHasEditline = $(GhcHasEditline)" >> $(BIN_DIST_VARFILE) + echo "BootingFromHc = $(BootingFromHc)" >> $(BIN_DIST_VARFILE) + echo "XMLDocWays = $(XMLDocWays)" >> $(BIN_DIST_VARFILE) +# We won't actually use xsltproc, but we need to know if it's "" or not + echo "XSLTPROC = $(XSLTPROC)" >> $(BIN_DIST_VARFILE) + echo "TARGETPLATFORM = $(TARGETPLATFORM)" >> $(BIN_DIST_VARFILE) + echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(BIN_DIST_VARFILE) + echo "LATEX_DOCS = $(LATEX_DOCS)" >> $(BIN_DIST_VARFILE) + echo "INTEGER_LIBRARY = $(INTEGER_LIBRARY)" >> $(BIN_DIST_VARFILE) + cat distrib/Makefile-bin-vars.in >> $(BIN_DIST_VARFILE) + +# With that done, we can now build the actual tarball + + $(RM) -f $(BIN_DIST_NAME) + ln -s . $(BIN_DIST_NAME) +# h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source +# tree then we want to include the real file, not a symlink to it + $(TAR) hcf $(BIN_DIST_TAR) -T $(BIN_DIST_LIST) + cd $(BIN_DIST_PREP_DIR) && $(TAR) rf $(BIN_DIST_TAR) $(BIN_DIST_NAME) + bzip2 < $(BIN_DIST_TAR) > $(BIN_DIST_TAR_BZ2) + $(TAR) tf $(BIN_DIST_TAR) | sort > bin-manifest-$(ProjectVersion) +endif -BIN_DIST_NAME=$(ProjectNameShort)-$(ProjectVersion) -BIN_DIST_TMPDIR=$(FPTOOLS_TOP_ABS) +PUBLISH_FILES = $(BIN_DIST_TAR_BZ2) -binary-dist-pre:: -ifeq "$(BIN_DIST)" "" - @echo "WARNING: To run the binary-dist target, you need to set BIN_DIST=1 in your build.mk" && exit 1 -endif - -rm -rf $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) - -$(RM) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME).tar.gz - -echo "BIN_DIST_DIRS = $(BIN_DIST_DIRS)" - @for i in $(BIN_DIST_DIRS); do \ - if test -d "$$i"; then \ - echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM); \ - $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM); \ - echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM); \ - $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM); \ - echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \ - $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \ - echo $(MAKE) -C $$i $(MFLAGS) $(INSTALL_STAGE) install \ - prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \ - libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \ - $(MAKE) -C $$i $(MFLAGS) $(INSTALL_STAGE) install \ - prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \ - libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \ - fi; \ - done +# Upload the distribution and documentation +ifneq "$(ISCC)" "" +WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-$(TARGETPLATFORM) +WINDOWS_INSTALLER = $(WINDOWS_INSTALLER_BASE)$(exeext) -binary-dist:: - @for i in $(BIN_DIST_TOP); do \ - if test -f "$$i"; then \ - echo cp $$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME); \ - cp $$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME); \ - fi; \ - done; - @echo "Configuring the Makefile for this project..." - touch $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "package = $(ProjectNameShort)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "version = $(ProjectVersion)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "PACKAGE_SH_SCRIPTS = $($(Project)BinDistShScripts)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "PACKAGE_PRL_SCRIPTS = $($(Project)BinDistPrlScripts)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "PACKAGE_LIB_PRL_SCRIPTS = $($(Project)BinDistLibPrlScripts)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "PACKAGE_LIB_SPLICED_FILES = $($(Project)BinDistLibSplicedFiles)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "PACKAGE_BINS = $($(Project)BinDistBins)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "PACKAGE_OPT_BINS = $($(Project)BinDistOptBins)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "PACKAGE_LINKS = $($(Project)BinDistLinks)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - cat $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile-bin.in >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - @echo "Generating a shippable configure script.." - $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/configure-bin.ac $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/configure.ac - ( cd $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME); autoconf ) - if test -x $(BIN_DIST_MAIN_DIR)/mk/post-install-script ; then \ - cp $(BIN_DIST_MAIN_DIR)/mk/post-install-script \ - $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) ; \ - fi - if test -x $(BIN_DIST_MAIN_DIR)/mk/post-inplace-script ; then \ - cp $(BIN_DIST_MAIN_DIR)/mk/post-inplace-script \ - $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) ; \ - fi -# -# binary dist'ing the documentation. -# The default documentation to build/install is given below; overrideable -# via build.mk or the 'make' command-line. +PUBLISH_FILES += $(WINDOWS_INSTALLER) -ifndef BINDIST_DOC_WAYS +binary-dist :: generate-windows-installer -ifneq "$(XSLTPROC)" "" -BINDIST_DOC_WAYS = html -ifneq "$(FOP)" "" -BINDIST_DOC_WAYS += ps pdf -else -ifneq "$(PDFXMLTEX)" "" -BINDIST_DOC_WAYS += pdf +.PHONY: generate-windows-installer +generate-windows-installer :: + $(SED) "s/@VERSION@/$(ProjectVersion)/" distrib/ghc.iss | $(ISCC) /O. /F$(WINDOWS_INSTALLER_BASE) - endif -ifneq "$(XMLTEX)" "" -ifneq "$(DVIPS)" "" -BINDIST_DOC_WAYS += ps -endif # DVIPS -endif # XMLTEX -endif # FOP -endif # XSLTPROC - -endif # BINDIST_DOC_WAYS - -binary-dist :: -ifneq "$(DIR_DOCBOOK_XSL)" "" - @for i in $(BIN_DIST_DIRS); do \ - if test -d "$$i"; then \ - $(MAKE) -C $$i $(MFLAGS) $(BINDIST_DOC_WAYS); \ - echo $(MAKE) -C $$i $(MFLAGS) install-docs XMLDocWays="$(BINDIST_DOC_WAYS)" \ - prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \ - libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \ - $(MAKE) -C $$i $(MFLAGS) install-docs XMLDocWays="$(BINDIST_DOC_WAYS)" \ - prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \ - libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \ - fi \ - done + +# Upload the distribution and documentation +ifneq "$(PublishLocation)" "" +publish :: + make publish-binary-dist 'prefix=$(BIN_DIST_INST_DIR)' endif -# Rename scripts to $i.prl and $i.sh where necessary. -# ToDo: do this in a cleaner way... +nTimes = set -e; for i in `seq 1 $(1)`; do echo Try "$$i: $(2)"; if $(2); then break; fi; done -ifneq "$($(Project)BinDistPrlScripts)" "" -binary-dist:: - @for i in $($(Project)BinDistPrlScripts); do \ - echo "Renaming $$i to $$i.prl"; \ - $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i.prl; \ +.PHONY: publish-binary-dist +publish-binary-dist :: + @for f in $(PUBLISH_FILES); \ + do $(call nTimes,10,$(PublishCp) $$f $(PublishLocation)/dist); \ done -endif -ifneq "$($(Project)BinDistLibPrlScripts)" "" -binary-dist:: - @for i in $($(Project)BinDistLibPrlScripts); do \ - echo "Renaming $$i to $$i.prl"; \ - $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i.prl; \ - done -endif +# You need to "make binddisttest" before publishing the docs, as it +# works by publish setting $(prefix) to inside the binddisttest +# directory so $(docdir) points to the right place. -ifneq "$($(Project)BinDistShScripts)" "" -binary-dist:: - @for i in $($(Project)BinDistShScripts); do \ - if test -x $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i ; then \ - echo "Renaming $$i to $$i.sh"; \ - $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i.sh; \ - fi \ - done -endif +# We assume that Windows means Cygwin, as we can't just use docdir +# unchanged or rsync (really SSH?) thinks that c:/foo means /foo on +# the machine c. -# -# Do this separately for now -# -binary-pack:: - ( cd $(BIN_DIST_TMPDIR); $(TAR) chzf $(BIN_DIST_NAME).tar.gz $(BIN_DIST_NAME) ) - -ifneq "$(way)" "" -.PHONY: package-way-dist -package-way-dist:: - ( cd $(BIN_DIST_TMPDIR); $(FIND) $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print | xargs tar cvf $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar ) - gzip $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar +ifeq "$(Windows)" "YES" +PUBLISH_DOCDIR = $(shell cygpath --unix $(docdir)) +else +PUBLISH_DOCDIR = $(docdir) endif -ifneq "$(way)" "" -remove-way-dist:: - ( cd $(BIN_DIST_TMPDIR); $(FIND) $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print -exec $(RM) {} \; ) -endif +publish-binary-dist :: + $(call nTimes,10,$(PublishCp) -r "$(PUBLISH_DOCDIR)"/* $(PublishLocation)/docs) binary-dist:: @echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!" # ----------------------------------------------------------------------------- +# Building MacOS installer packages +# +# 'framework-pkg' +# Create an installer package for /Library/Frameworks/GHC.framework +# +# 'framework-binary-dist' +# Create an installer package for GHC.framework encapsulating a +# binary-dist to make it relocatable +# FIXME: This is only partially implemented so far + +ifeq "$(darwin_TARGET_OS)" "1" + +.PHONY: framework-pkg framework-binary-dist + +framework-pkg: + $(MAKE) -C distrib/MacOS framework-pkg + +framework-binary-dist: + $(MAKE) -C distrib/MacOS framework-binary-dist + +endif + +# ----------------------------------------------------------------------------- # Building source distributions # # Do it like this: @@ -422,79 +488,125 @@ binary-dist:: # # Directory in which we're going to build the src dist # +SRC_DIST_NAME=ghc-$(ProjectVersion) SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME) # # Files to include in source distributions # -SRC_DIST_DIRS += docs distrib $(filter-out docs distrib,$(SUBDIRS)) +SRC_DIST_DIRS += mk docs distrib bindisttest $(filter-out docs distrib libraries/Cabal/doc,$(SUBDIRS)) SRC_DIST_FILES += \ configure.ac config.guess config.sub configure \ - aclocal.m4 README Makefile install-sh \ - mk/bootstrap.mk \ - mk/boilerplate.mk mk/config.h.in mk/config.mk.in mk/opts.mk \ - mk/paths.mk mk/package.mk mk/suffix.mk mk/target.mk \ - mk/fptools.css mk/fix_install_names.sh + aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \ + ghc.spec.in ghc.spec extra-gcc-opts.in VERSION boot -dist dist-manifest dist-package :: project-check +# ----------------------------------------------------------------------------- +# Source distributions -# clean the tree first, leaving certain extra files in place (eg. configure) -dist :: distclean +# A source dist is built from a complete build tree, because we +# require some extra files not contained in a darcs checkout: the +# output from Happy and Alex, for example. +# +# The steps performed by 'make dist' are as follows: +# - create a complete link-tree of the current build tree in /tmp +# - run 'make distclean' on that tree +# - remove a bunch of other files that we know shouldn't be in the dist +# - tar up first the extralibs package, then the main source package + +EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/%, $(shell grep -E "extralibs|dph" packages | grep -v "^\#" | sed "s/ .*//")) + +SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2 +SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2 + +VERSION : + echo $(ProjectVersion) >VERSION + +dist :: VERSION + +# Use: +# $(call copy_generated_compiler_file,cmm,CmmLex,x) +# to copy the generated file that replaces compiler/cmm/CmmLex.x +# XXX Should this be unconditional? Do we want to support making a src dist +# from an unbuilt tree? +copy_generated_compiler_file = \ + if test -f $(FPTOOLS_TOP_ABS)/compiler/dist-stage2/build/$2.hs; \ + then \ + $(CP) $(FPTOOLS_TOP_ABS)/compiler/dist-stage2/build/$2.hs compiler/$1/ ; \ + mv compiler/$1/$2.$3 compiler/$1/$2.$3.source ; \ + fi +copy_generated_util_file = \ + if test -f $(FPTOOLS_TOP_ABS)/utils/$1/dist-install/build/$1/$1-tmp/$2.hs; \ + then \ + $(CP) $(FPTOOLS_TOP_ABS)/utils/$1/dist-install/build/$1/$1-tmp/$2.hs utils/$1/ ; \ + mv utils/$1/$2.$3 utils/$1/$2.$3.source ; \ + fi dist :: - -rm -rf $(SRC_DIST_DIR) - -$(RM) $(SRC_DIST_NAME).tar.gz + $(RM) -rf $(SRC_DIST_DIR) + $(RM) $(SRC_DIST_NAME).tar.gz mkdir $(SRC_DIST_DIR) - mkdir $(SRC_DIST_DIR)/mk - $(FIND) $(SRC_DIST_DIRS) -type d \( -name _darcs -prune -o -name SRC -prune -o -name "autom4te*" -prune -o -print \) | sed -e 's!.*!mkdir "$(SRC_DIST_DIR)/&"!' | sh - $(FIND) $(SRC_DIST_DIRS) $(SRC_DIST_FILES) -name _darcs -prune -o -name SRC -prune -o -name "autom4te*" -prune -o -name "*~" -prune -o -name ".cvsignore" -prune -o -name "\#*" -prune -o -name ".\#*" -prune -o -name "log" -prune -o -name "*-SAVE" -prune -o -name "*.orig" -prune -o -name "*.rej" -prune -o ! -type d -print | sed -e 's!.*!$(LN_S) "$(FPTOOLS_TOP_ABS)/&" "$(SRC_DIST_DIR)/&"!' | sh - -# Automatic generation of a MANIFEST file for a source distribution -# tree that is ready to go. -dist-manifest :: - cd $(SRC_DIST_DIR); $(FIND) . \( -type l -o -type f \) -exec ls -lLG {} \; | sed -e 's/\.\///' > MANIFEST - -dist-package :: dist-package-tar-gz - -SRC_DIST_PATHS = $(patsubst %, $(SRC_DIST_NAME)/%, $(SRC_DIST_FILES) $(SRC_DIST_DIRS)) - -dist-package-tar-bz2 :: - BZIP2=-9 $(TAR) chjf $(SRC_DIST_NAME)-src.tar.bz2 $(SRC_DIST_NAME) || $(RM) $(SRC_DIST_NAME)-src.tar.bz2 - -dist-package-tar-gz :: - $(TAR) chzf $(SRC_DIST_NAME)-src.tar.gz $(SRC_DIST_NAME) || $(RM) $(SRC_DIST_NAME)-src.tar.gz - -dist-package-zip :: - cd ..; $(LN_S) $(FPTOOLS_TOP_ABS) $(SRC_DIST_NAME) && \ - $(ZIP) $(ZIP_OPTS) -r $(SRC_DIST_NAME)-src.zip $(SRC_DIST_PATHS) + ( cd $(SRC_DIST_DIR) \ + && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \ + && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \ + && $(MAKE) distclean \ + && if test -f $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs; then $(CP) $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs libraries/haskell-src/Language/Haskell/ ; mv libraries/haskell-src/Language/Haskell/Parser.ly libraries/haskell-src/Language/Haskell/Parser.ly.source ; fi \ + && $(call copy_generated_compiler_file,cmm,CmmLex,x) \ + && $(call copy_generated_compiler_file,cmm,CmmParse,y) \ + && $(call copy_generated_compiler_file,main,ParsePkgConf,y) \ + && $(call copy_generated_compiler_file,parser,HaddockLex,x) \ + && $(call copy_generated_compiler_file,parser,HaddockParse,y) \ + && $(call copy_generated_compiler_file,parser,Lexer,x) \ + && $(call copy_generated_compiler_file,parser,Parser,y.pp) \ + && $(call copy_generated_compiler_file,parser,ParserCore,y) \ + && $(call copy_generated_util_file,hpc,HpcParser,y) \ + && $(RM) -rf compiler/stage[123] mk/build.mk \ + && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \ + ) + $(TAR) chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL) + $(RM) -rf $(EXTRA_LIBS) + $(TAR) chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL) + +# Upload the distribution(s) +# Retrying is to work around buggy firewalls that corrupt large file transfers +# over SSH. +ifneq "$(PublishLocation)" "" +dist :: + @for i in 0 1 2 3 4 5 6 7 8 9; do \ + echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist"; \ + if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist; then break; fi\ + done + @for i in 0 1 2 3 4 5 6 7 8 9; do \ + echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist"; \ + if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist; then break; fi\ + done +endif # ----------------------------------------------------------------------------- # HC file bundles -hc-file-bundle : project-check - $(RM) -r $(ProjectNameShort)-$(ProjectVersion) - $(LN_S) . $(ProjectNameShort)-$(ProjectVersion) - $(FIND) $(ProjectNameShort)-$(ProjectVersion)/compiler \ - $(ProjectNameShort)-$(ProjectVersion)/utils \ - $(ProjectNameShort)-$(ProjectVersion)/compat \ - $(ProjectNameShort)-$(ProjectVersion)/libraries -follow \ +hc-file-bundle : + $(RM) -r ghc-$(ProjectVersion) + $(LN_S) . ghc-$(ProjectVersion) + $(FIND) ghc-$(ProjectVersion)/compiler \ + ghc-$(ProjectVersion)/utils \ + ghc-$(ProjectVersion)/libraries -follow \ \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go - for f in `$(FIND) $(ProjectNameShort)-$(ProjectVersion)/compiler $(ProjectNameShort)-$(ProjectVersion)/utils $(ProjectNameShort)-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \ - if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \ + for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \ + if test "x$$f" != "x" && test -f `echo "$$f" | sed 's/hsc$$/hs/g'`; then \ echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \ fi; \ done; - for f in `$(FIND) $(ProjectNameShort)-$(ProjectVersion)/compiler $(ProjectNameShort)-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \ + for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \ if test "x$$f" != "x"; then \ echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \ fi; \ done; - echo $(ProjectNameShort)-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go - echo $(ProjectNameShort)-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go - echo $(ProjectNameShort)-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go - echo $(ProjectNameShort)-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go - echo $(ProjectNameShort)-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go - tar czf $(ProjectNameShort)-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go` + echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go + echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go + echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go + echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go + echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go + $(TAR) czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go` # ----------------------------------------------------------------------------- # Cleaning @@ -502,14 +614,24 @@ hc-file-bundle : project-check CLEAN_FILES += hc-files-to-go *-hc.tar.gz DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \ - ghc.spec docs/users_guide/ug-book.xml + docs/users_guide/ug-book.xml extra-gcc-opts # don't clean config.mk: it's needed when cleaning stuff later on -LATE_DIST_CLEAN_FILES += mk/config.mk +LATE_DIST_CLEAN_FILES += mk/config.mk mk/are-validating.mk + +# VERSION is shipped in a source dist +MAINTAINER_CLEAN_FILES += VERSION extraclean:: $(RM) -rf autom4te.cache +clean distclean :: + $(RM) -rf inplace-datadir + +clean distclean :: + $(MAKE) -C bindisttest $@ + if test -d testsuite; then $(MAKE) -C testsuite $@; fi + # ----------------------------------------------------------------------------- # Turn off target.mk's rules for 'all', 'boot' and 'install'.