X-Git-Url: http://git.megacz.com/?a=blobdiff_plain;f=compiler%2FMakefile;h=6ea209be949b7e61dc4ddf6941d62e3047ebed99;hb=9c325bab1e7ed7d305a79ef9e366b6ac87b8b1b6;hp=01a6ba42706b3953f60b5f3da8773aa5d425b5bd;hpb=391a299af4deb7bd593696ee6d53ac8f5c4667e1;p=ghc-hetmet.git

diff --git a/compiler/Makefile b/compiler/Makefile
index 01a6ba4..6ea209b 100644
--- a/compiler/Makefile
+++ b/compiler/Makefile
@@ -78,14 +78,9 @@ clean.stage.%:
 CONFIGURE_FLAGS_STAGE1 += --flags=stage1
 CONFIGURE_FLAGS_STAGE2 += --flags=-stage1
 
-CONFIGURE_FLAGS_STAGE1 += --flags=-ghci
-
 ifeq "$(GhcWithNativeCodeGen)" "YES"
 CONFIGURE_FLAGS_STAGE1 += --flags=ncg
 CONFIGURE_FLAGS_STAGE2 += --flags=ncg
-else
-CONFIGURE_FLAGS_STAGE1 += --flags=-ncg
-CONFIGURE_FLAGS_STAGE2 += --flags=-ncg
 endif
 
 ifeq "$(GhcWithInterpreter)" "YES"
@@ -99,8 +94,6 @@ CONFIGURE_FLAGS_STAGE2 += --enable-shared
 # function which sets the keepCAFs flag for the RTS before any Haskell
 # code is run.
 CONFIGURE_FLAGS_STAGE2 += --flags=dynlibs
-else
-CONFIGURE_FLAGS_STAGE2 += --flags=-dynlibs
 endif
 
 ifeq "$(GhcEnableTablesNextToCode) $(GhcUnregisterised)" "YES NO"
@@ -116,31 +109,17 @@ ifeq "$(GhciWithDebugger)" "YES"
 CONFIGURE_FLAGS_STAGE2 += --ghc-option=-DDEBUGGER
 endif
 
-# Enable editline if either:
-#   - we're building stage 1 and $(GhcHasEditline)="YES"
+# Enable editline if:
 #   - we're building stage 2/3, and we have built the editline package
 #
 # But we don't enable editline on Windows, as Windows terminals have
 # editline-like support builtin.
 #
-ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
-CONFIGURE_FLAGS_STAGE1 += --flags=-editline
-CONFIGURE_FLAGS_STAGE2 += --flags=-editline
-else
-ifeq "$(GhcHasEditline)" "YES"
-CONFIGURE_FLAGS_STAGE1 += --flags=editline
-else
-CONFIGURE_FLAGS_STAGE1 += --flags=-editline
-endif
+ifneq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 ifeq "$(wildcard $(FPTOOLS_TOP_ABS)/libraries/editline/unbuildable)" ""
 CONFIGURE_FLAGS_STAGE2 += --flags=editline
-else
-CONFIGURE_FLAGS_STAGE2 += --flags=-editline
 endif
 endif
-
-else
-CONFIGURE_FLAGS_STAGE2 += --flags=-ghci
 endif
 
 ifeq "$(GhcWithNativeCodeGen)" "NO"
@@ -150,7 +129,7 @@ COMMON_CONFIGURE_FLAGS += --ghc-option=-DOMIT_NATIVE_CODEGEN
 endif
 
 ifeq "$(TargetOS_CPP)" "openbsd"
-COMMON_CONFIGURE_FLAGS += --ld-options="-Xlinker -E"
+COMMON_CONFIGURE_FLAGS += --ld-options=-E
 endif
 
 ifeq "$(GhcUnregisterised)" "NO"
@@ -160,6 +139,17 @@ COMMON_CONFIGURE_FLAGS += --ld-option=-Wl,--relax
 endif
 endif
 
+# We need to turn on profiling either if we have been asked to
+# (GhcLibProfiled = YES) or if we want GHC itself to be compiled with
+# profiling enabled (GhcProfiled = YES).
+ifneq "$(GhcLibProfiled) $(GhcProfiled)" "NO NO"
+CONFIGURE_FLAGS_STAGE2 += --enable-library-profiling
+# And if we're profiling GHC then we want lots of SCCs
+ifeq "$(GhcProfiled)" "YES"
+CONFIGURE_FLAGS_STAGE2 += --ghc-option=-auto-all
+endif
+endif
+
 ifeq "$(HOSTPLATFORM)" "i386-unknown-mingw32"
 # The #include is vital for the via-C route with older compilers, else the C
 # compiler doesn't realise that the stcall foreign imports are indeed
@@ -184,7 +174,7 @@ CONFIGURE_FLAGS_STAGE2 += $(USE_STAGE1_CONFIGURE_FLAGS)
 CONFIGURE_FLAGS_STAGE3 += $(USE_STAGE2_CONFIGURE_FLAGS)
 
 boot.stage.%: $(PRIMOP_BITS) $(CONFIG_HS) parser/Parser.y
-	test -e $(STAGE3_PACKAGE_CONF) || echo "[]" > $(STAGE3_PACKAGE_CONF)
+	test -f $(STAGE3_PACKAGE_CONF) || echo "[]" > $(STAGE3_PACKAGE_CONF)
 	$(CABAL) configure --distpref dist-stage$* \
 	                   $(CONFIGURE_FLAGS_STAGE$*) \
 	                   $(INSTALL_DIRS_CONFIGURE_FLAGS) \
@@ -199,11 +189,12 @@ build.stage.%:
 	$(MAKE) -C ../ghc stage=$*
 
 doc.stage.%:
-	$(CABAL) haddock --distpref dist-stage$*
+	$(CABAL) haddock --distpref dist-stage$* \
+	                 --haddock-option=--optghc=-DSTAGE=$* \
+	                 --with-haddock=$(FPTOOLS_TOP_ABS)/utils/haddock/install-inplace/bin/haddock
 
-# XXX We ought to actually install the (stage 2) library
 install:
-	@:
+	$(INSTALL_PACKAGE) install '$(GHC_PKG_INSTALL_PROG)' '$(DESTDIR)$(datadir)/package.conf' '$(DESTDIR)' '$(prefix)' '$(iprefix)' '$(ibindir)' '$(ilibdir)' '$(ilibexecdir)' '$(idynlibdir)' '$(idatadir)' '$(idocdir)' '$(ihtmldir)' '$(ihaddockdir)' --distpref dist-stage2
 
 # -----------------------------------------------------------------------------
 # Create compiler configuration
@@ -450,10 +441,24 @@ primop-primop-info.hs-incl: prelude/primops.txt
 primop-usage.hs-incl: prelude/primops.txt
 	$(GENPRIMOP) --usage              < $< > $@
 
+html:
+	$(MAKE) doc stage=2
+
+install-docs:
+	@:
+
 #-----------------------------------------------------------------------------
 # binary-dist
 #
 
+# Ideally we'd get these from the Cabal file's Install-Includes:
+BINDIST_EXTRAS += HsVersions.h
+ifeq "$(stage)" "1"
+BINDIST_EXTRAS += stage1/ghc_boot_platform.h
+else
+BINDIST_EXTRAS += stage2plus/ghc_boot_platform.h
+endif
+
 include $(TOP)/mk/bindist.mk
 LIB_DIST_DIR = dist-stage$(stage)