X-Git-Url: http://git.megacz.com/?a=blobdiff_plain;f=mk%2Fconfig.mk.in;h=3bffb6ac4f04eed2e746c9eb160166c28dee8a88;hb=50027272414438955dbc41696541cbd25da55883;hp=24d43d98e25cb00f53f0416bdf58edee991ff778;hpb=803963adcff2a811b7ec494e37ab8b2e318bff45;p=ghc-hetmet.git diff --git a/mk/config.mk.in b/mk/config.mk.in index 24d43d9..3bffb6a 100644 --- a/mk/config.mk.in +++ b/mk/config.mk.in @@ -97,29 +97,27 @@ exeext=@exeext@ # ################################################################################ -# -# What parts to build: An fptools build tree does not have to be built -# all in one go. By setting the list of ProjectsToBuild in build.mk you can -# control which projects are built. -# -# Caution: the projects are built in the order given here, so if some -# projects use others you must list them in the correct order. -# -# Generally: * glafp-utils should be first -# * happy next -# * ghc next -# then it's up to you +# BootingFromHc - build GHC and the libraries from .hc files? +BootingFromHc = @BootingFromHc@ -ifeq "$(GhcWithHscBuiltViaC)" "YES" -# need hslibs/lang first if we're bootstrapping -ProjectsToBuild = glafp-utils hslibs ghc +# build the libs first if we're bootstrapping from .hc files +ifeq "$(BootingFromHc)" "YES" +AllProjects = glafp-utils hslibs ghc green-card happy hdirect hood nofib else -ProjectsToBuild = glafp-utils ghc hslibs +AllProjects = glafp-utils ghc hslibs green-card happy hdirect hood nofib endif + +# +# (OPTIONAL) set ProjectsToBuild to a list of projects to be built. If this +# list is empty, then all projects present in the source tree will be built. +# +ProjectsToBuild = + # -# Make a distinction between building and installing +# set ProjectsDontInstall to a list of projects which are normally built but +# not installed. # -ProjectsToInstall = glafp-utils ghc hslibs +ProjectsDontInstall = glafp-utils nofib # # Should the various project tests directories be built? @@ -159,36 +157,49 @@ GhcCompilerWays= # # -dcore-lint check the types after every pass of the compiler; # a pretty strong internal check -GhcHcOpts=-O +GhcHcOpts=-O -Rghc-timing -# GhcWithHscBuiltViaC - build GHC compiler proper (\`hsc') from .hc files? -GhcWithHscBuiltViaC=@BootingFromHc@ +# Build a compiler that will build *unregisterised* libraries and +# binaries by default. Unregisterised code is supposed to compile and +# run without any support for architecture-specific assembly mangling, +# register assignment or tail-calls, and is therefore a good way to get +# started when porting GHC to new architectures. +# +# If this is set to NO, you can still use the unregisterised way +# (way 'u') to get unregisterised code, but the default way will be +# registerised. +# +# NOTE: this is not the same as building the compiler itself +# unregisterised. That's done by either (a) bootstrapping with a +# compiler that was built with GhcUnregisterized=YES, or (b) +# bootstrapping with a compiler that has way 'u' libraries, and the +# flag '-unreg' is added to GhcHcOpts above. +# +GhcUnregisterised=NO # Build a compiler with a native code generator backend # (as well as a C backend) # # Target platforms supported: # i386, alpha & sparc -GhcWithNativeCodeGen=$(shell if (test x$(findstring $(HostArch_CPP),i386 alpha sparc) = x); then echo NO; else echo YES; fi) +ifneq "$(findstring $(HostArch_CPP), i386 alpha sparc)" "" +GhcWithNativeCodeGen=YES +else +GhcWithNativeCodeGen=NO +endif -# Include GHCi in the compiler -ifeq "$(linux_TARGET_OS)" "1" +HaveLibDL = @HaveLibDL@ + +# Include GHCi in the compiler. Default to NO for the time being. + +ifneq "$(findstring $(HostOS_CPP), linux solaris freebsd netbsd openbsd)" "" GhcWithInterpreter=YES +ifeq "$(HaveLibDL)" "YES" +SRC_HC_OPTS += -ldl +endif else -ifeq "$(solaris_TARGET_OS)" "1" -GhcWithInterpreter=YES -else -ifeq "$(freebsd_TARGET_OS)" "1" -GhcWithInterpreter=YES -else -ifeq "$(netbsd_TARGET_OS)" "1" -GhcWithInterpreter=YES -else GhcWithInterpreter=NO endif -endif -endif -endif # # Building various ways? @@ -196,11 +207,6 @@ endif BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS))) BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS))) -# Include compiler support for letting the compiler (optionally) report -# your compilation to a central server for generation of fun stats. -# -GhcReportCompiles=NO - #------------------------------------------------------------------------------ # Options for GHC's Prelude @@ -208,7 +214,7 @@ GhcReportCompiles=NO # In addition to the normal sequential way, the default is to also build # profiled prelude libraries. # When booting from .hc files, turn this off. -ifeq "$(GhcWithHscBuiltViaC)" "YES" +ifeq "$(BootingFromHc)" "YES" GhcLibWays= else GhcLibWays=p @@ -222,17 +228,21 @@ endif # -O is pretty desirable, otherwise no inlining of prelude # things (incl "+") happens when compiling with this compiler -GhcLibHcOpts=-O +GhcLibHcOpts=-O -Rghc-timing # Win32 only: Enable the RTS and libraries to be built as DLLs -# Don't split object files for libs if we're building DLLs -EnableWin32DLLs=@EnableWin32DLLs@ -ifeq "$(EnableWin32DLLs)" "YES" -SplitObjs=NO -else +DLLized=@EnableWin32DLLs@ + +# Don't split object files for libs if we're building DLLs, or booting from +# .hc files. SplitObjs=YES -endif +ifeq "$(DLLized)" "YES" +SplitObjs=NO +endif +ifeq "$(BootingFromHc)" "YES" +SplitObjs=NO +endif # Strip local symbols from libraries? This can make the libraries smaller, # but makes debugging somewhat more difficult. Doesn't work with all ld's. @@ -254,6 +264,9 @@ StripLibraries=NO GhcRtsHcOpts=-O2 GhcRtsCcOpts=-O2 -optc-fomit-frame-pointer +# Include the front panel code? Needs GTK+. +GhcRtsWithFrontPanel = NO + ################################################################################ # # hslibs project @@ -269,7 +282,7 @@ GhcRtsCcOpts=-O2 -optc-fomit-frame-pointer HsLibsFor = ghc # hslibs for GHC also uses the following variables (defined above): -# GhcLibWays, GhcLibHcOpts, GhcLibToolsHcOpts, EnableWin32DLLs, StripLibraries +# GhcLibWays, GhcLibHcOpts, GhcLibToolsHcOpts, DLLized, StripLibraries # Haskell compiler options for tools in hslibs GhcLibToolsHcOpts=-O @@ -286,6 +299,9 @@ LibsReadline=@LibsReadline@ # ReadlineIncludePath= +# Math library +LIBM=@LIBM@ + # Build the Haskell OpenGL/GLUT binding? # GhcLibsWithHOpenGL=@GhcLibsWithHOpenGL@ @@ -366,7 +382,7 @@ NoFibHcOpts = -O ################################################################################ # Directory used by GHC (and possibly other tools) for storing -# temporary files. If your /tmp isn't big enough, either override +# temporary files. If your TMPDIR isn't big enough, either override # this in build.mk or set your environment variable "TMPDIR" to point # to somewhere with more space. (TMPDIR=. is a good choice). @@ -376,10 +392,22 @@ NoFibHcOpts = -O # setting the TMPDIR env var would have no effect in the build tree. DEFAULT_TMPDIR = /tmp +ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32" +DEFAULT_TMPDIR = C:/TEMP +endif +ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" +DEFAULT_TMPDIR = C:/TEMP +endif # FPTOOLS_TOP: the top of the fptools hierarchy, absolute path. FPTOOLS_TOP_ABS = @hardtop@ +ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32" +FPTOOLS_TOP_ABS = $(subst \,/,$(shell cygpath -w @hardtop@)) +endif +ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" +FPTOOLS_TOP_ABS = $(subst \,/,$(shell cygpath -w @hardtop@)) +endif # # Installation directories, we don't use half of these, @@ -438,7 +466,7 @@ endif ifeq "$(strip $(mandir))" "" mandir = $(prefix)/man endif - + ################################################################################ # @@ -502,10 +530,9 @@ HAPPY_PREFIX = $(FPTOOLS_TOP)/happy/src/ GREENCARD_PREFIX = $(FPTOOLS_TOP)/green-card/src/ UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/ -STAT2RESID_PREFIX = $(FPTOOLS_TOP)/ghc/utils/stat2resid/ HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/ HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hstags/ - +HSC2HS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hsc2hs/ #----------------------------------------------------------------------------- # Haskell compilers and mkdependHS @@ -529,7 +556,7 @@ HBC = @HBC@ NHC = @NHC@ HC = @WithHc@ -MKDEPENDHS = $(HC) +MKDEPENDHS = $(GHC) # Sometimes we want to invoke ghc from the build tree in different # projects (eg. it's handy to have a nofib & a ghc build in the same @@ -552,6 +579,9 @@ else endif endif +# default C compiler flags +SRC_CC_OPTS = -O + #----------------------------------------------------------------------------- # GMP Library (version 2.0.x or above) # @@ -565,6 +595,12 @@ LibGmp = @LibGmp@ HaveRegex = @HaveRegex@ #----------------------------------------------------------------------------- +# GTK+ + +GTK_CONFIG = @GTK_CONFIG@ +GTK_VERSION = @GTK_VERSION@ + +#----------------------------------------------------------------------------- # Flex FLEX = @LEX@ @@ -598,6 +634,8 @@ INSTALL = @INSTALL@ # INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL)) LATEX = latex +HEVEA = hevea +HACHA = hacha LN_S = @LN_S@ MANMACROS = -man MSMACROS = -ms @@ -705,7 +743,7 @@ HAPPY_VERSION = @HappyVersion@ # # Options to pass to Happy when we're going to compile the output with GHC # -GHC_HAPPY_OPTS = $(shell if expr $(HAPPY_VERSION) \< "1.8" >/dev/null; then echo -g; else echo -agc; fi) +GHC_HAPPY_OPTS = $(shell if ( test `echo $(HAPPY_VERSION) | sed -e "s/\(.*\)\..*/\1/g"` "-gt" "1" || test `echo $(HAPPY_VERSION) | sed -e "s/.*\.\(.*\)/\1/g"` "-ge" "9" ); then echo -agc; else echo -g; fi) # # Stuff from fptools/literate @@ -721,10 +759,9 @@ LIT2TEXT = $(LITERATE_PREFIX)lit2text # Stuff from fptools/ghc/utils # UNLIT = $(UNLIT_PREFIX)unlit$(EXE_SUFFIX) -STAT2RESID = $(STAT2RESID_PREFIX)stat2resid HP2PS = $(HP2PS_PREFIX)hp2ps$(EXE_SUFFIX) -HSCPP = $(HSCPP_PREFIX)hscpp HSTAGS = $(HSTAGS_PREFIX)hstags +HSC2HS = $(HSC2HS_PREFIX)hsc2hs-inplace # # Options for the compiling different `ways'. Various projects within @@ -797,10 +834,6 @@ WAY_mp_HC_OPTS=-parallel WAY_mg_NAME=GranSim WAY_mg_HC_OPTS=-gransim -# Way `dll': -WAY_dll_NAME=Win32 DLLs -WAY_dll_HC_OPTS=-dll - # # Add user-way configurations here: #