X-Git-Url: http://git.megacz.com/?a=blobdiff_plain;f=mk%2Fconfig.mk.in;h=4ba14bafaea51c39c4a8b7245cf14a988ba0e66e;hb=1f95d6db898bc4c92ebb8a8e8f9920d5237bac61;hp=1691db40458ddf31fa1f8decd662f4f175535eb6;hpb=726324537660020a66e5b1afcdda7ab8ada0c640;p=ghc-hetmet.git diff --git a/mk/config.mk.in b/mk/config.mk.in index 1691db4..806908b 100644 --- a/mk/config.mk.in +++ b/mk/config.mk.in @@ -3,57 +3,119 @@ # ################################################################################ # -# config.mk.in-template +# config.mk.in # -# This file defines all the variables that set the configuration of -# a particular build. +# This file supplies defaults for many tweakable build configuration +# options. Some of the defaults are filled in by the autoconf-generated +# configure script. # +# DO NOT EDIT THIS FILE! # -################################################################################ - -# The configuration is defined in two steps: -# -# 1. The builder (i.e. the person doing the build) -# copies this file, config.mk.in-template -# to config.mk.in +# - config.mk is auto-generated from config.mk.in by configure. +# This may be triggered automatically by the build system (say +# if config.mk.in has changed more recently than config.mk), +# so if you edit config.mk your changes will be spammed. # -# 2. S/he then edits it manually (gasp) to reflect any configuration -# options s/he wants. +# - Settings in this file may be overriden by giving replacement +# definitions in build.mk. See build.mk.sample for a good +# starting point for a build.mk file. # -# 3. Then s/he runs "configure", which generates config.mk from -# config.mk.in, substituting for system/platform-dependent things -# enclosed in @at-signs@. +# If you don't have a build.mk file then you get defaults for everything. +# The defaults should provide a reasonable vanilla build. # # This is one of only two files that configure generates (the other is config.h) # -# Note that after subsequent edits of config.mk.in for a build, the configure script -# will have to be re-run manually to have the change reflected in config.mk. + +ifneq "$(findstring 3.7, $(MAKE_VERSION))" "" +ifeq "$(findstring 3.79.1, $(MAKE_VERSION))" "" +$(error GNU make version 3.79.1 or later is required.) +endif +endif + +################################################################################ +# +# GHC Version # -# There is a section below for each project within the fptools suite +# ProjectVersion is treated as a *string* +# ProjectVersionInt is treated as an *integer* (for cpp defines) + +# Versioning scheme: A.B.C +# A: major version, decimal, any number of digits +# B: minor version, decimal, any number of digits +# C: patchlevel, one digit, omitted if zero. # -# PLUS +# ProjectVersionInt does *not* contain the patchlevel (rationale: this +# figure is used for conditional compilations, and library interfaces +# etc. are not supposed to change between patchlevels). # -# a section corresponding to each of the main .mk files -# included by boilerplate.mk (see boilerplate.mk for a list). +# The ProjectVersionInt is included in interface files, and GHC +# checks that it's reading interface generated by the same ProjectVersion +# as itself. It does this even though interface file syntax may not +# change between versions. Rationale: calling conventions or other +# random .o-file stuff might change even if the .hi syntax doesn't +ProjectName = @ProjectName@ +ProjectVersion = @ProjectVersion@ +ProjectVersionInt = @ProjectVersionInt@ +ProjectPatchLevel = @ProjectPatchLevel@ ################################################################################ # -# Project-wide platform variables +# Platform variables # ################################################################################ # A "platform" is the GNU cpu-type/manufacturer/operating-system target machine # specifier. E.g. sparc-sun-solaris2 +# +# Build platform: the platform on which we are doing this build +# Host platform: the platform on which these binaries will run +# Target platform: the platform for which this compiler will generate code +# +# We don't support build & host being different, because the build +# process creates binaries that are run during the build, and also +# installed. +# +# If host & target are different, then we are building a compiler +# which will generate intermediate .hc files to port to the target +# architecture for bootstrapping. The libraries and stage 2 compiler +# will be built as HC files for the target system, and likely won't +# build on this host platform. +# +# An important invariant is that for any piece of source code, the +# platform on which the code is going to run is the HOST platform, +# and the platform on which we are building is the BUILD platform. +# Additionally for the compiler, the platform this compiler will +# generate code for is the TARGET. TARGET is not meaningful outside +# the compiler sources. +# +# Guidelines for when to use HOST vs. TARGET: +# +# - In the build system (Makefile, foo.mk), normally we should test +# $(HOSTPLATFORM). There are some cases (eg. installation), where +# we expect $(HOSTPLATFORM)==$(TARGETPLATFORM), so in those cases it +# doesn't matter which is used. +# +# - In the compiler itself, we should test HOST or TARGET depending +# on whether the conditional relates to the code being generated, or +# the platform on which the compiler is running. See the section +# on "Coding Style" in the commentary for more details. +# +# - In all other code, we should be testing HOST only. +# +# NOTE: cross-compiling is not well supported by the build system. +# You have to do a lot of work by hand to cross compile: see the +# section on "Porting GHC" in the Building Guide. HOSTPLATFORM = @HostPlatform@ TARGETPLATFORM = @TargetPlatform@ -BUILDPLATFORM = @HostPlatform@ +BUILDPLATFORM = @BuildPlatform@ # Hack alert: -# in one or two places, we need to get at the OS version (major and perhaps even minor), -# HostOS_Full is the OS name reported by AC_CANONICAL_SYSTEM. +# in one or two places, we need to get at the OS version (major and +# perhaps even minor), HostOS_Full is the OS name reported by +# AC_CANONICAL_SYSTEM. # HostPlatform_CPP = @HostPlatform_CPP@ HostArch_CPP = @HostArch_CPP@ @@ -61,25 +123,37 @@ HostOS_CPP = @HostOS_CPP@ HostOS_Full = @HostOS_Full@ HostVendor_CPP = @HostVendor_CPP@ -# -# ToDo: check if these can be purged now. -- sof -# +TargetPlatform_CPP = @TargetPlatform_CPP@ +TargetArch_CPP = @TargetArch_CPP@ +TargetOS_CPP = @TargetOS_CPP@ +TargetVendor_CPP = @TargetVendor_CPP@ + +BuildPlatform_CPP = @BuildPlatform_CPP@ +BuildArch_CPP = @BuildArch_CPP@ +BuildOS_CPP = @BuildOS_CPP@ +BuildVendor_CPP = @BuildVendor_CPP@ -@HostPlatform_CPP@_HOST = 1 -@HostPlatform_CPP@_TARGET = 1 -@HostPlatform_CPP@_BUILD = 1 +@HostPlatform_CPP@_HOST = 1 +@TargetPlatform_CPP@_TARGET = 1 +@BuildPlatform_CPP@_BUILD = 1 -@HostArch_CPP@_HOST_ARCH = 1 -@HostArch_CPP@_TARGET_ARCH = 1 -@HostArch_CPP@_BUILD_ARCH = 1 +@HostArch_CPP@_HOST_ARCH = 1 +@TargetArch_CPP@_TARGET_ARCH = 1 +@BuildArch_CPP@_BUILD_ARCH = 1 -@HostOS_CPP@_HOST_OS = 1 -@HostOS_CPP@_TARGET_OS = 1 -@HostOS_CPP@_BUILD_OS = 1 +@HostOS_CPP@_HOST_OS = 1 +@TargetOS_CPP@_TARGET_OS = 1 +@BuildOS_CPP@_BUILD_OS = 1 -@HostVendor_CPP@_HOST_VENDOR = 1 -@HostVendor_CPP@_TARGET_VENDOR = 1 -@HostVendor_CPP@_BUILD_VENDOR = 1 +@HostVendor_CPP@_HOST_VENDOR = 1 +@TargetVendor_CPP@_TARGET_VENDOR = 1 +@BuildVendor_CPP@_BUILD_VENDOR = 1 + +################################################################################ +# +# Global configuration options +# +################################################################################ # Leading underscores on symbol names in object files # Valid options: YES/NO @@ -89,55 +163,31 @@ LeadingUnderscore=@LeadingUnderscore@ # Pin a suffix on executables? If so, what (Windows only). exeext=@exeext@ -################################################################################ -# -# project-wide flags -# -# Set of options applicable to all fptools projects -# -################################################################################ - -# BootingFromHc - build GHC and the libraries from .hc files? -BootingFromHc = @BootingFromHc@ - -# build the libs first if we're bootstrapping from .hc files -ifeq "$(BootingFromHc)" "YES" -AllProjects = glafp-utils hslibs ghc green-card happy hdirect hood nofib +# Windows=YES if on a Windows platform +ifneq "$(findstring $(HostOS_CPP), mingw32 cygwin32)" "" +Windows=YES else -AllProjects = glafp-utils ghc hslibs green-card happy hdirect hood nofib +Windows=NO endif -# -# (OPTIONAL) set ProjectsToBuild to a list of projects to be built. If this -# list is empty, then all projects present in the source tree will be built. -# -ProjectsToBuild = +# BootingFromHc - build GHC and the libraries from .hc files? +BootingFromHc = @BootingFromHc@ -# -# set ProjectsDontInstall to a list of projects which are normally built but -# not installed. -# -ProjectsDontInstall = glafp-utils nofib +# BootingFromUnregisterisedHc - treat .hc files as containing unregisterised +# rather than registerised code, i.e., disable the mangler? +BootingFromUnregisterisedHc = @BootingFromUnregisterisedHc@ # -# Should the various project tests directories be built? +# Which ways should DocBook XML documents be built? +# options are: dvi ps pdf html chm HxS # -IncludeTestDirsInBuild=NO +XMLDocWays= ################################################################################ # -# GHC project -# -# Set of (configurable) options needed by the ghc tree -# plus their default options (if any). -# -################################################################################ - -#--------------------------------------------------------------- -# # Variables that control how the compiler itself is built # -#--------------------------------------------------------------- +################################################################################ # The compiler used to build GHC is $(GHC). To change the actual compiler # used, re-configure with --with-ghc=. @@ -147,17 +197,24 @@ IncludeTestDirsInBuild=NO GhcCompilerWays= # Extra option flags to pass to the compiler that compiles the compiler -# (Ones that are essential are wired into ghc/compiler/Makefile) -# Typical ones: -# -H25m allocate a bigger heap (might speed up compilation) +# (Ones that are essential are wired into compiler/Makefile) +# Typical options to use here: # -# -O compile an optimised compiler -# -# -DDEBUG include consistency/assertion checks in the compiled compiler +# -DDEBUG include debugging code and assertions (will make the +# compiler slower and produce debugging output, but useful +# for development) # # -dcore-lint check the types after every pass of the compiler; -# a pretty strong internal check -GhcHcOpts=-O -Rghc-timing +# a pretty strong internal check of the compiler being +# used to compile GHC. Useful when bootstrapping. +GhcHcOpts=-Rghc-timing + +# Extra options added to specific stages of the compiler bootstrap. +# These are placed later on the command line, and may therefore +# override options from $(GhcHcOpts). +GhcStage1HcOpts= +GhcStage2HcOpts= +GhcStage3HcOpts= # Build a compiler that will build *unregisterised* libraries and # binaries by default. Unregisterised code is supposed to compile and @@ -169,34 +226,53 @@ GhcHcOpts=-O -Rghc-timing # (way 'u') to get unregisterised code, but the default way will be # registerised. # -# NOTE: this is not the same as building the compiler itself -# unregisterised. That's done by either (a) bootstrapping with a -# compiler that was built with GhcUnregisterized=YES, or (b) -# bootstrapping with a compiler that has way 'u' libraries, and the -# flag '-unreg' is added to GhcHcOpts above. +# NOTE: the stage1 compiler will be a registerised binary (assuming +# the compiler you build with is generating registerised binaries), but +# the stage2 compiler will be an unregisterised binary. # +ifneq "$(findstring $(HostArch_CPP), alpha hppa)" "" +GhcUnregisterised=YES +else GhcUnregisterised=NO +endif # Build a compiler with a native code generator backend # (as well as a C backend) # # Target platforms supported: -# i386, alpha & sparc -ifneq "$(findstring $(HostArch_CPP), i386 alpha sparc)" "" +# i386, powerpc +# sparc has bitrotted +# AIX is not supported +ArchSupportsNCG=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc))) +OsSupportsNCG=$(strip $(patsubst $(HostOS_CPP), YES, $(patsubst aix,,$(HostOS_CPP)))) + +ifeq "$(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)" "YESYESNO" GhcWithNativeCodeGen=YES else GhcWithNativeCodeGen=NO endif +# Include support for generating Java +GhcWithJavaGen=NO + HaveLibDL = @HaveLibDL@ -# Include GHCi in the compiler. Default to NO for the time being. +ArchSupportsSMP=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 sparc))) -ifneq "$(findstring $(HostOS_CPP), linux solaris2 freebsd netbsd openbsd)" "" -GhcWithInterpreter=YES -ifeq "$(HaveLibDL)" "YES" -SRC_HC_OPTS += -ldl +ifeq "$(ArchSupportsSMP)$(GhcUnregisterised)" "YESNO" +GhcWithSMP=YES +else +GhcWithSMP=NO endif + +# Whether to include GHCi in the compiler. Depends on whether the RTS linker +# has support for this OS/ARCH combination. + +OsSupportsGHCi=$(strip $(patsubst $(HostOS_CPP), YES, $(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin))) +ArchSupportsGHCi=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc sparc64))) + +ifeq "$(OsSupportsGHCi)$(ArchSupportsGHCi)" "YESYES" +GhcWithInterpreter=YES else GhcWithInterpreter=NO endif @@ -207,8 +283,27 @@ endif BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS))) BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS))) +# Interface file version (hi-boot files only) +# +# A GHC built with HscIfaceFileVersion=n will look for +# M.hi-boot-n, and only then for +# M.hi-boot. +# (It'll be happy with the latter if the former doesn't exist.) +# +# +# This variable is used ONLY for hi-boot files. Its only purpose is +# to allow you to have a single directory with multiple .hi-boot files +# for the same module, each corresponding to a different version of +# GHC. +# +# HscIfaceFileVersion is propagated to hsc via +# compiler/main/Config.hs, which is automatically generated by +# compiler/Makefile. + +HscIfaceFileVersion=6 + #------------------------------------------------------------------------------ -# Options for GHC's Prelude +# Options for Libraries # What extra ways to build the libraries in # In addition to the normal sequential way, the default is to also build @@ -220,127 +315,105 @@ else GhcLibWays=p endif -# Option flags to pass to GHC when it's compiling prelude modules -# *and* standard library modules (std) *and* modules in hslibs -# Typically these are things like -O or -dcore-lint -# The ones that are *essential* are wired into ghc/lib/Makefile +# In addition, the RTS is built in some further variations. Ways that +# make sense here: +# +# thr : threaded +# thr_p : threaded profiled +# debug : debugging (compile with -g for the C compiler, and -DDEBUG) +# debug_p : debugging profiled +# debug_u : debugging unregisterised +# thr_debug : debugging threaded +# thr_debug_p : debugging threaded profiled +# +ifeq "$(BootingFromHc)" "YES" +GhcRTSWays= +else +GhcRTSWays=thr thr_p debug thr_debug +endif + +# Option flags to pass to GHC when it's compiling modules in +# fptools/libraries. Typically these are things like -O or +# -dcore-lint or -H32m. The ones that are *essential* are wired into +# the build system. # # -O is pretty desirable, otherwise no inlining of prelude # things (incl "+") happens when compiling with this compiler +# +# -fgenerics switches on generation of support code for +# derivable type classes. This is now off by default, +# but we switch it on for the libraries so that we generate +# the code in case someone importing wants it -GhcLibHcOpts=-O -Rghc-timing +GhcLibHcOpts=-O -Rghc-timing -fgenerics # Win32 only: Enable the RTS and libraries to be built as DLLs DLLized=@EnableWin32DLLs@ -# Don't split object files for libs if we're building DLLs, or booting from -# .hc files. -SplitObjs=YES - -ifeq "$(DLLized)" "YES" -SplitObjs=NO -endif -ifeq "$(BootingFromHc)" "YES" -SplitObjs=NO -endif - # Strip local symbols from libraries? This can make the libraries smaller, # but makes debugging somewhat more difficult. Doesn't work with all ld's. # StripLibraries=NO -# ---------------------------------------------------------------------------- -# Options for GHC's RTS - -# This is a good way to set things like -optc-g and -optc-DDEBUG for the RTS. -# GhcRtsHcOpts is used when compiling .hc files and .c files. -# GhcRtsCcOpts is used when compiling .c files only. - -# For a debugging RTS: -# GhcRtsHcOpts = -optc-DDEBUG -# GhcRtsCcOpts = -optc-g - -# For an optimised RTS: -GhcRtsHcOpts=-O2 -GhcRtsCcOpts=-O2 -fomit-frame-pointer - -# Include the front panel code? Needs GTK+. -GhcRtsWithFrontPanel = NO -################################################################################ -# -# hslibs project +# ---------------------------------------------------------------------------- +# Object-file splitting # -################################################################################ - -# Build HsLibs for which compiler? - -# If $(HsLibsFor) == hugs or ghc, we assume we're building for the -# compiler/interpreter in the same source tree. - -# HsLibsFor = ghc | hugs | nhc | hbc -HsLibsFor = ghc - -# hslibs for GHC also uses the following variables (defined above): -# GhcLibWays, GhcLibHcOpts, GhcLibToolsHcOpts, DLLized, StripLibraries - -# Haskell compiler options for tools in hslibs -GhcLibToolsHcOpts=-O - -# Build the Haskell Readline bindings? +# Set SplitObjs=YES or NO in your build.mk # -GhcLibsWithReadline=@HaveReadlineHeaders@ - -# Libraries needed for linking with readline -LibsReadline=@LibsReadline@ +# Don't use -split-objs in in GhcLibHcOpts, because the build +# system needs to do other special magic if you are +# doing object-file splitting +ifneq "$(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc)" "" +SplitObjs=YES +else +SplitObjs=NO +endif -# Include path to readline.h -# (no path == in standard include path) -# -ReadlineIncludePath= +# Don't split object files for libs if we're building DLLs, or booting from +# .hc files. +ifeq "$(DLLized)" "YES" +SplitObjs=NO +endif +ifeq "$(BootingFromHc)" "YES" +SplitObjs=NO +endif +ifeq "$(GhcUnregisterised)" "YES" +SplitObjs=NO +endif +ifeq "$(TargetArch_CPP)" "ia64" +SplitObjs=NO +endif # Math library LIBM=@LIBM@ -# Build the Haskell OpenGL/GLUT binding? +# Build the ObjectIO ? # -GhcLibsWithHOpenGL=@GhcLibsWithHOpenGL@ +GhcLibsWithObjectIO=@GhcLibsWithObjectIO@ -################################################################################ -# -# happy project +# .NET interop support? # -# Happy specific options -# -################################################################################ +DotnetSupport=@DotnetSupport@ -# The compiler you'd like to use to compile Happy -WithHappyHc = @WithHc@ - -# HappyHcOpts gives the flags to pass to the Haskell compiler used -# to compile the Happy sources with. +# Build unix package? # -HappyHcOpts = -O +GhcLibsWithUnix=@GhcLibsWithUnix@ -################################################################################ -# -# haggis project -# -# Haggis specific options -# -################################################################################ +# ---------------------------------------------------------------------------- +# Options for GHC's RTS -################################################################################ -# -# green-card project -# -# Green-card specific options -# -################################################################################ +# For an optimised RTS (you probably don't want to change these; we build +# a debugging RTS by default now. Use -debug to get it). +GhcRtsHcOpts=-optc-O2 +GhcRtsCcOpts=-fomit-frame-pointer + +# Include the front panel code? Needs GTK+. +GhcRtsWithFrontPanel = NO ################################################################################ # -# nofib project +# nofib # # nofib specific options # @@ -367,13 +440,8 @@ NoFibWays = $(GhcLibWays) # Haskell compiler options for nofib NoFibHcOpts = -O -# ============================================================================== -# -# END OF PROJECT-SPECIFIC STUFF -# -# Now come the generic configuration options -# -# ============================================================================== +# Number of times to run each program +NoFibRuns = 5 ################################################################################ # @@ -393,21 +461,16 @@ NoFibHcOpts = -O DEFAULT_TMPDIR = /tmp ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32" -DEFAULT_TMPDIR = C:/TEMP +DEFAULT_TMPDIR = /C/TEMP endif ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" -DEFAULT_TMPDIR = C:/TEMP +DEFAULT_TMPDIR = /C/TEMP endif -# FPTOOLS_TOP: the top of the fptools hierarchy, absolute path. - -ifeq "$(findstring $(TARGETPLATFORM), i386-unknown-cygwin32 i386-unknown-mingw32)" "" +# FPTOOLS_TOP: the top of the fptools hierarchy, absolute path. (POSIX / unix-style path). FPTOOLS_TOP_ABS = @hardtop@ -else -FPTOOLS_TOP_ABS = $(subst \,/,$(shell cygpath -w @hardtop@)) -endif -# Keep the Unix-style path to use with Unix tools (e.g. in ghc-inplace script) -FPTOOLS_TOP_ABS_UNIX = @hardtop@ +# The platform specific version of 'hardtop'. +FPTOOLS_TOP_ABS_PLATFORM = @hardtop_plat@ # # Installation directories, we don't use half of these, @@ -417,18 +480,37 @@ FPTOOLS_TOP_ABS_UNIX = @hardtop@ prefix = @prefix@ exec_prefix = @exec_prefix@ bindir = @bindir@ -datadir = @datadir@ -#sysconfdir = @datadir@ -#sharedstatedir = @sharedstatedir@ -#localstatedir = @localstatedir@ -libdir = @libdir@ +datadir0 = @datadir@ +libdir0 = @libdir@ includedir = @includedir@ oldincludedir = @oldincludedir@ mandir = @mandir@ -#UNUSED, see below: libexecdir = @libexecdir@ -#UNUSED:infodir = @infodir@ -#UNUSED:srcdir = @srcdir@ +ifeq "$(Windows)" "YES" + +ifeq "$(strip $(prefix))" "" +prefix = /c/ghc +endif + +# Hack: our directory layouts tend to be different on Windows, so +# hack around configure's bogus assumptions here. +datadir = $(prefix) +libdir = $(prefix) + +else + +# +# Unix: override libdir and datadir to put ghc-specific stuff in +# a subdirectory with the version number included. +# +libdir = $(libdir0)/ghc-$(ProjectVersion) +datadir = $(datadir0)/ghc-$(ProjectVersion) + +endif # Windows + +# Default place for putting interface files is $(libdir) +# (overriden for packages in package.mk) +ifacedir = $(libdir) # # Default values for most of the above are only set if @@ -467,12 +549,31 @@ ifeq "$(strip $(mandir))" "" mandir = $(prefix)/man endif +#----------------------------------------------------------------------------- +# install configuration + +# +# Set this to have files installed with a specific owner +# +INSTALL_OWNER = + +# +# Set this to have files installed with a specific group +# +INSTALL_GROUP = -################################################################################ # -# Utilities programs: flags +# Invocations of `install' for the four different classes +# of targets: # -################################################################################ +INSTALL_PROGRAM = $(INSTALL) -m 755 +INSTALL_SCRIPT = $(INSTALL) -m 755 +INSTALL_SHLIB = $(INSTALL) -m 755 +INSTALL_DATA = $(INSTALL) -m 644 +INSTALL_DIR = $(MKDIRHIER) + +# ----------------------------------------------------------------------------- +# Utilities programs: flags # If you want to give any standard flags to pretty much any utility # (see utils.mk for a complete list), by adding a line here @@ -484,6 +585,8 @@ endif # # SRC_HC_OPTS += -O +SRC_HC_OPTS += -H16m -O + # These flags make flex 8-bit SRC_FLEX_OPTS += -8 @@ -502,52 +605,141 @@ GC_CPP_OPTS += -P -E -x c -traditional -D__GLASGOW_HASKELL__ ################################################################################ # -# Utilities programs: where to find them +# Layout of the source tree # ################################################################################ -#----------------------------------------------------------------------------- -# FPtools Utility locations - -# By default, the various utils needed to be build ghc and chums -# is set up to point to the utils/ directory. Define here the -# path prefix for the utilities. Notice that it's a prefix with -# a trailing slash, so that it can be concatenated directly on -# front of a program name; if it's not set then we just look -# along the shell's $(PATH) -# -# If instead you want to use installed or your own versions of these, -# override the various *_PREFIX in build.mk, i.e., having the following -# in build.mk: -# -# MKDEPENDC_PREFIX= -# -# will force `make' to rummage around in your PATH to find `mkdependC' (not -# sure it would need it in the first place, but still). -# -GLAFP_UTILS = $(FPTOOLS_TOP)/glafp-utils - -SCRIPT_PREFIX = $(GLAFP_UTILS)/scripts/ -MKDEPENDC_PREFIX = $(GLAFP_UTILS)/mkdependC/ -LTX_PREFIX = $(GLAFP_UTILS)/ltx/ -RUNTEST_PREFIX = $(GLAFP_UTILS)/runstdtest/ -VERBATIM_PREFIX = $(GLAFP_UTILS)/verbatim/ -SGMLVERB_PREFIX = $(GLAFP_UTILS)/sgmlverb/ -ETAGS_PREFIX = $(GLAFP_UTILS)/etags/ -MSUB_PREFIX = $(GLAFP_UTILS)/msub/ -LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/ -MKDIRHIER_PREFIX = $(GLAFP_UTILS)/mkdirhier/ -DOCBOOK_PREFIX = $(GLAFP_UTILS)/docbook/ +# Here we provide defines for the various directories in the source tree, +# so we can move things around more easily. A define $(GHC_FOO_DIR_REL) +# indicates a directory relative to the top of the source tree, whereas +# $(GHC_FOO_DIR) is a directory relative to the current directory. +# $(GHC_FOO_DIR_ABS) is the absolute path to the directory. + +GHC_UTILS_DIR_REL = utils +GHC_INCLUDE_DIR_REL = includes +GHC_COMPILER_DIR_REL = compiler +GHC_RTS_DIR_REL = rts +GHC_UTILS_DIR_REL = utils +GHC_DRIVER_DIR_REL = driver +GHC_COMPAT_DIR_REL = compat + +GHC_MKDEPENDC_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdependC +GHC_LTX_DIR_REL = $(GHC_UTILS_DIR_REL)/ltx +GHC_RUNTEST_DIR_REL = $(GHC_UTILS_DIR_REL)/runstdtest +GHC_LNDIR_DIR_REL = $(GHC_UTILS_DIR_REL)/lndir +GHC_MKDIRHIER_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdirhier +GHC_DOCBOOK_DIR_REL = $(GHC_UTILS_DIR_REL)/docbook +GHC_UNLIT_DIR_REL = $(GHC_UTILS_DIR_REL)/unlit +GHC_HP2PS_DIR_REL = $(GHC_UTILS_DIR_REL)/hp2ps +GHC_HSTAGS_DIR_REL = $(GHC_UTILS_DIR_REL)/hasktags +GHC_HSC2HS_DIR_REL = $(GHC_UTILS_DIR_REL)/hsc2hs +GHC_TOUCHY_DIR_REL = $(GHC_UTILS_DIR_REL)/touchy +GHC_PKG_DIR_REL = $(GHC_UTILS_DIR_REL)/ghc-pkg +GHC_GENPRIMOP_DIR_REL = $(GHC_UTILS_DIR_REL)/genprimopcode +GHC_GENAPPLY_DIR_REL = $(GHC_UTILS_DIR_REL)/genapply + +GHC_MANGLER_DIR_REL = $(GHC_DRIVER_DIR_REL)/mangler +GHC_SPLIT_DIR_REL = $(GHC_DRIVER_DIR_REL)/split +GHC_SYSMAN_DIR_REL = $(GHC_RTS_DIR_REL)/parallel + +GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL) +GHC_INCLUDE_DIR = $(FPTOOLS_TOP)/$(GHC_INCLUDE_DIR_REL) +GHC_COMPILER_DIR = $(FPTOOLS_TOP)/$(GHC_COMPILER_DIR_REL) +GHC_RTS_DIR = $(FPTOOLS_TOP)/$(GHC_RTS_DIR_REL) +GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL) +GHC_DRIVER_DIR = $(FPTOOLS_TOP)/$(GHC_DRIVER_DIR_REL) +GHC_COMPAT_DIR = $(FPTOOLS_TOP)/$(GHC_COMPAT_DIR_REL) + +GHC_MKDEPENDC_DIR = $(FPTOOLS_TOP)/$(GHC_MKDEPENDC_DIR_REL) +GHC_LTX_DIR = $(FPTOOLS_TOP)/$(GHC_LTX_DIR_REL) +GHC_RUNTEST_DIR = $(FPTOOLS_TOP)/$(GHC_RUNTEST_DIR_REL) +GHC_LNDIR_DIR = $(FPTOOLS_TOP)/$(GHC_LNDIR_DIR_REL) +GHC_MKDIRHIER_DIR = $(FPTOOLS_TOP)/$(GHC_MKDIRHIER_DIR_REL) +GHC_DOCBOOK_DIR = $(FPTOOLS_TOP)/$(GHC_DOCBOOK_DIR_REL) +GHC_UNLIT_DIR = $(FPTOOLS_TOP)/$(GHC_UNLIT_DIR_REL) +GHC_HP2PS_DIR = $(FPTOOLS_TOP)/$(GHC_HP2PS_DIR_REL) +GHC_HSTAGS_DIR = $(FPTOOLS_TOP)/$(GHC_HSTAGS_DIR_REL) +GHC_HSC2HS_DIR = $(FPTOOLS_TOP)/$(GHC_HSC2HS_DIR_REL) +GHC_TOUCHY_DIR = $(FPTOOLS_TOP)/$(GHC_TOUCHY_DIR_REL) +GHC_PKG_DIR = $(FPTOOLS_TOP)/$(GHC_PKG_DIR_REL) +GHC_GENPRIMOP_DIR = $(FPTOOLS_TOP)/$(GHC_GENPRIMOP_DIR_REL) +GHC_GENAPPLY_DIR = $(FPTOOLS_TOP)/$(GHC_GENAPPLY_DIR_REL) + +GHC_MANGLER_DIR = $(FPTOOLS_TOP)/$(GHC_MANGLER_DIR_REL) +GHC_SPLIT_DIR = $(FPTOOLS_TOP)/$(GHC_SPLIT_DIR_REL) +GHC_SYSMAN_DIR = $(FPTOOLS_TOP)/$(GHC_SYSMAN_DIR_REL) + +GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL) +GHC_INCLUDE_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_INCLUDE_DIR_REL) +GHC_COMPILER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPILER_DIR_REL) +GHC_RTS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RTS_DIR_REL) +GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL) +GHC_DRIVER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DRIVER_DIR_REL) +GHC_COMPAT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPAT_DIR_REL) + +GHC_MKDEPENDC_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDEPENDC_DIR_REL) +GHC_LTX_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LTX_DIR_REL) +GHC_RUNTEST_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RUNTEST_DIR_REL) +GHC_LNDIR_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LNDIR_DIR_REL) +GHC_MKDIRHIER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDIRHIER_DIR_REL) +GHC_DOCBOOK_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DOCBOOK_DIR_REL) +GHC_UNLIT_DIR = $(FPTOOLS_TOP_ABS)/$(GHC_UNLIT_DIR_REL) +GHC_HP2PS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HP2PS_DIR_REL) +GHC_HSTAGS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSTAGS_DIR_REL) +GHC_HSC2HS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSC2HS_DIR_REL) +GHC_TOUCHY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_TOUCHY_DIR_REL) +GHC_PKG_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_PKG_DIR_REL) +GHC_GENPRIMOP_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENPRIMOP_DIR_REL) +GHC_GENAPPLY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENAPPLY_DIR_REL) + +GHC_MANGLER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MANGLER_DIR_REL) +GHC_SYSMAN_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SYSMAN_DIR_REL) +GHC_SPLIT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SPLIT_DIR_REL) + +# ----------------------------------------------------------------------------- +# Names of programs in the GHC tree +# +# xxx_PGM the name of an executable, without the path +# xxx the executable relative to the current dir + +GHC_UNLIT_PGM = unlit$(exeext) +GHC_HSTAGS_PGM = hasktags +GHC_HSC2HS_INPLACE_PGM = hsc2hs-inplace +GHC_TOUCHY_PGM = touchy$(exeext) +GHC_MANGLER_PGM = ghc-asm +GHC_SPLIT_PGM = ghc-split +GHC_SYSMAN_PGM = SysMan +GHC_PKG_INPLACE_PGM = ghc-pkg-inplace +GHC_GENPRIMOP_PGM = genprimopcode +GHC_GENAPPLY_PGM = genapply +GHC_MKDEPENDC_PGM = mkdependC +GHC_LTX_PGM = ltx +GHC_MKDIRHIER_PGM = mkdirhier +GHC_LNDIR_PGM = lndir +GHC_RUNTEST_PGM = runstdtest -LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/ - -HAPPY_PREFIX = $(FPTOOLS_TOP)/happy/src/ -GREENCARD_PREFIX = $(FPTOOLS_TOP)/green-card/src/ +ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" +GHC_CP = "xcopy /y" +GHC_PERL = perl +else +GHC_CP = $(CP) +GHC_PERL = $(PERL) +endif -UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/ -HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/ -HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hstags/ -HSC2HS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hsc2hs/ +UNLIT = $(GHC_UNLIT_DIR)/$(GHC_UNLIT_PGM) +HSTAGS = $(GHC_HSTAGS_DIR)/$(GHC_HSTAGS_PGM) +HSC2HS_INPLACE = $(GHC_HSC2HS_DIR)/$(GHC_HSC2HS_INPLACE_PGM) +MANGLER = $(GHC_MANGLER_DIR)/$(GHC_MANGLER_PGM) +SPLIT = $(GHC_SPLIT_DIR)/$(GHC_SPLIT_PGM) +SYSMAN = $(GHC_SYSMAN_DIR)/$(GHC_SYSMAN_PGM) +GHC_PKG_INPLACE = $(GHC_PKG_DIR)/$(GHC_PKG_INPLACE_PGM) +GENPRIMOP = $(GHC_GENPRIMOP_DIR)/$(GHC_GENPRIMOP_PGM) +GENAPPLY = $(GHC_GENAPPLY_DIR)/$(GHC_GENAPPLY_PGM) +MKDEPENDC = $(GHC_MKDEPENDC_DIR)/$(GHC_MKDEPENDC_PGM) +LTX = $(GHC_LTX_DIR)/$(GHC_LTX_PGM) +MKDIRHIER = $(GHC_MKDIRHIER_DIR)/$(GHC_MKDIRHIER_PGM) +LNDIR = $(GHC_LNDIR_DIR)/$(GHC_LNDIR_PGM) +RUNTEST = $(GHC_RUNTEST_DIR)/$(GHC_RUNTEST_PGM) #----------------------------------------------------------------------------- # Haskell compilers and mkdependHS @@ -562,42 +754,92 @@ HSC2HS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hsc2hs/ # (because the version numbers have to be calculated). GHC = @WithGhc@ -GhcVersion = @GhcVersion@ -GhcMajVersion = @GhcMajVersion@ -GhcMinVersion = @GhcMinVersion@ -GhcPatchLevel = @GhcPatchLevel@ +GhcDir = $(dir $(GHC)) + +# Set to YES if $(GHC) has the readline package installed +GhcHasReadline = @GhcHasReadline@ HBC = @HBC@ NHC = @NHC@ +# Sometimes we want to invoke ghc from the build tree in different +# places (eg. it's handy to have a nofib & a ghc build in the same +# tree). We can refer to "this ghc" as $(GHC_INPLACE): + +GHC_INPLACE = $(GHC_COMPILER_DIR)/ghc-inplace +GHC_STAGE1 = $(GHC_COMPILER_DIR)/stage1/ghc-inplace +GHC_STAGE2 = $(GHC_COMPILER_DIR)/stage2/ghc-inplace +GHC_STAGE3 = $(GHC_COMPILER_DIR)/stage3/ghc-inplace + +ifneq "$(findstring YES, $(UseStage1) $(BootingFromHc))" "" + +# We are using the stage1 compiler to compile Haskell code, set up +# some variables appropriately: +HC =$(GHC_STAGE1) +MKDEPENDHS =$(GHC_STAGE1) +GhcVersion = @ProjectVersion@ +GhcPatchLevel = @ProjectPatchLevel@ +# oops, these are wrong: +GhcMajVersion = @GhcMajVersion@ +GhcMinVersion = @GhcMinVersion@ + +ghc_ge_504 = YES +ghc_ge_601 = YES +ghc_ge_602 = YES +ghc_ge_603 = YES +ghc_ge_605 = YES + +else # not UseStage1 or BootingFromHc + HC = @WithHc@ MKDEPENDHS = $(GHC) +GhcVersion = @GhcVersion@ +GhcPatchLevel = @GhcPatchLevel@ +GhcMajVersion = @GhcMajVersion@ +GhcMinVersion = @GhcMinVersion@ -# Sometimes we want to invoke ghc from the build tree in different -# projects (eg. it's handy to have a nofib & a ghc build in the same -# tree). We can refer to "this ghc" as $(GHC_INPLACE): +# Some useful GHC version predicates: +ghc_ge_504 = $(shell if (test $(GhcCanonVersion) -ge 504); then echo YES; else echo NO; fi) +ghc_ge_601 = $(shell if (test $(GhcCanonVersion) -ge 601); then echo YES; else echo NO; fi) +ghc_ge_602 = $(shell if (test $(GhcCanonVersion) -ge 602); then echo YES; else echo NO; fi) +ghc_ge_603 = $(shell if (test $(GhcCanonVersion) -ge 603); then echo YES; else echo NO; fi) +ghc_ge_605 = $(shell if (test $(GhcCanonVersion) -ge 605); then echo YES; else echo NO; fi) +endif -GHC_INPLACE = $(FPTOOLS_TOP)/ghc/compiler/ghc-inplace +# Canonicalised ghc version number, used for easy (integer) version +# comparisons. We must expand $(GhcMinVersion) to two digits by +# adding a leading zero if necessary: +ifneq "$(findstring $(GhcMinVersion), 0 1 2 3 4 5 6 7 8 9)" "" +GhcCanonVersion = $(GhcMajVersion)0$(GhcMinVersion) +else +GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion) +endif #----------------------------------------------------------------------------- # C compiler # -# +# NB. Don't override $(WhatGccIsCalled) using build.mk, re-configure using +# the flag --with-gcc= instead. The reason is that the configure script +# needs to know which gcc you're using in order to perform its tests. + HaveGcc = @HaveGcc@ UseGcc = YES WhatGccIsCalled = @WhatGccIsCalled@ +GccVersion = @GccVersion@ ifeq "$(strip $(HaveGcc))" "YES" ifneq "$(strip $(UseGcc))" "YES" CC = cc else CC = $(WhatGccIsCalled) + GccDir = $(dir $(WhatGccIsCalled)) endif endif # default C compiler flags -SRC_CC_OPTS = -O -ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" -SRC_CC_OPTS += -mno-cygwin -mwin32 +SRC_CC_OPTS = @SRC_CC_OPTS@ + +ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux" +SRC_CC_OPTS += -G0 endif #----------------------------------------------------------------------------- @@ -607,43 +849,42 @@ HaveLibGmp = @HaveLibGmp@ LibGmp = @LibGmp@ #----------------------------------------------------------------------------- -# Regex library -# (if present in libc use that one, otherwise use the one in the tree) +# GMP framework (Mac OS X) # -HaveRegex = @HaveRegex@ +HaveFrameworkGMP = @HaveFrameworkGMP@ #----------------------------------------------------------------------------- -# GTK+ - -GTK_CONFIG = @GTK_CONFIG@ -GTK_VERSION = @GTK_VERSION@ +# Mingwex Library +# +HaveLibMingwEx = @HaveLibMingwEx@ #----------------------------------------------------------------------------- -# Flex +# Flex (currently unused, could be moved to glafp-utils) -FLEX = @LEX@ +# FLEX = @LEX@ # Don't bother with -lfl, we define our own yywrap()s anyway. -FLEX_LIB = +# FLEX_LIB = #WAS:FLEX_LIB = @LEXLIB@ #----------------------------------------------------------------------------- # Other standard (ha!) Unix utilities AR = @ArCmd@ +ArSupportsInput = @ArSupportsInput@ # Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!! BASH = /usr/local/bin/bash -# -# Could be either gzip or compress -# -COMPRESS = @CompressCmd@ -COMPRESS_SUFFIX = @CompressSuffix@ CONTEXT_DIFF = @ContextDiffCmd@ CP = cp -CPP = @CPP@ +CPP = @CPP@ @CPPFLAGS@ CTAGS = $(ETAGS) -RAWCPP = $(CPP) -undef -traditional +# +# RAWCPP_FLAGS are the flags to give to cpp (viz, gcc -E) to persuade it to +# behave plausibly on Haskell sources. +# +RAWCPP_FLAGS = -undef -traditional FIND = @FindCmd@ +SORT = @SortCmd@ INSTALL = @INSTALL@ # # Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback @@ -660,13 +901,25 @@ MSMACROS = -ms MV = mv NROFF = nroff PERL = @PerlCmd@ +PYTHON = @PythonCmd@ PIC = pic PREPROCESSCMD = $(CC) -E -PRINTER = lpr RANLIB = @RANLIB@ RM = rm -f SED = @SedCmd@ SHELL = /bin/sh + +LD = @LdCmd@ + +# Some ld's support the -x flag and some don't, so the configure +# script detects which we have and sets LdXFlag to "-x" or "" +# respectively. +LD_X = @LdXFlag@ + +# GNU ld supports input via a linker script, which is useful to avoid +# overflowing command-line length limits. +LdIsGNULd = @LdIsGNULd@ + # # In emergency situations, REAL_SHELL is used to perform shell commands # from within the ghc driver script, by scribbling the command line to @@ -675,7 +928,7 @@ SHELL = /bin/sh # The reason for having to do this is that overly long command lines # cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris # 2.5.1), which is why this backdoor is provided. The situation of overly -# long command lines is either encountered while doing `make boot' in ghc/compiler, +# long command lines is either encountered while doing `make boot' in compiler/, # or when linking the compiler binary (`hsc'). # # We do not use SHELL to execute long commands, as `make' will more than likely @@ -696,11 +949,6 @@ TAR = @TarCmd@ ZIP = zip # -# Under Windows, we have to deal with .exe suffixes -# -EXE_SUFFIX=@exeext@ - -# # This is special to literate/, ToDo: add literate-specific # configure setup to literate/. # @@ -713,47 +961,49 @@ TIB = tib TIME = @TimeCmd@ TROFF = troff UNAME = uname -YACC = @YaccCmd@ - -#----------------------------------------------------------------------------- -# SGML stuff -JADE = @JadeCmd@ +# GTK+ +GTK_CONFIG = @GTK_CONFIG@ -SGML2DVI = $(DOCBOOK_PREFIX)db2dvi -SGML2HTML = $(DOCBOOK_PREFIX)db2html -SGML2PS = $(DOCBOOK_PREFIX)db2ps -SGML2PDF = $(DOCBOOK_PREFIX)db2pdf -SGML2RTF = $(DOCBOOK_PREFIX)db2rtf +#----------------------------------------------------------------------------- +# DocBook XML stuff -SGMLSTYLESHEET = $(FPTOOLS_TOP_ABS)/docs/fptools-both.dsl +XSLTPROC = @XsltprocCmd@ +XMLLINT = @XmllintCmd@ +FOP = @FopCmd@ +XMLTEX = @XmltexCmd@ +PDFXMLTEX = @PdfxmltexCmd@ +DVIPS = @DvipsCmd@ -SRC_SGML2DVI_OPTS = -d $(SGMLSTYLESHEET) -SRC_SGML2HTML_OPTS = -d $(SGMLSTYLESHEET) -SRC_SGML2PS_OPTS = -d $(SGMLSTYLESHEET) -SRC_SGML2RTF_OPTS = -d $(SGMLSTYLESHEET) +DIR_DOCBOOK_XSL = @DIR_DOCBOOK_XSL@ -DOCBOOK_CATALOG = @Catalog@ +XSLTPROC_LABEL_OPTS = --stringparam toc.section.depth 3 \ + --stringparam section.autolabel 1 \ + --stringparam section.label.includes.component.label 1 #----------------------------------------------------------------------------- # FPtools support software -# Stuff from fptools/glafp-utils -MKDEPENDC = $(MKDEPENDC_PREFIX)mkdependC -LTX = $(LTX_PREFIX)ltx -MKDIRHIER = $(MKDIRHIER_PREFIX)mkdirhier -LNDIR = $(LNDIR_PREFIX)lndir -MSUB = $(MSUB_PREFIX)msub -ETAGS = $(ETAGS_PREFIX)etags -VERBATIM = $(VERBATIM_PREFIX)verbatim -SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb -RUNTEST = $(RUNTEST_PREFIX)runstdtest -LX = @LxCmd@ -GREENCARD = $(FPTOOLS_TOP)/green-card/src/green-card - BLD_DLL = dllwrap # +# .NET support software +# +ILX2IL = ilx2il +ILASM = ilasm + +# +# ghc-pkg +# +GHC_PKG = @GhcPkgCmd@ + +# +# GreenCard +# +GREENCARD = @GreenCardCmd@ +GREENCARD_VERSION = @GreenCardVersion@ + +# # Happy # HAPPY = @HappyCmd@ @@ -761,31 +1011,29 @@ HAPPY_VERSION = @HappyVersion@ # # Options to pass to Happy when we're going to compile the output with GHC # -GHC_HAPPY_OPTS = $(shell if ( test `echo $(HAPPY_VERSION) | sed -e "s/\(.*\)\..*/\1/g"` "-gt" "1" || test `echo $(HAPPY_VERSION) | sed -e "s/.*\.\(.*\)/\1/g"` "-ge" "9" ); then echo -agc; else echo -g; fi) +GHC_HAPPY_OPTS = -agc + +# Temp. to work around performance problems in the HEAD around 8/12/2003, +# A Happy compiled with this compiler needs more stack. +SRC_HAPPY_OPTS = +RTS -K2m -RTS # -# Stuff from fptools/literate +# Alex # -LIT2PGM = $(LITERATE_PREFIX)lit2pgm -LIT2HTML = $(LITERATE_PREFIX)lit2html -LIT2LATEX = $(LITERATE_PREFIX)lit2latex -MKDEPENDLIT = $(LITERATE_PREFIX)mkdependlit -LIT2CHANGELOG = $(LITERATE_PREFIX)lit2changelog -LIT2TEXT = $(LITERATE_PREFIX)lit2text - +ALEX = @AlexCmd@ +ALEX_VERSION = @AlexVersion@ # -# Stuff from fptools/ghc/utils +# Options to pass to Happy when we're going to compile the output with GHC +# +GHC_ALEX_OPTS = -g + # -UNLIT = $(UNLIT_PREFIX)unlit$(EXE_SUFFIX) -HP2PS = $(HP2PS_PREFIX)hp2ps$(EXE_SUFFIX) -HSTAGS = $(HSTAGS_PREFIX)hstags -HSC2HS = $(HSC2HS_PREFIX)hsc2hs-inplace +# Haddock +# +HADDOCK = @HaddockCmd@ # -# Options for the compiling different `ways'. Various projects within -# the glorious fptools tree support building in various user-configured -# ways. For instance, you could set up one `way' such that the prelude -# libraries all were built with the option -ffoldr-build-on. +# Options for compiling in different `ways'. # # To configure up your own way, have a look at some of the standard ways # such as profiling, and create your own set of WAY_*_OPTS defs below. @@ -795,15 +1043,6 @@ HSC2HS = $(HSC2HS_PREFIX)hsc2hs-inplace # # -# IMPORTANT! The WAYS variable configures the different `ways' -# you want to build a project (or maybe just parts of it, as is -# the case for ghc/). This variable is intended set inside the -# project mk setup, enforcing a global fptools WAYS is a bit too -# much (do you *really* want to build glafp-utils the profiled-concurrent -# way?) -# - -# # Definitions of the different ways: # # * their name: @@ -818,16 +1057,20 @@ HSC2HS = $(HSC2HS_PREFIX)hsc2hs-inplace # The ways currently defined. # ALL_WAYS=p t u s mp mg a b c d e f g h i j k l m n o A B -USER_WAYS=a b c d e f g h i j k l m n o A B +USER_WAYS=a b c d e f g h j k l m n o A B # # The following ways currently have treated specially, p u t mg, # as the driver script treats these guys specially and needs to carefully be told # about the options for these. Hence, we hide the required command line options -# for these in the ghc/driver, as this is the only place they are needed. +# for these in the driver, as this is the only place they are needed. # # If you want to add to these default options, fill in the variables below: +# Way 'i': +WAY_i_NAME=ILX +WAY_i_HC_OPTS= -filx -fruntime-types + # Way 'p': WAY_p_NAME=profiling WAY_p_HC_OPTS= -prof @@ -840,10 +1083,6 @@ WAY_t_HC_OPTS= -ticky WAY_u_NAME=unregisterized (using portable C only) WAY_u_HC_OPTS=-unreg -# Way `s': -WAY_s_NAME=threads (for SMP) -WAY_s_HC_OPTS=-smp - # Way `mp': WAY_mp_NAME=parallel WAY_mp_HC_OPTS=-parallel @@ -853,6 +1092,38 @@ WAY_mg_NAME=GranSim WAY_mg_HC_OPTS=-gransim # +# These ways apply to the RTS only: +# + +# Way 'thr': +WAY_thr_NAME=threaded +WAY_thr_HC_OPTS=-optc-DTHREADED_RTS + +# Way 'thr_p': +WAY_thr_p_NAME=threaded profiled +WAY_thr_p_HC_OPTS=-optc-DTHREADED_RTS -prof + +# Way 'debug': +WAY_debug_NAME=debug +WAY_debug_HC_OPTS=-optc-DDEBUG + +# Way 'debug_p': +WAY_debug_p_NAME=debug profiled +WAY_debug_p_HC_OPTS=-optc-DDEBUG -prof + +# Way 'debug_u': +WAY_debug_u_NAME=debug unregisterised +WAY_debug_u_HC_OPTS=-optc-DDEBUG -unreg + +# Way 'thr_debug': +WAY_thr_debug_NAME=threaded +WAY_thr_debug_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG + +# Way 'thr_debug_p': +WAY_thr_debug_p_NAME=threaded +WAY_thr_debug_p_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -prof + +# # Add user-way configurations here: # WAY_A_NAME= @@ -885,9 +1156,6 @@ WAY_g_HC_OPTS= WAY_h_NAME= WAY_h_HC_OPTS= -WAY_i_NAME= -WAY_i_HC_OPTS= - WAY_j_NAME= WAY_j_HC_OPTS= @@ -905,3 +1173,23 @@ WAY_n_HC_OPTS= WAY_o_NAME= WAY_o_HC_OPTS= + +################################################################################ +# +# 31-bit-Int Core files +# +################################################################################ + +# +# It is possible to configure the compiler and prelude to support 31-bit +# integers, suitable for a back-end and RTS using a tag bit on a 32-bit +# architecture. Currently the only useful output from this option is external Core +# files. The following additions to your build.mk will produce the +# 31-bit core output. Note that this is *not* just a library "way"; the +# compiler must be built a special way too. + +# GhcCppOpts +=-DWORD_SIZE_IN_BITS=31 +# GhcLibHcOpts +=-fext-core -fno-code -DWORD_SIZE_IN_BITS=31 +# GhcLibCppOpts += -DWORD_SIZE_IN_BITS=31 +# SplitObjs=NO +