X-Git-Url: http://git.megacz.com/?a=blobdiff_plain;f=mk%2Fconfig.mk.in;h=83e28869967ad0c61c77cbe07d900bbf2076db8d;hb=beb5737b7ee42c4e9373a505e7d957206d69a30e;hp=8b5879e7216781c0f84125e11791c3bfcf42f416;hpb=279826fcdd5d8e53e87c03d2f49355b6138a0efc;p=ghc-hetmet.git diff --git a/mk/config.mk.in b/mk/config.mk.in index 8b5879e..931c4f5 100644 --- a/mk/config.mk.in +++ b/mk/config.mk.in @@ -3,33 +3,28 @@ # ################################################################################ # -# config.mk.in-template +# config.mk.in # -# This file defines all the variables that set the configuration of -# a particular build. +# This file supplies defaults for many tweakable build configuration +# options. Some of the defaults are filled in by the autoconf-generated +# configure script. # +# DO NOT EDIT THIS FILE! # -################################################################################ - -# The configuration is defined in two steps: +# - config.mk is auto-generated from config.mk.in by configure. +# This may be triggered automatically by the build system (say +# if config.mk.in has changed more recently than config.mk), +# so if you edit config.mk your changes will be spammed. # -# 1. The builder (i.e. the person doing the build) -# copies this file, config.mk.in-template -# to config.mk.in +# - Settings in this file may be overriden by giving replacement +# definitions in build.mk. See build.mk.sample for a good +# starting point for a build.mk file. # -# 2. S/he then edits it manually (gasp) to reflect any configuration -# options s/he wants. -# -# 3. Then s/he runs "configure", which generates config.mk from -# config.mk.in, substituting for system/platform-dependent things -# enclosed in @at-signs@. +# If you don't have a build.mk file then you get defaults for everything. +# The defaults should provide a reasonable vanilla build. # # This is one of only two files that configure generates (the other is config.h) # -# Note that after subsequent edits of config.mk.in for a build, the configure script -# will have to be re-run manually to have the change reflected in config.mk. -# - # There is a section below for each project within the fptools suite # # PLUS @@ -37,6 +32,11 @@ # a section corresponding to each of the main .mk files # included by boilerplate.mk (see boilerplate.mk for a list). +ifneq "$(findstring 3.7, $(MAKE_VERSION))" "" +ifeq "$(findstring 3.79.1, $(MAKE_VERSION))" "" +$(error GNU make version 3.79.1 or later is required.) +endif +endif ################################################################################ # @@ -46,14 +46,54 @@ # A "platform" is the GNU cpu-type/manufacturer/operating-system target machine # specifier. E.g. sparc-sun-solaris2 +# +# Build platform: the platform on which we are doing this build +# Host platform: the platform on which these binaries will run +# Target platform: the platform for which this compiler will generate code +# +# We don't support build & host being different, because the build +# process creates binaries that are run during the build, and also +# installed. +# +# If host & target are different, then we are building a compiler +# which will generate intermediate .hc files to port to the target +# architecture for bootstrapping. The libraries and stage 2 compiler +# will be built as HC files for the target system, and likely won't +# build on this host platform. +# +# An important invariant is that for any piece of source code, the +# platform on which the code is going to run is the HOST platform, +# and the platform on which we are building is the BUILD platform. +# Additionally for the compiler, the platform this compiler will +# generate code for is the TARGET. TARGET is not meaningful outside +# the compiler sources. +# +# Guidelines for when to use HOST vs. TARGET: +# +# - In the build system (Makefile, foo.mk), normally we should test +# $(HOSTPLATFORM). There are some cases (eg. installation), where +# we expect $(HOSTPLATFORM)==$(TARGETPLATFORM), so in those cases it +# doesn't matter which is used. +# +# - In the compiler itself, we should test HOST or TARGET depending +# on whether the conditional relates to the code being generated, or +# the platform on which the compiler is running. See the section +# on "Coding Style" in the commentary for more details. +# +# - In all other code, we should be testing HOST only. +# +# NOTE: cross-compiling is not well supported by the build system. +# You have to do a lot of work by hand to cross compile: see the +# section on "Porting GHC" in the Building Guide. HOSTPLATFORM = @HostPlatform@ TARGETPLATFORM = @TargetPlatform@ -BUILDPLATFORM = @HostPlatform@ +BUILDPLATFORM = @BuildPlatform@ # Hack alert: -# in one or two places, we need to get at the OS version (major and perhaps even minor), -# HostOS_Full is the OS name reported by AC_CANONICAL_SYSTEM. +# in one or two places, we need to get at the OS version (major and +# perhaps even minor), HostOS_Full is the OS name reported by +# AC_CANONICAL_SYSTEM. # HostPlatform_CPP = @HostPlatform_CPP@ HostArch_CPP = @HostArch_CPP@ @@ -61,25 +101,31 @@ HostOS_CPP = @HostOS_CPP@ HostOS_Full = @HostOS_Full@ HostVendor_CPP = @HostVendor_CPP@ -# -# ToDo: check if these can be purged now. -- sof -# +TargetPlatform_CPP = @TargetPlatform_CPP@ +TargetArch_CPP = @TargetArch_CPP@ +TargetOS_CPP = @TargetOS_CPP@ +TargetVendor_CPP = @TargetVendor_CPP@ + +BuildPlatform_CPP = @BuildPlatform_CPP@ +BuildArch_CPP = @BuildArch_CPP@ +BuildOS_CPP = @BuildOS_CPP@ +BuildVendor_CPP = @BuildVendor_CPP@ -@HostPlatform_CPP@_HOST = 1 -@HostPlatform_CPP@_TARGET = 1 -@HostPlatform_CPP@_BUILD = 1 +@HostPlatform_CPP@_HOST = 1 +@TargetPlatform_CPP@_TARGET = 1 +@BuildPlatform_CPP@_BUILD = 1 -@HostArch_CPP@_HOST_ARCH = 1 -@HostArch_CPP@_TARGET_ARCH = 1 -@HostArch_CPP@_BUILD_ARCH = 1 +@HostArch_CPP@_HOST_ARCH = 1 +@TargetArch_CPP@_TARGET_ARCH = 1 +@BuildArch_CPP@_BUILD_ARCH = 1 -@HostOS_CPP@_HOST_OS = 1 -@HostOS_CPP@_TARGET_OS = 1 -@HostOS_CPP@_BUILD_OS = 1 +@HostOS_CPP@_HOST_OS = 1 +@TargetOS_CPP@_TARGET_OS = 1 +@BuildOS_CPP@_BUILD_OS = 1 -@HostVendor_CPP@_HOST_VENDOR = 1 -@HostVendor_CPP@_TARGET_VENDOR = 1 -@HostVendor_CPP@_BUILD_VENDOR = 1 +@HostVendor_CPP@_HOST_VENDOR = 1 +@TargetVendor_CPP@_TARGET_VENDOR = 1 +@BuildVendor_CPP@_BUILD_VENDOR = 1 # Leading underscores on symbol names in object files # Valid options: YES/NO @@ -89,6 +135,13 @@ LeadingUnderscore=@LeadingUnderscore@ # Pin a suffix on executables? If so, what (Windows only). exeext=@exeext@ +# Windows=YES if on a Windows platform +ifneq "$(findstring $(HostOS_CPP), mingw32 cygwin32)" "" +Windows=YES +else +Windows=NO +endif + ################################################################################ # # project-wide flags @@ -97,35 +150,52 @@ exeext=@exeext@ # ################################################################################ +# BootingFromHc - build GHC and the libraries from .hc files? +BootingFromHc = @BootingFromHc@ + +# BootingFromUnregisterisedHc - treat .hc files as containing unregisterised +# rather than registerised code, i.e., disable the mangler? +BootingFromUnregisterisedHc = @BootingFromUnregisterisedHc@ + +# Build Order: we build Happy, Haddock and Alex before GHC if they are +# in this source tree, just in case our GHC build depends on these +# local builds rather than installed versions of the tools. # -# What parts to build: An fptools build tree does not have to be built -# all in one go. By setting the list of ProjectsToBuild in build.mk you can -# control which projects are built. +# Build the libs first if we're bootstrapping from .hc files. +ifeq "$(BootingFromHc)" "YES" +AllProjects = glafp-utils happy alex haddock libraries hslibs ghc greencard hdirect hood nofib docs +else +AllProjects = glafp-utils happy alex haddock ghc libraries hslibs greencard hdirect hood nofib docs +endif + # -# Caution: the projects are built in the order given here, so if some -# projects use others you must list them in the correct order. +# (OPTIONAL) set ProjectsToBuild to a list of projects to be built. If this +# list is empty, then all projects present in the source tree will be built. # -# Generally: * glafp-utils should be first -# * happy next -# * ghc next -# then it's up to you +ProjectsToBuild = -ifeq "$(GhcWithHscBuiltViaC)" "YES" -# need hslibs/lang first if we're bootstrapping -ProjectsToBuild = glafp-utils hslibs ghc -else -ProjectsToBuild = glafp-utils ghc hslibs -endif # -# Make a distinction between building and installing +# set ProjectsDontInstall to a list of projects which are normally built but +# not installed. # -ProjectsToInstall = glafp-utils ghc hslibs +ProjectsDontInstall = glafp-utils nofib # # Should the various project tests directories be built? # IncludeTestDirsInBuild=NO +# +# Should the various project example directories be built? +# +IncludeExampleDirsInBuild=NO + +# +# Which ways should DocBook XML documents be built? +# options are: dvi ps pdf html chm HxS +# +XMLDocWays= + ################################################################################ # # GHC project @@ -141,22 +211,8 @@ IncludeTestDirsInBuild=NO # #--------------------------------------------------------------- -# Specify the Haskell compiler to be used to compile the compiler itself -# -# WithGhcHc Path name of the compiler to use -# -# WithGhcHcType What "type" of compiler is being used -# Valid options: -# HC_CHALMERS_HBC -# HC_GLASGOW_GHC -# HC_ROJEMO_NHC -# HC_UNSPECIFIED - -WithGhcHc = @WithHc@ - -# Variable which is set to the version number of the $(WithGhcHc) we're using. -# Not currently used, but might come in handy sometime soon. -#WithGhcHcVersion = $(shell echo `if ( $(WithGhcHc) --version 2>/dev/null >/dev/null ) then $(WithGhcHc) --version 2>&1 | @SedCmd@ -e 's/^.*version [^0-9]*\([.0-9]*\).*/\1/;s/\.//'; else echo unknown; fi; ` ) +# The compiler used to build GHC is $(GHC). To change the actual compiler +# used, re-configure with --with-ghc=. # Extra ways in which to build the compiler (for example, you might want to # build a profiled compiler so you can see where it spends its time) @@ -164,30 +220,72 @@ GhcCompilerWays= # Extra option flags to pass to the compiler that compiles the compiler # (Ones that are essential are wired into ghc/compiler/Makefile) -# Typical ones: -# -H25m allocate a bigger heap (might speed up compilation) +# Typical options to use here: # -# -O compile an optimised compiler -# -# -DDEBUG include consistency/assertion checks in the compiled compiler +# -DDEBUG include debugging code and assertions (will make the +# compiler slower and produce debugging output, but useful +# for development) # # -dcore-lint check the types after every pass of the compiler; -# a pretty strong internal check -GhcHcOpts=-O +# a pretty strong internal check of the compiler being +# used to compile GHC. Useful when bootstrapping. +GhcHcOpts=-Rghc-timing -# GhcWithHscBuiltViaC - build GHC compiler proper (\`hsc') from .hc files? -GhcWithHscBuiltViaC=@BootingFromHc@ +# Extra options added to specific stages of the compiler bootstrap. +# These are placed later on the command line, and may therefore +# override options from $(GhcHcOpts). +GhcStage1HcOpts= +GhcStage2HcOpts= +GhcStage3HcOpts= -# Build a registerised version of hsc and runtime -# (unregisterised used for Hugs at the moment) -GhcWithRegisterised=YES +# Build a compiler that will build *unregisterised* libraries and +# binaries by default. Unregisterised code is supposed to compile and +# run without any support for architecture-specific assembly mangling, +# register assignment or tail-calls, and is therefore a good way to get +# started when porting GHC to new architectures. +# +# If this is set to NO, you can still use the unregisterised way +# (way 'u') to get unregisterised code, but the default way will be +# registerised. +# +# NOTE: the stage1 compiler will be a registerised binary (assuming +# the compiler you build with is generating registerised binaries), but +# the stage2 compiler will be an unregisterised binary. +# +GhcUnregisterised=NO # Build a compiler with a native code generator backend # (as well as a C backend) # # Target platforms supported: -# i386, alpha & sparc -GhcWithNativeCodeGen=$(shell if (test x$(findstring $(HostArch_CPP),i386 alpha sparc) = x); then echo NO; else echo YES; fi) +# i386, powerpc +# sparc has bitrotted +# AIX is not supported +ArchSupportsNCG=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc))) +OsSupportsNCG=$(strip $(patsubst $(HostOS_CPP), YES, $(patsubst aix,,$(HostOS_CPP)))) + +ifeq "$(OsSupportsNCG)$(ArchSupportsNCG)" "YESYES" +GhcWithNativeCodeGen=YES +else +GhcWithNativeCodeGen=NO +endif + +# Include support for generating Java +GhcWithJavaGen=NO + +HaveLibDL = @HaveLibDL@ + +# Whether to include GHCi in the compiler. Depends on whether the RTS linker +# has support for this OS/ARCH combination. + +OsSupportsGHCi=$(strip $(patsubst $(HostOS_CPP), YES, $(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin))) +ArchSupportsGHCi=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc powerpc64 sparc sparc64))) + +ifeq "$(OsSupportsGHCi)$(ArchSupportsGHCi)" "YESYES" +GhcWithInterpreter=YES +else +GhcWithInterpreter=NO +endif # # Building various ways? @@ -195,87 +293,111 @@ GhcWithNativeCodeGen=$(shell if (test x$(findstring $(HostArch_CPP),i386 alpha s BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS))) BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS))) -# Include compiler support for letting the compiler (optionally) report -# your compilation to a central server for generation of fun stats. -# -GhcReportCompiles=NO - #------------------------------------------------------------------------------ -# Options for GHC's Prelude +# Options for Libraries # What extra ways to build the libraries in # In addition to the normal sequential way, the default is to also build # profiled prelude libraries. # When booting from .hc files, turn this off. -ifeq "$(GhcWithHscBuiltViaC)" "YES" +ifeq "$(BootingFromHc)" "YES" GhcLibWays= else GhcLibWays=p endif -# Option flags to pass to GHC when it's compiling prelude modules -# *and* standard library modules (std) *and* modules in hslibs -# Typically these are things like -O or -dcore-lint -# The ones that are *essential* are wired into ghc/lib/Makefile +# In addition, the RTS is built in some further variations. Ways that +# make sense here: +# +# thr : threaded +# thr_p : threaded profiled +# s : smp +# debug : debugging (compile with -g for the C compiler, and -DDEBUG) +# debug_p : debugging profiled +# debug_s : debugging smp +# debug_u : debugging unregisterised +# thr_debug : debugging threaded +# thr_debug_p : debugging threaded profiled +# +ifeq "$(BootingFromHc)" "YES" +GhcRTSWays= +else +GhcRTSWays=thr thr_p s debug debug_s thr_debug +endif + +# Option flags to pass to GHC when it's compiling modules in +# fptools/libraries. Typically these are things like -O or +# -dcore-lint or -H32m. The ones that are *essential* are wired into +# the build system. # # -O is pretty desirable, otherwise no inlining of prelude # things (incl "+") happens when compiling with this compiler +# +# -fgenerics switches on generation of support code for +# derivable type classes. This is now off by default, +# but we switch it on for the libraries so that we generate +# the code in case someone importing wants it -GhcLibHcOpts=-O +GhcLibHcOpts=-O -Rghc-timing -fgenerics # Win32 only: Enable the RTS and libraries to be built as DLLs -# Don't split object files for libs if we're building DLLs -EnableWin32DLLs=@EnableWin32DLLs@ -ifeq "$(EnableWin32DLLs)" "YES" -SplitObjs=NO -else -SplitObjs=YES -endif - +DLLized=@EnableWin32DLLs@ # Strip local symbols from libraries? This can make the libraries smaller, # but makes debugging somewhat more difficult. Doesn't work with all ld's. # StripLibraries=NO + # ---------------------------------------------------------------------------- -# Options for GHC's RTS +# Object-file splitting +# +# Set SplitObjs=YES or NO in your build.mk +# +# Don't use -split-objs in in GhcLibHcOpts, because the build +# system needs to do other special magic if you are +# doing object-file splitting +ifneq "$(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc)" "" +SplitObjs=YES +else +SplitObjs=NO +endif -# This is a good way to set things like -optc-g and -optc-DDEBUG for the RTS. -# GhcRtsHcOpts is used when compiling .hc files and .c files. -# GhcRtsCcOpts is used when compiling .c files only. +# Don't split object files for libs if we're building DLLs, or booting from +# .hc files. +ifeq "$(DLLized)" "YES" +SplitObjs=NO +endif +ifeq "$(BootingFromHc)" "YES" +SplitObjs=NO +endif +ifeq "$(GhcUnregisterised)" "YES" +SplitObjs=NO +endif +ifeq "$(TargetArch_CPP)" "ia64" +SplitObjs=NO +endif + +# ---------------------------------------------------------------------------- +# Options for GHC's RTS -# For a debugging RTS: -# GhcRtsHcOpts = -optc-DDEBUG -# GhcRtsCcOpts = -optc-g +# For an optimised RTS (you probably don't want to change these; we build +# a debugging RTS by default now. Use -debug to get it). +GhcRtsHcOpts=-optc-O2 +GhcRtsCcOpts=-fomit-frame-pointer -# For an optimised RTS: -GhcRtsHcOpts=-O2 -GhcRtsCcOpts=-O2 -optc-fomit-frame-pointer +# Include the front panel code? Needs GTK+. +GhcRtsWithFrontPanel = NO ################################################################################ # -# hslibs project +# libraries project # ################################################################################ -# Build HsLibs for which compiler? - -# If $(HsLibsFor) == hugs or ghc, we assume we're building for the -# compiler/interpreter in the same source tree. - -# HsLibsFor = ghc | hugs | nhc | hbc -HsLibsFor = ghc - -# hslibs for GHC also uses the following variables (defined above): -# GhcLibWays, GhcLibHcOpts, GhcLibToolsHcOpts, EnableWin32DLLs, StripLibraries - -# Haskell compiler options for tools in hslibs -GhcLibToolsHcOpts=-O - # Build the Haskell Readline bindings? # -GhcLibsWithReadline=@HaveReadlineHeaders@ +GhcLibsWithReadline=@GhcLibsWithReadline@ # Libraries needed for linking with readline LibsReadline=@LibsReadline@ @@ -285,6 +407,21 @@ LibsReadline=@LibsReadline@ # ReadlineIncludePath= +# Math library +LIBM=@LIBM@ + +# Build the ObjectIO ? +# +GhcLibsWithObjectIO=@GhcLibsWithObjectIO@ + +# .NET interop support? +# +DotnetSupport=@DotnetSupport@ + +# Build unix package? +# +GhcLibsWithUnix=@GhcLibsWithUnix@ + ################################################################################ # # happy project @@ -311,9 +448,9 @@ HappyHcOpts = -O ################################################################################ # -# green-card project +# greencard project # -# Green-card specific options +# GreenCard specific options # ################################################################################ @@ -346,6 +483,9 @@ NoFibWays = $(GhcLibWays) # Haskell compiler options for nofib NoFibHcOpts = -O +# Number of times to run each program +NoFibRuns = 5 + # ============================================================================== # # END OF PROJECT-SPECIFIC STUFF @@ -361,15 +501,27 @@ NoFibHcOpts = -O ################################################################################ # Directory used by GHC (and possibly other tools) for storing -# temporary files. If your /tmp isn't big enough, either override +# temporary files. If your TMPDIR isn't big enough, either override # this in build.mk or set your environment variable "TMPDIR" to point # to somewhere with more space. (TMPDIR=. is a good choice). -TMPDIR = /tmp +# DEFAULT_TMPDIR isn't called TMPDIR because GNU make tends to +# override an environment variable with the value of the make variable +# of the same name (if it exists) when executing sub-processes, so +# setting the TMPDIR env var would have no effect in the build tree. -# FPTOOLS_TOP: the top of the fptools hierarchy, absolute path. +DEFAULT_TMPDIR = /tmp +ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32" +DEFAULT_TMPDIR = C:/TEMP +endif +ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" +DEFAULT_TMPDIR = C:/TEMP +endif +# FPTOOLS_TOP: the top of the fptools hierarchy, absolute path. (POSIX / unix-style path). FPTOOLS_TOP_ABS = @hardtop@ +# The platform specific version of 'hardtop'. +FPTOOLS_TOP_ABS_PLATFORM = @hardtop_plat@ # # Installation directories, we don't use half of these, @@ -379,18 +531,37 @@ FPTOOLS_TOP_ABS = @hardtop@ prefix = @prefix@ exec_prefix = @exec_prefix@ bindir = @bindir@ -datadir = @datadir@ -#sysconfdir = @datadir@ -#sharedstatedir = @sharedstatedir@ -#localstatedir = @localstatedir@ -libdir = @libdir@ +datadir0 = @datadir@ +libdir0 = @libdir@ includedir = @includedir@ oldincludedir = @oldincludedir@ mandir = @mandir@ -#UNUSED, see below: libexecdir = @libexecdir@ -#UNUSED:infodir = @infodir@ -#UNUSED:srcdir = @srcdir@ +ifeq "$(Windows)" "YES" + +ifeq "$(strip $(prefix))" "" +prefix = c:/ghc +endif + +# Hack: our directory layouts tend to be different on Windows, so +# hack around configure's bogus assumptions here. +datadir = $(prefix) +libdir = $(prefix) + +else + +# +# Unix: override libdir and datadir to put project-specific stuff in +# a subdirectory with the version number included. +# +libdir = $(if $(ProjectNameShort),$(libdir0)/$(ProjectNameShort)-$(ProjectVersion),$(libdir0)) +datadir = $(if $(ProjectNameShort),$(datadir0)/$(ProjectNameShort)-$(ProjectVersion),$(datadir0)) + +endif # Windows + +# Default place for putting interface files is $(libdir) +# (overriden for packages in package.mk) +ifacedir = $(libdir) # # Default values for most of the above are only set if @@ -428,13 +599,32 @@ endif ifeq "$(strip $(mandir))" "" mandir = $(prefix)/man endif - -################################################################################ +#----------------------------------------------------------------------------- +# install configuration + # -# Utilities programs: flags +# Set this to have files installed with a specific owner # -################################################################################ +INSTALL_OWNER = + +# +# Set this to have files installed with a specific group +# +INSTALL_GROUP = + +# +# Invocations of `install' for the four different classes +# of targets: +# +INSTALL_PROGRAM = $(INSTALL) -m 755 +INSTALL_SCRIPT = $(INSTALL) -m 755 +INSTALL_SHLIB = $(INSTALL) -m 755 +INSTALL_DATA = $(INSTALL) -m 644 +INSTALL_DIR = $(MKDIRHIER) + +# ----------------------------------------------------------------------------- +# Utilities programs: flags # If you want to give any standard flags to pretty much any utility # (see utils.mk for a complete list), by adding a line here @@ -446,6 +636,23 @@ endif # # SRC_HC_OPTS += -O +SRC_HC_OPTS += -H16m -O + +# These flags make flex 8-bit +SRC_FLEX_OPTS += -8 + +SRC_INSTALL_BIN_OPTS += -s + +# lint gets all CPP's flags too +SRC_LINT_OPTS += -axz -DLINT $(SRC_CPP_OPTS) +WAY$(_way)_LINT_OPTS += WAY$(_way)_CPP_OPTS + +# Default fptools options for dllwrap. +SRC_BLD_DLL_OPTS += -mno-cygwin --target=i386-mingw32 + +# Flags for CPP when running GreenCard on .pgc files +GC_CPP_OPTS += -P -E -x c -traditional -D__GLASGOW_HASKELL__ + ################################################################################ # @@ -481,23 +688,18 @@ RUNTEST_PREFIX = $(GLAFP_UTILS)/runstdtest/ VERBATIM_PREFIX = $(GLAFP_UTILS)/verbatim/ SGMLVERB_PREFIX = $(GLAFP_UTILS)/sgmlverb/ ETAGS_PREFIX = $(GLAFP_UTILS)/etags/ -MSUB_PREFIX = $(GLAFP_UTILS)/msub/ LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/ MKDIRHIER_PREFIX = $(GLAFP_UTILS)/mkdirhier/ DOCBOOK_PREFIX = $(GLAFP_UTILS)/docbook/ -LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/ +HADDOCK_PREFIX = $(FPTOOLS_TOP)/haddock/ -HAPPY_PREFIX = $(FPTOOLS_TOP)/happy/src/ -GREENCARD_PREFIX = $(FPTOOLS_TOP)/green-card/src/ +LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/ UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/ -UGEN_PREFIX = $(FPTOOLS_TOP)/ghc/utils/ugen/ -STAT2RESID_PREFIX = $(FPTOOLS_TOP)/ghc/utils/stat2resid/ HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/ -HSCPP_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hscpp/ -HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hstags/ - +HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hasktags/ +HSC2HS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hsc2hs/ #----------------------------------------------------------------------------- # Haskell compilers and mkdependHS @@ -507,35 +709,68 @@ HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hstags/ # # $(HC) is a generic Haskell 98 compiler, set to $(GHC) by default. # $(MKDEPENDHS) is the Haskell dependency generator (ghc -M). +# +# NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead +# (because the version numbers have to be calculated). + +GHC = @WithGhc@ +GhcDir = $(dir $(GHC)) +GhcVersion = @GhcVersion@ +GhcMajVersion = @GhcMajVersion@ +GhcMinVersion = @GhcMinVersion@ +GhcPatchLevel = @GhcPatchLevel@ + +# Canonicalised ghc version number, used for easy (integer) version +# comparisons. We must expand $(GhcMinVersion) to two digits by +# adding a leading zero if necessary: +ifneq "$(findstring $(GhcMinVersion), 0 1 2 3 4 5 6 7 8 9)" "" +GhcCanonVersion = $(GhcMajVersion)0$(GhcMinVersion) +else +GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion) +endif -GHC = @GHC@ HBC = @HBC@ NHC = @NHC@ HC = @WithHc@ -MKDEPENDHS = $(HC) +MKDEPENDHS = $(GHC) # Sometimes we want to invoke ghc from the build tree in different # projects (eg. it's handy to have a nofib & a ghc build in the same # tree). We can refer to "this ghc" as $(GHC_INPLACE): -GHC_INPLACE = $(FPTOOLS_TOP)/ghc/driver/ghc-inplace +GHC_INPLACE = $(FPTOOLS_TOP)/ghc/compiler/ghc-inplace +GHC_STAGE1 = $(FPTOOLS_TOP)/ghc/compiler/stage1/ghc-inplace +GHC_STAGE2 = $(FPTOOLS_TOP)/ghc/compiler/stage2/ghc-inplace +GHC_STAGE3 = $(FPTOOLS_TOP)/ghc/compiler/stage3/ghc-inplace #----------------------------------------------------------------------------- # C compiler # -# +# NB. Don't override $(WhatGccIsCalled) using build.mk, re-configure using +# the flag --with-gcc= instead. The reason is that the configure script +# needs to know which gcc you're using in order to perform its tests. + HaveGcc = @HaveGcc@ UseGcc = YES WhatGccIsCalled = @WhatGccIsCalled@ +GccVersion = @GccVersion@ ifeq "$(strip $(HaveGcc))" "YES" ifneq "$(strip $(UseGcc))" "YES" CC = cc else CC = $(WhatGccIsCalled) + GccDir = $(dir $(WhatGccIsCalled)) endif endif +# default C compiler flags +SRC_CC_OPTS = @SRC_CC_OPTS@ + +ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux" +SRC_CC_OPTS += -G0 +endif + #----------------------------------------------------------------------------- # GMP Library (version 2.0.x or above) # @@ -543,31 +778,42 @@ HaveLibGmp = @HaveLibGmp@ LibGmp = @LibGmp@ #----------------------------------------------------------------------------- -# Flex +# GMP framework (Mac OS X) +# +HaveFrameworkGMP = @HaveFrameworkGMP@ -FLEX = @LEX@ +#----------------------------------------------------------------------------- +# Mingwex Library +# +HaveLibMingwEx = @HaveLibMingwEx@ + +#----------------------------------------------------------------------------- +# Flex (currently unused, could be moved to glafp-utils) + +# FLEX = @LEX@ # Don't bother with -lfl, we define our own yywrap()s anyway. -FLEX_LIB = +# FLEX_LIB = #WAS:FLEX_LIB = @LEXLIB@ #----------------------------------------------------------------------------- # Other standard (ha!) Unix utilities AR = @ArCmd@ +ArSupportsInput = @ArSupportsInput@ # Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!! BASH = /usr/local/bin/bash -# -# Could be either gzip or compress -# -COMPRESS = @CompressCmd@ -COMPRESS_SUFFIX = @CompressSuffix@ CONTEXT_DIFF = @ContextDiffCmd@ CP = cp -CPP = @CPP@ +CPP = @CPP@ @CPPFLAGS@ CTAGS = $(ETAGS) -RAWCPP = $(CPP) -undef -traditional +# +# RAWCPP_FLAGS are the flags to give to cpp (viz, gcc -E) to persuade it to +# behave plausibly on Haskell sources. +# +RAWCPP_FLAGS = -undef -traditional FIND = @FindCmd@ +SORT = @SortCmd@ INSTALL = @INSTALL@ # # Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback @@ -576,19 +822,33 @@ INSTALL = @INSTALL@ # INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL)) LATEX = latex +HEVEA = hevea +HACHA = hacha LN_S = @LN_S@ MANMACROS = -man MSMACROS = -ms MV = mv NROFF = nroff PERL = @PerlCmd@ +PYTHON = @PythonCmd@ PIC = pic PREPROCESSCMD = $(CC) -E -PRINTER = lpr RANLIB = @RANLIB@ RM = rm -f SED = @SedCmd@ SHELL = /bin/sh + +LD = @LdCmd@ + +# Some ld's support the -x flag and some don't, so the configure +# script detects which we have and sets LdXFlag to "-x" or "" +# respectively. +LD_X = @LdXFlag@ + +# GNU ld supports input via a linker script, which is useful to avoid +# overflowing command-line length limits. +LdIsGNULd = @LdIsGNULd@ + # # In emergency situations, REAL_SHELL is used to perform shell commands # from within the ghc driver script, by scribbling the command line to @@ -618,11 +878,6 @@ TAR = @TarCmd@ ZIP = zip # -# Under Windows, we have to deal with .exe suffixes -# -EXE_SUFFIX=@ExeSuffix@ - -# # This is special to literate/, ToDo: add literate-specific # configure setup to literate/. # @@ -635,27 +890,22 @@ TIB = tib TIME = @TimeCmd@ TROFF = troff UNAME = uname -YACC = @YaccCmd@ #----------------------------------------------------------------------------- -# SGML stuff - -JADE = @JadeCmd@ - -SGML2DVI = $(DOCBOOK_PREFIX)db2dvi -SGML2HTML = $(DOCBOOK_PREFIX)db2html -SGML2PS = $(DOCBOOK_PREFIX)db2ps -SGML2PDF = $(DOCBOOK_PREFIX)db2pdf -SGML2RTF = $(DOCBOOK_PREFIX)db2rtf +# DocBook XML stuff -SGMLSTYLESHEET = $(FPTOOLS_TOP_ABS)/docs/fptools-both.dsl +XSLTPROC = @XsltprocCmd@ +XMLLINT = @XmllintCmd@ +FOP = @FopCmd@ +XMLTEX = @XmltexCmd@ +PDFXMLTEX = @PdfxmltexCmd@ +DVIPS = @DvipsCmd@ -SRC_SGML2DVI_OPTS = $(DOCBOOK_CATALOG) -d $(SGMLSTYLESHEET) -SRC_SGML2HTML_OPTS = $(DOCBOOK_CATALOG) -d $(SGMLSTYLESHEET) -SRC_SGML2PS_OPTS = $(DOCBOOK_CATALOG) -d $(SGMLSTYLESHEET) -SRC_SGML2RTF_OPTS = $(DOCBOOK_CATALOG) -d $(SGMLSTYLESHEET) +DIR_DOCBOOK_XSL = @DIR_DOCBOOK_XSL@ -DOCBOOK_CATALOG = $(FPTOOLS_TOP_ABS)/@Catalog@ +XSLTPROC_LABEL_OPTS = --stringparam toc.section.depth 3 \ + --stringparam section.autolabel 1 \ + --stringparam section.label.includes.component.label 1 #----------------------------------------------------------------------------- # FPtools support software @@ -665,17 +915,59 @@ MKDEPENDC = $(MKDEPENDC_PREFIX)mkdependC LTX = $(LTX_PREFIX)ltx MKDIRHIER = $(MKDIRHIER_PREFIX)mkdirhier LNDIR = $(LNDIR_PREFIX)lndir -MSUB = $(MSUB_PREFIX)msub ETAGS = $(ETAGS_PREFIX)etags VERBATIM = $(VERBATIM_PREFIX)verbatim SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb RUNTEST = $(RUNTEST_PREFIX)runstdtest + +BLD_DLL = dllwrap + +# +# .NET support software +# +ILX2IL = ilx2il +ILASM = ilasm + +# +# ghc-pkg +# +GHC_PKG = @GhcPkgCmd@ + +# +# GreenCard +# +GREENCARD = @GreenCardCmd@ +GREENCARD_VERSION = @GreenCardVersion@ + +# +# Happy +# HAPPY = @HappyCmd@ HAPPY_VERSION = @HappyVersion@ -LX = @LxCmd@ -GREENCARD = $(FPTOOLS_TOP)/green-card/src/green-card +# +# Options to pass to Happy when we're going to compile the output with GHC +# +GHC_HAPPY_OPTS = -agc -BLD_DLL = dllwrap +# Temp. to work around performance problems in the HEAD around 8/12/2003, +# A Happy compiled with this compiler needs more stack. +SRC_HAPPY_OPTS = +RTS -K2m -RTS + +# +# Alex +# +ALEX = @AlexCmd@ +ALEX_VERSION = @AlexVersion@ +# +# Options to pass to Happy when we're going to compile the output with GHC +# +GHC_ALEX_OPTS = -g + +# +# Haddock +# +HADDOCK = @HaddockCmd@ +HADDOCK_INPLACE = $(HADDOCK_PREFIX)/src/haddock-inplace # # Stuff from fptools/literate @@ -690,12 +982,10 @@ LIT2TEXT = $(LITERATE_PREFIX)lit2text # # Stuff from fptools/ghc/utils # -UNLIT = $(UNLIT_PREFIX)unlit -UGEN = $(UGEN_PREFIX)ugen -STAT2RESID = $(STAT2RESID_PREFIX)stat2resid -HP2PS = $(HP2PS_PREFIX)hp2ps -HSCPP = $(HSCPP_PREFIX)hscpp -HSTAGS = $(HSTAGS_PREFIX)hstags +UNLIT = $(UNLIT_PREFIX)unlit$(exeext) +HP2PS = $(HP2PS_PREFIX)hp2ps$(exeext) +HSTAGS = $(HSTAGS_PREFIX)hasktags +HSC2HS = $(HSC2HS_PREFIX)hsc2hs-inplace # # Options for the compiling different `ways'. Various projects within @@ -734,7 +1024,7 @@ HSTAGS = $(HSTAGS_PREFIX)hstags # The ways currently defined. # ALL_WAYS=p t u s mp mg a b c d e f g h i j k l m n o A B -USER_WAYS=a b c d e f g h i j k l m n o A B +USER_WAYS=a b c d e f g h j k l m n o A B # # The following ways currently have treated specially, p u t mg, @@ -744,6 +1034,10 @@ USER_WAYS=a b c d e f g h i j k l m n o A B # # If you want to add to these default options, fill in the variables below: +# Way 'i': +WAY_i_NAME=ILX +WAY_i_HC_OPTS= -filx -fruntime-types + # Way 'p': WAY_p_NAME=profiling WAY_p_HC_OPTS= -prof @@ -756,10 +1050,6 @@ WAY_t_HC_OPTS= -ticky WAY_u_NAME=unregisterized (using portable C only) WAY_u_HC_OPTS=-unreg -# Way `s': -WAY_s_NAME=threads (for SMP) -WAY_s_HC_OPTS=-smp - # Way `mp': WAY_mp_NAME=parallel WAY_mp_HC_OPTS=-parallel @@ -768,9 +1058,45 @@ WAY_mp_HC_OPTS=-parallel WAY_mg_NAME=GranSim WAY_mg_HC_OPTS=-gransim -# Way `dll': -WAY_dll_NAME=Win32 DLLs -WAY_dll_HC_OPTS= +# +# These ways apply to the RTS only: +# + +# Way 'thr': +WAY_thr_NAME=threaded +WAY_thr_HC_OPTS=-optc-DTHREADED_RTS + +# Way 'thr_p': +WAY_thr_p_NAME=threaded profiled +WAY_thr_p_HC_OPTS=-optc-DTHREADED_RTS -prof + +# Way `s': +WAY_s_NAME=threads (for SMP) +WAY_s_HC_OPTS=-optc-DSMP -optc-DTHREADED_RTS + +# Way 'debug': +WAY_debug_NAME=debug +WAY_debug_HC_OPTS=-optc-DDEBUG + +# Way 'debug_p': +WAY_debug_p_NAME=debug profiled +WAY_debug_p_HC_OPTS=-optc-DDEBUG -prof + +# Way 'debug_u': +WAY_debug_u_NAME=debug unregisterised +WAY_debug_u_HC_OPTS=-optc-DDEBUG -unreg + +# Way 'debug_s': +WAY_debug_s_NAME=debug SMP +WAY_debug_s_HC_OPTS=-optc-DDEBUG -optc-DTHREADED_RTS -optc-DSMP + +# Way 'thr_debug': +WAY_thr_debug_NAME=threaded +WAY_thr_debug_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG + +# Way 'thr_debug_p': +WAY_thr_debug_p_NAME=threaded +WAY_thr_debug_p_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -prof # # Add user-way configurations here: @@ -805,9 +1131,6 @@ WAY_g_HC_OPTS= WAY_h_NAME= WAY_h_HC_OPTS= -WAY_i_NAME= -WAY_i_HC_OPTS= - WAY_j_NAME= WAY_j_HC_OPTS= @@ -825,3 +1148,23 @@ WAY_n_HC_OPTS= WAY_o_NAME= WAY_o_HC_OPTS= + +################################################################################ +# +# 31-bit-Int Core files +# +################################################################################ + +# +# It is possible to configure the compiler and prelude to support 31-bit +# integers, suitable for a back-end and RTS using a tag bit on a 32-bit +# architecture. Currently the only useful output from this option is external Core +# files. The following additions to your build.mk will produce the +# 31-bit core output. Note that this is *not* just a library "way"; the +# compiler must be built a special way too. + +# GhcCppOpts +=-DWORD_SIZE_IN_BITS=31 +# GhcLibHcOpts +=-fext-core -fno-code -DWORD_SIZE_IN_BITS=31 +# GhcLibCppOpts += -DWORD_SIZE_IN_BITS=31 +# SplitObjs=NO +