X-Git-Url: http://git.megacz.com/?a=blobdiff_plain;f=mk%2Fconfig.mk.in;h=f019ab6deb7f67cdd8a99d6eb7c0123c4752fce2;hb=d5febf91342eba207d872ac3979f7537d95ea797;hp=c928dbf9ae1d9965915ae92752de5d38a957e6c0;hpb=ca5ded310c0a596be199a3da5f14be2fb2020687;p=ghc-hetmet.git

diff --git a/mk/config.mk.in b/mk/config.mk.in
index c928dbf..f019ab6 100644
--- a/mk/config.mk.in
+++ b/mk/config.mk.in
@@ -56,7 +56,8 @@ endif
 # random .o-file stuff might change even if the .hi syntax doesn't
 
 ProjectName       = @ProjectName@
-ProjectVersion    = @ProjectVersion@
+ProjectTags       =
+ProjectVersion    = @ProjectVersion@$(ProjectTags)
 ProjectVersionInt = @ProjectVersionInt@
 ProjectPatchLevel = @ProjectPatchLevel@
 
@@ -162,6 +163,7 @@ LeadingUnderscore=@LeadingUnderscore@
 
 # Pin a suffix on executables? If so, what (Windows only).
 exeext=@exeext@
+soext=@soext@
 
 # Windows=YES if on a Windows platform
 ifneq "$(findstring $(HostOS_CPP), mingw32 cygwin32)" ""
@@ -216,6 +218,9 @@ GhcStage1HcOpts=
 GhcStage2HcOpts=
 GhcStage3HcOpts=
 
+GhcProfiled=NO
+GhcDebugged=NO
+
 # Build a compiler that will build *unregisterised* libraries and
 # binaries by default.  Unregisterised code is supposed to compile and
 # run without any support for architecture-specific assembly mangling,
@@ -246,11 +251,10 @@ endif
 ArchSupportsNCG=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc)))
 OsSupportsNCG=$(strip $(patsubst $(HostOS_CPP), YES, $(patsubst aix,,$(HostOS_CPP))))
 
-ifeq "$(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)" "YESYESNO"
-GhcWithNativeCodeGen=YES
-else
-GhcWithNativeCodeGen=NO
-endif
+# lazy test, because $(GhcUnregisterised) might be set in build.mk later.
+GhcWithNativeCodeGen=$(strip\
+    $(if $(filter YESYESNO,\
+		  $(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)),YES,NO))
 
 # Include support for generating Java
 GhcWithJavaGen=NO
@@ -261,11 +265,8 @@ HaveLibDL = @HaveLibDL@
 # includes/SMP.h
 ArchSupportsSMP=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 sparc powerpc)))
 
-ifeq "$(ArchSupportsSMP)$(GhcUnregisterised)" "YESNO"
-GhcWithSMP=YES
-else
-GhcWithSMP=NO
-endif
+# lazy test, because $(GhcUnregisterised) might be set in build.mk later.
+GhcWithSMP=$(strip $(if $(filter YESNO, $(ArchSupportsSMP)$(GhcUnregisterised)),YES,NO))
 
 # Whether to include GHCi in the compiler.  Depends on whether the RTS linker
 # has support for this OS/ARCH combination.
@@ -315,8 +316,7 @@ BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
 
 HscIfaceFileVersion=6
 
-# Building with debugger?
-GhciWithDebugger=YES
+MakefileDeps=YES
 
 #------------------------------------------------------------------------------
 # Options for Libraries
@@ -341,11 +341,26 @@ endif
 #   debug_u     : debugging unregisterised
 #   thr_debug   : debugging threaded
 #   thr_debug_p : debugging threaded profiled
+#   t		: ticky-ticky profiling
+#   debug_t	: debugging ticky-ticky profiling
 #
-ifeq "$(BootingFromHc)" "YES"
 GhcRTSWays=
+
+# Usually want the debug version
+ifeq "$(BootingFromHc)" "NO"
+GhcRTSWays += debug 
+endif
+
+# Want the threaded versions unless we're unregisterised
+# Defer the check until later by using $(if..), because GhcUnregisterised might
+# be set in build.mk, which hasn't been read yet.
+GhcRTSWays += $(if $(findstring NO, $(GhcUnregisterised)),thr thr_p thr_debug,)
+
+# We can only build GHCi threaded if we have a threaded RTS:
+ifneq "$(findstring thr, $(GhcRTSWays))" ""
+GhcThreaded=YES
 else
-GhcRTSWays=thr thr_p debug thr_debug
+GhcThreaded=NO
 endif
 
 # Option flags to pass to GHC when it's compiling modules in
@@ -389,26 +404,15 @@ CorePackages = base Cabal haskell98 readline regex-base regex-compat \
 #	Don't use -split-objs in in GhcLibHcOpts, because the build
 #		system needs to do other special magic if you are
 #		doing object-file splitting
-ifneq "$(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc)" ""
-SplitObjs=YES
-else
-SplitObjs=NO
-endif
 
-# Don't split object files for libs if we're building DLLs, or booting from
-# .hc files.
-ifeq "$(DLLized)" "YES"
-SplitObjs=NO
-endif
-ifeq "$(BootingFromHc)" "YES"
-SplitObjs=NO
-endif
-ifeq "$(GhcUnregisterised)" "YES"
-SplitObjs=NO
-endif
-ifeq "$(TargetArch_CPP)" "ia64"
-SplitObjs=NO
-endif
+# lazy test, so that $(GhcUnregisterised) can be set in build.mk
+SplitObjs=$(strip $(if $(filter $(TargetArch_CPP),i386 x86_64 powerpc sparc),\
+	            $(if $(filter YES,$(BootingFromHC)),\
+		      NO,\
+	              $(if $(filter NO,$(GhcUnregisterised)),\
+			YES,\
+			NO)),\
+		    NO))
 
 # Math library
 LIBM=@LIBM@
@@ -502,13 +506,26 @@ FPTOOLS_TOP_ABS		= @hardtop@
 # The platform specific version of 'hardtop'.
 FPTOOLS_TOP_ABS_PLATFORM = @hardtop_plat@
 
+# This gets used in the default docdir
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+
+BIN_DIST_NAME=ghc-$(ProjectVersion)
+BIN_DIST_TOPDIR=$(FPTOOLS_TOP_ABS)
+BIN_DIST_DIR=$(BIN_DIST_TOPDIR)/$(BIN_DIST_NAME)
+BIN_DIST_TARBALL=$(BIN_DIST_TOPDIR)/$(BIN_DIST_NAME)-$(TARGETPLATFORM).tar.bz2
+
 #
 # Installation directories, we don't use half of these,
 # but since the configure script has them on offer while
 # passing through, we might as well set them.
 
 prefix			= @prefix@
-datarootdir		= @datarootdir@
+
+# New autoconf (>= 2.60?) make a configure with a --datarootdir=DIR flag.
+# However, in order to support older autoconf's we don't use it.
+# datarootdir is set lower down instead.
+# datarootdir		= @datarootdir@
+
 exec_prefix		= @exec_prefix@
 bindir			= @bindir@
 datadir0		= @datadir@
@@ -525,6 +542,7 @@ endif
 
 # Hack: our directory layouts tend to be different on Windows, so
 # hack around configure's bogus assumptions here.
+datarootdir = $(prefix)
 datadir 	= $(prefix)
 libdir		= $(prefix)
 
@@ -534,11 +552,29 @@ else
 # Unix: override libdir and datadir to put ghc-specific stuff in
 # a subdirectory with the version number included.
 #
-libdir     = $(libdir0)/ghc-$(ProjectVersion)
-datadir    = $(datadir0)/ghc-$(ProjectVersion)
+datarootdir = $(datadir0)
+datadir     = $(datadir0)/ghc-$(ProjectVersion)
+libdir      = $(libdir0)/ghc-$(ProjectVersion)
 
 endif # Windows
 
+headerdir = $(libdir)/include
+
+# New autoconf (>= 2.60?) make a configure with --docdir=DIR etc flags.
+# However, in order to support older autoconf's we don't use them.
+
+#docdir    = @docdir@
+#htmldir   = @htmldir@
+#dvidir    = @dvidir@
+#pdfdir    = @pdfdir@
+#psdir     = @psdir@
+
+docdir    = $(datarootdir)/doc/ghc
+htmldir   = $(docdir)
+dvidir    = $(docdir)
+pdfdir    = $(docdir)
+psdir     = $(docdir)
+
 # Default place for putting interface files is $(libdir)
 # (overriden for packages in package.mk)
 ifacedir		= $(libdir)
@@ -601,6 +637,7 @@ INSTALL_PROGRAM = $(INSTALL) -m 755
 INSTALL_SCRIPT  = $(INSTALL) -m 755
 INSTALL_SHLIB   = $(INSTALL) -m 755
 INSTALL_DATA    = $(INSTALL) -m 644
+INSTALL_HEADER  = $(INSTALL) -m 644
 INSTALL_MAN     = $(INSTALL) -m 644
 INSTALL_DIR     = $(MKDIRHIER)
 
@@ -775,6 +812,9 @@ MKDIRHIER		= $(GHC_MKDIRHIER_DIR)/$(GHC_MKDIRHIER_PGM)
 LNDIR			= $(GHC_LNDIR_DIR)/$(GHC_LNDIR_PGM)
 RUNTEST			= $(GHC_RUNTEST_DIR)/$(GHC_RUNTEST_PGM)
 
+GENERATED_FILE  = chmod a-w
+EXECUTABLE_FILE = chmod +x
+
 #-----------------------------------------------------------------------------
 # Haskell compilers and mkdependHS
 
@@ -817,11 +857,11 @@ GhcPatchLevel	= @ProjectPatchLevel@
 GhcMajVersion	= @GhcMajVersion@
 GhcMinVersion	= @GhcMinVersion@
 
-ghc_ge_504 = YES
 ghc_ge_601 = YES
 ghc_ge_602 = YES
 ghc_ge_603 = YES
 ghc_ge_605 = YES
+ghc_ge_607 = YES
 
 else # not UseStage1 or BootingFromHc
 
@@ -833,11 +873,11 @@ GhcMajVersion	= @GhcMajVersion@
 GhcMinVersion	= @GhcMinVersion@
 
 # Some useful GHC version predicates:
-ghc_ge_504 = $(shell if (test $(GhcCanonVersion) -ge 504); then echo YES; else echo NO; fi)
-ghc_ge_601 = $(shell if (test $(GhcCanonVersion) -ge 601); then echo YES; else echo NO; fi)
-ghc_ge_602 = $(shell if (test $(GhcCanonVersion) -ge 602); then echo YES; else echo NO; fi)
-ghc_ge_603 = $(shell if (test $(GhcCanonVersion) -ge 603); then echo YES; else echo NO; fi)
-ghc_ge_605 = $(shell if (test $(GhcCanonVersion) -ge 605); then echo YES; else echo NO; fi)
+ghc_ge_601 = @ghc_ge_601@
+ghc_ge_602 = @ghc_ge_602@
+ghc_ge_603 = @ghc_ge_603@
+ghc_ge_605 = @ghc_ge_605@
+ghc_ge_607 = @ghc_ge_607@
 endif
 
 # Canonicalised ghc version number, used for easy (integer) version
@@ -1002,6 +1042,10 @@ UNAME			= uname
 # GTK+
 GTK_CONFIG = @GTK_CONFIG@
 
+# Set this if you want to use Inno Setup to build a Windows installer
+# when you make a bindist
+ISCC                    =
+
 #-----------------------------------------------------------------------------
 # DocBook XML stuff
 
@@ -1152,6 +1196,10 @@ WAY_debug_p_HC_OPTS=-optc-DDEBUG -prof
 WAY_debug_u_NAME=debug unregisterised
 WAY_debug_u_HC_OPTS=-optc-DDEBUG -unreg
 
+# Way 'debug_t':
+WAY_debug_t_NAME=debug ticky-ticky profiling
+WAY_debug_t_HC_OPTS= -ticky -optc-DDEBUG
+
 # Way 'thr_debug':
 WAY_thr_debug_NAME=threaded
 WAY_thr_debug_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG
@@ -1160,6 +1208,23 @@ WAY_thr_debug_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG
 WAY_thr_debug_p_NAME=threaded
 WAY_thr_debug_p_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -prof
 
+# Way 'dyn': build dynamic shared libraries
+WAY_dyn_NAME=dyn
+WAY_dyn_HC_OPTS=-fPIC -dynamic
+WAY_dyn_LIB_TARGET=libHSrts-gcc661.so
+
+# Way 'thr_dyn':
+WAY_thr_dyn_NAME=thr_dyn
+WAY_thr_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS
+
+# Way 'thr_debug_dyn':
+WAY_thr_debug_dyn_NAME=thr_dyn
+WAY_thr_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS -optc-DDEBUG
+
+# Way 'debug_dyn':
+WAY_debug_dyn_NAME=thr_dyn
+WAY_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DDEBUG
+
 #
 # Add user-way configurations here:
 #
@@ -1230,3 +1295,11 @@ WAY_o_HC_OPTS=
 # GhcLibCppOpts += -DWORD_SIZE_IN_BITS=31
 # SplitObjs=NO
 
+################################################################################
+#
+#    Library configure arguments
+#
+################################################################################
+
+CONFIGURE_ARGS = @CONFIGURE_ARGS@
+