X-Git-Url: http://git.megacz.com/?a=blobdiff_plain;f=ships%2FDebug.ship;fp=ships%2FDebug.ship;h=3069a99af104183febe05e18483017474244797b;hb=fcf6bfe537a716299bb58e6dfb1c20afeb39c6ed;hp=76b2f88dc7aef258ee62323a7598c5d7264968e8;hpb=1cddcde4ef6f56bb0b70cfeeb59d0bf40090d656;p=fleet.git

diff --git a/ships/Debug.ship b/ships/Debug.ship
index 76b2f88..3069a99 100644
--- a/ships/Debug.ship
+++ b/ships/Debug.ship
@@ -31,6 +31,14 @@ percolate down: rst_in      1
 percolate down: clk_pin     1
 percolate up:   clk_out     1
 
+percolate up:    gpio_led_c   1
+percolate up:    gpio_led_e   1
+percolate up:    gpio_led_n   1
+percolate up:    gpio_led_s   1
+percolate up:    gpio_led_w   1
+percolate down:  gpio_dip_sw1 1
+
+
 == TeX ==============================================================
 
 This ship is used for debugging.  It has only one port, {\tt in}.
@@ -300,6 +308,63 @@ NET CCLK                LOC = C14  | IOSTANDARD = LVCMOS25;
 
 == FPGA:ML509 ==============================================================
 
+  assign gpio_led_n = 0;
+  assign gpio_led_s = 0;
+  assign gpio_led_e = 1;
+  assign gpio_led_w = 1;
+
+  wire tdo;
+  wire update;
+  wire shift;
+  wire reset;
+  wire tdi;
+  wire sel;
+  wire drck; 
+  BSCAN_VIRTEX5 
+    #(.JTAG_CHAIN(1))
+    bscanvirtex(.TDO(tdo), 
+                .UPDATE(update), 
+                .SHIFT(shift), 
+                .RESET(reset), 
+                .TDI(tdi), 
+                .SEL(sel), 
+                .DRCK(drck));
+
+  wire [9:0] din;
+  wire [9:0] dout;
+  reg  [9:0] dout_r;
+  wire strobe_o;
+  assign din = 10'h71;
+  wire ack_i;
+  assign ack_i = 1;
+
+  fjmem_core
+   my_fjmem_core(
+      .clkdr_i  (drck),
+      .trst_i   (reset),
+      .shift_i  (shift),
+      .update_i (update),
+      .tdi_i    (tdi),
+      .tdo_o    (tdo),
+      .clk_i    (clk),
+      .res_i    (rst),
+
+      .strobe_o (strobe_o),
+      .read_o   (),
+      .write_o  (write_o),
+      .ack_i    (ack_i),
+      .cs_o     (),
+      .addr_o   (),
+      .din_i    (dout_r),
+      .dout_o   (dout)
+    );
+
+  always @(posedge clk) begin
+    if (strobe_o)
+      dout_r <= dout;
+  end
+
+
   wire break_i;
   reg send_k;
   initial send_k = 0;
@@ -471,7 +536,12 @@ Net uart_out LOC=AG20;
 Net uart_out TIG;
 Net uart_out PULLUP;
 
-
+NET  gpio_led_c           LOC="E8";    # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
+NET  gpio_led_e           LOC="AG23";  # Bank 2, Vcco=3.3V
+NET  gpio_led_n           LOC="AF13";  # Bank 2, Vcco=3.3V
+NET  gpio_led_s           LOC="AG12";  # Bank 2, Vcco=3.3V
+NET  gpio_led_w           LOC="AF23";  # Bank 2, Vcco=3.3V
+NET  gpio_dip_sw1         LOC="U25";   # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
 
 
 == Test ================================================================