then
CoreLint( CoreUtils )
OccurAnal (CoreUtils.exprIsTrivial)
+ CoreTidy (CoreUtils.exprArity )
then
CoreUnfold (OccurAnal.occurAnalyseGlobalExpr)
then
- CoreTidy (CoreUnfold.noUnfolding)
- Subst (Unfolding, CoreFVs)
- Generics (mkTopUnfolding)
+ Subst (CoreUnfold.Unfolding, CoreFVs)
+ Generics (CoreUnfold.mkTopUnfolding)
then
- Rules (Unfolding, CoreTidy.tidyIdRules)
- MkId (CoreUnfold.mkUnfolding, Subst, Rule.addRule)
+ Rules (CoreUnfold.Unfolding, PprCore.pprTidyIdRules)
+then
+ MkId (CoreUnfold.mkUnfolding, Subst, Rules.addRule)
then
PrelInfo (MkId)
HscTypes( Rules.RuleBase )
+---------------- END OF INFRASTRUCTURE --------------------
+
+then
+ CoreTidy (HscTypes.PersistentCompilerState)
+
%
-% (c) The GRASP/AQUA Project, Glasgow University, 1992-1998
+% (c) The AQUA Project, Glasgow University, 1996-1998
%
-\section{Tidying up Core}
+%************************************************************************
+%* *
+\section[PprCore]{Printing of Core syntax, including for interfaces}
+%* *
+%************************************************************************
\begin{code}
module CoreTidy (
- tidyCorePgm, tidyExpr, tidyCoreExpr, tidyIdRules,
- tidyBndr, tidyBndrs
+ tidyBind, tidyExpr,
+ tidyBndr, tidyBndrs, tidyVarOcc,
+ tidyIdRules, pprTidyIdRules
) where
#include "HsVersions.h"
-import CmdLineOpts ( DynFlags, DynFlag(..), opt_OmitInterfacePragmas )
import CoreSyn
-import CoreUnfold ( noUnfolding, mkTopUnfolding, okToUnfoldInHiFile )
-import CoreFVs ( ruleLhsFreeIds, ruleRhsFreeVars, exprSomeFreeVars )
-import PprCore ( pprIdRules )
-import CoreLint ( showPass, endPass )
import CoreUtils ( exprArity )
+import PprCore ( pprIdRules )
+import Id ( Id, mkUserLocal, idInfo, setIdInfo, idUnique, idType, idCoreRules )
+import IdInfo ( vanillaIdInfo, setArityInfo,
+ newStrictnessInfo, setAllStrictnessInfo,
+ newDemandInfo, setNewDemandInfo )
+import Type ( tidyType, tidyTyVarBndr )
+import Var ( Var )
import VarEnv
-import VarSet
-import Var ( Id, Var )
-import Id ( idType, idInfo, idName, idCoreRules,
- isExportedId, idUnique, mkVanillaGlobal, isLocalId,
- isImplicitId, mkUserLocal, setIdInfo
- )
-import IdInfo {- loads of stuff -}
-import NewDemand ( isBottomingSig, topSig )
-import BasicTypes ( isNeverActive )
-import Name ( getOccName, nameOccName, mkInternalName, mkExternalName,
- localiseName, isExternalName, nameSrcLoc
- )
-import NameEnv ( filterNameEnv )
-import OccName ( TidyOccEnv, initTidyOccEnv, tidyOccName )
-import Type ( tidyTopType, tidyType, tidyTyVarBndr )
-import Module ( Module, moduleName )
-import HscTypes ( PersistentCompilerState( pcs_PRS ),
- PersistentRenamerState( prsOrig ),
- NameSupply( nsNames, nsUniqs ),
- TypeEnv, extendTypeEnvList, typeEnvIds,
- ModDetails(..), TyThing(..)
- )
-import FiniteMap ( lookupFM, addToFM )
-import Maybes ( orElse )
-import ErrUtils ( showPass, dumpIfSet_core )
+import Name ( getOccName )
+import OccName ( tidyOccName )
import SrcLoc ( noSrcLoc )
-import UniqFM ( mapUFM )
-import UniqSupply ( splitUniqSupply, uniqFromSupply )
-import List ( partition )
-import Util ( mapAccumL )
-import Maybe ( isJust )
+import Maybes ( orElse )
import Outputable
+import Util ( mapAccumL )
\end{code}
-
-%************************************************************************
-%* *
-\subsection{What goes on}
-%* *
-%************************************************************************
-
-[SLPJ: 19 Nov 00]
-
-The plan is this.
-
-Step 1: Figure out external Ids
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-First we figure out which Ids are "external" Ids. An
-"external" Id is one that is visible from outside the compilation
-unit. These are
- a) the user exported ones
- b) ones mentioned in the unfoldings, workers,
- or rules of externally-visible ones
-This exercise takes a sweep of the bindings bottom to top. Actually,
-in Step 2 we're also going to need to know which Ids should be
-exported with their unfoldings, so we produce not an IdSet but an
-IdEnv Bool
-
-
-Step 2: Tidy the program
-~~~~~~~~~~~~~~~~~~~~~~~~
-Next we traverse the bindings top to bottom. For each *top-level*
-binder
-
- 1. Make it into a GlobalId
-
- 2. Give it a system-wide Unique.
- [Even non-exported things need system-wide Uniques because the
- byte-code generator builds a single Name->BCO symbol table.]
-
- We use the NameSupply kept in the PersistentRenamerState as the
- source of such system-wide uniques.
-
- For external Ids, use the original-name cache in the NameSupply
- to ensure that the unique assigned is the same as the Id had
- in any previous compilation run.
-
- 3. If it's an external Id, make it have a global Name, otherwise
- make it have a local Name.
- This is used by the code generator to decide whether
- to make the label externally visible
-
- 4. Give external Ids a "tidy" occurrence name. This means
- we can print them in interface files without confusing
- "x" (unique 5) with "x" (unique 10).
-
- 5. Give it its UTTERLY FINAL IdInfo; in ptic,
- * Its IdDetails becomes VanillaGlobal, reflecting the fact that
- from now on we regard it as a global, not local, Id
-
- * its unfolding, if it should have one
-
- * its arity, computed from the number of visible lambdas
-
- * its CAF info, computed from what is free in its RHS
-
-
-Finally, substitute these new top-level binders consistently
-throughout, including in unfoldings. We also tidy binders in
-RHSs, so that they print nicely in interfaces.
-
-\begin{code}
-tidyCorePgm :: DynFlags -> Module
- -> PersistentCompilerState
- -> CgInfoEnv -- Information from the back end,
- -- to be splatted into the IdInfo
- -> ModDetails
- -> IO (PersistentCompilerState, ModDetails)
-
-tidyCorePgm dflags mod pcs cg_info_env
- (ModDetails { md_types = env_tc, md_insts = insts_tc,
- md_binds = binds_in, md_rules = orphans_in })
- = do { showPass dflags "Tidy Core"
-
- ; let ext_ids = findExternalSet binds_in orphans_in
- ; let ext_rules = findExternalRules binds_in orphans_in ext_ids
- -- findExternalRules filters ext_rules to avoid binders that
- -- aren't externally visible; but the externally-visible binders
- -- are computed (by findExternalSet) assuming that all orphan
- -- rules are exported. So in fact we may export more than we
- -- need. (It's a sort of mutual recursion.)
-
- -- We also make sure to avoid any exported binders. Consider
- -- f{-u1-} = 1 -- Local decl
- -- ...
- -- f{-u2-} = 2 -- Exported decl
- --
- -- The second exported decl must 'get' the name 'f', so we
- -- have to put 'f' in the avoids list before we get to the first
- -- decl. tidyTopId then does a no-op on exported binders.
- ; let prs = pcs_PRS pcs
- orig_ns = prsOrig prs
-
- init_tidy_env = (orig_ns, initTidyOccEnv avoids, emptyVarEnv)
- avoids = [getOccName name | bndr <- typeEnvIds env_tc,
- let name = idName bndr,
- isExternalName name]
- -- In computing our "avoids" list, we must include
- -- all implicit Ids
- -- all things with global names (assigned once and for
- -- all by the renamer)
- -- since their names are "taken".
- -- The type environment is a convenient source of such things.
-
- ; let ((orig_ns', occ_env, subst_env), tidy_binds)
- = mapAccumL (tidyTopBind mod ext_ids cg_info_env)
- init_tidy_env binds_in
-
- ; let tidy_rules = tidyIdCoreRules (occ_env,subst_env) ext_rules
-
- ; let prs' = prs { prsOrig = orig_ns' }
- pcs' = pcs { pcs_PRS = prs' }
-
- ; let final_ids = [ id
- | bind <- tidy_binds
- , id <- bindersOf bind
- , isExternalName (idName id)]
-
- -- Dfuns are local Ids that might have
- -- changed their unique during tidying
- ; let lookup_dfun_id id = lookupVarEnv subst_env id `orElse`
- pprPanic "lookup_dfun_id" (ppr id)
-
-
- ; let tidy_type_env = mkFinalTypeEnv env_tc final_ids
- tidy_dfun_ids = map lookup_dfun_id insts_tc
-
- ; let tidy_details = ModDetails { md_types = tidy_type_env,
- md_rules = tidy_rules,
- md_insts = tidy_dfun_ids,
- md_binds = tidy_binds }
-
- ; endPass dflags "Tidy Core" Opt_D_dump_simpl tidy_binds
- ; dumpIfSet_core dflags Opt_D_dump_simpl
- "Tidy Core Rules"
- (pprIdRules tidy_rules)
-
- ; return (pcs', tidy_details)
- }
-
-tidyCoreExpr :: CoreExpr -> IO CoreExpr
-tidyCoreExpr expr = return (tidyExpr emptyTidyEnv expr)
-\end{code}
-
-
-%************************************************************************
-%* *
-\subsection{Write a new interface file}
-%* *
-%************************************************************************
-
-\begin{code}
-mkFinalTypeEnv :: TypeEnv -- From typechecker
- -> [Id] -- Final Ids
- -> TypeEnv
-
-mkFinalTypeEnv type_env final_ids
- = extendTypeEnvList (filterNameEnv keep_it type_env)
- (map AnId final_ids)
- where
- -- The competed type environment is gotten from
- -- a) keeping the types and classes
- -- b) removing all Ids,
- -- c) adding Ids with correct IdInfo, including unfoldings,
- -- gotten from the bindings
- -- From (c) we keep only those Ids with Global names;
- -- the CoreTidy pass makes sure these are all and only
- -- the externally-accessible ones
- -- This truncates the type environment to include only the
- -- exported Ids and things needed from them, which saves space
- --
- -- However, we do keep things like constructors, which should not appear
- -- in interface files, because they are needed by importing modules when
- -- using the compilation manager
-
- -- We keep implicit Ids, because they won't appear
- -- in the bindings from which final_ids are derived!
- keep_it (AnId id) = isImplicitId id -- Remove all Ids except implicit ones
- keep_it other = True -- Keep all TyCons and Classes
-\end{code}
-
-\begin{code}
-findExternalRules :: [CoreBind]
- -> [IdCoreRule] -- Orphan rules
- -> IdEnv a -- Ids that are exported, so we need their rules
- -> [IdCoreRule]
- -- The complete rules are gotten by combining
- -- a) the orphan rules
- -- b) rules embedded in the top-level Ids
-findExternalRules binds orphan_rules ext_ids
- | opt_OmitInterfacePragmas = []
- | otherwise
- = filter needed_rule (orphan_rules ++ local_rules)
- where
- local_rules = [ rule
- | id <- bindersOfBinds binds,
- id `elemVarEnv` ext_ids,
- rule <- idCoreRules id
- ]
- needed_rule (id, rule)
- = not (isBuiltinRule rule)
- -- We can't print builtin rules in interface files
- -- Since they are built in, an importing module
- -- will have access to them anyway
-
- && not (any internal_id (varSetElems (ruleLhsFreeIds rule)))
- -- Don't export a rule whose LHS mentions an Id that
- -- is completely internal (i.e. not visible to an
- -- importing module)
-
- internal_id id = isLocalId id && not (id `elemVarEnv` ext_ids)
-\end{code}
-
-%************************************************************************
-%* *
-\subsection{Step 1: finding externals}
-%* *
-%************************************************************************
-
-\begin{code}
-findExternalSet :: [CoreBind] -> [IdCoreRule]
- -> IdEnv Bool -- In domain => external
- -- Range = True <=> show unfolding
- -- Step 1 from the notes above
-findExternalSet binds orphan_rules
- = foldr find init_needed binds
- where
- orphan_rule_ids :: IdSet
- orphan_rule_ids = unionVarSets [ ruleRhsFreeVars rule
- | (_, rule) <- orphan_rules]
- init_needed :: IdEnv Bool
- init_needed = mapUFM (\_ -> False) orphan_rule_ids
- -- The mapUFM is a bit cheesy. It is a cheap way
- -- to turn the set of orphan_rule_ids, which we use to initialise
- -- the sweep, into a mapping saying 'don't expose unfolding'
- -- (When we come to the binding site we may change our mind, of course.)
-
- find (NonRec id rhs) needed
- | need_id needed id = addExternal (id,rhs) needed
- | otherwise = needed
- find (Rec prs) needed = find_prs prs needed
-
- -- For a recursive group we have to look for a fixed point
- find_prs prs needed
- | null needed_prs = needed
- | otherwise = find_prs other_prs new_needed
- where
- (needed_prs, other_prs) = partition (need_pr needed) prs
- new_needed = foldr addExternal needed needed_prs
-
- -- The 'needed' set contains the Ids that are needed by earlier
- -- interface file emissions. If the Id isn't in this set, and isn't
- -- exported, there's no need to emit anything
- need_id needed_set id = id `elemVarEnv` needed_set || isExportedId id
- need_pr needed_set (id,rhs) = need_id needed_set id
-
-addExternal :: (Id,CoreExpr) -> IdEnv Bool -> IdEnv Bool
--- The Id is needed; extend the needed set
--- with it and its dependents (free vars etc)
-addExternal (id,rhs) needed
- = extendVarEnv (foldVarSet add_occ needed new_needed_ids)
- id show_unfold
- where
- add_occ id needed = extendVarEnv needed id False
- -- "False" because we don't know we need the Id's unfolding
- -- We'll override it later when we find the binding site
-
- new_needed_ids | opt_OmitInterfacePragmas = emptyVarSet
- | otherwise = worker_ids `unionVarSet`
- unfold_ids `unionVarSet`
- spec_ids
-
- idinfo = idInfo id
- dont_inline = isNeverActive (inlinePragInfo idinfo)
- loop_breaker = isLoopBreaker (occInfo idinfo)
- bottoming_fn = isBottomingSig (newStrictnessInfo idinfo `orElse` topSig)
- spec_ids = rulesRhsFreeVars (specInfo idinfo)
- worker_info = workerInfo idinfo
-
- -- Stuff to do with the Id's unfolding
- -- The simplifier has put an up-to-date unfolding
- -- in the IdInfo, but the RHS will do just as well
- unfolding = unfoldingInfo idinfo
- rhs_is_small = not (neverUnfold unfolding)
-
- -- We leave the unfolding there even if there is a worker
- -- In GHCI the unfolding is used by importers
- -- When writing an interface file, we omit the unfolding
- -- if there is a worker
- show_unfold = not bottoming_fn && -- Not necessary
- not dont_inline &&
- not loop_breaker &&
- rhs_is_small && -- Small enough
- okToUnfoldInHiFile rhs -- No casms etc
-
- unfold_ids | show_unfold = exprSomeFreeVars isLocalId rhs
- | otherwise = emptyVarSet
-
- worker_ids = case worker_info of
- HasWorker work_id _ -> unitVarSet work_id
- otherwise -> emptyVarSet
-\end{code}
-
-
-%************************************************************************
-%* *
-\subsection{Step 2: top-level tidying}
-%* *
-%************************************************************************
-
-
-\begin{code}
-type TopTidyEnv = (NameSupply, TidyOccEnv, VarEnv Var)
-
--- TopTidyEnv: when tidying we need to know
--- * ns: The NameSupply, containing a unique supply and any pre-ordained Names.
--- These may have arisen because the
--- renamer read in an interface file mentioning M.$wf, say,
--- and assigned it unique r77. If, on this compilation, we've
--- invented an Id whose name is $wf (but with a different unique)
--- we want to rename it to have unique r77, so that we can do easy
--- comparisons with stuff from the interface file
---
--- * occ_env: The TidyOccEnv, which tells us which local occurrences
--- are 'used'
---
--- * subst_env: A Var->Var mapping that substitutes the new Var for the old
-\end{code}
-
-
-\begin{code}
-tidyTopBind :: Module
- -> IdEnv Bool -- Domain = Ids that should be external
- -- True <=> their unfolding is external too
- -> CgInfoEnv
- -> TopTidyEnv -> CoreBind
- -> (TopTidyEnv, CoreBind)
-
-tidyTopBind mod ext_ids cg_info_env top_tidy_env (NonRec bndr rhs)
- = ((orig,occ,subst) , NonRec bndr' rhs')
- where
- ((orig,occ,subst), bndr')
- = tidyTopBinder mod ext_ids cg_info_env
- rec_tidy_env rhs rhs' top_tidy_env bndr
- rec_tidy_env = (occ,subst)
- rhs' = tidyExpr rec_tidy_env rhs
-
-tidyTopBind mod ext_ids cg_info_env top_tidy_env (Rec prs)
- = (final_env, Rec prs')
- where
- (final_env@(_,occ,subst), prs') = mapAccumL do_one top_tidy_env prs
- rec_tidy_env = (occ,subst)
-
- do_one top_tidy_env (bndr,rhs)
- = ((orig,occ,subst), (bndr',rhs'))
- where
- ((orig,occ,subst), bndr')
- = tidyTopBinder mod ext_ids cg_info_env
- rec_tidy_env rhs rhs' top_tidy_env bndr
-
- rhs' = tidyExpr rec_tidy_env rhs
-
-tidyTopBinder :: Module -> IdEnv Bool -> CgInfoEnv
- -> TidyEnv -- The TidyEnv is used to tidy the IdInfo
- -> CoreExpr -- RHS *before* tidying
- -> CoreExpr -- RHS *after* tidying
- -- The TidyEnv and the after-tidying RHS are
- -- both are knot-tied: don't look at them!
- -> TopTidyEnv -> Id -> (TopTidyEnv, Id)
- -- NB: tidyTopBinder doesn't affect the unique supply
-
-tidyTopBinder mod ext_ids cg_info_env rec_tidy_env rhs tidy_rhs
- env@(ns2, occ_env2, subst_env2) id
- -- This function is the heart of Step 2
- -- The rec_tidy_env is the one to use for the IdInfo
- -- It's necessary because when we are dealing with a recursive
- -- group, a variable late in the group might be mentioned
- -- in the IdInfo of one early in the group
-
- -- The rhs is already tidied
-
- = ((orig_env', occ_env', subst_env'), id')
- where
- (orig_env', occ_env', name') = tidyTopName mod ns2 occ_env2
- is_external
- (idName id)
- ty' = tidyTopType (idType id)
- idinfo = tidyTopIdInfo rec_tidy_env is_external
- (idInfo id) unfold_info arity
- (lookupCgInfo cg_info_env name')
-
- id' = mkVanillaGlobal name' ty' idinfo
-
- subst_env' = extendVarEnv subst_env2 id id'
-
- maybe_external = lookupVarEnv ext_ids id
- is_external = isJust maybe_external
-
- -- Expose an unfolding if ext_ids tells us to
- -- Remember that ext_ids maps an Id to a Bool:
- -- True to show the unfolding, False to hide it
- show_unfold = maybe_external `orElse` False
- unfold_info | show_unfold = mkTopUnfolding tidy_rhs
- | otherwise = noUnfolding
-
- -- Usually the Id will have an accurate arity on it, because
- -- the simplifier has just run, but not always.
- -- One case I found was when the last thing the simplifier
- -- did was to let-bind a non-atomic argument and then float
- -- it to the top level. So it seems more robust just to
- -- fix it here.
- arity = exprArity rhs
-
-
-
--- tidyTopIdInfo creates the final IdInfo for top-level
--- binders. There are two delicate pieces:
---
--- * Arity. After CoreTidy, this arity must not change any more.
--- Indeed, CorePrep must eta expand where necessary to make
--- the manifest arity equal to the claimed arity.
---
--- * CAF info, which comes from the CoreToStg pass via a knot.
--- The CAF info will not be looked at by the downstream stuff:
--- it *generates* it, and knot-ties it back. It will only be
--- looked at by (a) MkIface when generating an interface file
--- (b) In GHCi, importing modules
--- Nevertheless, we add the info here so that it propagates to all
--- occurrences of the binders in RHSs, and hence to occurrences in
--- unfoldings, which are inside Ids imported by GHCi. Ditto RULES.
---
--- An alterative would be to do a second pass over the unfoldings
--- of Ids, and rules, right at the top, but that would be a pain.
-
-tidyTopIdInfo tidy_env is_external idinfo unfold_info arity cg_info
- | opt_OmitInterfacePragmas || not is_external
- -- Only basic info if the Id isn't external, or if we don't have -O
- = basic_info
-
- | otherwise -- Add extra optimisation info
- = basic_info
- `setInlinePragInfo` inlinePragInfo idinfo
- `setUnfoldingInfo` unfold_info
- `setWorkerInfo` tidyWorker tidy_env (workerInfo idinfo)
- -- NB: we throw away the Rules
- -- They have already been extracted by findExternalRules
-
- where
- -- baasic_info is attached to every top-level binder
- basic_info = vanillaIdInfo
- `setCgInfo` cg_info
- `setArityInfo` arity
- `setAllStrictnessInfo` newStrictnessInfo idinfo
-
--- This is where we set names to local/global based on whether they really are
--- externally visible (see comment at the top of this module). If the name
--- was previously local, we have to give it a unique occurrence name if
--- we intend to externalise it.
-tidyTopName mod ns occ_env external name
- | global && internal = (ns, occ_env, localiseName name)
-
- | global && external = (ns, occ_env, name)
- -- Global names are assumed to have been allocated by the renamer,
- -- so they already have the "right" unique
- -- And it's a system-wide unique too
-
- | local && internal = (ns_w_local, occ_env', new_local_name)
- -- Even local, internal names must get a unique occurrence, because
- -- if we do -split-objs we externalise the name later, in the code generator
- --
- -- Similarly, we must make sure it has a system-wide Unique, because
- -- the byte-code generator builds a system-wide Name->BCO symbol table
-
- | local && external = case lookupFM ns_names key of
- Just orig -> (ns, occ_env', orig)
- Nothing -> (ns_w_global, occ_env', new_external_name)
- -- If we want to externalise a currently-local name, check
- -- whether we have already assigned a unique for it.
- -- If so, use it; if not, extend the table (ns_w_global).
- -- This is needed when *re*-compiling a module in GHCi; we want to
- -- use the same name for externally-visible things as we did before.
-
- where
- global = isExternalName name
- local = not global
- internal = not external
-
- (occ_env', occ') = tidyOccName occ_env (nameOccName name)
- key = (moduleName mod, occ')
- ns_names = nsNames ns
- ns_uniqs = nsUniqs ns
- (us1, us2) = splitUniqSupply ns_uniqs
- uniq = uniqFromSupply us1
- loc = nameSrcLoc name
-
- new_local_name = mkInternalName uniq occ' loc
- new_external_name = mkExternalName uniq mod occ' loc
-
- ns_w_local = ns { nsUniqs = us2 }
- ns_w_global = ns { nsUniqs = us2, nsNames = addToFM ns_names key new_external_name }
-
-
------------- Worker --------------
-tidyWorker tidy_env (HasWorker work_id wrap_arity)
- = HasWorker (tidyVarOcc tidy_env work_id) wrap_arity
-tidyWorker tidy_env other
- = NoWorker
-
------------- Rules --------------
-tidyIdRules :: Id -> [IdCoreRule]
-tidyIdRules id = tidyIdCoreRules emptyTidyEnv (idCoreRules id)
-
-tidyIdCoreRules :: TidyEnv -> [IdCoreRule] -> [IdCoreRule]
-tidyIdCoreRules env [] = []
-tidyIdCoreRules env ((fn,rule) : rules)
- = tidyRule env rule =: \ rule ->
- tidyIdCoreRules env rules =: \ rules ->
- ((tidyVarOcc env fn, rule) : rules)
-
-tidyRule :: TidyEnv -> CoreRule -> CoreRule
-tidyRule env rule@(BuiltinRule _ _) = rule
-tidyRule env (Rule name act vars tpl_args rhs)
- = tidyBndrs env vars =: \ (env', vars) ->
- map (tidyExpr env') tpl_args =: \ tpl_args ->
- (Rule name act vars tpl_args (tidyExpr env' rhs))
-\end{code}
-
%************************************************************************
%* *
-\subsection{Step 2: inner tidying
+\subsection{Tidying expressions, rules}
%* *
%************************************************************************
(env', Rec (zip bndrs' rhss'))
+------------ Expressions --------------
+tidyCoreExpr :: CoreExpr -> IO CoreExpr
+tidyCoreExpr expr = return (tidyExpr emptyTidyEnv expr)
+
tidyExpr env (Var v) = Var (tidyVarOcc env v)
tidyExpr env (Type ty) = Type (tidyType env ty)
tidyExpr env (Lit lit) = Lit lit
= tidyBndr env b =: \ (env', b) ->
Lam b (tidyExpr env' e)
-
+------------ Case alternatives --------------
tidyAlt env (con, vs, rhs)
= tidyBndrs env vs =: \ (env', vs) ->
(con, vs, tidyExpr env' rhs)
+------------ Notes --------------
tidyNote env (Coerce t1 t2) = Coerce (tidyType env t1) (tidyType env t2)
tidyNote env note = note
+
+
+------------ Rules --------------
+tidyIdRules :: TidyEnv -> [IdCoreRule] -> [IdCoreRule]
+tidyIdRules env [] = []
+tidyIdRules env ((fn,rule) : rules)
+ = tidyRule env rule =: \ rule ->
+ tidyIdRules env rules =: \ rules ->
+ ((tidyVarOcc env fn, rule) : rules)
+
+tidyRule :: TidyEnv -> CoreRule -> CoreRule
+tidyRule env rule@(BuiltinRule _ _) = rule
+tidyRule env (Rule name act vars tpl_args rhs)
+ = tidyBndrs env vars =: \ (env', vars) ->
+ map (tidyExpr env') tpl_args =: \ tpl_args ->
+ (Rule name act vars tpl_args (tidyExpr env' rhs))
+
+pprTidyIdRules :: Id -> SDoc
+pprTidyIdRules id = pprIdRules (tidyIdRules emptyTidyEnv (idCoreRules id))
\end{code}
%************************************************************************
%* *
-\subsection{Tidying up non-top-level binders}
+\subsection{Tidying non-top-level binders}
%* *
%************************************************************************
\begin{code}
-tidyVarOcc (_, var_env) v = case lookupVarEnv var_env v of
- Just v' -> v'
- Nothing -> v
+tidyVarOcc :: TidyEnv -> Var -> Var
+tidyVarOcc (_, var_env) v = lookupVarEnv var_env v `orElse` v
-- tidyBndr is used for lambda and case binders
tidyBndr :: TidyEnv -> Var -> (TidyEnv, Var)
\begin{code}
m =: k = m `seq` k m
\end{code}
+
+
#ifdef GHCI
import Interpreter
import ByteCodeGen ( byteCodeGen )
-import CoreTidy ( tidyCoreExpr )
+import TidyPgm ( tidyCoreExpr )
import CorePrep ( corePrepExpr )
import Rename ( renameStmt, renameRdrName, slurpIface )
import RdrName ( rdrNameOcc, setRdrNameOcc )
import Flattening ( flatten, flattenExpr )
import SimplCore
import CoreUtils ( coreBindsSize )
-import CoreTidy ( tidyCorePgm )
+import TidyPgm ( tidyCorePgm )
import CorePrep ( corePrepPgm )
import StgSyn
import CoreToStg ( coreToStg )
--- /dev/null
+%
+% (c) The GRASP/AQUA Project, Glasgow University, 1992-1998
+%
+\section{Tidying up Core}
+
+\begin{code}
+module TidyPgm( tidyCorePgm, tidyCoreExpr ) where
+
+#include "HsVersions.h"
+
+import CmdLineOpts ( DynFlags, DynFlag(..), opt_OmitInterfacePragmas )
+import CoreSyn
+import CoreUnfold ( noUnfolding, mkTopUnfolding, okToUnfoldInHiFile )
+import CoreFVs ( ruleLhsFreeIds, ruleRhsFreeVars, exprSomeFreeVars )
+import CoreTidy ( tidyExpr, tidyVarOcc, tidyIdRules )
+import PprCore ( pprIdRules )
+import CoreLint ( showPass, endPass )
+import CoreUtils ( exprArity )
+import VarEnv
+import VarSet
+import Var ( Id, Var )
+import Id ( idType, idInfo, idName, idCoreRules,
+ isExportedId, idUnique, mkVanillaGlobal, isLocalId,
+ isImplicitId, mkUserLocal, setIdInfo
+ )
+import IdInfo {- loads of stuff -}
+import NewDemand ( isBottomingSig, topSig )
+import BasicTypes ( isNeverActive )
+import Name ( getOccName, nameOccName, mkInternalName, mkExternalName,
+ localiseName, isExternalName, nameSrcLoc
+ )
+import NameEnv ( filterNameEnv )
+import OccName ( TidyOccEnv, initTidyOccEnv, tidyOccName )
+import Type ( tidyTopType )
+import Module ( Module, moduleName )
+import HscTypes ( PersistentCompilerState( pcs_PRS ),
+ PersistentRenamerState( prsOrig ),
+ NameSupply( nsNames, nsUniqs ),
+ TypeEnv, extendTypeEnvList, typeEnvIds,
+ ModDetails(..), TyThing(..)
+ )
+import FiniteMap ( lookupFM, addToFM )
+import Maybes ( orElse )
+import ErrUtils ( showPass, dumpIfSet_core )
+import SrcLoc ( noSrcLoc )
+import UniqFM ( mapUFM )
+import UniqSupply ( splitUniqSupply, uniqFromSupply )
+import List ( partition )
+import Util ( mapAccumL )
+import Maybe ( isJust )
+import Outputable
+\end{code}
+
+
+
+%************************************************************************
+%* *
+\subsection{What goes on}
+%* *
+%************************************************************************
+
+[SLPJ: 19 Nov 00]
+
+The plan is this.
+
+Step 1: Figure out external Ids
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+First we figure out which Ids are "external" Ids. An
+"external" Id is one that is visible from outside the compilation
+unit. These are
+ a) the user exported ones
+ b) ones mentioned in the unfoldings, workers,
+ or rules of externally-visible ones
+This exercise takes a sweep of the bindings bottom to top. Actually,
+in Step 2 we're also going to need to know which Ids should be
+exported with their unfoldings, so we produce not an IdSet but an
+IdEnv Bool
+
+
+Step 2: Tidy the program
+~~~~~~~~~~~~~~~~~~~~~~~~
+Next we traverse the bindings top to bottom. For each *top-level*
+binder
+
+ 1. Make it into a GlobalId
+
+ 2. Give it a system-wide Unique.
+ [Even non-exported things need system-wide Uniques because the
+ byte-code generator builds a single Name->BCO symbol table.]
+
+ We use the NameSupply kept in the PersistentRenamerState as the
+ source of such system-wide uniques.
+
+ For external Ids, use the original-name cache in the NameSupply
+ to ensure that the unique assigned is the same as the Id had
+ in any previous compilation run.
+
+ 3. If it's an external Id, make it have a global Name, otherwise
+ make it have a local Name.
+ This is used by the code generator to decide whether
+ to make the label externally visible
+
+ 4. Give external Ids a "tidy" occurrence name. This means
+ we can print them in interface files without confusing
+ "x" (unique 5) with "x" (unique 10).
+
+ 5. Give it its UTTERLY FINAL IdInfo; in ptic,
+ * Its IdDetails becomes VanillaGlobal, reflecting the fact that
+ from now on we regard it as a global, not local, Id
+
+ * its unfolding, if it should have one
+
+ * its arity, computed from the number of visible lambdas
+
+ * its CAF info, computed from what is free in its RHS
+
+
+Finally, substitute these new top-level binders consistently
+throughout, including in unfoldings. We also tidy binders in
+RHSs, so that they print nicely in interfaces.
+
+\begin{code}
+tidyCorePgm :: DynFlags -> Module
+ -> PersistentCompilerState
+ -> CgInfoEnv -- Information from the back end,
+ -- to be splatted into the IdInfo
+ -> ModDetails
+ -> IO (PersistentCompilerState, ModDetails)
+
+tidyCorePgm dflags mod pcs cg_info_env
+ (ModDetails { md_types = env_tc, md_insts = insts_tc,
+ md_binds = binds_in, md_rules = orphans_in })
+ = do { showPass dflags "Tidy Core"
+
+ ; let ext_ids = findExternalSet binds_in orphans_in
+ ; let ext_rules = findExternalRules binds_in orphans_in ext_ids
+ -- findExternalRules filters ext_rules to avoid binders that
+ -- aren't externally visible; but the externally-visible binders
+ -- are computed (by findExternalSet) assuming that all orphan
+ -- rules are exported. So in fact we may export more than we
+ -- need. (It's a sort of mutual recursion.)
+
+ -- We also make sure to avoid any exported binders. Consider
+ -- f{-u1-} = 1 -- Local decl
+ -- ...
+ -- f{-u2-} = 2 -- Exported decl
+ --
+ -- The second exported decl must 'get' the name 'f', so we
+ -- have to put 'f' in the avoids list before we get to the first
+ -- decl. tidyTopId then does a no-op on exported binders.
+ ; let prs = pcs_PRS pcs
+ orig_ns = prsOrig prs
+
+ init_tidy_env = (orig_ns, initTidyOccEnv avoids, emptyVarEnv)
+ avoids = [getOccName name | bndr <- typeEnvIds env_tc,
+ let name = idName bndr,
+ isExternalName name]
+ -- In computing our "avoids" list, we must include
+ -- all implicit Ids
+ -- all things with global names (assigned once and for
+ -- all by the renamer)
+ -- since their names are "taken".
+ -- The type environment is a convenient source of such things.
+
+ ; let ((orig_ns', occ_env, subst_env), tidy_binds)
+ = mapAccumL (tidyTopBind mod ext_ids cg_info_env)
+ init_tidy_env binds_in
+
+ ; let tidy_rules = tidyIdRules (occ_env,subst_env) ext_rules
+
+ ; let prs' = prs { prsOrig = orig_ns' }
+ pcs' = pcs { pcs_PRS = prs' }
+
+ ; let final_ids = [ id
+ | bind <- tidy_binds
+ , id <- bindersOf bind
+ , isExternalName (idName id)]
+
+ -- Dfuns are local Ids that might have
+ -- changed their unique during tidying
+ ; let lookup_dfun_id id = lookupVarEnv subst_env id `orElse`
+ pprPanic "lookup_dfun_id" (ppr id)
+
+
+ ; let tidy_type_env = mkFinalTypeEnv env_tc final_ids
+ tidy_dfun_ids = map lookup_dfun_id insts_tc
+
+ ; let tidy_details = ModDetails { md_types = tidy_type_env,
+ md_rules = tidy_rules,
+ md_insts = tidy_dfun_ids,
+ md_binds = tidy_binds }
+
+ ; endPass dflags "Tidy Core" Opt_D_dump_simpl tidy_binds
+ ; dumpIfSet_core dflags Opt_D_dump_simpl
+ "Tidy Core Rules"
+ (pprIdRules tidy_rules)
+
+ ; return (pcs', tidy_details)
+ }
+
+tidyCoreExpr :: CoreExpr -> IO CoreExpr
+tidyCoreExpr expr = return (tidyExpr emptyTidyEnv expr)
+\end{code}
+
+
+%************************************************************************
+%* *
+\subsection{Write a new interface file}
+%* *
+%************************************************************************
+
+\begin{code}
+mkFinalTypeEnv :: TypeEnv -- From typechecker
+ -> [Id] -- Final Ids
+ -> TypeEnv
+
+mkFinalTypeEnv type_env final_ids
+ = extendTypeEnvList (filterNameEnv keep_it type_env)
+ (map AnId final_ids)
+ where
+ -- The competed type environment is gotten from
+ -- a) keeping the types and classes
+ -- b) removing all Ids,
+ -- c) adding Ids with correct IdInfo, including unfoldings,
+ -- gotten from the bindings
+ -- From (c) we keep only those Ids with Global names;
+ -- the CoreTidy pass makes sure these are all and only
+ -- the externally-accessible ones
+ -- This truncates the type environment to include only the
+ -- exported Ids and things needed from them, which saves space
+ --
+ -- However, we do keep things like constructors, which should not appear
+ -- in interface files, because they are needed by importing modules when
+ -- using the compilation manager
+
+ -- We keep implicit Ids, because they won't appear
+ -- in the bindings from which final_ids are derived!
+ keep_it (AnId id) = isImplicitId id -- Remove all Ids except implicit ones
+ keep_it other = True -- Keep all TyCons and Classes
+\end{code}
+
+\begin{code}
+findExternalRules :: [CoreBind]
+ -> [IdCoreRule] -- Orphan rules
+ -> IdEnv a -- Ids that are exported, so we need their rules
+ -> [IdCoreRule]
+ -- The complete rules are gotten by combining
+ -- a) the orphan rules
+ -- b) rules embedded in the top-level Ids
+findExternalRules binds orphan_rules ext_ids
+ | opt_OmitInterfacePragmas = []
+ | otherwise
+ = filter needed_rule (orphan_rules ++ local_rules)
+ where
+ local_rules = [ rule
+ | id <- bindersOfBinds binds,
+ id `elemVarEnv` ext_ids,
+ rule <- idCoreRules id
+ ]
+ needed_rule (id, rule)
+ = not (isBuiltinRule rule)
+ -- We can't print builtin rules in interface files
+ -- Since they are built in, an importing module
+ -- will have access to them anyway
+
+ && not (any internal_id (varSetElems (ruleLhsFreeIds rule)))
+ -- Don't export a rule whose LHS mentions an Id that
+ -- is completely internal (i.e. not visible to an
+ -- importing module)
+
+ internal_id id = isLocalId id && not (id `elemVarEnv` ext_ids)
+\end{code}
+
+%************************************************************************
+%* *
+\subsection{Step 1: finding externals}
+%* *
+%************************************************************************
+
+\begin{code}
+findExternalSet :: [CoreBind] -> [IdCoreRule]
+ -> IdEnv Bool -- In domain => external
+ -- Range = True <=> show unfolding
+ -- Step 1 from the notes above
+findExternalSet binds orphan_rules
+ = foldr find init_needed binds
+ where
+ orphan_rule_ids :: IdSet
+ orphan_rule_ids = unionVarSets [ ruleRhsFreeVars rule
+ | (_, rule) <- orphan_rules]
+ init_needed :: IdEnv Bool
+ init_needed = mapUFM (\_ -> False) orphan_rule_ids
+ -- The mapUFM is a bit cheesy. It is a cheap way
+ -- to turn the set of orphan_rule_ids, which we use to initialise
+ -- the sweep, into a mapping saying 'don't expose unfolding'
+ -- (When we come to the binding site we may change our mind, of course.)
+
+ find (NonRec id rhs) needed
+ | need_id needed id = addExternal (id,rhs) needed
+ | otherwise = needed
+ find (Rec prs) needed = find_prs prs needed
+
+ -- For a recursive group we have to look for a fixed point
+ find_prs prs needed
+ | null needed_prs = needed
+ | otherwise = find_prs other_prs new_needed
+ where
+ (needed_prs, other_prs) = partition (need_pr needed) prs
+ new_needed = foldr addExternal needed needed_prs
+
+ -- The 'needed' set contains the Ids that are needed by earlier
+ -- interface file emissions. If the Id isn't in this set, and isn't
+ -- exported, there's no need to emit anything
+ need_id needed_set id = id `elemVarEnv` needed_set || isExportedId id
+ need_pr needed_set (id,rhs) = need_id needed_set id
+
+addExternal :: (Id,CoreExpr) -> IdEnv Bool -> IdEnv Bool
+-- The Id is needed; extend the needed set
+-- with it and its dependents (free vars etc)
+addExternal (id,rhs) needed
+ = extendVarEnv (foldVarSet add_occ needed new_needed_ids)
+ id show_unfold
+ where
+ add_occ id needed = extendVarEnv needed id False
+ -- "False" because we don't know we need the Id's unfolding
+ -- We'll override it later when we find the binding site
+
+ new_needed_ids | opt_OmitInterfacePragmas = emptyVarSet
+ | otherwise = worker_ids `unionVarSet`
+ unfold_ids `unionVarSet`
+ spec_ids
+
+ idinfo = idInfo id
+ dont_inline = isNeverActive (inlinePragInfo idinfo)
+ loop_breaker = isLoopBreaker (occInfo idinfo)
+ bottoming_fn = isBottomingSig (newStrictnessInfo idinfo `orElse` topSig)
+ spec_ids = rulesRhsFreeVars (specInfo idinfo)
+ worker_info = workerInfo idinfo
+
+ -- Stuff to do with the Id's unfolding
+ -- The simplifier has put an up-to-date unfolding
+ -- in the IdInfo, but the RHS will do just as well
+ unfolding = unfoldingInfo idinfo
+ rhs_is_small = not (neverUnfold unfolding)
+
+ -- We leave the unfolding there even if there is a worker
+ -- In GHCI the unfolding is used by importers
+ -- When writing an interface file, we omit the unfolding
+ -- if there is a worker
+ show_unfold = not bottoming_fn && -- Not necessary
+ not dont_inline &&
+ not loop_breaker &&
+ rhs_is_small && -- Small enough
+ okToUnfoldInHiFile rhs -- No casms etc
+
+ unfold_ids | show_unfold = exprSomeFreeVars isLocalId rhs
+ | otherwise = emptyVarSet
+
+ worker_ids = case worker_info of
+ HasWorker work_id _ -> unitVarSet work_id
+ otherwise -> emptyVarSet
+\end{code}
+
+
+%************************************************************************
+%* *
+\subsection{Step 2: top-level tidying}
+%* *
+%************************************************************************
+
+
+\begin{code}
+type TopTidyEnv = (NameSupply, TidyOccEnv, VarEnv Var)
+
+-- TopTidyEnv: when tidying we need to know
+-- * ns: The NameSupply, containing a unique supply and any pre-ordained Names.
+-- These may have arisen because the
+-- renamer read in an interface file mentioning M.$wf, say,
+-- and assigned it unique r77. If, on this compilation, we've
+-- invented an Id whose name is $wf (but with a different unique)
+-- we want to rename it to have unique r77, so that we can do easy
+-- comparisons with stuff from the interface file
+--
+-- * occ_env: The TidyOccEnv, which tells us which local occurrences
+-- are 'used'
+--
+-- * subst_env: A Var->Var mapping that substitutes the new Var for the old
+\end{code}
+
+
+\begin{code}
+tidyTopBind :: Module
+ -> IdEnv Bool -- Domain = Ids that should be external
+ -- True <=> their unfolding is external too
+ -> CgInfoEnv
+ -> TopTidyEnv -> CoreBind
+ -> (TopTidyEnv, CoreBind)
+
+tidyTopBind mod ext_ids cg_info_env top_tidy_env (NonRec bndr rhs)
+ = ((orig,occ,subst) , NonRec bndr' rhs')
+ where
+ ((orig,occ,subst), bndr')
+ = tidyTopBinder mod ext_ids cg_info_env
+ rec_tidy_env rhs rhs' top_tidy_env bndr
+ rec_tidy_env = (occ,subst)
+ rhs' = tidyExpr rec_tidy_env rhs
+
+tidyTopBind mod ext_ids cg_info_env top_tidy_env (Rec prs)
+ = (final_env, Rec prs')
+ where
+ (final_env@(_,occ,subst), prs') = mapAccumL do_one top_tidy_env prs
+ rec_tidy_env = (occ,subst)
+
+ do_one top_tidy_env (bndr,rhs)
+ = ((orig,occ,subst), (bndr',rhs'))
+ where
+ ((orig,occ,subst), bndr')
+ = tidyTopBinder mod ext_ids cg_info_env
+ rec_tidy_env rhs rhs' top_tidy_env bndr
+
+ rhs' = tidyExpr rec_tidy_env rhs
+
+tidyTopBinder :: Module -> IdEnv Bool -> CgInfoEnv
+ -> TidyEnv -- The TidyEnv is used to tidy the IdInfo
+ -> CoreExpr -- RHS *before* tidying
+ -> CoreExpr -- RHS *after* tidying
+ -- The TidyEnv and the after-tidying RHS are
+ -- both are knot-tied: don't look at them!
+ -> TopTidyEnv -> Id -> (TopTidyEnv, Id)
+ -- NB: tidyTopBinder doesn't affect the unique supply
+
+tidyTopBinder mod ext_ids cg_info_env rec_tidy_env rhs tidy_rhs
+ env@(ns2, occ_env2, subst_env2) id
+ -- This function is the heart of Step 2
+ -- The rec_tidy_env is the one to use for the IdInfo
+ -- It's necessary because when we are dealing with a recursive
+ -- group, a variable late in the group might be mentioned
+ -- in the IdInfo of one early in the group
+
+ -- The rhs is already tidied
+
+ = ((orig_env', occ_env', subst_env'), id')
+ where
+ (orig_env', occ_env', name') = tidyTopName mod ns2 occ_env2
+ is_external
+ (idName id)
+ ty' = tidyTopType (idType id)
+ idinfo = tidyTopIdInfo rec_tidy_env is_external
+ (idInfo id) unfold_info arity
+ (lookupCgInfo cg_info_env name')
+
+ id' = mkVanillaGlobal name' ty' idinfo
+
+ subst_env' = extendVarEnv subst_env2 id id'
+
+ maybe_external = lookupVarEnv ext_ids id
+ is_external = isJust maybe_external
+
+ -- Expose an unfolding if ext_ids tells us to
+ -- Remember that ext_ids maps an Id to a Bool:
+ -- True to show the unfolding, False to hide it
+ show_unfold = maybe_external `orElse` False
+ unfold_info | show_unfold = mkTopUnfolding tidy_rhs
+ | otherwise = noUnfolding
+
+ -- Usually the Id will have an accurate arity on it, because
+ -- the simplifier has just run, but not always.
+ -- One case I found was when the last thing the simplifier
+ -- did was to let-bind a non-atomic argument and then float
+ -- it to the top level. So it seems more robust just to
+ -- fix it here.
+ arity = exprArity rhs
+
+
+
+-- tidyTopIdInfo creates the final IdInfo for top-level
+-- binders. There are two delicate pieces:
+--
+-- * Arity. After CoreTidy, this arity must not change any more.
+-- Indeed, CorePrep must eta expand where necessary to make
+-- the manifest arity equal to the claimed arity.
+--
+-- * CAF info, which comes from the CoreToStg pass via a knot.
+-- The CAF info will not be looked at by the downstream stuff:
+-- it *generates* it, and knot-ties it back. It will only be
+-- looked at by (a) MkIface when generating an interface file
+-- (b) In GHCi, importing modules
+-- Nevertheless, we add the info here so that it propagates to all
+-- occurrences of the binders in RHSs, and hence to occurrences in
+-- unfoldings, which are inside Ids imported by GHCi. Ditto RULES.
+--
+-- An alterative would be to do a second pass over the unfoldings
+-- of Ids, and rules, right at the top, but that would be a pain.
+
+tidyTopIdInfo tidy_env is_external idinfo unfold_info arity cg_info
+ | opt_OmitInterfacePragmas || not is_external
+ -- Only basic info if the Id isn't external, or if we don't have -O
+ = basic_info
+
+ | otherwise -- Add extra optimisation info
+ = basic_info
+ `setInlinePragInfo` inlinePragInfo idinfo
+ `setUnfoldingInfo` unfold_info
+ `setWorkerInfo` tidyWorker tidy_env (workerInfo idinfo)
+ -- NB: we throw away the Rules
+ -- They have already been extracted by findExternalRules
+
+ where
+ -- baasic_info is attached to every top-level binder
+ basic_info = vanillaIdInfo
+ `setCgInfo` cg_info
+ `setArityInfo` arity
+ `setAllStrictnessInfo` newStrictnessInfo idinfo
+
+-- This is where we set names to local/global based on whether they really are
+-- externally visible (see comment at the top of this module). If the name
+-- was previously local, we have to give it a unique occurrence name if
+-- we intend to externalise it.
+tidyTopName mod ns occ_env external name
+ | global && internal = (ns, occ_env, localiseName name)
+
+ | global && external = (ns, occ_env, name)
+ -- Global names are assumed to have been allocated by the renamer,
+ -- so they already have the "right" unique
+ -- And it's a system-wide unique too
+
+ | local && internal = (ns_w_local, occ_env', new_local_name)
+ -- Even local, internal names must get a unique occurrence, because
+ -- if we do -split-objs we externalise the name later, in the code generator
+ --
+ -- Similarly, we must make sure it has a system-wide Unique, because
+ -- the byte-code generator builds a system-wide Name->BCO symbol table
+
+ | local && external = case lookupFM ns_names key of
+ Just orig -> (ns, occ_env', orig)
+ Nothing -> (ns_w_global, occ_env', new_external_name)
+ -- If we want to externalise a currently-local name, check
+ -- whether we have already assigned a unique for it.
+ -- If so, use it; if not, extend the table (ns_w_global).
+ -- This is needed when *re*-compiling a module in GHCi; we want to
+ -- use the same name for externally-visible things as we did before.
+
+ where
+ global = isExternalName name
+ local = not global
+ internal = not external
+
+ (occ_env', occ') = tidyOccName occ_env (nameOccName name)
+ key = (moduleName mod, occ')
+ ns_names = nsNames ns
+ ns_uniqs = nsUniqs ns
+ (us1, us2) = splitUniqSupply ns_uniqs
+ uniq = uniqFromSupply us1
+ loc = nameSrcLoc name
+
+ new_local_name = mkInternalName uniq occ' loc
+ new_external_name = mkExternalName uniq mod occ' loc
+
+ ns_w_local = ns { nsUniqs = us2 }
+ ns_w_global = ns { nsUniqs = us2, nsNames = addToFM ns_names key new_external_name }
+
+
+------------ Worker --------------
+tidyWorker tidy_env (HasWorker work_id wrap_arity)
+ = HasWorker (tidyVarOcc tidy_env work_id) wrap_arity
+tidyWorker tidy_env other
+ = NoWorker
+\end{code}
\ No newline at end of file
import OccurAnal ( occurAnalyseRule )
import CoreFVs ( exprFreeVars, ruleRhsFreeVars, ruleLhsFreeIds )
import CoreUnfold ( isCheapUnfolding, unfoldingTemplate )
-import CoreTidy ( tidyIdRules )
import CoreUtils ( eqExpr )
-import PprCore ( pprIdRules )
+import CoreTidy ( pprTidyIdRules )
import Subst ( Subst, InScopeSet, mkInScopeSet, lookupSubst, extendSubst,
substEnv, setSubstEnv, emptySubst, isInScope, emptyInScopeSet,
bindSubstList, unBindSubstList, substInScope, uniqAway
-- locally defined ones!!
pprRuleBase :: RuleBase -> SDoc
-pprRuleBase (RuleBase rules _) = vcat [ pprIdRules (tidyIdRules id)
- | id <- varSetElems rules ]
+pprRuleBase (RuleBase rules _) = vcat [ pprTidyIdRules id | id <- varSetElems rules ]
\end{code}
import CoreLint ( showPass, endPass )
import CoreUtils ( exprType, eqExpr, mkPiTypes )
import CoreFVs ( exprsFreeVars )
-import CoreTidy ( tidyIdRules )
+import CoreTidy ( pprTidyIdRules )
import WwLib ( mkWorkerArgs )
import DataCon ( dataConRepArity )
import Type ( tyConAppArgs )
-import PprCore ( pprIdRules )
import Id ( Id, idName, idType, idSpecialisation,
isDataConId_maybe,
mkUserLocal, mkSysLocal )
endPass dflags "SpecConstr" Opt_D_dump_spec binds'
dumpIfSet_dyn dflags Opt_D_dump_rules "Top-level specialisations"
- (vcat (map dump_specs (concat (map bindersOf binds'))))
+ (vcat (map pprTidyIdRules (concat (map bindersOf binds'))))
return binds'
where
go env (bind:binds) = scBind env bind `thenUs` \ (env', _, bind') ->
go env' binds `thenUs` \ binds' ->
returnUs (bind' : binds')
-
- dump_specs var = pprIdRules (tidyIdRules var)
\end{code}
import CoreSyn
import CoreUtils ( applyTypeToArgs )
import CoreFVs ( exprFreeVars, exprsFreeVars )
-import CoreTidy ( tidyIdRules )
+import CoreTidy ( pprTidyIdRules )
import CoreLint ( showPass, endPass )
-import PprCore ( pprIdRules )
import Rules ( addIdSpecialisations, lookupRule )
import UniqSupply ( UniqSupply,
endPass dflags "Specialise" Opt_D_dump_spec binds'
dumpIfSet_dyn dflags Opt_D_dump_rules "Top-level specialisations"
- (vcat (map dump_specs (concat (map bindersOf binds'))))
+ (vcat (map pprTidyIdRules (concat (map bindersOf binds'))))
return binds'
where
- dump_specs var = pprIdRules (tidyIdRules var)
-
-- We need to start with a Subst that knows all the things
-- that are in scope, so that the substitution engine doesn't
-- accidentally re-use a unique that's already in use