From: rrt <unknown>
Date: Wed, 5 Jan 2000 11:20:25 +0000 (+0000)
Subject: [project @ 2000-01-05 11:20:23 by rrt]
X-Git-Tag: Approximately_9120_patches~5352
X-Git-Url: http://git.megacz.com/?a=commitdiff_plain;h=a13f31cc8f8da4e71ee252dfcf838993a16e032f;p=ghc-hetmet.git

[project @ 2000-01-05 11:20:23 by rrt]
VSGML files removed because of conversion from LinuxDoc to DocBook (now
have just SGML files).
---

diff --git a/ghc/docs/users_guide/4-00-notes.vsgml b/ghc/docs/users_guide/4-00-notes.vsgml
deleted file mode 100644
index 3309016..0000000
--- a/ghc/docs/users_guide/4-00-notes.vsgml
+++ /dev/null
@@ -1,168 +0,0 @@
-<sect1>Release notes for version~4.00---10/98
-<label id="release-4-00">
-<p>
-
-<sect2>Language matters
-<p>
-
-<itemize>
-
-<item> Universal and existential quantification: see Section <ref
-name="Explicit universal quantification"
-id="universal-quantification"> and Section <ref name="Existentially
-quantified data constructors" id="existential-quantification">
-respectively.
-
-Universal quantification was in in GHC 2.10 and later, but the
-syntax has changed: it's now @forall a. ...@ instead of @All a => ...@.
-
-<item> Multi-paramter type classes.  We have relaxed some of the rules
-  since GHC 3.00.  In particular
-
-<descrip>
-  <tag>@-fallow-overlapping-instances@</tag>
-	 allows overlapping instances
-  <tag>@-fallow-undecidable-instances@</tag>
-	 allows you to write instance contexts that constrain non-type-variables
-</descrip>
-
-Full details in Section <ref name="Multi-parameter type classes"
-id="multi-param-type-classes">.
-</itemize>
-
-<sect2>New Libraries
-<p>
-
-Documentation in <url name="GHC/Hugs Extension Libraries"
-url="libs.html">.
-
-<descrip>
-
-<tag>@Dynamic@</tag>
-
-Dynamic types.  
-
-<tag>@Exceptions@</tag>
-
-The library @Exception@ in @-syslib exts@ provide an interface for
-exception handling.  Calls to @error@, pattern matching failures and a
-bunch of other exception can be caught.
-
-</descrip>
-
-<sect2>Compiler internals
-<p>
-
-The intermediate language used by GHC has had a radical overhaul.
-The new Core language (coreSyn/CoreSyn.lhs) is much smaller and
-more uniform.  The main transformation engine (the "simplifier")
-has been totally rewritten.  The compiler is several thousand lines
-shorter as a result.  It's also very much easier to understand 
-and modify.  (It's true.  Honest!)
-
-
-<sect2>Run time system
-<p>
-
-There is a completely new runtime system, aimed at integration with
-Hugs.  Tons of cruft removed.  Some changes to code generation; things
-typically run a bit faster as a result.
-
-An overview of the new RTS is available: <url name="The New GHC/Hugs
-Runtime System" url="http://www.dcs.gla.ac.uk/~simonm/rts.ps">.
-
-<sect2>Storage Manager/Garbage Collector
-<p>
-
-The new storage manager features a dynamically resizing heap, so you
-won't need those pesky @-H@ options anymore.  In fact, the @-H@ option
-is now ignored for compatibility with older versions.
-
-Stacks are now also expandable, and the @-K@ option now specifies a
-<em/maximum/ heap size.  The default is (a perhaps conservative) @1M@.
-
-The garbage collector now collects CAFs, so there's no more space
-leaks associated with these.  If you think you have a CAF-related
-space leak, we'd like to hear about it.
-
-The storage manager current only has a two-space garbage collector,
-which will be slower than 3.02's generational collector when the
-amount of live data is large.  A new generational collector is high on
-our priority list.
-
-For the other new tweakables, see Section <ref name="RTS options to
-control the garbage-collector" id="rts-options-gc">.
-
-<sect2>Profiling
-<p>
-
-There is a new profiler based on <em/Cost Centre Stacks/.  This is an
-extension of the previous cost centre scheme, whereby the profilier
-stores information about the call-graph of the program and attributes
-costs to nodes of this graph.
-
-For a quick demo, try compiling a program with @-prof -auto-all@, then
-run it with @+RTS -p@ and see what comes out (in the @<prog>.prof@
-file).
-
-The feature is still experimental, and the call graph may not be
-exactly what you were expecting.  Also, we only have time/allocation
-profiling at the moment; heap profiling will follow shortly.
-
-<sect2>Miscellaneous
-<p>
-
-<itemize>
-
-<item> Concurrent Haskell is now the default.  No need to
-compile/download special libraries.  The context switch interval isn't
-tweakable any more; threads just yield after allocating a fixed amount
-of heap (currently 4k).  If you want a quicker context switch, that
-won't be possible: this decision was made for efficiency reasons (it
-reduces the penalty for runnning threaded code to almost zero).  We
-might allow the context switch interval to be increased in the future;
-but also context switches are pretty fast (faster than before).
-
-<item> @forkIO@ now returns a @ThreadId@, and there's a new operation
-@killThread@ which will terminate an existing thread.  See Section
-<ref name="The Concurrent interface" id="concurrent-interface"> for
-more details.
-
-<item> You need @-syslib concurrent@ to get the @Concurrent@ library.
-
-<item> The rewritten IO library from 3.03 has been ported to 4.00.
-
-<item> New constructs: @foriegn import@ and @foreign export@ for
-H/Direct.
-
-<item> Supported architectures: all the development has been done on
-x86(mainly FreeBSD/Linux) so this is the most stable environment.
-Sparc (Solaris) and x86/Win32 (cygwin32) have also been mildly tested, and
-an Alpha port is in the works.  Everything else will need a little
-porting effort; we don't have machines here, so any help would be
-greatly appreciated.
-
-<item> Code is faster and smaller, but programs might run slower due
-to the garbage collector (see "Storage Manager" above).  Increasing
-the minimum allocation area with the @-A@ RTS option can claw back
-some of this speed.
-
-<item> We now use GMP 2.02, and attempt to use an already-installed
-copy if available.  If you have GMP on your system but the configure
-script doesn't detect it, we'd like to know.
-
-<item> @seq@ works better than in 3.xx - you can now @seq@ functions
-without crashing the program.
-
-<item> The @Eval@ class has been removed (i.e. every type is assumed
-to be in class @Eval@).  This change has been made in anticipation of
-Haskell 98.
-
-<item> The native code generator has had very little testing (it's not used
-on x86 yet), so Sparcs may have some trouble with it.  Try -fvia-C if
-strange errors occur.
-
-<item> The compiler is slightly faster, but sometimes needs more heap.
-If you have an example where this is the case, please let us know.
-
-</itemize>
diff --git a/ghc/docs/users_guide/4-01-notes.vsgml b/ghc/docs/users_guide/4-01-notes.vsgml
deleted file mode 100644
index d0aaa7c..0000000
--- a/ghc/docs/users_guide/4-01-notes.vsgml
+++ /dev/null
@@ -1,31 +0,0 @@
-<sect1>Release notes for version~4.01---11/98
-<label id="release-4-01">
-<p>
-
-<itemize>
-
-<item> <tt/relocate_TSO/ bug fixed.
-
-<item> Weak pointers implemented, and new <tt/Weak/ library provided
-(see <htmlurl name="GHC/Hugs Extension Libraries" url="libs.html">).
-The <tt/ForeignObj/ interface no longer supports finalisation - use
-the <tt/Weak/ interface for that.
-
-<item> Foreign funcion interface is now complete and working.
-
-<item> New interface file format for compatibility with Hugs.  No
-user-visible changes except that you'll have to update any .hi-boot
-files you have lying around - check out some GHC-generated .hi files
-for examples.
-
-<item> Space leak in the compiler is partially fixed -
-<tt/-dcore-lint/ is still recommended for decent space behaviour.
-
-<item> New API to the RTS (not interesting unless you're an RTS client
-writer).
-
-<item> <tt/thawIOArray/ added to <tt/IOExts/.
-
-<item> Many many small bugs fixed.
-
-</itemize>
diff --git a/ghc/docs/users_guide/4-02-notes.vsgml b/ghc/docs/users_guide/4-02-notes.vsgml
deleted file mode 100644
index cda5219..0000000
--- a/ghc/docs/users_guide/4-02-notes.vsgml
+++ /dev/null
@@ -1,59 +0,0 @@
-<sect1>Release notes for version~4.02---12/98
-<label id="release-4-02">
-<p>
-
-<itemize>
-
-<item> Full Haskell 98 language support.
-
-<item> Scoped type variables implemented (see Section <ref
-name="Scoped Type Variables" id="scoped-type-variables">).
-
-<item> Several bugs in _ccall_GC and foreign export fixed.
-
-<item> Warnings for unused variables should work now (they didn't before).
-
-<item> Simplifier improvements:
-   <itemize>
-  	<item> Much better treatment of strict arguments.
-	<item> Function arguments of unlifted type are treated as strict.
-  	<item> Better treatment of bottoming Ids.
-  	<item> No need for worker/wrapper split for fns that are merely strict.
-  	<item> Fewer iterations needed, I hope.
-   </itemize>
-
-<item> Strictness of primitive operations is now explicit and used by
-the simplifier.
-
-<item> Less gratuitous renaming in interface files and abs C.
-
-<item> <tt/OccName/ is a separate module, and is an abstract data type.
- 
-<item> A new generational garbage collector: the number of generations
-is variable, using the -G RTS option (see <ref id="rts-options-gc"
-name="RTS options to control the garbage-collector">).  This collector
-is faster and more space-efficient than the two-space collector in 4.01.
-
-<item> Error messages and warnings are now printed out in the order they
-occur in the source code.
-
-<item> <tt/isEmptyMVar/ operation added to the <tt/Concurrent/ library.
-
-<item> Two new functions exported from <tt/ST/ (and <tt/LazyST/):
-<tt/unsafeIOToST/ and <tt/stToIO/.
-
-<item> The <tt/+RTS -H&lt;size&gt;/ option is reinstated.  Now it
-means "use about this much memory" (see Section <ref
-id="rts-options-gc" name="RTS options to control the garbage
-collector">).  This option was added mainly so that 4.02 GC times look
-good compared to 3.02 :-).
-
-<item> <tt/finalise/ and <tt/mkWeakNoFinaliser/ operations added to
-<tt/Weak/ library.
-
-<item> Ticky-ticky profiling works again (cost-centre profiling is
-still broken).
-
-<item> Better <tt/egcs-1.1.1/ support.
-
-</itemize>
diff --git a/ghc/docs/users_guide/4-03-notes.vsgml b/ghc/docs/users_guide/4-03-notes.vsgml
deleted file mode 100644
index a402be8..0000000
--- a/ghc/docs/users_guide/4-03-notes.vsgml
+++ /dev/null
@@ -1,26 +0,0 @@
-<sect1>Release notes for version~4.03---3/99
-<label id="release-4-03">
-<p>
-
-<itemize>
-<item> <tt/Weak/ library changes:
-	<itemize>
-	<item> Finalise is now spelt finalize in all function names.
-	<item> <tt/finalize/ now runs the finalizer immediately, and
-	       waits for it to complete before returning.
-	<item> <tt/mkWeak/ now takes a <tt/Maybe (IO ())/ for the finalizer,
-	       and <tt/mkWeakNoFinalizer/ is removed.
-	</itemize>
-
-<item> Changed representation of <tt/Integer/ type to speed up
-computations on small integers.  The performance of <tt/Integer/ is now
-only slightly slower than <tt/Int/ for values between <tt/minBound :: Int/
-and <tt/maxBound :: Int/.
-
-<item> On Win32 platforms, added support for using (and producing) dynamic
-link libraries (DLLs) containing ghc-compiled code.
-
-<item> Added @-funbox-strict-fields@ for unboxing/unpacking strict
-constructor fields.
-
-</itemize>
diff --git a/ghc/docs/users_guide/4-04-notes.vsgml b/ghc/docs/users_guide/4-04-notes.vsgml
deleted file mode 100644
index c7d307f..0000000
--- a/ghc/docs/users_guide/4-04-notes.vsgml
+++ /dev/null
@@ -1,94 +0,0 @@
-<sect1>Release notes for version~4.04---7/99
-<label id="release-4-04">
-<p>
-
-<itemize>
-<item> <tt/Weak/ library changes:
-	<itemize>
-	<item> Finalise is now spelt finalize in all function names.
-	<item> <tt/finalize/ now runs the finalizer immediately, and
-	       waits for it to complete before returning.
-	<item> <tt/mkWeak/ now takes a <tt/Maybe (IO ())/ for the finalizer,
-	       and <tt/mkWeakNoFinalizer/ is removed.
-	<item> A weak pointer whose key is itself a weak pointer will now do
-	 	the right thing.
-	</itemize>
-
-<item> Changed representation of <tt/Integer/ type to speed up
-computations on small integers.  The performance of <tt/Integer/ is now
-only slightly slower than <tt/Int/ for values between <tt/minBound::Int/
-and <tt/maxBound::Int/.
-
-<item> On Win32 platforms, added support for using (and producing) dynamic
-link libraries (DLLs) containing ghc-compiled code.
-
-<item> Added @-funbox-strict-fields@ for unboxing/unpacking strict
-constructor fields.
-
-<item> GHC now has a license!  Check out <tt>fptools/ghc/LICENSE/</tt>.
-
-<item> Added CPR analysis, which reduces allocation by unboxing
-function results (thanks to Kevin Glynn <tt>&lt;keving@@cs.mu.OZ.AU&gt;</tt>).
-
-<item> UsageSP analysis added, but not yet functional.
-
-<item> Added a simple common sub-expression analysis pass.
-
-<item> Implemented update-in-place for certain very restricted cases.
-
-<item> Replaced GHC's old and worn yacc/lex parser with a new one
-based on Happy.  Fixed several Haskell 98 non-conformance issues in
-the process.
-
-<item> Added <tt>Concurrent.yield :: IO ()</tt>.
-
-<item> Added RULES pragms - transformation rules for Haskell source.
-This is used for list fusion: now intermediate lists between map,
-foldr, list comprehensions are removed automatically.
-
-<item> Unregisterised/unmangled builds now work.
-
-<item> Much performance tuning: GHC 4.04 produces faster code than all
-previous compilers.
-
-<item> GHC now defines <tt/__HASKELL98__/ when compiling files with
-<tt/-cpp/.
-
-<item> <tt/hppa1.1-hp-hpux/ port reinstated.
-
-<item> New operations for unsafely thawing byte arrays:
-<tt/unsafeThaw{Byte,ST,IO}Array/.
-
-<item> <tt/mkdependHS/ now lives in GHC's lib directory, not the
-binary directory.  It isn't intended to be run standalone, only via
-<tt/ghc -M/.
-
-<item> Asynchronous exceptions are now supported (see Section <ref name="The Concurrent Library" id="concurrent-interface">).  New operations:
-
-  <itemize> <item> <tt/Exception.killThread/ now raises an exception 
-	(<tt/AsyncException.KilledThread/) in the killed thread.
-       <item> <tt/Exception.raiseInThread/ allows a thread to raise an
-	exception in another thread.
-       <item> <tt/Concurrent.myThreadId/ returns the <tt/ThreadId/ of the 
-	calling thread.
-       <item> Stack overflow results in <tt/AsyncException.StackOverflow/
-	being raised in the offending thread.
-  </itemize>
-
-<item> Assertion failures now raise an <tt/AssertionFailed/ exception.
-
-<item> Added simple high-level interface to the Regex library, see
-Section <ref name="The RegexString Library" id="RegexString">.
-
-<item> <tt/forkIO/ now handles any uncaught exceptions cleanly.
-
-<item> <tt/integer2Int#/ isn't sign preserving any longer, but modulo
-<tt/(maxBound::Int + 1) * 2/.
-
-<item> <tt/-ddump-rdr/ is now called <tt/-ddump-parsed/.
-
-<item> Signal handling with the <tt/Posix/ library now works.
-
-<item> Many, many bugs fixed.
-
-</itemize>
diff --git a/ghc/docs/users_guide/debugging.vsgml b/ghc/docs/users_guide/debugging.vsgml
deleted file mode 100644
index f3fed15..0000000
--- a/ghc/docs/users_guide/debugging.vsgml
+++ /dev/null
@@ -1,337 +0,0 @@
-%************************************************************************
-%*                                                                      *
-<sect1>Debugging the compiler
-<label id="options-debugging">
-<p>
-<nidx>debugging options (for GHC)</nidx>
-%*                                                                      *
-%************************************************************************
-
-HACKER TERRITORY. HACKER TERRITORY.
-(You were warned.)
-
-%----------------------------------------------------------------------
-<sect2>Replacing the program for one or more phases.
-<label id="replacing-phases">
-<p>
-<nidx>GHC phases, changing</nidx>
-<nidx>phases, changing GHC</nidx>
-
-You may specify that a different program be used for one of the phases
-of the compilation system, in place of whatever the driver @ghc@ has
-wired into it.  For example, you might want to try a different
-assembler.  The
-@-pgm<phase-code><program-name>@<nidx>-pgm&lt;phase&gt;&lt;stuff&gt;
-option</nidx> option to @ghc@ will cause it to use @<program-name>@
-for phase @<phase-code>@, where the codes to indicate the phases are:
-
-<tabular ca="ll">
-<bf>code</bf> | <bf>phase</bf> @@
-@@
-L    | literate pre-processor @@
-P    | C pre-processor (if -cpp only) @@
-C    | Haskell compiler @@
-c    | C compiler@@
-a    | assembler @@
-l    | linker @@
-dep  | Makefile dependency generator @@
-</tabular>
-
-%----------------------------------------------------------------------
-<sect2>Forcing options to a particular phase.
-<label id="forcing-options-through">
-<p>
-<nidx>forcing GHC-phase options</nidx>
-
-The preceding sections describe driver options that are mostly
-applicable to one particular phase.  You may also <em>force</em> a
-specific option @<option>@ to be passed to a particular phase
-@<phase-code>@ by feeding the driver the option
-@-opt<phase-code><option>@.<nidx>-opt&lt;phase&gt;&lt;stuff&gt;
-option</nidx> The codes to indicate the phases are the same as in the
-previous section.
-
-So, for example, to force an @-Ewurble@ option to the assembler, you
-would tell the driver @-opta-Ewurble@ (the dash before the E is
-required).
-
-Besides getting options to the Haskell compiler with @-optC<blah>@,
-you can get options through to its runtime system with
-@-optCrts<blah>@<nidx>-optCrts&lt;blah&gt; option</nidx>.
-
-So, for example: when I want to use my normal driver but with my
-profiled compiler binary, I use this script:
-<tscreen><verb>
-#! /bin/sh
-exec /local/grasp_tmp3/simonpj/ghc-BUILDS/working-alpha/ghc/driver/ghc \
-     -pgmC/local/grasp_tmp3/simonpj/ghc-BUILDS/working-hsc-prof/hsc \
-     -optCrts-i0.5 \
-     -optCrts-PT \
-     "$@"
-</verb></tscreen>
-
-%----------------------------------------------------------------------
-<sect2>Dumping out compiler intermediate structures
-<label id="dumping-output">
-<p>
-<nidx>dumping GHC intermediates</nidx>
-<nidx>intermediate passes, output</nidx>
-
-<descrip>
-<tag>@-noC@:</tag>
-<nidx>-noC option</nidx>
-Don't bother generating C output <em>or</em> an interface file.  Usually
-used in conjunction with one or more of the @-ddump-*@ options; for
-example: @ghc -noC -ddump-simpl Foo.hs@
-
-<tag>@-hi@:</tag>
-<nidx>-hi option</nidx>
-<em>Do</em> generate an interface file.  This would normally be used in
-conjunction with @-noC@, which turns off interface generation;
-thus: @-noC -hi@.
-
-<tag>@-dshow-passes@:</tag>
-<nidx>-dshow-passes option</nidx>
-Prints a message to stderr as each pass starts.  Gives a warm but
-undoubtedly misleading feeling that GHC is telling you what's
-happening.
-
-<tag>@-ddump-<pass>@:</tag>
-<nidx>-ddump-&lt;pass&gt; options</nidx>
-Make a debugging dump after pass @<pass>@ (may be common enough to
-need a short form...).  You can get all of these at once (<em/lots/ of
-output) by using @-ddump-all@, or most of them with @-ddump-most@.
-Some of the most useful ones are:
-
-<descrip>
-<tag>@-ddump-parsed@:</tag> parser output
-<tag>@-ddump-rn@:</tag>  renamer output
-<tag>@-ddump-tc@:</tag>  typechecker output
-<tag>@-ddump-deriv@:</tag>  derived instances
-<tag>@-ddump-ds@:</tag>  desugarer output
-<tag>@-ddump-spec@:</tag>  output of specialisation pass
-<tag>@-ddump-rules@:</tag>  dumps all rewrite rules (including those generated by the specialisation pass)
-<tag>@-ddump-simpl@:</tag>  simplifer output (Core-to-Core passes)
-<tag>@-ddump-usagesp@:</tag> UsageSP inference pre-inf and output
-<tag>@-ddump-cpranal@:</tag>  CPR analyser output
-<tag>@-ddump-stranal@:</tag>  strictness analyser output
-<tag>@-ddump-workwrap@:</tag>  worker/wrapper split output
-<tag>@-ddump-occur-anal@:</tag>  `occurrence analysis' output
-<tag>@-ddump-stg@:</tag>  output of STG-to-STG passes
-<tag>@-ddump-absC@:</tag>  <em>un</em>flattened Abstract~C
-<tag>@-ddump-flatC@:</tag>  <em>flattened</em> Abstract~C
-<tag>@-ddump-realC@:</tag>  same as what goes to the C compiler
-<tag>@-ddump-asm@:</tag>  assembly language from the native-code generator
-<tag>@-ddump-most@:</tag> most of the above, plus @-dshow-passes@, @-dsource-stats@, @-ddump-simpl-stats@,
-<tag>@-ddump-all@:</tag> all the above, plus @-ddump-inlinings@, 
-@-ddump-simpl-iterations@, @-ddump-rn-trace@,
-@-ddump-verbose-simpl@, @-ddump-verbose-stg@.
-</descrip>
-
-<nidx>-ddump-all option</nidx>%
-<nidx>-ddump-most option</nidx>%
-<nidx>-ddump-parsed option</nidx>%
-<nidx>-ddump-rn option</nidx>%
-<nidx>-ddump-tc option</nidx>%
-<nidx>-ddump-deriv option</nidx>%
-<nidx>-ddump-ds option</nidx>%
-<nidx>-ddump-simpl option</nidx>%
-<nidx>-ddump-cpranal option</nidx>%
-<nidx>-ddump-workwrap option</nidx>%
-<nidx>-ddump-rules option</nidx>%
-<nidx>-ddump-usagesp option</nidx>%
-<nidx>-ddump-stranal option</nidx>%
-<nidx>-ddump-occur-anal option</nidx>%
-<nidx>-ddump-spec option</nidx>%
-<nidx>-ddump-stg option</nidx>%
-<nidx>-ddump-absC option</nidx>%
-<nidx>-ddump-flatC option</nidx>%
-<nidx>-ddump-realC option</nidx>%
-<nidx>-ddump-asm option</nidx>
-
-%For any other @-ddump-*@ options: consult the source, notably
-%@ghc/compiler/main/CmdLineOpts.lhs@.
-
-<tag>@-dverbose-simpl@ and @-dverbose-stg@:</tag>
-<nidx>-dverbose-simpl option</nidx>
-<nidx>-dverbose-stg option</nidx>
-Show the output of the intermediate Core-to-Core and STG-to-STG
-passes, respectively.  (<em>Lots</em> of output!) So: when we're 
-really desperate:
-<tscreen><verb>
-% ghc -noC -O -ddump-simpl -dverbose-simpl -dcore-lint Foo.hs
-</verb></tscreen>
-
-<tag>@-ddump-simpl-iterations@:</tag>
-<nidx>-ddump-simpl-iterations option</nidx>
-Show the output of each <em/iteration/ of the simplifier (each run of
-the simplifier has a maximum number of iterations, normally 4).  Used
-when even @-dverbose-simpl@ doesn't cut it.
-
-<tag>@-dppr-{user,debug@}:</tag>
-<nidx>-dppr-user option</nidx>
-<nidx>-dppr-debug option</nidx>
-Debugging output is in one of several ``styles.''  Take the printing
-of types, for example.  In the ``user'' style, the compiler's internal
-ideas about types are presented in Haskell source-level syntax,
-insofar as possible.  In the ``debug'' style (which is the default for
-debugging output), the types are printed in with
-explicit foralls, and variables have their unique-id attached (so you
-can check for things that look the same but aren't).
-
-<tag>@-ddump-simpl-stats@:</tag>
-<nidx>-ddump-simpl-stats option</nidx>
-Dump statistics about how many of each kind
-of transformation too place.  If you add @-dppr-debug@ you get more detailed information.
-
-<tag>@-ddump-raw-asm@:</tag>
-<nidx>-ddump-raw-asm option</nidx>
-Dump out the assembly-language stuff, before the ``mangler'' gets it.
-
-<tag>@-ddump-rn-trace@:</tag>
-<nidx>-ddump-rn-trace</nidx>
-Make the renamer be *real* chatty about what it is upto.
-
-<tag>@-dshow-rn-stats@:</tag>
-<nidx>-dshow-rn-stats</nidx>
-Print out summary of what kind of information the renamer had to bring
-in.
-<tag>@-dshow-unused-imports@:</tag>
-<nidx>-dshow-unused-imports</nidx>
-Have the renamer report what imports does not contribute.
-
-%
-%<tag>@-dgc-debug@:</tag>
-%<nidx>-dgc-debug option</nidx>
-%Enables some debugging code related to the garbage-collector.
-</descrip>
-
-%ToDo: -ddump-asm-insn-counts
-%-ddump-asm-globals-info
-
-%----------------------------------------------------------------------
-<sect2>Checking for consistency
-<label id="checking-consistency">
-<p>
-<nidx>consistency checks</nidx>
-<nidx>lint</nidx>
-
-<descrip>
-<tag>@-dcore-lint@:</tag>
-<nidx>-dcore-lint option</nidx>
-Turn on heavyweight intra-pass sanity-checking within GHC, at Core
-level.  (It checks GHC's sanity, not yours.)
-
-<tag>@-dstg-lint@:</tag>
-<nidx>-dstg-lint option</nidx>
-Ditto for STG level.
-
-<tag>@-dusagesp-lint@:</tag>
-<nidx>-dstg-lint option</nidx>
-Turn on checks around UsageSP inference (@-fusagesp@).  This verifies
-various simple properties of the results of the inference, and also
-warns if any identifier with a used-once annotation before the
-inference has a used-many annotation afterwards; this could indicate a
-non-worksafe transformation is being applied.
-</descrip>
-
-%----------------------------------------------------------------------
-<sect2>How to read Core syntax (from some @-ddump-*@ flags)
-<p>
-<nidx>reading Core syntax</nidx>
-<nidx>Core syntax, how to read</nidx>
-
-Let's do this by commenting an example.  It's from doing
-@-ddump-ds@ on this code:
-<tscreen><verb>
-skip2 m = m : skip2 (m+2)
-</verb></tscreen>
-
-Before we jump in, a word about names of things.  Within GHC,
-variables, type constructors, etc., are identified by their
-``Uniques.''  These are of the form `letter' plus `number' (both
-loosely interpreted).  The `letter' gives some idea of where the
-Unique came from; e.g., @_@ means ``built-in type variable'';
-@t@ means ``from the typechecker''; @s@ means ``from the
-simplifier''; and so on.  The `number' is printed fairly compactly in
-a `base-62' format, which everyone hates except me (WDP).
-
-Remember, everything has a ``Unique'' and it is usually printed out
-when debugging, in some form or another.  So here we go...
-
-<tscreen><verb>
-Desugared:
-Main.skip2{-r1L6-} :: _forall_ a$_4 =>{{Num a$_4}} -> a$_4 -> [a$_4]
-
---# `r1L6' is the Unique for Main.skip2;
---# `_4' is the Unique for the type-variable (template) `a'
---# `{{Num a$_4}}' is a dictionary argument
-
-_NI_
-
---# `_NI_' means "no (pragmatic) information" yet; it will later
---# evolve into the GHC_PRAGMA info that goes into interface files.
-
-Main.skip2{-r1L6-} =
-    /\ _4 -> \ d.Num.t4Gt ->
-	let {
-	  {- CoRec -}
-	  +.t4Hg :: _4 -> _4 -> _4
-	  _NI_
-	  +.t4Hg = (+{-r3JH-} _4) d.Num.t4Gt
-
-	  fromInt.t4GS :: Int{-2i-} -> _4
-	  _NI_
-	  fromInt.t4GS = (fromInt{-r3JX-} _4) d.Num.t4Gt
-
---# The `+' class method (Unique: r3JH) selects the addition code
---# from a `Num' dictionary (now an explicit lamba'd argument).
---# Because Core is 2nd-order lambda-calculus, type applications
---# and lambdas (/\) are explicit.  So `+' is first applied to a
---# type (`_4'), then to a dictionary, yielding the actual addition
---# function that we will use subsequently...
-
---# We play the exact same game with the (non-standard) class method
---# `fromInt'.  Unsurprisingly, the type `Int' is wired into the
---# compiler.
-
-	  lit.t4Hb :: _4
-	  _NI_
-	  lit.t4Hb =
-	      let {
-		ds.d4Qz :: Int{-2i-}
-		_NI_
-		ds.d4Qz = I#! 2#
-	      } in  fromInt.t4GS ds.d4Qz
-
---# `I# 2#' is just the literal Int `2'; it reflects the fact that
---# GHC defines `data Int = I# Int#', where Int# is the primitive
---# unboxed type.  (see relevant info about unboxed types elsewhere...)
-
---# The `!' after `I#' indicates that this is a *saturated*
---# application of the `I#' data constructor (i.e., not partially
---# applied).
-
-	  skip2.t3Ja :: _4 -> [_4]
-	  _NI_
-	  skip2.t3Ja =
-	      \ m.r1H4 ->
-		  let { ds.d4QQ :: [_4]
-			_NI_
-			ds.d4QQ =
-		    let {
-		      ds.d4QY :: _4
-		      _NI_
-		      ds.d4QY = +.t4Hg m.r1H4 lit.t4Hb
-		    } in  skip2.t3Ja ds.d4QY
-		  } in
-		  :! _4 m.r1H4 ds.d4QQ
-
-	  {- end CoRec -}
-	} in  skip2.t3Ja
-</verb></tscreen>
-
-(``It's just a simple functional language'' is an unregisterised
-trademark of Peyton Jones Enterprises, plc.)
-
-%----------------------------------------------------------------------
diff --git a/ghc/docs/users_guide/end.vsgml b/ghc/docs/users_guide/end.vsgml
deleted file mode 100644
index ef51cdc..0000000
--- a/ghc/docs/users_guide/end.vsgml
+++ /dev/null
@@ -1,3 +0,0 @@
-% document trailer for user guide.
-
-</article>
diff --git a/ghc/docs/users_guide/glasgow_exts.vsgml b/ghc/docs/users_guide/glasgow_exts.vsgml
deleted file mode 100644
index b29df62..0000000
--- a/ghc/docs/users_guide/glasgow_exts.vsgml
+++ /dev/null
@@ -1,2679 +0,0 @@
-% 
-% $Id: glasgow_exts.vsgml,v 1.20 1999/11/25 10:28:41 simonpj Exp $
-%
-% GHC Language Extensions.
-%
-
-As with all known Haskell systems, GHC implements some extensions to
-the language.  To use them, you'll need to give a @-fglasgow-exts@%
-<nidx>-fglasgow-exts option</nidx> option.
-
-Virtually all of the Glasgow extensions serve to give you access to
-the underlying facilities with which we implement Haskell.  Thus, you
-can get at the Raw Iron, if you are willing to write some non-standard
-code at a more primitive level.  You need not be ``stuck'' on
-performance because of the implementation costs of Haskell's
-``high-level'' features---you can always code ``under'' them.  In an
-extreme case, you can write all your time-critical code in C, and then
-just glue it together with Haskell!
-
-Executive summary of our extensions:
-
-<descrip>
-
-<tag>Unboxed types and primitive operations:</tag> 
-
-You can get right down to the raw machine types and operations;
-included in this are ``primitive arrays'' (direct access to Big Wads
-of Bytes).  Please see Section <ref name="Unboxed types"
-id="glasgow-unboxed"> and following.
-
-<tag>Multi-parameter type classes:</tag>
-
-GHC's type system supports extended type classes with multiple
-parameters.  Please see Section <ref name="Mult-parameter type
-classes" id="multi-param-type-classes">.
-
-<tag>Local universal quantification:</tag>
-
-GHC's type system supports explicit universal quantification in
-constructor fields and function arguments.  This is useful for things
-like defining @runST@ from the state-thread world.  See Section <ref
-name="Local universal quantification" id="universal-quantification">.
-
-<tag>Extistentially quantification in data types:</tag>
-
-Some or all of the type variables in a datatype declaration may be
-<em>existentially quantified</em>.  More details in Section <ref
-name="Existential Quantification" id="existential-quantification">.
-
-<tag>Scoped type variables:</tag>
-
-Scoped type variables enable the programmer to supply type signatures
-for some nested declarations, where this would not be legal in Haskell
-98.  Details in Section <ref name="Scoped Type Variables"
-id="scoped-type-variables">.
-
-<tag>Calling out to C:</tag> 
-
-Just what it sounds like.  We provide <em>lots</em> of rope that you
-can dangle around your neck.  Please see Section <ref name="Calling~C
-directly from Haskell" id="glasgow-ccalls">.
-
-<tag>Pragmas</tag>
-
-Pragmas are special instructions to the compiler placed in the source
-file.  The pragmas GHC supports are described in Section <ref
-name="Pragmas" id="pragmas">.
-
-<tag>Rewrite rules:</tag>
-
-The programmer can specify rewrite rules as part of the source program
-(in a pragma).  GHC applies these rewrite rules wherever it can.
-Details in Section <ref name="Rewrite Rules"
-id="rewrite-rules">.
-
-<tag>Pattern guards</tag>
-
-add a more flexible syntax and semantics for guards in function definitions.
-This gives expressiveness somewhat comparable to that of ``views''.
-</descrip>
-
-Before you get too carried away working at the lowest level (e.g.,
-sloshing @MutableByteArray#@s around your program), you may wish to
-check if there are system libraries that provide a ``Haskellised
-veneer'' over the features you want.  See Section <ref name="GHC
-Prelude and libraries" id="ghc-prelude">.
-
-%************************************************************************
-%*                                                                      *
-<sect1>Unboxed types
-<label id="glasgow-unboxed">
-<p>
-<nidx>Unboxed types (Glasgow extension)</nidx>
-%*                                                                      *
-%************************************************************************
-
-These types correspond to the ``raw machine'' types you would use in
-C: @Int#@ (long int), @Double#@ (double), @Addr#@ (void *), etc.  The
-<em>primitive operations</em> (PrimOps) on these types are what you
-might expect; e.g., @(+#)@ is addition on @Int#@s, and is the
-machine-addition that we all know and love---usually one instruction.
-
-There are some restrictions on the use of unboxed types, the main one
-being that you can't pass an unboxed value to a polymorphic function
-or store one in a polymorphic data type.  This rules out things like
-@[Int#]@ (ie. lists of unboxed integers).  The reason for this
-restriction is that polymorphic arguments and constructor fields are
-assumed to be pointers: if an unboxed integer is stored in one of
-these, the garbage collector would attempt to follow it, leading to
-unpredictable space leaks.  Or a @seq@ operation on the polymorphic
-component may attempt to dereference the pointer, with disastrous
-results.  Even worse, the unboxed value might be larger than a pointer
-(@Double#@ for instance).
-
-Nevertheless, A numerically-intensive program using unboxed types can
-go a <em>lot</em> faster than its ``standard'' counterpart---we saw a
-threefold speedup on one example.
-
-Please see Section <ref name="The module PrelGHC: really primitive
-stuff" id="ghc-libs-ghc"> for the details of unboxed types and the
-operations on them.
-
-%************************************************************************
-%*                                                                      *
-<sect1>Primitive state-transformer monad
-<label id="glasgow-ST-monad">
-<p>
-<nidx>state transformers (Glasgow extensions)</nidx>
-<nidx>ST monad (Glasgow extension)</nidx>
-%*                                                                      *
-%************************************************************************
-
-This monad underlies our implementation of arrays, mutable and
-immutable, and our implementation of I/O, including ``C calls''.
-
-The @ST@ library, which provides access to the @ST@ monad, is a
-GHC/Hugs extension library and is described in the separate <htmlurl
-name="GHC/Hugs Extension Libraries" url="libs.html"> document.
-
-%************************************************************************
-%*                                                                      *
-<sect1>Primitive arrays, mutable and otherwise
-<label id="glasgow-prim-arrays">
-<p>
-<nidx>primitive arrays (Glasgow extension)</nidx>
-<nidx>arrays, primitive (Glasgow extension)</nidx>
-%*                                                                      *
-%************************************************************************
-
-GHC knows about quite a few flavours of Large Swathes of Bytes.
-
-First, GHC distinguishes between primitive arrays of (boxed) Haskell
-objects (type @Array# obj@) and primitive arrays of bytes (type
-@ByteArray#@).
-
-Second, it distinguishes between...
-<descrip>
-<tag>Immutable:</tag>
-Arrays that do not change (as with ``standard'' Haskell arrays); you
-can only read from them.  Obviously, they do not need the care and
-attention of the state-transformer monad.
-
-<tag>Mutable:</tag>
-Arrays that may be changed or ``mutated.''  All the operations on them
-live within the state-transformer monad and the updates happen
-<em>in-place</em>.
-
-<tag>``Static'' (in C land):</tag>
-A C routine may pass an @Addr#@ pointer back into Haskell land.  There
-are then primitive operations with which you may merrily grab values
-over in C land, by indexing off the ``static'' pointer.
-
-<tag>``Stable'' pointers:</tag>
-If, for some reason, you wish to hand a Haskell pointer (i.e.,
-<em>not</em> an unboxed value) to a C routine, you first make the
-pointer ``stable,'' so that the garbage collector won't forget that it
-exists.  That is, GHC provides a safe way to pass Haskell pointers to
-C.
-
-Please see Section <ref name="Subverting automatic unboxing with
-``stable pointers''" id="glasgow-stablePtrs"> for more details.
-
-<tag>``Foreign objects'':</tag>
-A ``foreign object'' is a safe way to pass an external object (a
-C-allocated pointer, say) to Haskell and have Haskell do the Right
-Thing when it no longer references the object.  So, for example, C
-could pass a large bitmap over to Haskell and say ``please free this
-memory when you're done with it.'' 
-
-Please see Section <ref name="Pointing outside the Haskell heap"
-id="glasgow-foreignObjs"> for more details.
-
-</descrip>
-
-The libraries section gives more details on all these ``primitive
-array'' types and the operations on them, Section <ref name="The GHC
-Prelude and Libraries" id="ghc-prelude">.  Some of these extensions
-are also supported by Hugs, and the supporting libraries are described
-in the <htmlurl name="GHC/Hugs Extension Libraries" url="libs.html">
-document.
-
-%************************************************************************
-%*                                                                      *
-<sect1>Calling~C directly from Haskell
-<label id="glasgow-ccalls">
-<p>
-<nidx>C calls (Glasgow extension)</nidx>
-<nidx>_ccall_ (Glasgow extension)</nidx>
-<nidx>_casm_ (Glasgow extension)</nidx>
-%*                                                                      *
-%************************************************************************
-
-GOOD ADVICE: Because this stuff is not Entirely Stable as far as names
-and things go, you would be well-advised to keep your C-callery
-corraled in a few modules, rather than sprinkled all over your code.
-It will then be quite easy to update later on.
-
-%************************************************************************
-%*                                                                      *
-<sect2>@_ccall_@ and @_casm_@: an introduction
-<label id="ccall-intro">
-<p>
-%*                                                                      *
-%************************************************************************
-
-The simplest way to use a simple C function
-
-<tscreen><verb>
-double fooC( FILE *in, char c, int i, double d, unsigned int u )
-</verb></tscreen>
-
-is to provide a Haskell wrapper:
-
-<tscreen><verb>
-fooH :: Char -> Int -> Double -> Word -> IO Double
-fooH c i d w = _ccall_ fooC (``stdin''::Addr) c i d w
-</verb></tscreen>
-
-The function @fooH@ will unbox all of its arguments, call the C
-function @fooC@ and box the corresponding arguments.
-
-One of the annoyances about @_ccall_@s is when the C types don't quite
-match the Haskell compiler's ideas.  For this, the @_casm_@ variant
-may be just the ticket (NB: <em>no chance</em> of such code going
-through a native-code generator):
-
-<tscreen><verb>
-import Addr
-import CString
-
-oldGetEnv name
-  = _casm_ ``%r = getenv((char *) %0);'' name >>= \ litstring ->
-    return (
-        if (litstring == nullAddr) then
-            Left ("Fail:oldGetEnv:"++name)
-        else
-            Right (unpackCString litstring)
-    )
-</verb></tscreen>
-
-The first literal-literal argument to a @_casm_@ is like a @printf@
-format: @%r@ is replaced with the ``result,'' @%0@--@%n-1@ are
-replaced with the 1st--nth arguments.  As you can see above, it is an
-easy way to do simple C~casting.  Everything said about @_ccall_@ goes
-for @_casm_@ as well.
-
-The use of @_casm_@ in your code does pose a problem to the compiler
-when it comes to generating an interface file for a freshly compiled
-module. Included in an interface file is the unfolding (if any) of a
-declaration. However, if a declaration's unfolding happens to contain
-a @_casm_@, its unfolding will <em/not/ be emitted into the interface
-file even if it qualifies by all the other criteria. The reason why
-the compiler prevents this from happening is that unfolding @_casm_@s
-into an interface file unduly constrains how code that import your
-module have to be compiled. If an imported declaration is unfolded and
-it contains a @_casm_@, you now have to be using a compiler backend
-capable of dealing with it (i.e., the C compiler backend). If you are
-using the C compiler backend, the unfolded @_casm_@ may still cause you
-problems since the C code snippet it contains may mention CPP symbols
-that were in scope when compiling the original module are not when
-compiling the importing module.
-
-If you're willing to put up with the drawbacks of doing cross-module
-inlining of C code (GHC - A Better C Compiler :-), the option
-@-funfold-casms-in-hi-file@ will turn off the default behaviour.
-<nidx>-funfold-casms-in-hi-file option</nidx>
-
-%************************************************************************
-%*                                                                      *
-<sect2>Literal-literals
-<label id="glasgow-literal-literals">
-<p>
-<nidx>Literal-literals</nidx>
-%*                                                                      *
-%************************************************************************
-
-The literal-literal argument to @_casm_@ can be made use of separately
-from the @_casm_@ construct itself. Indeed, we've already used it:
-
-<tscreen><verb>
-fooH :: Char -> Int -> Double -> Word -> IO Double
-fooH c i d w = _ccall_ fooC (``stdin''::Addr) c i d w
-</verb></tscreen>
-
-The first argument that's passed to @fooC@ is given as a literal-literal, 
-that is, a literal chunk of C code that will be inserted into the generated
-@.hc@ code at the right place.
-
-A literal-literal is restricted to having a type that's an instance of
-the @CCallable@ class, see <ref name="CCallable" id="ccall-gotchas">
-for more information.
-
-Notice that literal-literals are by their very nature unfriendly to
-native code generators, so exercise judgement about whether or not to
-make use of them in your code.
-
-%************************************************************************
-%*                                                                      *
-<sect2>Using function headers
-<label id="glasgow-foreign-headers">
-<p>
-<nidx>C calls, function headers</nidx>
-%*                                                                      *
-%************************************************************************
-
-When generating C (using the @-fvia-C@ directive), one can assist the
-C compiler in detecting type errors by using the @-#include@ directive
-to provide @.h@ files containing function headers.
-
-For example,
-
-<tscreen><verb>
-typedef unsigned long *StgForeignObj;
-typedef long StgInt;
-
-void          initialiseEFS (StgInt size);
-StgInt        terminateEFS (void);
-StgForeignObj emptyEFS(void);
-StgForeignObj updateEFS (StgForeignObj a, StgInt i, StgInt x);
-StgInt        lookupEFS (StgForeignObj a, StgInt i);
-</verb></tscreen>
-
-You can find appropriate definitions for @StgInt@, @StgForeignObj@,
-etc using @gcc@ on your architecture by consulting
-@ghc/includes/StgTypes.h@.  The following table summarises the
-relationship between Haskell types and C types.
-
-<tabular ca="ll">
-<bf>C type name</bf>      | <bf>Haskell Type</bf> @@
-@@
-@StgChar@          | @Char#@ @@               
-@StgInt@           | @Int#@ @@                
-@StgWord@          | @Word#@ @@               
-@StgAddr@          | @Addr#@ @@               
-@StgFloat@         | @Float#@ @@              
-@StgDouble@        | @Double#@ @@             
-
-@StgArray@         | @Array#@ @@              
-@StgByteArray@     | @ByteArray#@ @@          
-@StgArray@         | @MutableArray#@ @@       
-@StgByteArray@     | @MutableByteArray#@ @@   
-
-@StgStablePtr@     | @StablePtr#@ @@
-@StgForeignObj@    | @ForeignObj#@
-</tabular>
-
-Note that this approach is only <em>essential</em> for returning
-@float@s (or if @sizeof(int) != sizeof(int *)@ on your
-architecture) but is a Good Thing for anyone who cares about writing
-solid code.  You're crazy not to do it.
-
-%************************************************************************
-%*                                                                      *
-<sect2>Subverting automatic unboxing with ``stable pointers''
-<label id="glasgow-stablePtrs">
-<p>
-<nidx>stable pointers (Glasgow extension)</nidx>
-%*                                                                      *
-%************************************************************************
-
-The arguments of a @_ccall_@ are automatically unboxed before the
-call.  There are two reasons why this is usually the Right Thing to
-do:
-
-<itemize>
-<item>
-C is a strict language: it would be excessively tedious to pass
-unevaluated arguments and require the C programmer to force their
-evaluation before using them.
-
-<item> Boxed values are stored on the Haskell heap and may be moved
-within the heap if a garbage collection occurs---that is, pointers
-to boxed objects are not <em>stable</em>.
-</itemize>
-
-It is possible to subvert the unboxing process by creating a ``stable
-pointer'' to a value and passing the stable pointer instead.  For
-example, to pass/return an integer lazily to C functions @storeC@ and
-@fetchC@, one might write:
-
-<tscreen><verb>
-storeH :: Int -> IO ()
-storeH x = makeStablePtr x              >>= \ stable_x ->
-           _ccall_ storeC stable_x
-
-fetchH :: IO Int
-fetchH x = _ccall_ fetchC               >>= \ stable_x ->
-           deRefStablePtr stable_x      >>= \ x ->
-           freeStablePtr stable_x       >>
-           return x
-</verb></tscreen>
-
-The garbage collector will refrain from throwing a stable pointer away
-until you explicitly call one of the following from C or Haskell.
-
-<tscreen><verb>
-void freeStablePointer( StgStablePtr stablePtrToToss )
-freeStablePtr :: StablePtr a -> IO ()
-</verb></tscreen>
-
-As with the use of @free@ in C programs, GREAT CARE SHOULD BE
-EXERCISED to ensure these functions are called at the right time: too
-early and you get dangling references (and, if you're lucky, an error
-message from the runtime system); too late and you get space leaks.
-
-And to force evaluation of the argument within @fooC@, one would
-call one of the following C functions (according to type of argument).
-
-<tscreen><verb>
-void     performIO  ( StgStablePtr stableIndex /* StablePtr s (IO ()) */ );
-StgInt   enterInt   ( StgStablePtr stableIndex /* StablePtr s Int */ );
-StgFloat enterFloat ( StgStablePtr stableIndex /* StablePtr s Float */ );
-</verb></tscreen>
-
-<nidx>performIO</nidx>
-<nidx>enterInt</nidx>
-<nidx>enterFloat</nidx>
-
-Note Bene: @_ccall_GC_@<nidx>_ccall_GC_</nidx> must be used if any of
-these functions are used.
-
-%************************************************************************
-%*                                                                      *
-<sect2>Foreign objects: pointing outside the Haskell heap
-<label id="glasgow-foreignObjs">
-<p>
-<nidx>foreign objects (Glasgow extension)</nidx>
-%*                                                                      *
-%************************************************************************
-
-There are two types that @ghc@ programs can use to reference
-(heap-allocated) objects outside the Haskell world: @Addr@ and
-@ForeignObj@.
-
-If you use @Addr@, it is up to you to the programmer to arrange
-allocation and deallocation of the objects.
-
-If you use @ForeignObj@, @ghc@'s garbage collector will call upon the
-user-supplied <em>finaliser</em> function to free the object when the
-Haskell world no longer can access the object.  (An object is
-associated with a finaliser function when the abstract
- Haskell type @ForeignObj@ is created). The finaliser function is
-expressed in C, and is passed as argument the object:
-
-<tscreen><verb>
-void foreignFinaliser ( StgForeignObj fo )
-</verb></tscreen>
-
-when the Haskell world can no longer access the object.  Since
-@ForeignObj@s only get released when a garbage collection occurs, we
-provide ways of triggering a garbage collection from within C and from
-within Haskell.
-
-<tscreen><verb>
-void GarbageCollect()
-performGC :: IO ()
-</verb></tscreen>
-
-More information on the programmers' interface to @ForeignObj@ can be
-found in the library documentation.
-
-%************************************************************************
-%*                                                                      *
-<sect2>Avoiding monads
-<label id="glasgow-avoiding-monads">
-<p>
-<nidx>C calls to `pure C'</nidx>
-<nidx>unsafePerformIO</nidx>
-%*                                                                      *
-%************************************************************************
-
-The @_ccall_@ construct is part of the @IO@ monad because 9 out of 10
-uses will be to call imperative functions with side effects such as
-@printf@.  Use of the monad ensures that these operations happen in a
-predictable order in spite of laziness and compiler optimisations.
-
-To avoid having to be in the monad to call a C function, it is
-possible to use @unsafePerformIO@, which is available from the
-@IOExts@ module.  There are three situations where one might like to
-call a C function from outside the IO world:
-
-<itemize>
-<item>
-Calling a function with no side-effects:
-<tscreen><verb>
-atan2d :: Double -> Double -> Double
-atan2d y x = unsafePerformIO (_ccall_ atan2d y x)
-
-sincosd :: Double -> (Double, Double)
-sincosd x = unsafePerformIO $ do
-        da <- newDoubleArray (0, 1)
-        _casm_ ``sincosd( %0, &((double *)%1[0]), &((double *)%1[1]) );'' x da
-        s <- readDoubleArray da 0
-        c <- readDoubleArray da 1
-        return (s, c)
-</verb></tscreen>
-
-<item> Calling a set of functions which have side-effects but which can
-be used in a purely functional manner.
-
-For example, an imperative implementation of a purely functional
-lookup-table might be accessed using the following functions.
-
-<tscreen><verb>
-empty  :: EFS x
-update :: EFS x -> Int -> x -> EFS x
-lookup :: EFS a -> Int -> a
-
-empty = unsafePerformIO (_ccall_ emptyEFS)
-
-update a i x = unsafePerformIO $
-        makeStablePtr x         >>= \ stable_x ->
-        _ccall_ updateEFS a i stable_x
-
-lookup a i = unsafePerformIO $
-        _ccall_ lookupEFS a i   >>= \ stable_x ->
-        deRefStablePtr stable_x
-</verb></tscreen>
-
-You will almost always want to use @ForeignObj@s with this.
-
-<item> Calling a side-effecting function even though the results will
-be unpredictable.  For example the @trace@ function is defined by:
-
-<tscreen><verb>
-trace :: String -> a -> a
-trace string expr
-  = unsafePerformIO (
-	((_ccall_ PreTraceHook sTDERR{-msg-}):: IO ())  >>
-	fputs sTDERR string			        >>
-	((_ccall_ PostTraceHook sTDERR{-msg-}):: IO ()) >>
-	return expr )
-  where
-    sTDERR = (``stderr'' :: Addr)
-</verb></tscreen>
-
-(This kind of use is not highly recommended --- it is only really
-useful in debugging code.)
-</itemize>
-
-%************************************************************************
-%*                                                                      *
-<sect2>C-calling ``gotchas'' checklist
-<label id="ccall-gotchas">
-<p>
-<nidx>C call dangers</nidx>
-<nidx>CCallable</nidx>
-<nidx>CReturnable</nidx>
-%*                                                                      *
-%************************************************************************
-
-And some advice, too.
-
-<itemize>
-<item> For modules that use @_ccall_@s, etc., compile with
-@-fvia-C@.<nidx>-fvia-C option</nidx> You don't have to, but you should.
-
-Also, use the @-#include "prototypes.h"@ flag (hack) to inform the C
-compiler of the fully-prototyped types of all the C functions you
-call.  (Section <ref name="Using function headers"
-id="glasgow-foreign-headers"> says more about this...)
-
-This scheme is the <em>only</em> way that you will get <em>any</em>
-typechecking of your @_ccall_@s.  (It shouldn't be that way, but...).
-GHC will pass the flag @-Wimplicit@ to gcc so that you'll get warnings
-if any @_ccall_@ed functions have no prototypes.
-
-<item>
-Try to avoid @_ccall_@s to C~functions that take @float@
-arguments or return @float@ results.  Reason: if you do, you will
-become entangled in (ANSI?) C's rules for when arguments/results are
-promoted to @doubles@.  It's a nightmare and just not worth it.
-Use @doubles@ if possible.
-
-If you do use @floats@, check and re-check that the right thing is
-happening.  Perhaps compile with @-keep-hc-file-too@ and look at
-the intermediate C (@.hc@ file).
-
-<item> The compiler uses two non-standard type-classes when
-type-checking the arguments and results of @_ccall_@: the arguments
-(respectively result) of @_ccall_@ must be instances of the class
-@CCallable@ (respectively @CReturnable@).  Both classes may be
-imported from the module @CCall@, but this should only be
-necessary if you want to define a new instance.  (Neither class
-defines any methods --- their only function is to keep the
-type-checker happy.)
-
-The type checker must be able to figure out just which of the
-C-callable/returnable types is being used.  If it can't, you have to
-add type signatures. For example,
-
-<tscreen><verb>
-f x = _ccall_ foo x
-</verb></tscreen>
-
-is not good enough, because the compiler can't work out what type @x@
-is, nor what type the @_ccall_@ returns.  You have to write, say:
-
-<tscreen><verb>
-f :: Int -> IO Double
-f x = _ccall_ foo x
-</verb></tscreen>
-
-This table summarises the standard instances of these classes.
-
-% ToDo: check this table against implementation!
-
-<tabular ca="llll">
-<bf>Type</bf>       |<bf>CCallable</bf>|<bf>CReturnable</bf> | <bf>Which is probably...</bf> @@
-
-@Char@              | Yes  | Yes   | @unsigned char@ @@
-@Int@               | Yes  | Yes   | @long int@ @@
-@Word@              | Yes  | Yes   | @unsigned long int@ @@
-@Addr@              | Yes  | Yes   | @void *@ @@
-@Float@             | Yes  | Yes   | @float@ @@
-@Double@            | Yes  | Yes   | @double@ @@
-@()@                | No   | Yes   | @void@ @@
-@[Char]@            | Yes  | No    | @char *@ (null-terminated) @@
-                                      
-@Array@             | Yes  | No    | @unsigned long *@ @@
-@ByteArray@         | Yes  | No    | @unsigned long *@ @@
-@MutableArray@      | Yes  | No    | @unsigned long *@ @@
-@MutableByteArray@  | Yes  | No    | @unsigned long *@ @@
-                      		       
-@State@             | Yes  | Yes   | nothing!@@
-                      		       
-@StablePtr@         | Yes  | Yes   | @unsigned long *@ @@
-@ForeignObjs@       | Yes  | Yes   | see later @@
-</tabular>
-
-Actually, the @Word@ type is defined as being the same size as a
-pointer on the target architecture, which is <em>probably</em>
-@unsigned long int@.  
-
-The brave and careful programmer can add their own instances of these
-classes for the following types:
-
-<itemize>
-<item>
-A <em>boxed-primitive</em> type may be made an instance of both
-@CCallable@ and @CReturnable@.  
-
-A boxed primitive type is any data type with a
-single unary constructor with a single primitive argument.  For
-example, the following are all boxed primitive types:
-
-<tscreen><verb>
-Int
-Double
-data XDisplay = XDisplay Addr#
-data EFS a = EFS# ForeignObj#
-</verb></tscreen>
-
-<tscreen><verb>
-instance CCallable   (EFS a)
-instance CReturnable (EFS a)
-</verb></tscreen>
-
-<item> Any datatype with a single nullary constructor may be made an
-instance of @CReturnable@.  For example:
-
-<tscreen><verb>
-data MyVoid = MyVoid
-instance CReturnable MyVoid
-</verb></tscreen>
-
-<item> As at version 2.09, @String@ (i.e., @[Char]@) is still
-not a @CReturnable@ type.
-
-Also, the now-builtin type @PackedString@ is neither
-@CCallable@ nor @CReturnable@.  (But there are functions in
-the PackedString interface to let you get at the necessary bits...)
-</itemize>
-
-<item> The code-generator will complain if you attempt to use @%r@ in
-a @_casm_@ whose result type is @IO ()@; or if you don't use @%r@
-<em>precisely</em> once for any other result type.  These messages are
-supposed to be helpful and catch bugs---please tell us if they wreck
-your life.
-
-<item> If you call out to C code which may trigger the Haskell garbage
-collector or create new threads (examples of this later...), then you
-must use the @_ccall_GC_@<nidx>_ccall_GC_ primitive</nidx> or
-@_casm_GC_@<nidx>_casm_GC_ primitive</nidx> variant of C-calls.  (This
-does not work with the native code generator - use @\fvia-C@.) This
-stuff is hairy with a capital H!  </itemize>
-
-<sect1> Multi-parameter type classes
-<label id="multi-param-type-classes">
-<p>
-
-This section documents GHC's implementation of multi-paramter type
-classes.  There's lots of background in the paper <url name="Type
-classes: exploring the design space"
-url="http://www.dcs.gla.ac.uk/~simonpj/multi.ps.gz"> (Simon Peyton
-Jones, Mark Jones, Erik Meijer).
-
-I'd like to thank people who reported shorcomings in the GHC 3.02
-implementation.  Our default decisions were all conservative ones, and
-the experience of these heroic pioneers has given useful concrete
-examples to support several generalisations.  (These appear below as
-design choices not implemented in 3.02.)
-
-I've discussed these notes with Mark Jones, and I believe that Hugs
-will migrate towards the same design choices as I outline here.
-Thanks to him, and to many others who have offered very useful
-feedback.
-
-<sect2>Types
-<p>
-
-There are the following restrictions on the form of a qualified 
-type:
-
-<tscreen><verb>
-  forall tv1..tvn (c1, ...,cn) => type
-</verb></tscreen>
-
-(Here, I write the "foralls" explicitly, although the Haskell source
-language omits them; in Haskell 1.4, all the free type variables of an
-explicit source-language type signature are universally quantified,
-except for the class type variables in a class declaration.  However,
-in GHC, you can give the foralls if you want.  See Section <ref
-name="Explicit universal quantification"
-id="universal-quantification">).
-
-<enum>
-
-<item> <bf>Each universally quantified type variable 
-@tvi@ must be mentioned (i.e. appear free) in @type@</bf>.
-
-The reason for this is that a value with a type that does not obey
-this restriction could not be used without introducing
-ambiguity. Here, for example, is an illegal type:
-
-<tscreen><verb>
-  forall a. Eq a => Int
-</verb></tscreen>
-
-When a value with this type was used, the constraint <tt>Eq tv</tt>
-would be introduced where <tt>tv</tt> is a fresh type variable, and
-(in the dictionary-translation implementation) the value would be
-applied to a dictionary for <tt>Eq tv</tt>.  The difficulty is that we
-can never know which instance of <tt>Eq</tt> to use because we never
-get any more information about <tt>tv</tt>.
-
-<item> <bf>Every constraint @ci@ must mention at least one of the
-universally quantified type variables @tvi@</bf>.
-
-For example, this type is OK because <tt>C a b</tt> mentions the
-universally quantified type variable <tt>b</tt>:
-
-<tscreen><verb>
-  forall a. C a b => burble
-</verb></tscreen>
-
-The next type is illegal because the constraint <tt>Eq b</tt> does not
-mention <tt>a</tt>:
-
-<tscreen><verb>
-  forall a. Eq b => burble
-</verb></tscreen>
-
-The reason for this restriction is milder than the other one.  The
-excluded types are never useful or necessary (because the offending
-context doesn't need to be witnessed at this point; it can be floated
-out).  Furthermore, floating them out increases sharing. Lastly,
-excluding them is a conservative choice; it leaves a patch of
-territory free in case we need it later.
-
-</enum>
-
-These restrictions apply to all types, whether declared in a type signature
-or inferred.
-
-Unlike Haskell 1.4, constraints in types do <bf>not</bf> have to be of
-the form <em>(class type-variables)</em>.  Thus, these type signatures
-are perfectly OK
-
-<tscreen><verb>
-  f :: Eq (m a) => [m a] -> [m a]
-  g :: Eq [a] => ...
-</verb></tscreen>
-
-This choice recovers principal types, a property that Haskell 1.4 does not have.
-
-<sect2>Class declarations
-<p>
-
-<enum>
-
-<item> <bf>Multi-parameter type classes are permitted</bf>. For example:
-
-<tscreen><verb>
-  class Collection c a where
-    union :: c a -> c a -> c a
-    ...etc..
-</verb></tscreen>
-
-
-<item> <bf>The class hierarchy must be acyclic</bf>.  However, the definition
-of "acyclic" involves only the superclass relationships.  For example,
-this is OK:
-
-<tscreen><verb>
-  class C a where { 
-    op :: D b => a -> b -> b
-  }
-
-  class C a => D a where { ... }
-</verb></tscreen>
-
-Here, <tt>C</tt> is a superclass of <tt>D</tt>, but it's OK for a
-class operation <tt>op</tt> of <tt>C</tt> to mention <tt>D</tt>.  (It
-would not be OK for <tt>D</tt> to be a superclass of <tt>C</tt>.)
-
-<item> <bf>There are no restrictions on the context in a class declaration
-(which introduces superclasses), except that the class hierarchy must
-be acyclic</bf>.  So these class declarations are OK:
-
-<tscreen><verb>
-  class Functor (m k) => FiniteMap m k where
-    ...
-
-  class (Monad m, Monad (t m)) => Transform t m where
-    lift :: m a -> (t m) a
-</verb></tscreen>
-
-<item> <bf>In the signature of a class operation, every constraint
-must mention at least one type variable that is not a class type
-variable</bf>.
-
-Thus:
-
-<tscreen><verb>
-  class Collection c a where
-    mapC :: Collection c b => (a->b) -> c a -> c b
-</verb></tscreen>
-
-is OK because the constraint <tt>(Collection a b)</tt> mentions
-<tt>b</tt>, even though it also mentions the class variable
-<tt>a</tt>.  On the other hand:
-
-<tscreen><verb>
-  class C a where
-    op :: Eq a => (a,b) -> (a,b)
-</verb></tscreen>
-
-is not OK because the constraint <tt>(Eq a)</tt> mentions on the class
-type variable <tt>a</tt>, but not <tt>b</tt>.  However, any such
-example is easily fixed by moving the offending context up to the
-superclass context:
-
-<tscreen><verb>
-  class Eq a => C a where
-    op ::(a,b) -> (a,b)
-</verb></tscreen>
-
-A yet more relaxed rule would allow the context of a class-op signature
-to mention only class type variables.  However, that conflicts with
-Rule 1(b) for types above.
-
-<item> <bf>The type of each class operation must mention <em/all/ of
-the class type variables</bf>.  For example:
-
-<tscreen><verb>
-  class Coll s a where
-    empty  :: s
-    insert :: s -> a -> s
-</verb></tscreen>
-
-is not OK, because the type of <tt>empty</tt> doesn't mention
-<tt>a</tt>.  This rule is a consequence of Rule 1(a), above, for
-types, and has the same motivation.
-
-Sometimes, offending class declarations exhibit misunderstandings.  For
-example, <tt>Coll</tt> might be rewritten
-
-<tscreen><verb>
-  class Coll s a where
-    empty  :: s a
-    insert :: s a -> a -> s a
-</verb></tscreen>
-
-which makes the connection between the type of a collection of
-<tt>a</tt>'s (namely <tt>(s a)</tt>) and the element type <tt>a</tt>.
-Occasionally this really doesn't work, in which case you can split the
-class like this:
-
-<tscreen><verb>
-  class CollE s where
-    empty  :: s
-
-  class CollE s => Coll s a where
-    insert :: s -> a -> s
-</verb></tscreen>
-
-</enum>
-
-<sect2>Instance declarations
-<p>
-
-<enum>
-
-<item> <bf>Instance declarations may not overlap</bf>.  The two instance
-declarations
-
-<tscreen><verb>
-  instance context1 => C type1 where ...
-  instance context2 => C type2 where ...
-</verb></tscreen>
-
-"overlap" if @type1@ and @type2@ unify
-
-However, if you give the command line option
-@-fallow-overlapping-instances@<nidx>-fallow-overlapping-instances
-option</nidx> then two overlapping instance declarations are permitted
-iff
-
-<itemize>
-<item> EITHER @type1@ and @type2@ do not unify
-<item> OR @type2@ is a substitution instance of @type1@
-		(but not identical to @type1@)
-<item> OR vice versa
-</itemize>
-
-Notice that these rules
-
-<itemize>
-<item> make it clear which instance decl to use
-	   (pick the most specific one that matches)
-
-<item> do not mention the contexts @context1@, @context2@
-	    Reason: you can pick which instance decl
-	    "matches" based on the type.
-</itemize>
-
-Regrettably, GHC doesn't guarantee to detect overlapping instance
-declarations if they appear in different modules.  GHC can "see" the
-instance declarations in the transitive closure of all the modules
-imported by the one being compiled, so it can "see" all instance decls
-when it is compiling <tt>Main</tt>.  However, it currently chooses not
-to look at ones that can't possibly be of use in the module currently
-being compiled, in the interests of efficiency.  (Perhaps we should
-change that decision, at least for <tt>Main</tt>.)
-
-<item> <bf>There are no restrictions on the type in an instance
-<em/head/, except that at least one must not be a type variable</bf>.
-The instance "head" is the bit after the "=>" in an instance decl. For
-example, these are OK:
-
-<tscreen><verb>
-  instance C Int a where ...
-
-  instance D (Int, Int) where ...
-
-  instance E [[a]] where ...
-</verb></tscreen>
-
-Note that instance heads <bf>may</bf> contain repeated type variables.
-For example, this is OK:
-
-<tscreen><verb>
-  instance Stateful (ST s) (MutVar s) where ...
-</verb></tscreen>
-
-The "at least one not a type variable" restriction is to ensure that
-context reduction terminates: each reduction step removes one type
-constructor.  For example, the following would make the type checker
-loop if it wasn't excluded:
-
-<tscreen><verb>
-  instance C a => C a where ...
-</verb></tscreen>
-
-There are two situations in which the rule is a bit of a pain. First,
-if one allows overlapping instance declarations then it's quite
-convenient to have a "default instance" declaration that applies if
-something more specific does not:
-
-<tscreen><verb>
-  instance C a where
-    op = ... -- Default
-</verb></tscreen>
-
-Second, sometimes you might want to use the following to get the
-effect of a "class synonym":
-
-<tscreen><verb>
-  class (C1 a, C2 a, C3 a) => C a where { }
-
-  instance (C1 a, C2 a, C3 a) => C a where { }
-</verb></tscreen>
-
-This allows you to write shorter signatures:
-
-<tscreen><verb>
-  f :: C a => ...
-</verb></tscreen>
-
-instead of
-
-<tscreen><verb>
-  f :: (C1 a, C2 a, C3 a) => ...
-</verb></tscreen>
-
-I'm on the lookout for a simple rule that preserves decidability while
-allowing these idioms.  The experimental flag
-@-fallow-undecidable-instances@<nidx>-fallow-undecidable-instances
-option</nidx> lifts this restriction, allowing all the types in an
-instance head to be type variables.
-
-<item> <bf>Unlike Haskell 1.4, instance heads may use type
-synonyms</bf>.  As always, using a type synonym is just shorthand for
-writing the RHS of the type synonym definition.  For example:
-
-<tscreen><verb>
-  type Point = (Int,Int) 
-  instance C Point   where ...
-  instance C [Point] where ...
-</verb></tscreen>
-
-is legal.  However, if you added
-
-<tscreen><verb>
-  instance C (Int,Int) where ...
-</verb></tscreen>
-
-as well, then the compiler will complain about the overlapping
-(actually, identical) instance declarations.  As always, type synonyms
-must be fully applied.  You cannot, for example, write:
-
-<tscreen><verb>
-  type P a = [[a]]
-  instance Monad P where ...
-</verb></tscreen>
-
-This design decision is independent of all the others, and easily
-reversed, but it makes sense to me.
-
-<item><bf>The types in an instance-declaration <em/context/ must all
-be type variables</bf>. Thus
-
-<tscreen><verb>
-  instance C a b => Eq (a,b) where ...
-</verb></tscreen>
-
-is OK, but
-
-<tscreen><verb>
-  instance C Int b => Foo b where ...
-</verb></tscreen>
-
-is not OK.  Again, the intent here is to make sure that context
-reduction terminates.
-
-Voluminous correspondence on the Haskell mailing list has convinced me
-that it's worth experimenting with a more liberal rule.  If you use
-the flag <tt>-fallow-undecidable-instances</tt> you can use arbitrary
-types in an instance context.  Termination is ensured by having a
-fixed-depth recursion stack.  If you exceed the stack depth you get a
-sort of backtrace, and the opportunity to increase the stack depth
-with <tt>-fcontext-stack</tt><em/N/.
-
-</enum>
-
-% -----------------------------------------------------------------------------
-<sect1>Explicit universal quantification
-<label id="universal-quantification">
-<p>
-
-GHC now allows you to write explicitly quantified types.  GHC's
-syntax for this now agrees with Hugs's, namely:
-
-<tscreen><verb>
-	forall a b. (Ord a, Eq  b) => a -> b -> a
-</verb></tscreen>
-
-The context is, of course, optional.  You can't use <tt>forall</tt> as
-a type variable any more!
-
-Haskell type signatures are implicitly quantified.  The <tt>forall</tt>
-allows us to say exactly what this means.  For example:
-
-<tscreen><verb>
-	g :: b -> b
-</verb></tscreen>
-
-means this:
-
-<tscreen><verb>
-	g :: forall b. (b -> b)
-</verb></tscreen>
-
-The two are treated identically.
-
-<sect2>Universally-quantified data type fields
-<label id="univ">
-<p>
-
-In a <tt>data</tt> or <tt>newtype</tt> declaration one can quantify
-the types of the constructor arguments.  Here are several examples:
-
-<tscreen><verb>
-data T a = T1 (forall b. b -> b -> b) a
-
-data MonadT m = MkMonad { return :: forall a. a -> m a,
-			  bind   :: forall a b. m a -> (a -> m b) -> m b
-		        }
-
-newtype Swizzle = MkSwizzle (Ord a => [a] -> [a])
-</verb></tscreen>
-
-The constructors now have so-called <em/rank 2/ polymorphic
-types, in which there is a for-all in the argument types.:
-
-<tscreen><verb>
-T1 :: forall a. (forall b. b -> b -> b) -> a -> T1 a
-MkMonad :: forall m. (forall a. a -> m a)
-		  -> (forall a b. m a -> (a -> m b) -> m b)
-		  -> MonadT m
-MkSwizzle :: (Ord a => [a] -> [a]) -> Swizzle
-</verb></tscreen>
-
-Notice that you don't need to use a <tt>forall</tt> if there's an
-explicit context.  For example in the first argument of the
-constructor <tt>MkSwizzle</tt>, an implicit "<tt>forall a.</tt>" is
-prefixed to the argument type.  The implicit <tt>forall</tt>
-quantifies all type variables that are not already in scope, and are
-mentioned in the type quantified over.
-
-As for type signatures, implicit quantification happens for non-overloaded
-types too.  So if you write this:
-<tscreen><verb>
-  data T a = MkT (Either a b) (b -> b)
-</verb></tscreen>
-it's just as if you had written this:
-<tscreen><verb>
-  data T a = MkT (forall b. Either a b) (forall b. b -> b)
-</verb></tscreen>
-That is, since the type variable <tt>b</tt> isn't in scope, it's
-implicitly universally quantified.  (Arguably, it would be better
-to <em>require</em> explicit quantification on constructor arguments
-where that is what is wanted.  Feedback welcomed.)
-
-<sect2> Construction 
-<p>
-
-You construct values of types <tt>T1, MonadT, Swizzle</tt> by applying
-the constructor to suitable values, just as usual.  For example,
-
-<tscreen><verb>
-(T1 (\xy->x) 3) :: T Int
-
-(MkSwizzle sort)    :: Swizzle
-(MkSwizzle reverse) :: Swizzle
-
-(let r x = Just x
-     b m k = case m of
-		Just y -> k y
-		Nothing -> Nothing
-  in
-  MkMonad r b) :: MonadT Maybe
-</verb></tscreen>
-
-The type of the argument can, as usual, be more general than the type
-required, as <tt>(MkSwizzle reverse)</tt> shows.  (<tt>reverse</tt>
-does not need the <tt>Ord</tt> constraint.)
-
-<sect2>Pattern matching
-<p>
-
-When you use pattern matching, the bound variables may now have
-polymorphic types.  For example:
-
-<tscreen><verb>
-	f :: T a -> a -> (a, Char)
-	f (T1 f k) x = (f k x, f 'c' 'd')
-
-	g :: (Ord a, Ord b) => Swizzle -> [a] -> (a -> b) -> [b]
-	g (MkSwizzle s) xs f = s (map f (s xs))
-
-	h :: MonadT m -> [m a] -> m [a]
-	h m [] = return m []
-	h m (x:xs) = bind m x 		$ \y ->
-		      bind m (h m xs)	$ \ys ->
-		      return m (y:ys)
-</verb></tscreen>
-
-In the function <tt>h</tt> we use the record selectors <tt>return</tt>
-and <tt>bind</tt> to extract the polymorphic bind and return functions
-from the <tt>MonadT</tt> data structure, rather than using pattern
-matching.
-
-You cannot pattern-match against an argument that is polymorphic.
-For example:
-<tscreen><verb>
-	newtype TIM s a = TIM (ST s (Maybe a))
-
-	runTIM :: (forall s. TIM s a) -> Maybe a
-	runTIM (TIM m) = runST m
-</verb></tscreen>
-
-Here the pattern-match fails, because you can't pattern-match against
-an argument of type <tt>(forall s. TIM s a)</tt>.  Instead you 
-must bind the variable and pattern match in the right hand side:
-<tscreen><verb>
-	runTIM :: (forall s. TIM s a) -> Maybe a
-	runTIM tm = case tm of { TIM m -> runST m }
-</verb></tscreen>
-The <tt>tm</tt> on the right hand side is (invisibly) instantiated, like
-any polymorphic value at its occurrence site, and now you can pattern-match
-against it.
-
-<sect2>The partial-application restriction
-<p>
-
-There is really only one way in which data structures with polymorphic
-components might surprise you: you must not partially apply them.
-For example, this is illegal:
-
-<tscreen><verb>
-	map MkSwizzle [sort, reverse]
-</verb></tscreen>
-
-The restriction is this: <em>every subexpression of the program must
-have a type that has no for-alls, except that in a function
-application (f e1 ... en) the partial applications are not subject to
-this rule</em>.  The restriction makes type inference feasible.
-
-In the illegal example, the sub-expression <tt>MkSwizzle</tt> has the
-polymorphic type <tt>(Ord b => [b] -> [b]) -> Swizzle</tt> and is not
-a sub-expression of an enclosing application.  On the other hand, this
-expression is OK:
-
-<tscreen><verb>
-	map (T1 (\a b -> a)) [1,2,3]
-</verb></tscreen>
-
-even though it involves a partial application of <tt>T1</tt>, because
-the sub-expression <tt>T1 (\a b -> a)</tt> has type <tt>Int -> T
-Int</tt>.
-
-<sect2>Type signatures
-<label id="sigs">
-<p>
-
-Once you have data constructors with universally-quantified fields, or
-constants such as <tt>runST</tt> that have rank-2 types, it isn't long
-before you discover that you need more!  Consider:
-
-<tscreen><verb>
-  mkTs f x y = [T1 f x, T1 f y]
-</verb></tscreen>
-
-<tt>mkTs</tt> is a fuction that constructs some values of type
-<tt>T</tt>, using some pieces passed to it.  The trouble is that since
-<tt>f</tt> is a function argument, Haskell assumes that it is
-monomorphic, so we'll get a type error when applying <tt>T1</tt> to
-it.  This is a rather silly example, but the problem really bites in
-practice.  Lots of people trip over the fact that you can't make
-"wrappers functions" for <tt>runST</tt> for exactly the same reason.
-In short, it is impossible to build abstractions around functions with
-rank-2 types.
-
-The solution is fairly clear.  We provide the ability to give a rank-2
-type signature for <em>ordinary</em> functions (not only data
-constructors), thus:
-
-<tscreen><verb>
-  mkTs :: (forall b. b -> b -> b) -> a -> [T a]
-  mkTs f x y = [T1 f x, T1 f y]
-</verb></tscreen>
-
-This type signature tells the compiler to attribute <tt>f</tt> with
-the polymorphic type <tt>(forall b. b -> b -> b)</tt> when type
-checking the body of <tt>mkTs</tt>, so now the application of
-<tt>T1</tt> is fine.
-
-There are two restrictions:
-
-<itemize>
-<item> You can only define a rank 2 type, specified by the following
-grammar:
-
-<tscreen><verb>
-   rank2type ::= [forall tyvars .] [context =>] funty
-   funty     ::= ([forall tyvars .] [context =>] ty) -> funty
-               | ty
-   ty        ::= ...current Haskell monotype syntax...
-</verb></tscreen>
-
-Informally, the universal quantification must all be right at the beginning, 
-or at the top level of a function argument.
-
-<item> There is a restriction on the definition of a function whose
-type signature is a rank-2 type: the polymorphic arguments must be
-matched on the left hand side of the "<tt>=</tt>" sign.  You can't
-define <tt>mkTs</tt> like this:
-
-<tscreen><verb>
-  mkTs :: (forall b. b -> b -> b) -> a -> [T a]
-  mkTs = \ f x y -> [T1 f x, T1 f y]
-</verb></tscreen>
-
-
-The same partial-application rule applies to ordinary functions with
-rank-2 types as applied to data constructors.  
-
-</itemize>
-
-% -----------------------------------------------------------------------------
-<sect1>Existentially quantified data constructors
-<label id="existential-quantification">
-<p>
-
-The idea of using existential quantification in data type declarations
-was suggested by Laufer (I believe, thought doubtless someone will
-correct me), and implemented in Hope+. It's been in Lennart
-Augustsson's <tt>hbc</tt> Haskell compiler for several years, and
-proved very useful.  Here's the idea.  Consider the declaration:
-
-<tscreen><verb>
-  data Foo = forall a. MkFoo a (a -> Bool)
-	   | Nil
-</verb></tscreen>
-
-The data type <tt>Foo</tt> has two constructors with types:
-
-<tscreen><verb>
-  MkFoo :: forall a. a -> (a -> Bool) -> Foo
-  Nil   :: Foo
-</verb></tscreen>
-
-Notice that the type variable <tt>a</tt> in the type of <tt>MkFoo</tt>
-does not appear in the data type itself, which is plain <tt>Foo</tt>.
-For example, the following expression is fine:
-
-<tscreen><verb>
-  [MkFoo 3 even, MkFoo 'c' isUpper] :: [Foo]
-</verb></tscreen>
-
-Here, <tt>(MkFoo 3 even)</tt> packages an integer with a function
-<tt>even</tt> that maps an integer to <tt>Bool</tt>; and <tt>MkFoo 'c'
-isUpper</tt> packages a character with a compatible function.  These
-two things are each of type <tt>Foo</tt> and can be put in a list.
-
-What can we do with a value of type <tt>Foo</tt>?.  In particular,
-what happens when we pattern-match on <tt>MkFoo</tt>?
-
-<tscreen><verb>
-  f (MkFoo val fn) = ???
-</verb></tscreen>
-
-Since all we know about <tt>val</tt> and <tt>fn</tt> is that they
-are compatible, the only (useful) thing we can do with them is to
-apply <tt>fn</tt> to <tt>val</tt> to get a boolean.  For example:
-
-<tscreen><verb>
-  f :: Foo -> Bool
-  f (MkFoo val fn) = fn val
-</verb></tscreen>
-
-What this allows us to do is to package heterogenous values
-together with a bunch of functions that manipulate them, and then treat
-that collection of packages in a uniform manner.  You can express
-quite a bit of object-oriented-like programming this way.
-
-<sect2>Why existential?
-<label id="existential">
-<p>
-
-What has this to do with <em>existential</em> quantification?
-Simply that <tt>MkFoo</tt> has the (nearly) isomorphic type
-
-<tscreen><verb>
-  MkFoo :: (exists a . (a, a -> Bool)) -> Foo
-</verb></tscreen>
-
-But Haskell programmers can safely think of the ordinary
-<em>universally</em> quantified type given above, thereby avoiding
-adding a new existential quantification construct.
-
-<sect2>Type classes
-<p>
-
-An easy extension (implemented in <tt>hbc</tt>) is to allow 
-arbitrary contexts before the constructor.  For example:
-
-<tscreen><verb>
-  data Baz = forall a. Eq a => Baz1 a a
-	   | forall b. Show b => Baz2 b (b -> b)
-</verb></tscreen>
-
-The two constructors have the types you'd expect:
-
-<tscreen><verb>
-  Baz1 :: forall a. Eq a => a -> a -> Baz
-  Baz2 :: forall b. Show b => b -> (b -> b) -> Baz
-</verb></tscreen>
-
-But when pattern matching on <tt>Baz1</tt> the matched values can be compared
-for equality, and when pattern matching on <tt>Baz2</tt> the first matched
-value can be converted to a string (as well as applying the function to it).  
-So this program is legal:
-
-<tscreen><verb>
-  f :: Baz -> String
-  f (Baz1 p q) | p == q    = "Yes"
-	       | otherwise = "No"
-  f (Baz1 v fn)            = show (fn v)
-</verb></tscreen>
-
-Operationally, in a dictionary-passing implementation, the
-constructors <tt>Baz1</tt> and <tt>Baz2</tt> must store the
-dictionaries for <tt>Eq</tt> and <tt>Show</tt> respectively, and
-extract it on pattern matching.
-
-Notice the way that the syntax fits smoothly with that used for
-universal quantification earlier.
-
-<sect2>Restrictions
-<p>
-
-There are several restrictions on the ways in which existentially-quantified
-constructors can be use.
-
-<itemize>
-
-<item> When pattern matching, each pattern match introduces a new,
-distinct, type for each existential type variable.  These types cannot
-be unified with any other type, nor can they escape from the scope of
-the pattern match.  For example, these fragments are incorrect:
-
-<tscreen><verb>
-  f1 (MkFoo a f) = a
-</verb></tscreen>
-
-Here, the type bound by <tt>MkFoo</tt> "escapes", because <tt>a</tt>
-is the result of <tt>f1</tt>.  One way to see why this is wrong is to
-ask what type <tt>f1</tt> has:
-
-<tscreen><verb>
-  f1 :: Foo -> a             -- Weird!
-</verb></tscreen>
-
-What is this "<tt>a</tt>" in the result type? Clearly we don't mean
-this:
-
-<tscreen><verb>
-  f1 :: forall a. Foo -> a   -- Wrong!
-</verb></tscreen>
-
-The original program is just plain wrong.  Here's another sort of error
-
-<tscreen><verb>
-  f2 (Baz1 a b) (Baz1 p q) = a==q
-</verb></tscreen>
-
-It's ok to say <tt>a==b</tt> or <tt>p==q</tt>, but
-<tt>a==q</tt> is wrong because it equates the two distinct types arising
-from the two <tt>Baz1</tt> constructors.
-
-
-<item>You can't pattern-match on an existentially quantified
-constructor in a <tt>let</tt> or <tt>where</tt> group of
-bindings. So this is illegal:
-
-<tscreen><verb>
-  f3 x = a==b where { Baz1 a b = x }
-</verb></tscreen>
-
-You can only pattern-match
-on an existentially-quantified constructor in a <tt>case</tt> expression or
-in the patterns of a function definition.
-
-The reason for this restriction is really an implementation one.
-Type-checking binding groups is already a nightmare without
-existentials complicating the picture.  Also an existential pattern
-binding at the top level of a module doesn't make sense, because it's
-not clear how to prevent the existentially-quantified type "escaping".
-So for now, there's a simple-to-state restriction.  We'll see how
-annoying it is.  
-
-<item>You can't use existential quantification for <tt>newtype</tt> 
-declarations.  So this is illegal:
-
-<tscreen><verb>
-  newtype T = forall a. Ord a => MkT a
-</verb></tscreen>
-
-Reason: a value of type <tt>T</tt> must be represented as a pair
-of a dictionary for <tt>Ord t</tt> and a value of type <tt>t</tt>.
-That contradicts the idea that <tt>newtype</tt> should have no 
-concrete representation.  You can get just the same efficiency and effect
-by using <tt>data</tt> instead of <tt>newtype</tt>.  If there is no
-overloading involved, then there is more of a case for allowing
-an existentially-quantified <tt>newtype</tt>, because the <tt>data</tt>
-because the <tt>data</tt> version does carry an implementation cost,
-but single-field existentially quantified constructors aren't much
-use.  So the simple restriction (no existential stuff on <tt>newtype</tt>)
-stands, unless there are convincing reasons to change it.
-
-
-<item> You can't use <tt>deriving</tt> to define instances of a
-data type with existentially quantified data constructors.
-
-Reason: in most cases it would not make sense. For example:#
-<tscreen><verb>
-  data T = forall a. MkT [a] deriving( Eq )
-</verb></tscreen>
-To derive <tt>Eq</tt> in the standard way we would need to have equality
-between the single component of two <tt>MkT</tt> constructors:
-<tscreen><verb>
-  instance Eq T where
-    (MkT a) == (MkT b) = ???
-</verb></tscreen>
-But <tt>a</tt> and <tt>b</tt> have distinct types, and so can't be compared.
-It's just about possible to imagine examples in which the derived instance
-would make sense, but it seems altogether simpler simply to prohibit such
-declarations.  Define your own instances!
-</itemize>
-
-
-<sect1> <idx/Assertions/ 
-<label id="sec:assertions">
-<p>
-
-If you want to make use of assertions in your standard Haskell code, you
-could define a function like the following:
-
-<tscreen><verb>
-assert :: Bool -> a -> a
-assert False x = error "assertion failed!"
-assert _     x = x
-</verb></tscreen>
-
-which works, but gives you back a less than useful error message --
-an assertion failed, but which and where?
-
-One way out is to define an extended <tt/assert/ function which also
-takes a descriptive string to include in the error message and
-perhaps combine this with the use of a pre-processor which inserts
-the source location where <tt/assert/ was used.
-
-Ghc offers a helping hand here, doing all of this for you. For every
-use of <tt/assert/ in the user's source:
-
-<tscreen><verb>
-kelvinToC :: Double -> Double
-kelvinToC k = assert (k &gt;= 0.0) (k+273.15)
-</verb></tscreen>
-
-Ghc will rewrite this to also include the source location where the
-assertion was made, 
-
-<tscreen><verb>
-assert pred val ==> assertError "Main.hs|15" pred val
-</verb></tscreen>
-
-The rewrite is only performed by the compiler when it spots
-applications of <tt>Exception.assert</tt>, so you can still define and
-use your own versions of <tt/assert/, should you so wish. If not,
-import <tt/Exception/ to make use <tt/assert/ in your code.
-
-To have the compiler ignore uses of assert, use the compiler option
-@-fignore-asserts@. <nidx>-fignore-asserts option</nidx> That is,
-expressions of the form @assert pred e@ will be rewritten to @e@.
-
-Assertion failures can be caught, see the documentation for the
-Hugs/GHC Exception library for information of how.
-
-% -----------------------------------------------------------------------------
-<sect1>Scoped Type Variables
-<label id="scoped-type-variables">
-<p>
-
-A <em/pattern type signature/ can introduce a <em/scoped type
-variable/.  For example
-
-<tscreen><verb>
-f (xs::[a]) = ys ++ ys
-	   where
-	      ys :: [a]
-	      ys = reverse xs 
-</verb></tscreen>
-
-The pattern @(xs::[a])@ includes a type signature for @xs@.
-This brings the type variable @a@ into scope; it scopes over
-all the patterns and right hand sides for this equation for @f@.
-In particular, it is in scope at the type signature for @y@.
-
-At ordinary type signatures, such as that for @ys@, any type variables
-mentioned in the type signature <em/that are not in scope/ are
-implicitly universally quantified.  (If there are no type variables in
-scope, all type variables mentioned in the signature are universally
-quantified, which is just as in Haskell 98.)  In this case, since @a@
-is in scope, it is not universally quantified, so the type of @ys@ is
-the same as that of @xs@.  In Haskell 98 it is not possible to declare
-a type for @ys@; a major benefit of scoped type variables is that
-it becomes possible to do so.
-
-Scoped type variables are implemented in both GHC and Hugs.  Where the
-implementations differ from the specification below, those differences
-are noted.
-
-So much for the basic idea.  Here are the details.
-
-<sect2>Scope and implicit quantification
-<p>
-
-<itemize>
-<item> All the type variables mentioned in the patterns for a single 
-function definition equation, that are not already in scope,
-are brought into scope by the patterns.  We describe this set as
-the <em/type variables bound by the equation/.
-
-<item> The type variables thus brought into scope may be mentioned
-in ordinary type signatures or pattern type signatures anywhere within
-their scope.
-
-<item> In ordinary type signatures, any type variable mentioned in the
-signature that is in scope is <em/not/ universally quantified.
-
-<item> Ordinary type signatures do not bring any new type variables
-into scope (except in the type signature itself!). So this is illegal:
-
-<tscreen><verb>
-  f :: a -> a
-  f x = x::a
-</verb></tscreen>
-
-It's illegal because @a@ is not in scope in the body of @f@,
-so the ordinary signature @x::a@ is equivalent to @x::forall a.a@;
-and that is an incorrect typing.
-
-<item> There is no implicit universal quantification on pattern type
-signatures, nor may one write an explicit @forall@ type in a pattern
-type signature.  The pattern type signature is a monotype.
-
-<item> 
-The type variables in the head of a @class@ or @instance@ declaration
-scope over the methods defined in the @where@ part.  For example:
-
-<tscreen><verb>
-  class C a where
-    op :: [a] -> a
-
-    op xs = let ys::[a]
-		ys = reverse xs
-	    in
-	    head ys
-</verb></tscreen>
-
-(Not implemented in Hugs yet, Dec 98).
-</itemize>
-
-<sect2>Polymorphism
-<p>
-
-<itemize>
-<item> Pattern type signatures are completely orthogonal to ordinary, separate
-type signatures.  The two can be used independently or together.  There is
-no scoping associated with the names of the type variables in a separate type signature.
-
-<tscreen><verb>
-   f :: [a] -> [a]
-   f (xs::[b]) = reverse xs
-</verb></tscreen>
-
-<item> The function must be polymorphic in the type variables
-bound by all its equations.  Operationally, the type variables bound
-by one equation must not:
-
-<itemize>
-<item> Be unified with a type (such as @Int@, or @[a]@).
-<item> Be unified with a type variable free in the environment.
-<item> Be unified with each other.  (They may unify with the type variables 
-bound by another equation for the same function, of course.)
-</itemize>
-
-For example, the following all fail to type check:
-
-<tscreen><verb>
-  f (x::a) (y::b) = [x,y]	-- a unifies with b
-
-  g (x::a) = x + 1::Int		-- a unifies with Int
-
-  h x = let k (y::a) = [x,y]	-- a is free in the
-	in k x			-- environment
-
-  k (x::a) True    = ...	-- a unifies with Int
-  k (x::Int) False = ...
-
-  w :: [b] -> [b]
-  w (x::a) = x			-- a unifies with [b]
-</verb></tscreen>
-
-<item> The pattern-bound type variable may, however, be constrained
-by the context of the principal type, thus:
-
-<tscreen><verb>
-  f (x::a) (y::a) = x+y*2
-</verb></tscreen>
-
-gets the inferred type: @forall a. Num a => a -> a -> a@.
-</itemize>
-
-<sect2>Result type signatures
-<p>
-
-<itemize>
-<item> The result type of a function can be given a signature,
-thus:
-
-<tscreen><verb>
-  f (x::a) :: [a] = [x,x,x]
-</verb></tscreen>
-
-The final @":: [a]"@ after all the patterns gives a signature to the
-result type.  Sometimes this is the only way of naming the type variable
-you want:
-
-<tscreen><verb>
-  f :: Int -> [a] -> [a]
-  f n :: ([a] -> [a]) = let g (x::a, y::a) = (y,x)
-			in \xs -> map g (reverse xs `zip` xs)
-</verb></tscreen>
-
-</itemize>
-
-Result type signatures are not yet implemented in Hugs.
-
-<sect2>Pattern signatures on other constructs
-<p>
-
-<itemize>
-<item> A pattern type signature can be on an arbitrary sub-pattern, not
-just on a variable:
-
-<tscreen><verb>
-  f ((x,y)::(a,b)) = (y,x) :: (b,a)
-</verb></tscreen>
-
-<item> Pattern type signatures, including the result part, can be used
-in lambda abstractions:
-
-<tscreen><verb>
-  (\ (x::a, y) :: a -> x)
-</verb></tscreen>
-
-Type variables bound by these patterns must be polymorphic in
-the sense defined above.
-For example:
-
-<tscreen><verb>
-  f1 (x::c) = f1 x	-- ok
-  f2 = \(x::c) -> f2 x	-- not ok
-</verb></tscreen>
-
-Here, @f1@ is OK, but @f2@ is not, because @c@ gets unified
-with a type variable free in the environment, in this
-case, the type of @f2@, which is in the environment when
-the lambda abstraction is checked.
-
-<item> Pattern type signatures, including the result part, can be used
-in @case@ expressions:
-
-<tscreen><verb>
-  case e of { (x::a, y) :: a -> x } 
-</verb></tscreen>
-
-The pattern-bound type variables must, as usual, 
-be polymorphic in the following sense: each case alternative,
-considered as a lambda abstraction, must be polymorphic.
-Thus this is OK:
-
-<tscreen><verb>
-  case (True,False) of { (x::a, y) -> x }
-</verb></tscreen>
-
-Even though the context is that of a pair of booleans, 
-the alternative itself is polymorphic.  Of course, it is
-also OK to say:
-
-<tscreen><verb>
-  case (True,False) of { (x::Bool, y) -> x }
-</verb></tscreen>
-
-<item>
-To avoid ambiguity, the type after the ``@::@'' in a result
-pattern signature on a lambda or @case@ must be atomic (i.e. a single
-token or a parenthesised type of some sort).  To see why, 
-consider how one would parse this:
-
-<tscreen><verb>
-  \ x :: a -> b -> x
-</verb></tscreen>
-
-<item> Pattern type signatures that bind new type variables
-may not be used in pattern bindings at all.
-So this is illegal:
-
-<tscreen><verb>
-  f x = let (y, z::a) = x in ...
-</verb></tscreen>
-
-But these are OK, because they do not bind fresh type variables:
-
-<tscreen><verb>
-  f1 x            = let (y, z::Int) = x in ...
-  f2 (x::(Int,a)) = let (y, z::a)   = x in ...
-</verb></tscreen>
-
-However a single variable is considered a degenerate function binding,
-rather than a degerate pattern binding, so this is permitted, even
-though it binds a type variable:
-
-<tscreen><verb>
-  f :: (b->b) = \(x::b) -> x
-</verb></tscreen>
-
-</itemize>
-Such degnerate function bindings do not fall under the monomorphism
-restriction.  Thus:
-
-<tscreen><verb>
-  g :: a -> a -> Bool = \x y. x==y
-</verb></tscreen>
-
-Here @g@ has type @forall a. Eq a => a -> a -> Bool@, just as if
-@g@ had a separate type signature.  Lacking a type signature, @g@
-would get a monomorphic type.
-
-<sect2>Existentials
-<p>
-
-<itemize>
-<item> Pattern type signatures can bind existential type variables.
-For example:
-
-<tscreen><verb>
-  data T = forall a. MkT [a]
-
-  f :: T -> T
-  f (MkT [t::a]) = MkT t3
-		 where
-		   t3::[a] = [t,t,t]
-</verb></tscreen>
-
-</itemize>
-
-%-----------------------------------------------------------------------------
-<sect1>Pragmas
-<label id="pragmas">
-<p>
-
-GHC supports several pragmas, or instructions to the compiler placed
-in the source code.  Pragmas don't affect the meaning of the program,
-but they might affect the efficiency of the generated code.
-
-<sect2>INLINE pragma
-<label id="inline-pragma">
-<nidx>INLINE pragma</nidx>
-<nidx>pragma, INLINE</nidx>
-<p>
-
-GHC (with @-O@, as always) tries to inline (or ``unfold'')
-functions/values that are ``small enough,'' thus avoiding the call
-overhead and possibly exposing other more-wonderful optimisations.
-
-You will probably see these unfoldings (in Core syntax) in your
-interface files.
-
-Normally, if GHC decides a function is ``too expensive'' to inline, it
-will not do so, nor will it export that unfolding for other modules to
-use.
-
-The sledgehammer you can bring to bear is the
-@INLINE@<nidx>INLINE pragma</nidx> pragma, used thusly:
-<tscreen><verb>
-key_function :: Int -> String -> (Bool, Double) 
-
-#ifdef __GLASGOW_HASKELL__
-{-# INLINE key_function #-}
-#endif
-</verb></tscreen>
-(You don't need to do the C pre-processor carry-on unless you're going
-to stick the code through HBC---it doesn't like @INLINE@ pragmas.)
-
-The major effect of an @INLINE@ pragma is to declare a function's
-``cost'' to be very low.  The normal unfolding machinery will then be
-very keen to inline it.
-
-An @INLINE@ pragma for a function can be put anywhere its type
-signature could be put.
-
-@INLINE@ pragmas are a particularly good idea for the
-@then@/@return@ (or @bind@/@unit@) functions in a monad.
-For example, in GHC's own @UniqueSupply@ monad code, we have:
-<tscreen><verb>
-#ifdef __GLASGOW_HASKELL__
-{-# INLINE thenUs #-}
-{-# INLINE returnUs #-}
-#endif
-</verb></tscreen>
-
-<sect2>NOINLINE pragma
-<label id="noinline-pragma">
-<p>
-<nidx>NOINLINE pragma</nidx>
-<nidx>pragma, NOINLINE</nidx>
-
-The @NOINLINE@ pragma does exactly what you'd expect: it stops the
-named function from being inlined by the compiler.  You shouldn't ever
-need to do this, unless you're very cautious about code size.
-
-<sect2>SPECIALIZE pragma
-<label id="specialize-pragma">
-<p>
-<nidx>SPECIALIZE pragma</nidx>
-<nidx>pragma, SPECIALIZE</nidx>
-<nidx>overloading, death to</nidx>
-
-(UK spelling also accepted.)  For key overloaded functions, you can
-create extra versions (NB: more code space) specialised to particular
-types.  Thus, if you have an overloaded function:
-
-<tscreen><verb>
-hammeredLookup :: Ord key => [(key, value)] -> key -> value
-</verb></tscreen>
-
-If it is heavily used on lists with @Widget@ keys, you could
-specialise it as follows:
-<tscreen><verb>
-{-# SPECIALIZE hammeredLookup :: [(Widget, value)] -> Widget -> value #-}
-</verb></tscreen>
-
-To get very fancy, you can also specify a named function to use for
-the specialised value, by adding @= blah@, as in:
-<tscreen><verb>
-{-# SPECIALIZE hammeredLookup :: ...as before... = blah #-}
-</verb></tscreen>
-It's <em>Your Responsibility</em> to make sure that @blah@ really
-behaves as a specialised version of @hammeredLookup@!!!
-
-NOTE: the @=blah@ feature isn't implemented in GHC 4.xx.
-
-An example in which the @= blah@ form will Win Big:
-<tscreen><verb>
-toDouble :: Real a => a -> Double
-toDouble = fromRational . toRational
-
-{-# SPECIALIZE toDouble :: Int -> Double = i2d #-}
-i2d (I# i) = D# (int2Double# i) -- uses Glasgow prim-op directly
-</verb></tscreen>
-The @i2d@ function is virtually one machine instruction; the
-default conversion---via an intermediate @Rational@---is obscenely
-expensive by comparison.
-
-By using the US spelling, your @SPECIALIZE@ pragma will work with
-HBC, too.  Note that HBC doesn't support the @= blah@ form.
-
-A @SPECIALIZE@ pragma for a function can be put anywhere its type
-signature could be put.
-
-<sect2>SPECIALIZE instance pragma
-<label id="specialize-instance-pragma">
-<p>
-<nidx>SPECIALIZE pragma</nidx>
-<nidx>overloading, death to</nidx>
-Same idea, except for instance declarations.  For example:
-<tscreen><verb>
-instance (Eq a) => Eq (Foo a) where { ... usual stuff ... }
-
-{-# SPECIALIZE instance Eq (Foo [(Int, Bar)] #-}
-</verb></tscreen>
-Compatible with HBC, by the way.
-
-<sect2>LINE pragma
-<label id="line-pragma">
-<p>
-<nidx>LINE pragma</nidx>
-<nidx>pragma, LINE</nidx>
-
-This pragma is similar to C's @#line@ pragma, and is mainly for use in
-automatically generated Haskell code.  It lets you specify the line
-number and filename of the original code; for example
-
-<tscreen><verb>
-{-# LINE 42 "Foo.vhs" #-}
-</verb></tscreen>
-
-if you'd generated the current file from something called @Foo.vhs@
-and this line corresponds to line 42 in the original.  GHC will adjust
-its error messages to refer to the line/file named in the @LINE@
-pragma.
-
-<sect2>RULES pragma
-<p>
-The RULES pragma lets you specify rewrite rules.  It is described in
-Section <ref name="Rewrite Rules"
-id="rewrite-rules">.
-
-%-----------------------------------------------------------------------------
-<sect1>Rewrite rules
-<label id="rewrite-rules">
-<nidx>RULES pagma</nidx>
-<nidx>pragma, RULES</nidx>
-<nidx>rewrite rules</nidx>
-<p>
-
-The programmer can specify rewrite rules as part of the source program
-(in a pragma).  GHC applies these rewrite rules wherever it can.
-
-Here is an example:
-<tscreen><verb>
-  {-# RULES
-	"map/map"	forall f g xs. map f (map g xs) = map (f.g) xs
-  #-}
-</verb></tscreen>
-
-<sect2>Syntax
-<p>
-
-From a syntactic point of view:
-<itemize>
-<item> Each rule has a name, enclosed in double quotes.  The name itself has
-no significance at all.  It is only used when reporting how many times the rule fired.
-<item> There may be zero or more rules in a @RULES@ pragma.
-<item> Layout applies in a @RULES@ pragma.  Currently no new indentation level
-is set, so you must lay out your rules starting in the same column as the
-enclosing definitions.
-<item> Each variable mentioned in a rule must either be in scope (e.g. @map@),
-or bound by the @forall@ (e.g. @f@, @g@, @xs@).  The variables bound by
-the @forall@ are called the <em>pattern</em> variables.  They are separated
-by spaces, just like in a type @forall@.
-<item> A pattern variable may optionally have a type signature.
-If the type of the pattern variable is polymorphic, it <em>must</em> have a type signature.
-For example, here is the @foldr/build@ rule:
-<tscreen><verb>
-  "fold/build" 	forall k z (g::forall b. (a->b->b) -> b -> b) . 
-		foldr k z (build g) = g k z
-</verb></tscreen>
-Since @g@ has a polymorphic type, it must have a type signature.
-
-<item> The left hand side of a rule must consist of a top-level variable applied
-to arbitrary expressions.  For example, this is <em>not</em> OK:
-<tscreen><verb>
-  "wrong1"   forall e1 e2.  case True of { True -> e1; False -> e2 } = e1
-  "wrong2"   forall f.      f True = True
-</verb></tscreen>
-In @"wrong1"@, the LHS is not an application; in @"wrong1"@, the LHS has a pattern variable
-in the head.
-<item> A rule does not need to be in the same module as (any of) the
-variables it mentions, though of course they need to be in scope.
-<item> Rules are automatically exported from a module, just as instance declarations are.
-</itemize>
-
-<sect2>Semantics
-<p>
-
-From a semantic point of view:
-<itemize>
-<item> Rules are only applied if you use the @-O@ flag.
-
-<item> Rules are regarded as left-to-right rewrite rules.  
-When GHC finds an expression that is a substitution instance of the LHS
-of a rule, it replaces the expression by the (appropriately-substituted) RHS.
-By "a substitution instance" we mean that the LHS can be made equal to the 
-expression by substituting for the pattern variables.
-
-<item> The LHS and RHS of a rule are typechecked, and must have the
-same type.
-
-<item> GHC makes absolutely no attempt to verify that the LHS and RHS
-of a rule have the same meaning.  That is undecideable in general, and
-infeasible in most interesting cases.  The responsibility is entirely the programmer's!
-
-<item> GHC makes no attempt to make sure that the rules are confluent or
-terminating.  For example:
-<tscreen><verb>
-  "loop" 	forall x,y.  f x y = f y x
-</verb></tscreen>
-This rule will cause the compiler to go into an infinite loop.
-
-<item> If more than one rule matches a call, GHC will choose one arbitrarily to apply.
-
-<item> GHC currently uses a very simple, syntactic, matching algorithm
-for matching a rule LHS with an expression.  It seeks a substitution
-which makes the LHS and expression syntactically equal modulo alpha
-conversion.  The pattern (rule), but not the expression, is eta-expanded if 
-necessary.  (Eta-expanding the epression can lead to laziness bugs.)
-But not beta conversion (that's called higher-order matching).
-<p>
-Matching is carried out on GHC's intermediate language, which includes
-type abstractions and applications.  So a rule only matches if the
-types match too.  See Section <ref name="Specialisation" id="rule-spec"> below.
-
-<item> GHC keeps trying to apply the rules as it optimises the program.
-For example, consider:
-<tscreen><verb>
-  let s = map f
-      t = map g
-  in
-  s (t xs)
-</verb></tscreen>
-The expression @s (t xs)@ does not match the rule @"map/map"@, but GHC
-will substitute for @s@ and @t@, giving an expression which does match.
-If @s@ or @t@ was (a) used more than once, and (b) large or a redex, then it would
-not be substituted, and the rule would not fire.
-
-<item> In the earlier phases of compilation, GHC inlines <em>nothing
-that appears on the LHS of a rule</em>, because once you have substituted
-for something you can't match against it (given the simple minded 
-matching).  So if you write the rule
-<tscreen><verb>
-	"map/map" 	forall f,g.  map f . map g = map (f.g)
-</verb></tscreen>
-this <em>won't</em> match the expression @map f (map g xs)@.
-It will only match something written with explicit use of ".".  
-Well, not quite.  It <em>will</em> match the expression
-<tscreen><verb>
-	wibble f g xs
-</verb></tscreen>
-where @wibble@ is defined:
-<tscreen><verb>
-	wibble f g = map f . map g 
-</verb></tscreen>
-because @wibble@ will be inlined (it's small).
-
-Later on in compilation, GHC starts inlining even things on the
-LHS of rules, but still leaves the rules enabled.  This inlining
-policy is controlled by the per-simplification-pass flag @-finline-phase@n.
-
-<item> All rules are implicitly exported from the module, and are therefore
-in force in any module that imports the module that defined the rule, directly
-or indirectly.  (That is, if A imports B, which imports C, then C's rules are
-in force when compiling A.)  The situation is very similar to that for instance
-declarations.
-</itemize>
-
-<sect2>List fusion
-<p>
-
-The RULES mechanism is used to implement fusion (deforestation) of common list functions.
-If a "good consumer" consumes an intermediate list constructed by a "good producer", the 
-intermediate list should be eliminated entirely.
-<p>
-The following are good producers:
-<itemize>
-<item> List comprehensions
-<item> Enumerations of @Int@ and @Char@ (e.g. @['a'..'z']@).
-<item> Explicit lists (e.g. @[True, False]@)
-<item> The cons constructor (e.g @3:4:[]@)
-<item> @++@
-<item> @map@
-<item> @filter@
-<item> @iterate@, @repeat@
-<item> @zip@, @zipWith@
-</itemize>
-
-The following are good consumers:
-<itemize>
-<item> List comprehensions
-<item> @array@ (on its second argument)
-<item> @length@
-<item> @++@ (on its first argument)
-<item> @map@
-<item> @filter@
-<item> @concat@
-<item> @unzip@, @unzip2@, @unzip3@, @unzip4@
-<item> @zip@, @zipWith@ (but on one argument only; if both are good producers, @zip@
-will fuse with one but not the other)
-<item> @partition@
-<item> @head@
-<item> @and@, @or@, @any@, @all@
-<item> @sequence_@
-<item> @msum@
-<item> @sortBy@
-</itemize>
-
-So, for example, the following should generate no intermediate lists:
-<tscreen><verb>
-	array (1,10) [(i,i*i) | i <- map (+ 1) [0..9]]
-</verb></tscreen>
-
-This list could readily be extended; if there are Prelude functions that you use
-a lot which are not included, please tell us.
-<p>
-If you want to write your own good consumers or producers, look at the
-Prelude definitions of the above functions to see how to do so.
-
-<sect2>Specialisation
-<label id="rule-spec">
-<p>
-
-Rewrite rules can be used to get the same effect as a feature
-present in earlier version of GHC:
-<tscreen><verb>
-  {-# SPECIALIZE fromIntegral :: Int8 -> Int16 = int8ToInt16 #-}
-</verb></tscreen>
-This told GHC to use @int8ToInt16@ instead of @fromIntegral@ whenever
-the latter was called with type @Int8 -> Int16@.  That is, rather than
-specialising the original definition of @fromIntegral@ the programmer is
-promising that it is safe to use @int8ToInt16@ instead.
-
-This feature is no longer in GHC.  But rewrite rules let you do the
-same thing:
-<tscreen><verb>
-  {-# RULES
-    "fromIntegral/Int8/Int16" fromIntegral = int8ToInt16
-  #-}
-</verb></tscreen>
-This slightly odd-looking rule instructs GHC to replace @fromIntegral@
-by @int8ToInt16@ <em>whenever the types match</em>.  Speaking more operationally,
-GHC adds the type and dictionary applications to get the typed rule
-<tscreen><verb>
-	forall (d1::Integral Int8) (d2::Num Int16) .
-		fromIntegral Int8 Int16 d1 d2 = int8ToInt16
-</verb></tscreen>
-What is more,
-this rule does not need to be in the same file as fromIntegral,
-unlike the @SPECIALISE@ pragmas which currently do (so that they
-have an original definition available to specialise).
-
-<sect2>Controlling what's going on
-<p>
-
-<itemize>
-<item> Use @-ddump-rules@ to see what transformation rules GHC is using.
-<item> Use @-ddump-simpl-stats@ to see what rules are being fired.
-If you add @-dppr-debug@ you get a more detailed listing.
-<item> The defintion of (say) @build@ in @PrelBase.lhs@ looks llike this:
-<tscreen><verb>
-	build 	:: forall a. (forall b. (a -> b -> b) -> b -> b) -> [a]
-	{-# INLINE build #-}
-	build g = g (:) []
-</verb></tscreen>
-Notice the @INLINE@!  That prevents @(:)@ from being inlined when compiling
-@PrelBase@, so that an importing module will ``see'' the @(:)@, and can
-match it on the LHS of a rule.  @INLINE@ prevents any inlining happening
-in the RHS of the @INLINE@ thing.  I regret the delicacy of this.
-
-<item> In @ghc/lib/std/PrelBase.lhs@ look at the rules for @map@ to
-see how to write rules that will do fusion and yet give an efficient
-program even if fusion doesn't happen.  More rules in @PrelList.lhs@.
-</itemize>
-
-
-%-----------------------------------------------------------------------------
-<sect1>Pattern guards
-<label id="pattern-guards">
-<p>
-GHC supports the ``pattern-guards'' extension to 
-the guards that form part of Haskell function
-definitions.   The general aim is similar to that of views [1,2],
-but the expressive power of this proposal is a little different, in places
-more expressive than views, and in places less so.
-
-<sect2>What's the problem?
-<p>
-Consider the following Haskell function definition
-<tscreen><verb>
-  filter p []     	= []
-  filter p (y:ys) | p y = y : filter p ys
-  | otherwise = filter p ys
-</verb></tscreen>
-
-<p>The decision of which right-hand side to choose is made in
-two stages: first, pattern matching selects a guarded group,
-and second, the boolean-valued guards select among the right-hand
-sides of the group.  In these two stages, only the pattern-matching
-stage can bind variables.  A guard is simply a boolean valued expression.
-
-<p>So pattern-matching combines selection with binding, whereas guards simply
-perform selection.  Sometimes this is a tremendous nuisance.  For example,
-suppose we have an abstract data type of finite maps, with a lookup
-operation:
-<tscreen><verb>
-  lookup :: FinteMap -> Int -> Maybe Int
-</verb></tscreen>
-
-<p>The lookup returns Nothing if the supplied key is not in the
-domain of the mapping, and (Just v) otherwise, where v is
-the value that the key maps to.  Now consider the following
-definition:
-<tscreen><verb>
-   clunky env var1 var2 | ok1 && ok2 = val1 + val2
-  			| otherwise  = var1 + var2
-     where
-        m1   = lookup env var1
-        m2   = lookup env var2
-        ok1  = maybeToBool m1
-        ok2  = maybeToBool m2
-        val1 = expectJust m1
-        val2 = expectJust m2
-</verb></tscreen>
-The auxiliary functions are
-<tscreen><verb>
-  maybeToBool :: Maybe a -> Bool
-  maybeToBool (Just x) = True
-  maybeToBool Nothing  = False
-  
-  expectJust :: Maybe a -> a
-  expectJust (Just x) = x
-  expectJust Nothing  = error "Unexpected Nothing"
-</verb></tscreen>
-<p>What is <tt>clunky</tt> doing?  The guard <tt>ok1 && ok2</tt> checks that both
-lookups succeed, using <tt>maybeToBool</tt> to convert the maybe types to
-booleans.  The (lazily evaluated) <tt>expectJust</tt> calls extract the values
-from the results of the lookups, and binds the returned values to
-<tt>val1</tt> and <tt>val2</tt> respectively.  If either lookup fails, then <tt>clunky</tt>
-takes the <tt>otherwise</tt> case and returns the sum of its arguments.
-
-<p>This is certainly legal Haskell, but it is a tremendously verbose
-and un-obvious way to achieve the desired effect.  Arguably, a more
-direct way to write <tt>clunky</tt> would be to use case expressions:
-<tscreen><verb>
-  clunky env var1 var1  = case lookup env var1 of
-			    Nothing -> fail
-			    Just val1 -> case lookup env var2 of
-					   Nothing -> fail
-					   Just val2 -> val1 + val2
-			where
-			  fail = val1 + val2
-</verb></tscreen>
-<p>This is a bit shorter, but hardly better.  Of course, we can rewrite
-any set of pattern-matching, guarded equations as case expressions;
-that is precisely what the compiler does when compiling equations!
-The reason that Haskell provides guarded equations is because they
-allow us to write down the cases we want to consider, one at a time,
-independently of each other.  This structure is hidden in the case
-version.  Two of the right-hand sides are really the same (<tt>fail</tt>),
-and the whole expression tends to become more and more indented. 
-
-<p>Worse, if this was just one equation of <tt>clunky</tt>, with others that
-follow, then the thing wouldn't work at all.  That is, suppose we have
-<tscreen><verb>
-  clunky' env (var1:var2:vars) | ok1 && ok2 = val1 + val2
-	where
-	  m1 = lookup env var1
-	  ...as before...
-
-  clunky' env [var1] = ...some stuff...
-  clunky' env []     = ...more stuff...
-</verb></tscreen>
-Now, if either the lookups fail we want to fall through to the second
-and third equations for <tt>clunky'</tt>.  If we write the definition in the
-form of a case expression we are forced to make the latter two
-equations for <tt>clunky'</tt> into a separate definition and call it in
-the right hand side of <tt>fail</tt>.  Ugh.  Ugh.  Ugh.  This is precisely
-why Haskell provides guards at all, rather than relying on if-then-else
-expressions: if the guard fails we fall through to the next equation,
-whereas we can't do that with a conditional.
-
-
-<p>What is frustrating about this is that the solution is so tantalisingly
-near at hand!  What we want to do is to pattern-match on the result of
-the lookup.  We can do it like this:
-<tscreen><verb>
-  clunky' env vars@(var1:var2:vars)
-    = clunky_help (lookup env var1) (lookup env var2) vars
-    where
-      clunky_help (Just val1) (Just val2) vars   = val1 + val2
-      clunky_help _           _           [var1] = ...some stuff...
-      clunky_help _           _           []     = ...more stuff...
-</verb></tscreen>
-<p>Now we do get three equations, one for each right-hand side, but
-it is still clunky.  In a big set of equations it becomes hard to
-remember what each <tt>Just</tt> pattern corresponds to.  Worse, we can't
-use one lookup in the next.  For example, suppose our function was
-like this:
-<tscreen><verb>
-  clunky'' env var1 var2
-	 | ok1 && ok2 = val2
-         | otherwise  = var1 + var2
-         where
-	     m1 = lookup env var1
-	     m2 = lookup env (var2 + val1)
-	     ok1 = maybeToBool m1
-	     ok2 = maybeToBool m2
-	     val1 = expectJust m1
-	     val2 = expectJust m2
-</verb></tscreen>
-<p>Notice that the second lookup uses val1, the result of the first lookup.
-To express this with a <tt>clunky_help</tt> function requires a second helper
-function nested inside the first.  Dire stuff.
-
-<p>So the original definition, using <tt>maybeToBool</tt> and <tt>expectJust</tt> has the
-merit that it scales nicely, to accommodate both multiple equations
-and successive lookups.  Yet it stinks.
-
-
-<sect2>The pattern guards extension
-<p>
-The extension that GHC implements is simple: 
-<em>instead of being a boolean expression,
-a guard is a list of qualifiers,
-exactly as in a list comprehension</em>.
-
-<p>That is, the only syntax change is to replace
-<em>exp</em> by <em>quals</em> in the syntax of guarded equations.
-
-<p>Here is how you can now write <tt>clunky</tt>:
-<tscreen><verb>
-  clunky env var1 var1
-    | Just val1 <- lookup env var1
-    , Just val2 <- lookup env var2
-    = val1 + val2
-  ...other equations for clunky...
-</verb></tscreen>
-<p>The semantics should be clear enough.  The qualifers are matched in
-order.  For a <tt><-</tt> qualifier, which I call a <em>pattern guard</em>, the
-right hand side is evaluated and matched against the pattern on the
-left.  If the match fails then the whole guard fails and the next
-equation is tried.  If it succeeds, then the appropriate binding takes
-place, and the next qualifier is matched, in the augmented
-environment.  Unlike list comprehensions, however, the type of the
-expression to the right of the <tt><-</tt> is the same as the type of the
-pattern to its left.  The bindings introduced by pattern guards scope
-over all the remaining guard qualifiers, and over the right hand side
-of the equation.
-
-<p>Just as with list comprehensions, boolean expressions can be freely mixed
-with among the pattern guards.  For example:
-<tscreen><verb>
-  f x | [y] <- x
-      , y > 3
-      , Just z <- h y
-      = ...
-</verb></tscreen>
-<p>Haskell's current guards therefore emerge as a special case, in which the
-qualifier list has just one element, a boolean expression.
-
-<p>Just as with list comprehensions, a <tt>let</tt> qualifier can introduce a binding.
-It is also possible to do this with pattern guard with a simple
-variable pattern <tt>a <- e</tt>
-However a <tt>let</tt> qualifier is a little more powerful, because it can
-introduce a recursive or mutually-recursive binding.  It is not clear
-whether this power is particularly useful, but it seems more uniform to
-have exactly the same syntax as list comprehensions.
-
-<p>One could argue that the notation <tt><-</tt> is misleading, suggesting
-the idea of <em>drawn from</em> as in a list comprehension.  But it's very
-nice to reuse precisely the list-comprehension syntax.  Furthermore,
-the only viable alternative is <tt>=</tt>, and that would lead to parsing
-difficulties, because we rely on the <tt>=</tt> to herald the arrival of
-the right-hand side of the equation.  Consider <tt>f x | y = h x = 3</tt>.
-
-<sect2>Views
-
-<p>One very useful application of pattern guards is to abstract data types.
-Given an abstract data type it's quite common to have conditional
-selectors.  For example:
-<tscreen><verb>
-  addressMaybe :: Person -> Maybe String
-</verb></tscreen>
-<p>The function <tt>addressMaybe</tt> extracts a string from the abstract data type
-<tt>Person</tt>, but returns <tt>Nothing</tt> if the person has no address.  Inside
-GHC we have lots of functions like:
-<tscreen><verb>
-  getFunTyMaybe :: Type -> Maybe (Type,Type)
-</verb></tscreen>
-<p>This returns <tt>Nothing</tt> if the argument is not a function type, and
-<tt>(Just arg_ty res_ty)</tt> if the argument is a function type.  The data
-type <tt>Type</tt> is abstract.
-
-<p>Since <tt>Type</tt> and <tt>Person</tt> are abstract we can't pattern-match on them,
-but it's really nice to be able to say:
-<tscreen><verb>
-  f person | Just address <- addressMaybe person
-    = ...
-    | otherwise
-    = ...
-</verb></tscreen>
-<p>Thus, pattern guards can be seen as addressing a similar goal to
-that of views, namely reconciling pattern matching with data abstraction.
-Views were proposed by Wadler ages ago [1], and are the subject of a
-recent concrete proposal for a Haskell language extension [2].
-
-<p>It is natural to ask whether views subsume pattern guards or vice versa.
-The answer is "neither".
-
-<sect3>Do views subsume pattern guards?
-
-<p>The views proposal [2] points out that you can use views to simulate
-(some) guards and, as we saw above, views have similar purpose and
-functionality to at least some applications of pattern guards.
-
-<p>However, views give a view on a <em>single</em> value, whereas guards allow
-arbitrary function calls to combine in-scope values.  For example,
-<tt>clunky</tt> matches <tt>(Just val1)</tt> against <tt>(lookup env var1)</tt>. We do not want a
-view of <tt>env</tt> nor of <tt>var1</tt> but rather of their combination by
-<tt>lookup</tt>.  Views simply do not help with <tt>clunky</tt>.
-
-<p>Views are capable of dealing with the data abstraction issue of
-course.  However, each conditional selector (such as <tt>getFunTyMaybe</tt>)
-would require its own view, complete with its own viewtype:
-<tscreen><verb>
-  view FunType of Type  = FunType Type Type
-  			| NotFunType
-	  where
-	    funType (Fun arg res) = FunType arg res
-	    funType other_type    = NotFunType
-</verb></tscreen>
-This seems a bit heavyweight (three new names instead of one)
-compared with
-<tscreen><verb>
-  getFunTypeMaybe (Fun arg res) = Just (arg,res)
-  getFunTypeMaybe other_type    = Nothing
-</verb></tscreen>
-<p>Here we can re-use the existing <tt>Maybe</tt> type.  Not only does this
-save defining new types, but it allows the existing library of
-functions on <tt>Maybe</tt> types to be applied directly to the result
-of <tt>getFunTypeMaybe</tt>.
-
-<p>Just to put this point another way, suppose we had a function
-<tscreen><verb>
-  tyvarsOf :: Type -> [TyVar]
-</verb></tscreen>
-that returns the free type variables of a type. 
-Would anyone suggest that we make this into a view of <tt>Type</tt>?
-<tscreen><verb>
-  view TyVarsOf of Type = TyVarsOf [TyVar]
-  			where
-			  tyVarsOf ty = ...
-</verb></tscreen>
-Now we could write
-<tscreen><verb>
-  f :: Type -> Int
-  f (TyVarsOf tyvars) = length tyvars
-</verb></tscreen>
-instead of
-<tscreen><verb>
-  f :: Type -> Int
-  f ty = length (tyvarsOf ty)
-</verb></tscreen>
-Surely not!  So why do so just because the value returned is a <tt>Maybe</tt> type?
-
-<sect3>Do pattern guards subsume views?
-
-<p>There are two ways in which views might be desired even if you
-had pattern guards:<p>
-<itemize>
-<item>
-We might prefer to write (using views)
-<tscreen><verb>
-  addCpx (Rect r1 i1) (Rect r1 i2) = rect (r1+r2) (c1+c2)
-</verb></tscreen>
-rather than (using pattern guards)
-<tscreen><verb>
-  addCpx c1 c2
-    | Rect r1 i1 <- getRect c1
-    , Rect r1 i2 <- getRect c2
-    = mkRect (r1+r2) (c1+c2)
-</verb></tscreen>(One might argue, though, that the latter accurately indicates that there may be some work involved in matching against a view, compared to ordinary pattern matching.)
-</item>
-<item>
-The pattern-guard notation gets a bit more clunky if we want a view that has more than one information-carrying constructor. For example, consider the following view:
-<tscreen><verb>
-  view AbsInt of Int = Pos Int | Neg Int
-    where
-      absInt n = if n>=0 then Pos n else Neg (-n)
-</verb></tscreen>
-Here the view returns a Pos or Neg constructor, each of which contains the absolute value of the original Int.  Now we can say
-<tscreen><verb>
-  f (Pos n) = n+1
-  f (Neg n) = n-1
-</verb></tscreen>
-Then <tt>f 4 = 5</tt>, <tt>f (-3) = -4</tt>.
-
-Without views, but with pattern guards, we could write this:
-<tscreen><verb>
-  data AbsInt = Pos Int | Neg Int
-  absInt n = if n>=0 then Pos n else Neg n
-
-  f n | Pos n' <- abs_n = n'+1
-      | Neg n' <- abs_n = n'-1
-      where
-        abs_n = absInt n
-</verb></tscreen>
-<p>Here we've used a where clause to ensure that <tt>absInt</tt> is only called once (though we could instead duplicate the call to <tt>absInt</tt> and hope the compile spots the common subexpression). 
-
-<p>The view version is undoubtedly more compact. (Again, one might wonder, though, whether it perhaps conceals too much.)
-</item>
-<item>
-When nested pattern guards are used, though, the use of a where clause fails.  For example, consider the following silly function using the <tt>AbsInt</tt> view
-<tscreen><verb>
-  g (Pos (Pos n)) = n+1
-  g (Pos (Neg n)) = n-1 -- A bit silly
-</verb></tscreen>
-Without views we have to write
-<tscreen><verb>
-  g n | n1 <- abs_n
-      , Pos n2 <- absInt n1
-      = n2+1
-      | Pos n1 <- abs_n
-      , Neg n2 <- absInt n1
-      = n2-1
-      where
-        abs_n = absInt n
-</verb></tscreen>
-<p>We can share the first call to <tt>absInt</tt> but not the second.  This is a compilation issue.  Just as we might hope that the compiler would spot the common sub-expression if we replaced <tt>abs_n by (absInt n)</tt>, so we might hope that it would optimise the second.
-The views optimisation seems more simple to spot, somehow.
-</item>
-</itemize>
-
-<sect3>Views --- summary
-<p>
-My gut feel at the moment is that the pattern-guard proposal
-<itemize>
-<item>is much simpler to specify and implement than views
-<item> gets some expressiveness that is simply inaccessible to views.
-<item>successfully reconciles pattern matching with data abstraction,
-albeit with a slightly less compact notation than views --
-but the extra notation carries useful clues
-<item>is less heavyweight to use when defining many information
-extraction functions over an ADT
-</itemize>
-So I think the case for pattern guards is stronger than that for views,
-and (if implemented) reduces, without eliminating, the need for views.
-
-<sect2>Argument evaluation order
-
-<p>Haskell specifies that patterns are evaluated left to right.  Thus
-<tscreen><verb>
-  f (x:xs) (y:ys) = ...
-  f xs     ys     = ...
-</verb></tscreen>
-Here, the first argument is evaluated and matched against <tt>(x:xs)</tt> and
-then the second argument is evaluated and matched against <tt>(y:ys)</tt>.
-If you want to match the second argument first --- a significant change
-since it changes the semantics of the function --- you are out of luck.
-You must either change the order of the arguments, or use case expressions
-instead.
-
-<p>With pattern guards you can say what you want, without changing the
-argument order:
-<tscreen><verb>
-  f xs ys | (y:ys) <- ys
-	    (x:xs) <- xs
-	  = ...
-  f xs ys = ...
-</verb></tscreen>
-(Since a pattern guard is a non recursive binding I have shadowed
-xs and ys, just to remind us that it's OK to do so.)
-
-<p>I can't say that this is a very important feature in practice, but
-it's worth noting.
-
-<sect2>References
-
-<p>[1] P Wadler, "Views: a way for pattern matching to cohabit with
-data abstraction", POPL 14 (1987), 307-313
-
-<p>[2] W Burton, E Meijer, P Sansom, S Thompson, P Wadler, "A (sic) extension
-to Haskell 1.3 for views", sent to the Haskell mailing list
-23 Oct 1996
diff --git a/ghc/docs/users_guide/gone_wrong.vsgml b/ghc/docs/users_guide/gone_wrong.vsgml
deleted file mode 100644
index df05693..0000000
--- a/ghc/docs/users_guide/gone_wrong.vsgml
+++ /dev/null
@@ -1,291 +0,0 @@
-%************************************************************************
-%*                                                                      *
-<sect>What to do when something goes wrong
-<label id="wrong">
-<p>
-<nidx>problems</nidx>
-%*                                                                      *
-%************************************************************************
-
-If you still have a problem after consulting this section, then you
-may have found a <em>bug</em>---please report it!  See Section <ref
-name="How to report a bug in the GHC system" id="bug-reports"> for a
-list of things we'd like to know about your bug.  If in doubt, send a
-report---we love mail from irate users :-!
-
-(Section <ref name="Haskell 98 vs. Glasgow Haskell: language
-non-compliance" id="vs-Haskell-defn">, which describes Glasgow
-Haskell's shortcomings vs.~the Haskell language definition, may also
-be of interest.)
-
-%************************************************************************
-%*                                                                      *
-<sect1>When the compiler ``does the wrong thing''
-<label id="wrong-compiler">
-<p>
-<nidx>compiler problems</nidx>
-<nidx>problems with the compiler</nidx>
-%*                                                                      *
-%************************************************************************
-
-<descrip>
-%-------------------------------------------------------------------
-<tag>``Help! The compiler crashed (or `panic'd)!''</tag>
-These events are <em>always</em> bugs in the GHC system---please report
-them.
-
-%-------------------------------------------------------------------
-<tag>``The compiler ran out of heap (or stack) when compiling itself!''</tag>
-It happens.  We try to supply reasonable @-H<n>@ flags for
-@ghc/compiler/@ and @ghc/lib/@, but GHC's memory consumption
-can vary by platform (e.g., on a 64-bit machine).
-
-Just say @make all EXTRA_HC_OPTS=-H<a reasonable number>@ and see
-how you get along.
-
-Note that this is less likely to happen if you are compiling with GHC
-4.00 or later, since the introduction of the dynamically expanding
-heap.
-
-%-------------------------------------------------------------------
-<tag>``The compiler died with a pattern-matching error.''</tag>
-This is a bug just as surely as a ``panic.'' Please report it.
-
-%-------------------------------------------------------------------
-<tag>``This is a terrible error message.''</tag>
-If you think that GHC could have produced a better error message,
-please report it as a bug.
-
-%-------------------------------------------------------------------
-<tag>``What about these `trace' messages from GHC?''</tag>
-Almost surely not a problem.  About some specific cases...
-<descrip>
-<tag>Simplifier still going after N iterations:</tag>
-Sad, but harmless.  You can change the number with a
-@-fmax-simplifier-iterations<N>@<nidx>-fmax-simplifier-iterations&lt;N&gt; option</nidx> option (no space);
-and you can see what actions took place in each iteration by
-turning on the @-fshow-simplifier-progress@
-<nidx>-fshow-simplifier-progress option</nidx> option.
-
-If the simplifier definitely seems to be ``looping,'' please report
-it.
-</descrip>
-
-%-------------------------------------------------------------------
-<tag>``What about this warning from the C compiler?''</tag>
-
-For example: ``...warning: `Foo' declared `static' but never defined.''
-Unsightly, but shouldn't be a problem.
-
-%-------------------------------------------------------------------
-<tag>Sensitivity to @.hi@ interface files:</tag>
-
-GHC is very sensitive about interface files.  For example, if it picks
-up a non-standard @Prelude.hi@ file, pretty terrible things will
-happen.  If you turn on
-@-fno-implicit-prelude@<nidx>-fno-implicit-prelude option</nidx>, the
-compiler will almost surely die, unless you know what you are doing.
-
-Furthermore, as sketched below, you may have big problems
-running programs compiled using unstable interfaces.
-
-%-------------------------------------------------------------------
-<tag>``I think GHC is producing incorrect code'':</tag>
-
-Unlikely :-) A useful be-more-paranoid option to give to GHC is
-@-dcore-lint@<nidx>-dcore-lint option</nidx>; this causes a ``lint''
-pass to check for errors (notably type errors) after each Core-to-Core
-transformation pass.  We run with @-dcore-lint@ on all the time; it
-costs about 5\% in compile time.
-
-%-------------------------------------------------------------------
-<tag>``Why did I get a link error?''</tag>
-
-If the linker complains about not finding @_<something>_fast@, then
-something is inconsistent: you probably didn't compile modules in the
-proper dependency order.
-
-%-------------------------------------------------------------------
-<tag>``What's a `consistency error'?''</tag>
-(These are reported just after linking your program.)
-
-You tried to link incompatible object files, e.g., normal ones
-(registerised, Appel garbage-collector) with profiling ones (two-space
-collector).  Or those compiled by a previous version of GHC
-with an incompatible newer version.
-
-If you run @nm -o *.o | egrep 't (cc|hsc)\.'@ (or, on
-unregisterised files: @what *.o@), you'll see all the consistency
-tags/strings in your object files.  They must all be the same!
-(ToDo: tell you what they mean...)
-
-%-------------------------------------------------------------------
-<tag>``Is this line number right?''</tag>
-On this score, GHC usually does pretty well, especially
-if you ``allow'' it to be off by one or two.  In the case of an
-instance or class declaration, the line number
-may only point you to the declaration, not to a specific method.
-
-Please report line-number errors that you find particularly unhelpful.
-</descrip>
-
-%************************************************************************
-%*                                                                      *
-<sect1>When your program ``does the wrong thing''
-<label id="wrong-compilee">
-<p>
-<nidx>problems running your program</nidx>
-%*                                                                      *
-%************************************************************************
-
-(For advice about overly slow or memory-hungry Haskell programs,
-please see Section <ref name="Advice on: sooner, faster, smaller,
-stingier" id="sooner-faster-quicker">).
-
-<descrip>
-%-----------------------------------------------------------------------
-<tag>``Help! My program crashed!''</tag>
-(e.g., a `segmentation fault' or `core dumped')
-<nidx>segmentation fault</nidx>
-
-If your program has no @_ccall_@s/@_casm_@s in it, then a crash is
-always a BUG in the GHC system, except in one case: If your program is
-made of several modules, each module must have been compiled after any
-modules on which it depends (unless you use @.hi-boot@ files, in which
-case these <em/must/ be correct with respect to the module source). 
-
-For example, if an interface is lying about the type of an imported
-value then GHC may well generate duff code for the importing module.
-<em>This applies to pragmas inside interfaces too!</em>  If the pragma is
-lying (e.g., about the ``arity'' of a value), then duff code may result.
-Furthermore, arities may change even if types do not.
-
-In short, if you compile a module and its interface changes, then all
-the modules that import that interface <em>must</em> be re-compiled.
-
-A useful option to alert you when interfaces change is
-@-hi-diffs@<nidx>-hi-diffs option</nidx>.  It will run @diff@ on the
-changed interface file, before and after, when applicable.
-
-If you are using @make@, a useful tool to make sure that every module
-<em>is</em> up-to-date with respect to its imported interfaces is
-@mkdependHS@ (which comes with GHC).  Please see Section <ref
-name="Makefile dependencies in Haskell: using mkdependHS"
-id="mkdependHS">.
-
-If you are down to your last-compile-before-a-bug-report, we would
-recommend that you add a @-dcore-lint@ option (for extra checking) to
-your compilation options.
-
-So, before you report a bug because of a core dump, you should probably:
-<tscreen><verb>
-% rm *.o        # scrub your object files
-% make my_prog  # re-make your program; use -hi-diffs to highlight changes;
-		# as mentioned above, use -dcore-lint to be more paranoid
-% ./my_prog ... # retry...
-</verb></tscreen>
-
-Of course, if you have @_ccall_@s/@_casm_@s in your program then all
-bets are off, because you can trash the heap, the stack, or whatever.
-
-If you are interested in hard-core debugging of a crashing
-GHC-compiled program, please see Section <ref name="Hard-core
-debugging of GHC-compiled programs" id="hard-core-debug">.
-
-%-------------------------------------------------------------------
-<tag>``My program entered an `absent' argument.''</tag>
-This is definitely caused by a bug in GHC. Please report it.
-
-%-----------------------------------------------------------------------
-<tag>``What's with this `arithmetic (or `floating') exception' ''?</tag>
-
-@Int@, @Float@, and @Double@ arithmetic is <em>unchecked</em>.
-Overflows, underflows and loss of precision are either silent or
-reported as an exception by the operating system (depending on the
-architecture).  Divide-by-zero <em>may</em> cause an untrapped
-exception (please report it if it does).
-
-</descrip>
-
-%************************************************************************
-%*                                                                      *
-<sect1>How to report a bug in the GHC system
-<label id="bug-reports">
-<p>
-<nidx>bug reports</nidx>
-%*                                                                      *
-%************************************************************************
-
-Glasgow Haskell is a changing system so there are sure to be bugs in
-it.  Please report them to <htmlurl
-name="glasgow-haskell-bugs@@haskell.org"
-url="mailto:glasgow-haskell-bugs@@haskell.org">!  (However, please
-check the earlier part of this section to be sure it's not a known
-not-really-a problem.)
-
-The name of the bug-reporting game is: facts, facts, facts.
-Don't omit them because ``Oh, they won't be interested...''
-
-<enum>
-
-<item> What kind of machine are you running on, and exactly what
-version of the operating system are you using? (@uname -a@ or @cat
-/etc/motd@ will show the desired information.)
-
-<item> What version of GCC are you using? @gcc -v@ will tell you.
-
-<item> Run the sequence of compiles/runs that caused the offending
-behaviour, capturing all the input/output in a ``script'' (a UNIX
-command) or in an Emacs shell window.  We'd prefer to see the whole
-thing.
-
-<item> Be sure any Haskell compilations are run with a @-v@ (verbose)
-flag, so we can see exactly what was run, what versions of things you
-have, etc.
-
-<item> What is the program behaviour that is wrong, in your opinion?
-
-<item> If practical, please send enough source files/interface files
-for us to duplicate the problem.
-
-<item> If you are a Hero and track down the problem in the
-compilation-system sources, please send us patches relative to a known
-released version of GHC, or whole files if you prefer.
-
-</enum>
-
-%************************************************************************
-%*                                                                      *
-<sect1>Hard-core debugging of GHC-compiled programs
-<label id="hard-core-debug">
-<p>
-<nidx>debugging, hard-core</nidx>
-%*                                                                      *
-%************************************************************************
-
-If your program is crashing, you should almost surely file a bug
-report, as outlined in previous sections.
-
-This section suggests ways to Make Further Progress Anyway.
-
-The first thing to establish is: Is it a garbage-collection (GC) bug?
-Try your program with a very large heap and a @-Sstderr@ RTS
-flag.
-<itemize>
-<item>
-If it crashes <em>without</em> garbage-collecting, then it is
-definitely <em>not</em> a GC bug.
-<item>
-If you can make it crash with one heap size but not with another, then
-it <em>probably is</em> a GC bug.
-<item>
-If it crashes with the normal
-collector, but not when you force two-space collection (@-F2s@
-runtime flag), then it <em>probably is</em> a GC bug.
-</itemize>
-
-If it <em>is</em> a GC bug, you may be able to avoid it by using a
-particular heap size or by using a @-F2s@ runtime flag.  (But don't
-forget to report the bug!!!)
-
-ToDo: more here?
diff --git a/ghc/docs/users_guide/intro.vsgml b/ghc/docs/users_guide/intro.vsgml
deleted file mode 100644
index ce1ad3b..0000000
--- a/ghc/docs/users_guide/intro.vsgml
+++ /dev/null
@@ -1,239 +0,0 @@
-<sect>Introduction to GHC
-<label id="introduction-GHC">
-<p>
-
-This is a guide to using the Glasgow Haskell compilation (GHC) system.
-It is a batch compiler for the Haskell~98 language, with support for
-various Glasgow-only extensions.
-In this document, we assume that GHC has been installed at your site
-as @ghc@.  A separate document, ``Building and Installing the 
-Glasgow Functional Programming Tools Suite'',
-describes how to install @ghc@.
-
-Many people will use GHC very simply: compile some
-modules---@ghc -c -O Foo.hs Bar.hs@; and link them---
-@ghc -o wiggle -O Foo.o Bar.o@.
-
-But if you need to do something more complicated, GHC can do that,
-too:
-<tscreen><verb>
-ghc -c -O -fno-foldr-build -dcore-lint -fvia-C -ddump-simpl Foo.lhs
-</verb></tscreen>
-Stay tuned---all will be revealed!
-
-The rest of this section provide some tutorial information
-on batch-style compilation; if you're familiar with these concepts
-already, then feel free to skip to the next section.
-
-%************************************************************************
-%*                                                                      *
-<sect1>The (batch) compilation system components
-<label id="batch-system-parts">
-<p>
-%*                                                                      *
-%************************************************************************
-
-The Glorious Haskell Compilation System, as with most UNIX (batch)
-compilation systems, has several interacting parts:
-<enum>
-<item>
-A <em>driver</em><nidx>driver program</nidx> @ghc@<nidx>ghc</nidx>---which you
-usually think of as ``the compiler''---is a program that merely
-invokes/glues-together the other pieces of the system (listed below),
-passing the right options to each, slurping in the right libraries,
-etc.
-
-<item>
-A <em>literate pre-processor</em>
-<nidx>literate pre-processor</nidx>
-<nidx>pre-processor, literate</nidx>
-@unlit@<nidx>unlit</nidx> that extracts Haskell
-code from a literate script; used if you believe in that sort of
-thing.
-
-<item>
-The <em>Haskellised C pre-processor</em>
-<nidx>Haskellised C pre-processor</nidx>
-<nidx>C pre-processor, Haskellised</nidx>
-<nidx>pre-processor, Haskellised C</nidx>
-@hscpp@,<nidx>hscpp</nidx> only needed by people requiring conditional
-compilation, probably for large systems.  The ``Haskellised'' part
-just means that @#line@ directives in the output have been
-converted into proper Haskell @{-# LINE ... -@} pragmas.
-
-You must give an explicit @-cpp@ option 
-<nidx>-cpp option</nidx> for the C pre-processor to be invoked.
-
-<item>
-The <em>Haskell compiler</em>
-<nidx>Haskell compiler</nidx>
-<nidx>compiler, Haskell</nidx>
-@hsc@,<nidx>hsc</nidx>
-which---in normal use---takes its input from the C pre-processor
-and produces assembly-language output (sometimes: ANSI C output).
-
-<item>
-The <em>ANSI~C Haskell high-level assembler :-)</em>
-<nidx>ANSI C compiler</nidx>
-<nidx>high-level assembler</nidx>
-<nidx>assembler, high-level</nidx>
-
-compiles @hsc@'s C output into assembly language for a particular
-target architecture.  In fact, the only C compiler we currently
-support is <tt/gcc/, because we make use of certain extensions to the
-C language only supported by gcc.  Version 2.x is a must; we recommend
-version 2.7.2.1 for stability (we've heard both good and bad reports
-of later versions).
-
-<item>
-The <em>assembler</em><nidx>assembler</nidx>---a standard UNIX one, probably
-@as@<nidx>as</nidx>.
-
-<item>
-The <em>linker</em><nidx>linker</nidx>---a standard UNIX one, probably
-@ld@.<nidx>ld</nidx>
-
-<item>
-A <em>runtime system</em>,<nidx>runtime system</nidx> including (most notably)
-a storage manager; the linker links in the code for this.
-
-<item>
-The <em>Haskell standard prelude</em><nidx>standard prelude</nidx>, a
-large library of standard functions, is linked in as well.
-
-<item>
-Parts of other <em>installed libraries</em> that you have at your site
-may be linked in also.
-</enum>
-
-%************************************************************************
-%*                                                                      *
-<sect1>What really happens when I ``compile'' a Haskell program?
-<label id="compile-what-really-happens">
-<p>
-%*                                                                      *
-%************************************************************************
-
-You invoke the Glasgow Haskell compilation system through the
-driver program @ghc@.<nidx>ghc</nidx> For example, if you had typed a
-literate ``Hello, world!'' program into @hello.lhs@, and you then
-invoked:
-<tscreen><verb>
-ghc hello.lhs
-</verb></tscreen>
-
-the following would happen:
-<enum>
-<item>
-The file @hello.lhs@ is run through the literate-program
-code extractor @unlit@<nidx>unlit</nidx>, feeding its output to
-
-<item>
-The Haskell compiler proper @hsc@<nidx>hsc</nidx>, which produces
-input for
-
-<item>
-The assembler (or that ubiquitous ``high-level assembler,'' a C
-compiler), which produces an object file and passes it to
-
-<item>
-The linker, which links your code with the appropriate libraries
-(including the standard prelude), producing an executable program in
-the default output file named @a.out@.
-</enum>
-
-You have considerable control over the compilation process.  You feed
-command-line arguments (call them ``options,'' for short) to the
-driver, @ghc@; the ``types'' of the input files (as encoded in
-their names' suffixes) also matter.
-
-Here's hoping this is enough background so that you can read the rest
-of this guide!
-
-% The ``style'' of the driver program @ghc@ follows that of the GNU C
-% compiler driver @gcc@.  The use of environment variables to provide
-% defaults is more extensive in this compilation system.
-
-%--------------------------------------------------------------------
-<sect1>Meta-information: Web sites, mailing lists, etc.
-<label id="mailing-lists-GHC">
-<p>
-<nidx>mailing lists, Glasgow Haskell</nidx>
-<nidx>Glasgow Haskell mailing lists</nidx>
-
-On the World-Wide Web, there are several URLs of likely interest:
-
-<itemize>
-<item>  <url name="Haskell home page" url="http://www.haskell.org/">
-<item>  <url name="GHC home page"     url="http://www.haskell.org/ghc/">
-<item>  <url name="Glasgow FP group page" url="http://www.dcs.gla.ac.uk/fp/">
-<item>  <url name="comp.lang.functional FAQ" url="http://www.cs.nott.ac.uk/Department/Staff/mpj/faq.html">
-</itemize>
-
-We run two mailing lists about Glasgow Haskell.  We encourage you to
-join, as you feel is appropriate.
-
-<descrip>
-
-<tag>glasgow-haskell-users:</tag>
-
-This list is for GHC users to chat among themselves.  Subscribe by
-sending mail to <htmlurl name="majordomo@@haskell.org"
-url="mailto:majordomo@@haskell.org">, with a message body (not
-header) like this:
-
-<tscreen><verb> 
-subscribe glasgow-haskell-users MyName <m.y.self@@bigbucks.com> 
-</verb></tscreen> 
-
-(The last bit is your all-important e-mail address, of course.)
-
-To communicate with your fellow users, send mail to <url
-name="glasgow-haskell-users@@haskell.org"
-url="mailto:glasgow-haskell-users@@haskell.org">.
-
-To contact the list administrator, send mail to <htmlurl
-name="glasgow-haskell-users-request@@haskell.org"
-url="mailto:glasgow-haskell-users-request@@haskell.org">.  An archive
-of the list is available on the Web: <url name="glasgow-haskell-users
-mailing list archive"
-url="http://www.dcs.gla.ac.uk/mail-www/glasgow-haskell-users">.
-
-<tag>glasgow-haskell-bugs:</tag>
-Send bug reports for GHC to this address!  The sad and lonely people
-who subscribe to this list will muse upon what's wrong and what you
-might do about it.
-
-Subscribe via <htmlurl name="majordomo@@haskell.org"
-url="mailto:majordomo@@haskell.org"> with:
-
-<tscreen><verb>
-subscribe glasgow-haskell-bugs My Name <m.y.self@@hackers.r.us>
-</verb></tscreen>
-
-Again, you may contact the list administrator at <htmlurl
-name="glasgow-haskell-bugs-request@@haskell.org"
-url="mailto:glasgow-haskell-bugs-request@@haskell.org">.
-And, yes, an archive of the list is available on the Web at: : <url
-name="glasgow-haskell-bugs mailing list archive"
-url="http://www.dcs.gla.ac.uk/mail-www/glasgow-haskell-bugs">
-
-</descrip>
-
-There is also the general Haskell mailing list.  Subscribe by sending
-email to <htmlurl name="majordomo@@dcs.gla.ac.uk"
-url="mailto:majordomo@@dcs.gla.ac.uk">, with the usual message body:
-
-<tscreen><verb>
-subscribe haskell My Name <m.y.self@@fp.rules.ok.org>
-</verb></tscreen>
-
-Some Haskell-related discussion takes place in the Usenet newsgroup
-@comp.lang.functional@.  (But note: news is basically dead at Glasgow.
-That's one reason Glaswegians aren't too active in c.f.l.)
-
-The main anonymous-FTP site for Glasgow Haskell is <htmlurl
-name="ftp://ftp.dcs.gla.ac.uk/pub/haskell/glasgow"
-url="ftp://ftp.dcs.gla.ac.uk/pub/haskell/glasgow">.  ``Important''
-bits are mirrored at other Haskell archive sites (and we have their
-stuff, too).
diff --git a/ghc/docs/users_guide/lang.vsgml b/ghc/docs/users_guide/lang.vsgml
deleted file mode 100644
index 2e03a0e..0000000
--- a/ghc/docs/users_guide/lang.vsgml
+++ /dev/null
@@ -1,9 +0,0 @@
-%************************************************************************
-%*                                                                      *
-<sect>GHC Language Features
-<label id="ghc-language-features">
-<p>
-<nidx>language, GHC</nidx>
-<nidx>extensions, GHC</nidx>
-%*                                                                      *
-%************************************************************************
diff --git a/ghc/docs/users_guide/libmisc.vsgml b/ghc/docs/users_guide/libmisc.vsgml
deleted file mode 100644
index d6b926a..0000000
--- a/ghc/docs/users_guide/libmisc.vsgml
+++ /dev/null
@@ -1,870 +0,0 @@
-%************************************************************************
-%*                                                                      *
-<sect1>Miscellaneous libraries
-<label id="GHC-library">
-<p>
-<nidx>libraries, miscellaneous</nidx>
-<nidx>misc, syslib</nidx>
-%*                                                                      *
-%************************************************************************
-
-This section describes a collection of Haskell libraries we've
-collected over the years.  Access to any of these modules is provided
-by giving the @-syslib misc@<nidx>-syslib misc option</nidx>.
-
-%************************************************************************
-%*                                                                      *
-<sect2>The @Bag@ type
-<label id="Bag">
-<p>
-<nidx>Bag module (misc syslib)</nidx>
-%*                                                                      *
-%************************************************************************
-
-A <em>bag</em> is an unordered collection of elements which may contain
-duplicates.  To use, @import Bag@.
-
-<tscreen><verb>
-data Bag elt    -- abstract
-
-emptyBag        :: Bag elt
-unitBag         :: elt -> Bag elt
-
-consBag         :: elt       -> Bag elt -> Bag elt
-snocBag         :: Bag elt   -> elt     -> Bag elt
-
-unionBags       :: Bag elt   -> Bag elt -> Bag elt
-unionManyBags   :: [Bag elt] -> Bag elt
-
-isEmptyBag      :: Bag elt   -> Bool
-elemBag         :: Eq elt => elt -> Bag elt -> Bool
-
-filterBag       :: (elt -> Bool) -> Bag elt -> Bag elt
-partitionBag    :: (elt -> Bool) -> Bag elt-> (Bag elt, Bag elt)
-        -- returns the elements that do/don't satisfy the predicate
-
-concatBag       :: Bag (Bag a) -> Bag a 
-foldBag         :: (r -> r -> r) -> (a -> r) -> r -> Bag a -> r
-mapBag          :: (a -> b) -> Bag a -> Bag b
-
-listToBag       :: [elt] -> Bag elt
-bagToList       :: Bag elt -> [elt]
-</verb></tscreen>
-
-%************************************************************************
-%*                                                                      *
-<sect2>The @FiniteMap@ type
-<label id="FiniteMap">
-<p>
-<nidx>FiniteMap module (misc syslib)</nidx>
-%*                                                                      *
-%************************************************************************
-
-What functional programmers call a <em>finite map</em>, everyone else
-calls a <em>lookup table</em>.
-
-Out code is derived from that in this paper:
-<quote>
-S Adams
-"Efficient sets: a balancing act"
-Journal of functional programming 3(4) Oct 1993, pages 553-562
-</quote>
-Guess what?  The implementation uses balanced trees.
-
-<tscreen><verb>
-data FiniteMap key elt  -- abstract
-
---      BUILDING
-emptyFM         :: FiniteMap key elt
-unitFM          :: key -> elt -> FiniteMap key elt
-listToFM        :: Ord key => [(key,elt)] -> FiniteMap key elt
-                        -- In the case of duplicates, the last is taken
-
---      ADDING AND DELETING
-                   -- Throws away any previous binding
-                   -- In the list case, the items are added starting with the
-                   -- first one in the list
-addToFM         :: Ord key => FiniteMap key elt -> key -> elt  -> FiniteMap key elt
-addListToFM     :: Ord key => FiniteMap key elt -> [(key,elt)] -> FiniteMap key elt
-
-                 -- Combines with previous binding
-		 -- In the combining function, the first argument is
-		 -- the "old" element, while the second is the "new" one.
-addToFM_C       :: Ord key => (elt -> elt -> elt)
-                           -> FiniteMap key elt -> key -> elt  
-                           -> FiniteMap key elt
-addListToFM_C   :: Ord key => (elt -> elt -> elt)
-                           -> FiniteMap key elt -> [(key,elt)] 
-                           -> FiniteMap key elt
-
-                 -- Deletion doesn't complain if you try to delete something
-                 -- which isn't there
-delFromFM       :: Ord key => FiniteMap key elt -> key   -> FiniteMap key elt
-delListFromFM   :: Ord key => FiniteMap key elt -> [key] -> FiniteMap key elt
-
---      COMBINING
-                 -- Bindings in right argument shadow those in the left
-plusFM          :: Ord key => FiniteMap key elt -> FiniteMap key elt
-                           -> FiniteMap key elt
-
-                   -- Combines bindings for the same thing with the given function
-plusFM_C        :: Ord key => (elt -> elt -> elt) 
-                           -> FiniteMap key elt -> FiniteMap key elt -> FiniteMap key elt
-
-minusFM         :: Ord key => FiniteMap key elt -> FiniteMap key elt -> FiniteMap key elt
-                   -- (minusFM a1 a2) deletes from a1 any bindings which are bound in a2
-
-intersectFM     :: Ord key => FiniteMap key elt -> FiniteMap key elt -> FiniteMap key elt 
-intersectFM_C   :: Ord key => (elt -> elt -> elt)
-                           -> FiniteMap key elt -> FiniteMap key elt -> FiniteMap key elt 
-
---      MAPPING, FOLDING, FILTERING
-foldFM          :: (key -> elt -> a -> a) -> a -> FiniteMap key elt -> a
-mapFM           :: (key -> elt1 -> elt2) -> FiniteMap key elt1 -> FiniteMap key elt2
-filterFM        :: Ord key => (key -> elt -> Bool) 
-                           -> FiniteMap key elt -> FiniteMap key elt
-
---      INTERROGATING
-sizeFM          :: FiniteMap key elt -> Int
-isEmptyFM	:: FiniteMap key elt -> Bool
-
-elemFM		:: Ord key => key -> FiniteMap key elt -> Bool
-lookupFM        :: Ord key => FiniteMap key elt -> key -> Maybe elt
-lookupWithDefaultFM
-                :: Ord key => FiniteMap key elt -> elt -> key -> elt
-                -- lookupWithDefaultFM supplies a "default" elt
-                -- to return for an unmapped key
-
---      LISTIFYING
-fmToList        :: FiniteMap key elt -> [(key,elt)]
-keysFM          :: FiniteMap key elt -> [key]
-eltsFM          :: FiniteMap key elt -> [elt]
-</verb></tscreen>
-
-%************************************************************************
-%*                                                                      *
-<sect2>The @ListSetOps@ type
-<label id="ListSetOps">
-<p>
-<nidx>ListSetOps module (misc syslib)</nidx>
-%*                                                                      *
-%************************************************************************
-
-Just a few set-sounding operations on lists.  If you want sets, use
-the @Set@ module.
-
-<tscreen><verb>
-unionLists          :: Eq a => [a] -> [a] -> [a]
-intersectLists      :: Eq a => [a] -> [a] -> [a]
-minusList           :: Eq a => [a] -> [a] -> [a]
-disjointLists       :: Eq a => [a] -> [a] -> Bool
-intersectingLists   :: Eq a => [a] -> [a] -> Bool
-</verb></tscreen>
-
-%************************************************************************
-%*                                                                      *
-<sect2>The @Maybes@ type
-<label id="Maybes">
-<p>
-<nidx>Maybes module (misc syslib)</nidx>
-%*                                                                      *
-%************************************************************************
-
-The @Maybe@ type is in the Haskell 1.4 prelude. Moreover, the
-required @Maybe@ library provides many useful functions on
-@Maybe@s. This (pre-1.3) module provides some more:
-
-An @Either@-like type called @MaybeErr@:
-<tscreen><verb>
-data MaybeErr val err = Succeeded val | Failed err
-</verb></tscreen>
-
-Some operations to do with @Maybe@ (some commentary follows):
-<tscreen><verb>
-maybeToBool :: Maybe a -> Bool      -- Nothing => False; Just => True
-allMaybes   :: [Maybe a] -> Maybe [a]
-firstJust   :: [Maybe a] -> Maybe a
-findJust    :: (a -> Maybe b) -> [a] -> Maybe b
-
-assocMaybe  :: Eq a => [(a,b)] -> a -> Maybe b
-mkLookupFun :: (key -> key -> Bool) -- Equality predicate
-            -> [(key,val)]          -- The assoc list
-            -> (key -> Maybe val)   -- A lookup fun to use
-mkLookupFunDef :: (key -> key -> Bool)	-- Equality predicate
-	       -> [(key,val)] 		-- The assoc list
-	       -> val 			-- Value to return on failure
-	       -> key 			-- The key
-	       -> val			-- The corresponding value
-
-    -- a monad thing
-thenMaybe   :: Maybe a -> (a -> Maybe b) -> Maybe b
-returnMaybe :: a -> Maybe a
-failMaybe   :: Maybe a
-mapMaybe    :: (a -> Maybe b) -> [a] -> Maybe [b]
-</verb></tscreen>
-
-NB: @catMaybes@ which used to be here, is now available via the
-standard @Maybe@ interface (@Maybe@ is an instance of @MonadPlus@).
-
-@allMaybes@ collects a list of @Justs@ into a single @Just@, returning
-@Nothing@ if there are any @Nothings@.
-
-@firstJust@ takes a list of @Maybes@ and returns the
-first @Just@ if there is one, or @Nothing@ otherwise.
-
-@assocMaybe@ looks up in an association list, returning
-@Nothing@ if it fails.
-
-Now, some operations to do with @MaybeErr@ (comments follow):
-<tscreen><verb>
-    -- a monad thing (surprise, surprise)
-thenMaB   :: MaybeErr a err -> (a -> MaybeErr b err) -> MaybeErr b err
-returnMaB :: val -> MaybeErr val err
-failMaB   :: err -> MaybeErr val err
-
-listMaybeErrs :: [MaybeErr val err] -> MaybeErr [val] [err]
-foldlMaybeErrs :: (acc -> input -> MaybeErr acc err)
-               -> acc
-               -> [input]
-               -> MaybeErr acc [err]
-</verb></tscreen>
-
-@listMaybeErrs@ takes a list of @MaybeErrs@ and, if they all succeed,
-returns a @Succeeded@ of a list of their values.  If any fail, it
-returns a @Failed@ of the list of all the errors in the list.
-
-@foldlMaybeErrs@ works along a list, carrying an accumulator; it
-applies the given function to the accumulator and the next list item,
-accumulating any errors that occur.
-
-%************************************************************************
-%*                                                                      *
-<sect2>The @Memo@ library
-<label id="memo-library">
-<p>
-<nidx>Memo (misc syslib)</nidx>
-%*                                                                      *
-%************************************************************************
-
-The @Memo@ library provides fast polymorphic memo functions using hash
-tables.  The interface is:
-
-<tscreen><verb>
-memo :: (a -> b) -> a -> b
-</verb></tscreen>
-
-So, for example, @memo f@ is a version of @f@ that caches the results
-of previous calls.  
-
-The searching is very fast, being based on pointer equality.  One
-consequence of this is that the caching will only be effective if
-<em/exactly the same argument is passed again to the memoised
-function/.  This means not just a copy of a previous argument, but the
-same instance.  It's not useful to memoise integer functions using
-this interface, because integers are generally copied a lot and two
-instances of '27' are unlikely to refer to the same object.
-
-This memoisation library works well when the keys are large (or even
-infinite).
-
-The memo table implementation uses weak pointers and stable names (see
-the GHC/Hugs library document) to avoid space leaks and allow hashing
-for arbitrary Haskell objects.  NOTE: while individual memo table
-entries will be garbage collected if the associated key becomes
-garbage, the memo table itself will not be collected if the function
-becomes garbage.  We plan to fix this in a future version.
-
-There's another version of @memo@ if you want to explicitly give a
-size for the hash table (the default size is 1001 buckets):
-
-<tscreen><verb>
-memo_sized :: Int -> (a -> b) -> a -> b
-</verb></tscreen>
-
-%************************************************************************
-%*                                                                      *
-<sect2>The @PackedString@ type
-<label id="PackedString">
-<p>
-<nidx>PackedString module (misc syslib)</nidx>
-%*                                                                      *
-%************************************************************************
-
-You need to @import PackedString@ and heave in your
-@-syslib ghc@ to use @PackedString@s.
-
-The basic type and functions available are:
-<tscreen><verb>
-data PackedString -- abstract
-
-packString          :: [Char] -> PackedString
-packStringST        :: [Char] -> ST s PackedString
-packCBytesST        :: Int -> Addr -> ST s PackedString
-packBytesForCST     :: [Char] -> ST s (ByteArray Int)
-byteArrayToPS       :: ByteArray Int -> PackedString
-unsafeByteArrayToPS :: ByteArray a   -> Int -> PackedString
-psToByteArray       :: PackedString -> ByteArray Int
-psToByteArrayST     :: PackedString -> ST s (ByteArray Int)
-
-unpackPS        :: PackedString -> [Char]
-</verb></tscreen>
-
-We also provide a wad of list-manipulation-like functions:
-<tscreen><verb>
-nilPS       :: PackedString
-consPS      :: Char -> PackedString -> PackedString
-
-headPS      :: PackedString -> Char
-tailPS      :: PackedString -> PackedString
-nullPS      :: PackedString -> Bool
-appendPS    :: PackedString -> PackedString -> PackedString
-lengthPS    :: PackedString -> Int
-indexPS     :: PackedString -> Int -> Char
-            -- 0-origin indexing into the string
-mapPS       :: (Char -> Char) -> PackedString -> PackedString
-filterPS    :: (Char -> Bool) -> PackedString -> PackedString
-foldlPS     :: (a -> Char -> a) -> a -> PackedString -> a
-foldrPS     :: (Char -> a -> a) -> a -> PackedString -> a
-takePS      :: Int -> PackedString -> PackedString
-dropPS      :: Int -> PackedString -> PackedString
-splitAtPS   :: Int -> PackedString -> (PackedString, PackedString)
-takeWhilePS :: (Char -> Bool) -> PackedString -> PackedString
-dropWhilePS :: (Char -> Bool) -> PackedString -> PackedString
-spanPS      :: (Char -> Bool) -> PackedString -> (PackedString, PackedString)
-breakPS     :: (Char -> Bool) -> PackedString -> (PackedString, PackedString)
-linesPS     :: PackedString -> [PackedString]
-wordsPS     :: PackedString -> [PackedString]
-reversePS   :: PackedString -> PackedString
-concatPS    :: [PackedString] -> PackedString
-elemPS      :: Char -> PackedString -> Bool
-  -- Perl-style split&join
-splitPS     :: Char -> PackedString -> [PackedString]
-splitWithPS :: (Char -> Bool) -> PackedString -> [PackedString]
-joinPS      :: PackedString -> [PackedString] -> PackedString
-
-substrPS   :: PackedString -> Int -> Int -> PackedString
-           -- pluck out a piece of a PackedString
-           -- start and end chars you want; both 0-origin-specified
-</verb></tscreen>
-
-%************************************************************************
-%*                                                                      *
-<sect2>The @Set@ type
-<label id="Set">
-<p>
-<nidx>Set module (misc syslib)</nidx>
-%*                                                                      *
-%************************************************************************
-
-Our implementation of <em>sets</em> (key property: no duplicates) is just
-a variant of the @FiniteMap@ module.
-
-<tscreen><verb>
-data Set        -- abstract
-                -- instance of: Eq
-
-emptySet        :: Set a
-mkSet           :: Ord a => [a]  -> Set a
-setToList       :: Set a -> [a]
-unitSet         :: a -> Set a
-singletonSet    :: a -> Set a  -- deprecated, use unitSet.
-
-union           :: Ord a => Set a -> Set a -> Set a
-unionManySets   :: Ord a => [Set a] -> Set a
-minusSet        :: Ord a => Set a -> Set a -> Set a
-mapSet          :: Ord a => (b -> a) -> Set b -> Set a
-intersect       :: Ord a => Set a -> Set a -> Set a
-
-elementOf       :: Ord a => a -> Set a -> Bool
-isEmptySet      :: Set a -> Bool
-
-cardinality     :: Set a -> Int
-
-</verb></tscreen>
-
-%************************************************************************
-%*                                                                      *
-<sect2>The @BitSet@ interface
-<label id="BitSet">
-<p>
-<nidx>Bitset interface (misc syslib)</nidx>
-%*                                                                      *
-%************************************************************************
-
-Bit sets are a fast implementation of sets of integers ranging from 0
-to one less than the number of bits in a machine word (typically 31).
-If any element exceeds the maximum value for a particular machine
-architecture, the results of these operations are undefined.  You have
-been warned. 
-
-<tscreen><verb>
-data BitSet   -- abstract
-              -- instance of:
-
-emptyBS       :: BitSet
-mkBS          :: [Int] -> BitSet
-unitBS        :: Int -> BitSet
-unionBS       :: BitSet -> BitSet -> BitSet
-minusBS       :: BitSet -> BitSet -> BitSet
-isEmptyBS     :: BitSet -> Bool
-intersectBS   :: BitSet -> BitSet -> BitSet
-elementBS     :: Int -> BitSet -> Bool
-listBS        :: BitSet -> [Int]
-</verb></tscreen>
-
-%************************************************************************
-%*                                                                      *
-<sect2>The @Util@ type
-<label id="Util">
-<p>
-<nidx>Util module (misc syslib)</nidx>
-%*                                                                      *
-%************************************************************************
-
-Stuff that has been generally useful to use in writing the compiler.
-Don't be too surprised if this stuff moves/gets-renamed/etc.
-
-<tscreen><verb>
--- general list processing
-forall          :: (a -> Bool) -> [a] -> Bool
-exists          :: (a -> Bool) -> [a] -> Bool
-
-nOfThem         :: Int -> a -> [a]
-lengthExceeds   :: [a] -> Int -> Bool
-isSingleton     :: [a] -> Bool
-
---paranoid zip'ing (equal length lists)
-zipEqual        :: [a] -> [b] -> [(a,b)]
-zipWithEqual	:: String -> (a->b->c) -> [a]->[b]->[c]
-zipWith3Equal	:: String -> (a->b->c->d) -> [a]->[b]->[c]->[d]
-zipWith4Equal	:: String -> (a->b->c->d->e) -> [a]->[b]->[c]->[d]->[e]
--- lazy in second argument
-zipLazy :: [a] -> [b] -> [(a,b)]
-
-mapAndUnzip :: (a -> (b, c)) -> [a] -> ([b], [c])
-mapAndUnzip3 :: (a -> (b, c, d)) -> [a] -> ([b], [c], [d])
-
--- prefix and suffix matching on lists of characters.
-startsWith :: {-prefix-}String -> String -> Maybe String
-endsWith   :: {-suffix-}String -> String -> Maybe String
-
--- association lists
-assoc       :: Eq a => String -> [(a, b)] -> a -> b
-
--- duplicate handling
-hasNoDups    :: Eq a => [a] -> Bool
-equivClasses :: (a -> a -> Ordering) -> [a] -> [[a]]
-runs         :: (a -> a -> Bool)     -> [a] -> [[a]]
-removeDups   :: (a -> a -> Ordering) -> [a] -> ([a], [[a]])
-
--- sorting (don't complain of no choice...)
-quicksort          :: (a -> a -> Bool)     -> [a] -> [a]
-sortLt             :: (a -> a -> Bool)     -> [a] -> [a]
-stableSortLt       :: (a -> a -> Bool)     -> [a] -> [a]
-mergesort          :: (a -> a -> _CMP_TAG) -> [a] -> [a]
-mergeSort          :: Ord a => [a] -> [a]
-naturalMergeSort   :: Ord a => [a] -> [a]
-mergeSortLe        :: Ord a => [a] -> [a]
-naturalMergeSortLe :: Ord a => [a] -> [a]
-
--- transitive closures
-transitiveClosure :: (a -> [a])         -- Successor function
-                  -> (a -> a -> Bool)   -- Equality predicate
-                  -> [a] 
-                  -> [a]                -- The transitive closure
-
--- accumulating (Left, Right, Bi-directional)
-mapAccumL :: (acc -> x -> (acc, y))
-                        -- Function of elt of input list and
-                        -- accumulator, returning new accumulator and
-                        -- elt of result list
-          -> acc        -- Initial accumulator
-          -> [x]        -- Input list
-          -> (acc, [y]) -- Final accumulator and result list
-
-mapAccumR :: (acc -> x -> (acc, y)) -> acc -> [x] -> (acc, [y])
-
-mapAccumB :: (accl -> accr -> x -> (accl, accr,y))
-          -> accl -> accr -> [x]
-          -> (accl, accr, [y])
-
---list comparison with explicit element comparer.
-cmpList :: (a -> a -> Ordering) -> [a] -> [a] -> Ordering
-
--- pairs
-applyToPair :: ((a -> c), (b -> d)) -> (a, b) -> (c, d)
-applyToFst  :: (a -> c) -> (a, b) -> (c, b)
-applyToSnd  :: (b -> d) -> (a, b) -> (a, d)
-foldPair    :: (a->a->a, b->b->b) -> (a, b) -> [(a, b)] -> (a, b)
-unzipWith   :: (a -> b -> c) -> [(a, b)] -> [c]
-</verb></tscreen>
-
-%************************************************************************
-%*                                                                      *
-<sect1>Interfaces to C libraries
-<label id="C-interfaces">
-<p>
-<nidx>C library interfaces</nidx>
-<nidx>interfaces, C library</nidx>
-%*                                                                      *
-%************************************************************************
-
-The GHC system library (@-syslib misc@) also provides interfaces to
-several useful C libraries, mostly from the GNU project.
-
-%************************************************************************
-%*                                                                      *
-<sect2>The @Readline@ interface
-<label id="Readline">
-<p>
-<nidx>Readline library (misc syslib)</nidx>
-<nidx>command-line editing library</nidx>
-%*                                                                      *
-%************************************************************************
-
-(Darren Moffat supplied the @Readline@ interface.)
-
-The @Readline@ module is a straightforward interface to the GNU
-Readline library.  As such, you will need to look at the GNU
-documentation (and have a @libreadline.a@ file around somewhere...)
-
-You'll need to link any Readlining program with @-lreadline -ltermcap@,
-besides the usual @-syslib ghc@ (and @-fhaskell-1.3@).
-
-The main function you'll use is:
-<tscreen><verb>
-readline :: String{-the prompt-} -> IO String
-</verb></tscreen>
-
-If you want to mess around with Full Readline G(l)ory, we also
-provide:
-<tscreen><verb>
-rlInitialize, addHistory,
-
-rlBindKey, rlAddDefun, RlCallbackFunction(..),
-
-rlGetLineBuffer, rlSetLineBuffer, rlGetPoint, rlSetPoint, rlGetEnd,
-rlSetEnd, rlGetMark, rlSetMark, rlSetDone, rlPendingInput,
-
-rlPrompt, rlTerminalName, rlSetReadlineName, rlGetReadlineName
-</verb></tscreen>
-(All those names are just Haskellised versions of what you
-will see in the GNU readline documentation.)
-
-%************************************************************************
-%*                                                                      *
-<sect2>The @Regex@ and @MatchPS@ interfaces
-<label id="Regex">
-<p>
-<nidx>Regex library (misc syslib)</nidx>
-<nidx>MatchPS library (misc syslib)</nidx>
-<nidx>regular-expressions library</nidx>
-%*                                                                      *
-%************************************************************************
-
-(Sigbjorn Finne supplied the regular-expressions interface.)
-
-The @Regex@ library provides quite direct interface to the GNU
-regular-expression library, for doing manipulation on @PackedString@s.
-You probably need to see the GNU documentation if you are operating at
-this level.  Alternatively, you can use the simpler and higher-level
-@RegexString@ interface.
-
-The datatypes and functions that @Regex@ provides are:
-<tscreen><verb>
-data PatBuffer	# just a bunch of bytes (mutable)
-
-data REmatch
- = REmatch (Array Int GroupBounds)  -- for $1, ... $n
-	   GroupBounds		    -- for $` (everything before match)
-	   GroupBounds		    -- for $& (entire matched string)
-	   GroupBounds		    -- for $' (everything after)
-	   GroupBounds		    -- for $+ (matched by last bracket)
-
--- GroupBounds hold the interval where a group
--- matched inside a string, e.g.
---
--- matching "reg(exp)" "a regexp" returns the pair (5,7) for the
--- (exp) group. (PackedString indices start from 0)
-
-type GroupBounds = (Int, Int)
-
-re_compile_pattern
-	:: PackedString	        -- pattern to compile
-	-> Bool			-- True <=> assume single-line mode
-	-> Bool			-- True <=> case-insensitive
-	-> PrimIO PatBuffer
-
-re_match :: PatBuffer		-- compiled regexp
-	 -> PackedString	-- string to match
-	 -> Int			-- start position
-	 -> Bool		-- True <=> record results in registers
-	 -> PrimIO (Maybe REmatch)
-
--- Matching on 2 strings is useful when you're dealing with multiple
--- buffers, which is something that could prove useful for
--- PackedStrings, as we don't want to stuff the contents of a file
--- into one massive heap chunk, but load (smaller chunks) on demand.
-
-re_match2 :: PatBuffer		-- 2-string version
-	  -> PackedString
-	  -> PackedString
-	  -> Int
-	  -> Int
-	  -> Bool
-	  -> PrimIO (Maybe REmatch)
-
-re_search :: PatBuffer		-- compiled regexp
-	  -> PackedString	-- string to search
-	  -> Int		-- start index
-	  -> Int		-- stop index
-	  -> Bool		-- True <=> record results in registers
-	  -> PrimIO (Maybe REmatch)
-
-re_search2 :: PatBuffer		-- Double buffer search
-	   -> PackedString
-	   -> PackedString
-	   -> Int		-- start index
-	   -> Int		-- range (?)
-	   -> Int		-- stop index
-	   -> Bool		-- True <=> results in registers
-	   -> PrimIO (Maybe REmatch)
-</verb></tscreen>
-
-The @MatchPS@ module provides Perl-like ``higher-level'' facilities
-to operate on @PackedStrings@.  The regular expressions in
-question are in Perl syntax.  The ``flags'' on various functions can
-include: @i@ for case-insensitive, @s@ for single-line mode, and
-@g@ for global.  (It's probably worth your time to peruse the
-source code...)
-
-<tscreen><verb>
-matchPS :: PackedString    -- regexp
-	-> PackedString    -- string to match
-	-> [Char]	   -- flags
-	-> Maybe REmatch   -- info about what matched and where
-
-searchPS :: PackedString    -- regexp
-	 -> PackedString    -- string to match
-	 -> [Char]	    -- flags
-	 -> Maybe REmatch
-
--- Perl-like match-and-substitute:
-substPS :: PackedString     -- regexp
-	-> PackedString     -- replacement
-	-> [Char]	    -- flags
-	-> PackedString     -- string
-	-> PackedString
-
--- same as substPS, but no prefix and suffix:
-replacePS :: PackedString  -- regexp
-	  -> PackedString  -- replacement
-	  -> [Char]	   -- flags
-	  -> PackedString  -- string
-	  -> PackedString
-
-match2PS :: PackedString   -- regexp
-	 -> PackedString   -- string1 to match
-	 -> PackedString   -- string2 to match
-	 -> [Char]	   -- flags
-	 -> Maybe REmatch
-
-search2PS :: PackedString  -- regexp
-	  -> PackedString  -- string to match
-	  -> PackedString  -- string to match
-	  -> [Char]	   -- flags
-	  -> Maybe REmatch
-
--- functions to pull the matched pieces out of an REmatch:
-
-getMatchesNo    :: REmatch -> Int
-getMatchedGroup :: REmatch -> Int -> PackedString -> PackedString
-getWholeMatch   :: REmatch -> PackedString -> PackedString
-getLastMatch    :: REmatch -> PackedString -> PackedString
-getAfterMatch   :: REmatch -> PackedString -> PackedString
-
--- (reverse) brute-force string matching;
--- Perl equivalent is index/rindex:
-findPS, rfindPS :: PackedString -> PackedString -> Maybe Int
-
--- Equivalent to Perl "chop" (off the last character, if any):
-chopPS :: PackedString -> PackedString
-
--- matchPrefixPS: tries to match as much as possible of strA starting
--- from the beginning of strB (handy when matching fancy literals in
--- parsers):
-matchPrefixPS :: PackedString -> PackedString -> Int
-</verb></tscreen>
-
-%************************************************************************
-%*                                                                      *
-<sect2>The @RegexString@ interface
-<label id="RegexString">
-<p>
-<nidx>RegexString library (misc syslib)</nidx>
-<nidx>regular-expressions library</nidx>
-%*                                                                      *
-%************************************************************************
-
-(Simon Marlow supplied the String Regex wrapper.)
-
-For simple regular expression operations, the @Regex@ library is a
-little heavyweight.  @RegexString@ permits regex matching on ordinary
-Haskell @String@s.
-
-The datatypes and functions that @RegexString@ provides are:
-<tscreen><verb>
-data Regex              -- a compiled regular expression
-
-mkRegex
-        :: String       -- regexp to compile
-        -> Regex        -- compiled regexp
-
-matchRegex
-        :: Regex        -- compiled regexp
-        -> String       -- string to match
-        -> Maybe [String] -- text of $1, $2, ... (if matched)
-</verb></tscreen>
-
-%************************************************************************
-%*                                                                      *
-<sect2>Network-interface toolkit---@Socket@ and @SocketPrim@
-<label id="Socket">
-<p>
-<nidx>SocketPrim interface (misc syslib)</nidx>
-<nidx>Socket interface (misc syslib)</nidx>
-<nidx>network-interface library</nidx>
-<nidx>sockets library</nidx>
-<nidx>BSD sockets library</nidx>
-%*                                                                      *
-%************************************************************************
-
-(Darren Moffat supplied the initial version of this library.)
-
-Your best bet for documentation is to look at the code---really!--- 
-normally in @fptools/ghc/lib/misc/{BSD,Socket,SocketPrim@.lhs}.
-
-The @BSD@ module provides functions to get at system-database info;
-pretty straightforward if you're into this sort of thing:
-<tscreen><verb>
-getHostName	    :: IO String
-
-getServiceByName    :: ServiceName -> IO ServiceEntry
-getServicePortNumber:: ServiceName -> IO PortNumber
-getServiceEntry	    :: IO ServiceEntry
-setServiceEntry	    :: Bool -> IO ()
-endServiceEntry	    :: IO ()
-
-getProtocolByName   :: ProtocolName -> IO ProtocolEntry
-getProtocolByNumber :: ProtocolNumber -> IO ProtcolEntry
-getProtocolNumber   :: ProtocolName -> ProtocolNumber
-getProtocolEntry    :: IO ProtocolEntry
-setProtocolEntry    :: Bool -> IO ()
-endProtocolEntry    :: IO ()
-
-getHostByName	    :: HostName -> IO HostEntry
-getHostByAddr	    :: Family -> HostAddress -> IO HostEntry
-getHostEntry	    :: IO HostEntry
-setHostEntry	    :: Bool -> IO ()
-endHostEntry	    :: IO ()
-</verb></tscreen>
-
-The @SocketPrim@ interface provides quite direct access to the
-socket facilities in a BSD Unix system, including all the
-complications.  We hope you don't need to use it!  See the source if
-needed...
-
-The @Socket@ interface is a ``higher-level'' interface to sockets,
-and it is what we recommend.  Please tell us if the facilities it
-offers are inadequate to your task!
-
-The interface is relatively modest:
-<tscreen><verb>
-connectTo	:: Hostname -> PortID -> IO Handle
-listenOn	:: PortID -> IO Socket
-
-accept		:: Socket -> IO (Handle, HostName)
-sendTo		:: Hostname -> PortID -> String -> IO ()
-
-recvFrom	:: Hostname -> PortID -> IO String
-socketPort	:: Socket -> IO PortID
-
-data PortID	-- PortID is a non-abstract type
-  = Service String	  -- Service Name eg "ftp"
-  | PortNumber PortNumber -- User defined Port Number
-  | UnixSocket String	  -- Unix family socket in file system
-
-type Hostname = String
-
- -- 16-bit value (stored in network byte order).
-data PortNumber
- -- instance of: Eq, Num, Show.
-
-mkPortNumber :: Int -> PortNumber
-</verb></tscreen>
-
-Various examples of networking Haskell code are provided in
-%@ghc/misc/examples/@, notably the @net???/Main.hs@ programs.
-
-%************************************************************************
-%*                                                                      *
-<sect2>The @Select@ interface
-<label id="Select">
-<p>
-<nidx>Select interface (misc syslib)</nidx>
-%*                                                                      *
-%************************************************************************
-
-The <tt/Select/ interface provides a Haskell wrapper for the <tt/select()/
-OS call supplied by many modern UNIX variants. <tt/Select/ exports the
-following:
-
-<tscreen><verb>
-type TimeOut = Maybe Int
-  -- Nothing => wait indefinitely.
-  -- Just x | x >= 0    => block waiting for 'x' micro seconds.
-  --        | otherwise => block waiting for '-x' micro seconds.
-
-hSelect :: [Handle]
-        -> [Handle]
-        -> [Handle]
-        -> TimeOut
-	-> IO SelectResult
-
-type SelectResult 
- = ( [Handle]  -- input  handles ready
-   , [Handle]  -- output handles ready
-   , [Handle]  -- exc.   handles ready
-   )
-
-</verb></tscreen>
-
-Here's an example of how it could be used:
-
-<tscreen><verb>
-module Main(main) where
-
-import Select
-import IO
-
-main :: IO ()
-main = do
-  hSetBuffering stdin NoBuffering
-  putStrLn "waiting for input to appear"
-  hSelect [stdin] [] [] Nothing
-  putStrLn "input ready, let's try reading"
-  x <- getChar
-  print x
-
-</verb></tscreen>
-
-where the call to <tt/hSelect/ makes the process go to sleep
-until there's input available on <tt/stdin/.
-
-Notice that this particular use of <tt/hSelect/ is now really a no-op
-with GHC compiled code, as its implementation of IO will take care to
-avoid blocking the process (i.e., all running Haskell threads), and
-call <tt/select()/ for you, if needs be. However, <tt/hSelect/ exposes
-functionality that is useful in other contexts (e.g., you want to 
-wait for input on two <tt/Handles/ for 3 seconds, but no longer.)
-
diff --git a/ghc/docs/users_guide/libraries.vsgml b/ghc/docs/users_guide/libraries.vsgml
deleted file mode 100644
index 4c48c37..0000000
--- a/ghc/docs/users_guide/libraries.vsgml
+++ /dev/null
@@ -1,891 +0,0 @@
-% 
-% $Id: libraries.vsgml,v 1.6 1999/08/17 15:39:38 simonpj Exp $
-%
-% GHC Prelude and Libraries.
-%
-
-<sect>The GHC prelude and libraries
-<label id="ghc-prelude">
-<p>
-
-This document describes GHC's prelude and libraries.  The basic story is that of
-the Haskell 1.4 Report and Libraries document (which we do not reproduce here),
-but this document describes in addition:
-
-<itemize>
-
-<item>  GHC's additional non-standard libraries and types, such as
-        state transformers, packed strings, foreign objects, stable
-	pointers, and so on.
-
-<item>  GHC's primitive types and operations.  The standard Haskell
-        functions are implemented on top of these, and it is sometimes
-	useful to use them directly.
-
-<item>  The organisation of these libraries into directories.
-
-<item> Short description of programmer interface to the non-standard
-       libraries provided in addition to the standard prelude.
-</itemize>
-
-A number of the libraries that provide access to GHC's language
-extensions are shared by Hugs, and are described in the <htmlurl
-name="GHC/Hugs Extension Libraries" url="libs.html"> document.
-
-<sect1>Prelude extensions
-<label id="ghc-prelude-exts">
-<p>
-
-GHC's prelude contains the following non-standard extensions:
-
-<descrip>
-
-<tag>@fromInt@ method in class @Num@:</tag> It's there.  Converts from
-an @Int@ to the type.
-
-<tag>@toInt@ method in class @Integral@:</tag> Converts from Integral
-type to an @Int@.
-
-</descrip>
-
-GHC also internally uses a number of modules that begin with the
-string @Prel@<nidx>Prel module prefix</nidx>: for this reason, we
-don't recommend that you use any module names beginning with @Prel@ in
-your own programs.  The @Prel@ modules are always available: in fact,
-you can get access to several extensions this way (for some you might
-need to give the @-fglasgow-exts@<nidx>-fglasgow-exts option</nidx>
-flag).
-
-
-<sect1>GHC/Hugs Extension Libraries
-<p>
-
-The extension libraries provided by both GHC and Hugs are described in
-the 
-<htmlurl name="GHC/Hugs Extension Library Document" url="http://www.dcs.gla.ac.uk/fp/software/ghc/hg-libs/hg-libs.html">
-
-<sect1>GHC-only Extension Libraries
-<p>
-<nidx>libraries, ghc-only</nidx>
-<nidx>extension libraries, ghc-only</nidx>
-
-If you rely on the implicit @import Prelude@ that GHC normally does
-for you, and if you don't use any weird flags (notably
-@-fglasgow-exts@), and if you don't import the Glasgow extensions
-interface, @GlaExts@, then GHC should work <em>exactly</em> as the
-Haskell report says (modulo a few minor issues, see Section <ref
-id="vs-Haskell-defn" name="Language Non-compliance">).
-
-If you turn on @-fglasgow-exts@, a new world opesn up to you and the compiler
-will recognise and parse unboxed values properly, and provide access to the
-various interfaces libraries described here (and piles of other goodies.)
-
-&mutablearray;
-&bytearray;
-
-<sect2>The @CCall@ module
-<p>
-
-The @CCall@ module defines the classes @CCallable@ and @CReturnable@,
-along with instances for the primitive types (@Int@, @Int#@, @Float@,
-@Float#@ etc.)  GHC knows to import this module if you use @_ccall_@,
-but if you need to define your own instances of these classes, you
-will need to import @CCall@ explicitly.
-
-More information on how to use @_ccall_@ can be found in Section
-<ref name="Calling~C directly from Haskell" id="glasgow-ccalls">.
-							
-<sect2>The @GlaExts@ interface
-<p>
-<nidx>GlaExts interface (GHC extensions)</nidx>
-
-The @GlaExts@ interface provides access to extensions that only GHC
-implements.  These currently are: unboxed types, including the
-representations of the primitive types (Int, Float, etc.), and the
-GHC primitive operations (@+#@, @==#@, etc.).
-
-This module used to provide access to all the Glasgow extensions, but
-these have since been moved into separate libraries for compatibility
-with Hugs (version 2.09: in fact, you can still get at this stuff via
-@GlaExts@ for compatibility, but this facility will likely be removed
-in the future).
-
-<tscreen><verb>
--- the representation of some basic types:
-data Char    = C# Char#
-data Int     = I# Int#
-data Addr    = A# Addr#
-data Word    = W# Word#
-data Float   = F# Float#
-data Double  = D# Double#
-data Integer = S# Int#              -- small integers
-             | J# Int# ByteArray#   -- large integers
-
-module GHC  -- all primops and primitive types.
-</verb></tscreen>
-
-<sect1>The module @PrelGHC@: really primitive stuff
-<label id="ghc-libs-ghc">
-<p>
-<nidx>PrelGHC module</nidx>
-
-This module defines all the types which are primitive in Glasgow
-Haskell, and the operations provided for them.
-
-A primitive type is one which cannot be defined in Haskell, and which
-is therefore built into the language and compiler.  Primitive types
-are always unlifted; that is, a value of primitive type cannot be
-bottom.  We use the convention that primitive types, values, and
-operations have a @#@ suffix.
-
-Primitive values are often represented by a simple bit-pattern, such
-as @Int#@, @Float#@, @Double#@.  But this is not necessarily the case:
-a primitive value might be represented by a pointer to a
-heap-allocated object.  Examples include @Array#@, the type of
-primitive arrays.  A primitive array is heap-allocated because it is
-too big a value to fit in a register, and would be too expensive to
-copy around; in a sense, it is accidental that it is represented by a
-pointer.  If a pointer represents a primitive value, then it really
-does point to that value: no unevaluated thunks, no
-indirections...nothing can be at the other end of the pointer than the
-primitive value.
-
-<sect2>Unboxed Tuples
-<label id="unboxed-tuples">
-<p>
-
-Unboxed tuples aren't really exported by @PrelGHC@, they're available
-by default with @-fglasgow-exts@.  An unboxed tuple looks like this:
-
-<tscreen><verb>
-(# e_1, ..., e_n #)
-</verb></tscreen>
-
-where @e_1..e_n@ are expressions of any type (primitive or
-non-primitive).  The type of an unboxed tuple looks the same.
-
-Unboxed tuples are used for functions that need to return multiple
-values, but they avoid the heap allocation normally associated with
-using fully-fledged tuples.  When an unboxed tuple is returned, the
-components are put directly into registers or on the stack; the
-unboxed tuple itself does not have a composite representation.  Many
-of the primitive operations listed in this section return unboxed
-tuples.
-
-There are some pretty stringent restrictions on the use of unboxed tuples:
-
-<itemize> 
-
-<item> Unboxed tuple types are subject to the same restrictions as
-other unboxed types; i.e. they may not be stored in polymorphic data
-structures or passed to polymorphic functions.
-
-<item> Unboxed tuples may only be constructed as the direct result of
-a function, and may only be deconstructed with a @case@ expression.
-eg. the following are valid:
-
-<tscreen><verb>
-f x y = (# x+1, y-1 #)
-g x = case f x x of { (# a, b #) -> a + b }
-</verb></tscreen>
-
-but the following are invalid:
-
-<tscreen><verb>
-f x y = g (# x, y #)
-g (# x, y #) = x + y
-</verb></tscreen>
-
-<item> No variable can have an unboxed tuple type.  This is illegal:
-
-<tscreen><verb>
-f :: (# Int, Int #) -> (# Int, Int #)
-f x = x
-</verb></tscreen>
-
-because @x@ has an unboxed tuple type.
-
-</itemize>
-
-Note: we may relax some of these restrictions in the future.
-
-The @IO@ and @ST@ monads use unboxed tuples to avoid unnecessary
-allocation during sequences of operations.
-
-<sect2>Character and numeric types
-<p>
-<nidx>character types, primitive</nidx>
-<nidx>numeric types, primitive</nidx>
-<nidx>integer types, primitive</nidx>
-<nidx>floating point types, primitive</nidx>
-
-There are the following obvious primitive types:
-
-<tscreen><verb>
-type Char#
-type Int#	-- see also Word# and Addr#, later
-type Float#
-type Double#
-</verb></tscreen>
-<ncdx>Char#</ncdx>
-<ncdx>Int#</ncdx>
-<ncdx>Float#</ncdx>
-<ncdx>Double#</ncdx>
-
-If you really want to know their exact equivalents in C, see
-@ghc/includes/StgTypes.h@ in the GHC source tree.
-
-Literals for these types may be written as follows:
-
-<tscreen><verb>
-1#		an Int#
-1.2#		a Float#
-1.34##		a Double#
-'a'#		a Char#; for weird characters, use '\o<octal>'#
-"a"#		an Addr# (a `char *')
-</verb></tscreen>
-<nidx>literals, primitive</nidx>
-<nidx>constants, primitive</nidx>
-<nidx>numbers, primitive</nidx>
-
-<sect2> Comparison operations
-<p>
-<nidx>comparisons, primitive</nidx>
-<nidx>operators, comparison</nidx>
-
-<tscreen><verb>
-{>,>=,==,/=,<,<=}# :: Int# -> Int# -> Bool
-
-{gt,ge,eq,ne,lt,le}Char# :: Char# -> Char# -> Bool
-    -- ditto for Word# and Addr#
-</verb></tscreen>
-<ncdx>>#</ncdx>
-<ncdx>>=#</ncdx>
-<ncdx>==#</ncdx>
-<ncdx>/=#</ncdx>
-<ncdx><#</ncdx>
-<ncdx><=#</ncdx>
-<ncdx>gt{Char,Word,Addr}#</ncdx>
-<ncdx>ge{Char,Word,Addr}#</ncdx>
-<ncdx>eq{Char,Word,Addr}#</ncdx>
-<ncdx>ne{Char,Word,Addr}#</ncdx>
-<ncdx>lt{Char,Word,Addr}#</ncdx>
-<ncdx>le{Char,Word,Addr}#</ncdx>
-
-<sect2> Primitive-character operations
-<p>
-<nidx>characters, primitive operations</nidx>
-<nidx>operators, primitive character</nidx>
-
-<tscreen><verb>
-ord# :: Char# -> Int#
-chr# :: Int# -> Char#
-</verb></tscreen>
-<ncdx>ord#</ncdx>
-<ncdx>chr#</ncdx>
-
-
-<sect2> Primitive-@Int@ operations
-<p>
-<nidx>integers, primitive operations</nidx>
-<nidx>operators, primitive integer</nidx>
-
-<tscreen><verb>
-{+,-,*,quotInt,remInt}# :: Int# -> Int# -> Int#
-negateInt# :: Int# -> Int#
-
-iShiftL#, iShiftRA#, iShiftRL# :: Int# -> Int# -> Int#
-	-- shift left, right arithmetic, right logical
-</verb></tscreen>
-<ncdx>+#</ncdx>
-<ncdx>-#</ncdx>
-<ncdx>*#</ncdx>
-<ncdx>quotInt#</ncdx>
-<ncdx>remInt#</ncdx>
-<ncdx>iShiftL#</ncdx>
-<ncdx>iShiftRA#</ncdx>
-<ncdx>iShiftRL#</ncdx>
-<nidx>shift operations, integer</nidx>
-
-<bf>Note:</bf> No error/overflow checking!
-
-<sect2> Primitive-@Double@ and @Float@ operations
-<p>
-<nidx>floating point numbers, primitive</nidx>
-<nidx>operators, primitive floating point</nidx>
-
-<tscreen><verb>
-{+,-,*,/}##         :: Double# -> Double# -> Double#
-{<,<=,==,/=,>=,>}## :: Double# -> Double# -> Bool
-negateDouble#       :: Double# -> Double#
-double2Int#	    :: Double# -> Int#
-int2Double#	    :: Int#    -> Double#
-
-{plus,minux,times,divide}Float# :: Float# -> Float# -> Float#
-{gt,ge,eq,ne,lt,le}Float# :: Float# -> Float# -> Bool
-negateFloat#        :: Float# -> Float#
-float2Int#	    :: Float# -> Int#
-int2Float#	    :: Int#   -> Float#
-</verb></tscreen>
-
-<ncdx>+##</ncdx>
-<ncdx>-##</ncdx>
-<ncdx>*##</ncdx>
-<ncdx>/##</ncdx>
-<ncdx><##</ncdx>
-<ncdx><=##</ncdx>
-<ncdx>==##</ncdx>
-<ncdx>=/##</ncdx>
-<ncdx>>=##</ncdx>
-<ncdx>>##</ncdx>
-<ncdx>negateDouble#</ncdx>
-<ncdx>double2Int#</ncdx>
-<ncdx>int2Double#</ncdx>
-
-<ncdx>plusFloat#</ncdx>
-<ncdx>minusFloat#</ncdx>
-<ncdx>timesFloat#</ncdx>
-<ncdx>divideFloat#</ncdx>
-<ncdx>gtFloat#</ncdx>
-<ncdx>geFloat#</ncdx>
-<ncdx>eqFloat#</ncdx>
-<ncdx>neFloat#</ncdx>
-<ncdx>ltFloat#</ncdx>
-<ncdx>leFloat#</ncdx>
-<ncdx>negateFloat#</ncdx>
-<ncdx>float2Int#</ncdx>
-<ncdx>int2Float#</ncdx>
-
-And a full complement of trigonometric functions:
-
-<tscreen> <verb>
-expDouble#	:: Double# -> Double#
-logDouble#	:: Double# -> Double#
-sqrtDouble#	:: Double# -> Double#
-sinDouble#	:: Double# -> Double#
-cosDouble#	:: Double# -> Double#
-tanDouble#	:: Double# -> Double#
-asinDouble#	:: Double# -> Double#
-acosDouble#	:: Double# -> Double#
-atanDouble#	:: Double# -> Double#
-sinhDouble#	:: Double# -> Double#
-coshDouble#	:: Double# -> Double#
-tanhDouble#	:: Double# -> Double#
-powerDouble#	:: Double# -> Double# -> Double#
-</verb></tscreen>
-<nidx>trigonometric functions, primitive</nidx>
-
-similarly for @Float#@.
-
-There are two coercion functions for @Float#@/@Double#@:
-
-<tscreen><verb>
-float2Double#	:: Float# -> Double#
-double2Float#	:: Double# -> Float#
-</verb></tscreen>
-<ncdx>float2Double#</ncdx>
-<ncdx>double2Float#</ncdx>
-
-The primitive versions of @encodeDouble@/@decodeDouble@:
-
-<tscreen><verb>
-encodeDouble#	:: Int# -> Int# -> ByteArray#	-- Integer mantissa
-		-> Int#				-- Int exponent
-		-> Double#
-
-decodeDouble#	:: Double# -> PrelNum.ReturnIntAndGMP
-</verb></tscreen>
-<ncdx>encodeDouble#</ncdx>
-<ncdx>decodeDouble#</ncdx>
-
-(And the same for @Float#@s.)
-
-<sect2>Operations on/for @Integers@ (interface to GMP)
-<label id="integer-operations">
-<p>
-<nidx>arbitrary precision integers</nidx>
-<nidx>Integer, operations on</nidx>
-
-We implement @Integers@ (arbitrary-precision integers) using the GNU
-multiple-precision (GMP) package (version 2.0.2).
-
-The data type for @Integer@ is either a small integer,
-represented by an @Int@, or a large integer represented
-using the pieces requird by GMP's @MP_INT@ in @gmp.h@
-(see @gmp.info@ in @ghc/includes/runtime/gmp@).  It comes out as:
-
-<tscreen><verb>
-data Integer = S# Int#             -- small integers
-             | J# Int# ByteArray#  -- large integers
-</verb></tscreen>
-<nidx>Integer type</nidx>
-The primitive ops to support large @Integers@ use the ``pieces'' of the
-representation, and are as follows:
-
-<tscreen><verb>
-negateInteger#	:: Int# -> ByteArray# -> Integer
-
-{plus,minus,times}Integer# :: Int# -> ByteArray#
-			   -> Int# -> ByteArray#
-			   -> Integer
-
-cmpInteger# :: Int# -> ByteArray#
-	    -> Int# -> ByteArray#
-	    -> Int# -- -1 for <; 0 for ==; +1 for >
-
-divModInteger#, quotRemInteger#
-	:: Int# -> ByteArray#
-	-> Int# -> ByteArray#
-	-> PrelNum.Return2GMPs
-
-integer2Int# :: Int# -> ByteArray# -> Int# 
-
-int2Integer#  :: Int#  -> Integer -- NB: no error-checking on these two!
-word2Integer# :: Word# -> Integer
-
-addr2Integer# :: Addr# -> Integer
-	-- the Addr# is taken to be a `char *' string
-	-- to be converted into an Integer.
-</verb></tscreen>
-<ncdx>negateInteger#</ncdx>
-<ncdx>plusInteger#</ncdx>
-<ncdx>minusInteger#</ncdx>
-<ncdx>timesInteger#</ncdx>
-<ncdx>cmpInteger#</ncdx>
-<ncdx>divModInteger#</ncdx>
-<ncdx>quotRemInteger#</ncdx>
-<ncdx>integer2Int#</ncdx>
-<ncdx>int2Integer#</ncdx>
-<ncdx>word2Integer#</ncdx>
-<ncdx>addr2Integer#</ncdx>
-
-<sect2>Words and addresses
-<p>
-<nidx>word, primitive type</nidx>
-<nidx>address, primitive type</nidx>
-<nidx>unsigned integer, primitive type</nidx>
-<nidx>pointer, primitive type</nidx>
-
-A @Word#@ is used for bit-twiddling operations.  It is the same size as
-an @Int#@, but has no sign nor any arithmetic operations.
-<tscreen><verb>
-type Word#	-- Same size/etc as Int# but *unsigned*
-type Addr#	-- A pointer from outside the "Haskell world" (from C, probably);
-		-- described under "arrays"
-
-</verb></tscreen>
-<ncdx>Word#</ncdx>
-<ncdx>Addr#</ncdx>
-
-@Word#@s and @Addr#@s have the usual comparison operations.
-Other unboxed-@Word@ ops (bit-twiddling and coercions):
-
-<tscreen><verb>
-and#, or#, xor# :: Word# -> Word# -> Word#
-	-- standard bit ops.
-
-quotWord#, remWord# :: Word# -> Word# -> Word#
-	-- word (i.e. unsigned) versions are different from int
-	-- versions, so we have to provide these explicitly.
-
-not# :: Word# -> Word#
-
-shiftL#, shiftRA#, shiftRL# :: Word# -> Int# -> Word#
-	-- shift left, right arithmetic, right logical
-
-int2Word#	:: Int#  -> Word# -- just a cast, really
-word2Int#	:: Word# -> Int#
-</verb></tscreen>
-<nidx>bit operations, Word and Addr</nidx>
-<ncdx>and#</ncdx>
-<ncdx>or#</ncdx>
-<ncdx>xor#</ncdx>
-<ncdx>not#</ncdx>
-<ncdx>quotWord#</ncdx>
-<ncdx>remWord#</ncdx>
-<ncdx>shiftL#</ncdx>
-<ncdx>shiftRA#</ncdx>
-<ncdx>shiftRL#</ncdx>
-<ncdx>int2Word#</ncdx>
-<ncdx>word2Int#</ncdx>
-
-Unboxed-@Addr@ ops (C casts, really):
-<tscreen><verb>
-int2Addr#	:: Int#  -> Addr#
-addr2Int#	:: Addr# -> Int#
-</verb></tscreen>
-<ncdx>int2Addr#</ncdx>
-<ncdx>addr2Int#</ncdx>
-
-The casts between @Int#@, @Word#@ and @Addr#@ correspond to null
-operations at the machine level, but are required to keep the Haskell
-type checker happy.
-
-Operations for indexing off of C pointers (@Addr#@s) to snatch values
-are listed under ``arrays''.
-
-<sect2>Arrays
-<p>
-<nidx>arrays, primitive</nidx>
-
-The type @Array# elt@ is the type of primitive, unpointed arrays of
-values of type @elt@.
-
-<tscreen><verb>
-type Array# elt
-</verb></tscreen>
-<ncdx>Array#</ncdx>
-
-@Array#@ is more primitive than a Haskell array --- indeed, the
-Haskell @Array@ interface is implemented using @Array#@ --- in that an
-@Array#@ is indexed only by @Int#@s, starting at zero.  It is also
-more primitive by virtue of being unboxed.  That doesn't mean that it
-isn't a heap-allocated object - of course, it is.  Rather, being
-unboxed means that it is represented by a pointer to the array itself,
-and not to a thunk which will evaluate to the array (or to bottom).
-The components of an @Array#@ are themselves boxed.
-
-The type @ByteArray#@ is similar to @Array#@, except that it contains
-just a string of (non-pointer) bytes.
-
-<tscreen><verb>
-type ByteArray#
-</verb></tscreen>
-<ncdx>ByteArray#</ncdx>
-
-Arrays of these types are useful when a Haskell program wishes to
-construct a value to pass to a C procedure. It is also possible to
-use them to build (say) arrays of unboxed characters for internal use
-in a Haskell program.  Given these uses, @ByteArray#@ is deliberately
-a bit vague about the type of its components.  Operations are provided
-to extract values of type @Char#@, @Int#@, @Float#@, @Double#@, and
-@Addr#@ from arbitrary offsets within a @ByteArray#@.  (For type
-@Foo#@, the $i$th offset gets you the $i$th @Foo#@, not the @Foo#@ at
-byte-position $i$.  Mumble.)  (If you want a @Word#@, grab an @Int#@,
-then coerce it.)
-
-Lastly, we have static byte-arrays, of type @Addr#@ [mentioned
-previously].  (Remember the duality between arrays and pointers in C.)
-Arrays of this types are represented by a pointer to an array in the
-world outside Haskell, so this pointer is not followed by the garbage
-collector.  In other respects they are just like @ByteArray#@.  They
-are only needed in order to pass values from C to Haskell.
-
-<sect2>Reading and writing
-<p>
-
-Primitive arrays are linear, and indexed starting at zero.
-
-The size and indices of a @ByteArray#@, @Addr#@, and
-@MutableByteArray#@ are all in bytes.  It's up to the program to
-calculate the correct byte offset from the start of the array.  This
-allows a @ByteArray#@ to contain a mixture of values of different
-type, which is often needed when preparing data for and unpicking
-results from C.  (Umm... not true of indices... WDP 95/09)
-
-<em>Should we provide some @sizeOfDouble#@ constants?</em>
-
-Out-of-range errors on indexing should be caught by the code which
-uses the primitive operation; the primitive operations themselves do
-<em>not</em> check for out-of-range indexes. The intention is that the
-primitive ops compile to one machine instruction or thereabouts.
-
-We use the terms ``reading'' and ``writing'' to refer to accessing
-<em>mutable</em> arrays (see Section~<ref name="Mutable arrays" id="sect:mutable">), and
-``indexing'' to refer to reading a value from an <em>immutable</em>
-array.
-
-Immutable byte arrays are straightforward to index (all indices in bytes):
-<tscreen><verb>
-indexCharArray#   :: ByteArray# -> Int# -> Char#
-indexIntArray#    :: ByteArray# -> Int# -> Int#
-indexAddrArray#   :: ByteArray# -> Int# -> Addr#
-indexFloatArray#  :: ByteArray# -> Int# -> Float#
-indexDoubleArray# :: ByteArray# -> Int# -> Double#
-
-indexCharOffAddr#   :: Addr# -> Int# -> Char#
-indexIntOffAddr#    :: Addr# -> Int# -> Int#
-indexFloatOffAddr#  :: Addr# -> Int# -> Float#
-indexDoubleOffAddr# :: Addr# -> Int# -> Double#
-indexAddrOffAddr#   :: Addr# -> Int# -> Addr#	
- -- Get an Addr# from an Addr# offset
-</verb></tscreen>
-<ncdx>indexCharArray#</ncdx>
-<ncdx>indexIntArray#</ncdx>
-<ncdx>indexAddrArray#</ncdx>
-<ncdx>indexFloatArray#</ncdx>
-<ncdx>indexDoubleArray#</ncdx>
-<ncdx>indexCharOffAddr#</ncdx>
-<ncdx>indexIntOffAddr#</ncdx>
-<ncdx>indexFloatOffAddr#</ncdx>
-<ncdx>indexDoubleOffAddr#</ncdx>
-<ncdx>indexAddrOffAddr#</ncdx>
-
-The last of these, @indexAddrOffAddr#@, extracts an @Addr#@ using an offset
-from another @Addr#@, thereby providing the ability to follow a chain of
-C pointers.
-
-Something a bit more interesting goes on when indexing arrays of boxed
-objects, because the result is simply the boxed object. So presumably
-it should be entered --- we never usually return an unevaluated
-object!  This is a pain: primitive ops aren't supposed to do
-complicated things like enter objects.  The current solution is to
-return a single element unboxed tuple (see Section <ref name="Unboxed
-Tuples" id="unboxed-tuples">).
-
-<tscreen><verb>
-indexArray#       :: Array# elt -> Int# -> (# elt #)
-</verb></tscreen>
-<ncdx>indexArray#</ncdx>
-
-
-<sect2>The state type
-<p>
-<ncdx>state, primitive type</ncdx>
-<ncdx>State#</ncdx>
-
-The primitive type @State#@ represents the state of a state
-transformer.  It is parameterised on the desired type of state, which
-serves to keep states from distinct threads distinct from one another.
-But the <em>only</em> effect of this parameterisation is in the type
-system: all values of type @State#@ are represented in the same way.
-Indeed, they are all represented by nothing at all!  The code
-generator ``knows'' to generate no code, and allocate no registers
-etc, for primitive states.
-
-<tscreen><verb>
-type State# s
-</verb></tscreen>
-
-The type @GHC.RealWorld@ is truly opaque: there are no values defined
-of this type, and no operations over it.  It is ``primitive'' in that
-sense - but it is <em>not unlifted!</em> Its only role in life is to be
-the type which distinguishes the @IO@ state transformer.
-
-<tscreen><verb>
-data RealWorld
-</verb></tscreen>
-
-<sect2>State of the world
-<p>
-
-A single, primitive, value of type @State# RealWorld@ is provided.
-
-<tscreen><verb>
-realWorld# :: State# RealWorld
-</verb></tscreen>
-<nidx>realWorld# state object</nidx>
-
-(Note: in the compiler, not a @PrimOp@; just a mucho magic
-@Id@. Exported from @GHC@, though).
-
-<sect2>Mutable arrays
-<p>
-<label id="sect:mutable">
-<nidx>mutable arrays</nidx>
-<nidx>arrays, mutable</nidx>
-
-Corresponding to @Array#@ and @ByteArray#@, we have the types of
-mutable versions of each.  In each case, the representation is a
-pointer to a suitable block of (mutable) heap-allocated storage.
-
-<tscreen><verb>
-type MutableArray# s elt
-type MutableByteArray# s
-</verb></tscreen>
-<ncdx>MutableArray#</ncdx>
-<ncdx>MutableByteArray#</ncdx>
-
-<sect3>Allocation
-<p>
-<nidx>mutable arrays, allocation</nidx>
-<nidx>arrays, allocation</nidx>
-<nidx>allocation, of mutable arrays</nidx>
-
-Mutable arrays can be allocated. Only pointer-arrays are initialised;
-arrays of non-pointers are filled in by ``user code'' rather than by
-the array-allocation primitive.  Reason: only the pointer case has to
-worry about GC striking with a partly-initialised array.
-
-<tscreen><verb>
-newArray#       :: Int# -> elt -> State# s -> (# State# s, MutableArray# s elt #) 
-
-newCharArray#   :: Int# -> State# s -> (# State# s, MutableByteArray# s elt #)
-newIntArray#    :: Int# -> State# s -> (# State# s, MutableByteArray# s elt #)
-newAddrArray#   :: Int# -> State# s -> (# State# s, MutableByteArray# s elt #)
-newFloatArray#  :: Int# -> State# s -> (# State# s, MutableByteArray# s elt #)
-newDoubleArray# :: Int# -> State# s -> (# State# s, MutableByteArray# s elt #)
-</verb></tscreen>
-<ncdx>newArray#</ncdx>
-<ncdx>newCharArray#</ncdx>
-<ncdx>newIntArray#</ncdx>
-<ncdx>newAddrArray#</ncdx>
-<ncdx>newFloatArray#</ncdx>
-<ncdx>newDoubleArray#</ncdx>
-
-The size of a @ByteArray#@ is given in bytes.
-
-<sect3>Reading and writing
-<p>
-<nidx>arrays, reading and writing</nidx>
-
-<tscreen><verb>
-readArray#       :: MutableArray# s elt -> Int# -> State# s -> (# State# s, elt #)
-readCharArray#   :: MutableByteArray# s -> Int# -> State# s -> (# State# s, Char# #)
-readIntArray#    :: MutableByteArray# s -> Int# -> State# s -> (# State# s, Int# #)
-readAddrArray#	 :: MutableByteArray# s -> Int# -> State# s -> (# State# s, Addr# #)
-readFloatArray#  :: MutableByteArray# s -> Int# -> State# s -> (# State# s, Float# #)
-readDoubleArray# :: MutableByteArray# s -> Int# -> State# s -> (# State# s, Double# #)
-
-writeArray#       :: MutableArray# s elt -> Int# -> elt     -> State# s -> State# s 
-writeCharArray#   :: MutableByteArray# s -> Int# -> Char#   -> State# s -> State# s 
-writeIntArray#    :: MutableByteArray# s -> Int# -> Int#    -> State# s -> State# s 
-writeAddrArray#   :: MutableByteArray# s -> Int# -> Addr#   -> State# s -> State# s 
-writeFloatArray#  :: MutableByteArray# s -> Int# -> Float#  -> State# s -> State# s 
-writeDoubleArray# :: MutableByteArray# s -> Int# -> Double# -> State# s -> State# s 
-</verb></tscreen>
-<ncdx>readArray#</ncdx>
-<ncdx>readCharArray#</ncdx>
-<ncdx>readIntArray#</ncdx>
-<ncdx>readAddrArray#</ncdx>
-<ncdx>readFloatArray#</ncdx>
-<ncdx>readDoubleArray#</ncdx>
-<ncdx>writeArray#</ncdx>
-<ncdx>writeCharArray#</ncdx>
-<ncdx>writeIntArray#</ncdx>
-<ncdx>writeAddrArray#</ncdx>
-<ncdx>writeFloatArray#</ncdx>
-<ncdx>writeDoubleArray#</ncdx>
-
-
-<sect3>Equality
-<p>
-<nidx>arrays, testing for equality</nidx>
-
-One can take ``equality'' of mutable arrays.  What is compared is the
-<em>name</em> or reference to the mutable array, not its contents.
-
-<tscreen><verb>
-sameMutableArray#     :: MutableArray# s elt -> MutableArray# s elt -> Bool
-sameMutableByteArray# :: MutableByteArray# s -> MutableByteArray# s -> Bool
-</verb></tscreen>
-<ncdx>sameMutableArray#</ncdx>
-<ncdx>sameMutableByteArray#</ncdx>
-
-<sect3>Freezing mutable arrays
-<p>
-<nidx>arrays, freezing mutable</nidx>
-<nidx>freezing mutable arrays</nidx>
-<nidx>mutable arrays, freezing</nidx>
-
-Only unsafe-freeze has a primitive.  (Safe freeze is done directly in Haskell 
-by copying the array and then using @unsafeFreeze@.) 
-
-<tscreen><verb>
-unsafeFreezeArray#     :: MutableArray# s elt -> State# s -> (# State# s, Array# s elt #)
-unsafeFreezeByteArray# :: MutableByteArray# s -> State# s -> (# State# s, ByteArray# #)
-</verb></tscreen>
-<ncdx>unsafeFreezeArray#</ncdx>
-<ncdx>unsafeFreezeByteArray#</ncdx>
-
-<sect2>Stable pointers
-<p>
-<nidx>stable pointers</nidx>
-<nidx>pointers, stable</nidx>
-
-A stable pointer is a name for a Haskell object which can be passed to
-the external world.  It is ``stable'' in the sense that the name does
-not change when the Haskell garbage collector runs --- in contrast to
-the address of the object which may well change.
-
-The stable pointer type is parameterised by the type of the thing
-which is named.
-
-<tscreen><verb>
-type StablePtr# a
-</verb></tscreen>
-<ncdx>StablePtr#</ncdx>
-
-A stable pointer is represented by an index into the (static)
-@StablePointerTable@.  The Haskell garbage collector treats the
-@StablePointerTable@ as a source of roots for GC.
-
-The @makeStablePointer@ function converts a value into a stable
-pointer.  It is part of the @IO@ monad, because we want to be sure
-we don't allocate one twice by accident, and then only free one of the
-copies.
-
-<tscreen><verb>
-makeStablePointer#  :: a -> State# RealWorld -> (# State# RealWord, StablePtr# a #)
-freeStablePointer#  :: StablePtr# a -> State# RealWorld -> State# RealWorld
-deRefStablePointer# :: StablePtr# a -> State# RealWorld -> (# State# RealWorld, a #)
-</verb></tscreen>
-<ncdx>makeStablePointer#</ncdx>
-<ncdx>freeStablePointer#</ncdx>
-<ncdx>deRefStablePointer#</ncdx>
-
-There is also a C procedure @FreeStablePtr@ which frees a stable pointer.
-
-%<em>Andy's comment.</em> {\bf Errors:} The following is not strictly true: the current
-%implementation is not as polymorphic as claimed.  The reason for this
-%is that the C programmer will have to use a different entry-routine
-%for each type of stable pointer.  At present, we only supply a very
-%limited number (3) of these routines.  It might be possible to
-%increase the range of these routines by providing general purpose
-%entry points to apply stable pointers to (stable pointers to)
-%arguments and to enter (stable pointers to) boxed primitive values.
-%<em>End of Andy's comment.</em>
-
-<sect2>Foreign objects
-<p>
-<nidx>Foreign objects</nidx>
-
-A @ForeignObj#@ is a reference to an object outside the Haskell world
-(i.e., from the C world, or a reference to an object on another
-machine completely.), where the Haskell world has been told ``Let me
-know when you're finished with this ...''.
-
-<tscreen><verb>
-type ForeignObj#
-</verb></tscreen>
-<ncdx>ForeignObj#</ncdx>
-
-GHC provides two primitives on @ForeignObj#@:
-
-<tscreen><verb>
-makeForeignObj# 
-	:: Addr# -- foreign reference
-        -> Addr# -- pointer to finalisation routine
-	-> (# State# RealWorld, ForeignObj# )
-writeForeignObj 
-	:: ForeignObj#        -- foreign object
-	-> Addr#              -- datum
-	-> State# RealWorld
-	-> State# RealWorld
-</verb></tscreen>
-<ncdx>makeForeignObj#</ncdx>
-<ncdx>writeForeignObj#</ncdx>
-
-The module @Foreign@ (see library documentation) provides a more
-programmer-friendly interface to foreign objects.
-
-<sect2>Synchronizing variables (M-vars)
-<p>
-<nidx>synchronising variables (M-vars)</nidx>
-<nidx>M-Vars</nidx>
-
-Synchronising variables are the primitive type used to implement
-Concurrent Haskell's MVars (see the Concurrent Haskell paper for
-the operational behaviour of these operations).
-
-<tscreen><verb>
-type MVar# s elt	-- primitive
-
-newMVar#    :: State# s -> (# State# s, MVar# s elt #)
-takeMVar#   :: SynchVar# s elt -> State# s -> (# State# s, elt #)
-putMVar#    :: SynchVar# s elt -> State# s -> State# s
-</verb></tscreen>
-<ncdx>SynchVar#</ncdx>
-<ncdx>newSynchVar#</ncdx>
-<ncdx>takeMVar</ncdx>
-<ncdx>putMVar</ncdx>
diff --git a/ghc/docs/users_guide/parallel.vsgml b/ghc/docs/users_guide/parallel.vsgml
deleted file mode 100644
index 7b077b2..0000000
--- a/ghc/docs/users_guide/parallel.vsgml
+++ /dev/null
@@ -1,152 +0,0 @@
-% both concurrent and parallel
-%************************************************************************
-%*                                                                      *
-<sect1>Concurrent and Parallel Haskell
-<label id="concurrent-and-parallel">
-<p>
-<nidx>Concurrent Haskell</nidx>
-<nidx>Parallel Haskell</nidx>
-%*                                                                      *
-%************************************************************************
-
-Concurrent and Parallel Haskell are Glasgow extensions to Haskell
-which let you structure your program as a group of independent
-`threads'.
-
-Concurrent and Parallel Haskell have very different purposes.
-
-Concurrent Haskell is for applications which have an inherent
-structure of interacting, concurrent tasks (i.e. `threads').  Threads
-in such programs may be <em>required</em>.  For example, if a concurrent
-thread has been spawned to handle a mouse click, it isn't
-optional---the user wants something done!
-
-A Concurrent Haskell program implies multiple `threads' running within
-a single Unix process on a single processor.
-
-You will find at least one paper about Concurrent Haskell hanging off
-of <url name="Simon Peyton Jones's Web page"
-url="http://www.dcs.gla.ac.uk/~simonpj/">.
-
-Parallel Haskell is about <em>speed</em>---spawning threads onto multiple
-processors so that your program will run faster.  The `threads'
-are always <em>advisory</em>---if the runtime system thinks it can
-get the job done more quickly by sequential execution, then fine.
-
-A Parallel Haskell program implies multiple processes running on
-multiple processors, under a PVM (Parallel Virtual Machine) framework.
-
-Parallel Haskell is still relatively new; it is more about ``research
-fun'' than about ``speed.'' That will change.
-
-Again, check Simon's Web page for publications about Parallel Haskell
-(including ``GUM'', the key bits of the runtime system).
-
-Some details about Parallel Haskell follow.  For more information
-about concurrent Haskell, see the Concurrent section in the <htmlurl
-name="GHC/Hugs Extension Libraries" url="libs.html"> documentation.
-
-%************************************************************************
-%*                                                                      *
-<sect2>Features specific to Parallel Haskell
-<nidx>Parallel Haskell---features</nidx>
-<p>
-%*                                                                      *
-%************************************************************************
-
-%************************************************************************
-%*                                                                      *
-<sect3>The @Parallel@ interface (recommended)
-<nidx>Parallel interface</nidx>
-<p>
-%*                                                                      *
-%************************************************************************
-
-GHC provides two functions for controlling parallel execution, through
-the @Parallel@ interface:
-
-<tscreen><verb>
-interface Parallel where
-infixr 0 `par`
-infixr 1 `seq`
-
-par :: a -> b -> b
-seq :: a -> b -> b
-</verb></tscreen>
-
-The expression @(x `par` y)@ <em>sparks</em> the evaluation of @x@
-(to weak head normal form) and returns @y@.  Sparks are queued for
-execution in FIFO order, but are not executed immediately.  At the
-next heap allocation, the currently executing thread will yield
-control to the scheduler, and the scheduler will start a new thread
-(until reaching the active thread limit) for each spark which has not
-already been evaluated to WHNF.
-
-The expression @(x `seq` y)@ evaluates @x@ to weak head normal
-form and then returns @y@.  The @seq@ primitive can be used to
-force evaluation of an expression beyond WHNF, or to impose a desired
-execution sequence for the evaluation of an expression.
-
-For example, consider the following parallel version of our old
-nemesis, @nfib@:
-
-<tscreen><verb>
-import Parallel
-
-nfib :: Int -> Int
-nfib n | n <= 1 = 1
-       | otherwise = par n1 (seq n2 (n1 + n2 + 1))
-                     where n1 = nfib (n-1) 
-                           n2 = nfib (n-2)
-</verb></tscreen>
-
-For values of @n@ greater than 1, we use @par@ to spark a thread
-to evaluate @nfib (n-1)@, and then we use @seq@ to force the
-parent thread to evaluate @nfib (n-2)@ before going on to add
-together these two subexpressions.  In this divide-and-conquer
-approach, we only spark a new thread for one branch of the computation
-(leaving the parent to evaluate the other branch).  Also, we must use
-@seq@ to ensure that the parent will evaluate @n2@ <em>before</em>
-@n1@ in the expression @(n1 + n2 + 1)@.  It is not sufficient to
-reorder the expression as @(n2 + n1 + 1)@, because the compiler may
-not generate code to evaluate the addends from left to right.
-
-%************************************************************************
-%*                                                                      *
-<sect3>Underlying functions and primitives
-<nidx>parallelism primitives</nidx>
-<nidx>primitives for parallelism</nidx>
-<p>
-%*                                                                      *
-%************************************************************************
-
-The functions @par@ and @seq@ are wired into GHC, and unfold
-into uses of the @par#@ and @seq#@ primitives, respectively.  If
-you'd like to see this with your very own eyes, just run GHC with the
-@-ddump-simpl@ option.  (Anything for a good time...)
-
-%************************************************************************
-%*                                                                      *
-<sect3>Scheduling policy for concurrent/parallel threads
-<nidx>Scheduling---concurrent/parallel</nidx>
-<nidx>Concurrent/parallel scheduling</nidx>
-<p>
-%*                                                                      *
-%************************************************************************
-
-Runnable threads are scheduled in round-robin fashion.  Context
-switches are signalled by the generation of new sparks or by the
-expiry of a virtual timer (the timer interval is configurable with the
-@-C[<num>]@<nidx>-C&lt;num&gt; RTS option (concurrent,
-parallel)</nidx> RTS option).  However, a context switch doesn't
-really happen until the current heap block is full.  You can't get any
-faster context switching than this.
-
-When a context switch occurs, pending sparks which have not already
-been reduced to weak head normal form are turned into new threads.
-However, there is a limit to the number of active threads (runnable or
-blocked) which are allowed at any given time.  This limit can be
-adjusted with the @-t<num>@<nidx>-t &lt;num&gt; RTS option (concurrent, parallel)</nidx>
-RTS option (the default is 32).  Once the
-thread limit is reached, any remaining sparks are deferred until some
-of the currently active threads are completed.
diff --git a/ghc/docs/users_guide/posix.vsgml b/ghc/docs/users_guide/posix.vsgml
deleted file mode 100644
index 44eb171..0000000
--- a/ghc/docs/users_guide/posix.vsgml
+++ /dev/null
@@ -1,1441 +0,0 @@
-%************************************************************************
-%*                                                                      *
-<sect1>The Posix library
-<label id="Posix-library">
-<p>
-<nidx>Posix library</nidx>
-<nidx>libraries, Posix</nidx>
-%*                                                                      *
-%************************************************************************
-
-The @Posix@ interface gives you access to the set of OS services
-standardised by POSIX 1003.1b (or the <em>IEEE Portable Operating System
-Interface for Computing Environments</em> - IEEE Std. 1003.1). The
-interface is accessed by @import Posix@ and adding 
-@-syslib posix@ on your command-line.
-
-<sect2>Posix data types
-<label id="Posix data types">
-<p>
-<nidx>Posix, data types</nidx>
-
-
-<tscreen><verb>
-data ByteCount  -- instances of : Eq Ord Num Real Integral Ix Enum Show
-</verb></tscreen>
-
-A @ByteCount@ is a primitive of type @unsigned@. At a minimum,
-an conforming implementation must support values in the range
-@[0, UINT_MAX]@.
-
-<tscreen><verb>
-data ClockTick  -- instances of : Eq Ord Num Real Integral Ix Enum Show
-</verb></tscreen>
-
-A @ClockTick@ is a primitive of type @clock_t@, which
-is used to measure intervals of time in fractions of a second.  The 
-resolution is determined by @getSysVar ClockTick@.
-
-<tscreen><verb>
-data DeviceID  -- instances of : Eq Ord Num Real Integral Ix Enum Show
-</verb></tscreen>
-
-A @DeviceID@ is a primitive of type @dev_t@.  It must
-be an arithmetic type.
-
-<tscreen><verb>
-data EpochTime -- instances of : Eq Ord Num Real Integral Ix Enum Show
-</verb></tscreen>
-
-A @EpochTime@ is a primitive of type @time_t@, which is
-used to measure seconds since the Epoch.  At a minimum, the implementation 
-must support values in the range @[0, INT_MAX]@.
-
-<tscreen><verb>
-data FileID -- instances of : Eq Ord Num Real Integral Ix Enum Show
-</verb></tscreen>
-
-A @FileID@ is a primitive of type @ino_t@.  It must
-be an arithmetic type.
-
-<tscreen><verb>
-data FileMode -- instances of : Eq Ord Num Real Integral Ix Enum Show
-</verb></tscreen>
-
-A @FileMode@ is a primitive of type @mode_t@.
-It must be an arithmetic type.
-
-<tscreen><verb>
-data FileOffset -- instances of : Eq Ord Num Real Integral Ix Enum Show
-</verb></tscreen>
-
-A @FileOffset@ is a primitive of type @off_t@.  It must
-be an arithmetic type.
-
-<tscreen><verb>
-data GroupID -- instances of : Eq Ord Num Real Integral Ix Enum Show
-</verb></tscreen>
-
-A @GroupID@ is a primitive of type @gid_t@.  It must
-be an arithmetic type.
-<tscreen><verb>
-data Limit -- instances of : Eq Ord Num Real Integral Ix Enum Show
-</verb></tscreen>
-
-A @Limit@ is a primitive of type @long@.
-At a minimum, the implementation must support values in the range 
-@[LONG_MIN, LONG_MAX]@.
-
-<tscreen><verb>
-data LinkCount -- instances of : Eq Ord Num Real Integral Ix Enum Show
-</verb></tscreen>
-
-A @LinkCount@ is a primitive of type @nlink_t@.  It must
-be an arithmetic type.
-
-<tscreen><verb>
-data ProcessID -- instances of : Eq Ord Num Real Integral Ix Enum Show
-type ProcessGroupID = ProcessID
-</verb></tscreen>
-
-A @ProcessID@ is a primitive of type @pid_t@.  It
-must be a signed arithmetic type.
-<tscreen><verb>
-data UserID -- instances of : Eq Ord Num Real Integral Ix Enum Show
-</verb></tscreen>
-
-A @UserID@ is a primitive of type @uid_t@.  It
-must be an arithmetic type.
-
-<tscreen><verb>
-data DirStream
-</verb></tscreen>
-A @DirStream@ is a primitive of type @DIR *@.
-
-<tscreen><verb>
-data FileStatus
-</verb></tscreen>
-A @FileStatus@ is a primitive of type @struct stat@.
-
-<tscreen><verb>
-data GroupEntry
-</verb></tscreen>
-
-A @GroupEntry@ is a primitive of type @struct group@.
-<tscreen><verb>
-data ProcessTimes
-</verb></tscreen>
-
-@ProcessTimes@ is a primitive structure containing a
-@clock_t@ and a @struct tms@.
-
-<tscreen><verb>
-data SignalSet
-</verb></tscreen>
-
-An @SignalSet@ is a primitive of type @sigset_t@.
-
-<tscreen><verb>
-data SystemID
-</verb></tscreen>
-
-A @SystemID@ is a primitive of type @struct utsname@.
-
-<tscreen><verb>
-data TerminalAttributes
-</verb></tscreen>
-@TerminalAttributes@ is a primitive of type @struct termios@.
-
-<tscreen><verb>
-data UserEntry
-</verb></tscreen>
-
-A @UserEntry@ is a primitive of type @struct passwd@.
-
-<tscreen><verb>
-data BaudRate = B0 | B50 | B75 | B110 | B134 | B150 | B200 | B300 | B600
-              | B1200 | B1800 | B2400 | B4800 | B9600 | B19200 | B38400
-              deriving (Eq, Show)
-
-data Fd 
-
-intToFd :: Int -> Fd -- use with care.
-
-data FdOption = AppendOnWrite
-              | CloseOnExec
-              | NonBlockingRead
-
-data ControlCharacter = EndOfFile
-                      | EndOfLine
-                      | Erase
-                      | Interrupt
-                      | Kill
-                      | Quit
-                      | Suspend
-                      | Start
-                      | Stop
-
-type ErrorCode = Int
-
-type FileLock = (LockRequest, SeekMode, FileOffset, FileOffset)
---                            whence    start       length
-
-data FlowAction = SuspendOutput | RestartOutput | TransmitStop | TransmitStart
-
-data Handler = Default | Ignore | Catch (IO ())
-
-data LockRequest = ReadLock | WriteLock | Unlock
-                 deriving (Eq, Show)
-
-data OpenMode = ReadOnly | WriteOnly | ReadWrite
-
-data PathVar = LinkLimit
-             | InputLineLimit
-             | InputQueueLimit
-             | FileNameLimit
-             | PathNameLimit
-             | PipeBufferLimit
-             | SetOwnerAndGroupIsRestricted
-             | FileNamesAreNotTruncated
-
-data QueueSelector = InputQueue | OutputQueue | BothQueues
-
-type Signal = Int
-
-data SysVar = ArgumentLimit
-            | ChildLimit
-            | ClockTick
-            | GroupLimit
-            | OpenFileLimit
-            | PosixVersion
-            | HasSavedIDs
-            | HasJobControl
-
-data TerminalMode = InterruptOnBreak       -- BRKINT
-                | MapCRtoLF                -- ICRNL
-                | IgnoreBreak              -- IGNBRK
-                | IgnoreCR                 -- IGNCR
-                | IgnoreParityErrors       -- IGNPAR
-                | MapLFtoCR                -- INLCR
-                | CheckParity              -- INPCK
-                | StripHighBit             -- ISTRIP
-                | StartStopInput           -- IXOFF
-                | StartStopOutput          -- IXON
-                | MarkParityErrors         -- PARMRK
-                | ProcessOutput            -- OPOST
-                | LocalMode                -- CLOCAL
-                | ReadEnable               -- CREAD
-                | TwoStopBits              -- CSTOPB
-                | HangupOnClose            -- HUPCL
-                | EnableParity             -- PARENB
-                | OddParity                -- PARODD
-                | EnableEcho               -- ECHO
-                | EchoErase                -- ECHOE
-                | EchoKill                 -- ECHOK
-                | EchoLF                   -- ECHONL
-                | ProcessInput             -- ICANON
-                | ExtendedFunctions        -- IEXTEN
-                | KeyboardInterrupts       -- ISIG
-                | NoFlushOnInterrupt       -- NOFLSH
-                | BackgroundWriteInterrupt -- TOSTOP
-
-data TerminalState = Immediately | WhenDrained | WhenFlushed
-
-data ProcessStatus = Exited ExitCode 
-                   | Terminated Signal 
-                   | Stopped Signal
-                   deriving (Eq, Show)
-</verb></tscreen>
-
-<sect2>Posix Process Primitives
-<label id="Process Primitives">
-<p>
-
-<tscreen><verb>
-forkProcess :: IO (Maybe ProcessID)
-</verb></tscreen>
-
-@forkProcess@ calls @fork@, returning
-@Just pid@ to the parent, where @pid@ is the
-ProcessID of the child, and returning @Nothing@ to the
-child.
-
-<tscreen><verb>
-executeFile :: FilePath                   -- Command
-            -> Bool                       -- Search PATH?
-            -> [String]                   -- Arguments
-            -> Maybe [(String, String)]   -- Environment
-            -> IO ()
-</verb></tscreen>
-
-@executeFile cmd args env@ calls one of the
-@execv*@ family, depending on whether or not the current
-PATH is to be searched for the command, and whether or not an
-environment is provided to supersede the process's current
-environment.  The basename (leading directory names suppressed) of
-the command is passed to @execv*@ as @arg[0]@;
-the argument list passed to @executeFile@ therefore begins 
-with @arg[1]@.
-
-<tscreen><verb>
-Search PATH?    Supersede environ?      Call
-~~~~~~~~~~~~    ~~~~~~~~~~~~~~~~~~      ~~~~~~~
-False           False                   execv
-False           True                    execve
-True            False                   execvp
-True            True                    execvpe*
-</verb></tscreen>
-
-Note that @execvpe@ is not provided by the POSIX standard, and must
-be written by hand.  Care must be taken to ensure that the search path
-is extracted from the original environment, and not from the
-environment to be passed on to the new image.
-
-NOTE: In general, sharing open files between parent and child
-processes is potential bug farm, and should be avoided unless you
-really depend on this `feature' of POSIX' @fork()@ semantics. Using
-Haskell, there's the extra complication that arguments to
-@executeFile@ might come from files that are read lazily (using
-@hGetContents@, or some such.) If this is the case, then for your own
-sanity, please ensure that the arguments to @executeFile@ have been
-fully evaluated before calling @forkProcess@ (followed by
-@executeFile@.) Consider yourself warned :-)
-
-A successful @executeFile@ overlays the current process image with 
-a new one, so it only returns on failure.
-
-<tscreen><verb>
-runProcess :: FilePath                    -- Command
-           -> [String]                    -- Arguments
-           -> Maybe [(String, String)]    -- Environment (Nothing -> Inherited)
-           -> Maybe FilePath              -- Working directory (Nothing -> inherited)
-           -> Maybe Handle                -- stdin  (Nothing -> inherited)
-           -> Maybe Handle                -- stdout (Nothing -> inherited)
-           -> Maybe Handle                -- stderr (Nothing -> inherited)
-           -> IO ()
-</verb></tscreen>
-
-@runProcess@ is our candidate for the high-level OS-independent
-primitive.
-
-@runProcess cmd args env wd inhdl outhdl errhdl@ runs @cmd@
-(searching the current @PATH@) with arguments @args@.  If
-@env@ is @Just pairs@, the command is executed with the
-environment specified by @pairs@ of variables and values;
-otherwise, the command is executed with the current environment.  If
-@wd@ is @Just dir@, the command is executed with working
-directory @dir@; otherwise, the command is executed in the current
-working directory.  If @{in,out,err@hdl} is @Just handle@, the
-command is executed with the @Fd@ for @std{in,out,err@}
-attached to the specified @handle@; otherwise, the @Fd@ for
-@std{in,out,err@} is left unchanged.
-
-<tscreen><verb>
-getProcessStatus :: Bool              -- Block?
-                 -> Bool              -- Stopped processes?
-                 -> ProcessID 
-                 -> IO (Maybe ProcessStatus)
-</verb></tscreen>
-
-@getProcessStatus blk stopped pid@ calls @waitpid@, returning
-@Just tc@, the @ProcessStatus@ for process @pid@ if it is
-available, @Nothing@ otherwise.  If @blk@ is @False@, then
-@WNOHANG@ is set in the options for @waitpid@, otherwise not.
-If @stopped@ is @True@, then @WUNTRACED@ is set in the
-options for @waitpid@, otherwise not.
-
-<tscreen><verb>
-getGroupProcessStatus :: Bool         -- Block?
-                      -> Bool         -- Stopped processes?
-                      -> ProcessGroupID 
-                      -> IO (Maybe (ProcessID, ProcessStatus))
-</verb></tscreen>
-
-@getGroupProcessStatus blk stopped pgid@ calls @waitpid@,
-returning @Just (pid, tc)@, the @ProcessID@ and
-@ProcessStatus@ for any process in group @pgid@ if one is
-available, @Nothing@ otherwise.  If @blk@ is @False@, then
-@WNOHANG@ is set in the options for @waitpid@, otherwise not.
-If @stopped@ is @True@, then @WUNTRACED@ is set in the
-options for @waitpid@, otherwise not.
-
-<tscreen><verb>
-getAnyProcessStatus :: Bool           -- Block?
-                    -> Bool           -- Stopped processes?
-                    -> IO (Maybe (ProcessID, ProcessStatus))
-</verb></tscreen>
-
-@getAnyProcessStatus blk stopped@ calls @waitpid@, returning
-@Just (pid, tc)@, the @ProcessID@ and @ProcessStatus@ for any
-child process if one is available, @Nothing@ otherwise.  If
-@blk@ is @False@, then @WNOHANG@ is set in the options for
-@waitpid@, otherwise not.  If @stopped@ is @True@, then
-@WUNTRACED@ is set in the options for @waitpid@, otherwise not.
-
-<tscreen><verb>
-exitImmediately :: ExitCode -> IO ()
-</verb></tscreen>
-
-@exitImmediately status@ calls @_exit@ to terminate the process
-with the indicated exit @status@.
-The operation never returns.
-
-<tscreen><verb>
-getEnvironment :: IO [(String, String)]
-</verb></tscreen>
-
-@getEnvironment@ parses the environment variable mapping provided by
-@environ@, returning @(variable, value)@ pairs. 
-The operation never fails.
-
-<tscreen><verb>
-setEnvironment :: [(String, String)] -> IO ()
-</verb></tscreen>
-
-@setEnvironment@ replaces the process environment with the provided
-mapping of @(variable, value)@ pairs. 
-
-<tscreen><verb>
-getEnvVar :: String -> IO String
-</verb></tscreen>
-
-@getEnvVar var@ returns the value associated with variable @var@ 
-in the current environment (identical functionality provided through
-standard Haskell library function @System.getEnv@).
-
-The operation may fail with:
-
-<descrip>
-<tag>@NoSuchThing@</tag>
-The variable has no mapping in the current environment.
-</descrip>
-
-<tscreen><verb>
-setEnvVar :: String -> String -> IO ()
-</verb></tscreen>
-
-@setEnvVar var val@ sets the value associated with variable @var@ 
-in the current environment to be @val@.  Any previous mapping is 
-superseded.
-
-<tscreen><verb>
-removeEnvVar :: String -> IO ()
-</verb></tscreen>
-
-@removeEnvVar var@ removes any value associated with variable @var@ 
-in the current environment.  Deleting a variable for which there is no mapping
-does not generate an error.
-
-<tscreen><verb>
-nullSignal :: Signal
-nullSignal = 0
-
-backgroundRead, sigTTIN        :: Signal
-backgroundWrite, sigTTOU       :: Signal
-continueProcess, sigCONT       :: Signal
-floatingPointException, sigFPE :: Signal
-illegalInstruction, sigILL     :: Signal
-internalAbort, sigABRT         :: Signal
-keyboardSignal, sigINT         :: Signal
-keyboardStop, sigTSTP          :: Signal
-keyboardTermination, sigQUIT   :: Signal
-killProcess, sigKILL           :: Signal
-lostConnection, sigHUP         :: Signal
-openEndedPipe, sigPIPE         :: Signal
-processStatusChanged, sigCHLD  :: Signal
-realTimeAlarm, sigALRM         :: Signal
-segmentationViolation, sigSEGV :: Signal
-softwareStop, sigSTOP          :: Signal
-softwareTermination, sigTERM   :: Signal
-userDefinedSignal1, sigUSR1    :: Signal
-userDefinedSignal2, sigUSR2    :: Signal
-
-signalProcess :: Signal -> ProcessID -> IO ()
-</verb></tscreen>
-
-@signalProcess int pid@ calls @kill@ to signal 
-process @pid@ with interrupt signal @int@.
-
-<tscreen><verb>
-raiseSignal :: Signal -> IO ()
-</verb></tscreen>
-
-@raiseSignal int@ calls @kill@ to signal the current process
-with interrupt signal @int@. 
-
-<tscreen><verb>
-signalProcessGroup :: Signal -> ProcessGroupID -> IO ()
-</verb></tscreen>
-
-@signalProcessGroup int pgid@ calls @kill@ to signal 
-all processes in group @pgid@ with interrupt signal @int@.
-
-<tscreen><verb>
-setStoppedChildFlag :: Bool -> IO Bool
-</verb></tscreen>
-
-@setStoppedChildFlag bool@ sets a flag which controls whether or
-not the @NOCLDSTOP@ option will be used the next time a signal
-handler is installed for @SIGCHLD@.  If @bool@ is @True@ (the
-default), @NOCLDSTOP@ will not be used; otherwise it will be.  The
-operation never fails.
-
-<tscreen><verb>
-queryStoppedChildFlag :: IO Bool
-</verb></tscreen>
-
-@queryStoppedChildFlag@ queries the flag which
-controls whether or not the @NOCLDSTOP@ option will be used
-the next time a signal handler is installed for @SIGCHLD@.
-If @NOCLDSTOP@ will be used, it returns @False@; 
-otherwise (the default) it returns @True@.  
-The operation never fails.
-
-<tscreen><verb>
-emptySignalSet :: SignalSet
-fullSignalSet  :: SignalSet
-addSignal      :: Signal -> SignalSet -> SignalSet
-deleteSignal   :: Signal -> SignalSet -> SignalSet
-inSignalSet    :: Signal -> SignalSet -> Bool
-
-installHandler :: Signal
-               -> Handler 
-               -> Maybe SignalSet       -- other signals to block
-               -> IO Handler            -- old handler
-</verb></tscreen>
-
-@installHandler int handler iset@ calls @sigaction@ to install an
-interrupt handler for signal @int@.  If @handler@ is @Default@,
-@SIG_DFL@ is installed; if @handler@ is @Ignore@, @SIG_IGN@ is
-installed; if @handler@ is @Catch action@, a handler is installed
-which will invoke @action@ in a new thread when (or shortly after) the
-signal is received.  See Section <ref name="Concurrent Haskell"
-id="concurrent-haskell"> for details on how to communicate between
-threads.
-
-If @iset@ is @Just s@, then the @sa_mask@ of the @sigaction@ structure
-is set to @s@; otherwise it is cleared.  The previously installed
-signal handler for @int@ is returned.
-
-<tscreen><verb>
-getSignalMask :: IO SignalSet
-</verb></tscreen>
-
-@getSignalMask@ calls @sigprocmask@ to determine the
-set of interrupts which are currently being blocked.
-
-<tscreen><verb>
-setSignalMask :: SignalSet -> IO SignalSet
-</verb></tscreen>
-
-@setSignalMask mask@ calls @sigprocmask@ with
-@SIG_SETMASK@ to block all interrupts in @mask@.  The
-previous set of blocked interrupts is returned.
-
-<tscreen><verb>
-blockSignals :: SignalSet -> IO SignalSet
-</verb></tscreen>
-
-@setSignalMask mask@ calls @sigprocmask@ with
-@SIG_BLOCK@ to add all interrupts in @mask@ to the
-set of blocked interrupts.  The previous set of blocked interrupts is returned.
-
-<tscreen><verb>
-unBlockSignals :: SignalSet -> IO SignalSet
-</verb></tscreen>
-
-@setSignalMask mask@ calls @sigprocmask@ with
-@SIG_UNBLOCK@ to remove all interrupts in @mask@ from the
-set of blocked interrupts.  The previous set of blocked interrupts is returned.
-
-<tscreen><verb>
-getPendingSignals :: IO SignalSet
-</verb></tscreen>
-
-@getPendingSignals@ calls @sigpending@ to obtain
-the set of interrupts which have been received but are currently blocked.
-
-<tscreen><verb>
-awaitSignal :: Maybe SignalSet -> IO ()
-</verb></tscreen>
-
-@awaitSignal iset@ suspends execution until an interrupt is received.
-If @iset@ is @Just s@, @awaitSignal@ calls @sigsuspend@, installing
-@s@ as the new signal mask before suspending execution; otherwise, it
-calls @pause@.  @awaitSignal@ returns on receipt of a signal.  If you
-have installed any signal handlers with @installHandler@, it may be
-wise to call @yield@ directly after @awaitSignal@ to ensure that the
-signal handler runs as promptly.
-
-<tscreen><verb>
-scheduleAlarm :: Int -> IO Int
-</verb></tscreen>
-
-@scheduleAlarm i@ calls @alarm@ to schedule a real time
-alarm at least @i@ seconds in the future.
-
-<tscreen><verb>
-sleep :: Int -> IO ()
-</verb></tscreen>
-
-@sleep i@ calls @sleep@ to suspend execution of the
-program until at least @i@ seconds have elapsed or a signal is
-received.
-
-<sect2>Posix Process Environment
-<label id="Process Environment">
-<p>
-<nidx>Posix, process environment</nidx>
-
-<tscreen><verb>
-getProcessID :: IO ProcessID
-</verb></tscreen>
-
-@getProcessID@ calls @getpid@ to obtain the @ProcessID@ for
-the current process.
-
-<tscreen><verb>
-getParentProcessID :: IO ProcessID
-</verb></tscreen>
-
-@getProcessID@ calls @getppid@ to obtain the @ProcessID@ for
-the parent of the current process.
-
-<tscreen><verb>
-getRealUserID :: IO UserID
-</verb></tscreen>
-
-@getRealUserID@ calls @getuid@ to obtain the real @UserID@
-associated with the current process.
-
-<tscreen><verb>
-getEffectiveUserID :: IO UserID
-</verb></tscreen>
-
-@getRealUserID@ calls @geteuid@ to obtain the effective
-@UserID@ associated with the current process.
-
-<tscreen><verb>
-setUserID :: UserID -> IO ()
-</verb></tscreen>
-
-@setUserID uid@ calls @setuid@ to set the real, effective, and
-saved set-user-id associated with the current process to @uid@.
-
-<tscreen><verb>
-getLoginName :: IO String
-</verb></tscreen>
-
-@getLoginName@ calls @getlogin@ to obtain the login name
-associated with the current process.
-
-<tscreen><verb>
-getRealGroupID :: IO GroupID
-</verb></tscreen>
-
-@getRealGroupID@ calls @getgid@ to obtain the real @GroupID@
-associated with the current process.
-
-<tscreen><verb>
-getEffectiveGroupID :: IO GroupID
-</verb></tscreen>
-
-@getEffectiveGroupID@ calls @getegid@ to obtain the effective
-@GroupID@ associated with the current process.
-
-<tscreen><verb>
-setGroupID :: GroupID -> IO ()
-</verb></tscreen>
-
-@setGroupID gid@ calls @setgid@ to set the real, effective, and
-saved set-group-id associated with the current process to @gid@.
-
-<tscreen><verb>
-getGroups :: IO [GroupID]
-</verb></tscreen>
-
-@getGroups@ calls @getgroups@ to obtain the list of
-supplementary @GroupID@s associated with the current process.
-
-<tscreen><verb>
-getEffectiveUserName :: IO String
-</verb></tscreen>
-
-@getEffectiveUserName@ calls @cuserid@ to obtain a name
-associated with the effective @UserID@ of the process.
-
-<tscreen><verb>
-getProcessGroupID :: IO ProcessGroupID
-</verb></tscreen>
-
-@getProcessGroupID@ calls @getpgrp@ to obtain the
-@ProcessGroupID@ for the current process.
-
-<tscreen><verb>
-createProcessGroup :: ProcessID -> IO ProcessGroupID
-</verb></tscreen>
-
-@createProcessGroup pid@ calls @setpgid@ to make
-process @pid@ a new process group leader.
-
-<tscreen><verb>
-joinProcessGroup :: ProcessGroupID -> IO ProcessGroupID
-</verb></tscreen>
-
-@joinProcessGroup pgid@ calls @setpgid@ to set the
-@ProcessGroupID@ of the current process to @pgid@.
-
-<tscreen><verb>
-setProcessGroupID :: ProcessID -> ProcessGroupID -> IO ()
-</verb></tscreen>
-
-@setProcessGroupID pid pgid@ calls @setpgid@ to set the
-@ProcessGroupID@ for process @pid@ to @pgid@.
-
-<tscreen><verb>
-createSession :: IO ProcessGroupID
-</verb></tscreen>
-
-@createSession@ calls @setsid@ to create a new session
-with the current process as session leader.
-
-<tscreen><verb>
-systemName :: SystemID -> String
-nodeName :: SystemID -> String
-release :: SystemID -> String
-version :: SystemID -> String
-machine :: SystemID -> String
-
-getSystemID :: IO SystemID
-</verb></tscreen>
-
-@getSystemID@ calls @uname@ to obtain information
-about the current operating system.
-
-<tscreen><verb>
-> epochTime :: IO EpochTime
-</verb></tscreen>
-
-@epochTime@ calls @time@ to obtain the number of 
-seconds that have elapsed since the epoch (Jan 01 00:00:00 GMT 1970).
-
-<tscreen><verb>
-elapsedTime     :: ProcessTimes -> ClockTick
-userTime        :: ProcessTimes -> ClockTick
-systemTime      :: ProcessTimes -> ClockTick
-childUserTime   :: ProcessTimes -> ClockTick
-childSystemTime :: ProcessTimes -> ClockTick
-
-getProcessTimes :: IO ProcessTimes
-</verb></tscreen>
-
-@getProcessTimes@ calls @times@ to obtain time-accounting
-information for the current process and its children.
-
-<tscreen><verb>
-getControllingTerminalName :: IO FilePath
-</verb></tscreen>
-
-@getControllingTerminalName@ calls @ctermid@ to obtain
-a name associated with the controlling terminal for the process.  If a
-controlling terminal exists,
-@getControllingTerminalName@ returns the name of the
-controlling terminal.
-
-The operation may fail with:
-
-<descrip>
-<tag>@NoSuchThing@</tag>
-There is no controlling terminal, or its name cannot be determined.
-<tag>@SystemError@</tag>
-Various other causes.
-</descrip>
-
-<tscreen><verb>
-getTerminalName :: Fd -> IO FilePath
-</verb></tscreen>
-
-@getTerminalName fd@ calls @ttyname@ to obtain a name associated
-with the terminal for @Fd@ @fd@. If @fd@ is associated
-with a terminal, @getTerminalName@ returns the name of the
-terminal.
-
-The operation may fail with:
-
-<descrip>
-<tag>@InappropriateType@</tag>
-The channel is not associated with a terminal.
-<tag>@NoSuchThing@</tag>
-The channel is associated with a terminal, but it has no name.
-<tag>@SystemError@</tag>
-Various other causes.
-</descrip>
-
-<tscreen><verb>
-queryTerminal :: Fd -> IO Bool
-</verb></tscreen>
-
-@queryTerminal fd@ calls @isatty@ to determine whether or
-not @Fd@ @fd@ is associated with a terminal.
-
-<tscreen><verb>
-getSysVar :: SysVar -> IO Limit
-</verb></tscreen>
-
-@getSysVar var@ calls @sysconf@ to obtain the
-dynamic value of the requested configurable system limit or option.
-For defined system limits, @getSysVar@ returns the associated
-value.  For defined system options, the result of @getSysVar@
-is undefined, but not failure.
-
-The operation may fail with:
-
-<descrip>
-<tag>@NoSuchThing@</tag>
-The requested system limit or option is undefined.
-</descrip>
-
-<sect2>Posix operations on files and directories
-<label id="Files and Directories">
-<p>
-<nidx>Posix, files and directories</nidx>
-
-<tscreen><verb>
-openDirStream :: FilePath -> IO DirStream
-</verb></tscreen>
-
-@openDirStream dir@ calls @opendir@ to obtain a
-directory stream for @dir@.
-
-<tscreen><verb>
-readDirStream :: DirStream -> IO String
-</verb></tscreen>
-
-@readDirStream dp@ calls @readdir@ to obtain the
-next directory entry (@struct dirent@) for the open directory
-stream @dp@, and returns the @d_name@ member of that
-structure.
-
-The operation may fail with:
-
-<descrip>
-<tag>@EOF@</tag>
-End of file has been reached.
-<tag>@SystemError@</tag>
-Various other causes.
-</descrip>
-
-<tscreen><verb>
-rewindDirStream :: DirStream -> IO ()
-</verb></tscreen>
-
-@rewindDirStream dp@ calls @rewinddir@ to reposition
-the directory stream @dp@ at the beginning of the directory.
-
-<tscreen><verb>
-closeDirStream :: DirStream -> IO ()
-</verb></tscreen>
-
-@closeDirStream dp@ calls @closedir@ to close
-the directory stream @dp@.
-
-<tscreen><verb>
-getWorkingDirectory :: IO FilePath
-</verb></tscreen>
-
-@getWorkingDirectory@ calls @getcwd@ to obtain the name
-of the current working directory.
-
-<tscreen><verb>
-changeWorkingDirectory :: FilePath -> IO ()
-</verb></tscreen>
-
-@changeWorkingDirectory dir@ calls @chdir@ to change
-the current working directory to @dir@.
-
-<tscreen><verb>
-nullFileMode       :: FileMode       -- ---------
-ownerReadMode      :: FileMode       -- r--------
-ownerWriteMode     :: FileMode       -- -w-------
-ownerExecuteMode   :: FileMode       -- --x------
-groupReadMode      :: FileMode       -- ---r-----
-groupWriteMode     :: FileMode       -- ----w----
-groupExecuteMode   :: FileMode       -- -----x---
-otherReadMode      :: FileMode       -- ------r--
-otherWriteMode     :: FileMode       -- -------w-
-otherExecuteMode   :: FileMode       -- --------x
-setUserIDMode      :: FileMode       -- --S------
-setGroupIDMode     :: FileMode       -- -----S---
-		     	       
-stdFileMode        :: FileMode       -- rw-rw-rw-
-		     	       
-ownerModes         :: FileMode       -- rwx------
-groupModes         :: FileMode       -- ---rwx---
-otherModes         :: FileMode       -- ------rwx
-accessModes        :: FileMode       -- rwxrwxrwx
-
-unionFileModes     :: FileMode -> FileMode -> FileMode
-intersectFileModes :: FileMode -> FileMode -> FileMode
-
-stdInput  :: Fd
-stdInput  = intToFd 0
-
-stdOutput :: Fd
-stdOutput = intToFd 1
-
-stdError  :: Fd
-stdError  = intToFd 2
-
-data OpenFileFlags =
- OpenFileFlags {
-    append    :: Bool,
-    exclusive :: Bool,
-    noctty    :: Bool,
-    nonBlock  :: Bool,
-    trunc     :: Bool
- }
-
-openFd :: FilePath
-       -> OpenMode
-       -> Maybe FileMode  -- Just x => O_CREAT, Nothing => must exist
-       -> OpenFileFlags
-       -> IO Fd
-</verb></tscreen>
-
-@openFd path acc mode (OpenFileFlags app excl noctty nonblock trunc)@ calls
-@open@ to obtain a @Fd@ for the file @path@ with access
-mode @acc@.  If @mode@ is @Just m@, the @O_CREAT@ flag is
-set and the file's permissions will be based on @m@ if it does not
-already exist; otherwise, the @O_CREAT@ flag is not set.  The
-arguments @app@, @excl@, @noctty@, @nonblock@, and
-@trunc@ control whether or not the flags @O_APPEND@,
-@O_EXCL@, @O_NOCTTY@, @O_NONBLOCK@, and @O_TRUNC@ are set,
-respectively.
-
-<tscreen><verb>
-createFile :: FilePath -> FileMode -> IO Fd
-</verb></tscreen>
-
-@createFile path mode@ calls @creat@ to obtain a @Fd@
-for file @path@, which will be created with permissions based on
-@mode@ if it does not already exist.
-
-<tscreen><verb>
-setFileCreationMask :: FileMode -> IO FileMode
-</verb></tscreen>
-
-@setFileCreationMask mode@ calls @umask@ to set
-the process's file creation mask to @mode@.  The previous file
-creation mask is returned.
-
-<tscreen><verb>
-createLink :: FilePath -> FilePath -> IO ()
-</verb></tscreen>
-
-@createLink old new@ calls @link@ to create a 
-new path, @new@, linked to an existing file, @old@.
-<tscreen><verb>
-createDirectory :: FilePath -> FileMode -> IO ()
-</verb></tscreen>
-
-@createDirectory dir mode@ calls @mkdir@ to 
-create a new directory, @dir@, with permissions based on
-@mode@.
-
-<tscreen><verb>
-createNamedPipe :: FilePath -> FileMode -> IO ()
-</verb></tscreen>
-
-@createNamedPipe fifo mode@ calls @mkfifo@ to 
-create a new named pipe, @fifo@, with permissions based on
-@mode@.
-
-<tscreen><verb>
-removeLink :: FilePath -> IO ()
-</verb></tscreen>
-
-@removeLink path@ calls @unlink@ to remove the link
-named @path@.
-
-<tscreen><verb>
-removeDirectory :: FilePath -> IO ()
-</verb></tscreen>
-
-@removeDirectory dir@ calls @rmdir@ to remove the 
-directory named @dir@.
-
-<tscreen><verb>
-rename :: FilePath -> FilePath -> IO ()
-</verb></tscreen>
-
-@rename old new@ calls @rename@ to rename a 
-file or directory from @old@ to @new@.
-
-<tscreen><verb>
-fileMode          :: FileStatus -> FileMode
-		   
-fileID            :: FileStatus -> FileID
-deviceID          :: FileStatus -> DeviceID
-		   
-linkCount         :: FileStatus -> LinkCount
-		   
-fileOwner         :: FileStatus -> UserID
-fileGroup         :: FileStatus -> GroupID
-fileSize          :: FileStatus -> FileOffset
-
-accessTime        :: FileStatus -> EpochTime
-modificationTime  :: FileStatus -> EpochTime
-statusChangeTime  :: FileStatus -> EpochTime
-
-isDirectory       :: FileStatus -> Bool
-isCharacterDevice :: FileStatus -> Bool
-isBlockDevice     :: FileStatus -> Bool
-isRegularFile     :: FileStatus -> Bool
-isNamedPipe       :: FileStatus -> Bool
-
-getFileStatus     :: FilePath -> IO FileStatus
-</verb></tscreen>
-
-@getFileStatus path@ calls @stat@ to get the
-@FileStatus@ information for the file @path@.
-
-<tscreen><verb>
-getFdStatus :: Fd -> IO FileStatus
-</verb></tscreen>
-
-@getFdStatus fd@ calls @fstat@ to get the
-@FileStatus@ information for the file associated with
-@Fd@ @fd@.
-
-<tscreen><verb>
-queryAccess :: FilePath -> Bool -> Bool -> Bool -> IO Bool
-</verb></tscreen>
-
-@queryAccess path r w x@ calls @access@ to test the access
-permissions for file @path@.  The three arguments, @r@, @w@,
-and @x@ control whether or not @access@ is called with
-@R_OK@, @W_OK@, and @X_OK@ respectively.
-
-<tscreen><verb>
-queryFile :: FilePath -> IO Bool
-</verb></tscreen>
-
-@queryFile path@ calls @access@ with @F_OK@ to test for the
-existence for file @path@.
-
-<tscreen><verb>
-setFileMode :: FilePath -> FileMode -> IO ()
-</verb></tscreen>
-
-@setFileMode path mode@ calls @chmod@ to set the
-permission bits associated with file @path@ to @mode@.
-
-<tscreen><verb>
-setOwnerAndGroup :: FilePath -> UserID -> GroupID -> IO ()
-</verb></tscreen>
-
-@setOwnerAndGroup path uid gid@ calls @chown@ to
-set the @UserID@ and @GroupID@ associated with file
-@path@ to @uid@ and @gid@, respectively.
-
-<tscreen><verb>
-setFileTimes :: FilePath -> EpochTime -> EpochTime -> IO ()
-</verb></tscreen>
-
-@setFileTimes path atime mtime@ calls @utime@ to
-set the access and modification times associated with file
-@path@ to @atime@ and @mtime@, respectively.
-
-<tscreen><verb>
-touchFile :: FilePath -> IO ()
-</verb></tscreen>
-
-@touchFile path@ calls @utime@ to
-set the access and modification times associated with file
-@path@ to the current time.
-
-<tscreen><verb>
-getPathVar :: PathVar -> FilePath -> IO Limit
-</verb></tscreen>
-
-@getPathVar var path@ calls @pathconf@ to obtain the
-dynamic value of the requested configurable file limit or option associated
-with file or directory @path@.  For
-defined file limits, @getPathVar@ returns the associated
-value.  For defined file options, the result of @getPathVar@
-is undefined, but not failure.
-The operation may fail with:
-<descrip>
-<tag>@NoSuchThing@</tag>
-The requested file limit or option is undefined.
-<tag>@SystemError@</tag>
-Various other causes.
-</descrip>
-
-
-<tscreen><verb>
-getFdVar :: PathVar -> Fd -> IO Limit
-</verb></tscreen>
-
-@getFdVar var fd@ calls @fpathconf@ to obtain the
-dynamic value of the requested configurable file limit or option associated
-with the file or directory attached to the open channel @fd@.
-For defined file limits, @getFdVar@ returns the associated
-value.  For defined file options, the result of @getFdVar@
-is undefined, but not failure.
-
-The operation may fail with:
-
-<descrip>
-<tag>@NoSuchThing@</tag>
-The requested file limit or option is undefined.
-<tag>@SystemError@</tag>
-Various other causes.
-</descrip>
-
-<sect2>Posix Input and Output Primitives
-<label id="Input/Output">
-<p>
-<nidx>Posix, input/output</nidx>
-
-<tscreen><verb>
-createPipe :: IO (Fd, Fd)
-</verb></tscreen>
-
-@createPipe@ calls @pipe@ to create a pipe and returns a pair of
-@Fd@s, the first for reading and the second for writing.
-
-<tscreen><verb>
-dup :: Fd -> IO Fd
-</verb></tscreen>
-
-@dup fd@ calls @dup@ to duplicate @Fd@ @fd@ to
-another @Fd@.
-
-<tscreen><verb>
-dupTo :: Fd -> Fd -> IO ()
-</verb></tscreen>
-
-@dupTo src dst@ calls @dup2@ to duplicate @Fd@
-@src@ to @Fd@ @dst@.
-
-<tscreen><verb>
-fdClose :: Fd -> IO ()
-</verb></tscreen>
-
-@fdClose fd@ calls @close@ to close @Fd@ @fd@.
-
-<tscreen><verb>
-fdRead :: Fd -> ByteCount -> IO (String, ByteCount)
-</verb></tscreen>
-
-@fdRead fd nbytes@ calls @read@ to read at most @nbytes@
-bytes from @Fd@ @fd@, and returns the result as a string
-paired with the number of bytes actually read.
-
-The operation may fail with:
-
-<descrip>
-<tag>@EOF@</tag>
-End of file has been reached.
-<tag>@SystemError@</tag>
-Various other causes.
-</descrip>
-
-<tscreen><verb>
-fdWrite :: Fd -> String -> IO ByteCount
-</verb></tscreen>
-
-@fdWrite fd s@ calls @write@ to write
-the string @s@ to @Fd@ @fd@ as a
-contiguous sequence of bytes.  It returns the number of bytes successfully
-written.
-
-<tscreen><verb>
-queryFdOption :: FdOption -> Fd -> IO Bool
-</verb></tscreen>
-
-@getFdOption opt fd@ calls @fcntl@ to determine whether or
-not the flag associated with @FdOption@ @opt@ is set for
-@Fd@ @fd@.
-
-<tscreen><verb>
-setFdOption :: Fd -> FdOption -> Bool -> IO ()
-</verb></tscreen>
-
-@setFdOption fd opt val@ calls @fcntl@ to set the flag
-associated with @FdOption@ @opt@ on @Fd@ @fd@ to
-@val@.
-
-<tscreen><verb>
-getLock :: Fd -> FileLock -> IO (Maybe (ProcessID, FileLock))
-</verb></tscreen>
-
-@getLock fd lock@ calls @fcntl@ to get the first @FileLock@
-for @Fd@ @fd@ which blocks the @FileLock@ @lock@.  If
-no such @FileLock@ exists, @getLock@ returns @Nothing@.
-Otherwise, it returns @Just (pid, block)@, where @block@ is the
-blocking @FileLock@ and @pid@ is the @ProcessID@ of the
-process holding the blocking @FileLock@.
-
-
-<tscreen><verb>
-setLock :: Fd -> FileLock -> IO ()
-</verb></tscreen>
-
-@setLock fd lock@ calls @fcntl@ with @F_SETLK@ to set or
-clear a lock segment for @Fd@ @fd@ as indicated by the
-@FileLock@ @lock@.  @setLock@ does not block, but fails with
-@SystemError@ if the request cannot be satisfied immediately.
-
-<tscreen><verb>
-waitToSetLock :: Fd -> FileLock -> IO ()
-</verb></tscreen>
-
-@waitToSetLock fd lock@ calls @fcntl@ with @F_SETLKW@ to set
-or clear a lock segment for @Fd@ @fd@ as indicated by the
-@FileLock@ @lock@. If the request cannot be satisfied
-immediately, @waitToSetLock@ blocks until the request can be
-satisfied.
-
-
-<tscreen><verb>
-fdSeek :: Fd -> SeekMode -> FileOffset -> IO FileOffset
-</verb></tscreen>
-
-@fdSeek fd whence offset@ calls @lseek@ to position the
-@Fd@ @fd@ at the given @offset@ from the starting location
-indicated by @whence@.  It returns the resulting offset from the
-start of the file in bytes.
-
-<sect2>Posix, Device- and Class-Specific Functions
-<label id="Device Specific Functions">
-<p>
-<nidx>Posix, device and class-specific functions</nidx>
-
-<tscreen><verb>
-terminalMode    :: TerminalMode -> TerminalAttributes -> Bool
-withMode        :: TerminalAttributes -> TerminalMode -> TerminalAttributes
-withoutMode     :: TerminalAttributes -> TerminalMode -> TerminalAttributes
-
-bitsPerByte     :: TerminalAttributes -> Int
-withBits        :: TerminalAttributes -> Int -> TerminalAttributes
-
-controlChar     :: TerminalAttributes -> ControlCharacter -> Maybe Char
-withCC          :: TerminalAttributes
-                -> (ControlCharacter, Char)
-                -> TerminalAttributes 
-withoutCC       :: TerminalAttributes 
-                -> ControlCharacter 
-                -> TerminalAttributes
-		  
-inputTime       :: TerminalAttributes -> Int
-withTime        :: TerminalAttributes -> Int -> TerminalAttributes
-		  
-minInput        :: TerminalAttributes -> Int
-withMinInput    :: TerminalAttributes -> Int -> TerminalAttributes
-		  
-inputSpeed      :: TerminalAttributes -> BaudRate
-withInputSpeed  :: TerminalAttributes -> BaudRate -> TerminalAttributes
-		  
-outputSpeed     :: TerminalAttributes -> BaudRate
-withOutputSpeed :: TerminalAttributes -> BaudRate -> TerminalAttributes
-
-getTerminalAttributes :: Fd -> IO TerminalAttributes
-</verb></tscreen>
-
-@getTerminalAttributes fd@ calls @tcgetattr@ to obtain
-the @TerminalAttributes@ associated with @Fd@ @fd@.
-
-<tscreen><verb>
-setTerminalAttributes :: Fd
-                      -> TerminalAttributes 
-                      -> TerminalState
-                      -> IO ()
-</verb></tscreen>
-
-@setTerminalAttributes fd attr ts@ calls @tcsetattr@ to change
-the @TerminalAttributes@ associated with @Fd@ @fd@ to
-@attr@, when the terminal is in the state indicated by @ts@.
-
-<tscreen><verb>
-sendBreak :: Fd -> Int -> IO ()
-</verb></tscreen>
-
-@sendBreak fd duration@ calls @tcsendbreak@ to transmit a
-continuous stream of zero-valued bits on @Fd@ @fd@ for the
-specified implementation-dependent @duration@.
-
-<tscreen><verb>
-drainOutput :: Fd -> IO ()
-</verb></tscreen>
-
-@drainOutput fd@ calls @tcdrain@ to block until all output
-written to @Fd@ @fd@ has been transmitted.
-
-<tscreen><verb>
-discardData :: Fd -> QueueSelector -> IO ()
-</verb></tscreen>
-
-@discardData fd queues@ calls @tcflush@ to discard
-pending input and/or output for @Fd@ @fd@,
-as indicated by the @QueueSelector@ @queues@.
-
-<tscreen><verb>
-controlFlow :: Fd -> FlowAction -> IO ()
-</verb></tscreen>
-
-@controlFlow fd action@ calls @tcflow@ to control the 
-flow of data on @Fd@ @fd@, as indicated by
-@action@.
-
-<tscreen><verb>
-getTerminalProcessGroupID :: Fd -> IO ProcessGroupID
-</verb></tscreen>
-
-@getTerminalProcessGroupID fd@ calls @tcgetpgrp@ to
-obtain the @ProcessGroupID@ of the foreground process group 
-associated with the terminal attached to @Fd@ @fd@.
-
-<tscreen><verb>
-setTerminalProcessGroupID :: Fd -> ProcessGroupID -> IO ()
-</verb></tscreen>
-
-@setTerminalProcessGroupID fd pgid@ calls @tcsetpgrp@ to
-set the @ProcessGroupID@ of the foreground process group 
-associated with the terminal attached to @Fd@ 
-@fd@ to @pgid@.
-
-<sect2>Posix System Databases
-<label id="System Database">
-<p>
-<nidx>Posix, system databases</nidx>
-
-<tscreen><verb>
-groupName    :: GroupEntry -> String
-groupID      :: GroupEntry -> GroupID
-groupMembers :: GroupEntry -> [String]
-
-getGroupEntryForID :: GroupID -> IO GroupEntry
-</verb></tscreen>
-
-@getGroupEntryForID gid@ calls @getgrgid@ to obtain
-the @GroupEntry@ information associated with @GroupID@
-@gid@.
-
-The operation may fail with:
-
-<descrip>
-<tag>@NoSuchThing@</tag>
-There is no group entry for the GroupID.
-</descrip>
-
-<tscreen><verb>
-getGroupEntryForName :: String -> IO GroupEntry
-</verb></tscreen>
-
-@getGroupEntryForName name@ calls @getgrnam@ to obtain
-the @GroupEntry@ information associated with the group called
-@name@.
-
-The operation may fail with:
-
-<descrip>
-<tag>@NoSuchThing@</tag>
-There is no group entry for the name.
-</descrip>
-
-<tscreen><verb>
-userName      :: UserEntry -> String
-userID        :: UserEntry -> UserID
-userGroupID   :: UserEntry -> GroupID
-homeDirectory :: UserEntry -> String
-userShell     :: UserEntry -> String
-
-getUserEntryForID :: UserID -> IO UserEntry
-</verb></tscreen>
-
-@getUserEntryForID gid@ calls @getpwuid@ to obtain
-the @UserEntry@ information associated with @UserID@
-@uid@.
-The operation may fail with:
-
-<descrip>
-<tag>@NoSuchThing@</tag>
-There is no user entry for the UserID.
-</descrip>
-
-<tscreen><verb>
-getUserEntryForName :: String -> IO UserEntry
-</verb></tscreen>
-
-@getUserEntryForName name@ calls @getpwnam@ to obtain
-the @UserEntry@ information associated with the user login
-@name@.
-
-The operation may fail with:
-
-<descrip>
-<tag>@NoSuchThing@</tag>
-There is no user entry for the name.
-</descrip>
-
-<sect2>POSIX Errors
-<label id="Error reporting and handling">
-<p>
-<nidx>Posix, errors</nidx>
-
-<tscreen><verb>
-getErrorCode :: IO ErrorCode
-</verb></tscreen>
-
-@getErrorCode@ returns the current value of the external
-variable @errno@.  It never fails.
-
-<tscreen><verb>
-setErrorCode :: ErrorCode -> IO ()
-</verb></tscreen>
-
-@setErrorCode err@ sets the external
-variable @errno@ to @err@.  It never fails.
-
-<tscreen><verb>
-noError :: ErrorCode
-noError = 0
-
-argumentListTooLong, e2BIG              :: ErrorCode
-badFd, eBADF                            :: ErrorCode
-brokenPipe, ePIPE                       :: ErrorCode
-directoryNotEmpty, eNOTEMPTY            :: ErrorCode
-execFormatError, eNOEXEC                :: ErrorCode
-fileAlreadyExists, eEXIST               :: ErrorCode
-fileTooLarge, eFBIG                     :: ErrorCode
-filenameTooLong, eNAMETOOLONG           :: ErrorCode
-improperLink, eXDEV                     :: ErrorCode
-inappropriateIOControlOperation, eNOTTY :: ErrorCode
-inputOutputError, eIO                   :: ErrorCode
-interruptedOperation, eINTR             :: ErrorCode
-invalidArgument, eINVAL                 :: ErrorCode
-invalidSeek, eSPIPE                     :: ErrorCode
-isADirectory, eISDIR                    :: ErrorCode
-noChildProcess, eCHILD                  :: ErrorCode
-noLocksAvailable, eNOLCK                :: ErrorCode
-noSpaceLeftOnDevice, eNOSPC             :: ErrorCode
-noSuchOperationOnDevice, eNODEV         :: ErrorCode
-noSuchDeviceOrAddress, eNXIO            :: ErrorCode
-noSuchFileOrDirectory, eNOENT           :: ErrorCode
-noSuchProcess, eSRCH                    :: ErrorCode
-notADirectory, eNOTDIR                  :: ErrorCode
-notEnoughMemory, eNOMEM                 :: ErrorCode
-operationNotImplemented, eNOSYS         :: ErrorCode
-operationNotPermitted, ePERM            :: ErrorCode
-permissionDenied, eACCES                :: ErrorCode
-readOnlyFileSystem, eROFS               :: ErrorCode
-resourceBusy, eBUSY                     :: ErrorCode
-resourceDeadlockAvoided, eDEADLK        :: ErrorCode
-resourceTemporarilyUnavailable, eAGAIN  :: ErrorCode
-tooManyLinks, eMLINK                    :: ErrorCode
-tooManyOpenFiles, eMFILE                :: ErrorCode
-tooManyOpenFilesInSystem, eNFILE        :: ErrorCode
-
-</verb></tscreen>
diff --git a/ghc/docs/users_guide/profiling.vsgml b/ghc/docs/users_guide/profiling.vsgml
deleted file mode 100644
index 5b82b55..0000000
--- a/ghc/docs/users_guide/profiling.vsgml
+++ /dev/null
@@ -1,612 +0,0 @@
-<sect>Profiling
-<label id="profiling">
-<p>
-<nidx>profiling, with cost-centres</nidx>
-<nidx>cost-centre profiling</nidx>
-
-Glasgow Haskell comes with a time and space profiling system. Its
-purpose is to help you improve your understanding of your program's
-execution behaviour, so you can improve it.
-
-Any comments, suggestions and/or improvements you have are welcome.
-Recommended ``profiling tricks'' would be especially cool!
-
-<sect1>How to profile a Haskell program
-<label id="profiling-intro">
-<p>
-
-The GHC approach to profiling is very simple: annotate the expressions
-you consider ``interesting'' with <em>cost centre</em> labels (strings);
-so, for example, you might have:
-
-<tscreen><verb>
-f x y
-  = let
-	output1 = _scc_ "Pass1" ( pass1 x )
-	output2 = _scc_ "Pass2" ( pass2 output1 y )
-	output3 = _scc_ "Pass3" ( pass3 (output2 `zip` [1 .. ]) )
-    in concat output3
-</verb></tscreen>
-
-The costs of the evaluating the expressions bound to @output1@,
-@output2@ and @output3@ will be attributed to the ``cost
-centres'' @Pass1@, @Pass2@ and @Pass3@, respectively.
-
-The costs of evaluating other expressions, e.g., @concat output4@,
-will be inherited by the scope which referenced the function @f@.
-
-You can put in cost-centres via @_scc_@ constructs by hand, as in the
-example above.  Perfectly cool.  That's probably what you
-<em>would</em> do if your program divided into obvious ``passes'' or
-``phases'', or whatever.
-
-If your program is large or you have no clue what might be gobbling
-all the time, you can get GHC to mark all functions with @_scc_@
-constructs, automagically.  Add an @-auto@ compilation flag to the
-usual @-prof@ option.
-
-Once you start homing in on the Guilty Suspects, you may well switch
-from automagically-inserted cost-centres to a few well-chosen ones of
-your own.
-
-To use profiling, you must <em>compile</em> and <em>run</em> with special
-options.  (We usually forget the ``run'' magic!---Do as we say, not as
-we do...) Details follow.
-
-If you're serious about this profiling game, you should probably read
-one or more of the Sansom/Peyton Jones papers about the GHC profiling
-system.  Just visit the <url name="Glasgow FP group web page"
-url="http://www.dcs.gla.ac.uk/fp/">...
-
-<sect1>Compiling programs for profiling
-<label id="prof-compiler-options">
-<p>
-<nidx>profiling options</nidx>
-<nidx>options, for profiling</nidx>
-
-To make use of the cost centre profiling system <em>all</em> modules must
-be compiled and linked with the @-prof@ option.<nidx>-prof option</nidx>
-Any @_scc_@ constructs you've put in your source will spring to life.
-
-Without a @-prof@ option, your @_scc_@s are ignored; so you can
-compiled @_scc_@-laden code without changing it.
-
-There are a few other profiling-related compilation options.  Use them
-<em>in addition to</em> @-prof@.  These do not have to be used
-consistently for all modules in a program.
-
-<descrip>
-<tag>@-auto@:</tag>
-<nidx>-auto option</nidx>
-<nidx>cost centres, automatically inserting</nidx>
-GHC will automatically add @_scc_@ constructs for
-all top-level, exported functions.
-
-<tag>@-auto-all@:</tag>
-<nidx>-auto-all option</nidx>
-<em>All</em> top-level functions, exported or not, will be automatically
-@_scc_@'d.
-
-<tag>@-caf-all@:</tag>
-<nidx>-caf-all option</nidx>
-The costs of all CAFs in a module are usually attributed to one
-``big'' CAF cost-centre. With this option, all CAFs get their own cost-centre.
-An ``if all else fails'' option...
-
-%<tag>@-dict-all@:</tag>
-%<nidx>-dict-all option</nidx>
-%Similarly, this option means that all ``dictionaries'' (internal
-%constructs to support Haskell overloading) should get their own
-%cost-centre.  (Again, the costs are usually attributed to one ``big''
-%DICT cost-centre.)
-%
-%Incidentally, something is probably Bad Wrong (i.e., a GHC bug) if you
-%see big costs attributed to dictionaries.
-
-<tag>@-ignore-scc@:</tag>
-<nidx>-ignore-scc option</nidx>
-Ignore any @_scc_@ constructs,
-so a module which already has @_scc_@s can be
-compiled for profiling with the annotations ignored.
-
-<tag>@-G<group>@:</tag>
-<nidx>-G&lt;group&gt; option</nidx>
-Specifies the @<group>@ to be attached to all the cost-centres
-declared in the module. If no group is specified it defaults to the
-module name.
-</descrip>
-
-In addition to the @-prof@ option your system might be setup to enable
-you to compile and link with the @-prof-details@ <nidx>-prof-details
-option</nidx> option instead. This enables additional detailed counts
-to be reported with the @-P@ RTS option.  
-
-%-prof-details should also enable age profiling if we get it going again ...
-
-<sect1>How to control your profiled program at runtime
-<label id="prof-rts-options">
-<p>
-<nidx>profiling RTS options</nidx>
-<nidx>RTS options, for profiling</nidx>
-
-It isn't enough to compile your program for profiling with @-prof@!
-
-When you <em>run</em> your profiled program, you must tell the runtime
-system (RTS) what you want to profile (e.g., time and/or space), and
-how you wish the collected data to be reported.  You also may wish to
-set the sampling interval used in time profiling.
-
-Executive summary: @./a.out +RTS -pT@ produces a time profile in
-@a.out.prof@; @./a.out +RTS -hC@ produces space-profiling
-info which can be mangled by @hp2ps@ and viewed with @ghostview@
-(or equivalent).
-
-Profiling runtime flags are passed to your program between the usual
-@+RTS@ and @-RTS@ options.
-
-<descrip>
-<tag>@-p<sort>@ or @-P<sort>@:</tag>
-<nidx>-p&lt;sort&gt; RTS option (profiling)</nidx>
-<nidx>-P&lt;sort&gt; RTS option (profiling)</nidx>
-<nidx>time profile</nidx>
-<nidx>serial time profile</nidx>
-The @-p?@ option produces a standard <em>time profile</em> report.
-It is written into the file @<program>@@.prof@.
-
-The @-P?@ option produces a more detailed report containing the
-actual time and allocation data as well.  (Not used much.)
-
-%The @-P?@ option also produces <em>serial time-profiling</em>
-%information, in the file @<program>@@.time@. This can be
-%converted into a (somewhat unsatisfactory) PostScript graph using
-%@hp2ps@ (see Section <ref name="hp2ps - heap profile to PostScript" id="hp2ps">).
-
-%???? -F2s needed for serial time profile??? ToDo
-
-The @<sort>@ indicates how the cost centres are to be sorted in the
-report. Valid @<sort>@ options are:
-<descrip>
-<tag>@T@:</tag> by time, largest first (the default);
-<tag>@A@:</tag> by bytes allocated, largest first;
-<tag>@C@:</tag> alphabetically by group, module and cost centre.
-</descrip>
-
-<tag>@-i<secs>@:</tag> <nidx>-i&lt;secs&gt; RTS option
-(profiling)</nidx> Set the profiling (sampling) interval to @<secs>@
-seconds (the default is 1~second).  Fractions are allowed: for example
-@-i0.2@ will get 5 samples per second.
-
-<tag>@-h<break-down>@:</tag>
-<nidx>-h&lt;break-down&gt; RTS option (profiling)</nidx>
-<nidx>heap profile</nidx>
-
-Produce a detailed <em>space profile</em> of the heap occupied by live
-closures. The profile is written to the file @<program>@@.hp@ from
-which a PostScript graph can be produced using @hp2ps@ (see Section
-<ref name="hp2ps - heap profile to PostScript" id="hp2ps">).
-
-The heap space profile may be broken down by different criteria:
-<descrip>
-<tag>@-hC@:</tag> cost centre which produced the closure (the default).
-<tag>@-hM@:</tag> cost centre module which produced the closure.
-<tag>@-hG@:</tag> cost centre group which produced the closure.
-<tag>@-hD@:</tag> closure description --- a string describing the closure.
-<tag>@-hY@:</tag> closure type --- a string describing the closure's type.
-%<tag>@-hT<ints>,<start>@:</tag> the time interval the closure was
-%created. @<ints>@ specifies the no. of interval bands plotted
-%(default 18) and @<start>@ the number of seconds after which the
-%reported intervals start (default 0.0).
-</descrip>
-By default all live closures in the heap are profiled, but particular
-closures of interest can be selected (see below). 
-</descrip>
-
-
-Heap (space) profiling uses hash tables. If these tables
-should fill the run will abort. The
-@-z<tbl><size>@<nidx>-z&lt;tbl&gt;&lt;size&gt; RTS option (profiling)</nidx> option is used to
-increase the size of the relevant hash table (@C@, @M@,
-@G@, @D@ or @Y@, defined as for @<break-down>@ above). The
-actual size used is the next largest power of 2.
-
-The heap profile can be restricted to particular closures of interest.
-The closures of interest can selected by the attached cost centre
-(module:label, module and group), closure category (description, type,
-and kind) using the following options:
-
-<descrip>
-<tag>@-c{<mod>:<lab>,<mod>:<lab>...@}:</tag>
-<nidx>-c{&lt;lab&gt;</nidx> RTS option (profiling)}
-Selects individual cost centre(s).
-<tag>@-m{<mod>,<mod>...@}:</tag>
-<nidx>-m{&lt;mod&gt;</nidx> RTS option (profiling)}
-Selects all cost centres from the module(s) specified.
-<tag>@-g{<grp>,<grp>...@}:</tag>
-<nidx>-g{&lt;grp&gt;</nidx> RTS option (profiling)}
-Selects all cost centres from the groups(s) specified.
-<tag>@-d{<des>,<des>...@}:</tag>
-<nidx>-d{&lt;des&gt;</nidx> RTS option (profiling)}
-Selects closures which have one of the specified descriptions.
-<tag>@-y{<typ>,<typ>...@}:</tag>
-<nidx>-y{&lt;typ&gt;</nidx> RTS option (profiling)}
-Selects closures which have one of the specified type descriptions.
-<tag>@-k{<knd>,<knd>...@}:</tag>
-<nidx>-k{&lt;knd&gt;</nidx> RTS option (profiling)}
-Selects closures which are of one of the specified closure kinds.
-Valid closure kinds are @CON@ (constructor), @FN@ (manifest
-function), @PAP@ (partial application), @BH@ (black hole) and
-@THK@ (thunk).
-</descrip>
-
-The space occupied by a closure will be reported in the heap profile
-if the closure satisfies the following logical expression:
-
-<quote>
-([-c] or [-m] or [-g]) and ([-d] or [-y] or [-k])
-</quote>
-
-where a particular option is true if the closure (or its attached cost
-centre) is selected by the option (or the option is not specified).
-
-<sect1>What's in a profiling report?
-<label id="prof-output">
-<p>
-<nidx>profiling report, meaning thereof</nidx>
-
-When you run your profiled program with the @-p@ RTS option <nidx>-p
-RTS option</nidx>, you get the following information about your ``cost
-centres'':
-
-<descrip>
-%-------------------------------------------------------------
-<tag>@COST CENTRE@:</tag> The cost-centre's name.
-%-------------------------------------------------------------
-<tag>@MODULE@:</tag>
-The module associated with the cost-centre;
-important mostly if you have identically-named cost-centres in
-different modules.
-%-------------------------------------------------------------
-<tag>@scc@:</tag>
-How many times this cost-centre was entered; think
-of it as ``I got to the @_scc_@ construct this many times...''
-%-------------------------------------------------------------
-<tag>@%time@:</tag>
-What part of the time was spent in this cost-centre (see also ``ticks,''
-below).
-%-------------------------------------------------------------
-<tag>@%alloc@:</tag>
-What part of the memory allocation was done in this cost-centre
-(see also ``bytes,'' below).
-%-------------------------------------------------------------
-<tag>@inner@:</tag>
-How many times this cost-centre ``passed control'' to an inner
-cost-centre; for example, @scc=4@ plus @subscc=8@ means
-``This @_scc_@ was entered four times, but went out to
-other @_scc_s@ eight times.''
-%-------------------------------------------------------------
-<tag>@cafs@:</tag>
-<nidx>CAF, profiling</nidx>
-How many CAFs this cost centre evaluated.
-%-------------------------------------------------------------
-<tag>@dicts@:</tag>
-<nidx>Dictionaries, profiling</nidx>
-How many dictionaries this cost centre evaluated.
-</descrip>
-
-In addition you can use the @-P@ RTS option <nidx></nidx> to get the following additional information: 
-<descrip>
-%-------------------------------------------------------------
-<tag>@ticks@:</tag>  The raw number of time ``ticks'' which were
-attributed to this cost-centre; from this, we get the @%time@
-figure mentioned above.
-%-------------------------------------------------------------
-<tag>@bytes@:</tag> Number of bytes allocated in the heap while in
-this cost-centre; again, this is the raw number from which we
-get the @%alloc@ figure mentioned above.
-</descrip>
-
-Finally if you built your program with @-prof-details@
-<nidx></nidx> the @-P@ RTS option will also
-produce the following information:
-<descrip>
-%-------------------------------------------------------------
-<tag>@closures@:</tag>
-<nidx>closures, profiling</nidx>
-How many heap objects were allocated; these objects may be of varying
-size.  If you divide the number of bytes (mentioned below) by this
-number of ``closures'', then you will get the average object size.
-(Not too interesting, but still...)
-%-------------------------------------------------------------
-<tag>@thunks@:</tag>
-<nidx>thunks, profiling</nidx>
-How many times we entered (evaluated) a thunk---an unevaluated
-object in the heap---while we were in this cost-centre.
-%-------------------------------------------------------------
-<tag>@funcs@:</tag>
-<nidx>functions, profiling</nidx>
-How many times we entered (evaluated) a function while we we in this
-cost-centre.  (In Haskell, functions are first-class values and may be
-passed as arguments, returned as results, evaluated, and generally
-manipulated just like data values)
-%-------------------------------------------------------------
-<tag>@PAPs@:</tag>
-<nidx>partial applications, profiling</nidx>
-How many times we entered (evaluated) a partial application (PAP), i.e.,
-a function applied to fewer arguments than it needs.  For example, @Int@
-addition applied to one argument would be a PAP.  A PAP is really
-just a particular form for a function.
-</descrip>
-
-<sect1>Producing graphical heap profiles
-<label id="prof-graphs">
-<p>
-<nidx>heap profiles, producing</nidx>
-
-Utility programs which produce graphical profiles.
-
-<sect2>@hp2ps@--heap profile to PostScript
-<label id="hp2ps">
-<p>
-<nidx>hp2ps (utility)</nidx>
-<nidx>heap profiles</nidx>
-<nidx>PostScript, from heap profiles</nidx>
-
-Usage:
-
-<tscreen> <verb>
-hp2ps [flags] [<file>[.stat]]
-</verb> </tscreen>
-
-The program @hp2ps@<nidx>hp2ps program</nidx> converts a heap profile
-as produced by the @-h<break-down>@<nidx>-h&lt;break-down&gt; RTS
-option</nidx> runtime option into a PostScript graph of the heap
-profile. By convention, the file to be processed by @hp2ps@ has a
-@.hp@ extension. The PostScript output is written to @<file>@@.ps@. If
-@<file>@ is omitted entirely, then the program behaves as a filter.
-
-@hp2ps@ is distributed in @ghc/utils/hp2ps@ in a GHC source
-distribution. It was originally developed by Dave Wakeling as part of
-the HBC/LML heap profiler.
-
-The flags are:
-<descrip>
-<tag>@-d@</tag>
-In order to make graphs more readable, @hp2ps@ sorts the shaded
-bands for each identifier. The default sort ordering is for the bands
-with the largest area to be stacked on top of the smaller ones.  The
-@-d@ option causes rougher bands (those representing series of
-values with the largest standard deviations) to be stacked on top of
-smoother ones.
-
-<tag>@-b@</tag> 
-Normally, @hp2ps@ puts the title of the graph in a small box at the
-top of the page. However, if the JOB string is too long to fit in a
-small box (more than 35 characters), then
-@hp2ps@ will choose to use a big box instead.  The @-b@
-option forces @hp2ps@ to use a big box.
-
-<tag>@-e<float>[in|mm|pt]@</tag>
-Generate encapsulated PostScript suitable for inclusion in LaTeX
-documents.  Usually, the PostScript graph is drawn in landscape mode
-in an area 9 inches wide by 6 inches high, and @hp2ps@ arranges
-for this area to be approximately centred on a sheet of a4 paper.
-This format is convenient of studying the graph in detail, but it is
-unsuitable for inclusion in LaTeX documents.  The @-e@ option
-causes the graph to be drawn in portrait mode, with float specifying
-the width in inches, millimetres or points (the default).  The
-resulting PostScript file conforms to the Encapsulated PostScript
-(EPS) convention, and it can be included in a LaTeX document using
-Rokicki's dvi-to-PostScript converter @dvips@.
-
-<tag>@-g@</tag>
-Create output suitable for the @gs@ PostScript previewer (or
-similar). In this case the graph is printed in portrait mode without
-scaling. The output is unsuitable for a laser printer.
-
-<tag>@-l@</tag>
-Normally a profile is limited to 20 bands with additional identifiers
-being grouped into an @OTHER@ band. The @-l@ flag removes this
-20 band and limit, producing as many bands as necessary. No key is
-produced as it won't fit!. It is useful for creation time profiles
-with many bands.
-
-<tag>@-m<int>@</tag>
-Normally a profile is limited to 20 bands with additional identifiers
-being grouped into an @OTHER@ band. The @-m@ flag specifies an
-alternative band limit (the maximum is 20).
-
-@-m0@ requests the band limit to be removed. As many bands as
-necessary are produced. However no key is produced as it won't fit! It
-is useful for displaying creation time profiles with many bands.
-
-<tag>@-p@</tag>
-Use previous parameters. By default, the PostScript graph is
-automatically scaled both horizontally and vertically so that it fills
-the page.  However, when preparing a series of graphs for use in a
-presentation, it is often useful to draw a new graph using the same
-scale, shading and ordering as a previous one. The @-p@ flag causes
-the graph to be drawn using the parameters determined by a previous
-run of @hp2ps@ on @file@. These are extracted from
-@file@@.aux@.
-
-<tag>@-s@</tag> Use a small box for the title.
-
-<tag>@-t<float>@</tag>
-Normally trace elements which sum to a total of less than 1\% of the
-profile are removed from the profile. The @-t@ option allows this
-percentage to be modified (maximum 5\%). 
-
-@-t0@ requests no trace elements to be removed from the profile,
-ensuring that all the data will be displayed. 
-
-<tag>@-?@</tag> Print out usage information.
-</descrip>
-
-<sect2>@stat2resid@---residency info from GC stats
-<label id="stat2resid">
-<p>
-<nidx>stat2resid (utility)</nidx>
-<nidx>GC stats---residency info</nidx>
-<nidx>residency, from GC stats</nidx>
-
-Usage:
-
-<tscreen> <verb>
-stat2resid [<file>[.stat] [<outfile>]]
-</verb> </tscreen>
-
-The program @stat2resid@<nidx>stat2resid</nidx> converts a detailed
-garbage collection statistics file produced by the 
-@-S@<nidx>-S RTS option</nidx> runtime option into a PostScript heap
-residency graph. The garbage collection statistics file can be
-produced without compiling your program for profiling.
-
-By convention, the file to be processed by @stat2resid@ has a
-@.stat@ extension. If the @<outfile>@ is not specified the
-PostScript will be written to @<file>@@.resid.ps@. If
-@<file>@ is omitted entirely, then the program behaves as a filter. 
-
-The plot can not be produced from the statistics file for a
-generational collector, though a suitable stats file can be produced
-using the @-F2s@<nidx>-F2s RTS option</nidx> runtime option when the
-program has been compiled for generational garbage collection (the
-default).
-
-@stat2resid@ is distributed in @ghc/utils/stat2resid@ in a GHC source
-distribution.
-
-%************************************************************************
-%*									*
-<sect1>Using ``ticky-ticky'' profiling (for implementors)
-<label id="ticky-ticky">
-<p>
-<nidx>ticky-ticky profiling (implementors)</nidx>
-%*									*
-%************************************************************************
-
-(ToDo: document properly.)
-
-It is possible to compile Glasgow Haskell programs so that they will
-count lots and lots of interesting things, e.g., number of updates,
-number of data constructors entered, etc., etc.  We call this
-``ticky-ticky'' profiling,<nidx>ticky-ticky profiling</nidx>%
-<nidx>profiling, ticky-ticky</nidx> because that's the sound a Sun4 makes
-when it is running up all those counters (<em>slowly</em>).
-
-Ticky-ticky profiling is mainly intended for implementors; it is quite
-separate from the main ``cost-centre'' profiling system, intended for
-all users everywhere.
-
-To be able to use ticky-ticky profiling, you will need to have built
-appropriate libraries and things when you made the system.  See
-``Customising what libraries to build,'' in the installation guide.
-
-To get your compiled program to spit out the ticky-ticky numbers, use
-a @-r@ RTS option<nidx>-r RTS option</nidx>.  See Section <ref
-name="Running a compiled program" id="runtime-control">.
-
-Compiling your program with the @-ticky@ switch yields an executable
-that performs these counts.  Here is a sample ticky-ticky statistics
-file, generated by the invocation @foo +RTS -rfoo.ticky@.
-
-<tscreen> <verb>
-foo +RTS -rfoo.ticky
-
-
-ALLOCATIONS: 3964631 (11330900 words total: 3999476 admin, 6098829 goods, 1232595 slop)
-				total words:	    2     3     4     5    6+
-  69647 (  1.8%) function values		 50.0  50.0   0.0   0.0   0.0
-2382937 ( 60.1%) thunks				  0.0  83.9  16.1   0.0   0.0
-1477218 ( 37.3%) data values			 66.8  33.2   0.0   0.0   0.0
-      0 (  0.0%) big tuples
-      2 (  0.0%) black holes			  0.0 100.0   0.0   0.0   0.0
-      0 (  0.0%) prim things
-  34825 (  0.9%) partial applications		  0.0   0.0   0.0 100.0   0.0
-      2 (  0.0%) thread state objects		  0.0   0.0   0.0   0.0 100.0
-
-Total storage-manager allocations: 3647137 (11882004 words)
-	[551104 words lost to speculative heap-checks]
-
-STACK USAGE:
-
-ENTERS: 9400092  of which 2005772 (21.3%) direct to the entry code
-		  [the rest indirected via Node's info ptr]
-1860318 ( 19.8%) thunks
-3733184 ( 39.7%) data values
-3149544 ( 33.5%) function values
-		  [of which 1999880 (63.5%) bypassed arg-satisfaction chk]
- 348140 (  3.7%) partial applications
- 308906 (  3.3%) normal indirections
-      0 (  0.0%) permanent indirections
-
-RETURNS: 5870443
-2137257 ( 36.4%) from entering a new constructor
-		  [the rest from entering an existing constructor]
-2349219 ( 40.0%) vectored [the rest unvectored]
-
-RET_NEW:         2137257:  32.5% 46.2% 21.3%  0.0%  0.0%  0.0%  0.0%  0.0%  0.0%
-RET_OLD:         3733184:   2.8% 67.9% 29.3%  0.0%  0.0%  0.0%  0.0%  0.0%  0.0%
-RET_UNBOXED_TUP:       2:   0.0%  0.0%100.0%  0.0%  0.0%  0.0%  0.0%  0.0%  0.0%
-
-RET_VEC_RETURN : 2349219:   0.0%  0.0%100.0%  0.0%  0.0%  0.0%  0.0%  0.0%  0.0%
-
-UPDATE FRAMES: 2241725 (0 omitted from thunks)
-SEQ FRAMES:    1
-CATCH FRAMES:  1
-UPDATES: 2241725
-      0 (  0.0%) data values
-  34827 (  1.6%) partial applications
-		  [2 in place, 34825 allocated new space]
-2206898 ( 98.4%) updates to existing heap objects (46 by squeezing)
-UPD_CON_IN_NEW:         0:       0      0      0      0      0      0      0      0      0
-UPD_PAP_IN_NEW:     34825:       0      0      0  34825      0      0      0      0      0
-
-NEW GEN UPDATES: 2274700 ( 99.9%)
-
-OLD GEN UPDATES: 1852 (  0.1%)
-
-Total bytes copied during GC: 190096
-
-**************************************************
-3647137 ALLOC_HEAP_ctr
-11882004 ALLOC_HEAP_tot
-  69647 ALLOC_FUN_ctr
-  69647 ALLOC_FUN_adm
-  69644 ALLOC_FUN_gds
-  34819 ALLOC_FUN_slp
-  34831 ALLOC_FUN_hst_0
-  34816 ALLOC_FUN_hst_1
-      0 ALLOC_FUN_hst_2
-      0 ALLOC_FUN_hst_3
-      0 ALLOC_FUN_hst_4
-2382937 ALLOC_UP_THK_ctr
-      0 ALLOC_SE_THK_ctr
- 308906 ENT_IND_ctr
-      0 E!NT_PERM_IND_ctr requires +RTS -Z
-[... lots more info omitted ...]
-      0 GC_SEL_ABANDONED_ctr
-      0 GC_SEL_MINOR_ctr
-      0 GC_SEL_MAJOR_ctr
-      0 GC_FAILED_PROMOTION_ctr
-  47524 GC_WORDS_COPIED_ctr
-</verb> </tscreen>
-
-The formatting of the information above the row of asterisks is
-subject to change, but hopefully provides a useful human-readable
-summary.  Below the asterisks <em>all counters</em> maintained by the
-ticky-ticky system are dumped, in a format intended to be
-machine-readable: zero or more spaces, an integer, a space, the
-counter name, and a newline.
-
-In fact, not <em>all</em> counters are necessarily dumped; compile- or
-run-time flags can render certain counters invalid.  In this case,
-either the counter will simply not appear, or it will appear with a
-modified counter name, possibly along with an explanation for the
-omission (notice @ENT_PERM_IND_ctr@ appears with an inserted @!@
-above).  Software analysing this output should always check that it
-has the counters it expects.  Also, beware: some of the counters can
-have <em>large</em> values!
-<p>
-
-
-
diff --git a/ghc/docs/users_guide/release-notes.vsgml b/ghc/docs/users_guide/release-notes.vsgml
deleted file mode 100644
index 9e21910..0000000
--- a/ghc/docs/users_guide/release-notes.vsgml
+++ /dev/null
@@ -1,9 +0,0 @@
-<sect1>Compiler release notes
-<p>
-
-<itemize>
-<item> To reflect the fact that the <tt/Pretty/ library is part of
-the common Hugs / GHC extension libraries, <tt/Pretty/ has been moved
-from the <tt/misc/ library to <tt/exts/, i.e., only <tt/syslib exts/
-should be required to get at these extension libraries.
-</itemize>
diff --git a/ghc/docs/users_guide/release.vsgml b/ghc/docs/users_guide/release.vsgml
deleted file mode 100644
index a0f77b5..0000000
--- a/ghc/docs/users_guide/release.vsgml
+++ /dev/null
@@ -1,13 +0,0 @@
-% NOTE TO MAINTAINERS: the way these notes are organized:
-%   (1) What's new in the current release
-%   (2) What's next ("real soon now")
-%   (3) What was new in previous releases (reverse chronological order)
-%   (4) anything else
-%
-% Remember: this isn't the compiler documentation! -- it's just
-% pointers to it.  Mentioning something in the release notes is not
-% the same as documenting it.
-
-<sect>Release notes
-<label id="release-notes">
-<p>
diff --git a/ghc/docs/users_guide/runtime_control.vsgml b/ghc/docs/users_guide/runtime_control.vsgml
deleted file mode 100644
index 04caf42..0000000
--- a/ghc/docs/users_guide/runtime_control.vsgml
+++ /dev/null
@@ -1,414 +0,0 @@
-%************************************************************************
-%*                                                                      *
-<sect1>Running a compiled program
-<label id="runtime-control">
-<p>
-<nidx>runtime control of Haskell programs</nidx>
-<nidx>running, compiled program</nidx>
-<nidx>RTS options</nidx>
-%*                                                                      *
-%************************************************************************
-
-To make an executable program, the GHC system compiles your code and
-then links it with a non-trivial runtime system (RTS), which handles
-storage management, profiling, etc.
-
-You have some control over the behaviour of the RTS, by giving special
-command-line arguments to your program.
-
-When your Haskell program starts up, its RTS extracts command-line
-arguments bracketed between @+RTS@<nidx>+RTS option</nidx> and
-@-RTS@<nidx>-RTS option</nidx> as its own.  For example:
-
-<tscreen><verb>
-% ./a.out -f +RTS -p -S -RTS -h foo bar
-</verb></tscreen>
-
-The RTS will snaffle @-p -S@ for itself, and the remaining arguments
-@-f -h foo bar@ will be handed to your program if/when it calls
-@System.getArgs@.
-
-No @-RTS@ option is required if the runtime-system options extend to
-the end of the command line, as in this example:
-
-<tscreen><verb>
-% hls -ltr /usr/etc +RTS -A5m
-</verb></tscreen>
-
-If you absolutely positively want all the rest of the options in a
-command line to go to the program (and not the RTS), use a
-@--RTS@<nidx>--RTS option</nidx>.
-
-As always, for RTS options that take @<size>@s: If the last
-character of @size@ is a K or k, multiply by 1000; if an M or m, by
-1,000,000; if a G or G, by 1,000,000,000.  (And any wraparound in the
-counters is <em>your</em> fault!)
-
-Giving a @+RTS -f@<nidx>-f RTS option</nidx> option will print out the
-RTS options actually available in your program (which vary, depending
-on how you compiled).
-
-NOTE: to send RTS options to the compiler itself, you need to prefix
-the option with @-optCrts@, eg. to increase the maximum heap size for
-a compilation to 128M, you would add @-optCrts-M128m@ to the command
-line.  The compiler understands some options directly without needing
-@-optCrts@: these are @-H@ and @-K@.
-
-%************************************************************************
-%*                                                                      *
-<sect2>RTS options to control the garbage-collector
-<label id="rts-options-gc">
-<p>
-<nidx>RTS options, garbage-collection</nidx>
-%*                                                                      *
-%************************************************************************
-
-There are several options to give you precise control over garbage
-collection.  Hopefully, you won't need any of these in normal
-operation, but there are several things that can be tweaked for
-maximum performance.
-
-<descrip>
-<tag>@-A<size>@:</tag>
-<nidx>-A&lt;size&gt; RTS option</nidx>
-<nidx>allocation area, size</nidx>
-
-[Default: 256k] Set the allocation area size used by the garbage
-collector.  The allocation area (actually generation 0 step 0) is
-fixed and is never resized (unless you use <tt/-H/, below).
-
-Increasing the allocation area size may or may not give better
-performance (a bigger allocation area means worse cache behaviour but
-fewer garbage collections and less promotion).
-
-With only 1 generation (<tt/-G1/) the <tt/-A/ option specifies the
-minimum allocation area, since the actual size of the allocation area
-will be resized according to the amount of data in the heap (see
-<tt/-F/, below).
-
-<tag>@-F<factor>@:</tag>
-<nidx>-F&lt;factor&gt; RTS option</nidx>
-<nidx>heap size, factor</nidx>
-
-[Default: 2] This option controls the amount of memory reserved for
-the older generations (and in the case of a two space collector the
-size of the allocation area) as a factor of the amount of live data.
-For example, if there was 2M of live data in the oldest generation
-when we last collected it, then by default we'll wait until it grows
-to 4M before collecting it again.
-
-The default seems to work well here.  If you have plenty of memory, it
-is usually better to use <tt/-H&lt;size&gt;/ than to increase
-<tt/-F&lt;factor&gt;/.
-
-The <tt/-F/ setting will be automatically reduced by the garbage
-collector when the maximum heap size (the <tt/-M&lt;size&gt;/ setting)
-is approaching.
-
-<tag>@-G<generations>@:</tag>
-<nidx>-G&lt;generations&gt; RTS option</nidx>
-<nidx>generations, number of</nidx>
-
-[Default: 2] Set the number of generations used by the garbage
-collector.  The default of 2 seems to be good, but the garbage
-collector can support any number of generations.  Anything larger than
-about 4 is probably not a good idea unless your program runs for a
-<em/long/ time, because the oldest generation will never get
-collected.
-
-Specifying 1 generation with @+RTS -G1@ gives you a simple 2-space
-collector, as you would expect.  In a 2-space collector, the @-A@
-option (see above) specifies the <em/minimum/ allocation area size,
-since the allocation area will grow with the amount of live data in
-the heap.  In a multi-generational collector the allocation area is a
-fixed size (unless you use the <tt/-H/ option, see below).
-
-<tag>@-H<size>@:</tag>
-<nidx>-H&lt;size&gt; RTS option</nidx>
-<nidx>heap size, suggested</nidx>
-
-[Default: 0] This option provides a "suggested heap size" for the
-garbage collector.  The garbage collector will use about this much
-memory until the program residency grows and the heap size needs to be
-expanded to retain reasonable performance.
-
-By default, the heap will start small, and grow and shrink as
-necessary.  This can be bad for performance, so if you have plenty of
-memory it's worthwhile supplying a big <tt/-H&lt;size&gt/.  For
-improving GC performance, using <tt/-H&lt;size&gt/ is usually a better
-bet than <tt/-A&lt;size&gt/.
-
-<tag>@-k<size>@:</tag>
-<nidx>-k&lt;size&gt; RTS option</nidx>
-<nidx>stack, minimum size</nidx>
-
-[Default: 1k] Set the initial stack size for new threads.  Thread
-stacks (including the main thread's stack) live on the heap, and grow
-as required.  The default value is good for concurrent applications
-with lots of small threads; if your program doesn't fit this model
-then increasing this option may help performance.
-
-The main thread is normally started with a slightly larger heap to cut
-down on unnecessary stack growth while the program is starting up.
-
-<tag>@-K<size>@:</tag>
-<nidx>-K&lt;size&gt; RTS option</nidx>
-<nidx>stack, maximum size</nidx>
-
-[Default: 1M] Set the maximum stack size for an individual thread to
-@<size>@ bytes.  This option is there purely to stop the program
-eating up all the available memory in the machine if it gets into an
-infinite loop.
-
-<tag>@-m<n>@:</tag>
-<nidx>-m&lt;n&gt; RTS option</nidx>
-Minimum \% @<n>@ of heap which must be available for allocation.
-The default is 3\%.
-<nidx>heap, minimum free</nidx>
-
-<tag>@-M<size>@:</tag>
-<nidx>-M&lt;size&gt; RTS option</nidx>
-<nidx>heap size, maximum</nidx>
-
-[Default: 64M] Set the maximum heap size to @<size>@ bytes.  The heap
-normally grows and shrinks according to the memory requirements of the
-program.  The only reason for having this option is to stop the heap
-growing without bound and filling up all the available swap space,
-which at the least will result in the program being summarily killed
-by the operating system.
-
-<tag>@-s<file>@ or @-S<file>@:</tag>
-<nidx>-S&lt;file&gt; RTS option</nidx>
-<nidx>-s&lt;file&gt; RTS option</nidx>
-Write modest (@-s@) or verbose (@-S@) garbage-collector
-statistics into file @<file>@. The default @<file>@ is
-@<program>@@.stat@. The @<file>@ @stderr@ is treated
-specially, with the output really being sent to @stderr@.
-
-This option is useful for watching how the storage manager adjusts the
-heap size based on the current amount of live data.
-
-% ToDo: --SDM
-%For some garbage collectors (not including the default one, sadly),
-%you can convert the @-S@ output into a residency graph (in
-%PostScript), using the @stat2resid@<nidx>stat2resid</nidx> utility in
-%the GHC distribution (@ghc/utils/stat2resid@).
-
-% <tag>@-j<size>@:</tag>
-% <nidx>-j&lt;size&gt; RTS option</nidx>
-% Force a major garbage collection every @<size>@ bytes.  (Normally
-% used because you're keen on getting major-GC stats, notably heap residency
-% info.)
-
-</descrip>
-
-%************************************************************************
-%*                                                                      *
-<sect2>RTS options for profiling and Concurrent/Parallel Haskell
-<p>
-%*                                                                      *
-%************************************************************************
-
-The RTS options related to profiling are described in Section <ref
-name="How to control your profiled program at runtime"
-id="prof-rts-options">; and those for concurrent/parallel stuff, in
-Section <ref name="RTS options for Concurrent/Parallel Haskell"
-id="parallel-rts-opts">.
-
-%************************************************************************
-%*                                                                      *
-<sect2>RTS options for hackers, debuggers, and over-interested souls
-<p>
-<nidx>RTS options, hacking/debugging</nidx>
-%*                                                                      *
-%************************************************************************
-
-These RTS options might be used (a)~to avoid a GHC bug, (b)~to see
-``what's really happening'', or (c)~because you feel like it.  Not
-recommended for everyday use!
-
-<descrip>
-<tag>@-B@:</tag>
-<nidx>-B RTS option</nidx>
-Sound the bell at the start of each (major) garbage collection.
-
-Oddly enough, people really do use this option!  Our pal in Durham
-(England), Paul Callaghan, writes: ``Some people here use it for a
-variety of purposes---honestly!---e.g., confirmation that the
-code/machine is doing something, infinite loop detection, gauging cost
-of recently added code. Certain people can even tell what stage [the
-program] is in by the beep pattern. But the major use is for annoying
-others in the same office...''
-
-<tag>@-r<file>@:</tag>
-<nidx>-r &lt;file&gt; RTS option</nidx>
-<nidx>ticky ticky profiling</nidx>
-Produce ``ticky-ticky'' statistics at the end of the program run.
-The @<file>@ business works just like on the @-S@ RTS option (above).
-
-``Ticky-ticky'' statistics are counts of various program actions
-(updates, enters, etc.)  The program must have been compiled using
-@-ticky@<nidx>-ticky option</nidx> (a.k.a. ``ticky-ticky profiling''),
-and, for it to be really useful, linked with suitable system
-libraries.  Not a trivial undertaking: consult the installation guide
-on how to set things up for easy ``ticky-ticky'' profiling.  For more
-information, see Section <ref name="Using ``ticky-ticky'' profiling
-(for implementors)" id="ticky-ticky">.
-
-<tag>@-xc@:</tag>
-<nidx>-xc RTS option</nidx>
-<nidx>cost centre display on exception</nidx>
-Display the current cost centre stack whenever an exception is
-raised.  The program must have been compiled with profiling turned on:
-see Section <ref name="Profiling" id="profiling">.  This feature is
-experimental; one day it will display the information only on
-<em>uncaught</em> exceptions.
-
-<tag>@-D<num>@:</tag>
-<nidx>-D RTS option</nidx>
-An RTS debugging flag; varying quantities of output depending on which
-bits are set in @<num>@.  Only works if the RTS was compiled with the
-@DEBUG@ option.
-
-% Blackholing can't be turned off in new RTS --SDM
-%
-% <tag>@-N@:</tag>
-% <nidx>-N RTS option</nidx>
-% 
-% Normally, the garbage collector black-holes closures which are being
-% evaluated, as a space-saving measure.  This option turns off
-% blackholing.  You shouldn't ever need to use it.
-% 
-% Historical note: this option used to be used to work around a problem
-% with signal handling, where a signal handler might need to evaluate
-% blackholed closures.  Signal handlers are now run in a separate
-% thread, and don't suffer from this problem.
-
-<tag>@-Z@:</tag>
-<nidx>-Z RTS option</nidx>
-Turn <em>off</em> ``update-frame squeezing'' at garbage-collection
-time.  (There's no particularly good reason to turn it off, except to
-ensure the accuracy of certain data collected regarding thunk entry
-counts.)
-</descrip>
-
-%************************************************************************
-%*                                                                      *
-<sect2>``Hooks'' to change RTS behaviour
-<label id="rts-hooks">
-<p>
-<nidx>hooks, RTS</nidx>
-<nidx>RTS hooks</nidx>
-<nidx>RTS behaviour, changing</nidx>
-%*                                                                      *
-%************************************************************************
-
-GHC lets you exercise rudimentary control over the RTS settings for
-any given program, by compiling in a ``hook'' that is called by the
-run-time system.  The RTS contains stub definitions for all these
-hooks, but by writing your own version and linking it on the GHC
-command line, you can override the defaults.
-
-The function @defaultsHook@<nidx>defaultHook</nidx> lets you change various
-RTS options.  The commonest use for this is to give your program a
-default heap and/or stack size that is greater than the default.  For
-example, to set @-H8m -K1m@:
-
-<tscreen><verb>
-#include "Rts.h"
-#include "RtsFlags.h"
-void defaultsHook (void) {
-   RTSflags.GcFlags.stksSize =  1000002 / sizeof(W_);
-   RTSflags.GcFlags.heapSize =  8000002 / sizeof(W_);
-}
-</verb></tscreen>
-
-Don't use powers of two for heap/stack sizes: these are more likely to
-interact badly with direct-mapped caches.  The full set of flags is
-defined in @ghc/rts/RtsFlags.h@ the the GHC source tree.
-
-You can also change the messages printed when the runtime system
-``blows up,'' e.g., on stack overflow.  The hooks for these are as
-follows:
-
-<descrip>
-<tag>@void ErrorHdrHook (FILE *)@:</tag>
-<nidx>ErrorHdrHook</nidx>
-What's printed out before the message from @error@.
-
-<tag>@void OutOfHeapHook (unsigned long, unsigned long)@:</tag>
-<nidx>OutOfHeapHook</nidx>
-The heap-overflow message.
-
-<tag>@void StackOverflowHook (long int)@:</tag>
-<nidx>StackOverflowHook</nidx>
-The stack-overflow message.
-
-<tag>@void MallocFailHook (long int)@:</tag>
-<nidx>MallocFailHook</nidx>
-The message printed if @malloc@ fails.
-
-<tag>@void PatErrorHdrHook (FILE *)@:</tag>
-<nidx>PatErrorHdrHook</nidx>
-The message printed if a pattern-match fails (the failures
-that were not handled by the Haskell programmer).
-
-<tag>@void PreTraceHook (FILE *)@:</tag>
-<nidx>PreTraceHook</nidx>
-What's printed out before a @trace@ message.
-
-<tag>@void PostTraceHook (FILE *)@:</tag>
-<nidx>PostTraceHook</nidx>
-What's printed out after a @trace@ message.
-</descrip>
-
-For example, here is the ``hooks'' code used by GHC itself:
-<tscreen><verb>
-#include <stdio.h>
-#define W_ unsigned long int
-#define I_ long int
-
-void
-ErrorHdrHook (FILE *where)
-{
-    fprintf(where, "\n"); /* no "Fail: " */
-}
-
-void
-OutOfHeapHook (W_ request_size, W_ heap_size) /* both sizes in bytes */
-{
-    fprintf(stderr, "GHC's heap exhausted;\nwhile trying to 
-	allocate %lu bytes in a %lu-byte heap;\nuse the `-H<size>'
-	option to increase the total heap size.\n",
-	request_size,
-	heap_size);
-}
-
-void
-StackOverflowHook (I_ stack_size)    /* in bytes */
-{
-    fprintf(stderr, "GHC stack-space overflow: current size
-	%ld bytes.\nUse the `-K<size>' option to increase it.\n",
-	stack_size);
-}
-
-void
-PatErrorHdrHook (FILE *where)
-{
-    fprintf(where, "\n*** Pattern-matching error within GHC!\n\n
-	This is a compiler bug; please report it to
-	glasgow-haskell-bugs@haskell.org.\n\nFail: ");
-}
-
-void
-PreTraceHook (FILE *where)
-{
-    fprintf(where, "\n"); /* not "Trace On" */
-}
-
-void
-PostTraceHook (FILE *where)
-{
-    fprintf(where, "\n"); /* not "Trace Off" */
-}
-</verb></tscreen>
diff --git a/ghc/docs/users_guide/sooner.vsgml b/ghc/docs/users_guide/sooner.vsgml
deleted file mode 100644
index 0957f45..0000000
--- a/ghc/docs/users_guide/sooner.vsgml
+++ /dev/null
@@ -1,411 +0,0 @@
-%************************************************************************
-%*                                                                      *
-<sect>Advice on: sooner, faster, smaller, stingier
-<label id="sooner-faster-quicker">
-<p>
-%*                                                                      *
-%************************************************************************
-
-Please advise us of other ``helpful hints'' that should go here!
-
-%************************************************************************
-%*                                                                      *
-<sect1>Sooner: producing a program more quickly
-<label id="sooner">
-<p>
-<nidx>compiling faster</nidx>
-<nidx>faster compiling</nidx>
-%*                                                                      *
-%************************************************************************
-
-<descrip>
-%----------------------------------------------------------------
-<tag>Don't use @-O@ or (especially) @-O2@:</tag>
-By using them, you are telling GHC that you are willing to suffer
-longer compilation times for better-quality code.
-
-GHC is surprisingly zippy for normal compilations without @-O@!
-
-%----------------------------------------------------------------
-<tag>Use more memory:</tag>
-Within reason, more memory for heap space means less garbage
-collection for GHC, which means less compilation time.  If you use
-the @-Rgc-stats@ option, you'll get a garbage-collector report.
-(Again, you can use the cheap-and-nasty @-optCrts-Sstderr@ option to
-send the GC stats straight to standard error.)
-
-If it says you're using more than 20\% of total time in garbage
-collecting, then more memory would help.
-
-If the heap size is approaching the maximum (64M by default), and you
-have lots of memory, try increasing the maximum with the
-@-M<size>@<nidx>-M&lt;size&gt; option</nidx> option, e.g.: @ghc -c -O
--M16m Foo.hs@.
-
-Increasing the default allocation area size used by the compiler's RTS
-might also help: use the @-A<size>@<nidx>-A&lt;size&gt; option</nidx>
-option.
-
-If GHC persists in being a bad memory citizen, please report it as a
-bug.
-
-%----------------------------------------------------------------
-<tag>Don't use too much memory!</tag>
-As soon as GHC plus its ``fellow citizens'' (other processes on your
-machine) start using more than the <em>real memory</em> on your
-machine, and the machine starts ``thrashing,'' <em>the party is
-over</em>.  Compile times will be worse than terrible!  Use something
-like the csh-builtin @time@ command to get a report on how many page
-faults you're getting.
-
-If you don't know what virtual memory, thrashing, and page faults are,
-or you don't know the memory configuration of your machine,
-<em>don't</em> try to be clever about memory use: you'll just make
-your life a misery (and for other people, too, probably).
-
-%----------------------------------------------------------------
-<tag>Try to use local disks when linking:</tag>
-Because Haskell objects and libraries tend to be large, it can take
-many real seconds to slurp the bits to/from a remote filesystem.
-
-It would be quite sensible to <em>compile</em> on a fast machine using
-remotely-mounted disks; then <em>link</em> on a slow machine that had
-your disks directly mounted.
-
-%----------------------------------------------------------------
-<tag>Don't derive/use @Read@ unnecessarily:</tag>
-It's ugly and slow.
-
-%----------------------------------------------------------------
-<tag>GHC compiles some program constructs slowly:</tag>
-Deeply-nested list comprehensions seem to be one such; in the past,
-very large constant tables were bad, too.
-
-We'd rather you reported such behaviour as a bug, so that we can try
-to correct it.
-
-The parts of the compiler that seem most prone to wandering off for a
-long time are the abstract interpreters (strictness and update
-analysers).  You can turn these off individually with
-@-fno-strictness@<nidx>-fno-strictness anti-option</nidx> and
-@-fno-update-analysis@.<nidx>-fno-update-analysis anti-option</nidx>
-
-To figure out which part of the compiler is badly behaved, the
-@-dshow-passes@<nidx>-dshow-passes option</nidx> option is your
-friend.
-
-If your module has big wads of constant data, GHC may produce a huge
-basic block that will cause the native-code generator's register
-allocator to founder.  Bring on @-fvia-C@<nidx>-fvia-C option</nidx>
-(not that GCC will be that quick about it, either).
-
-%----------------------------------------------------------------
-<tag>Avoid the consistency-check on linking:</tag>
-
-Use @-no-link-chk@<nidx>-no-link-chk</nidx>; saves effort.  This is
-probably safe in a I-only-compile-things-one-way setup.
-
-%----------------------------------------------------------------
-<tag>Explicit @import@ declarations:</tag>
-
-Instead of saying @import Foo@, say @import Foo (...stuff I want...)@.
-
-Truthfully, the reduction on compilation time will be very small.
-However, judicious use of @import@ declarations can make a
-program easier to understand, so it may be a good idea anyway.
-</descrip>
-
-%************************************************************************
-%*                                                                      *
-<sect1>Faster: producing a program that runs quicker
-<label id="faster">
-<p>
-<nidx>faster programs, how to produce</nidx>
-%*                                                                      *
-%************************************************************************
-
-The key tool to use in making your Haskell program run faster are
-GHC's profiling facilities, described separately in Section <ref
-name="Profiling" id="profiling">.  There is <em>no substitute</em> for
-finding where your program's time/space is <em>really</em> going, as
-opposed to where you imagine it is going.
-
-Another point to bear in mind: By far the best way to improve a
-program's performance <em>dramatically</em> is to use better
-algorithms.  Once profiling has thrown the spotlight on the guilty
-time-consumer(s), it may be better to re-think your program than to
-try all the tweaks listed below.
-
-Another extremely efficient way to make your program snappy is to use
-library code that has been Seriously Tuned By Someone Else.  You
-<em>might</em> be able to write a better quicksort than the one in the
-HBC library, but it will take you much longer than typing @import
-QSort@.  (Incidentally, it doesn't hurt if the Someone Else is Lennart
-Augustsson.)
-
-Please report any overly-slow GHC-compiled programs.  The current
-definition of ``overly-slow'' is ``the HBC-compiled version ran
-faster''...
-
-<descrip>
-%----------------------------------------------------------------
-<tag>Optimise, using @-O@ or @-O2@:</tag> This is the most basic way
-to make your program go faster.  Compilation time will be slower,
-especially with @-O2@.
-
-At present, @-O2@ is nearly indistinguishable from @-O@.
-
-%----------------------------------------------------------------
-<tag>Compile via C and crank up GCC:</tag> Even with @-O@, GHC tries to
-use a native-code generator, if available.  But the native
-code-generator is designed to be quick, not mind-bogglingly clever.
-Better to let GCC have a go, as it tries much harder on register
-allocation, etc.
-
-So, when we want very fast code, we use: @-O -fvia-C -O2-for-C@.
-
-%----------------------------------------------------------------
-<tag>Overloaded functions are not your friend:</tag>
-Haskell's overloading (using type classes) is elegant, neat, etc.,
-etc., but it is death to performance if left to linger in an inner
-loop.  How can you squash it?
-
-<descrip>
-<tag>Give explicit type signatures:</tag>
-Signatures are the basic trick; putting them on exported, top-level
-functions is good software-engineering practice, anyway.  (Tip: using
-@-fwarn-missing-signatures@<nidx>-fwarn-missing-signatures
-option</nidx> can help enforce good signature-practice).
-
-The automatic specialisation of overloaded functions (with @-O@)
-should take care of overloaded local and/or unexported functions.
-
-<tag>Use @SPECIALIZE@ pragmas:</tag>
-<nidx>SPECIALIZE pragma</nidx>
-<nidx>overloading, death to</nidx>
-
-Specialize the overloading on key functions in your program.  See
-Sections <ref name="SPECIALIZE pragmas" id="specialize-pragma"> and
-<ref name="SPECIALIZE instance pragmas" id="specialize-instance-pragma">
-
-% See also: overlapping instances, in Section <ref name="``HBC-ish''
-% extensions implemented by GHC" id="glasgow-hbc-exts">.  They are to
-% @SPECIALIZE instance@ pragmas what @= blah@ hacks are to @SPECIALIZE@
-% (value) pragmas...
-
-%ToDo: there's nothing like this at the moment: --SDM
-
-% <tag>``How do I know what's happening with specialisations?'':</tag>
-
-% The @-fshow-specialisations@<nidx>-fshow-specialisations option</nidx>
-% will show the specialisations that actually take place.
-
-% The @-fshow-import-specs@<nidx>-fshow-import-specs option</nidx> will
-% show the specialisations that GHC <em>wished</em> were available, but
-% were not.  You can add the relevant pragmas to your code if you wish.
-
-% You're a bit stuck if the desired specialisation is of a Prelude
-% function.  If it's Really Important, you can just snap a copy of the
-% Prelude code, rename it, and then SPECIALIZE that to your heart's
-% content.
-
-<tag>``But how do I know where overloading is creeping in?'':</tag>
-
-A low-tech way: grep (search) your interface files for overloaded
-type signatures; e.g.,:
-<tscreen><verb>
-% egrep '^[a-z].*::.*=>' *.hi
-</verb></tscreen>
-</descrip>
-
-%----------------------------------------------------------------
-<tag>Strict functions are your dear friends:</tag>
-and, among other things, lazy pattern-matching is your enemy.
-
-(If you don't know what a ``strict function'' is, please consult a
-functional-programming textbook.  A sentence or two of
-explanation here probably would not do much good.)
-
-Consider these two code fragments:
-<tscreen><verb>
-f (Wibble x y) =  ... # strict
-
-f arg = let { (Wibble x y) = arg } in ... # lazy
-</verb></tscreen>
-The former will result in far better code.
-
-A less contrived example shows the use of @cases@ instead
-of @lets@ to get stricter code (a good thing):
-<tscreen><verb>
-f (Wibble x y)  # beautiful but slow
-  = let
-        (a1, b1, c1) = unpackFoo x
-        (a2, b2, c2) = unpackFoo y
-    in ...
-
-f (Wibble x y)  # ugly, and proud of it
-  = case (unpackFoo x) of { (a1, b1, c1) ->
-    case (unpackFoo y) of { (a2, b2, c2) ->
-    ...
-    }}
-</verb></tscreen>
-
-%----------------------------------------------------------------
-<tag>GHC loves single-constructor data-types:</tag>
-
-It's all the better if a function is strict in a single-constructor
-type (a type with only one data-constructor; for example, tuples are
-single-constructor types).
-
-%----------------------------------------------------------------
-<tag>Newtypes are better than datatypes:</tag>
-
-If your datatype has a single constructor with a single field, use a
-@newtype@ declaration instead of a @data@ declaration.  The @newtype@
-will be optimised away in most cases.
-
-%----------------------------------------------------------------
-<tag>``How do I find out a function's strictness?''</tag>
-
-Don't guess---look it up.
-
-Look for your function in the interface file, then for the third field
-in the pragma; it should say @_S_ <string>@.  The @<string>@
-gives the strictness of the function's arguments.  @L@ is lazy
-(bad), @S@ and @E@ are strict (good), @P@ is ``primitive'' (good),
-@U(...)@ is strict and
-``unpackable'' (very good), and @A@ is absent (very good).
-
-For an ``unpackable'' @U(...)@ argument, the info inside
-tells the strictness of its components.  So, if the argument is a
-pair, and it says @U(AU(LSS))@, that means ``the first component of the
-pair isn't used; the second component is itself unpackable, with three
-components (lazy in the first, strict in the second \& third).''
-
-If the function isn't exported, just compile with the extra flag @-ddump-simpl@;
-next to the signature for any binder, it will print the self-same
-pragmatic information as would be put in an interface file.
-(Besides, Core syntax is fun to look at!)
-
-%----------------------------------------------------------------
-<tag>Force key functions to be @INLINE@d (esp. monads):</tag>
-
-Placing @INLINE@ pragmas on certain functions that are used a lot can
-have a dramatic effect.  See Section <ref name="INLINE pragmas"
-id="inline-pragma">.
-
-%----------------------------------------------------------------
-<tag>Explicit @export@ list:</tag>
-If you do not have an explicit export list in a module, GHC must
-assume that everything in that module will be exported.  This has
-various pessimising effects.  For example, if a bit of code is actually
-<em>unused</em> (perhaps because of unfolding effects), GHC will not be
-able to throw it away, because it is exported and some other module
-may be relying on its existence.
-
-GHC can be quite a bit more aggressive with pieces of code if it knows
-they are not exported.
-
-%----------------------------------------------------------------
-<tag>Look at the Core syntax!</tag>
-(The form in which GHC manipulates your code.)  Just run your
-compilation with @-ddump-simpl@ (don't forget the @-O@).
-
-If profiling has pointed the finger at particular functions, look at
-their Core code.  @lets@ are bad, @cases@ are good, dictionaries
-(@d.<Class>.<Unique>@) [or anything overloading-ish] are bad,
-nested lambdas are bad, explicit data constructors are good, primitive
-operations (e.g., @eqInt#@) are good, ...
-
-%----------------------------------------------------------------
-<tag>Use unboxed types (a GHC extension):</tag>
-When you are <em>really</em> desperate for speed, and you want to get
-right down to the ``raw bits.''  Please see Section <ref name="Unboxed
-types" id="glasgow-unboxed"> for some information about using unboxed
-types.
-
-%----------------------------------------------------------------
-<tag>Use @_ccall_s@ (a GHC extension) to plug into fast libraries:</tag>
-This may take real work, but... There exist piles of
-massively-tuned library code, and the best thing is not
-to compete with it, but link with it.
-
-Section <ref name="Calling~C directly from Haskell" id="glasgow-ccalls"> says a little about how to use C calls.
-
-%----------------------------------------------------------------
-<tag>Don't use @Float@s:</tag>
-We don't provide specialisations of Prelude functions for @Float@
-(but we do for @Double@).  If you end up executing overloaded
-code, you will lose on performance, perhaps badly.
-
-@Floats@ (probably 32-bits) are almost always a bad idea, anyway,
-unless you Really Know What You Are Doing.  Use Doubles.  There's
-rarely a speed disadvantage---modern machines will use the same
-floating-point unit for both.  With @Doubles@, you are much less
-likely to hang yourself with numerical errors.
-
-One time when @Float@ might be a good idea is if you have a
-<em>lot</em> of them, say a giant array of @Float@s.  They take up
-half the space in the heap compared to @Doubles@.  However, this isn't
-true on a 64-bit machine.
-
-%----------------------------------------------------------------
-<tag>Use a bigger heap!</tag>
-
-If your program's GC stats (@-S@<nidx>-S RTS option</nidx> RTS option)
-indicate that it's doing lots of garbage-collection (say, more than
-20\% of execution time), more memory might help---with the
-@-M<size>@<nidx>-M&lt;size&gt; RTS option</nidx> or
-@-A<size>@<nidx>-A&lt;size&gt; RTS option</nidx> RTS options (see
-Section <ref name="RTS options to control the garbage-collector"
-id="rts-options-gc">).
-</descrip>
-
-%************************************************************************
-%*                                                                      *
-<sect1>Smaller: producing a program that is smaller
-<label id="smaller">
-<p>
-<nidx>smaller programs, how to produce</nidx>
-%*                                                                      *
-%************************************************************************
-
-Decrease the ``go-for-it'' threshold for unfolding smallish
-expressions.  Give a
-@-funfolding-use-threshold0@<nidx>-funfolding-use-threshold0
-option</nidx> option for the extreme case. (``Only unfoldings with
-zero cost should proceed.'')  Warning: except in certain specialiised
-cases (like Happy parsers) this is likely to actually
-<em>increase</em> the size of your program, because unfolding
-generally enables extra simplifying optimisations to be performed.
-
-Avoid @Read@.
-
-Use @strip@ on your executables.
-
-%************************************************************************
-%*                                                                      *
-<sect1>Stingier: producing a program that gobbles less heap space
-<label id="stingier">
-<p>
-<nidx>memory, using less heap</nidx>
-<nidx>space-leaks, avoiding</nidx>
-<nidx>heap space, using less</nidx>
-%*                                                                      *
-%************************************************************************
-
-``I think I have a space leak...''  Re-run your program with
-@+RTS -Sstderr@,<nidx>-Sstderr RTS option</nidx> and remove all doubt!
-(You'll see the heap usage get bigger and bigger...)  [Hmmm... this
-might be even easier with the @-F2s@<nidx>-F2s RTS option</nidx> RTS
-option; so...  @./a.out +RTS -Sstderr -F2s@...]
-
-Once again, the profiling facilities (Section <ref name="Profiling"
-id="profiling">) are the basic tool for demystifying the space
-behaviour of your program.
-
-Strict functions are good for space usage, as they are for time, as
-discussed in the previous section.  Strict functions get right down to
-business, rather than filling up the heap with closures (the system's
-notes to itself about how to evaluate something, should it eventually
-be required).
diff --git a/ghc/docs/users_guide/users_guide.vsgml b/ghc/docs/users_guide/users_guide.vsgml
deleted file mode 100644
index 96d8909..0000000
--- a/ghc/docs/users_guide/users_guide.vsgml
+++ /dev/null
@@ -1,47 +0,0 @@
-<!doctype linuxdoc system [
-	<!ENTITY intro      	SYSTEM "intro.sgml" >
-	<!ENTITY relnotes 	SYSTEM "4-04-notes.sgml" >
-	<!ENTITY using      	SYSTEM "using.sgml" >
-	<!ENTITY runtime  	SYSTEM "runtime_control.sgml" >
-	<!ENTITY prof   	SYSTEM "profiling.sgml" >
-	<!ENTITY debug  	SYSTEM "debugging.sgml" >
-	<!ENTITY sooner 	SYSTEM "sooner.sgml" >
-	<!ENTITY lang 		SYSTEM "lang.sgml" >
-	<!ENTITY glaexts  	SYSTEM "glasgow_exts.sgml" >
-	<!ENTITY parallel  	SYSTEM "parallel.sgml" >
-	<!ENTITY vs-hs  	SYSTEM "vs_haskell.sgml" >
-	<!ENTITY libs	 	SYSTEM "libraries.sgml" >
-	<!ENTITY posix   	SYSTEM "posix.sgml" >
-	<!ENTITY libmisc   	SYSTEM "libmisc.sgml" >
-	<!ENTITY wrong	 	SYSTEM "gone_wrong.sgml" >
-	<!ENTITY utils 		SYSTEM "utils.sgml" >
-	<!ENTITY mutablearray   SYSTEM "MutableArray.sgml">
-	<!ENTITY bytearray      SYSTEM "ByteArray.sgml">
-	<!ENTITY win32-dll      SYSTEM "win32-dlls.sgml">
-]>
-<article>
-
-<title>The Glasgow Haskell Compiler User's Guide, Version~4.04
-<author>The GHC Team, 
-Email: @glasgow-haskell-{bugs,users}-request@@haskell.org@
-<toc>
-
-&intro
-&relnotes
-&using
-  &runtime
-  &debug
-&prof
-&sooner
-&lang
-  &glaexts
-  &parallel
-  &vs-hs
-&libs
-  &posix
-  &libmisc
-&wrong
-&utils
-&win32-dll
-
-</article>
diff --git a/ghc/docs/users_guide/using.vsgml b/ghc/docs/users_guide/using.vsgml
deleted file mode 100644
index 88d404a..0000000
--- a/ghc/docs/users_guide/using.vsgml
+++ /dev/null
@@ -1,1664 +0,0 @@
-<sect> Using GHC
-<label id="using-GHC">
-<p>
-<nidx>GHC, using</nidx>
-<nidx>using GHC</nidx>
-
-GHC is a command-line compiler: in order to compile a Haskell program,
-GHC must be invoked on the source file(s) by typing a command to the
-shell.  The steps involved in compiling a program can be automated
-using the @make@ tool (this is especially useful if the program
-consists of multiple source files which depend on each other).  This
-section describes how to use GHC from the command-line.
-
-%************************************************************************
-%*                                                                      *
-<sect1> Overall command-line structure
-<label id="command-line-structure">
-<p>
-<nidx>structure, command-line</nidx>
-<nidx>command-line structure</nidx>
-%*                                                                      *
-%************************************************************************
-
-An invocation of GHC takes the following form:
-
-<tscreen> <verb>
-ghc [argument...]
-</verb> </tscreen>
-
-Command-line arguments are either options or file names.
-
-Command-line options begin with @-@.  They may <em>not</em> be
-grouped: @-vO@ is different from @-v -O@.  Options need not
-precede filenames: e.g., @ghc *.o -o foo@.  All options are
-processed and then applied to all files; you cannot, for example, invoke
-@ghc -c -O1 Foo.hs -O2 Bar.hs@ to apply different optimisation
-levels to the files @Foo.hs@ and @Bar.hs@.  For conflicting
-options, e.g., @-c -S@, we reserve the right to do anything we
-want.  (Usually, the last one applies.)
-
-%************************************************************************
-%*                                                                      *
-<sect1>Meaningful file suffixes
-<label id="file-suffixes">
-<p>
-<nidx>suffixes, file</nidx>
-<nidx>file suffixes for GHC</nidx>
-%*                                                                      *
-%************************************************************************
-
-File names with ``meaningful'' suffixes (e.g., @.lhs@ or @.o@)
-cause the ``right thing'' to happen to those files.
-
-<descrip>
-<tag>@.lhs@:</tag>
-<nidx>lhs suffix</nidx>
-A ``literate Haskell'' module.
-
-<tag>@.hs@:</tag> 
-A not-so-literate Haskell module.
-
-<tag>@.hi@:</tag>
-A Haskell interface file, probably compiler-generated.
-
-<tag>@.hc@:</tag>
-Intermediate C file produced by the Haskell compiler.
-
-<tag>@.c@:</tag>
-A C~file not produced by the Haskell compiler.
-
-% <tag>@.i@:</tag>
-% C code after it has be preprocessed by the C compiler (using the
-% @-E@ flag).
-
-<tag>@.s@:</tag>
-An assembly-language source file, usually
-produced by the compiler.
-
-<tag>@.o@:</tag>
-An object file, produced by an assembler.
-</descrip>
-
-Files with other suffixes (or without suffixes) are passed straight
-to the linker.
-
-%************************************************************************
-%*                                                                      *
-<sect1>Help and verbosity options
-<label id="options-help">
-<p>
-<nidx>help options (GHC)</nidx>
-<nidx>verbose option (GHC)</nidx>
-%*                                                                      *
-%************************************************************************
-
-A good option to start with is the @-help@ (or @-?@) option.
-<nidx>-help option</nidx>
-<nidx>-? option</nidx>
-GHC spews a long message to standard output and then exits.
-
-The @-v@<nidx>-v option</nidx> option makes GHC <em>verbose</em>: it
-reports its version number and shows (on stderr) exactly how it invokes each 
-phase of the compilation system.  Moreover, it passes
-the @-v@ flag to most phases; each reports
-its version number (and possibly some other information).
-
-Please, oh please, use the @-v@ option when reporting bugs!
-Knowing that you ran the right bits in the right order is always the
-first thing we want to verify.
-
-If you're just interested in the compiler version number, the
-@--version@<nidx>--version option</nidx> option prints out a
-one-line string containing the requested info.
-
-%************************************************************************
-%*                                                                      *
-<sect1>Running the right phases in the right order
-<label id="options-order">
-<p>
-<nidx>order of passes in GHC</nidx>
-<nidx>pass ordering in GHC</nidx>
-%*                                                                      *
-%************************************************************************
-
-The basic task of the @ghc@ driver is to run each input file
-through the right phases (compiling, linking, etc.).
-
-The first phase to run is determined by the input-file suffix, and the
-last phase is determined by a flag.  If no relevant flag is present,
-then go all the way through linking.  This table summarises:
-
-<tabular ca="llll">
-Phase of the           | Suffix saying | Flag saying   | (suffix of) @@
-compilation system     | ``start here''| ``stop after''| output file @@
-@@
-literate pre-processor | .lhs          | -             | - @@
-C pre-processor (opt.) | -             | -             | - @@
-Haskell compiler       | .hs           | -C, -S        | .hc, .s @@
-C compiler (opt.)      | .hc or .c     | -S            | .s  @@
-assembler              | .s            | -c            | .o  @@
-linker                 | other         | -             | a.out @@
-</tabular>
-<nidx>-C option</nidx>
-<nidx>-S option</nidx>
-<nidx>-c option</nidx>
-
-Thus, a common invocation would be: @ghc -c Foo.hs@
-
-Note: What the Haskell compiler proper produces depends on whether a
-native-code generator is used (producing assembly language) or not
-(producing C).
-
-The option @-cpp@<nidx>-cpp option</nidx> must be given for the C
-pre-processor phase to be run, that is, the pre-processor will be run
-over your Haskell source file before continuing.
-
-The option @-E@<nidx>-E option</nidx> runs just the pre-processing
-passes of the compiler, outputting the result on stdout before
-stopping. If used in conjunction with -cpp, the output is the
-code blocks of the original (literal) source after having put it
-through the grinder that is the C pre-processor. Sans @-cpp@, the
-output is the de-litted version of the original source.
-
-The option @-optcpp-E@<nidx>-optcpp-E option</nidx> runs just the
-pre-processing stage of the C-compiling phase, sending the result to
-stdout.  (For debugging or obfuscation contests, usually.)
-
-%************************************************************************
-%*                                                                      *
-<sect1>Re-directing the compilation output(s)
-<label id="options-output">
-<p>
-<nidx>output-directing options</nidx>
-%*                                                                      *
-%************************************************************************
-
-GHC's compiled output normally goes into a @.hc@, @.o@, etc., file,
-depending on the last-run compilation phase.  The option @-o
-foo@<nidx>-o option</nidx> re-directs the output of that last-run
-phase to file @foo@.
-
-Note: this ``feature'' can be counterintuitive:
-@ghc -C -o foo.o foo.hs@ will put the intermediate C code in the
-file @foo.o@, name notwithstanding!
-
-EXOTICA: But the @-o@ option isn't of much use if you have
-<em>several</em> input files... Non-interface output files are
-normally put in the same directory as their corresponding input file
-came from.  You may specify that they be put in another directory
-using the @-odir <dir>@<nidx>-odir &lt;dir&gt; option</nidx> (the
-``Oh, dear'' option).  For example:
-
-<tscreen><verb>
-% ghc -c parse/Foo.hs parse/Bar.hs gurgle/Bumble.hs -odir `arch`
-</verb></tscreen>
-
-The output files, @Foo.o@, @Bar.o@, and @Bumble.o@ would be
-put into a subdirectory named after the architecture of the executing
-machine (@sun4@, @mips@, etc).  The directory must already
-exist; it won't be created.
-
-Note that the @-odir@ option does <em>not</em> affect where the
-interface files are put.  In the above example, they would still be
-put in @parse/Foo.hi@, @parse/Bar.hi@, and @gurgle/Bumble.hi@.
-
-MORE EXOTICA: The @-osuf <suffix>@<nidx>-osuf &lt;suffix&gt;
-option</nidx> will change the @.o@ file suffix for object files to
-whatever you specify.  (We use this in compiling the prelude.).
-Similarly, the @-hisuf <suffix>@<nidx>-hisuf &lt;suffix&gt;
-option</nidx> will change the @.hi@ file suffix for non-system
-interface files (see Section <ref name="Other options related to
-interface files" id="hi-options">).
-
-The @-hisuf@/@-osuf@ game is useful if you want to compile a program
-with both GHC and HBC (say) in the same directory.  Let HBC use the
-standard @.hi@/@.o@ suffixes; add @-hisuf g_hi -osuf g_o@ to your
-@make@ rule for GHC compiling...
-
-FURTHER EXOTICA: If you are doing a normal @.hs@-to-@.o@ compilation
-but would like to hang onto the intermediate @.hc@ C file, just
-throw in a @-keep-hc-file-too@ option<nidx>-keep-hc-file-too option</nidx>.
-If you would like to look at the assembler output, toss in a
-@-keep-s-file-too@,<nidx>-keep-s-file-too option</nidx> too.
-
-<sect2> Saving GHC's standard error output
-<label id="saving-ghc-stderr">
-<p>
-<nidx>standard error, saving</nidx>
-
-Sometimes, you may cause GHC to be rather chatty on standard error;
-with @-v@, for example.  You can instruct GHC to <em>append</em> this
-output to a particular log file with a @-odump <blah>@<nidx>-odump
-&lt;blah&gt; option</nidx> option.
-
-<sect2> Redirecting temporary files
-<label id="temp-files">
-<p>
-<nidx>temporary files, redirecting</nidx>
-
-If you have trouble because of running out of space in @/tmp@ (or
-wherever your installation thinks temporary files should go), you may
-use the @-tmpdir <dir>@<nidx>-tmpdir &lt;dir&gt; option</nidx> option
-to specify an alternate directory.  For example, @-tmpdir .@ says to
-put temporary files in the current working directory.
-
-Alternatively, use your @TMPDIR@ environment variable.<nidx>TMPDIR
-environment variable</nidx> Set it to the name of the directory where
-temporary files should be put.  GCC and other programs will honour the
-@TMPDIR@ variable as well.
-
-Even better idea: Set the @TMPDIR@ variable when building GHC, and
-never worry about @TMPDIR@ again. (see the build documentation).
-
-%************************************************************************
-%*                                                                      *
-<sect1>Warnings and sanity-checking
-<label id="options-sanity">
-<p>
-<nidx>sanity-checking options</nidx>
-<nidx>warnings</nidx>
-%*                                                                      *
-%************************************************************************
-
-GHC has a number of options that select which types of non-fatal error
-messages, otherwise known as warnings, can be generated during
-compilation.  By default, you get a standard set of warnings which are
-generally likely to indicate bugs in your program.  These are:
-@-fwarn-overlpapping-patterns@, @-fwarn-duplicate-exports@, and
-@-fwarn-missing-methods@.  The following flags are simple ways to
-select standard ``packages'' of warnings:
-
-<descrip>
-
-<tag>@-Wnot@:</tag>
-<nidx>-Wnot option</nidx>
-
-Turns off all warnings, including the standard ones.
-
-<tag>@-w@:</tag>
-<nidx>-w option</nidx>
-
-Synonym for @-Wnot@.
-
-<tag>@-W@:</tag>
-<nidx>-W option</nidx>
-
-Provides the standard warnings plus @-fwarn-incomplete-patterns@,
-@-fwarn-unused-imports@ and @-fwarn-unused-binds@.
-
-<tag>@-Wall@:</tag>
-<nidx>-Wall option</nidx>
-
-Turns on all warning options.
-
-</descrip>
-
-The full set of warning options is described below.  To turn off any
-warning, simply give the corresponding @-fno-warn-...@ option on
-the command line.
-
-<descrip>
-
-<tag>@-fwarn-name-shadowing@:</tag> 
-<nidx>-fwarn-name-shadowing option</nidx>
-<nidx>shadowing, warning</nidx>
-
-This option causes a warning to be emitted whenever an inner-scope
-value has the same name as an outer-scope value, i.e. the inner value
-shadows the outer one.  This can catch typographical errors that turn
-into hard-to-find bugs, e.g., in the inadvertent cyclic definition
-@let x = ... x ... in@.
-
-Consequently, this option does <em>not</em> allow cyclic recursive
-definitions.
-
-<tag>@-fwarn-overlapping-patterns@:</tag>
-<nidx>-fwarn-overlapping-patterns option</nidx>
-<nidx>overlapping patterns, warning</nidx>
-<nidx>patterns, overlapping</nidx>
-
-By default, the compiler will warn you if a set of patterns are
-overlapping, i.e.,
-
-<tscreen><verb>
-f :: String -> Int
-f []     = 0
-f (_:xs) = 1
-f "2"    = 2
-</verb></tscreen>
-
-where the last pattern match in @f@ won't ever be reached, as the
-second pattern overlaps it. More often than not, redundant patterns
-is a programmer mistake/error, so this option is enabled by default.
-
-<tag>@-fwarn-incomplete-patterns@:</tag>
-<nidx>-fwarn-incomplete-patterns option</nidx>
-<nidx>incomplete patterns, warning</nidx>
-<nidx>patterns, incomplete</nidx>
-
-Similarly for incomplete patterns, the function @g@ below will fail
-when applied to non-empty lists, so the compiler will emit a warning
-about this when @-fwarn-incomplete-patterns@ is enabled.
-
-<tscreen><verb>
-g [] = 2
-</verb></tscreen>
-
-This option isn't enabled be default because it can be a bit noisy,
-and it doesn't always indicate a bug in the program.  However, it's
-generally considered good practice to cover all the cases in your
-functions.
-
-<tag>@-fwarn-missing-methods@:</tag>
-<nidx>-fwarn-missing-methods option</nidx>
-<nidx>missing methods, warning</nidx>
-<nidx>methods, missing</nidx>
-
-This option is on by default, and warns you whenever an instance
-declaration is missing one or more methods, and the corresponding
-class declaration has no default declaration for them.
-
-<tag>@-fwarn-missing-fields@:</tag>
-<nidx>-fwarn-missing-fields option</nidx>
-<nidx>missing fields, warning</nidx>
-<nidx>fields, missing</nidx>
-
-This option is on by default, and warns you whenever the construction
-of a labelled field constructor isn't complete, missing initializers
-for one or more fields. While not an error (the missing fields are
-initialised with bottoms), it is often an indication of a programmer
-error.
-
-<tag>@-fwarn-unused-imports@:</tag>
-<nidx>-fwarn-unused-imports option</nidx>
-<nidx>unused imports, warning</nidx>
-<nidx>imports, unused</nidx>
-
-Report any objects that are explicitly imported but never used.
-
-<tag>@-fwarn-unused-binds@:</tag>
-<nidx>-fwarn-unused-binds option</nidx>
-<nidx>unused binds, warning</nidx>
-<nidx>binds, unused</nidx>
-
-Report any function definitions (and local bindings) which are unused.
-For top-level functions, the warning is only given if the binding is
-not exported.
-
-<tag>@-fwarn-unused-matches@:</tag>
-<nidx>-fwarn-unused-matches option</nidx>
-<nidx>unused matches, warning</nidx>
-<nidx>matches, unused</nidx>
-
-Report all unused variables which arise from pattern matches,
-including patterns consisting of a single variable.  For instance @f x
-y = []@ would report @x@ and @y@ as unused.  To eliminate the warning,
-all unused variables can be replaced with wildcards.
-
-<tag>@-fwarn-duplicate-exports@:</tag>
-<nidx>-fwarn-duplicate-exports option</nidx>
-<nidx>duplicate exports, warning</nidx>
-<nidx>export lists, duplicates</nidx>
-
-Have the compiler warn about duplicate entries in export lists. This
-is useful information if you maintain large export lists, and want to
-avoid the continued export of a definition after you've deleted (one)
-mention of it in the export list.
-
-This option is on by default.
-
-<tag><tt>-fwarn-type-defaults</tt>:</tag>
-<nidx>-fwarn-type-defaults option</nidx>
-<nidx>defaulting mechanism, warning</nidx>
-
-Have the compiler warn/inform you where in your source the Haskell
-defaulting mechanism for numeric types kicks in. This is useful
-information when converting code from a context that assumed one
-default into one with another, e.g., the 'default default' for Haskell
-1.4 caused the otherwise unconstrained value <tt>1</tt> to be given
-the type <tt>Int</tt>, whereas Haskell 98 defaults it to
-<tt>Integer</tt>.  This may lead to differences in performance and
-behaviour, hence the usefulness of being non-silent about this.
-
-This warning is off by default.
-
-<tag>@-fwarn-missing-signatures@:</tag>
-<nidx>-fwarn-missing-signatures option</nidx>
-<nidx>type signatures, missing</nidx>
-
-If you would like GHC to check that every top-level function/value has
-a type signature, use the @-fwarn-missing-signatures@ option.  This
-option is off by default.
-
-</descrip>
-
-If you're feeling really paranoid, the @-dcore-lint@
-option<nidx>-dcore-lint option</nidx> is a good choice.  It turns on
-heavyweight intra-pass sanity-checking within GHC.  (It checks GHC's
-sanity, not yours.)
-
-%************************************************************************
-%*                                                                      *
-<sect1>Separate compilation
-<label id="separate-compilation">
-<p>
-<nidx>separate compilation</nidx>
-<nidx>recompilation checker</nidx>
-<nidx>make and recompilation</nidx>
-%*                                                                      *
-%************************************************************************
-
-This section describes how GHC supports separate compilation.
-
-<sect2>Interface files
-<label id="hi-files">
-<p>
-<nidx>interface files</nidx>
-<nidx>.hi files</nidx>
-
-When GHC compiles a source file @F@ which contains a module @A@, say,
-it generates an object @F.o@, <em>and</em> a companion <em>interface
-file</em> @A.hi@.  The interface file is not intended for human
-consumption, as you'll see if you take a look at one.  It's merely
-there to help the compiler compile other modules in the same program.
-
-NOTE: <em>The name of the interface file is derived from the name
-of the module, not from the name of the file containing the module</em>.
-This means that GHC knows what to look for when it sees <tt>import A</tt>
-in another module.  However, having the name of the interface file follow the module name and
-not the file name, means that working with tools such as @make(1)@
-become harder. @make@ implicitly assumes that any output files
-produced by processing a translation unit will have file names that
-can be derived from the file name of the translation unit.  For
-instance, pattern rules becomes unusable.  For this reason, we
-recommend you stick to using the same file name as the module name.
-
-The interface file for @A@ contains information needed by the compiler
-when it compiles any module @B@ that imports @A@, whether directly or
-indirectly.  When compiling @B@, GHC will read @A.hi@ to find the
-details that it needs to know about things defined in @A@.
-
-Furthermore, when compiling module @C@ which imports @B@, GHC may
-decide that it needs to know something about @A@ --- for example, @B@
-might export a function that involves a type defined in @A@.  In this
-case, GHC will go and read @A.hi@ even though @C@ does not explicitly
-import @A@ at all.
-
-The interface file may contain all sorts of things that aren't
-explicitly exported from @A@ by the programmer.  For example, even
-though a data type is exported abstractly, @A.hi@ will contain the
-full data type definition.  For small function definitions, @A.hi@
-will contain the complete definition of the function.  For bigger
-functions, @A.hi@ will contain strictness information about the
-function.  And so on.  GHC puts much more information into @.hi@ files
-when optimisation is turned on with the @-O@ flag.  Without @-O@ it
-puts in just the minimum; with @-O@ it lobs in a whole pile of stuff.
-<nidx>optimsation, effect on .hi files</nidx>
-
-@A.hi@ should really be thought of as a compiler-readable version of
-@A.o@.  If you use a @.hi@ file that wasn't generated by the same
-compilation run that generates the @.o@ file the compiler may assume
-all sorts of incorrect things about @A@, resulting in core dumps and
-other unpleasant happenings.
-
-%************************************************************************
-%*                                                                      *
-<sect2>File names and module names
-<label id="files-and-modules">
-<p>
-%*                                                                      *
-%************************************************************************
-
-Typically, a module @Foo@ will be contained in a file called @Foo.hs@
-or @Foo.lhs@.  But GHC does not require that to be the case.  You can put a module
-named @Foo@ in a file named @SomethingElse@.  In this case, <em>GHC will still
-write an interface file @Foo.hi@</em>, but it will write an object fild
-@SomethingElse.o@.  Any module that imports @Foo@ will
-of course look for @Foo.hi@, and it will find it.
-
-A useful consequence is that you can have many files, @A.hs@, @B.hs@, etc, containing
-the module @Main@.  This is useful if you want to build distinct programs
-in the same directory.
-
-
-%************************************************************************
-%*                                                                      *
-<sect2>Finding interface files
-<label id="options-finding-imports">
-<p>
-<nidx>interface files, finding them</nidx>
-<nidx>finding interface files</nidx>
-%*                                                                      *
-%************************************************************************
-
-In your program, you import a module @Foo@ by saying
-@import Foo@.  GHC goes looking for an interface file, @Foo.hi@.
-It has a builtin list of directories (notably including @.@) where
-it looks.
-
-<descrip>
-
-<tag>@-i<dirs>@</tag><nidx>-i&lt;dirs&gt; option</nidx> This flag
-prepends a colon-separated list of @dirs@ to the ``import
-directories'' list.
-See also Section <ref id="recomp"> for the significance of using
-relative and absolute pathnames in the @-i@ list.
-
-<tag>@-i@</tag> resets the ``import directories'' list back to nothing.
-
-<tag>@-fno-implicit-prelude@</tag>
-<nidx>-fno-implicit-prelude option</nidx>
-GHC normally imports @Prelude.hi@ files for you.  If you'd rather it
-didn't, then give it a @-fno-implicit-prelude@ option.  You are
-unlikely to get very far without a Prelude, but, hey, it's a free
-country.
-
-<tag>@-syslib <lib>@</tag>
-<nidx>-syslib &lt;lib&gt; option</nidx>
-
-If you are using a system-supplied non-Prelude library (e.g., the
-POSIX library), just use a @-syslib posix@ option (for example).  The
-right interface files should then be available.  Section <ref
-name="The GHC Prelude and Libraries" id="ghc-prelude"> lists the
-libraries available by this mechanism.
-
-<tag>@-I<dir>@</tag>
-<nidx>-I&lt;dir&gt; option</nidx>
-
-Once a Haskell module has been compiled to C (@.hc@ file), you may
-wish to specify where GHC tells the C compiler to look for @.h@ files.
-(Or, if you are using the @-cpp@ option<nidx>-cpp option</nidx>, where
-it tells the C pre-processor to look...)  For this purpose, use a @-I@
-option in the usual C-ish way.
-
-</descrip>
-
-%************************************************************************
-%*                                                                      *
-<sect2>Other options related to interface files
-<label id="hi-options">
-<p>
-<nidx>interface files, options</nidx>
-%*                                                                      *
-%************************************************************************
-
-GHC supports some other more exotic command-line options related to interface files.
-Most programmers should never need to use any of them.
-
-<descrip>
-
-<tag>@-ohi@ <filename></tag> 
-<nidx>-ohi &lt;file&gt; option</nidx> 
-
-The interface output may be directed to another file
-@bar2/Wurble.iface@ with the option @-ohi bar2/Wurble.iface@
-(not recommended).
-
-<tag>@-nohi@</tag>
-<nidx>-nohi option</nidx>
-
-Don't generate an interface file at all.
-
-<tag>@-hi-diffs@, @-hi-diffs-with-usages@, @-keep-hi-diffs@</tag>
-<nidx>-hi-diffs option</nidx> 
-<nidx>-hi-diffs-with-usages option</nidx> 
-<nidx>-keep-hi-diffs option</nidx> 
-The compiler does not overwrite an existing @.hi@ interface file if
-the new one is byte-for-byte the same as the old one; this is friendly
-to @make@.  When an interface does change, it is often enlightening to
-be informed.  The @-hi-diffs@ option will
-make @ghc@ run @diff@ on the old and new @.hi@ files. You can also
-record the difference in the interface file itself, the
-@-keep-hi-diffs@<nidx>-keep-hi-diffs</nidx> option takes care of that.
-
-The @.hi@ files from GHC contain ``usage'' information which changes
-often and uninterestingly.  If you really want to see these changes
-reported, you need to use the
-@-hi-diffs-with-usages@<nidx>-hi-diffs-with-usages option</nidx>
-option.
-
-<tag>@-fignore-interface-pragmas@</tag>
-<nidx>-fignore-interface-pragmas option</nidx>
-
-Interface files are normally jammed full of compiler-produced
-<em>pragmas</em>, which record arities, strictness info, etc.  If you
-think these pragmas are messing you up (or you are doing some kind of
-weird experiment), you can tell GHC to ignore them with the
-@-fignore-interface-pragmas@ option.
-
-<tag>@-fno-prune-tydecls@</tag>
-<nidx>-fno-prune-tydecls option</nidx>
-When compiling without optimisations on, the compiler is extra-careful
-about not slurping in data constructors that it will not need. 
-The @-fno-prune-tydecls@ flag lets you turn this cleverness off; the reason
-is to allow us to measure the effect of the cleverness.   (In earlier versions
-of GHC there was a bug that meant you <em>had</em> to turn it off sometimes,
-but that is no longer true.)
-</descrip>
-
-See also Section <ref name="Linking and consistency-checking"
-id="options-linker">, which describes how the linker finds standard
-Haskell libraries.
-
-%************************************************************************
-%*                                                                      *
-<sect2>The recompilation checker
-<label id="recomp">
-<p>
-<nidx>recompilation checker</nidx>
-%*                                                                      *
-%************************************************************************
-
-In the olden days, GHC compared the newly-generated @.hi@ file with
-the previous version; if they were identical, it left the old one
-alone and didn't change its modification date.  In consequence,
-importers of a module with an unchanged output @.hi@ file were not
-recompiled.
-
-This doesn't work any more.  In our earlier example, module @C@ does
-not import module @A@ directly, yet changes to @A.hi@ should force a
-recompilation of @C@.  And some changes to @A@ (changing the
-definition of a function that appears in an inlining of a function
-exported by @B@, say) may conceivably not change @B.hi@ one jot.  So
-now...
-
-GHC keeps a version number on each interface file, and on each type
-signature within the interface file.  It also keeps in every interface
-file a list of the version numbers of everything it used when it last
-compiled the file.  If the source file's modification date is earlier
-than the @.o@ file's date (i.e. the source hasn't changed since the
-file was last compiled), GHC will be clever.  It compares the version
-numbers on the things it needs this time with the version numbers on
-the things it needed last time (gleaned from the interface file of the
-module being compiled); if they are all the same it stops compiling
-rather early in the process saying ``Compilation IS NOT required''.
-What a beautiful sight!
-
-GHC <em>only</em> keeps detailed dependency information for ``user'' modules,
-not for ``library'' modules.  It distinguishes the two by a hack: a module
-whose @.hi@ file has an absolute path name is considered a library module,
-while a relative path name indicates a user module.  So if you have a 
-multi-directory application, use <em>relative</em> path names in your
-@-i@ path, to force GHC to record detailed dependency information.
-Use absolute path names only for directories containing slowly-changing
-library modules.
-
-A path is considered ``absolute'' if it starts with ``@/@'', or
-``@A:/@'', or ``@A:\@'' (or ``@B:/@'', ``@B:\@'' etc).
-
-Patrick Sansom had a workshop paper about how all this is done (though
-the details have changed quite a bit).  Ask
-him (email: <htmlurl name="sansom@@dcs.gla.ac.uk"
-url="mailto:sansom@@dcs.gla.ac.uk">) if you want a copy.
-
-%************************************************************************
-%*                                                                      *
-<sect2>Using @make@
-<label id="using-make">
-<p>
-<ncdx>make</ncdx>
-%*                                                                      *
-%************************************************************************
-
-It is reasonably straightforward to set up a @Makefile@ to use with
-GHC, assuming you name your source files the same as your modules.
-Thus:
-
-<tscreen><verb>
-HC      = ghc
-HC_OPTS = -cpp $(EXTRA_HC_OPTS)
-
-SRCS = Main.lhs Foo.lhs Bar.lhs
-OBJS = Main.o   Foo.o   Bar.o
-
-.SUFFIXES : .o .hi .lhs .hc .s
-
-cool_pgm : $(OBJS)
-        rm $@
-        $(HC) -o $@ $(HC_OPTS) $(OBJS)
-
-# Standard suffix rules
-.o.hi:
-	@:
-
-.lhs.o:
-        $(HC) -c $< $(HC_OPTS)
-
-.hs.o:
-        $(HC) -c $< $(HC_OPTS)
-
-# Inter-module dependencies
-Foo.o Foo.hc Foo.s    : Baz.hi		# Foo imports Baz
-Main.o Main.hc Main.s : Foo.hi Baz.hi	# Main imports Foo and Baz
-</verb></tscreen>
-
-(Sophisticated @make@ variants may achieve some of the above more
-elegantly.  Notably, @gmake@'s pattern rules let you write the more
-comprehensible:
-
-<tscreen><verb>
-%.o : %.lhs
-        $(HC) -c $< $(HC_OPTS)
-</verb></tscreen>
-
-What we've shown should work with any @make@.)
-
-Note the cheesy @.o.hi@ rule: It records the dependency of the
-interface (@.hi@) file on the source.  The rule says a @.hi@ file can
-be made from a @.o@ file by doing... nothing.  Which is true.
-
-Note the inter-module dependencies at the end of the Makefile, which
-take the form
-
-<tscreen><verb>
-Foo.o Foo.hc Foo.s    : Baz.hi		# Foo imports Baz
-</verb></tscreen>
-
-They tell @make@ that if any of @Foo.o@, @Foo.hc@ or @Foo.s@ have an
-earlier modification date than @Baz.hi@, then the out-of-date file
-must be brought up to date.  To bring it up to date, @make@ looks for
-a rule to do so; one of the preceding suffix rules does the job
-nicely.
-
-Putting inter-dependencies of the form @Foo.o : Bar.hi@ into your
-@Makefile@ by hand is rather error-prone.  Don't worry---never fear,
-@mkdependHS@ is here! (and is distributed as part of GHC) Add the
-following to your @Makefile@:
-
-<tscreen><verb>
-depend :
-        mkdependHS -- $(HC_OPTS) -- $(SRCS)
-</verb></tscreen>
-
-Now, before you start compiling, and any time you change the @imports@
-in your program, do @make depend@ before you do @make cool_pgm@.
-@mkdependHS@ will append the needed dependencies to your @Makefile@.
-@mkdependHS@ is fully describe in Section <ref name="Makefile
-dependencies in Haskell: using mkdependHS" id="mkdependHS">.
-
-A few caveats about this simple scheme:
-
-<itemize>
-
-<item> You may need to compile some modules explicitly to create their
-interfaces in the first place (e.g., @make Bar.o@ to create @Bar.hi@).
-
-<item> You may have to type @make@ more than once for the dependencies
-to have full effect.  However, a @make@ run that does nothing
-<em>does</em> mean ``everything's up-to-date.''
-
-<item> This scheme will work with mutually-recursive modules but,
-again, it may take multiple iterations to ``settle.''
-
-</itemize>
-
-%************************************************************************
-%*                                                                      *
-<sect2>How to compile mutually recursive modules
-<label id="mutual-recursion">
-<p>
-<nidx>module system, recursion</nidx>
-<nidx>recursion, between modules</nidx>
-%*                                                                      *
-%************************************************************************
-
-Currently, the compiler does not have proper support for dealing with
-mutually recursive modules:
-
-<tscreen><verb>
-module A where
-
-import B
-
-newtype TA = MkTA Int
-
-f :: TB -> TA
-f (MkTB x) = MkTA x
---------
-module B where
-
-import A
-
-data TB = MkTB !Int
-
-g :: TA -> TB
-g (MkTA x) = MkTB x
-</verb></tscreen>
-
-When compiling either module A and B, the compiler will try (in vain)
-to look for the interface file of the other. So, to get mutually
-recursive modules off the ground, you need to hand write an interface
-file for A or B, so as to break the loop.  These hand-written
-interface files are called @hi-boot@ files, and are placed in a file
-called @<module>.hi-boot@.  To import from an @hi-boot@ file instead
-of the standard @.hi@ file, use the following syntax in the importing module:
-<nidx>hi-boot files</nidx>
-<nidx>importing, hi-boot files</nidx>
-
-<tscreen> <verb>
-import {-# SOURCE #-} A
-</verb> </tscreen>
-
-The hand-written interface need only contain the bare minimum of
-information needed to get the bootstrapping process started.  For
-example, it doesn't need to contain declarations for <em/everything/
-that module @A@ exports, only the things required by the module that
-imports @A@ recursively.
-
-For the example at hand, the boot interface file for A would look like
-the following:
-
-<tscreen><verb>
-__interface A 1 404 where
-__export A TA{MkTA} ;
-1 newtype TA = MkTA PrelBase.Int ;
-</verb></tscreen>
-
-The syntax is essentially the same as a normal @.hi@ file
-(unfortunately), but you can usually tailor an existing @.hi@ file to
-make a @.hi-boot@ file.
-
-Notice that we only put the declaration for the newtype @TA@ in the
-@hi-boot@ file, not the signature for @f@, since @f@ isn't used by
-@B@.
-
-The number ``1'' after ``__interface A'' gives the version number of module A;
-it is incremented whenever anything in A's interface file changes.  The ``404'' is
-the version number of the interface file <em>syntax</em>; we change it when
-we change the syntax of interface files so that you get a better error message when
-you try to read an old-format file with a new-format compiler.
-
-The number ``1'' at the beginning of a declaration is the <em>version
-number</em> of that declaration: for the purposes of @.hi-boot@ files
-these can all be set to 1.  All names must be fully qualified with the
-<em/original/ module that an object comes from: for example, the
-reference to @Int@ in the interface for @A@ comes from @PrelBase@,
-which is a module internal to GHC's prelude.  It's a pain, but that's
-the way it is.
-
-If you want an hi-boot file to export a data type, but you don't want to give its constructors
-(because the constructors aren't used by the SOURCE-importing module), you can write simply:
-
-<tscreen><verb>
-__interface A 1 404 where
-__export A TA;
-1 data TA
-</verb></tscreen>
-
-(You must write all the type parameters, but leave out the '=' and everything that follows it.)
-
-<bf>Note:</bf> This is all a temporary solution, a version of the
-compiler that handles mutually recursive properly without the manual
-construction of interface files, is (allegedly) in the works.
-
-%************************************************************************
-%*                                                                      *
-<sect1>Command line options in source files
-<label id="source-file-options">
-<p>
-<nidx>source-file options</nidx>
-%*                                                                      *
-%************************************************************************
-
-GHC expects its flags on the command line, but it is also possible
-to embed them in the Haskell module itself, using the  @OPTIONS@
-pragma <nidx>OPTIONS pragma</nidx>: 
-<tscreen><verb>
-  {-# OPTIONS -fglasgow-exts -fno-cpr-analyse #-}
-  module X where
-  
-  ...
-</verb></tscreen>
-@OPTIONS@ pragmas are only looked for at the top of your source
-files, upto the first (non-literate,non-empty) line not containing
-@OPTIONS@. Multiple @OPTIONS@ pragmas are recognised. Note
-that your command shell does not get to the source file options, they
-are just included literally in the array of command-line arguments
-the compiler driver maintains internally, so you'll be desperately
-disappointed if you try to @glob@ etc. inside @OPTIONS@.
-
-The contents of @OPTIONS@ are prepended to the command-line
-options, so you *do* have the ability to override @OPTIONS@ settings
-via the command line.
-
-It is not recommended to move all the contents of your Makefiles into
-your source files, but in some circumstances, the @OPTIONS@ pragma
-is the Right Thing. (If you use @-keep-hc-file-too@ and have @OPTIONS@
-flags in your module, the @OPTIONS@ will get put into the generated .hc
-file).
-
-
-%************************************************************************
-%*                                                                      *
-<sect1>Optimisation (code improvement)
-<label id="options-optimise">
-<p>
-<nidx>optimisation (GHC)</nidx>
-<nidx>improvement, code (GHC)</nidx>
-%*                                                                      *
-%************************************************************************
-
-The @-O*@ options specify convenient ``packages'' of optimisation
-flags; the @-f*@ options described later on specify
-<em>individual</em> optimisations to be turned on/off; the @-m*@
-options specify <em>machine-specific</em> optimisations to be turned
-on/off.
-
-%----------------------------------------------------------------------
-<sect2>@-O*@: convenient ``packages'' of optimisation flags.
-<label id="optimise-pkgs">
-<p>
-<nidx>-O options</nidx>
-
-There are <em>many</em> options that affect the quality of code
-produced by GHC.  Most people only have a general goal, something like
-``Compile quickly'' or ``Make my program run like greased lightning.''
-The following ``packages'' of optimisations (or lack thereof) should
-suffice.
-
-Once you choose a @-O*@ ``package,'' stick with it---don't chop and
-change.  Modules' interfaces <em>will</em> change with a shift to a new
-@-O*@ option, and you may have to recompile a large chunk of all
-importing modules before your program can again be run
-safely (see Section <ref name="The recompilation checker" id="recomp">).
-
-<descrip>
-<tag>No @-O*@-type option specified:</tag>
-<nidx>-O* not specified</nidx>
-This is taken to mean: ``Please compile quickly; I'm not over-bothered
-about compiled-code quality.''  So, for example: @ghc -c Foo.hs@
-
-<tag>@-O@ or @-O1@:</tag>
-<nidx>-O option</nidx>
-<nidx>-O1 option</nidx>
-<nidx>optimise normally</nidx>
-Means: ``Generate good-quality code without taking too long about it.''
-Thus, for example: @ghc -c -O Main.lhs@
-
-<tag>@-O2@:</tag>
-<nidx>-O2 option</nidx>
-<nidx>optimise aggressively</nidx>
-Means: ``Apply every non-dangerous optimisation, even if it means
-significantly longer compile times.''
-
-The avoided ``dangerous'' optimisations are those that can make
-runtime or space <em>worse</em> if you're unlucky.  They are
-normally turned on or off individually.
-
-At the moment, @-O2@ is <em>unlikely</em> to produce
-better code than @-O@.
-
-<tag>@-O2-for-C@:</tag>
-<nidx>-O2-for-C option</nidx>
-<nidx>gcc, invoking with -O2</nidx>
-
-Says to run GCC with @-O2@, which may be worth a few percent in
-execution speed.  Don't forget @-fvia-C@, lest you use the native-code
-generator and bypass GCC altogether!
-
-<tag>@-Onot@:</tag>
-<nidx>-Onot option</nidx>
-<nidx>optimising, reset</nidx>
-
-This option will make GHC ``forget'' any @-O@ish options it has seen so
-far.  Sometimes useful; for example: @make all EXTRA_HC_OPTS=-Onot@.
-
-<tag>@-Ofile <file>@:</tag>
-<nidx>-Ofile &lt;file&gt; option</nidx>
-<nidx>optimising, customised</nidx>
-
-For those who need <em>absolute</em> control over <em>exactly</em>
-what options are used (e.g., compiler writers, sometimes :-), a list
-of options can be put in a file and then slurped in with @-Ofile@.
-
-In that file, comments are of the @#@-to-end-of-line variety; blank
-lines and most whitespace is ignored.
-
-Please ask if you are baffled and would like an example of @-Ofile@!
-</descrip>
-
-At Glasgow, we don't use a @-O*@ flag for day-to-day work.  We use
-@-O@ to get respectable speed; e.g., when we want to measure
-something.  When we want to go for broke, we tend to use @-O -fvia-C
--O2-for-C@ (and we go for lots of coffee breaks).
-
-The easiest way to see what @-O@ (etc.) ``really mean'' is to run with
-@-v@, then stand back in amazement.  Alternatively, just look at the
-@HsC_minus<blah>@ lists in the @ghc@ driver script.
-
-%----------------------------------------------------------------------
-<sect2>@-f*@: platform-independent flags
-<p>
-<nidx>-f* options (GHC)</nidx>
-<nidx>-fno-* options (GHC)</nidx>
-
-Flags can be turned <em>off</em> individually.  (NB: I hope you have a
-good reason for doing this....) To turn off the @-ffoo@ flag, just use
-the @-fno-foo@ flag.<nidx>-fno-&lt;opt&gt; anti-option</nidx> So, for
-example, you can say @-O2 -fno-strictness@, which will then drop out
-any running of the strictness analyser.
-
-The options you are most likely to want to turn off are:
-<itemize>
-<item>
-@-fno-strictness@<nidx>-fno-strictness option</nidx> (strictness
-analyser, because it is sometimes slow),
-<item>
-@-fno-specialise@<nidx>-fno-specialise option</nidx> (automatic
-specialisation of overloaded functions, because it can make your code
-bigger) (US spelling also accepted), and
-<item>
-@-fno-cpr-analyse@<nidx>-fno-cpr-analyse option</nidx> switches off the CPR (constructed product
-result) analyser.
-</itemize>
-
-Should you wish to turn individual flags <em>on</em>, you are advised
-to use the @-Ofile@ option, described above.  Because the order in
-which optimisation passes are run is sometimes crucial, it's quite
-hard to do with command-line options.
-
-Here are some ``dangerous'' optimisations you <em>might</em> want to try:
-<descrip>
-%------------------------------------------------------------------
-<tag>@-fvia-C@:</tag>
-<nidx>-fvia-C option</nidx>
-<nidx>native code generator, turning off</nidx>
-
-Compile via C, and don't use the native-code generator.  (There are
-many cases when GHC does this on its own.)  You might pick up a little
-bit of speed by compiling via C.  If you use @_ccall_gc_@s or
-@_casm_@s, you probably <em>have to</em> use @-fvia-C@.
-
-The lower-case incantation, @-fvia-c@, is synonymous.
-
-Compiling via C will probably be slower (in compilation time) than
-using GHC's native code generator.
-
-<tag>@-funfolding-interface-threshold<n>@:</tag>
-<nidx>-funfolding-interface-threshold option</nidx>
-<nidx>inlining, controlling</nidx>
-<nidx>unfolding, controlling</nidx>
-(Default: 30) By raising or lowering this number, you can raise or
-lower the amount of pragmatic junk that gets spewed into interface
-files.  (An unfolding has a ``size'' that reflects the cost in terms
-of ``code bloat'' of expanding that unfolding in another module.  A
-bigger function would be assigned a bigger cost.)
-
-<tag>@-funfolding-creation-threshold<n>@:</tag>
-<nidx>-funfolding-creation-threshold option</nidx>
-<nidx>inlining, controlling</nidx>
-<nidx>unfolding, controlling</nidx>
-(Default: 30) This option is similar to
-@-funfolding-interface-threshold@, except that it governs unfoldings
-within a single module.  Increasing this figure is more likely to
-result in longer compile times than faster code.  The next option is
-more useful:
-
-<tag>@-funfolding-use-threshold<n>@:</tag>
-<nidx>-funfolding-use-threshold option</nidx>
-<nidx>inlining, controlling</nidx>
-<nidx>unfolding, controlling</nidx>
-(Default: 8) This is the magic cut-off figure for unfolding: below
-this size, a function definition will be unfolded at the call-site,
-any bigger and it won't.  The size computed for a function depends on
-two things: the actual size of the expression minus any discounts that
-apply (see @-funfolding-con-discount@).
-
-<tag>@-funfolding-con-discount<n>@:</tag>
-<nidx>-funfolding-con-discount option</nidx>
-<nidx>inlining, controlling</nidx>
-<nidx>unfolding, controlling</nidx>
-(Default: 2) If the compiler decides that it can eliminate some
-computation by performing an unfolding, then this is a discount factor
-that it applies to the funciton size before deciding whether to unfold
-it or not.
-
-OK, folks, these magic numbers `30', `8', and '2' are mildly
-arbitrary; they are of the ``seem to be OK'' variety.  The `8' is the
-more critical one; it's what determines how eager GHC is about
-expanding unfoldings.
-
-<tag>@-funbox-strict-fields@:</tag>
-<nidx>-funbox-strict-fields option</nidx>
-<nidx>strict constructor fields</nidx>
-<nidx>constructor fields, strict</nidx>
-
-This option causes all constructor fields which are marked strict
-(i.e. ``!'') to be unboxed or unpacked if possible.  For example:
-
-<tscreen><verb>
-data T = T !Float !Float
-</verb></tscreen>
-
-will create a constructor @T@ containing two unboxed floats if the
-@-funbox-strict-fields@ flag is given.  This may not always be an
-optimisation: if the @T@ constructor is scrutinised and the floats
-passed to a non-strict function for example, they will have to be
-reboxed (this is done automatically by the compiler).
-
-This option should only be used in conjunction with @-O@, in order to
-expose unfoldings to the compiler so the reboxing can be removed as
-often as possible.  For example:
-
-<tscreen><verb>
-f :: T -> Float
-f (T f1 f2) = f1 + f2
-</verb></tscreen>
-
-The compiler will avoid reboxing @f1@ and @f2@ by inlining @+@ on
-floats, but only when @-O@ is on.
-
-Any single-constructor data is eligible for unpacking; for example
-
-<tscreen><verb>
-data T = T !(Int,Int)
-</verb></tscreen>
-
-will store the two @Int@s directly in the @T@ constructor, by flattening
-the pair.  Multi-level unpacking is also supported:
-
-<tscreen><verb>
-data T = T !S
-data S = S !Int !Int
-</verb></tscreen>
-
-will store two unboxed @Int#@s directly in the @T@ constructor.
-
-<tag>@-fsemi-tagging@:</tag>
-This option (which <em>does not work</em> with the native-code generator)
-tells the compiler to add extra code to test for already-evaluated
-values.  You win if you have lots of such values during a run of your
-program, you lose otherwise.  (And you pay in extra code space.)
-
-We have not played with @-fsemi-tagging@ enough to recommend it.
-(For all we know, it doesn't even work anymore...  Sigh.)
-</descrip>
-
-%----------------------------------------------------------------------
-<sect2>@-m*@: platform-specific flags
-<p>
-<nidx>-m* options (GHC)</nidx>
-<nidx>platform-specific options</nidx>
-<nidx>machine-specific options</nidx>
-
-Some flags only make sense for particular target platforms.
-
-<descrip>
-<tag>@-mv8@:</tag>
-(SPARC machines)<nidx>-mv8 option (SPARC only)</nidx>
-Means to pass the like-named option to GCC; it says to use the
-Version 8 SPARC instructions, notably integer multiply and divide.
-The similiar @-m*@ GCC options for SPARC also work, actually.
-
-<tag>@-mlong-calls@:</tag>
-(HPPA machines)<nidx>-mlong-calls option (HPPA only)</nidx>
-Means to pass the like-named option to GCC.  Required for Very Big
-modules, maybe.  (Probably means you're in trouble...)
-
-<tag>@-monly-[32]-regs@:</tag>
-(iX86 machines)<nidx>-monly-N-regs option (iX86 only)</nidx>
-GHC tries to ``steal'' four registers from GCC, for performance
-reasons; it almost always works.  However, when GCC is compiling some
-modules with four stolen registers, it will crash, probably saying:
-<tscreen><verb>
-Foo.hc:533: fixed or forbidden register was spilled.
-This may be due to a compiler bug or to impossible asm
-statements or clauses.
-</verb></tscreen>
-Just give some registers back with @-monly-N-regs@.  Try `3' first,
-then `2'.  If `2' doesn't work, please report the bug to us.
-</descrip>
-
-%----------------------------------------------------------------------
-<sect2>Code improvement by the C compiler.
-<label id="optimise-C-compiler">
-<p>
-<nidx>optimisation by GCC</nidx>
-<nidx>GCC optimisation</nidx>
-
-The C~compiler (GCC) is run with @-O@ turned on.  (It has
-to be, actually).
-
-If you want to run GCC with @-O2@---which may be worth a few
-percent in execution speed---you can give a
-@-O2-for-C@<nidx>-O2-for-C option</nidx> option.
-
-%************************************************************************
-%*                                                                      *
-<sect1>Options related to a particular phase
-<label id="options-phases">
-<p>
-%*                                                                      *
-%************************************************************************
-
-<sect2> The C pre-processor
-<label id="c-pre-processor">
-<p>
-<nidx>pre-processing: cpp</nidx>
-<nidx>C pre-processor options</nidx>
-<nidx>cpp, pre-processing with</nidx>
-
-The C pre-processor @cpp@ is run over your Haskell code only if the
-@-cpp@ option <nidx>-cpp option</nidx> is given.  Unless you are
-building a large system with significant doses of conditional
-compilation, you really shouldn't need it.
-<descrip>
-<tag>@-D<foo>@:</tag>
-<nidx>-D&lt;name&gt; option</nidx>
-Define macro @<foo>@ in the usual way.  NB: does <em>not</em> affect
-@-D@ macros passed to the C~compiler when compiling via C!  For those,
-use the @-optc-Dfoo@ hack... (see Section <ref name="Forcing options
-to a particular phase." id="forcing-options-through">).
-
-<tag>@-U<foo>@:</tag>
-<nidx>-U&lt;name&gt; option</nidx>
-Undefine macro @<foo>@ in the usual way.
-
-<tag>@-I<dir>@:</tag>
-<nidx>-I&lt;dir&gt; option</nidx>
-Specify a directory in which to look for @#include@ files, in
-the usual C way.
-</descrip>
-
-The @ghc@ driver pre-defines several macros when processing Haskell
-source code (@.hs@ or @.lhs@ files):
-
-<descrip>
-<tag>@__HASKELL98__@:</tag>
-<nidx>__HASKELL98__</nidx>
-If defined, this means that GHC supports the language defined by the
-Haskell 98 report.
-
-<tag>@__HASKELL__=98@:</tag>
-<nidx>__HASKELL__</nidx>
-In GHC 4.04 and later, the @__HASKELL__@ macro is defined as having
-the value @98@.
-
-<tag>@__HASKELL1__@:</tag>
-<nidx>__HASKELL1__ macro</nidx>
-If defined to <em/n/, that means GHC supports the Haskell language
-defined in the Haskell report version <em/1.n/.  Currently 5.  This
-macro is deprecated, and will probably disappear in future versions.
-
-<tag>@__GLASGOW_HASKELL__@:</tag>
-<nidx>__GLASGOW_HASKELL__ macro</nidx>
-For version <em/n/ of the GHC system, this will be @#define@d to
-<em/100n/.  So, for version 4.00, it is 400.
-
-With any luck, @__GLASGOW_HASKELL__@ will be undefined in all other
-implementations that support C-style pre-processing.
-
-(For reference: the comparable symbols for other systems are:
-@__HUGS__@ for Hugs and @__HBC__@ for Chalmers.)
-
-NB. This macro is set when pre-processing both Haskell source and C
-source, including the C source generated from a Haskell module
-(ie. @.hs@, @.lhs@, @.c@ and @.hc@ files).
-
-<tag>@__CONCURRENT_HASKELL__@:</tag>
-<nidx>__CONCURRENT_HASKELL__ macro</nidx>
-This symbol is defined when pre-processing Haskell (input) and
-pre-processing C (GHC output).  Since GHC from verion 4.00 now
-supports concurrent haskell by default, this symbol is always defined.
-
-<tag>@__PARALLEL_HASKELL__@:</tag>
-<nidx>__PARALLEL_HASKELL__ macro</nidx>
-Only defined when @-parallel@ is in use!  This symbol is defined when
-pre-processing Haskell (input) and pre-processing C (GHC output).
-</descrip>
-
-Options other than the above can be forced through to the C
-pre-processor with the @-opt@ flags (see
-Section <ref name="Forcing options to a particular phase." id="forcing-options-through">).
-
-A small word of warning: @-cpp@ is not friendly to ``string
-gaps''.<nidx>-cpp vs string gaps</nidx><nidx>string gaps vs
--cpp</nidx>.  In other words, strings such as the following:
-
-<tscreen><verb>
-	strmod = "\
-	\ p \
-	\ "
-</verb></tscreen>
-
-don't work with @-cpp@; @/usr/bin/cpp@ elides the
-backslash-newline pairs.
-
-However, it appears that if you add a space at the end of the line,
-then @cpp@ (at least GNU @cpp@ and possibly other @cpp@s)
-leaves the backslash-space pairs alone and the string gap works as
-expected.
-
-%************************************************************************
-%*                                                                      *
-<sect2>Options affecting the C compiler (if applicable)
-<label id="options-C-compiler">
-<p>
-<nidx>include-file options</nidx>
-<nidx>C compiler options</nidx>
-<nidx>GCC options</nidx>
-%*                                                                      *
-%************************************************************************
-
-At the moment, quite a few common C-compiler options are passed on
-quietly to the C compilation of Haskell-compiler-generated C files.
-THIS MAY CHANGE.  Meanwhile, options so sent are:
-
-<tabular ca="ll">
-@-ansi@      | do ANSI C (not K&amp;R) @@
-@-pedantic@  | be so@@
-@-dgcc-lint@ | (hack) short for ``make GCC very paranoid''@@
-</tabular>
-<nidx>-ansi option (for GCC)</nidx>
-<nidx>-pedantic option (for GCC)</nidx>
-<nidx>-dgcc-lint option (GCC paranoia)</nidx>
-
-If you are compiling with lots of @ccalls@, etc., you may need to
-tell the C~compiler about some @#include@ files.  There is no real
-pretty way to do this, but you can use this hack from the
-command-line:
-
-<tscreen><verb>
-% ghc -c '-#include <X/Xlib.h>' Xstuff.lhs
-</verb></tscreen>
-
-
-%************************************************************************
-%*                                                                      *
-<sect2>Linking and consistency-checking
-<label id="options-linker">
-<p>
-<nidx>linker options</nidx>
-<nidx>ld options</nidx>
-%*                                                                      *
-%************************************************************************
-
-GHC has to link your code with various libraries, possibly including:
-user-supplied, GHC-supplied, and system-supplied (@-lm@ math
-library, for example).
-
-<descrip>
-<tag>@-l<FOO>@:</tag>
-<nidx>-l&lt;lib&gt; option</nidx>
-Link in a library named @lib<FOO>.a@ which resides somewhere on the
-library directories path.
-
-Because of the sad state of most UNIX linkers, the order of such
-options does matter.  Thus: @ghc -lbar *.o@ is almost certainly
-wrong, because it will search @libbar.a@ <em>before</em> it has
-collected unresolved symbols from the @*.o@ files.
-@ghc *.o -lbar@ is probably better.
-
-The linker will of course be informed about some GHC-supplied
-libraries automatically; these are:
-
-<tabular ca="ll">
-<bf>-l equivalent</bf> | <bf>description</bf> @@
-@@
-@-lHSrts,-lHSclib@ | basic runtime libraries @@
-@-lHS@         | standard Prelude library @@
-@-lHS_cbits@  | C support code for standard Prelude library @@
-@-lgmp@        | GNU multi-precision library (for Integers)@@
-</tabular>
-
-<nidx>-lHS library</nidx>
-<nidx>-lHS_cbits library</nidx>
-<nidx>-lHSrts library</nidx>
-<nidx>-lgmp library</nidx>
-
-<tag>@-syslib <name>@:</tag>
-<nidx>-syslib &lt;name&gt; option</nidx>
-
-If you are using a Haskell ``system library'' (e.g., the POSIX
-library), just use the @-syslib posix@ option, and the correct code
-should be linked in.
-
-<tag>@-L<dir>@:</tag>
-<nidx>-L&lt;dir&gt; option</nidx>
-Where to find user-supplied libraries...  Prepend the directory
-@<dir>@ to the library directories path.
-
-<tag>@-static@:</tag>
-<nidx>-static option</nidx>
-Tell the linker to avoid shared libraries.
-
-<tag>@-no-link-chk@ and @-link-chk@:</tag>
-<nidx>-no-link-chk option</nidx>
-<nidx>-link-chk option</nidx>
-<nidx>consistency checking of executables</nidx>
-By default, immediately after linking an executable, GHC verifies that
-the pieces that went into it were compiled with compatible flags; a
-``consistency check''.
-(This is to avoid mysterious failures caused by non-meshing of
-incompatibly-compiled programs; e.g., if one @.o@ file was compiled
-for a parallel machine and the others weren't.)  You may turn off this
-check with @-no-link-chk@.  You can turn it (back) on with
-@-link-chk@ (the default).
-
-<tag><tt>-no-hs-main</tt>:</tag>
-<nidx>-no-hs-main option</nidx>
-<nidx>linking Haskell libraries with foreign code</nidx>
-
-In the event you want to include ghc-compiled code as part of another
-(non-Haskell) program, the RTS will not be supplying its definition of
-<tt/main()/ at link-time, you will have to. To signal that to the
-driver script when linking, use <tt/-no-hs-main/.
-
-Notice that since the command-line passed to the linker is rather
-involved, you probably want to use the ghc driver script to do the
-final link of your `mixed-language' application. This is not a
-requirement though, just try linking once with <tt/-v/ on to see what
-options the driver passes through to the linker.
-
-</descrip>
-
-%************************************************************************
-%*                                                                      *
-<sect1>Using Concurrent Haskell
-<p>
-<nidx>Concurrent Haskell---use</nidx>
-%*                                                                      *
-%************************************************************************
-
-GHC (as of version 4.00) supports Concurrent Haskell by default,
-without requiring a special option or libraries compiled in a certain
-way.  To get access to the support libraries for Concurrent Haskell
-(ie. @Concurrent@ and friends), use the @-syslib concurrent@ option.
-
-Three RTS options are provided for modifying the behaviour of the
-threaded runtime system.  See the descriptions of @-C[<us>]@, @-q@,
-and @-t<num>@ in Section <ref name="RTS options for
-Concurrent/Parallel Haskell" id="parallel-rts-opts">.
-
-Concurrent Haskell is described in more detail in Section <ref
-name="Concurrent and Parallel Haskell" id="concurrent-and-parallel">.
-
-%************************************************************************
-%*                                                                      *
-<sect1>Using Parallel Haskell
-<p>
-<nidx>Parallel Haskell---use</nidx>
-%*                                                                      *
-%************************************************************************
-
-[You won't be able to execute parallel Haskell programs unless PVM3
-(Parallel Virtual Machine, version 3) is installed at your site.]
-
-To compile a Haskell program for parallel execution under PVM, use the
-@-parallel@ option,<nidx>-parallel option</nidx> both when compiling
-<em>and linking</em>.  You will probably want to @import Parallel@
-into your Haskell modules.
-
-To run your parallel program, once PVM is going, just invoke it ``as
-normal''.  The main extra RTS option is @-N<n>@, to say how many
-PVM ``processors'' your program to run on.  (For more details of
-all relevant RTS options, please see Section <ref name="RTS options for Concurrent/Parallel Haskell" id="parallel-rts-opts">.)
-
-In truth, running Parallel Haskell programs and getting information
-out of them (e.g., parallelism profiles) is a battle with the vagaries of
-PVM, detailed in the following sections.
-
-%************************************************************************
-%*                                                                      *
-<sect2>Dummy's guide to using PVM
-<p>
-<nidx>PVM, how to use</nidx>
-<nidx>Parallel Haskell---PVM use</nidx>
-%*                                                                      *
-%************************************************************************
-
-Before you can run a parallel program under PVM, you must set the
-required environment variables (PVM's idea, not ours); something like,
-probably in your @.cshrc@ or equivalent:
-<tscreen><verb>
-setenv PVM_ROOT /wherever/you/put/it
-setenv PVM_ARCH `$PVM_ROOT/lib/pvmgetarch`
-setenv PVM_DPATH $PVM_ROOT/lib/pvmd
-</verb></tscreen>
-
-Creating and/or controlling your ``parallel machine'' is a purely-PVM
-business; nothing specific to Parallel Haskell.
-
-You use the @pvm@<nidx>pvm command</nidx> command to start PVM on your
-machine.  You can then do various things to control/monitor your
-``parallel machine;'' the most useful being:
-
-\begin{tabular}{ll}
-@Control-D@ & exit @pvm@, leaving it running \\
-@halt@ & kill off this ``parallel machine'' \& exit \\
-@add <host>@ & add @<host>@ as a processor \\
-@delete <host>@ & delete @<host>@ \\
-@reset@	& kill what's going, but leave PVM up \\
-@conf@       & list the current configuration \\
-@ps@         & report processes' status \\
-@pstat <pid>@ & status of a particular process \\
-\end{tabular}
-
-The PVM documentation can tell you much, much more about @pvm@!
-
-%************************************************************************
-%*                                                                      *
-<sect2>Parallelism profiles
-<p>
-<nidx>parallelism profiles</nidx>
-<nidx>profiles, parallelism</nidx>
-<nidx>visualisation tools</nidx>
-%*                                                                      *
-%************************************************************************
-
-With Parallel Haskell programs, we usually don't care about the
-results---only with ``how parallel'' it was!  We want pretty pictures.
-
-Parallelism profiles (\`a la @hbcpp@) can be generated with the
-@-q@<nidx>-q RTS option (concurrent, parallel)</nidx> RTS option.  The
-per-processor profiling info is dumped into files named
-@<full-path><program>.gr@.  These are then munged into a PostScript picture,
-which you can then display.  For example, to run your program
-@a.out@ on 8 processors, then view the parallelism profile, do:
-
-<tscreen><verb>
-% ./a.out +RTS -N8 -q
-% grs2gr *.???.gr > temp.gr	# combine the 8 .gr files into one
-% gr2ps -O temp.gr		# cvt to .ps; output in temp.ps
-% ghostview -seascape temp.ps	# look at it!
-</verb></tscreen>
-
-The scripts for processing the parallelism profiles are distributed
-in @ghc/utils/parallel/@.
-
-%************************************************************************
-%*                                                                      *
-<sect2>Other useful info about running parallel programs
-<p>
-%*                                                                      *
-%************************************************************************
-
-The ``garbage-collection statistics'' RTS options can be useful for
-seeing what parallel programs are doing.  If you do either
-@+RTS -Sstderr@<nidx>-Sstderr RTS option</nidx> or @+RTS -sstderr@, then
-you'll get mutator, garbage-collection, etc., times on standard
-error. The standard error of all PE's other than the `main thread'
-appears in @/tmp/pvml.nnn@, courtesy of PVM.
-
-Whether doing @+RTS -Sstderr@ or not, a handy way to watch
-what's happening overall is: @tail -f /tmp/pvml.nnn@.
-
-%************************************************************************
-%*                                                                      *
-<sect2>RTS options for Concurrent/Parallel Haskell
-<label id="parallel-rts-opts">
-<p>
-<nidx>RTS options, concurrent</nidx>
-<nidx>RTS options, parallel</nidx>
-<nidx>Concurrent Haskell---RTS options</nidx>
-<nidx>Parallel Haskell---RTS options</nidx>
-%*                                                                      *
-%************************************************************************
-
-Besides the usual runtime system (RTS) options
-(Section <ref name="Running a compiled program" id="runtime-control">), there are a few options particularly
-for concurrent/parallel execution.
-
-<descrip>
-<tag>@-N<N>@:</tag>
-<nidx>-N&lt;N&gt; RTS option (parallel)</nidx>
-(PARALLEL ONLY) Use @<N>@ PVM processors to run this program;
-the default is 2.
-
-<tag>@-C[<us>]@:</tag>
-<nidx>-C&lt;us&gt; RTS option</nidx>
-Sets the context switch interval to @<us>@ microseconds.  A context
-switch will occur at the next heap allocation after the timer expires.
-With @-C0@ or @-C@, context switches will occur as often as
-possible (at every heap allocation).  By default, context switches
-occur every 10 milliseconds.  Note that many interval timers are only
-capable of 10 millisecond granularity, so the default setting may be
-the finest granularity possible, short of a context switch at every
-heap allocation.
-
-[NOTE: this option currently has no effect (version 4.00).  Context
-switches happen when the current heap block is full, i.e. every 4k of
-allocation].
-
-<tag>@-q[v]@:</tag>
-<nidx>-q RTS option</nidx>
-(PARALLEL ONLY) Produce a quasi-parallel profile of thread activity,
-in the file @<program>.qp@.  In the style of @hbcpp@, this profile
-records the movement of threads between the green (runnable) and red
-(blocked) queues.  If you specify the verbose suboption (@-qv@), the
-green queue is split into green (for the currently running thread
-only) and amber (for other runnable threads).  We do not recommend
-that you use the verbose suboption if you are planning to use the
-@hbcpp@ profiling tools or if you are context switching at every heap
-check (with @-C@).
-
-<tag>@-t<num>@:</tag>
-<nidx>-t&lt;num&gt; RTS option</nidx>
-(PARALLEL ONLY) Limit the number of concurrent threads per processor
-to @<num>@.  The default is 32.  Each thread requires slightly over 1K
-<em>words</em> in the heap for thread state and stack objects.  (For
-32-bit machines, this translates to 4K bytes, and for 64-bit machines,
-8K bytes.)
-
-<tag>@-d@:</tag>
-<nidx>-d RTS option (parallel)</nidx>
-(PARALLEL ONLY) Turn on debugging.  It pops up one xterm (or GDB, or
-something...) per PVM processor.  We use the standard @debugger@
-script that comes with PVM3, but we sometimes meddle with the
-@debugger2@ script.  We include ours in the GHC distribution,
-in @ghc/utils/pvm/@.
-
-<tag>@-e<num>@:</tag>
-<nidx>-e&lt;num&gt; RTS option (parallel)</nidx>
-(PARALLEL ONLY) Limit the number of pending sparks per processor to
-@<num>@. The default is 100. A larger number may be appropriate if
-your program generates large amounts of parallelism initially.
-
-<tag>@-Q<num>@:</tag>
-<nidx>-Q&lt;num&gt; RTS option (parallel)</nidx>
-(PARALLEL ONLY) Set the size of packets transmitted between processors
-to @<num>@. The default is 1024 words. A larger number may be
-appropriate if your machine has a high communication cost relative to
-computation speed.
-</descrip>
diff --git a/ghc/docs/users_guide/utils.vsgml b/ghc/docs/users_guide/utils.vsgml
deleted file mode 100644
index 9f0685f..0000000
--- a/ghc/docs/users_guide/utils.vsgml
+++ /dev/null
@@ -1,216 +0,0 @@
-%************************************************************************
-%*                                                                      *
-<sect>Other Haskell utility programs
-<label id="utils">
-<p>
-<nidx>utilities, Haskell</nidx>
-%*                                                                      *
-%************************************************************************
-
-This section describes other program(s) which we distribute, that help
-with the Great Haskell Programming Task.
-
-%************************************************************************
-%*                                                                      *
-<sect1>Makefile dependencies in Haskell: using @mkdependHS@
-<label id="mkdependHS">
-<p>
-<nidx>mkdependHS</nidx>
-<nidx>Makefile dependencies</nidx>
-<nidx>dependencies in Makefiles</nidx>
-%*                                                                      *
-%************************************************************************
-
-You run @mkdependHS@ like this:
-<tscreen><verb>
-  mkdependHS [mkdependHS options] [-- GHC options --] srcfile1 [srcfile2 ...]
-</verb></tscreen>
-or
-<tscreen><verb>
-  ghc -M [mkdependHS options(prefix with -optdep)] [ GHC options ] srcfile1 [srcfile2 ...]
-</verb></tscreen>
-To see @mkdependHS@'s command-line flags, give it a duff flag,
-e.g., @mkdependHS -help@.
-
-In general, if module @A@ contains the line
-<tscreen><verb>
-	import B ...blah...
-</verb></tscreen>
-then @mkdependHS@ will generate a dependency line of the form:
-<tscreen><verb>
-	A.o : B.hi
-</verb></tscreen>
-If module @A@ contains the line 
-<tscreen><verb>
-	import {-# SOURCE #-} B ...blah...
-</verb></tscreen>
-then @mkdependHS@ will generate a dependency line of the form:
-<tscreen><verb>
-	A.o : B.hi-boot
-</verb></tscreen>
-(See Section <ref name="Interface files" id="hi-files"> for details of interface files.)
-If @A@ imports multiple modules, then there will be multiple lines with @A.o@ as the
-target.
-
-By default, @mkdependHS@ generates all the dependencies, and then
-concatenates them onto the end of
-@makefile@ (or @Makefile@ if @makefile@ doesn't exist) bracketed by
-the lines "@# DO NOT DELETE: Beginning of Haskell dependencies@" and
-"@# DO NOT DELETE: End of Haskell dependencies@".  If these lines
-already exist in the @makefile@, @mkdependHS@ deletes the old
-dependencies first.
-
-@mkdependHS@ takes GHC options between @--@ brackets.
-It understands the following ones. Any options between @--@ brackets
-that it doesn't understand are simply ignored; this way you can feed your
-Makefile's standard GHC options to @mkdependHS@ un-filtered.
-<descrip>
-
-<tag>@-cpp@</tag>       Run the C pre-processor over the input files. The
-			default is not to.
-<tag>@-D<blah>@</tag>	A cpp @#define@; usual meaning.
-
-<tag>@-i<dirs>@</tag>	Add @<dirs>@ (colon-separated) to list of directories
-		to search for "import"ed modules.
-
-<tag>@-I<dir>@</tag>	Add @<dir>@ to list of directories to search for
-		.h files (i.e., usual meaning).
-
-<tag>@-syslib <blah>@</tag> This program uses this GHC system library; take
-		appropriate action (e.g., recognise when they are
-		"import"ing a module from that library).
-</descrip>
-
-Here are the @mkdependHS@-specific options (not between @--@'s):
-<descrip>
-<tag>@-v@</tag>	Be verbose.
-<tag>@-v -v@</tag>	Be very verbose.
-<tag>@-w@</tag>	Turn off warnings about interface file shadowing.
-<tag>@-f blah@</tag>
-	Use @blah@ as the makefile, rather than @makefile@
-	or @Makefile@.  If @blah@ doesn't exist, @mkdependHS@ creates it.
-	We often use @-f .depend@ to put the dependencies in @.depend@ and
-	then @include@ the file @.depend@ into @Makefilpe@.
-
-<tag>@-o <osuf>@</tag>	
-	Use @.<osuf>@ as the "target file" suffix ( default: @o@).
-	Multiple @-o@ flags are permitted (GHC2.05 onwards).  Thus "@-o hc -o o@"
-	will generate dependencies for @.hc@ and @.o@ files.
-
-<tag>@-s <suf>@</tag>	
-		Make extra dependencies that declare that files with
-		suffix @.<suf>_<osuf>@ depend on interface files with suffix @.<suf>_hi@, or
-		(for @{-# SOURCE #-}@ imports) on @.hi-boot@.
-		Multiple @-s@ flags are permitted.
-		For example, "@-o hc -s a -s b@" will
-		make dependencies for @.hc@ on @.hi@, @.a_hc@ on @.a_hi@, and @.b_hc@ on @.b_hi@.
-		(Useful in conjunction with NoFib "ways".)  
-
-<tag>@--exclude-module=<file>@</tag> 
-                Regard @<file>@ as "stable"; i.e., exclude it from having
-		dependencies on it.
-
-<tag>@-x@</tag>      same as @--exclude-module@
-
-<tag>@--exclude-directory=<dirs>@</tag> 
-                Regard the colon-separated list of directories @<dirs>@ as containing stable,
-                don't generate any dependencies on modules therein.
-
-<tag>@-Xdirs@</tag>      same as @--exclude-directory@.
-
-<tag>@--include-module=<file>@</tag>
-                Regard @<file>@ as not "stable"; i.e., generate dependencies
-                on it (if any). This option is normally used in conjunction 
-                with the @--exclude-directory@ option.
-<tag>@--include-prelude@</tag>
-		Regard prelude libraries as unstable, i.e., generate dependencies
-		on the prelude modules used (including @Prelude@).
-		This option is normally only used by the various system libraries. If
-		a @-syslib@ option is used, dependencies will also be
-		generated on the library's interfaces. 
-</descrip>
-
-
-%************************************************************************
-%*                                                                      *
-<sect1>Emacs `TAGS' for Haskell: @hstags@
-<label id="hstags">
-<p>
-<nidx>hstags</nidx>
-<nidx>TAGS for Haskell</nidx>
-%*                                                                      *
-%************************************************************************
-
-`Tags' is a facility for indexing the definitions of
-programming-language things in a multi-file program, and then using
-that index to jump around among these definitions.
-
-Rather than scratch your head, saying ``Now where did we define
-`foo'?'', you just do (in Emacs) @M-. foo RET@, and You're There!
-Some people go wild over this stuff...
-
-GHC comes with a program @hstags@, which build Emacs-able TAGS
-files.  The invocation syntax is:
-<tscreen><verb>
-hstags [GHC-options] file [files...]
-</verb></tscreen>
-
-The best thing is just to feed it your GHC command-line flags.
-A good Makefile entry might be:
-<tscreen><verb>
-tags:
-        $(RM) TAGS
-        hstags $(GHC_FLAGS) *.lhs
-</verb></tscreen>
-
-The only flags of its own are: @-v@ to be verbose; @-a@ to
-**APPEND** to the TAGS file, rather than write to it.
-
-Shortcomings: (1)~Instance declarations don't get into the TAGS file
-(but the definitions inside them do); as instances aren't named, this
-is probably just as well.  (2)~Data-constructor definitions don't get
-in.  Go for the corresponding type constructor instead.
-
-(Actually, GHC also comes with @etags@ [for C], and @perltags@
-[for You Know What].  And---I cannot tell a lie---there is Denis
-Howe's @fptags@ [for Haskell, etc.] in the @ghc/CONTRIB@
-section...)
-
-%************************************************************************
-%*                                                                      *
-<sect1>``Yacc for Haskell'': @happy@
-<label id="happy">
-<p>
-<nidx>happy</nidx>
-<nidx>Yacc for Haskell</nidx>
-<nidx>parser generator for Haskell</nidx>
-%*                                                                      *
-%************************************************************************
-
-Andy Gill and Simon Marlow have written a parser-generator for
-Haskell, called @happy@.<nidx>happy parser generator</nidx> @Happy@
-is to Haskell what @Yacc@ is to C.
-
-You can get @happy@ by FTP from @ftp.dcs.gla.ac.uk@ in
-@pub/haskell/happy@, the file @happy-1.5-src.tar.gz@.
-
-@Happy@ is at its shining best when compiled by GHC.
-
-%************************************************************************
-%*                                                                      *
-<sect1>Pretty-printing Haskell: @pphs@
-<label id="pphs">
-<p>
-<nidx>pphs</nidx>
-<nidx>pretty-printing Haskell code</nidx>
-%*                                                                      *
-%************************************************************************
-
-Andrew Preece has written
-@pphs@,<nidx>pphs</nidx><nidx>pretty-printing Haskell</nidx>
-a utility to pretty-print Haskell code in LaTeX documents.
-Keywords in bolds, variables in italics---that sort of thing.  It is
-good at lining up program clauses and equals signs, things that are
-very tiresome to do by hand.
-
-The code is distributed with GHC in @ghc/CONTRIB/pphs@.
diff --git a/ghc/docs/users_guide/vs_haskell.vsgml b/ghc/docs/users_guide/vs_haskell.vsgml
deleted file mode 100644
index 3d08ae8..0000000
--- a/ghc/docs/users_guide/vs_haskell.vsgml
+++ /dev/null
@@ -1,135 +0,0 @@
-%************************************************************************
-%*                                                                      *
-<sect1>Haskell~98 vs.~Glasgow Haskell: language non-compliance
-<label id="vs-Haskell-defn">
-<p>
-<nidx>GHC vs the Haskell 98 language</nidx>
-<nidx>Haskell 98 language vs GHC</nidx>
-%*                                                                      *
-%************************************************************************
-
-This section lists Glasgow Haskell infelicities in its implementation
-of Haskell~98.  See also the ``when things go wrong'' section
-(Section <ref name="What to do when something goes wrong" id="wrong">)
-for information about crashes, space leaks, and other undesirable
-phenomena.
-
-The limitations here are listed in Haskell-Report order (roughly).
-
-%************************************************************************
-%*                                                                      *
-<sect2>Expressions and patterns
-<label id="infelicities-exprs-pats">
-<p>
-%*                                                                      *
-%************************************************************************
-
-<descrip>
-
-%-------------------------------------------------------------------
-<tag>Very long @String@ constants:</tag>
-May not go through.  If you add a ``string gap'' every
-few thousand characters, then the strings can be as long
-as you like.
-
-Bear in mind that string gaps and the @-cpp@<nidx>-cpp option</nidx>
-option don't mix very well (see Section <ref id="c-pre-processor"
-name="The C pre-processor">).
-
-%-------------------------------------------------------------------
-<tag>Very long literal lists:</tag>
-These may tickle a ``yacc stack overflow'' error in the parser.
-(It depends on the Yacc used to build your parser.)
-
-%-------------------------------------------------------------------
-<tag>Single quotes in module names:</tag>
-It might work, but it's just begging for trouble.
-</descrip>
-
-%************************************************************************
-%*                                                                      *
-<sect2>Declarations and bindings
-<label id="infelicities-decls">
-<p>
-%*                                                                      *
-%************************************************************************
-
-<descrip>
-%-------------------------------------------------------------------
-<tag>Derived instances for records:</tag> Hmmm.
-</descrip>
-
-%************************************************************************
-%*                                                                      *
-<sect2>Module system and interface files
-<label id="infelicities-Modules">
-<p>
-%*                                                                      *
-%************************************************************************
-
-<descrip>
-%-------------------------------------------------------------------
-<tag> Namespace pollution </tag>
-
-Several modules internal to GHC are visible in the standard namespace.
-All of these modules begin with @Prel@, so the rule is: don't use any
-modules beginning with @Prel@ in your program, or you will be
-comprehensively screwed.
-
-</descrip>
-
-%************************************************************************
-%*                                                                      *
-<sect2>Numbers, basic types, and built-in classes
-<label id="infelicities-numbers">
-<p>
-%*                                                                      *
-%************************************************************************
-
-<descrip>
-%-------------------------------------------------------------------
-<tag>Unchecked arithmetic:</tag>
-
-Arguably <em>not</em> an infelicity, but... Bear in mind that
-operations on @Int@, @Float@, and @Double@ numbers are
-<em>unchecked</em> for overflow, underflow, and other sad occurrences.
-(note, however that some architectures trap floating-point overflow
-and loss-of-precision and report a floating-point
-exception)<nidx>floating-point exceptions</nidx>.
-
-Use @Integer@, @Rational@, etc., numeric types if this stuff
-keeps you awake at night.
-
-%-------------------------------------------------------------------
-<tag>Multiply-defined array elements---not checked:</tag>
-This code fragment <em>should</em> elicit a fatal error, but it does not:
-<tscreen><verb>
-main = print (array (1,1) [ 1:=2, 1:=3 ])
-</verb></tscreen>
-</descrip>
-
-%************************************************************************
-%*                                                                      *
-<sect2>In Prelude support
-<label id="infelicities-Prelude">
-<p>
-%*                                                                      *
-%************************************************************************
-
-<descrip>
-%-------------------------------------------------------------------
-<tag>Arbitrary-sized tuples:</tag>
-Plain old tuples of arbitrary size <em>do</em> work.
-
-HOWEVER: standard instances for tuples (@Eq@, @Ord@, @Bounded@, @Ix@
-@Read@, and @Show@) are available <em>only</em> up to 5-tuples.
-
-These limitations are easily subvertible, so please ask if you get
-stuck on them.
-
-%-------------------------------------------------------------------
-<tag>Unicode character set:</tag>
-Haskell 98 embraces the Unicode character set, but GHC doesn't
-handle it. Yet.
-
-</descrip>