projectname = bee2-control-user-fifo

build_machine = sting.eecs.berkeley.edu
build_machine_xilinx_path = /opt/xilinx/ISE9.2i_lin/
build_machine_work_dir = ~/$(projectname)
bee2_machine = board4

## you probably want to customize the stuff above this line

## you probably don't want to change anything below this line

xilinx =  cd $(build_machine_work_dir);
xilinx += LD_LIBRARY_PATH=$$LD_LIBRARY_PATH:$(XILINX)/bin/lin
xilinx += XILINX=$(XILINX)
xilinx += PATH=$$PATH:$(XILINX)/bin/lin
xilinx += $(XILINX)/bin/lin/

bitfile = bee2-control-user-fifo.bit

remote_run  = user_unprogram 1;
remote_run += user_program 1 $(bitfile);
remote_run += ./remote_run.pl;
remote_run += cat transcript;

verilog_files = $(find . -name \*.v)

run: upload build/fpga/$(bitfile)
	ssh root@$(bee2_machine) '$(remote_run)'

upload: build/fpga/$(bitfile)
	scp build/fpga/$(bitfile) root@$(bee2_machine):

build/fpga/$(bitfile): $(verilog_files)
	mkdir -p build/fpga/
	rsync -zare --progress --delete --verbose ./ ${build_machine_work_dir}
	time ssh ${build_machine} 'make -C ${build_machine_work_dir} synth XILINX=${build_machine_xilinx_path}'
	cp main.bit build/fpga/$(bitfile)
	scp remote_run.pl root@$(bee2_machine):

synth:
	mkdir -p build/fpga/
	echo work > main.lso
	for A in *.v; do echo verilog work \""$$A"\"; done > main.prj
	mkdir -p tmp
	mkdir -p xst
	rm -rf build/fpga/_ngo
	$(xilinx)xst -intstyle xflow -ifn main.xst -ofn main.syr < main.xst
	$(xilinx)ngdbuild -intstyle xflow -dd _ngo -nt timestamp -uc main.ucf -p xc2vp70-ff1704-6 main.ngc main.ngd
	$(xilinx)map -intstyle xflow -p xc2vp70-ff1704-6 -cm speed -l -pr b -k 4 -c 100 -tx off -o main_map.ncd main.ngd main.pcf
	$(xilinx)par -w -intstyle xflow -pl std -ol std -t 99 main_map.ncd main.ncd main.pcf
	$(xilinx)bitgen -intstyle xflow -d -f main.ut main.ncd
#	$(xilinx)trce -intstyle xflow -e 3 -l 3 -s 6 -xml main main.ncd -o main.twr main.pcf