Makefile

   1 ############################################################################
   2 #
   3 #               This is the top-level Makefile for GHC
   4 #
   5 # Targets:
   6 #
   7 #       bootstrap (DEFAULT)
   8 #               Builds GHC, then builds the libraries,
   9 #               then uses this GHC ("stage 1") to build itself
  10 #               ("stage 2").
  11 #
  12 #       bootstrap2
  13 #               Same as bootstrap
  14 #
  15 #       bootstrap3
  16 #               bootstrap2 + we build GHC one more time ("stage 3")
  17 #
  18 #       stage1
  19 #               Just build up to stage 1
  20 #
  21 #       stage2
  22 #               Just build stage 2 (stage 1 must be built)
  23 #
  24 #       stage3
  25 #               Just build stage 3 (stage 2 must be built)
  26 #
  27 #       all
  28 #               Same as bootstrap
  29 #
  30 #       install
  31 #               Install everything, including stage 2 compiler by default
  32 #               (override with stage=3, for example).
  33 #
  34 #       dist
  35 #               Make a source dist (WARNING: runs 'make distclean' first)
  36 #
  37 #       binary-dist
  38 #               Builds a binary distribution
  39 #
  40 #       hc-file-bundle
  41 #               Builds an HC-file bundle, for bootstrapping
  42 #
  43 #       clean, distclean, maintainer-clean
  44 #               Increasing levels of cleanliness
  45 #
  46 ############################################################################
  47
  48 TOP=.
  49 include $(TOP)/mk/boilerplate.mk
  50
  51 #
  52 # Order is important! It's e.g. necessary to descend into include/
  53 # before the rest to have a config.h, etc.
  54 #
  55 # If we're booting from .hc files, swap the order
  56 # we descend into subdirs - to boot utils must be before driver.
  57 #
  58 .PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3
  59
  60 # We can't 'make boot' in libraries until stage1 is built
  61 ifeq "$(BootingFromHc)" "YES"
  62 SUBDIRS_NOLIB = includes rts compat compiler docs utils driver
  63 else
  64 SUBDIRS_NOLIB = includes compat utils driver docs compiler rts
  65 endif
  66
  67 SUBDIRS = $(SUBDIRS_NOLIB) libraries
  68
  69 # Sanity check that all the core libraries are in the tree, to catch
  70 # failure to run darcs-all.
  71 check-packages :
  72         @for d in `cat libraries/core-packages`; do \
  73           if test ! -d libraries/$$d; then \
  74              echo "Looks like you're missing libraries/$$d,"; \
  75              echo "maybe you haven't done './darcs-all get'?"; \
  76              exit 1; \
  77           fi \
  78         done
  79         @if test ! -e libraries/base/configure; then \
  80             echo "Looks like you're missing base's configure script."; \
  81             echo "Did you run 'sh boot' at the top level?"; \
  82             exit 1; \
  83         fi
  84
  85 stage1 : check-packages
  86         $(MAKE) -C utils/mkdependC boot
  87         @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
  88         for i in $(SUBDIRS_NOLIB); do \
  89           echo "------------------------------------------------------------------------"; \
  90           echo "== $(MAKE) boot $(MFLAGS);"; \
  91           echo " in $(shell pwd)/$$i"; \
  92           echo "------------------------------------------------------------------------"; \
  93           $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \
  94           if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
  95         done; \
  96         for i in $(SUBDIRS_NOLIB); do \
  97           echo "------------------------------------------------------------------------"; \
  98           echo "== $(MAKE) all $(MFLAGS);"; \
  99           echo " in $(shell pwd)/$$i"; \
 100           echo "------------------------------------------------------------------------"; \
 101           $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \
 102           if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
 103         done
 104         $(MAKE) -C libraries boot
 105         $(MAKE) -C libraries all
 106
 107 stage2 : check-packages
 108         $(MAKE) -C compiler boot stage=2
 109         $(MAKE) -C compiler stage=2
 110
 111 stage3 : check-packages
 112         $(MAKE) -C compiler boot stage=3
 113         $(MAKE) -C compiler stage=3
 114
 115 bootstrap  : bootstrap2
 116
 117 bootstrap2 : stage1
 118         $(MAKE) stage2
 119
 120 bootstrap3 : bootstrap2
 121         $(MAKE) stage3
 122
 123 all :: bootstrap
 124
 125 # -----------------------------------------------------------------------------
 126 # Installing
 127
 128 # We want to install the stage 2 bootstrapped compiler by default, but we let
 129 # the user override this by saying 'make install stage=1', for example.
 130 ifeq "$(stage)" ""
 131 INSTALL_STAGE = stage=2
 132 else
 133 INSTALL_STAGE =
 134 endif
 135
 136 # Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too
 137 install :: check-packages
 138         @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
 139         for i in $(SUBDIRS); do \
 140           echo "------------------------------------------------------------------------"; \
 141           echo "== $(MAKE) $@ $(MFLAGS);"; \
 142           echo " in $(shell pwd)/$$i"; \
 143           echo "------------------------------------------------------------------------"; \
 144           $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
 145           if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
 146         done
 147
 148 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 149 # These files need to be in the InstallShield
 150 # INSTALL_DATAS rather than INSTALL_DOCS is used so these files go
 151 # in the top-level directory of the distribution
 152 INSTALL_DATAS += ANNOUNCE LICENSE README
 153 endif
 154
 155 # If installing on Windows with MinGW32, copy the gcc compiler, headers and libs
 156 # and the perl interpreter and dll into the GHC prefix directory.
 157 # Gcc and Perl source locations derived from configuration data.
 158 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 159 ifneq "$(WhatGccIsCalled)" ""
 160 install ::
 161         -mkdir $(prefix)/gcc-lib
 162         -mkdir $(prefix)/include
 163         -mkdir $(prefix)/include/mingw
 164         -cp -rp $(GccDir)../include/* $(prefix)/include/mingw
 165         -cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
 166         -cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
 167         -cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
 168         -cp $(GccDir)../lib/*.* $(prefix)/gcc-lib
 169         -cp $(GccDir)gcc.exe $(prefix)
 170         -cp $(GccDir)as.exe $(prefix)/gcc-lib
 171         -cp $(GccDir)ld.exe $(prefix)/gcc-lib
 172         -cp $(GccDir)dllwrap.exe $(prefix)/gcc-lib
 173         -cp $(GccDir)dlltool.exe $(prefix)/gcc-lib
 174         -cp $(GhcDir)../perl.exe $(prefix)
 175         -cp $(GhcDir)../perl56.dll $(prefix)
 176 endif
 177 endif
 178
 179 install-docs ::
 180         @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
 181         for i in $(SUBDIRS); do \
 182           echo "------------------------------------------------------------------------"; \
 183           echo "== $(MAKE) $@ $(MFLAGS);"; \
 184           echo " in $(shell pwd)/$$i"; \
 185           echo "------------------------------------------------------------------------"; \
 186           $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
 187           if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
 188         done
 189
 190 # -----------------------------------------------------------------------------
 191 # Making a binary distribution
 192 #
 193 # `dist' `binary-dist'
 194 #      Create a distribution tar file for this program. The tar file
 195 #      should be set up so that the file names in the tar file start with
 196 #      a subdirectory name which is the name of the package it is a
 197 #      distribution for. This name can include the version number.
 198 #
 199 #      For example, the distribution tar file of GCC version 1.40 unpacks
 200 #      into a subdirectory named `gcc-1.40'.
 201 #
 202 #      The easiest way to do this is to create a subdirectory
 203 #      appropriately named, use ln or cp to install the proper files in
 204 #      it, and then tar that subdirectory.
 205 #
 206 #      The dist target should explicitly depend on all non-source files
 207 #      that are in the distribution, to make sure they are up to date in
 208 #      the distribution. See Making Releases.
 209 #
 210 #       binary-dist is a GHC addition for binary distributions
 211 #
 212
 213 ifneq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 214 BinDistShScripts = ghc-$(ProjectVersion) ghci-$(ProjectVersion) ghc-pkg-$(ProjectVersion) hsc2hs-ghc
 215 else
 216 BinDistShScripts =
 217 endif
 218
 219 BinDistPrlScripts = ghcprof
 220 BinDistLibPrlScripts = ghc-asm ghc-split
 221 BinDistBins = hp2ps runghc
 222 BinDistLinks = ghc ghci ghc-pkg
 223 BinDistLibSplicedFiles = package.conf
 224 BinDistDirs = includes compiler docs driver rts utils
 225
 226 BIN_DIST_TARBALL=ghc-$(ProjectVersion)-$(TARGETPLATFORM).tar.bz2
 227
 228 BIN_DIST_TOP= distrib/Makefile \
 229               distrib/configure-bin.ac \
 230               distrib/INSTALL \
 231               distrib/README \
 232               ANNOUNCE \
 233               LICENSE \
 234               utils/mkdirhier/mkdirhier \
 235               install-sh \
 236               config.guess \
 237               config.sub   \
 238               aclocal.m4
 239
 240 ifeq "$(darwin_TARGET_OS)" "1"
 241 BIN_DIST_TOP+=mk/fix_install_names.sh
 242 endif
 243
 244 .PHONY: binary-dist-pre% binary-dist binary-pack
 245
 246 BINARY_DIST_PRE_RULES=$(foreach d,$(BinDistDirs),binary-dist-pre-$d)
 247
 248 binary-dist:: binary-dist-pre $(BINARY_DIST_PRE_RULES)
 249
 250 binary-dist-pre::
 251 ifeq "$(BIN_DIST)" ""
 252         @echo "WARNING: To run the binary-dist target, you need to set BIN_DIST=1 in mk/build.mk"
 253         @false
 254 endif
 255         -rm -rf $(BIN_DIST_DIR)
 256         -$(RM) $(BIN_DIST_DIR).tar.gz
 257         $(MKDIRHIER) $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)
 258         $(MKDIRHIER) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)
 259         $(MKDIRHIER) $(BIN_DIST_DIR)/share
 260
 261 $(BINARY_DIST_PRE_RULES): binary-dist-pre-%:
 262         $(MAKE) -C $* $(MFLAGS) $(INSTALL_STAGE) install \
 263                 prefix=$(BIN_DIST_DIR) \
 264                 exec_prefix=$(BIN_DIST_DIR) \
 265                 bindir=$(BIN_DIST_DIR)/bin/$(TARGETPLATFORM) \
 266                 libdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
 267                 libexecdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
 268                 datadir=$(BIN_DIST_DIR)/share
 269
 270 VARFILE=$(BIN_DIST_DIR)/Makefile-vars.in
 271
 272 binary-dist::
 273         @for i in $(BIN_DIST_TOP); do \
 274           if test -f "$$i"; then \
 275              echo cp $$i $(BIN_DIST_DIR); \
 276              cp $$i $(BIN_DIST_DIR); \
 277           fi; \
 278         done;
 279         @echo "Configuring the Makefile for this project..."
 280         echo                                                         >  $(VARFILE)
 281         echo "package = ghc"                                         >> $(VARFILE)
 282         echo "version = $(ProjectVersion)"                           >> $(VARFILE)
 283         echo "PACKAGE_SH_SCRIPTS = $(BinDistShScripts)"              >> $(VARFILE)
 284         echo "PACKAGE_PRL_SCRIPTS = $(BinDistPrlScripts)"            >> $(VARFILE)
 285         echo "PACKAGE_LIB_PRL_SCRIPTS = $(BinDistLibPrlScripts)"     >> $(VARFILE)
 286         echo "PACKAGE_LIB_SPLICED_FILES = $(BinDistLibSplicedFiles)" >> $(VARFILE)
 287         echo "PACKAGE_BINS = $(BinDistBins)"                         >> $(VARFILE)
 288         echo "PACKAGE_OPT_BINS = $(BinDistOptBins)"                  >> $(VARFILE)
 289         echo "PACKAGE_LINKS = $(BinDistLinks)"                       >> $(VARFILE)
 290         cat distrib/Makefile-bin-vars.in                             >> $(VARFILE)
 291         @echo "Generating a shippable configure script.."
 292         $(MV) $(BIN_DIST_DIR)/configure-bin.ac $(BIN_DIST_DIR)/configure.ac
 293         ( cd $(BIN_DIST_DIR); autoconf )
 294 #
 295 # binary dist'ing the documentation.
 296 # The default documentation to build/install is given below; overrideable
 297 # via build.mk or the 'make' command-line.
 298
 299 ifndef BINDIST_DOC_WAYS
 300
 301 BINDIST_DOC_WAYS = $(XMLDocWays)
 302
 303 # ifneq "$(XSLTPROC)" ""
 304 # BINDIST_DOC_WAYS = html
 305 # ifneq "$(FOP)" ""
 306 # BINDIST_DOC_WAYS += ps pdf
 307 # else
 308 # ifneq "$(PDFXMLTEX)" ""
 309 # BINDIST_DOC_WAYS += pdf
 310 # endif
 311 # ifneq "$(XMLTEX)" ""
 312 # ifneq "$(DVIPS)" ""
 313 # BINDIST_DOC_WAYS += ps
 314 # endif # DVIPS
 315 # endif # XMLTEX
 316 # endif # FOP
 317 # endif # XSLTPROC
 318
 319 endif # BINDIST_DOC_WAYS
 320
 321 ifneq "$(DIR_DOCBOOK_XSL)" ""
 322 .PHONY: binary-dist-doc-%
 323
 324 BINARY_DIST_DOC_RULES=$(foreach d,$(BinDistDirs),binary-dist-doc-$d)
 325
 326 binary-dist :: $(BINARY_DIST_DOC_RULES)
 327
 328 $(BINARY_DIST_DOC_RULES): binary-dist-doc-%:
 329         $(MAKE) -C $* $(MFLAGS) $(BINDIST_DOC_WAYS)
 330         $(MAKE) -C $* $(MFLAGS) install-docs \
 331                         MAKING_BIN_DIST=1 \
 332                 XMLDocWays="$(BINDIST_DOC_WAYS)" \
 333                 prefix=$(BIN_DIST_DIR) \
 334                 exec_prefix=$(BIN_DIST_DIR) \
 335                 bindir=$(BIN_DIST_DIR)/bin/$(TARGETPLATFORM) \
 336                 libdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
 337                 libexecdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
 338                 datadir=$(BIN_DIST_DIR)/share
 339 endif
 340
 341 # Rename scripts to $i.prl and $i.sh where necessary.
 342 # ToDo: do this in a cleaner way...
 343
 344 ifneq "$(BinDistPrlScripts)" ""
 345 binary-dist::
 346         @for i in $(BinDistPrlScripts); do \
 347              echo "Renaming $$i to $$i.prl"; \
 348             $(MV) $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)/$$i  $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)/$$i.prl; \
 349         done
 350 endif
 351
 352 ifneq "$(BinDistLibPrlScripts)" ""
 353 binary-dist::
 354         @for i in $(BinDistLibPrlScripts); do \
 355              echo "Renaming $$i to $$i.prl"; \
 356             $(MV) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)/$$i  $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)/$$i.prl; \
 357         done
 358 endif
 359
 360 ifneq "$(BinDistShScripts)" ""
 361 binary-dist::
 362         @for i in $(BinDistShScripts); do \
 363             if test -x $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)/$$i ; then \
 364                 echo "Renaming $$i to $$i.sh"; \
 365                 $(MV) $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)/$$i  $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)/$$i.sh; \
 366             fi \
 367         done
 368 endif
 369
 370 .PHONY: binary-dist-doc-%
 371
 372 binary-dist::
 373         $(MAKE) -C libraries binary-dist
 374
 375 # Jiggle the files around to make a valid Windows distribution if necessary
 376 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 377 binary-dist :: fiddle-binary-dist
 378 endif
 379
 380 .PHONY: fiddle-binary-dist
 381 fiddle-binary-dist:
 382         cd $(BIN_DIST_DIR) && ../distrib/prep-bin-dist-mingw
 383 # Tar up the distribution and build a manifest
 384 binary-dist :: tar-binary-dist
 385
 386 .PHONY: tar-binary-dist
 387 tar-binary-dist:
 388         ( cd $(BIN_DIST_TOPDIR); tar cf - $(BIN_DIST_NAME) | bzip2 >$(BIN_DIST_TARBALL) )
 389         ( cd $(BIN_DIST_TOPDIR); bunzip2 -c $(BIN_DIST_TARBALL) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >bin-manifest-$(ProjectVersion) )
 390
 391 # Upload the distribution and documentation
 392 ifneq "$(PublishLocation)" ""
 393 binary-dist :: publish-binary-dist
 394 endif
 395
 396 .PHONY: publish-binary-dist
 397 publish-binary-dist :
 398         @for i in 0 1 2 3 4 5 6 7 8 9; do \
 399                 echo "Try $$i: $(PublishCp) $(BIN_DIST_TARBALL) $(PublishLocation)"; \
 400                 if $(PublishCp) $(BIN_DIST_TARBALL) $(PublishLocation); then break; fi; \
 401         done
 402         $(PublishCp) -r $(BIN_DIST_DIR)/share/html/* $(PublishLocation)/docs
 403
 404
 405 binary-dist::
 406         @echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"
 407
 408 # -----------------------------------------------------------------------------
 409 # Building source distributions
 410 #
 411 # Do it like this:
 412 #
 413 #       $ make
 414 #       $ make dist
 415 #
 416 # WARNING: `make dist' calls `make distclean' before tarring up the tree.
 417 #
 418
 419 .PHONY: dist
 420
 421 #
 422 # Directory in which we're going to build the src dist
 423 #
 424 SRC_DIST_NAME=ghc-$(ProjectVersion)
 425 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
 426
 427 #
 428 # Files to include in source distributions
 429 #
 430 SRC_DIST_DIRS += mk docs distrib $(filter-out docs distrib,$(SUBDIRS))
 431 SRC_DIST_FILES += \
 432         configure.ac config.guess config.sub configure \
 433         aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
 434         ghc.spec.in VERSION
 435
 436 # -----------------------------------------------------------------------------
 437 # Source distributions
 438
 439 # A source dist is built from a complete build tree, because we
 440 # require some extra files not contained in a darcs checkout: the
 441 # output from Happy and Alex, for example.
 442 #
 443 # The steps performed by 'make dist' are as follows:
 444 #   - create a complete link-tree of the current build tree in /tmp
 445 #   - run 'make distclean' on that tree
 446 #   - remove a bunch of other files that we know shouldn't be in the dist
 447 #   - tar up first the extralibs package, then the main source package
 448
 449 EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/libraries/%, $(shell cat libraries/extra-packages))
 450
 451 SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2
 452 SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2
 453
 454 VERSION :
 455         echo $(ProjectVersion) >VERSION
 456
 457 dist :: VERSION
 458
 459 dist ::
 460         $(RM) -rf $(SRC_DIST_DIR)
 461         $(RM) $(SRC_DIST_NAME).tar.gz
 462         mkdir $(SRC_DIST_DIR)
 463         ( cd $(SRC_DIST_DIR) \
 464           && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \
 465           && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \
 466           && $(MAKE) distclean \
 467           && $(RM) -rf compiler/stage[123] mk/build.mk \
 468           && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \
 469         )
 470         tar chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL)
 471         $(RM) -rf $(EXTRA_LIBS)
 472         tar chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL)
 473
 474 # Upload the distribution(s)
 475 # Retrying is to work around buggy firewalls that corrupt large file transfers
 476 # over SSH.
 477 ifneq "$(PublishLocation)" ""
 478 dist ::
 479         @for i in 0 1 2 3 4 5 6 7 8 9; do \
 480                 echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)"; \
 481                 if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation); then break; fi\
 482         done
 483         @for i in 0 1 2 3 4 5 6 7 8 9; do \
 484                 echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)"; \
 485                 if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation); then break; fi\
 486         done
 487 endif
 488
 489 # -----------------------------------------------------------------------------
 490 # HC file bundles
 491
 492 hc-file-bundle :
 493         $(RM) -r ghc-$(ProjectVersion)
 494         $(LN_S) . ghc-$(ProjectVersion)
 495         $(FIND) ghc-$(ProjectVersion)/compiler \
 496              ghc-$(ProjectVersion)/utils \
 497              ghc-$(ProjectVersion)/compat \
 498              ghc-$(ProjectVersion)/libraries -follow \
 499           \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go
 500         for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \
 501              if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \
 502                 echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \
 503              fi; \
 504         done;
 505         for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \
 506              if test "x$$f" != "x"; then \
 507                 echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \
 508              fi; \
 509         done;
 510         echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go
 511         echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go
 512         echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go
 513         echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go
 514         echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
 515         tar czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go`
 516
 517 # -----------------------------------------------------------------------------
 518 # Cleaning
 519
 520 CLEAN_FILES += hc-files-to-go *-hc.tar.gz
 521
 522 DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \
 523         ghc.spec docs/users_guide/ug-book.xml
 524
 525 # don't clean config.mk: it's needed when cleaning stuff later on
 526 LATE_DIST_CLEAN_FILES += mk/config.mk
 527
 528 # VERSION is shipped in a source dist
 529 MAINTAINER_CLEAN_FILES += VERSION
 530
 531 extraclean::
 532         $(RM) -rf autom4te.cache
 533
 534 # -----------------------------------------------------------------------------
 535
 536 # Turn off target.mk's rules for 'all', 'boot' and 'install'.
 537 NO_BOOT_TARGET=YES
 538 NO_ALL_TARGET=YES
 539 NO_INSTALL_TARGET=YES
 540
 541 include $(TOP)/mk/target.mk
 542
 543 # -----------------------------------------------------------------------------
 544