Makefile

   1 ############################################################################
   2 #
   3 #               This is the top-level Makefile for GHC
   4 #
   5 # Targets:
   6 #
   7 #       bootstrap (DEFAULT)
   8 #               Builds GHC, then builds the libraries,
   9 #               then uses this GHC ("stage 1") to build itself
  10 #               ("stage 2").
  11 #
  12 #       bootstrap2
  13 #               Same as bootstrap
  14 #
  15 #       bootstrap3
  16 #               bootstrap2 + we build GHC one more time ("stage 3")
  17 #
  18 #       stage1
  19 #               Just build up to stage 1
  20 #
  21 #       stage2
  22 #               Just build stage 2 (stage 1 must be built)
  23 #
  24 #       stage3
  25 #               Just build stage 3 (stage 2 must be built)
  26 #
  27 #       all
  28 #               Same as bootstrap
  29 #
  30 #       install
  31 #               Install everything, including stage 2 compiler by default
  32 #               (override with stage=3, for example).
  33 #
  34 #       dist
  35 #               Make a source dist (WARNING: runs 'make distclean' first)
  36 #
  37 #       binary-dist
  38 #               Builds a binary distribution
  39 #
  40 #       framework-pkg  [MacOS only]
  41 #               Builds /Library/Frameworks/GHC.framework wrapped into a Mac
  42 #               installer package
  43 #
  44 #       framework-binary-dist  [MacOS only]
  45 #               Builds GHC.framework encapsulating a binary distribution
  46 #               (to give a relocatable framework)
  47 #
  48 #       hc-file-bundle
  49 #               Builds an HC-file bundle, for bootstrapping
  50 #
  51 #       clean, distclean, maintainer-clean
  52 #               Increasing levels of cleanliness
  53 #
  54 ############################################################################
  55
  56 TOP=.
  57 include $(TOP)/mk/boilerplate.mk
  58
  59 #
  60 # Order is important! It's e.g. necessary to descend into include/
  61 # before the rest to have a config.h, etc.
  62 #
  63 # If we're booting from .hc files, swap the order
  64 # we descend into subdirs - to boot utils must be before driver.
  65 #
  66 .PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3
  67
  68 # We can't 'make boot' in libraries until stage1 is built
  69 ifeq "$(BootingFromHc)" "YES"
  70 SUBDIRS_BUILD = includes rts compiler docs utils driver
  71 else
  72 SUBDIRS_BUILD = includes utils driver docs compiler rts libraries/Cabal/doc
  73 endif
  74
  75 SUBDIRS = gmp libffi includes utils driver docs rts libraries compiler libraries/Cabal/doc
  76
  77 # Sanity check that all the boot libraries are in the tree, to catch
  78 # failure to run darcs-all.
  79 check-packages :
  80         @ds=`cat libraries/boot-packages`;\
  81         for d in $$ds; do \
  82           if test ! -d libraries/$$d; then \
  83              echo "Looks like you're missing libraries/$$d,"; \
  84              echo "maybe you haven't done './darcs-all get'?"; \
  85              exit 1; \
  86           fi \
  87         done
  88         @if test ! -f libraries/base/configure; then \
  89             echo "Looks like you're missing base's configure script."; \
  90             echo "Did you run 'sh boot' at the top level?"; \
  91             exit 1; \
  92         fi
  93
  94 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
  95 ifneq "$(WhatGccIsCalled)" ""
  96 GCC_LIB_DEP = stamp.inplace-gcc-lib
  97 endif
  98 endif
  99
 100 stage1 : $(GCC_LIB_DEP) check-packages
 101         $(MAKE) -C libraries boot
 102         $(MAKE) -C gmp       all
 103         $(MAKE) -C libffi    all
 104         $(MAKE) -C utils/mkdependC boot
 105         @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
 106         for i in $(SUBDIRS_BUILD); do \
 107           echo "------------------------------------------------------------------------"; \
 108           echo "== $(MAKE) boot $(MFLAGS);"; \
 109           echo " in $(shell pwd)/$$i"; \
 110           echo "------------------------------------------------------------------------"; \
 111           $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \
 112           if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
 113         done; \
 114         for i in $(SUBDIRS_BUILD); do \
 115           echo "------------------------------------------------------------------------"; \
 116           echo "== $(MAKE) all $(MFLAGS);"; \
 117           echo " in $(shell pwd)/$$i"; \
 118           echo "------------------------------------------------------------------------"; \
 119           $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \
 120           if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
 121         done
 122         $(MAKE) -C libraries all
 123
 124 # When making distributions (i.e., whether with binary-dist or using the
 125 # vanilla install target to create an installer package), we can have problems
 126 # if some things (e.g. ghc-pkg) are compiled with the bootstrapping compiler
 127 # and some (e.g. the stage 2 compiler) with the stage1 compiler. See #1860 for
 128 # an example.  Thus, we explicitly build a second version with the stage 1
 129 # compiler of all utils that get installed and of all extra support binaries
 130 # includes in binary dists.
 131 stage2 : check-packages
 132         $(MAKE) -C compiler boot stage=2
 133         $(MAKE) -C compiler stage=2
 134
 135
 136 stage3 : check-packages
 137         $(MAKE) -C compiler boot stage=3
 138         $(MAKE) -C compiler stage=3
 139
 140 bootstrap  : bootstrap2
 141
 142 bootstrap2 : stage1
 143         $(MAKE) stage2
 144
 145 bootstrap3 : bootstrap2
 146         $(MAKE) stage3
 147
 148 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 149 ifneq "$(WhatGccIsCalled)" ""
 150 all :: stamp.inplace-gcc-lib
 151
 152 .PHONY: stamp.inplace-gcc-lib
 153
 154 # This is a hack to make Cabal able to find ld when we run tests with
 155 # the inplace ghc. We should probably install all the gcc stuff in our
 156 # tree somewhere, and then have install copy it from there rather than
 157 # from the filesystem.
 158 stamp.inplace-gcc-lib:
 159         $(RM) -r compiler/gcc-lib
 160         mkdir compiler/gcc-lib
 161         cp $(LD) compiler/gcc-lib
 162         touch $@
 163
 164 clean ::
 165         $(RM) -r compiler/gcc-lib
 166         $(RM) -f inplace-gcc-lib
 167 endif
 168 endif
 169
 170 all :: bootstrap
 171
 172 # -----------------------------------------------------------------------------
 173 # Installing
 174
 175 # We want to install the stage 2 bootstrapped compiler by default, but we let
 176 # the user override this by saying 'make install stage=1', for example.
 177 ifeq "$(stage)" ""
 178 INSTALL_STAGE = stage=2
 179 else
 180 INSTALL_STAGE =
 181 endif
 182
 183 install-strip:
 184         $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install
 185
 186 # Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too
 187 install :: check-packages
 188         @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
 189         for i in $(SUBDIRS); do \
 190           echo "------------------------------------------------------------------------"; \
 191           echo "== $(MAKE) $@ $(MFLAGS);"; \
 192           echo " in $(shell pwd)/$$i"; \
 193           echo "------------------------------------------------------------------------"; \
 194           $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
 195           if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
 196         done
 197
 198 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 199 # These files need to be in the InstallShield
 200 # INSTALL_DATAS rather than INSTALL_DOCS is used so these files go
 201 # in the top-level directory of the distribution
 202 INSTALL_DATAS += ANNOUNCE LICENSE README
 203 endif
 204
 205 # If installing on Windows with MinGW32, copy the gcc compiler, headers and libs
 206 # and the perl interpreter and dll into the GHC prefix directory.
 207 # Gcc and Perl source locations derived from configuration data.
 208 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 209 ifneq "$(WhatGccIsCalled)" ""
 210 install ::
 211         -mkdir $(prefix)/gcc-lib
 212         -mkdir $(prefix)/include
 213         -mkdir $(prefix)/include/mingw
 214         -cp -rp $(GccDir)../include/* $(prefix)/include/mingw
 215         -cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
 216         -cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
 217         -cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
 218         -cp $(GccDir)../lib/*.* $(prefix)/gcc-lib
 219         -cp $(GccDir)gcc.exe $(prefix)
 220         -cp $(GccDir)as.exe $(prefix)/gcc-lib
 221         -cp $(GccDir)ld.exe $(prefix)/gcc-lib
 222         -cp $(GccDir)dllwrap.exe $(prefix)/gcc-lib
 223         -cp $(GccDir)dlltool.exe $(prefix)/gcc-lib
 224         -cp $(GhcDir)../perl.exe $(prefix)
 225         -cp $(GhcDir)../perl56.dll $(prefix)
 226 endif
 227 endif
 228
 229 # Install gcc-extra-opts
 230 install ::
 231         $(INSTALL_DIR) $(DESTDIR)$(libdir)
 232         $(INSTALL_DATA) $(INSTALL_OPTS) extra-gcc-opts $(DESTDIR)$(libdir)
 233
 234 install-docs ::
 235         @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
 236         for i in $(SUBDIRS); do \
 237           echo "------------------------------------------------------------------------"; \
 238           echo "== $(MAKE) $@ $(MFLAGS);"; \
 239           echo " in $(shell pwd)/$$i"; \
 240           echo "------------------------------------------------------------------------"; \
 241           $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
 242           if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
 243         done
 244
 245 # -----------------------------------------------------------------------------
 246 # Making a binary distribution
 247 #
 248 # `dist' `binary-dist'
 249 #      Create a distribution tar file for this program. The tar file
 250 #      should be set up so that the file names in the tar file start with
 251 #      a subdirectory name which is the name of the package it is a
 252 #      distribution for. This name can include the version number.
 253 #
 254 #      For example, the distribution tar file of GCC version 1.40 unpacks
 255 #      into a subdirectory named `gcc-1.40'.
 256 #
 257 #      The easiest way to do this is to create a subdirectory
 258 #      appropriately named, use ln or cp to install the proper files in
 259 #      it, and then tar that subdirectory.
 260 #
 261 #      The dist target should explicitly depend on all non-source files
 262 #      that are in the distribution, to make sure they are up to date in
 263 #      the distribution. See Making Releases.
 264 #
 265 #       binary-dist is a GHC addition for binary distributions
 266 #
 267
 268 binary-dist::
 269         -rm -rf $(BIN_DIST_DIR)
 270         -$(RM) $(BIN_DIST_TARBALL)
 271
 272 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 273
 274 binary-dist::
 275         $(MAKE) prefix=$(BIN_DIST_DIR) install
 276         $(MAKE) prefix=$(BIN_DIST_DIR) install-docs
 277
 278 binary-dist::
 279         cd $(BIN_DIST_DIR) && $(SHELL) ../distrib/prep-bin-dist-mingw
 280
 281 binary-dist::
 282         $(MKDIRHIER) $(BIN_DIST_DIR)/icons
 283         cp distrib/hsicon.ico $(BIN_DIST_DIR)/icons
 284
 285 else
 286
 287 BinDistDirs = includes compiler docs rts
 288
 289 BIN_DIST_TOP= distrib/Makefile \
 290               distrib/configure-bin.ac \
 291               distrib/INSTALL \
 292               distrib/README \
 293               ANNOUNCE \
 294               LICENSE \
 295               install-sh \
 296               extra-gcc-opts.in \
 297               config.guess \
 298               config.sub   \
 299               aclocal.m4
 300
 301 ifeq "$(darwin_TARGET_OS)" "1"
 302 BIN_DIST_TOP+=mk/fix_install_names.sh
 303 endif
 304
 305 .PHONY: binary-dist-pre% binary-dist
 306
 307 binary-dist:: binary-dist-pre
 308
 309 binary-dist-pre::
 310         $(MKDIRHIER) $(BIN_DIST_DIR)/mk
 311         echo 'include $$(TOP)/Makefile-vars' >  $(BIN_DIST_DIR)/mk/boilerplate.mk
 312         echo 'include $$(TOP)/mk/package.mk' >  $(BIN_DIST_DIR)/mk/target.mk
 313         echo 'include $$(TOP)/mk/install.mk' >> $(BIN_DIST_DIR)/mk/target.mk
 314         echo 'include $$(TOP)/mk/recurse.mk' >> $(BIN_DIST_DIR)/mk/target.mk
 315         cp mk/package.mk $(BIN_DIST_DIR)/mk/
 316         cp mk/install.mk $(BIN_DIST_DIR)/mk/
 317         cp mk/recurse.mk $(BIN_DIST_DIR)/mk/
 318         cp mk/fptools.css $(BIN_DIST_DIR)/mk/
 319         $(MKDIRHIER) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)
 320         $(MKDIRHIER) $(BIN_DIST_DIR)/share
 321
 322 binary-dist::
 323         $(MAKE) -C gmp       binary-dist DOING_BIN_DIST=YES
 324         $(MAKE) -C includes  binary-dist DOING_BIN_DIST=YES
 325         $(MAKE) -C compiler  binary-dist DOING_BIN_DIST=YES $(INSTALL_STAGE)
 326         $(MAKE) -C rts       binary-dist DOING_BIN_DIST=YES
 327         $(MAKE) -C driver    binary-dist DOING_BIN_DIST=YES
 328         $(MAKE) -C utils     binary-dist DOING_BIN_DIST=YES
 329         $(MAKE) -C docs      binary-dist DOING_BIN_DIST=YES
 330         $(MAKE) -C libraries binary-dist DOING_BIN_DIST=YES
 331         $(MAKE) -C libraries/Cabal/doc binary-dist DOING_BIN_DIST=YES
 332
 333 VARFILE=$(BIN_DIST_DIR)/Makefile-vars.in
 334
 335 binary-dist::
 336         @for i in $(BIN_DIST_TOP); do \
 337           if test -f "$$i"; then \
 338              echo cp $$i $(BIN_DIST_DIR); \
 339              cp $$i $(BIN_DIST_DIR); \
 340           fi; \
 341         done;
 342         @echo "Configuring the Makefile for this project..."
 343         echo                                                         >  $(VARFILE)
 344         echo "package = ghc"                                         >> $(VARFILE)
 345         echo "version = $(ProjectVersion)"                           >> $(VARFILE)
 346         echo "ProjectVersion = $(ProjectVersion)"                    >> $(VARFILE)
 347         echo "HaveLibGmp = $(HaveLibGmp)"                            >> $(VARFILE)
 348         echo "GhcLibsWithUnix = $(GhcLibsWithUnix)"                  >> $(VARFILE)
 349         echo "GhcWithInterpreter = $(GhcWithInterpreter)"            >> $(VARFILE)
 350         echo "GhcHasEditline = $(GhcHasEditline)"                    >> $(VARFILE)
 351         echo "BootingFromHc = $(BootingFromHc)"                      >> $(VARFILE)
 352         echo "XMLDocWays = $(XMLDocWays)"                            >> $(VARFILE)
 353         # We won't actually use xsltproc, but we need to know if it's "" or not
 354         echo "XSLTPROC = $(XSLTPROC)"                                >> $(VARFILE)
 355         echo "TARGETPLATFORM = $(TARGETPLATFORM)"                    >> $(VARFILE)
 356         echo "HADDOCK_DOCS = $(HADDOCK_DOCS)"                        >> $(VARFILE)
 357
 358         cat distrib/Makefile-bin-vars.in                             >> $(VARFILE)
 359         @echo "Generating a shippable configure script.."
 360         $(MV) $(BIN_DIST_DIR)/configure-bin.ac $(BIN_DIST_DIR)/configure.ac
 361         ( cd $(BIN_DIST_DIR); autoreconf )
 362 endif
 363
 364 # Tar up the distribution and build a manifest
 365 binary-dist :: tar-binary-dist
 366
 367 .PHONY: tar-binary-dist
 368 tar-binary-dist:
 369         ( cd $(BIN_DIST_TOPDIR_ABS); tar cf - $(BIN_DIST_NAME) | bzip2 >$(BIN_DIST_TARBALL) )
 370         ( cd $(BIN_DIST_TOPDIR_ABS); bunzip2 -c $(BIN_DIST_TARBALL) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >$(FPTOOLS_TOP_ABS)/bin-manifest-$(ProjectVersion) )
 371
 372 PUBLISH_FILES = $(BIN_DIST_TARBALL)
 373
 374 # Upload the distribution and documentation
 375 ifneq "$(ISCC)" ""
 376 WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-$(TARGETPLATFORM)
 377 WINDOWS_INSTALLER = $(WINDOWS_INSTALLER_BASE)$(exeext)
 378
 379 PUBLISH_FILES += $(WINDOWS_INSTALLER)
 380
 381 binary-dist :: generate-windows-installer
 382
 383 .PHONY: generate-windows-installer
 384 generate-windows-installer ::
 385         $(SED) "s/@VERSION@/$(ProjectVersion)/" distrib/ghc.iss | $(ISCC) /O. /F$(WINDOWS_INSTALLER_BASE) -
 386 endif
 387
 388 # Upload the distribution and documentation
 389 ifneq "$(PublishLocation)" ""
 390 publish ::
 391         make publish-binary-dist 'prefix=$(BIN_DIST_INST_DIR)'
 392 endif
 393
 394 nTimes = set -e; for i in `seq 1 $(1)`; do echo Try "$$i: $(2)"; if $(2); then break; fi; done
 395
 396 .PHONY: publish-binary-dist
 397 publish-binary-dist ::
 398         @for f in $(PUBLISH_FILES); \
 399             do $(call nTimes,10,$(PublishCp) $$f $(PublishLocation)/dist); \
 400         done
 401
 402 # You need to "make binddisttest" before publishing the docs, as it
 403 # works by publish setting $(prefix) to inside the binddisttest
 404 # directory so $(docdir) points to the right place.
 405
 406 # We assume that Windows means Cygwin, as we can't just use docdir
 407 # unchanged or rsync (really SSH?) thinks that c:/foo means /foo on
 408 # the machine c.
 409
 410 ifeq "$(Windows)" "YES"
 411 PUBLISH_DOCDIR = $(shell cygpath --unix $(docdir))
 412 else
 413 PUBLISH_DOCDIR = $(docdir)
 414 endif
 415
 416 publish-binary-dist ::
 417         $(call nTimes,10,$(PublishCp) -r "$(PUBLISH_DOCDIR)"/* $(PublishLocation)/docs)
 418
 419 binary-dist::
 420         @echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"
 421
 422 # -----------------------------------------------------------------------------
 423 # Building MacOS installer packages
 424 #
 425 # 'framework-pkg'
 426 #       Create an installer package for /Library/Frameworks/GHC.framework
 427 #
 428 # 'framework-binary-dist'
 429 #       Create an installer package for GHC.framework encapsulating a
 430 #       binary-dist to make it relocatable
 431 #       FIXME: This is only partially implemented so far
 432
 433 ifeq "$(darwin_TARGET_OS)" "1"
 434
 435 .PHONY: framework-pkg, framework-binary-dist
 436
 437 framework-pkg:
 438         $(MAKE) -C distrib/MacOS framework-pkg
 439
 440 framework-binary-dist:
 441         $(MAKE) -C distrib/MacOS framework-binary-dist
 442
 443 endif
 444
 445 # -----------------------------------------------------------------------------
 446 # Building source distributions
 447 #
 448 # Do it like this:
 449 #
 450 #       $ make
 451 #       $ make dist
 452 #
 453 # WARNING: `make dist' calls `make distclean' before tarring up the tree.
 454 #
 455
 456 .PHONY: dist
 457
 458 #
 459 # Directory in which we're going to build the src dist
 460 #
 461 SRC_DIST_NAME=ghc-$(ProjectVersion)
 462 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
 463
 464 #
 465 # Files to include in source distributions
 466 #
 467 SRC_DIST_DIRS += mk docs distrib bindisttest $(filter-out docs distrib libraries/Cabal/doc,$(SUBDIRS))
 468 SRC_DIST_FILES += \
 469         configure.ac config.guess config.sub configure \
 470         aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
 471         ghc.spec.in ghc.spec extra-gcc-opts.in VERSION boot
 472
 473 # -----------------------------------------------------------------------------
 474 # Source distributions
 475
 476 # A source dist is built from a complete build tree, because we
 477 # require some extra files not contained in a darcs checkout: the
 478 # output from Happy and Alex, for example.
 479 #
 480 # The steps performed by 'make dist' are as follows:
 481 #   - create a complete link-tree of the current build tree in /tmp
 482 #   - run 'make distclean' on that tree
 483 #   - remove a bunch of other files that we know shouldn't be in the dist
 484 #   - tar up first the extralibs package, then the main source package
 485
 486 EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/libraries/%, $(shell cat libraries/extra-packages))
 487
 488 SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2
 489 SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2
 490
 491 VERSION :
 492         echo $(ProjectVersion) >VERSION
 493
 494 dist :: VERSION
 495
 496 dist ::
 497         $(RM) -rf $(SRC_DIST_DIR)
 498         $(RM) $(SRC_DIST_NAME).tar.gz
 499         mkdir $(SRC_DIST_DIR)
 500         ( cd $(SRC_DIST_DIR) \
 501           && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \
 502           && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \
 503           && $(MAKE) distclean \
 504           && if test -f $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs; then $(CP) $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs libraries/haskell-src/Language/Haskell/ ; mv libraries/haskell-src/Language/Haskell/Parser.ly libraries/haskell-src/Language/Haskell/Parser.ly.source ; fi \
 505           && $(RM) -rf compiler/stage[123] mk/build.mk \
 506           && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \
 507         )
 508         tar chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL)
 509         $(RM) -rf $(EXTRA_LIBS)
 510         tar chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL)
 511
 512 # Upload the distribution(s)
 513 # Retrying is to work around buggy firewalls that corrupt large file transfers
 514 # over SSH.
 515 ifneq "$(PublishLocation)" ""
 516 dist ::
 517         @for i in 0 1 2 3 4 5 6 7 8 9; do \
 518                 echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist"; \
 519                 if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist; then break; fi\
 520         done
 521         @for i in 0 1 2 3 4 5 6 7 8 9; do \
 522                 echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist"; \
 523                 if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist; then break; fi\
 524         done
 525 endif
 526
 527 # -----------------------------------------------------------------------------
 528 # HC file bundles
 529
 530 hc-file-bundle :
 531         $(RM) -r ghc-$(ProjectVersion)
 532         $(LN_S) . ghc-$(ProjectVersion)
 533         $(FIND) ghc-$(ProjectVersion)/compiler \
 534              ghc-$(ProjectVersion)/utils \
 535              ghc-$(ProjectVersion)/libraries -follow \
 536           \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go
 537         for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \
 538              if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \
 539                 echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \
 540              fi; \
 541         done;
 542         for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \
 543              if test "x$$f" != "x"; then \
 544                 echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \
 545              fi; \
 546         done;
 547         echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go
 548         echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go
 549         echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go
 550         echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go
 551         echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
 552         tar czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go`
 553
 554 # -----------------------------------------------------------------------------
 555 # Cleaning
 556
 557 CLEAN_FILES += hc-files-to-go *-hc.tar.gz
 558
 559 DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \
 560         docs/users_guide/ug-book.xml extra-gcc-opts
 561
 562 # don't clean config.mk: it's needed when cleaning stuff later on
 563 LATE_DIST_CLEAN_FILES += mk/config.mk
 564
 565 # VERSION is shipped in a source dist
 566 MAINTAINER_CLEAN_FILES += VERSION
 567
 568 extraclean::
 569         $(RM) -rf autom4te.cache
 570
 571 clean distclean ::
 572         $(MAKE) -C bindisttest $@
 573         if test -d testsuite; then $(MAKE) -C testsuite $@; fi
 574
 575 # -----------------------------------------------------------------------------
 576
 577 # Turn off target.mk's rules for 'all', 'boot' and 'install'.
 578 NO_BOOT_TARGET=YES
 579 NO_ALL_TARGET=YES
 580 NO_INSTALL_TARGET=YES
 581
 582 include $(TOP)/mk/target.mk
 583
 584 # -----------------------------------------------------------------------------
 585