Substantial improvement to the interaction of RULES and inlining

[ghc-hetmet.git] / compiler / simplCore / Simplify.lhs

%
% (c) The AQUA Project, Glasgow University, 1993-1998
%
\section[Simplify]{The main module of the simplifier}

\begin{code}
{-# OPTIONS -w #-}
-- The above warning supression flag is a temporary kludge.
-- While working on this module you are encouraged to remove it and fix
-- any warnings in the module. See
--     http://hackage.haskell.org/trac/ghc/wiki/Commentary/CodingStyle#Warnings
-- for details

module Simplify ( simplTopBinds, simplExpr ) where

#include "HsVersions.h"

import DynFlags
import SimplMonad
import Type hiding      ( substTy, extendTvSubst )
import SimplEnv 
import SimplUtils
import Id
import Var
import IdInfo
import Coercion
import FamInstEnv       ( topNormaliseType )
import DataCon          ( dataConRepStrictness, dataConUnivTyVars )
import CoreSyn
import NewDemand        ( isStrictDmd )
import PprCore          ( pprParendExpr, pprCoreExpr )
import CoreUnfold       ( mkUnfolding, callSiteInline )
import CoreUtils
import Rules            ( lookupRule )
import BasicTypes       ( isMarkedStrict )
import CostCentre       ( currentCCS )
import TysPrim          ( realWorldStatePrimTy )
import PrelInfo         ( realWorldPrimId )
import BasicTypes       ( TopLevelFlag(..), isTopLevel, 
                          RecFlag(..), isNonRuleLoopBreaker )
import Maybes           ( orElse )
import Data.List        ( mapAccumL )
import Outputable
import Util
\end{code}


The guts of the simplifier is in this module, but the driver loop for
the simplifier is in SimplCore.lhs.


-----------------------------------------
        *** IMPORTANT NOTE ***
-----------------------------------------
The simplifier used to guarantee that the output had no shadowing, but
it does not do so any more.   (Actually, it never did!)  The reason is
documented with simplifyArgs.


-----------------------------------------
        *** IMPORTANT NOTE ***
-----------------------------------------
Many parts of the simplifier return a bunch of "floats" as well as an
expression. This is wrapped as a datatype SimplUtils.FloatsWith.

All "floats" are let-binds, not case-binds, but some non-rec lets may
be unlifted (with RHS ok-for-speculation).



-----------------------------------------
        ORGANISATION OF FUNCTIONS
-----------------------------------------
simplTopBinds
  - simplify all top-level binders
  - for NonRec, call simplRecOrTopPair
  - for Rec,    call simplRecBind

        
        ------------------------------
simplExpr (applied lambda)      ==> simplNonRecBind
simplExpr (Let (NonRec ...) ..) ==> simplNonRecBind
simplExpr (Let (Rec ...)    ..) ==> simplify binders; simplRecBind

        ------------------------------
simplRecBind    [binders already simplfied]
  - use simplRecOrTopPair on each pair in turn

simplRecOrTopPair [binder already simplified]
  Used for: recursive bindings (top level and nested)
            top-level non-recursive bindings
  Returns: 
  - check for PreInlineUnconditionally
  - simplLazyBind

simplNonRecBind
  Used for: non-top-level non-recursive bindings
            beta reductions (which amount to the same thing)
  Because it can deal with strict arts, it takes a 
        "thing-inside" and returns an expression

  - check for PreInlineUnconditionally
  - simplify binder, including its IdInfo
  - if strict binding
        simplStrictArg
        mkAtomicArgs
        completeNonRecX
    else
        simplLazyBind
        addFloats

simplNonRecX:   [given a *simplified* RHS, but an *unsimplified* binder]
  Used for: binding case-binder and constr args in a known-constructor case
  - check for PreInLineUnconditionally
  - simplify binder
  - completeNonRecX
 
        ------------------------------
simplLazyBind:  [binder already simplified, RHS not]
  Used for: recursive bindings (top level and nested)
            top-level non-recursive bindings
            non-top-level, but *lazy* non-recursive bindings
        [must not be strict or unboxed]
  Returns floats + an augmented environment, not an expression
  - substituteIdInfo and add result to in-scope 
        [so that rules are available in rec rhs]
  - simplify rhs
  - mkAtomicArgs
  - float if exposes constructor or PAP
  - completeBind


completeNonRecX:        [binder and rhs both simplified]
  - if the the thing needs case binding (unlifted and not ok-for-spec)
        build a Case
   else
        completeBind
        addFloats

completeBind:   [given a simplified RHS]
        [used for both rec and non-rec bindings, top level and not]
  - try PostInlineUnconditionally
  - add unfolding [this is the only place we add an unfolding]
  - add arity



Right hand sides and arguments
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In many ways we want to treat 
        (a) the right hand side of a let(rec), and 
        (b) a function argument
in the same way.  But not always!  In particular, we would
like to leave these arguments exactly as they are, so they
will match a RULE more easily.
        
        f (g x, h x)    
        g (+ x)

It's harder to make the rule match if we ANF-ise the constructor,
or eta-expand the PAP:

        f (let { a = g x; b = h x } in (a,b))
        g (\y. + x y)

On the other hand if we see the let-defns

        p = (g x, h x)
        q = + x

then we *do* want to ANF-ise and eta-expand, so that p and q
can be safely inlined.   

Even floating lets out is a bit dubious.  For let RHS's we float lets
out if that exposes a value, so that the value can be inlined more vigorously.
For example

        r = let x = e in (x,x)

Here, if we float the let out we'll expose a nice constructor. We did experiments
that showed this to be a generally good thing.  But it was a bad thing to float
lets out unconditionally, because that meant they got allocated more often.

For function arguments, there's less reason to expose a constructor (it won't
get inlined).  Just possibly it might make a rule match, but I'm pretty skeptical.
So for the moment we don't float lets out of function arguments either.


Eta expansion
~~~~~~~~~~~~~~
For eta expansion, we want to catch things like

        case e of (a,b) -> \x -> case a of (p,q) -> \y -> r

If the \x was on the RHS of a let, we'd eta expand to bring the two
lambdas together.  And in general that's a good thing to do.  Perhaps
we should eta expand wherever we find a (value) lambda?  Then the eta
expansion at a let RHS can concentrate solely on the PAP case.


%************************************************************************
%*                                                                      *
\subsection{Bindings}
%*                                                                      *
%************************************************************************

\begin{code}
simplTopBinds :: SimplEnv -> [InBind] -> SimplM [OutBind]

simplTopBinds env binds
  = do  {       -- Put all the top-level binders into scope at the start
                -- so that if a transformation rule has unexpectedly brought
                -- anything into scope, then we don't get a complaint about that.
                -- It's rather as if the top-level binders were imported.
        ; env <- simplRecBndrs env (bindersOfBinds binds)
        ; dflags <- getDOptsSmpl
        ; let dump_flag = dopt Opt_D_dump_inlinings dflags || 
                          dopt Opt_D_dump_rule_firings dflags
        ; env' <- simpl_binds dump_flag env binds
        ; freeTick SimplifierDone
        ; return (getFloats env') }
  where
        -- We need to track the zapped top-level binders, because
        -- they should have their fragile IdInfo zapped (notably occurrence info)
        -- That's why we run down binds and bndrs' simultaneously.
        --
        -- The dump-flag emits a trace for each top-level binding, which
        -- helps to locate the tracing for inlining and rule firing
    simpl_binds :: Bool -> SimplEnv -> [InBind] -> SimplM SimplEnv
    simpl_binds dump env []           = return env
    simpl_binds dump env (bind:binds) = do { env' <- trace dump bind $
                                                     simpl_bind env bind
                                           ; simpl_binds dump env' binds }

    trace True  bind = pprTrace "SimplBind" (ppr (bindersOf bind))
    trace False bind = \x -> x

    simpl_bind env (Rec pairs)  = simplRecBind      env  TopLevel pairs
    simpl_bind env (NonRec b r) = simplRecOrTopPair env' TopLevel b b' r
        where
          (env', b') = addLetIdInfo env b (lookupRecBndr env b)
\end{code}


%************************************************************************
%*                                                                      *
\subsection{Lazy bindings}
%*                                                                      *
%************************************************************************

simplRecBind is used for
        * recursive bindings only

\begin{code}
simplRecBind :: SimplEnv -> TopLevelFlag
             -> [(InId, InExpr)]
             -> SimplM SimplEnv
simplRecBind env top_lvl pairs
  = do  { let (env_with_info, triples) = mapAccumL add_info env pairs
        ; env' <- go (zapFloats env_with_info) triples
        ; return (env `addRecFloats` env') }
        -- addFloats adds the floats from env', 
        -- *and* updates env with the in-scope set from env'
  where
    add_info :: SimplEnv -> (InBndr,InExpr) -> (SimplEnv, (InBndr, OutBndr, InExpr))
        -- Substitute in IdInfo, agument envt
    add_info env (bndr, rhs) = (env, (bndr, bndr', rhs))
        where
          (env', bndr') = addLetIdInfo env bndr (lookupRecBndr env bndr)

    go env [] = return env
        
    go env ((old_bndr, new_bndr, rhs) : pairs)
        = do { env <- simplRecOrTopPair env top_lvl old_bndr new_bndr rhs
             ; go env pairs }
\end{code}

simplOrTopPair is used for
        * recursive bindings (whether top level or not)
        * top-level non-recursive bindings

It assumes the binder has already been simplified, but not its IdInfo.

\begin{code}
simplRecOrTopPair :: SimplEnv
                  -> TopLevelFlag
                  -> InId -> OutBndr -> InExpr  -- Binder and rhs
                  -> SimplM SimplEnv    -- Returns an env that includes the binding

simplRecOrTopPair env top_lvl old_bndr new_bndr rhs
  | preInlineUnconditionally env top_lvl old_bndr rhs   -- Check for unconditional inline
  = do  { tick (PreInlineUnconditionally old_bndr)
        ; return (extendIdSubst env old_bndr (mkContEx env rhs)) }

  | otherwise
  = simplLazyBind env top_lvl Recursive old_bndr new_bndr rhs env 
        -- May not actually be recursive, but it doesn't matter
\end{code}


simplLazyBind is used for
  * [simplRecOrTopPair] recursive bindings (whether top level or not)
  * [simplRecOrTopPair] top-level non-recursive bindings
  * [simplNonRecE]      non-top-level *lazy* non-recursive bindings

Nota bene:
    1. It assumes that the binder is *already* simplified, 
       and is in scope, and its IdInfo too, except unfolding

    2. It assumes that the binder type is lifted.

    3. It does not check for pre-inline-unconditionallly;
       that should have been done already.

\begin{code}
simplLazyBind :: SimplEnv
              -> TopLevelFlag -> RecFlag
              -> InId -> OutId          -- Binder, both pre-and post simpl
                                        -- The OutId has IdInfo, except arity, unfolding
              -> InExpr -> SimplEnv     -- The RHS and its environment
              -> SimplM SimplEnv

simplLazyBind env top_lvl is_rec bndr bndr1 rhs rhs_se
  = do  { let   rhs_env     = rhs_se `setInScope` env
                (tvs, body) = collectTyBinders rhs
        ; (body_env, tvs') <- simplBinders rhs_env tvs
                -- See Note [Floating and type abstraction]
                -- in SimplUtils

        -- Simplify the RHS; note the mkRhsStop, which tells 
        -- the simplifier that this is the RHS of a let.
        ; let rhs_cont = mkRhsStop (applyTys (idType bndr1) (mkTyVarTys tvs'))
        ; (body_env1, body1) <- simplExprF body_env body rhs_cont

        -- ANF-ise a constructor or PAP rhs
        ; (body_env2, body2) <- prepareRhs body_env1 body1

        ; (env', rhs')
            <-  if not (doFloatFromRhs top_lvl is_rec False body2 body_env2)
                then                            -- No floating, just wrap up!
                     do { rhs' <- mkLam tvs' (wrapFloats body_env2 body2)
                        ; return (env, rhs') }

                else if null tvs then           -- Simple floating
                     do { tick LetFloatFromLet
                        ; return (addFloats env body_env2, body2) }

                else                            -- Do type-abstraction first
                     do { tick LetFloatFromLet
                        ; (poly_binds, body3) <- abstractFloats tvs' body_env2 body2
                        ; rhs' <- mkLam tvs' body3
                        ; return (extendFloats env poly_binds, rhs') }

        ; completeBind env' top_lvl bndr bndr1 rhs' }
\end{code}

A specialised variant of simplNonRec used when the RHS is already simplified, 
notably in knownCon.  It uses case-binding where necessary.

\begin{code}
simplNonRecX :: SimplEnv
             -> InId            -- Old binder
             -> OutExpr         -- Simplified RHS
             -> SimplM SimplEnv

simplNonRecX env bndr new_rhs
  = do  { (env, bndr') <- simplBinder env bndr
        ; completeNonRecX env NotTopLevel NonRecursive
                          (isStrictId bndr) bndr bndr' new_rhs }

completeNonRecX :: SimplEnv
                -> TopLevelFlag -> RecFlag -> Bool
                -> InId                 -- Old binder
                -> OutId                -- New binder
                -> OutExpr              -- Simplified RHS
                -> SimplM SimplEnv

completeNonRecX env top_lvl is_rec is_strict old_bndr new_bndr new_rhs
  = do  { (env1, rhs1) <- prepareRhs (zapFloats env) new_rhs
        ; (env2, rhs2) <- 
                if doFloatFromRhs top_lvl is_rec is_strict rhs1 env1
                then do { tick LetFloatFromLet
                        ; return (addFloats env env1, rhs1) }   -- Add the floats to the main env
                else return (env, wrapFloats env1 rhs1)         -- Wrap the floats around the RHS
        ; completeBind env2 NotTopLevel old_bndr new_bndr rhs2 }
\end{code}

{- No, no, no!  Do not try preInlineUnconditionally in completeNonRecX
   Doing so risks exponential behaviour, because new_rhs has been simplified once already
   In the cases described by the folowing commment, postInlineUnconditionally will 
   catch many of the relevant cases.
        -- This happens; for example, the case_bndr during case of
        -- known constructor:  case (a,b) of x { (p,q) -> ... }
        -- Here x isn't mentioned in the RHS, so we don't want to
        -- create the (dead) let-binding  let x = (a,b) in ...
        --
        -- Similarly, single occurrences can be inlined vigourously
        -- e.g.  case (f x, g y) of (a,b) -> ....
        -- If a,b occur once we can avoid constructing the let binding for them.

   Furthermore in the case-binding case preInlineUnconditionally risks extra thunks
        -- Consider     case I# (quotInt# x y) of 
        --                I# v -> let w = J# v in ...
        -- If we gaily inline (quotInt# x y) for v, we end up building an
        -- extra thunk:
        --                let w = J# (quotInt# x y) in ...
        -- because quotInt# can fail.

  | preInlineUnconditionally env NotTopLevel bndr new_rhs
  = thing_inside (extendIdSubst env bndr (DoneEx new_rhs))
-}

----------------------------------
prepareRhs takes a putative RHS, checks whether it's a PAP or
constructor application and, if so, converts it to ANF, so that the 
resulting thing can be inlined more easily.  Thus
        x = (f a, g b)
becomes
        t1 = f a
        t2 = g b
        x = (t1,t2)

We also want to deal well cases like this
        v = (f e1 `cast` co) e2
Here we want to make e1,e2 trivial and get
        x1 = e1; x2 = e2; v = (f x1 `cast` co) v2
That's what the 'go' loop in prepareRhs does

\begin{code}
prepareRhs :: SimplEnv -> OutExpr -> SimplM (SimplEnv, OutExpr)
-- Adds new floats to the env iff that allows us to return a good RHS
prepareRhs env (Cast rhs co)    -- Note [Float coercions]
  | (ty1, ty2) <- coercionKind co       -- Do *not* do this if rhs has an unlifted type
  , not (isUnLiftedType ty1)            -- see Note [Float coercions (unlifted)]
  = do  { (env', rhs') <- makeTrivial env rhs
        ; return (env', Cast rhs' co) }

prepareRhs env rhs
  = do  { (is_val, env', rhs') <- go 0 env rhs 
        ; return (env', rhs') }
  where
    go n_val_args env (Cast rhs co)
        = do { (is_val, env', rhs') <- go n_val_args env rhs
             ; return (is_val, env', Cast rhs' co) }
    go n_val_args env (App fun (Type ty))
        = do { (is_val, env', rhs') <- go n_val_args env fun
             ; return (is_val, env', App rhs' (Type ty)) }
    go n_val_args env (App fun arg)
        = do { (is_val, env', fun') <- go (n_val_args+1) env fun
             ; case is_val of
                True -> do { (env'', arg') <- makeTrivial env' arg
                           ; return (True, env'', App fun' arg') }
                False -> return (False, env, App fun arg) }
    go n_val_args env (Var fun)
        = return (is_val, env, Var fun)
        where
          is_val = n_val_args > 0       -- There is at least one arg
                                        -- ...and the fun a constructor or PAP
                 && (isDataConWorkId fun || n_val_args < idArity fun)
    go n_val_args env other
        = return (False, env, other)
\end{code}


Note [Float coercions]
~~~~~~~~~~~~~~~~~~~~~~
When we find the binding
        x = e `cast` co
we'd like to transform it to
        x' = e
        x = x `cast` co         -- A trivial binding
There's a chance that e will be a constructor application or function, or something
like that, so moving the coerion to the usage site may well cancel the coersions
and lead to further optimisation.  Example:

     data family T a :: *
     data instance T Int = T Int

     foo :: Int -> Int -> Int
     foo m n = ...
        where
          x = T m
          go 0 = 0
          go n = case x of { T m -> go (n-m) }
                -- This case should optimise

Note [Float coercions (unlifted)]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
BUT don't do [Float coercions] if 'e' has an unlifted type. 
This *can* happen:

     foo :: Int = (error (# Int,Int #) "urk") 
                  `cast` CoUnsafe (# Int,Int #) Int

If do the makeTrivial thing to the error call, we'll get
    foo = case error (# Int,Int #) "urk" of v -> v `cast` ...
But 'v' isn't in scope!  

These strange casts can happen as a result of case-of-case
        bar = case (case x of { T -> (# 2,3 #); F -> error "urk" }) of
                (# p,q #) -> p+q


\begin{code}
makeTrivial :: SimplEnv -> OutExpr -> SimplM (SimplEnv, OutExpr)
-- Binds the expression to a variable, if it's not trivial, returning the variable
makeTrivial env expr
  | exprIsTrivial expr
  = return (env, expr)
  | otherwise           -- See Note [Take care] below
  = do  { var <- newId FSLIT("a") (exprType expr)
        ; env <- completeNonRecX env NotTopLevel NonRecursive 
                                 False var var expr
        ; return (env, substExpr env (Var var)) }
\end{code}


%************************************************************************
%*                                                                      *
\subsection{Completing a lazy binding}
%*                                                                      *
%************************************************************************

completeBind
  * deals only with Ids, not TyVars
  * takes an already-simplified binder and RHS
  * is used for both recursive and non-recursive bindings
  * is used for both top-level and non-top-level bindings

It does the following:
  - tries discarding a dead binding
  - tries PostInlineUnconditionally
  - add unfolding [this is the only place we add an unfolding]
  - add arity

It does *not* attempt to do let-to-case.  Why?  Because it is used for
  - top-level bindings (when let-to-case is impossible) 
  - many situations where the "rhs" is known to be a WHNF
                (so let-to-case is inappropriate).

Nor does it do the atomic-argument thing

\begin{code}
completeBind :: SimplEnv
             -> TopLevelFlag            -- Flag stuck into unfolding
             -> InId                    -- Old binder
             -> OutId -> OutExpr        -- New binder and RHS
             -> SimplM SimplEnv
-- completeBind may choose to do its work 
--      * by extending the substitution (e.g. let x = y in ...)
--      * or by adding to the floats in the envt

completeBind env top_lvl old_bndr new_bndr new_rhs
  | postInlineUnconditionally env top_lvl new_bndr occ_info new_rhs unfolding
                -- Inline and discard the binding
  = do  { tick (PostInlineUnconditionally old_bndr)
        ; -- pprTrace "postInlineUnconditionally" (ppr old_bndr <+> ppr new_bndr <+> ppr new_rhs) $
          return (extendIdSubst env old_bndr (DoneEx new_rhs)) }
        -- Use the substitution to make quite, quite sure that the
        -- substitution will happen, since we are going to discard the binding

  |  otherwise
  = let
        --      Arity info
        new_bndr_info = idInfo new_bndr `setArityInfo` exprArity new_rhs

        --      Unfolding info
        -- Add the unfolding *only* for non-loop-breakers
        -- Making loop breakers not have an unfolding at all 
        -- means that we can avoid tests in exprIsConApp, for example.
        -- This is important: if exprIsConApp says 'yes' for a recursive
        -- thing, then we can get into an infinite loop

        --      Demand info
        -- If the unfolding is a value, the demand info may
        -- go pear-shaped, so we nuke it.  Example:
        --      let x = (a,b) in
        --      case x of (p,q) -> h p q x
        -- Here x is certainly demanded. But after we've nuked
        -- the case, we'll get just
        --      let x = (a,b) in h a b x
        -- and now x is not demanded (I'm assuming h is lazy)
        -- This really happens.  Similarly
        --      let f = \x -> e in ...f..f...
        -- After inlining f at some of its call sites the original binding may
        -- (for example) be no longer strictly demanded.
        -- The solution here is a bit ad hoc...
        info_w_unf = new_bndr_info `setUnfoldingInfo` unfolding
        final_info | loop_breaker               = new_bndr_info
                   | isEvaldUnfolding unfolding = zapDemandInfo info_w_unf `orElse` info_w_unf
                   | otherwise                  = info_w_unf

        final_id = new_bndr `setIdInfo` final_info
    in
                -- These seqs forces the Id, and hence its IdInfo,
                -- and hence any inner substitutions
    final_id                                    `seq`
    -- pprTrace "Binding" (ppr final_id <+> ppr unfolding) $
    return (addNonRec env final_id new_rhs)
  where 
    unfolding    = mkUnfolding (isTopLevel top_lvl) new_rhs
    loop_breaker = isNonRuleLoopBreaker occ_info
    old_info     = idInfo old_bndr
    occ_info     = occInfo old_info
\end{code}



%************************************************************************
%*                                                                      *
\subsection[Simplify-simplExpr]{The main function: simplExpr}
%*                                                                      *
%************************************************************************

The reason for this OutExprStuff stuff is that we want to float *after*
simplifying a RHS, not before.  If we do so naively we get quadratic
behaviour as things float out.

To see why it's important to do it after, consider this (real) example:

        let t = f x
        in fst t
==>
        let t = let a = e1
                    b = e2
                in (a,b)
        in fst t
==>
        let a = e1
            b = e2
            t = (a,b)
        in
        a       -- Can't inline a this round, cos it appears twice
==>
        e1

Each of the ==> steps is a round of simplification.  We'd save a
whole round if we float first.  This can cascade.  Consider

        let f = g d
        in \x -> ...f...
==>
        let f = let d1 = ..d.. in \y -> e
        in \x -> ...f...
==>
        let d1 = ..d..
        in \x -> ...(\y ->e)...

Only in this second round can the \y be applied, and it 
might do the same again.


\begin{code}
simplExpr :: SimplEnv -> CoreExpr -> SimplM CoreExpr
simplExpr env expr = simplExprC env expr (mkBoringStop expr_ty')
                   where
                     expr_ty' = substTy env (exprType expr)
        -- The type in the Stop continuation, expr_ty', is usually not used
        -- It's only needed when discarding continuations after finding
        -- a function that returns bottom.
        -- Hence the lazy substitution


simplExprC :: SimplEnv -> CoreExpr -> SimplCont -> SimplM CoreExpr
        -- Simplify an expression, given a continuation
simplExprC env expr cont 
  = -- pprTrace "simplExprC" (ppr expr $$ ppr cont {- $$ ppr (seIdSubst env) -} $$ ppr (seFloats env) ) $
    do  { (env', expr') <- simplExprF (zapFloats env) expr cont
        ; -- pprTrace "simplExprC ret" (ppr expr $$ ppr expr') $
          -- pprTrace "simplExprC ret3" (ppr (seInScope env')) $
          -- pprTrace "simplExprC ret4" (ppr (seFloats env')) $
          return (wrapFloats env' expr') }

--------------------------------------------------
simplExprF :: SimplEnv -> InExpr -> SimplCont
           -> SimplM (SimplEnv, OutExpr)

simplExprF env e cont 
  = -- pprTrace "simplExprF" (ppr e $$ ppr cont $$ ppr (seTvSubst env) $$ ppr (seIdSubst env) {- $$ ppr (seFloats env) -} ) $
    simplExprF' env e cont
                                     
simplExprF' env (Var v)        cont = simplVar env v cont
simplExprF' env (Lit lit)      cont = rebuild env (Lit lit) cont
simplExprF' env (Note n expr)  cont = simplNote env n expr cont
simplExprF' env (Cast body co) cont = simplCast env body co cont
simplExprF' env (App fun arg)  cont = simplExprF env fun $
                                      ApplyTo NoDup arg env cont

simplExprF' env expr@(Lam _ _) cont 
  = simplLam env (map zap bndrs) body cont
        -- The main issue here is under-saturated lambdas
        --   (\x1. \x2. e) arg1
        -- Here x1 might have "occurs-once" occ-info, because occ-info
        -- is computed assuming that a group of lambdas is applied
        -- all at once.  If there are too few args, we must zap the 
        -- occ-info.
  where
    n_args   = countArgs cont
    n_params = length bndrs
    (bndrs, body) = collectBinders expr
    zap | n_args >= n_params = \b -> b  
        | otherwise          = \b -> if isTyVar b then b
                                     else zapLamIdInfo b
        -- NB: we count all the args incl type args
        -- so we must count all the binders (incl type lambdas)

simplExprF' env (Type ty) cont
  = ASSERT( contIsRhsOrArg cont )
    do  { ty' <- simplType env ty
        ; rebuild env (Type ty') cont }

simplExprF' env (Case scrut bndr case_ty alts) cont
  | not (switchIsOn (getSwitchChecker env) NoCaseOfCase)
  =     -- Simplify the scrutinee with a Select continuation
    simplExprF env scrut (Select NoDup bndr alts env cont)

  | otherwise
  =     -- If case-of-case is off, simply simplify the case expression
        -- in a vanilla Stop context, and rebuild the result around it
    do  { case_expr' <- simplExprC env scrut case_cont
        ; rebuild env case_expr' cont }
  where
    case_cont = Select NoDup bndr alts env (mkBoringStop case_ty')
    case_ty'  = substTy env case_ty     -- c.f. defn of simplExpr

simplExprF' env (Let (Rec pairs) body) cont
  = do  { env <- simplRecBndrs env (map fst pairs)
                -- NB: bndrs' don't have unfoldings or rules
                -- We add them as we go down

        ; env <- simplRecBind env NotTopLevel pairs
        ; simplExprF env body cont }

simplExprF' env (Let (NonRec bndr rhs) body) cont
  = simplNonRecE env bndr (rhs, env) ([], body) cont

---------------------------------
simplType :: SimplEnv -> InType -> SimplM OutType
        -- Kept monadic just so we can do the seqType
simplType env ty
  = -- pprTrace "simplType" (ppr ty $$ ppr (seTvSubst env)) $
    seqType new_ty   `seq`   returnSmpl new_ty
  where
    new_ty = substTy env ty
\end{code}


%************************************************************************
%*                                                                      *
\subsection{The main rebuilder}
%*                                                                      *
%************************************************************************

\begin{code}
rebuild :: SimplEnv -> OutExpr -> SimplCont -> SimplM (SimplEnv, OutExpr)
-- At this point the substitution in the SimplEnv should be irrelevant
-- only the in-scope set and floats should matter
rebuild env expr cont
  = -- pprTrace "rebuild" (ppr expr $$ ppr cont $$ ppr (seFloats env)) $
    case cont of
      Stop {}                      -> return (env, expr)
      CoerceIt co cont             -> rebuild env (mkCoerce co expr) cont
      Select _ bndr alts se cont   -> rebuildCase (se `setFloats` env) expr bndr alts cont
      StrictArg fun ty info cont   -> rebuildCall env (fun `App` expr) (funResultTy ty) info cont
      StrictBind b bs body se cont -> do { env' <- simplNonRecX (se `setFloats` env) b expr
                                         ; simplLam env' bs body cont }
      ApplyTo _ arg se cont        -> do { arg' <- simplExpr (se `setInScope` env) arg
                                         ; rebuild env (App expr arg') cont }
\end{code}


%************************************************************************
%*                                                                      *
\subsection{Lambdas}
%*                                                                      *
%************************************************************************

\begin{code}
simplCast :: SimplEnv -> InExpr -> Coercion -> SimplCont
          -> SimplM (SimplEnv, OutExpr)
simplCast env body co cont
  = do  { co' <- simplType env co
        ; simplExprF env body (addCoerce co' cont) }
  where
       addCoerce co cont = add_coerce co (coercionKind co) cont

       add_coerce co (s1, k1) cont      -- co :: ty~ty
         | s1 `coreEqType` k1 = cont    -- is a no-op

       add_coerce co1 (s1, k2) (CoerceIt co2 cont)
         | (l1, t1) <- coercionKind co2
                --      coerce T1 S1 (coerce S1 K1 e)
                -- ==>
                --      e,                      if T1=K1
                --      coerce T1 K1 e,         otherwise
                --
                -- For example, in the initial form of a worker
                -- we may find  (coerce T (coerce S (\x.e))) y
                -- and we'd like it to simplify to e[y/x] in one round 
                -- of simplification
         , s1 `coreEqType` t1  = cont            -- The coerces cancel out  
         | otherwise           = CoerceIt (mkTransCoercion co1 co2) cont
    
       add_coerce co (s1s2, t1t2) (ApplyTo dup (Type arg_ty) arg_se cont)
                -- (f `cast` g) ty  --->   (f ty) `cast` (g @ ty)
                -- This implements the PushT rule from the paper
         | Just (tyvar,_) <- splitForAllTy_maybe s1s2
         , not (isCoVar tyvar)
         = ApplyTo dup (Type ty') (zapSubstEnv env) (addCoerce (mkInstCoercion co ty') cont)
         where
           ty' = substTy arg_se arg_ty

        -- ToDo: the PushC rule is not implemented at all

       add_coerce co (s1s2, t1t2) (ApplyTo dup arg arg_se cont)
         | not (isTypeArg arg)  -- This implements the Push rule from the paper
         , isFunTy s1s2   -- t1t2 must be a function type, becuase it's applied
                -- co : s1s2 :=: t1t2
                --      (coerce (T1->T2) (S1->S2) F) E
                -- ===> 
                --      coerce T2 S2 (F (coerce S1 T1 E))
                --
                -- t1t2 must be a function type, T1->T2, because it's applied
                -- to something but s1s2 might conceivably not be
                --
                -- When we build the ApplyTo we can't mix the out-types
                -- with the InExpr in the argument, so we simply substitute
                -- to make it all consistent.  It's a bit messy.
                -- But it isn't a common case.
                --
                -- Example of use: Trac #995
         = ApplyTo dup new_arg (zapSubstEnv env) (addCoerce co2 cont)
         where
           -- we split coercion t1->t2 :=: s1->s2 into t1 :=: s1 and 
           -- t2 :=: s2 with left and right on the curried form: 
           --    (->) t1 t2 :=: (->) s1 s2
           [co1, co2] = decomposeCo 2 co
           new_arg    = mkCoerce (mkSymCoercion co1) arg'
           arg'       = substExpr arg_se arg

       add_coerce co _ cont = CoerceIt co cont
\end{code}


%************************************************************************
%*                                                                      *
\subsection{Lambdas}
%*                                                                      *
%************************************************************************

\begin{code}
simplLam :: SimplEnv -> [InId] -> InExpr -> SimplCont
         -> SimplM (SimplEnv, OutExpr)

simplLam env [] body cont = simplExprF env body cont

        -- Type-beta reduction
simplLam env (bndr:bndrs) body (ApplyTo _ (Type ty_arg) arg_se cont)
  = ASSERT( isTyVar bndr )
    do  { tick (BetaReduction bndr)
        ; ty_arg' <- simplType (arg_se `setInScope` env) ty_arg
        ; simplLam (extendTvSubst env bndr ty_arg') bndrs body cont }

        -- Ordinary beta reduction
simplLam env (bndr:bndrs) body (ApplyTo _ arg arg_se cont)
  = do  { tick (BetaReduction bndr)     
        ; simplNonRecE env bndr (arg, arg_se) (bndrs, body) cont }

        -- Not enough args, so there are real lambdas left to put in the result
simplLam env bndrs body cont
  = do  { (env, bndrs') <- simplLamBndrs env bndrs
        ; body' <- simplExpr env body
        ; new_lam <- mkLam bndrs' body'
        ; rebuild env new_lam cont }

------------------
simplNonRecE :: SimplEnv 
             -> InId                    -- The binder
             -> (InExpr, SimplEnv)      -- Rhs of binding (or arg of lambda)
             -> ([InId], InExpr)        -- Body of the let/lambda
                                        --      \xs.e
             -> SimplCont
             -> SimplM (SimplEnv, OutExpr)

-- simplNonRecE is used for
--  * non-top-level non-recursive lets in expressions
--  * beta reduction
--
-- It deals with strict bindings, via the StrictBind continuation,
-- which may abort the whole process
--
-- The "body" of the binding comes as a pair of ([InId],InExpr)
-- representing a lambda; so we recurse back to simplLam
-- Why?  Because of the binder-occ-info-zapping done before 
--       the call to simplLam in simplExprF (Lam ...)

simplNonRecE env bndr (rhs, rhs_se) (bndrs, body) cont
  | preInlineUnconditionally env NotTopLevel bndr rhs
  = do  { tick (PreInlineUnconditionally bndr)
        ; simplLam (extendIdSubst env bndr (mkContEx rhs_se rhs)) bndrs body cont }

  | isStrictId bndr
  = do  { simplExprF (rhs_se `setFloats` env) rhs 
                     (StrictBind bndr bndrs body env cont) }

  | otherwise
  = do  { (env1, bndr1) <- simplNonRecBndr env bndr
        ; let (env2, bndr2) = addLetIdInfo env1 bndr bndr1
        ; env3 <- simplLazyBind env2 NotTopLevel NonRecursive bndr bndr2 rhs rhs_se
        ; simplLam env3 bndrs body cont }
\end{code}


%************************************************************************
%*                                                                      *
\subsection{Notes}
%*                                                                      *
%************************************************************************

\begin{code}
-- Hack alert: we only distinguish subsumed cost centre stacks for the 
-- purposes of inlining.  All other CCCSs are mapped to currentCCS.
simplNote env (SCC cc) e cont
  = do  { e' <- simplExpr (setEnclosingCC env currentCCS) e
        ; rebuild env (mkSCC cc e') cont }

-- See notes with SimplMonad.inlineMode
simplNote env InlineMe e cont
  | Just (inside, outside) <- splitInlineCont cont  -- Boring boring continuation; see notes above
  = do  {                       -- Don't inline inside an INLINE expression
          e' <- simplExprC (setMode inlineMode env) e inside
        ; rebuild env (mkInlineMe e') outside }

  | otherwise   -- Dissolve the InlineMe note if there's
                -- an interesting context of any kind to combine with
                -- (even a type application -- anything except Stop)
  = simplExprF env e cont

simplNote env (CoreNote s) e cont
  = simplExpr env e    `thenSmpl` \ e' ->
    rebuild env (Note (CoreNote s) e') cont
\end{code}


%************************************************************************
%*                                                                      *
\subsection{Dealing with calls}
%*                                                                      *
%************************************************************************

\begin{code}
simplVar env var cont
  = case substId env var of
        DoneEx e         -> simplExprF (zapSubstEnv env) e cont
        ContEx tvs ids e -> simplExprF (setSubstEnv env tvs ids) e cont
        DoneId var1      -> completeCall (zapSubstEnv env) var1 cont
                -- Note [zapSubstEnv]
                -- The template is already simplified, so don't re-substitute.
                -- This is VITAL.  Consider
                --      let x = e in
                --      let y = \z -> ...x... in
                --      \ x -> ...y...
                -- We'll clone the inner \x, adding x->x' in the id_subst
                -- Then when we inline y, we must *not* replace x by x' in
                -- the inlined copy!!

---------------------------------------------------------
--      Dealing with a call site

completeCall env var cont
  = do  { dflags <- getDOptsSmpl
        ; let   (args,call_cont) = contArgs cont
                -- The args are OutExprs, obtained by *lazily* substituting
                -- in the args found in cont.  These args are only examined
                -- to limited depth (unless a rule fires).  But we must do
                -- the substitution; rule matching on un-simplified args would
                -- be bogus

        ------------- First try rules ----------------
        -- Do this before trying inlining.  Some functions have 
        -- rules *and* are strict; in this case, we don't want to 
        -- inline the wrapper of the non-specialised thing; better
        -- to call the specialised thing instead.
        --
        -- We used to use the black-listing mechanism to ensure that inlining of 
        -- the wrapper didn't occur for things that have specialisations till a 
        -- later phase, so but now we just try RULES first
        --
        -- Note [Rules for recursive functions]
        -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        -- You might think that we shouldn't apply rules for a loop breaker: 
        -- doing so might give rise to an infinite loop, because a RULE is
        -- rather like an extra equation for the function:
        --      RULE:           f (g x) y = x+y
        --      Eqn:            f a     y = a-y
        --
        -- But it's too drastic to disable rules for loop breakers.  
        -- Even the foldr/build rule would be disabled, because foldr 
        -- is recursive, and hence a loop breaker:
        --      foldr k z (build g) = g k z
        -- So it's up to the programmer: rules can cause divergence
        ; rules <- getRules
        ; let   in_scope   = getInScope env
                maybe_rule = case activeRule dflags env of
                                Nothing     -> Nothing  -- No rules apply
                                Just act_fn -> lookupRule act_fn in_scope 
                                                          rules var args 
        ; case maybe_rule of {
            Just (rule, rule_rhs) -> 
                tick (RuleFired (ru_name rule))                 `thenSmpl_`
                (if dopt Opt_D_dump_rule_firings dflags then
                   pprTrace "Rule fired" (vcat [
                        text "Rule:" <+> ftext (ru_name rule),
                        text "Before:" <+> ppr var <+> sep (map pprParendExpr args),
                        text "After: " <+> pprCoreExpr rule_rhs,
                        text "Cont:  " <+> ppr call_cont])
                 else
                        id)             $
                simplExprF env rule_rhs (dropArgs (ruleArity rule) cont)
                -- The ruleArity says how many args the rule consumed
        
          ; Nothing -> do       -- No rules

        ------------- Next try inlining ----------------
        { let   arg_infos = [interestingArg arg | arg <- args, isValArg arg]
                n_val_args = length arg_infos
                interesting_cont = interestingCallContext (notNull args)
                                                          (notNull arg_infos)
                                                          call_cont
                active_inline = activeInline env var
                maybe_inline  = callSiteInline dflags active_inline
                                       var arg_infos interesting_cont
        ; case maybe_inline of {
            Just unfolding      -- There is an inlining!
              ->  do { tick (UnfoldingDone var)
                     ; (if dopt Opt_D_dump_inlinings dflags then
                           pprTrace ("Inlining done" ++ showSDoc (ppr var)) (vcat [
                                text "Before:" <+> ppr var <+> sep (map pprParendExpr args),
                                text "Inlined fn: " <+> nest 2 (ppr unfolding),
                                text "Cont:  " <+> ppr call_cont])
                         else
                                id)
                       simplExprF env unfolding cont }

            ; Nothing ->                -- No inlining!

        ------------- No inlining! ----------------
        -- Next, look for rules or specialisations that match
        --
        rebuildCall env (Var var) (idType var) 
                    (mkArgInfo var n_val_args call_cont) cont
    }}}}

rebuildCall :: SimplEnv
            -> OutExpr -> OutType       -- Function and its type
            -> (Bool, [Bool])           -- See SimplUtils.mkArgInfo
            -> SimplCont
            -> SimplM (SimplEnv, OutExpr)
rebuildCall env fun fun_ty (has_rules, []) cont
  -- When we run out of strictness args, it means
  -- that the call is definitely bottom; see SimplUtils.mkArgInfo
  -- Then we want to discard the entire strict continuation.  E.g.
  --    * case (error "hello") of { ... }
  --    * (error "Hello") arg
  --    * f (error "Hello") where f is strict
  --    etc
  -- Then, especially in the first of these cases, we'd like to discard
  -- the continuation, leaving just the bottoming expression.  But the
  -- type might not be right, so we may have to add a coerce.
  | not (contIsTrivial cont)     -- Only do this if there is a non-trivial
  = return (env, mk_coerce fun)  -- contination to discard, else we do it
  where                          -- again and again!
    cont_ty = contResultType cont
    co      = mkUnsafeCoercion fun_ty cont_ty
    mk_coerce expr | cont_ty `coreEqType` fun_ty = fun
                   | otherwise = mkCoerce co fun

rebuildCall env fun fun_ty info (ApplyTo _ (Type arg_ty) se cont)
  = do  { ty' <- simplType (se `setInScope` env) arg_ty
        ; rebuildCall env (fun `App` Type ty') (applyTy fun_ty ty') info cont }

rebuildCall env fun fun_ty (has_rules, str:strs) (ApplyTo _ arg arg_se cont)
  | str || isStrictType arg_ty          -- Strict argument
  = -- pprTrace "Strict Arg" (ppr arg $$ ppr (seIdSubst env) $$ ppr (seInScope env)) $
    simplExprF (arg_se `setFloats` env) arg
               (StrictArg fun fun_ty (has_rules, strs) cont)
                -- Note [Shadowing]

  | otherwise                           -- Lazy argument
        -- DO NOT float anything outside, hence simplExprC
        -- There is no benefit (unlike in a let-binding), and we'd
        -- have to be very careful about bogus strictness through 
        -- floating a demanded let.
  = do  { arg' <- simplExprC (arg_se `setInScope` env) arg
                             (mkLazyArgStop arg_ty has_rules)
        ; rebuildCall env (fun `App` arg') res_ty (has_rules, strs) cont }
  where
    (arg_ty, res_ty) = splitFunTy fun_ty

rebuildCall env fun fun_ty info cont
  = rebuild env fun cont
\end{code}

Note [Shadowing]
~~~~~~~~~~~~~~~~
This part of the simplifier may break the no-shadowing invariant
Consider
        f (...(\a -> e)...) (case y of (a,b) -> e')
where f is strict in its second arg
If we simplify the innermost one first we get (...(\a -> e)...)
Simplifying the second arg makes us float the case out, so we end up with
        case y of (a,b) -> f (...(\a -> e)...) e'
So the output does not have the no-shadowing invariant.  However, there is
no danger of getting name-capture, because when the first arg was simplified
we used an in-scope set that at least mentioned all the variables free in its
static environment, and that is enough.

We can't just do innermost first, or we'd end up with a dual problem:
        case x of (a,b) -> f e (...(\a -> e')...)

I spent hours trying to recover the no-shadowing invariant, but I just could
not think of an elegant way to do it.  The simplifier is already knee-deep in
continuations.  We have to keep the right in-scope set around; AND we have
to get the effect that finding (error "foo") in a strict arg position will
discard the entire application and replace it with (error "foo").  Getting
all this at once is TOO HARD!

%************************************************************************
%*                                                                      *
                Rebuilding a cse expression
%*                                                                      *
%************************************************************************

Blob of helper functions for the "case-of-something-else" situation.

\begin{code}
---------------------------------------------------------
--      Eliminate the case if possible

rebuildCase :: SimplEnv
            -> OutExpr          -- Scrutinee
            -> InId             -- Case binder
            -> [InAlt]          -- Alternatives (inceasing order)
            -> SimplCont
            -> SimplM (SimplEnv, OutExpr)

--------------------------------------------------
--      1. Eliminate the case if there's a known constructor
--------------------------------------------------

rebuildCase env scrut case_bndr alts cont
  | Just (con,args) <- exprIsConApp_maybe scrut 
        -- Works when the scrutinee is a variable with a known unfolding
        -- as well as when it's an explicit constructor application
  = knownCon env scrut (DataAlt con) args case_bndr alts cont

  | Lit lit <- scrut    -- No need for same treatment as constructors
                        -- because literals are inlined more vigorously
  = knownCon env scrut (LitAlt lit) [] case_bndr alts cont


--------------------------------------------------
--      2. Eliminate the case if scrutinee is evaluated
--------------------------------------------------

rebuildCase env scrut case_bndr [(con,bndrs,rhs)] cont
  -- See if we can get rid of the case altogether
  -- See the extensive notes on case-elimination above
  -- mkCase made sure that if all the alternatives are equal, 
  -- then there is now only one (DEFAULT) rhs
 | all isDeadBinder bndrs       -- bndrs are [InId]

        -- Check that the scrutinee can be let-bound instead of case-bound
 , exprOkForSpeculation scrut
                -- OK not to evaluate it
                -- This includes things like (==# a# b#)::Bool
                -- so that we simplify 
                --      case ==# a# b# of { True -> x; False -> x }
                -- to just
                --      x
                -- This particular example shows up in default methods for
                -- comparision operations (e.g. in (>=) for Int.Int32)
        || exprIsHNF scrut                      -- It's already evaluated
        || var_demanded_later scrut             -- It'll be demanded later

--      || not opt_SimplPedanticBottoms)        -- Or we don't care!
--      We used to allow improving termination by discarding cases, unless -fpedantic-bottoms was on,
--      but that breaks badly for the dataToTag# primop, which relies on a case to evaluate
--      its argument:  case x of { y -> dataToTag# y }
--      Here we must *not* discard the case, because dataToTag# just fetches the tag from
--      the info pointer.  So we'll be pedantic all the time, and see if that gives any
--      other problems
--      Also we don't want to discard 'seq's
  = do  { tick (CaseElim case_bndr)
        ; env <- simplNonRecX env case_bndr scrut
        ; simplExprF env rhs cont }
  where
        -- The case binder is going to be evaluated later, 
        -- and the scrutinee is a simple variable
    var_demanded_later (Var v) = isStrictDmd (idNewDemandInfo case_bndr)
                                 && not (isTickBoxOp v) 
                                    -- ugly hack; covering this case is what 
                                    -- exprOkForSpeculation was intended for.
    var_demanded_later other   = False


--------------------------------------------------
--      3. Catch-all case
--------------------------------------------------

rebuildCase env scrut case_bndr alts cont
  = do  {       -- Prepare the continuation;
                -- The new subst_env is in place
          (env, dup_cont, nodup_cont) <- prepareCaseCont env alts cont

        -- Simplify the alternatives
        ; (scrut', case_bndr', alts') <- simplAlts env scrut case_bndr alts dup_cont
        ; let res_ty' = contResultType dup_cont
        ; case_expr <- mkCase scrut' case_bndr' res_ty' alts'

        -- Notice that rebuildDone returns the in-scope set from env, not alt_env
        -- The case binder *not* scope over the whole returned case-expression
        ; rebuild env case_expr nodup_cont }
\end{code}

simplCaseBinder checks whether the scrutinee is a variable, v.  If so,
try to eliminate uses of v in the RHSs in favour of case_bndr; that
way, there's a chance that v will now only be used once, and hence
inlined.

Note [no-case-of-case]
~~~~~~~~~~~~~~~~~~~~~~
There is a time we *don't* want to do that, namely when
-fno-case-of-case is on.  This happens in the first simplifier pass,
and enhances full laziness.  Here's the bad case:
        f = \ y -> ...(case x of I# v -> ...(case x of ...) ... )
If we eliminate the inner case, we trap it inside the I# v -> arm,
which might prevent some full laziness happening.  I've seen this
in action in spectral/cichelli/Prog.hs:
         [(m,n) | m <- [1..max], n <- [1..max]]
Hence the check for NoCaseOfCase.

Note [Suppressing the case binder-swap]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
There is another situation when it might make sense to suppress the
case-expression binde-swap. If we have

    case x of w1 { DEFAULT -> case x of w2 { A -> e1; B -> e2 }
                   ...other cases .... }

We'll perform the binder-swap for the outer case, giving

    case x of w1 { DEFAULT -> case w1 of w2 { A -> e1; B -> e2 } 
                   ...other cases .... }

But there is no point in doing it for the inner case, because w1 can't
be inlined anyway.  Furthermore, doing the case-swapping involves
zapping w2's occurrence info (see paragraphs that follow), and that
forces us to bind w2 when doing case merging.  So we get

    case x of w1 { A -> let w2 = w1 in e1
                   B -> let w2 = w1 in e2
                   ...other cases .... }

This is plain silly in the common case where w2 is dead.

Even so, I can't see a good way to implement this idea.  I tried
not doing the binder-swap if the scrutinee was already evaluated
but that failed big-time:

        data T = MkT !Int

        case v of w  { MkT x ->
        case x of x1 { I# y1 ->
        case x of x2 { I# y2 -> ...

Notice that because MkT is strict, x is marked "evaluated".  But to
eliminate the last case, we must either make sure that x (as well as
x1) has unfolding MkT y1.  THe straightforward thing to do is to do
the binder-swap.  So this whole note is a no-op.

Note [zapOccInfo]
~~~~~~~~~~~~~~~~~
If we replace the scrutinee, v, by tbe case binder, then we have to nuke
any occurrence info (eg IAmDead) in the case binder, because the
case-binder now effectively occurs whenever v does.  AND we have to do
the same for the pattern-bound variables!  Example:

        (case x of { (a,b) -> a }) (case x of { (p,q) -> q })

Here, b and p are dead.  But when we move the argment inside the first
case RHS, and eliminate the second case, we get

        case x of { (a,b) -> a b }

Urk! b is alive!  Reason: the scrutinee was a variable, and case elimination
happened.  

Indeed, this can happen anytime the case binder isn't dead:
        case <any> of x { (a,b) -> 
        case x of { (p,q) -> p } }
Here (a,b) both look dead, but come alive after the inner case is eliminated.
The point is that we bring into the envt a binding
        let x = (a,b) 
after the outer case, and that makes (a,b) alive.  At least we do unless
the case binder is guaranteed dead.

Note [Case of cast]
~~~~~~~~~~~~~~~~~~~
Consider        case (v `cast` co) of x { I# ->
                ... (case (v `cast` co) of {...}) ...
We'd like to eliminate the inner case.  We can get this neatly by 
arranging that inside the outer case we add the unfolding
        v |-> x `cast` (sym co)
to v.  Then we should inline v at the inner case, cancel the casts, and away we go
        
Note [Improving seq]
~~~~~~~~~~~~~~~~~~~
Consider
        type family F :: * -> *
        type instance F Int = Int

        ... case e of x { DEFAULT -> rhs } ...

where x::F Int.  Then we'd like to rewrite (F Int) to Int, getting

        case e `cast` co of x'::Int
           I# x# -> let x = x' `cast` sym co 
                    in rhs

so that 'rhs' can take advantage of hte form of x'.  Notice that Note
[Case of cast] may then apply to the result.

This showed up in Roman's experiments.  Example:
  foo :: F Int -> Int -> Int
  foo t n = t `seq` bar n
     where
       bar 0 = 0
       bar n = bar (n - case t of TI i -> i)
Here we'd like to avoid repeated evaluating t inside the loop, by 
taking advantage of the `seq`.

At one point I did transformation in LiberateCase, but it's more robust here.
(Otherwise, there's a danger that we'll simply drop the 'seq' altogether, before
LiberateCase gets to see it.)

Note [Case elimination]
~~~~~~~~~~~~~~~~~~~~~~~
The case-elimination transformation discards redundant case expressions.
Start with a simple situation:

        case x# of      ===>   e[x#/y#]
          y# -> e

(when x#, y# are of primitive type, of course).  We can't (in general)
do this for algebraic cases, because we might turn bottom into
non-bottom!

The code in SimplUtils.prepareAlts has the effect of generalise this
idea to look for a case where we're scrutinising a variable, and we
know that only the default case can match.  For example:

        case x of
          0#      -> ...
          DEFAULT -> ...(case x of
                         0#      -> ...
                         DEFAULT -> ...) ...

Here the inner case is first trimmed to have only one alternative, the
DEFAULT, after which it's an instance of the previous case.  This
really only shows up in eliminating error-checking code.

We also make sure that we deal with this very common case:

        case e of 
          x -> ...x...

Here we are using the case as a strict let; if x is used only once
then we want to inline it.  We have to be careful that this doesn't 
make the program terminate when it would have diverged before, so we
check that 
        - e is already evaluated (it may so if e is a variable)
        - x is used strictly, or

Lastly, the code in SimplUtils.mkCase combines identical RHSs.  So

        case e of       ===> case e of DEFAULT -> r
           True  -> r
           False -> r

Now again the case may be elminated by the CaseElim transformation.


Further notes about case elimination
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Consider:       test :: Integer -> IO ()
                test = print

Turns out that this compiles to:
    Print.test
      = \ eta :: Integer
          eta1 :: State# RealWorld ->
          case PrelNum.< eta PrelNum.zeroInteger of wild { __DEFAULT ->
          case hPutStr stdout
                 (PrelNum.jtos eta ($w[] @ Char))
                 eta1
          of wild1 { (# new_s, a4 #) -> PrelIO.lvl23 new_s  }}

Notice the strange '<' which has no effect at all. This is a funny one.  
It started like this:

f x y = if x < 0 then jtos x
          else if y==0 then "" else jtos x

At a particular call site we have (f v 1).  So we inline to get

        if v < 0 then jtos x 
        else if 1==0 then "" else jtos x

Now simplify the 1==0 conditional:

        if v<0 then jtos v else jtos v

Now common-up the two branches of the case:

        case (v<0) of DEFAULT -> jtos v

Why don't we drop the case?  Because it's strict in v.  It's technically
wrong to drop even unnecessary evaluations, and in practice they
may be a result of 'seq' so we *definitely* don't want to drop those.
I don't really know how to improve this situation.


\begin{code}
simplCaseBinder :: SimplEnv -> OutExpr -> OutId -> [InAlt]
                -> SimplM (SimplEnv, OutExpr, OutId)
simplCaseBinder env scrut case_bndr alts
  = do  { (env1, case_bndr1) <- simplBinder env case_bndr

        ; fam_envs <- getFamEnvs
        ; (env2, scrut2, case_bndr2) <- improve_seq fam_envs env1 scrut 
                                                case_bndr case_bndr1 alts
                        -- Note [Improving seq]

        ; let (env3, case_bndr3) = improve_case_bndr env2 scrut2 case_bndr2
                        -- Note [Case of cast]

        ; return (env3, scrut2, case_bndr3) }
  where

    improve_seq fam_envs env1 scrut case_bndr case_bndr1 [(DEFAULT,_,_)] 
        | Just (co, ty2) <- topNormaliseType fam_envs (idType case_bndr1)
        =  do { case_bndr2 <- newId FSLIT("nt") ty2
              ; let rhs  = DoneEx (Var case_bndr2 `Cast` mkSymCoercion co)
                    env2 = extendIdSubst env1 case_bndr rhs
              ; return (env2, scrut `Cast` co, case_bndr2) }

    improve_seq fam_envs env1 scrut case_bndr case_bndr1 alts
        = return (env1, scrut, case_bndr1)


    improve_case_bndr env scrut case_bndr
        | switchIsOn (getSwitchChecker env) NoCaseOfCase
                -- See Note [no-case-of-case]
        = (env, case_bndr)

        | otherwise     -- Failed try [see Note 2 above]
                        --     not (isEvaldUnfolding (idUnfolding v))
        = case scrut of
            Var v -> (modifyInScope env1 v case_bndr', case_bndr')
                -- Note about using modifyInScope for v here
                -- We could extend the substitution instead, but it would be
                -- a hack because then the substitution wouldn't be idempotent
                -- any more (v is an OutId).  And this does just as well.

            Cast (Var v) co -> (addBinderUnfolding env1 v rhs, case_bndr')
                            where
                                rhs = Cast (Var case_bndr') (mkSymCoercion co)

            other -> (env, case_bndr)
        where
          case_bndr' = zapOccInfo case_bndr
          env1       = modifyInScope env case_bndr case_bndr'


zapOccInfo :: InId -> InId      -- See Note [zapOccInfo]
zapOccInfo b = b `setIdOccInfo` NoOccInfo
\end{code}


simplAlts does two things:

1.  Eliminate alternatives that cannot match, including the
    DEFAULT alternative.

2.  If the DEFAULT alternative can match only one possible constructor,
    then make that constructor explicit.
    e.g.
        case e of x { DEFAULT -> rhs }
     ===>
        case e of x { (a,b) -> rhs }
    where the type is a single constructor type.  This gives better code
    when rhs also scrutinises x or e.

Here "cannot match" includes knowledge from GADTs

It's a good idea do do this stuff before simplifying the alternatives, to
avoid simplifying alternatives we know can't happen, and to come up with
the list of constructors that are handled, to put into the IdInfo of the
case binder, for use when simplifying the alternatives.

Eliminating the default alternative in (1) isn't so obvious, but it can
happen:

data Colour = Red | Green | Blue

f x = case x of
        Red -> ..
        Green -> ..
        DEFAULT -> h x

h y = case y of
        Blue -> ..
        DEFAULT -> [ case y of ... ]

If we inline h into f, the default case of the inlined h can't happen.
If we don't notice this, we may end up filtering out *all* the cases
of the inner case y, which give us nowhere to go!


\begin{code}
simplAlts :: SimplEnv 
          -> OutExpr
          -> InId                       -- Case binder
          -> [InAlt] -> SimplCont
          -> SimplM (OutExpr, OutId, [OutAlt])  -- Includes the continuation
-- Like simplExpr, this just returns the simplified alternatives;
-- it not return an environment

simplAlts env scrut case_bndr alts cont'
  = -- pprTrace "simplAlts" (ppr alts $$ ppr (seIdSubst env)) $
    do  { let alt_env = zapFloats env
        ; (alt_env, scrut', case_bndr') <- simplCaseBinder alt_env scrut case_bndr alts

        ; (imposs_deflt_cons, in_alts) <- prepareAlts scrut case_bndr' alts

        ; alts' <- mapM (simplAlt alt_env imposs_deflt_cons case_bndr' cont') in_alts
        ; return (scrut', case_bndr', alts') }

------------------------------------
simplAlt :: SimplEnv
         -> [AltCon]    -- These constructors can't be present when
                        -- matching the DEFAULT alternative
         -> OutId       -- The case binder
         -> SimplCont
         -> InAlt
         -> SimplM OutAlt

simplAlt env imposs_deflt_cons case_bndr' cont' (DEFAULT, bndrs, rhs)
  = ASSERT( null bndrs )
    do  { let env' = addBinderOtherCon env case_bndr' imposs_deflt_cons
                -- Record the constructors that the case-binder *can't* be.
        ; rhs' <- simplExprC env' rhs cont'
        ; return (DEFAULT, [], rhs') }

simplAlt env imposs_deflt_cons case_bndr' cont' (LitAlt lit, bndrs, rhs)
  = ASSERT( null bndrs )
    do  { let env' = addBinderUnfolding env case_bndr' (Lit lit)
        ; rhs' <- simplExprC env' rhs cont'
        ; return (LitAlt lit, [], rhs') }

simplAlt env imposs_deflt_cons case_bndr' cont' (DataAlt con, vs, rhs)
  = do  {       -- Deal with the pattern-bound variables
          (env, vs') <- simplBinders env (add_evals con vs)

                -- Mark the ones that are in ! positions in the
                -- data constructor as certainly-evaluated.
        ; let vs'' = add_evals con vs'

                -- Bind the case-binder to (con args)
        ; let inst_tys' = tyConAppArgs (idType case_bndr')
              con_args  = map Type inst_tys' ++ varsToCoreExprs vs'' 
              env'      = addBinderUnfolding env case_bndr' (mkConApp con con_args)

        ; rhs' <- simplExprC env' rhs cont'
        ; return (DataAlt con, vs'', rhs') }
  where
        -- add_evals records the evaluated-ness of the bound variables of
        -- a case pattern.  This is *important*.  Consider
        --      data T = T !Int !Int
        --
        --      case x of { T a b -> T (a+1) b }
        --
        -- We really must record that b is already evaluated so that we don't
        -- go and re-evaluate it when constructing the result.
        -- See Note [Data-con worker strictness] in MkId.lhs
    add_evals dc vs = cat_evals dc vs (dataConRepStrictness dc)

    cat_evals dc vs strs
        = go vs strs
        where
          go [] [] = []
          go (v:vs) strs | isTyVar v = v : go vs strs
          go (v:vs) (str:strs)
            | isMarkedStrict str = evald_v  : go vs strs
            | otherwise          = zapped_v : go vs strs
            where
              zapped_v = zap_occ_info v
              evald_v  = zapped_v `setIdUnfolding` evaldUnfolding
          go _ _ = pprPanic "cat_evals" (ppr dc $$ ppr vs $$ ppr strs)

        -- If the case binder is alive, then we add the unfolding
        --      case_bndr = C vs
        -- to the envt; so vs are now very much alive
        -- Note [Aug06] I can't see why this actually matters
    zap_occ_info | isDeadBinder case_bndr' = \id -> id
                 | otherwise               = zapOccInfo

addBinderUnfolding :: SimplEnv -> Id -> CoreExpr -> SimplEnv
addBinderUnfolding env bndr rhs
  = modifyInScope env bndr (bndr `setIdUnfolding` mkUnfolding False rhs)

addBinderOtherCon :: SimplEnv -> Id -> [AltCon] -> SimplEnv
addBinderOtherCon env bndr cons
  = modifyInScope env bndr (bndr `setIdUnfolding` mkOtherCon cons)
\end{code}


%************************************************************************
%*                                                                      *
\subsection{Known constructor}
%*                                                                      *
%************************************************************************

We are a bit careful with occurrence info.  Here's an example

        (\x* -> case x of (a*, b) -> f a) (h v, e)

where the * means "occurs once".  This effectively becomes
        case (h v, e) of (a*, b) -> f a)
and then
        let a* = h v; b = e in f a
and then
        f (h v)

All this should happen in one sweep.

\begin{code}
knownCon :: SimplEnv -> OutExpr -> AltCon -> [OutExpr]
         -> InId -> [InAlt] -> SimplCont
         -> SimplM (SimplEnv, OutExpr)

knownCon env scrut con args bndr alts cont
  = do  { tick (KnownBranch bndr)
        ; knownAlt env scrut args bndr (findAlt con alts) cont }

knownAlt env scrut args bndr (DEFAULT, bs, rhs) cont
  = ASSERT( null bs )
    do  { env <- simplNonRecX env bndr scrut
                -- This might give rise to a binding with non-atomic args
                -- like x = Node (f x) (g x)
                -- but simplNonRecX will atomic-ify it
        ; simplExprF env rhs cont }

knownAlt env scrut args bndr (LitAlt lit, bs, rhs) cont
  = ASSERT( null bs )
    do  { env <- simplNonRecX env bndr scrut
        ; simplExprF env rhs cont }

knownAlt env scrut args bndr (DataAlt dc, bs, rhs) cont
  = do  { let dead_bndr  = isDeadBinder bndr    -- bndr is an InId
              n_drop_tys = length (dataConUnivTyVars dc)
        ; env <- bind_args env dead_bndr bs (drop n_drop_tys args)
        ; let
                -- It's useful to bind bndr to scrut, rather than to a fresh
                -- binding      x = Con arg1 .. argn
                -- because very often the scrut is a variable, so we avoid
                -- creating, and then subsequently eliminating, a let-binding
                -- BUT, if scrut is a not a variable, we must be careful
                -- about duplicating the arg redexes; in that case, make
                -- a new con-app from the args
                bndr_rhs  = case scrut of
                                Var v -> scrut
                                other -> con_app
                con_app = mkConApp dc (take n_drop_tys args ++ con_args)
                con_args = [substExpr env (varToCoreExpr b) | b <- bs]
                                -- args are aready OutExprs, but bs are InIds

        ; env <- simplNonRecX env bndr bndr_rhs
        ; -- pprTrace "knownCon2" (ppr bs $$ ppr rhs $$ ppr (seIdSubst env)) $
          simplExprF env rhs cont }
  where
    -- Ugh!
    bind_args env dead_bndr [] _  = return env

    bind_args env dead_bndr (b:bs) (Type ty : args)
      = ASSERT( isTyVar b )
        bind_args (extendTvSubst env b ty) dead_bndr bs args

    bind_args env dead_bndr (b:bs) (arg : args)
      = ASSERT( isId b )
        do      { let b' = if dead_bndr then b else zapOccInfo b
                    -- Note that the binder might be "dead", because it doesn't occur 
                    -- in the RHS; and simplNonRecX may therefore discard it via postInlineUnconditionally
                    -- Nevertheless we must keep it if the case-binder is alive, because it may
                    -- be used in the con_app.  See Note [zapOccInfo]
            ; env <- simplNonRecX env b' arg
            ; bind_args env dead_bndr bs args }

    bind_args _ _ _ _ = 
      pprPanic "bind_args" $ ppr dc $$ ppr bs $$ ppr args $$ 
                             text "scrut:" <+> ppr scrut
\end{code}


%************************************************************************
%*                                                                      *
\subsection{Duplicating continuations}
%*                                                                      *
%************************************************************************

\begin{code}
prepareCaseCont :: SimplEnv
                -> [InAlt] -> SimplCont
                -> SimplM (SimplEnv, SimplCont,SimplCont)
                        -- Return a duplicatable continuation, a non-duplicable part 
                        -- plus some extra bindings (that scope over the entire
                        -- continunation)

        -- No need to make it duplicatable if there's only one alternative
prepareCaseCont env [alt] cont = return (env, cont, mkBoringStop (contResultType cont))
prepareCaseCont env alts  cont = mkDupableCont env cont
\end{code}

\begin{code}
mkDupableCont :: SimplEnv -> SimplCont 
              -> SimplM (SimplEnv, SimplCont, SimplCont)

mkDupableCont env cont
  | contIsDupable cont
  = returnSmpl (env, cont, mkBoringStop (contResultType cont))

mkDupableCont env (Stop {}) = panic "mkDupableCont"     -- Handled by previous eqn

mkDupableCont env (CoerceIt ty cont)
  = do  { (env, dup, nodup) <- mkDupableCont env cont
        ; return (env, CoerceIt ty dup, nodup) }

mkDupableCont env cont@(StrictBind bndr _ _ se _)
  =  return (env, mkBoringStop (substTy se (idType bndr)), cont)
        -- See Note [Duplicating strict continuations]

mkDupableCont env cont@(StrictArg _ fun_ty _ _)
  =  return (env, mkBoringStop (funArgTy fun_ty), cont)
        -- See Note [Duplicating strict continuations]

mkDupableCont env (ApplyTo _ arg se cont)
  =     -- e.g.         [...hole...] (...arg...)
        --      ==>
        --              let a = ...arg... 
        --              in [...hole...] a
    do  { (env, dup_cont, nodup_cont) <- mkDupableCont env cont
        ; arg <- simplExpr (se `setInScope` env) arg
        ; (env, arg) <- makeTrivial env arg
        ; let app_cont = ApplyTo OkToDup arg (zapSubstEnv env) dup_cont
        ; return (env, app_cont, nodup_cont) }

mkDupableCont env cont@(Select _ case_bndr [(_,bs,rhs)] se case_cont)
--  See Note [Single-alternative case]
--  | not (exprIsDupable rhs && contIsDupable case_cont)
--  | not (isDeadBinder case_bndr)
  | all isDeadBinder bs         -- InIds
  = return (env, mkBoringStop scrut_ty, cont)
  where
    scrut_ty = substTy se (idType case_bndr)

mkDupableCont env (Select _ case_bndr alts se cont)
  =     -- e.g.         (case [...hole...] of { pi -> ei })
        --      ===>
        --              let ji = \xij -> ei 
        --              in case [...hole...] of { pi -> ji xij }
    do  { tick (CaseOfCase case_bndr)
        ; (env, dup_cont, nodup_cont) <- mkDupableCont env cont
                -- NB: call mkDupableCont here, *not* prepareCaseCont
                -- We must make a duplicable continuation, whereas prepareCaseCont
                -- doesn't when there is a single case branch

        ; let alt_env = se `setInScope` env 
        ; (alt_env, case_bndr') <- simplBinder alt_env case_bndr
        ; alts' <- mapM (simplAlt alt_env [] case_bndr' dup_cont) alts
        -- Safe to say that there are no handled-cons for the DEFAULT case
                -- NB: simplBinder does not zap deadness occ-info, so
                -- a dead case_bndr' will still advertise its deadness
                -- This is really important because in
                --      case e of b { (# p,q #) -> ... }
                -- b is always dead, and indeed we are not allowed to bind b to (# p,q #),
                -- which might happen if e was an explicit unboxed pair and b wasn't marked dead.
                -- In the new alts we build, we have the new case binder, so it must retain
                -- its deadness.
        -- NB: we don't use alt_env further; it has the substEnv for
        --     the alternatives, and we don't want that

        ; (env, alts') <- mkDupableAlts env case_bndr' alts'
        ; return (env,  -- Note [Duplicated env]
                  Select OkToDup case_bndr' alts' (zapSubstEnv env)
                         (mkBoringStop (contResultType dup_cont)),
                  nodup_cont) }


mkDupableAlts :: SimplEnv -> OutId -> [InAlt]
              -> SimplM (SimplEnv, [InAlt])
-- Absorbs the continuation into the new alternatives

mkDupableAlts env case_bndr' alts
  = go env alts
  where
    go env [] = return (env, [])
    go env (alt:alts)
        = do { (env, alt') <- mkDupableAlt env case_bndr' alt
     ; (env, alts') <- go env alts
             ; return (env, alt' : alts' ) }
                                        
mkDupableAlt env case_bndr' (con, bndrs', rhs')
  | exprIsDupable rhs'  -- Note [Small alternative rhs]
  = return (env, (con, bndrs', rhs'))
  | otherwise
  = do  { let rhs_ty'     = exprType rhs'
              used_bndrs' = filter abstract_over (case_bndr' : bndrs')
              abstract_over bndr 
                  | isTyVar bndr = True -- Abstract over all type variables just in case
                  | otherwise    = not (isDeadBinder bndr)
                        -- The deadness info on the new Ids is preserved by simplBinders

        ; (final_bndrs', final_args)    -- Note [Join point abstraction]
                <- if (any isId used_bndrs')
                   then return (used_bndrs', varsToCoreExprs used_bndrs')
                    else do { rw_id <- newId FSLIT("w") realWorldStatePrimTy
                            ; return ([rw_id], [Var realWorldPrimId]) }
             
        ; join_bndr <- newId FSLIT("$j") (mkPiTypes final_bndrs' rhs_ty')
                -- Note [Funky mkPiTypes]
        
        ; let   -- We make the lambdas into one-shot-lambdas.  The
                -- join point is sure to be applied at most once, and doing so
                -- prevents the body of the join point being floated out by
                -- the full laziness pass
                really_final_bndrs     = map one_shot final_bndrs'
                one_shot v | isId v    = setOneShotLambda v
                           | otherwise = v
                join_rhs  = mkLams really_final_bndrs rhs'
                join_call = mkApps (Var join_bndr) final_args

        ; return (addNonRec env join_bndr join_rhs, (con, bndrs', join_call)) }
                -- See Note [Duplicated env]
\end{code}

Note [Duplicated env]
~~~~~~~~~~~~~~~~~~~~~
Some of the alternatives are simplified, but have not been turned into a join point
So they *must* have an zapped subst-env.  So we can't use completeNonRecX to
bind the join point, because it might to do PostInlineUnconditionally, and
we'd lose that when zapping the subst-env.  We could have a per-alt subst-env,
but zapping it (as we do in mkDupableCont, the Select case) is safe, and
at worst delays the join-point inlining.

Note [Small alterantive rhs]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
It is worth checking for a small RHS because otherwise we
get extra let bindings that may cause an extra iteration of the simplifier to
inline back in place.  Quite often the rhs is just a variable or constructor.
The Ord instance of Maybe in PrelMaybe.lhs, for example, took several extra
iterations because the version with the let bindings looked big, and so wasn't
inlined, but after the join points had been inlined it looked smaller, and so
was inlined.

NB: we have to check the size of rhs', not rhs. 
Duplicating a small InAlt might invalidate occurrence information
However, if it *is* dupable, we return the *un* simplified alternative,
because otherwise we'd need to pair it up with an empty subst-env....
but we only have one env shared between all the alts.
(Remember we must zap the subst-env before re-simplifying something).
Rather than do this we simply agree to re-simplify the original (small) thing later.

Note [Funky mkPiTypes]
~~~~~~~~~~~~~~~~~~~~~~
Notice the funky mkPiTypes.  If the contructor has existentials
it's possible that the join point will be abstracted over
type varaibles as well as term variables.
 Example:  Suppose we have
        data T = forall t.  C [t]
 Then faced with
        case (case e of ...) of
            C t xs::[t] -> rhs
 We get the join point
        let j :: forall t. [t] -> ...
            j = /\t \xs::[t] -> rhs
        in
        case (case e of ...) of
            C t xs::[t] -> j t xs

Note [Join point abstaction]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If we try to lift a primitive-typed something out
for let-binding-purposes, we will *caseify* it (!),
with potentially-disastrous strictness results.  So
instead we turn it into a function: \v -> e
where v::State# RealWorld#.  The value passed to this function
is realworld#, which generates (almost) no code.

There's a slight infelicity here: we pass the overall 
case_bndr to all the join points if it's used in *any* RHS,
because we don't know its usage in each RHS separately

We used to say "&& isUnLiftedType rhs_ty'" here, but now
we make the join point into a function whenever used_bndrs'
is empty.  This makes the join-point more CPR friendly. 
Consider:       let j = if .. then I# 3 else I# 4
                in case .. of { A -> j; B -> j; C -> ... }

Now CPR doesn't w/w j because it's a thunk, so
that means that the enclosing function can't w/w either,
which is a lose.  Here's the example that happened in practice:
        kgmod :: Int -> Int -> Int
        kgmod x y = if x > 0 && y < 0 || x < 0 && y > 0
                    then 78
                    else 5

I have seen a case alternative like this:
        True -> \v -> ...
It's a bit silly to add the realWorld dummy arg in this case, making
        $j = \s v -> ...
           True -> $j s
(the \v alone is enough to make CPR happy) but I think it's rare

Note [Duplicating strict continuations]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Do *not* duplicate StrictBind and StritArg continuations.  We gain
nothing by propagating them into the expressions, and we do lose a
lot.  Here's an example:
        && (case x of { T -> F; F -> T }) E
Now, && is strict so we end up simplifying the case with
an ArgOf continuation.  If we let-bind it, we get

        let $j = \v -> && v E
        in simplExpr (case x of { T -> F; F -> T })
                     (ArgOf (\r -> $j r)
And after simplifying more we get

        let $j = \v -> && v E
        in case x of { T -> $j F; F -> $j T }
Which is a Very Bad Thing

The desire not to duplicate is the entire reason that
mkDupableCont returns a pair of continuations.

The original plan had:
e.g.    (...strict-fn...) [...hole...]
        ==>
                let $j = \a -> ...strict-fn...
                in $j [...hole...]

Note [Single-alternative cases]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This case is just like the ArgOf case.  Here's an example:
        data T a = MkT !a
        ...(MkT (abs x))...
Then we get
        case (case x of I# x' -> 
              case x' <# 0# of
                True  -> I# (negate# x')
                False -> I# x') of y {
          DEFAULT -> MkT y
Because the (case x) has only one alternative, we'll transform to
        case x of I# x' ->
        case (case x' <# 0# of
                True  -> I# (negate# x')
                False -> I# x') of y {
          DEFAULT -> MkT y
But now we do *NOT* want to make a join point etc, giving 
        case x of I# x' ->
        let $j = \y -> MkT y
        in case x' <# 0# of
                True  -> $j (I# (negate# x'))
                False -> $j (I# x')
In this case the $j will inline again, but suppose there was a big
strict computation enclosing the orginal call to MkT.  Then, it won't
"see" the MkT any more, because it's big and won't get duplicated.
And, what is worse, nothing was gained by the case-of-case transform.

When should use this case of mkDupableCont?  
However, matching on *any* single-alternative case is a *disaster*;
  e.g.  case (case ....) of (a,b) -> (# a,b #)
  We must push the outer case into the inner one!
Other choices:

   * Match [(DEFAULT,_,_)], but in the common case of Int, 
     the alternative-filling-in code turned the outer case into
                case (...) of y { I# _ -> MkT y }

   * Match on single alternative plus (not (isDeadBinder case_bndr))
     Rationale: pushing the case inwards won't eliminate the construction.
     But there's a risk of
                case (...) of y { (a,b) -> let z=(a,b) in ... }
     Now y looks dead, but it'll come alive again.  Still, this
     seems like the best option at the moment.

   * Match on single alternative plus (all (isDeadBinder bndrs))
     Rationale: this is essentially  seq.

   * Match when the rhs is *not* duplicable, and hence would lead to a
     join point.  This catches the disaster-case above.  We can test
     the *un-simplified* rhs, which is fine.  It might get bigger or
     smaller after simplification; if it gets smaller, this case might
     fire next time round.  NB also that we must test contIsDupable
     case_cont *btoo, because case_cont might be big!

     HOWEVER: I found that this version doesn't work well, because
     we can get         let x = case (...) of { small } in ...case x...
     When x is inlined into its full context, we find that it was a bad
     idea to have pushed the outer case inside the (...) case.