[ghc-hetmet.git] / compiler / types / FunDeps.lhs

%
% (c) The GRASP/AQUA Project, Glasgow University, 2000
%
\section[FunDeps]{FunDeps - functional dependencies}

It's better to read it as: "if we know these, then we're going to know these"

\begin{code}
module FunDeps (
        Equation, pprEquation,
        oclose, grow, improve, 
        checkInstCoverage, checkFunDeps,
        pprFundeps
    ) where

#include "HsVersions.h"

import Name             ( Name, getSrcLoc )
import Var              ( TyVar )
import Class            ( Class, FunDep, pprFundeps, classTvsFds )
import TcGadt           ( tcUnifyTys, BindFlag(..) )
import Type             ( substTys, notElemTvSubst )
import TcType           ( Type, PredType(..), tcEqType, 
                          predTyUnique, mkClassPred, tyVarsOfTypes, tyVarsOfPred )
import InstEnv          ( Instance(..), InstEnv, instanceHead, classInstances,
                          instanceCantMatch, roughMatchTcs )
import VarSet
import VarEnv
import Outputable
import Util             ( notNull )
import List             ( tails )
import Maybe            ( isJust )
import ListSetOps       ( equivClassesByUniq )
\end{code}


%************************************************************************
%*                                                                      *
\subsection{Close type variables}
%*                                                                      *
%************************************************************************

(oclose preds tvs) closes the set of type variables tvs, 
wrt functional dependencies in preds.  The result is a superset
of the argument set.  For example, if we have
        class C a b | a->b where ...
then
        oclose [C (x,y) z, C (x,p) q] {x,y} = {x,y,z}
because if we know x and y then that fixes z.

Using oclose
~~~~~~~~~~~~
oclose is used

a) When determining ambiguity.  The type
        forall a,b. C a b => a
is not ambiguous (given the above class decl for C) because
a determines b.  

b) When generalising a type T.  Usually we take FV(T) \ FV(Env),
but in fact we need
        FV(T) \ (FV(Env)+)
where the '+' is the oclosure operation.  Notice that we do not 
take FV(T)+.  This puzzled me for a bit.  Consider

        f = E

and suppose e have that E :: C a b => a, and suppose that b is
free in the environment. Then we quantify over 'a' only, giving
the type forall a. C a b => a.  Since a->b but we don't have b->a,
we might have instance decls like
        instance C Bool Int where ...
        instance C Char Int where ...
so knowing that b=Int doesn't fix 'a'; so we quantify over it.

                ---------------
                A WORRY: ToDo!
                ---------------
If we have      class C a b => D a b where ....
                class D a b | a -> b where ...
and the preds are [C (x,y) z], then we want to see the fd in D,
even though it is not explicit in C, giving [({x,y},{z})]

Similarly for instance decls?  E.g. Suppose we have
        instance C a b => Eq (T a b) where ...
and we infer a type t with constraints Eq (T a b) for a particular
expression, and suppose that 'a' is free in the environment.  
We could generalise to
        forall b. Eq (T a b) => t
but if we reduced the constraint, to C a b, we'd see that 'a' determines
b, so that a better type might be
        t (with free constraint C a b) 
Perhaps it doesn't matter, because we'll still force b to be a
particular type at the call sites.  Generalising over too many
variables (provided we don't shadow anything by quantifying over a
variable that is actually free in the envt) may postpone errors; it
won't hide them altogether.


\begin{code}
oclose :: [PredType] -> TyVarSet -> TyVarSet
oclose preds fixed_tvs
  | null tv_fds = fixed_tvs     -- Fast escape hatch for common case
  | otherwise   = loop fixed_tvs
  where
    loop fixed_tvs
        | new_fixed_tvs `subVarSet` fixed_tvs = fixed_tvs
        | otherwise                           = loop new_fixed_tvs
        where
          new_fixed_tvs = foldl extend fixed_tvs tv_fds

    extend fixed_tvs (ls,rs) | ls `subVarSet` fixed_tvs = fixed_tvs `unionVarSet` rs
                             | otherwise                = fixed_tvs

    tv_fds  :: [(TyVarSet,TyVarSet)]
        -- In our example, tv_fds will be [ ({x,y}, {z}), ({x,p},{q}) ]
        -- Meaning "knowing x,y fixes z, knowing x,p fixes q"
    tv_fds  = [ (tyVarsOfTypes xs, tyVarsOfTypes ys)
              | ClassP cls tys <- preds,                -- Ignore implicit params
                let (cls_tvs, cls_fds) = classTvsFds cls,
                fd <- cls_fds,
                let (xs,ys) = instFD fd cls_tvs tys
              ]
\end{code}

\begin{code}
grow :: [PredType] -> TyVarSet -> TyVarSet
-- See Note [Ambiguity] in TcSimplify
grow preds fixed_tvs 
  | null preds = fixed_tvs
  | otherwise  = loop fixed_tvs
  where
    loop fixed_tvs
        | new_fixed_tvs `subVarSet` fixed_tvs = fixed_tvs
        | otherwise                           = loop new_fixed_tvs
        where
          new_fixed_tvs = foldl extend fixed_tvs pred_sets

    extend fixed_tvs pred_tvs 
        | fixed_tvs `intersectsVarSet` pred_tvs = fixed_tvs `unionVarSet` pred_tvs
        | otherwise                             = fixed_tvs

    pred_sets = [tyVarsOfPred pred | pred <- preds]
\end{code}
    
%************************************************************************
%*                                                                      *
\subsection{Generate equations from functional dependencies}
%*                                                                      *
%************************************************************************


\begin{code}
----------
type Equation = (TyVarSet, [(Type, Type)])
-- These pairs of types should be equal, for some
-- substitution of the tyvars in the tyvar set
-- INVARIANT: corresponding types aren't already equal

-- It's important that we have a *list* of pairs of types.  Consider
--      class C a b c | a -> b c where ...
--      instance C Int x x where ...
-- Then, given the constraint (C Int Bool v) we should improve v to Bool,
-- via the equation ({x}, [(Bool,x), (v,x)])
-- This would not happen if the class had looked like
--      class C a b c | a -> b, a -> c

-- To "execute" the equation, make fresh type variable for each tyvar in the set,
-- instantiate the two types with these fresh variables, and then unify.
--
-- For example, ({a,b}, (a,Int,b), (Int,z,Bool))
-- We unify z with Int, but since a and b are quantified we do nothing to them
-- We usually act on an equation by instantiating the quantified type varaibles
-- to fresh type variables, and then calling the standard unifier.

pprEquation (qtvs, pairs) 
  = vcat [ptext SLIT("forall") <+> braces (pprWithCommas ppr (varSetElems qtvs)),
          nest 2 (vcat [ ppr t1 <+> ptext SLIT(":=:") <+> ppr t2 | (t1,t2) <- pairs])]

----------
type Pred_Loc = (PredType, SDoc)        -- SDoc says where the Pred comes from

improve :: (Class -> [Instance])                -- Gives instances for given class
        -> [Pred_Loc]                           -- Current constraints; 
        -> [(Equation,Pred_Loc,Pred_Loc)]       -- Derived equalities that must also hold
                                                -- (NB the above INVARIANT for type Equation)
                                                -- The Pred_Locs explain which two predicates were
                                                -- combined (for error messages)
\end{code}

Given a bunch of predicates that must hold, such as

        C Int t1, C Int t2, C Bool t3, ?x::t4, ?x::t5

improve figures out what extra equations must hold.
For example, if we have

        class C a b | a->b where ...

then improve will return

        [(t1,t2), (t4,t5)]

NOTA BENE:

  * improve does not iterate.  It's possible that when we make
    t1=t2, for example, that will in turn trigger a new equation.
    This would happen if we also had
        C t1 t7, C t2 t8
    If t1=t2, we also get t7=t8.

    improve does *not* do this extra step.  It relies on the caller
    doing so.

  * The equations unify types that are not already equal.  So there
    is no effect iff the result of improve is empty



\begin{code}
improve inst_env preds
  = [ eqn | group <- equivClassesByUniq (predTyUnique . fst) preds,
            eqn   <- checkGroup inst_env group ]

----------
checkGroup :: (Class -> [Instance])
           -> [Pred_Loc]
           -> [(Equation, Pred_Loc, Pred_Loc)]
  -- The preds are all for the same class or implicit param

checkGroup inst_env (p1@(IParam _ ty, _) : ips)
  =     -- For implicit parameters, all the types must match
    [ ((emptyVarSet, [(ty,ty')]), p1, p2) 
    | p2@(IParam _ ty', _) <- ips, not (ty `tcEqType` ty')]

checkGroup inst_env clss@((ClassP cls _, _) : _)
  =     -- For classes life is more complicated  
        -- Suppose the class is like
        --      classs C as | (l1 -> r1), (l2 -> r2), ... where ...
        -- Then FOR EACH PAIR (ClassP c tys1, ClassP c tys2) in the list clss
        -- we check whether
        --      U l1[tys1/as] = U l2[tys2/as]
        --  (where U is a unifier)
        -- 
        -- If so, we return the pair
        --      U r1[tys1/as] = U l2[tys2/as]
        --
        -- We need to do something very similar comparing each predicate
        -- with relevant instance decls

    instance_eqns ++ pairwise_eqns
        -- NB: we put the instance equations first.   This biases the 
        -- order so that we first improve individual constraints against the
        -- instances (which are perhaps in a library and less likely to be
        -- wrong; and THEN perform the pairwise checks.
        -- The other way round, it's possible for the pairwise check to succeed
        -- and cause a subsequent, misleading failure of one of the pair with an
        -- instance declaration.  See tcfail143.hs for an exmample

  where
    (cls_tvs, cls_fds) = classTvsFds cls
    instances          = inst_env cls

        -- NOTE that we iterate over the fds first; they are typically
        -- empty, which aborts the rest of the loop.
    pairwise_eqns :: [(Equation,Pred_Loc,Pred_Loc)]
    pairwise_eqns       -- This group comes from pairwise comparison
      = [ (eqn, p1, p2)
        | fd <- cls_fds,
          p1@(ClassP _ tys1, _) : rest <- tails clss,
          p2@(ClassP _ tys2, _) <- rest,
          eqn <- checkClsFD emptyVarSet fd cls_tvs tys1 tys2
        ]

    instance_eqns :: [(Equation,Pred_Loc,Pred_Loc)]
    instance_eqns       -- This group comes from comparing with instance decls
      = [ (eqn, p1, p2)
        | fd <- cls_fds,        -- Iterate through the fundeps first, 
                                -- because there often are none!
          p2@(ClassP _ tys2, _) <- clss,
          let rough_tcs2 = trimRoughMatchTcs cls_tvs fd (roughMatchTcs tys2),
          ispec@(Instance { is_tvs = qtvs, is_tys = tys1, 
                            is_tcs = mb_tcs1 }) <- instances,
          not (instanceCantMatch mb_tcs1 rough_tcs2),
          eqn <- checkClsFD qtvs fd cls_tvs tys1 tys2,
          let p1 = (mkClassPred cls tys1, 
                    ptext SLIT("arising from the instance declaration at") <+> 
                        ppr (getSrcLoc ispec))
        ]
----------
checkClsFD :: TyVarSet                  -- Quantified type variables; see note below
           -> FunDep TyVar -> [TyVar]   -- One functional dependency from the class
           -> [Type] -> [Type]
           -> [Equation]

checkClsFD qtvs fd clas_tvs tys1 tys2
-- 'qtvs' are the quantified type variables, the ones which an be instantiated 
-- to make the types match.  For example, given
--      class C a b | a->b where ...
--      instance C (Maybe x) (Tree x) where ..
--
-- and an Inst of form (C (Maybe t1) t2), 
-- then we will call checkClsFD with
--
--      qtvs = {x}, tys1 = [Maybe x,  Tree x]
--                  tys2 = [Maybe t1, t2]
--
-- We can instantiate x to t1, and then we want to force
--      (Tree x) [t1/x]  :=:   t2
--
-- This function is also used when matching two Insts (rather than an Inst
-- against an instance decl. In that case, qtvs is empty, and we are doing
-- an equality check
-- 
-- This function is also used by InstEnv.badFunDeps, which needs to *unify*
-- For the one-sided matching case, the qtvs are just from the template,
-- so we get matching
--
  = ASSERT2( length tys1 == length tys2     && 
             length tys1 == length clas_tvs 
            , ppr tys1 <+> ppr tys2 )

    case tcUnifyTys bind_fn ls1 ls2 of
        Nothing  -> []
        Just subst | isJust (tcUnifyTys bind_fn rs1' rs2') 
                        -- Don't include any equations that already hold. 
                        -- Reason: then we know if any actual improvement has happened,
                        --         in which case we need to iterate the solver
                        -- In making this check we must taking account of the fact that any 
                        -- qtvs that aren't already instantiated can be instantiated to anything 
                        -- at all
                  -> []

                  | otherwise   -- Aha!  A useful equation
                  -> [ (qtvs', zip rs1' rs2')]
                        -- We could avoid this substTy stuff by producing the eqn
                        -- (qtvs, ls1++rs1, ls2++rs2)
                        -- which will re-do the ls1/ls2 unification when the equation is
                        -- executed.  What we're doing instead is recording the partial
                        -- work of the ls1/ls2 unification leaving a smaller unification problem
                  where
                    rs1'  = substTys subst rs1 
                    rs2'  = substTys subst rs2
                    qtvs' = filterVarSet (`notElemTvSubst` subst) qtvs
                        -- qtvs' are the quantified type variables
                        -- that have not been substituted out
                        --      
                        -- Eg.  class C a b | a -> b
                        --      instance C Int [y]
                        -- Given constraint C Int z
                        -- we generate the equation
                        --      ({y}, [y], z)
  where
    bind_fn tv | tv `elemVarSet` qtvs = BindMe
               | otherwise            = Skolem

    (ls1, rs1) = instFD fd clas_tvs tys1
    (ls2, rs2) = instFD fd clas_tvs tys2

instFD :: FunDep TyVar -> [TyVar] -> [Type] -> FunDep Type
instFD (ls,rs) tvs tys
  = (map lookup ls, map lookup rs)
  where
    env       = zipVarEnv tvs tys
    lookup tv = lookupVarEnv_NF env tv
\end{code}

\begin{code}
checkInstCoverage :: Class -> [Type] -> Bool
-- Check that the Coverage Condition is obeyed in an instance decl
-- For example, if we have 
--      class theta => C a b | a -> b
--      instance C t1 t2 
-- Then we require fv(t2) `subset` fv(t1)
-- See Note [Coverage Condition] below

checkInstCoverage clas inst_taus
  = all fundep_ok fds
  where
    (tyvars, fds) = classTvsFds clas
    fundep_ok fd  = tyVarsOfTypes rs `subVarSet` tyVarsOfTypes ls
                 where
                   (ls,rs) = instFD fd tyvars inst_taus
\end{code}

Note [Coverage condition]
~~~~~~~~~~~~~~~~~~~~~~~~~
For the coverage condition, we used to require only that 
        fv(t2) `subset` oclose(fv(t1), theta)

Example:
        class Mul a b c | a b -> c where
                (.*.) :: a -> b -> c

        instance Mul Int Int Int where (.*.) = (*)
        instance Mul Int Float Float where x .*. y = fromIntegral x * y
        instance Mul a b c => Mul a [b] [c] where x .*. v = map (x.*.) v

In the third instance, it's not the case that fv([c]) `subset` fv(a,[b]).
But it is the case that fv([c]) `subset` oclose( theta, fv(a,[b]) )

But it is a mistake to accept the instance because then this defn:
        f = \ b x y -> if b then x .*. [y] else y
makes instance inference go into a loop, because it requires the constraint
        Mul a [b] b


%************************************************************************
%*                                                                      *
        Check that a new instance decl is OK wrt fundeps
%*                                                                      *
%************************************************************************

Here is the bad case:
        class C a b | a->b where ...
        instance C Int Bool where ...
        instance C Int Char where ...

The point is that a->b, so Int in the first parameter must uniquely
determine the second.  In general, given the same class decl, and given

        instance C s1 s2 where ...
        instance C t1 t2 where ...

Then the criterion is: if U=unify(s1,t1) then U(s2) = U(t2).

Matters are a little more complicated if there are free variables in
the s2/t2.  

        class D a b c | a -> b
        instance D a b => D [(a,a)] [b] Int
        instance D a b => D [a]     [b] Bool

The instance decls don't overlap, because the third parameter keeps
them separate.  But we want to make sure that given any constraint
        D s1 s2 s3
if s1 matches 


\begin{code}
checkFunDeps :: (InstEnv, InstEnv) -> Instance
             -> Maybe [Instance]        -- Nothing  <=> ok
                                        -- Just dfs <=> conflict with dfs
-- Check wheher adding DFunId would break functional-dependency constraints
-- Used only for instance decls defined in the module being compiled
checkFunDeps inst_envs ispec
  | null bad_fundeps = Nothing
  | otherwise        = Just bad_fundeps
  where
    (ins_tvs, _, clas, ins_tys) = instanceHead ispec
    ins_tv_set   = mkVarSet ins_tvs
    cls_inst_env = classInstances inst_envs clas
    bad_fundeps  = badFunDeps cls_inst_env clas ins_tv_set ins_tys

badFunDeps :: [Instance] -> Class
           -> TyVarSet -> [Type]        -- Proposed new instance type
           -> [Instance]
badFunDeps cls_insts clas ins_tv_set ins_tys 
  = [ ispec | fd <- fds,        -- fds is often empty
              let trimmed_tcs = trimRoughMatchTcs clas_tvs fd rough_tcs,
              ispec@(Instance { is_tcs = mb_tcs, is_tvs = tvs, 
                                is_tys = tys }) <- cls_insts,
                -- Filter out ones that can't possibly match, 
                -- based on the head of the fundep
              not (instanceCantMatch trimmed_tcs mb_tcs),       
              notNull (checkClsFD (tvs `unionVarSet` ins_tv_set) 
                                   fd clas_tvs tys ins_tys)
    ]
  where
    (clas_tvs, fds) = classTvsFds clas
    rough_tcs = roughMatchTcs ins_tys

trimRoughMatchTcs :: [TyVar] -> FunDep TyVar -> [Maybe Name] -> [Maybe Name]
-- Computing rough_tcs for a particular fundep
--      class C a b c | a c -> b where ... 
-- For each instance .... => C ta tb tc
-- we want to match only on the types ta, tb; so our
-- rough-match thing must similarly be filtered.  
-- Hence, we Nothing-ise the tb type right here
trimRoughMatchTcs clas_tvs (ltvs,_) mb_tcs
  = zipWith select clas_tvs mb_tcs
  where
    select clas_tv mb_tc | clas_tv `elem` ltvs = mb_tc
                         | otherwise           = Nothing
\end{code}