ghc.mk

   1 # -----------------------------------------------------------------------------
   2 #
   3 # (c) 2009 The University of Glasgow
   4 #
   5 # This file is part of the GHC build system.
   6 #
   7 # To understand how the build system works and how to modify it, see
   8 #      http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture
   9 #      http://hackage.haskell.org/trac/ghc/wiki/Building/Modifying
  10 #
  11 # -----------------------------------------------------------------------------
  12
  13 # ToDo List.
  14 #
  15 #   * finish installation
  16 #     * Windows: should we have ghc-pkg-<version>?
  17 #     * should we be stripping things?
  18 #     * install libgmp.a, gmp.h
  19 #   * need to fix Cabal for new Windows layout, see
  20 #     Distribution/Simple/GHC.configureToolchain.
  21 #   * remove old Makefiles, add new stubs for building in subdirs
  22 #     * docs/Makefile
  23 #     * docs/docbook-cheat-sheet/Makefile
  24 #     * docs/ext-core/Makefile
  25 #     * docs/man/Makefile
  26 #     * docs/storage-mgmt/Makefile
  27 #     * docs/vh/Makefile
  28 #     * rts/dotnet/Makefile
  29 #     * utils/Makefile
  30 #   * optionally install stage3?
  31 #   * add Makefiles for the rest of the utils/ programs that aren't built
  32 #     by default (need to exclude them from 'make all' too)
  33 #
  34 # Tickets we can now close, or fix and close:
  35 #
  36 #   * 1693 make distclean
  37
  38 # Possible cleanups:
  39 #
  40 #   * per-source-file dependencies instead of one .depend file?
  41 #   * eliminate undefined variables, and use --warn-undefined-variables?
  42 #   * put outputs from different ways in different subdirs of distdir/build,
  43 #     then we don't have to use -osuf/-hisuf.  We would have to install
  44 #     them in different places too, so we'd need ghc-pkg support for packages
  45 #     of different ways.
  46 #   * make PACKAGES generated by './configure' or 'perl boot'?
  47 #   * we should use a directory of package.conf files rather than a single
  48 #     file for the inplace package database, so that we can express
  49 #     dependencies more accurately.  Otherwise it's possible to get into
  50 #     a state where the package database is out of date, and the build
  51 #     system doesn't know.
  52
  53 # Approximate build order.
  54 #
  55 # The actual build order is defined by dependencies, and the phase
  56 # ordering used to ensure correct ordering of makefile-generation; see
  57 #    http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
  58 #
  59 #     * With bootstrapping compiler:
  60 #           o Build utils/ghc-cabal
  61 #           o Build utils/ghc-pkg
  62 #           o Build utils/hsc2hs
  63 #     * For each package:
  64 #           o configure, generate package-data.mk and inplace-pkg-info
  65 #           o register each package into inplace/lib/package.conf
  66 #     * build libffi
  67 #     * With bootstrapping compiler:
  68 #           o Build libraries/{filepath,hpc,extensible-exceptions,Cabal}
  69 #           o Build compiler (stage 1)
  70 #     * With stage 1:
  71 #           o Build libraries/*
  72 #           o Build rts
  73 #           o Build utils/* (except haddock)
  74 #           o Build compiler (stage 2)
  75 #     * With stage 2:
  76 #           o Build utils/haddock
  77 #           o Build compiler (stage 3) (optional)
  78 #     * With haddock:
  79 #           o libraries/*
  80 #           o compiler
  81
  82 .PHONY: default all haddock
  83
  84 # We need second expansion for the way we handle directories, so that
  85 #     | $$$$(dir $$$$@)/.
  86 # expands to the directory of a rule that uses a % pattern.
  87 .SECONDEXPANSION:
  88
  89 default : all
  90
  91 # Catch make if it runs away into an infinite loop
  92 ifeq      "$(MAKE_RESTARTS)" ""
  93 else ifeq "$(MAKE_RESTARTS)" "1"
  94 else ifeq "$(MAKE_RESTARTS)" "2"
  95 else
  96 $(error Make has restarted itself $(MAKE_RESTARTS) times; is there a makefile bug?)
  97 endif
  98
  99 # Just bring makefiles up to date:
 100 .PHONY: just-makefiles
 101 just-makefiles:
 102         @:
 103
 104 # -----------------------------------------------------------------------------
 105 # Misc GNU make utils
 106
 107 nothing=
 108 space=$(nothing) $(nothing)
 109 comma=,
 110
 111 # Cancel all suffix rules.  Ideally we'd like to have 'make -r' turned on
 112 # by default, because that disables all the implicit rules, but there doesn't
 113 # seem to be a good way to do that.  This turns off all the old-style suffix
 114 # rules, which does half the job and speeds up make quite a bit:
 115 .SUFFIXES:
 116
 117 # -----------------------------------------------------------------------------
 118 #                       Makefile debugging
 119 # to see the effective value used for a Makefile variable, do
 120 #  make show VALUE=MY_VALUE
 121 #
 122
 123 show:
 124         @echo '$(VALUE)="$($(VALUE))"'
 125
 126 # -----------------------------------------------------------------------------
 127 # Include subsidiary build-system bits
 128
 129 include mk/tree.mk
 130
 131 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
 132 include mk/config.mk
 133 ifeq "$(ProjectVersion)" ""
 134 $(error Please run ./configure first)
 135 endif
 136 endif
 137
 138 include mk/ways.mk
 139
 140 # (Optional) build-specific configuration
 141 include mk/custom-settings.mk
 142
 143 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
 144 ifeq "$(GhcLibWays)" ""
 145 $(error $$(GhcLibWays) is empty, it must contain at least one way)
 146 endif
 147 endif
 148
 149 # -----------------------------------------------------------------------------
 150 # Macros for standard targets
 151
 152 include rules/all-target.mk
 153 include rules/clean-target.mk
 154
 155 # -----------------------------------------------------------------------------
 156 # The inplace tree
 157
 158 $(eval $(call clean-target,inplace,,inplace))
 159
 160 # -----------------------------------------------------------------------------
 161 # Whether to build dependencies or not
 162
 163 # When we're just doing 'make clean' or 'make show', then we don't need
 164 # to build dependencies.
 165
 166 ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
 167 NO_INCLUDE_DEPS = YES
 168 NO_INCLUDE_PKGDATA = YES
 169 endif
 170 ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
 171 NO_INCLUDE_DEPS = YES
 172 NO_INCLUDE_PKGDATA = YES
 173 endif
 174 ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
 175 NO_INCLUDE_DEPS = YES
 176 # We want package-data.mk for show
 177 endif
 178
 179 # We don't haddock the bootstrapping libraries
 180 libraries/hpc_dist-boot_DO_HADDOCK = NO
 181 libraries/Cabal_dist-boot_DO_HADDOCK = NO
 182 libraries/extensible-exceptions_dist-boot_DO_HADDOCK = NO
 183 libraries/filepath_dist-boot_DO_HADDOCK = NO
 184 libraries/binary_dist-boot_DO_HADDOCK = NO
 185 libraries/bin-package-db_dist-boot_DO_HADDOCK = NO
 186
 187 # -----------------------------------------------------------------------------
 188 # Ways
 189
 190 include rules/way-prelims.mk
 191
 192 $(foreach way,$(ALL_WAYS),\
 193   $(eval $(call way-prelims,$(way))))
 194
 195 # -----------------------------------------------------------------------------
 196 # Compilation Flags
 197
 198 include rules/distdir-way-opts.mk
 199
 200 # -----------------------------------------------------------------------------
 201 # Finding source files and object files
 202
 203 include rules/hs-sources.mk
 204 include rules/c-sources.mk
 205 include rules/includes-sources.mk
 206 include rules/hs-objs.mk
 207 include rules/c-objs.mk
 208 include rules/cmm-objs.mk
 209
 210 # -----------------------------------------------------------------------------
 211 # Suffix rules
 212
 213 # Suffix rules cause "make clean" to fail on Windows (trac #3233)
 214 # so we don't make any when cleaning.
 215 ifneq "$(CLEANING)" "YES"
 216
 217 include rules/hs-suffix-rules-srcdir.mk
 218 include rules/hs-suffix-rules.mk
 219
 220 # -----------------------------------------------------------------------------
 221 # Suffix rules for .hi files
 222
 223 include rules/hi-rule.mk
 224
 225 $(foreach way,$(ALL_WAYS),\
 226   $(eval $(call hi-rule,$(way))))
 227
 228 #-----------------------------------------------------------------------------
 229 # C-related suffix rules
 230
 231 include rules/c-suffix-rules.mk
 232
 233 #-----------------------------------------------------------------------------
 234 # CMM-related suffix rules
 235
 236 include rules/cmm-suffix-rules.mk
 237
 238 endif
 239
 240 # -----------------------------------------------------------------------------
 241 # Building package-data.mk files from .cabal files
 242
 243 include rules/package-config.mk
 244
 245 # -----------------------------------------------------------------------------
 246 # Building dependencies
 247
 248 include rules/build-dependencies.mk
 249
 250 # -----------------------------------------------------------------------------
 251 # Build package-data.mk files
 252
 253 include rules/build-package-data.mk
 254
 255 # -----------------------------------------------------------------------------
 256 # Build and install a program
 257
 258 include rules/build-prog.mk
 259 include rules/shell-wrapper.mk
 260
 261 # -----------------------------------------------------------------------------
 262 # Build a perl script
 263
 264 include rules/build-perl.mk
 265
 266 # -----------------------------------------------------------------------------
 267 # Build a package
 268
 269 include rules/build-package.mk
 270 include rules/build-package-way.mk
 271 include rules/haddock.mk
 272 include rules/tags-package.mk
 273
 274 # -----------------------------------------------------------------------------
 275 # Registering hand-written package descriptions (used in libffi and rts)
 276
 277 include rules/manual-package-config.mk
 278
 279 # -----------------------------------------------------------------------------
 280 # Docs
 281
 282 include rules/docbook.mk
 283
 284 # -----------------------------------------------------------------------------
 285 # Making bindists
 286
 287 include rules/bindist.mk
 288
 289 # -----------------------------------------------------------------------------
 290 # Building libraries
 291
 292 define addPackage # args: $1 = package, $2 = condition
 293     ifneq "$2" ""
 294         ifeq "$$(CLEANING)" "YES"
 295             PACKAGES += $1
 296         else
 297             ifeq $2
 298                 PACKAGES += $1
 299             endif
 300         endif
 301     else
 302         PACKAGES += $1
 303     endif
 304 endef
 305
 306 $(eval $(call addPackage,ghc-prim))
 307 ifeq "$(CLEANING)" "YES"
 308 $(eval $(call addPackage,integer-gmp))
 309 $(eval $(call addPackage,integer-simple))
 310 else
 311 $(eval $(call addPackage,$(INTEGER_LIBRARY)))
 312 endif
 313 $(eval $(call addPackage,base))
 314 $(eval $(call addPackage,filepath))
 315 $(eval $(call addPackage,array))
 316 $(eval $(call addPackage,bytestring))
 317 $(eval $(call addPackage,containers))
 318
 319 $(eval $(call addPackage,Win32,($$(Windows),YES)))
 320 $(eval $(call addPackage,unix,($$(Windows),NO)))
 321
 322 $(eval $(call addPackage,old-locale))
 323 $(eval $(call addPackage,old-time))
 324 $(eval $(call addPackage,time))
 325 $(eval $(call addPackage,directory))
 326 $(eval $(call addPackage,process))
 327 $(eval $(call addPackage,random))
 328 $(eval $(call addPackage,extensible-exceptions))
 329 $(eval $(call addPackage,haskell98))
 330 $(eval $(call addPackage,hpc))
 331 $(eval $(call addPackage,pretty))
 332 $(eval $(call addPackage,template-haskell))
 333 $(eval $(call addPackage,Cabal))
 334 $(eval $(call addPackage,binary))
 335 $(eval $(call addPackage,bin-package-db))
 336 $(eval $(call addPackage,mtl))
 337 $(eval $(call addPackage,utf8-string))
 338 $(eval $(call addPackage,xhtml))
 339
 340 $(eval $(call addPackage,terminfo,($$(Windows),NO)))
 341
 342 $(eval $(call addPackage,haskeline))
 343
 344 $(foreach pkg,$(EXTRA_PACKAGES),$(eval $(call addPackage,$(pkg))))
 345
 346 ifneq "$(BootingFromHc)" "YES"
 347 PACKAGES_STAGE2 += \
 348         dph/dph-base \
 349         dph/dph-prim-interface \
 350         dph/dph-prim-seq \
 351         dph/dph-prim-par \
 352         dph/dph-seq \
 353         dph/dph-par
 354 endif
 355
 356 # We assume that the stage0 compiler has a suitable bytestring package,
 357 # so we don't have to include it below.
 358 BOOT_PKGS = Cabal hpc extensible-exceptions binary bin-package-db
 359
 360 BOOT_PKG_CONSTRAINTS := $(foreach p,$(BOOT_PKGS),--constraint "$p == $(shell grep -i "^Version:" libraries/$p/$p.cabal | sed "s/[^0-9.]//g")")
 361
 362 # The actual .a and .so/.dll files: needed for dependencies.
 363 ALL_STAGE1_LIBS  = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_v_LIB))
 364 ifeq "$(BuildSharedLibs)" "YES"
 365 ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_dyn_LIB))
 366 endif
 367 BOOT_LIBS = $(foreach lib,$(BOOT_PKGS),$(libraries/$(lib)_dist-boot_v_LIB))
 368
 369 OTHER_LIBS = libffi/dist-install/build/libHSffi$(v_libsuf) libffi/dist-install/build/HSffi.o
 370 ifeq "$(BuildSharedLibs)" "YES"
 371 OTHER_LIBS  += libffi/dist-install/build/libHSffi$(dyn_libsuf)
 372 endif
 373
 374 # We cannot run ghc-cabal to configure a package until we have
 375 # configured and registered all of its dependencies.  So the following
 376 # hack forces all the configure steps to happen in exactly the following order:
 377 #
 378 #  $(PACKAGES) ghc(stage2) $(PACKAGES_STAGE2)
 379 #
 380 # Ideally we should use the correct dependencies here to allow more
 381 # parallelism, but we don't know the dependencies until we've
 382 # generated the pacakge-data.mk files.
 383 define fixed_pkg_dep
 384 libraries/$1/$2/package-data.mk : $$(GHC_PKG_INPLACE) $$(fixed_pkg_prev)
 385 fixed_pkg_prev:=libraries/$1/$2/package-data.mk
 386 endef
 387
 388 ifneq "$(BINDIST)" "YES"
 389 fixed_pkg_prev=
 390 $(foreach pkg,$(PACKAGES),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
 391
 392 # the GHC package doesn't live in libraries/, so we add its dependency manually:
 393 compiler/stage2/package-data.mk: $(fixed_pkg_prev)
 394 fixed_pkg_prev:=compiler/stage2/package-data.mk
 395
 396 # and continue with PACKAGES_STAGE2, which depend on GHC:
 397 $(foreach pkg,$(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
 398
 399 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
 400 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
 401 # haddock depends on ghc and some libraries, but depending on GHC's
 402 # package-data.mk is sufficient, as that in turn depends on all the
 403 # libraries
 404 utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
 405
 406 utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
 407 utils/compare_sizes/dist/package-data.mk: compiler/stage2/package-data.mk
 408
 409 # add the final two package.conf dependencies: ghc-prim depends on RTS,
 410 # and RTS depends on libffi.
 411 libraries/ghc-prim/dist-install/package-data.mk : rts/package.conf.inplace
 412 rts/package.conf.inplace : libffi/package.conf.inplace
 413 endif
 414
 415 # -----------------------------------------------------------------------------
 416 # Directories
 417
 418 # Don't try to delete directories:
 419 .PRECIOUS: %/.
 420
 421 # Create build directories on demand.  NB. the | below: this indicates
 422 # that $(MKDIRHIER) is an order-only dependency, which means that this
 423 # rule fires after building mkdirhier, but we won't try to recreate
 424 # directories if mkdirhier changes.
 425 %/. : | $(MKDIRHIER)
 426         "$(MKDIRHIER)" $@
 427
 428 # -----------------------------------------------------------------------------
 429 # Special magic for the ghc-prim package
 430
 431 # We want the ghc-prim package to include the GHC.Prim module when it
 432 # is registered, but not when it is built, because GHC.Prim is not a
 433 # real source module, it is built-in to GHC.  The old build system did
 434 # this using Setup.hs, but we can't do that here, so we have a flag to
 435 # enable GHC.Prim in the .cabal file (so that the ghc-prim package
 436 # remains compatible with the old build system for the time being).
 437 # GHC.Prim module in the ghc-prim package with a flag:
 438 #
 439 libraries/ghc-prim_CONFIGURE_OPTS += --flag=include-ghc-prim
 440
 441 # And then we strip it out again before building the package:
 442 define libraries/ghc-prim_PACKAGE_MAGIC
 443 libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
 444 endef
 445
 446 PRIMOPS_TXT = $(GHC_COMPILER_DIR)/prelude/primops.txt
 447
 448 libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT) | $$(dir $$@)/.
 449         "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers <$(PRIMOPS_TXT) >$@
 450
 451 # Required so that Haddock documents the primops.
 452 libraries/ghc-prim_dist-install_EXTRA_HADDOCK_SRCS = libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
 453
 454 # -----------------------------------------------------------------------------
 455 # Include build instructions from all subdirs
 456
 457 # For the rationale behind the build phases, see
 458 #   http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
 459
 460 # Setting foo_dist_DISABLE=YES means "in directory foo, for build
 461 # "dist", just read the package-data.mk file, do not build anything".
 462
 463 # We carefully engineer things so that we can build the
 464 # package-data.mk files early on: they depend only on a few tools also
 465 # built early.  Having got the package-data.mk files built, we can
 466 # restart make with up-to-date information about all the packages
 467 # (this is phase 0).  The remaining problem is the .depend files:
 468 #
 469 #   - .depend files in libraries need the stage 1 compiler to build
 470 #   - ghc/stage1/.depend needs compiler/stage1 built
 471 #   - compiler/stage1/.depend needs the bootstrap libs built
 472 #
 473 # GHC 6.11+ can build a .depend file without having built the
 474 # dependencies of the package, but we can't rely on the bootstrapping
 475 # compiler being able to do this, which is why we have to separate the
 476 # three phases above.
 477
 478 # So this is the final ordering:
 479
 480 # Phase 0 : all package-data.mk files
 481 #           (requires ghc-cabal, ghc-pkg, mkdirhier, dummy-ghc etc.)
 482 # Phase 1 : .depend files for bootstrap libs
 483 #           (requires hsc2hs)
 484 # Phase 2 : compiler/stage1/.depend
 485 #           (requires bootstrap libs and genprimopcode)
 486 # Phase 3 : ghc/stage1/.depend
 487 #           (requires compiler/stage1)
 488 #
 489 # The rest : libraries/*/dist-install, compiler/stage2, ghc/stage2
 490
 491 BUILD_DIRS =
 492
 493 ifneq "$(BINDIST)" "YES"
 494 BUILD_DIRS += \
 495    $(GHC_MKDIRHIER_DIR)
 496 endif
 497
 498 BUILD_DIRS += \
 499    docs/users_guide \
 500    docs/ext-core \
 501    docs/man \
 502    libraries/Cabal/doc \
 503    $(GHC_UNLIT_DIR) \
 504    $(GHC_HP2PS_DIR)
 505
 506 ifneq "$(GhcUnregisterised)" "YES"
 507 BUILD_DIRS += \
 508    $(GHC_MANGLER_DIR) \
 509    $(GHC_SPLIT_DIR)
 510 endif
 511
 512 ifneq "$(BINDIST)" "YES"
 513 BUILD_DIRS += \
 514    $(GHC_GENPRIMOP_DIR)
 515 endif
 516
 517 BUILD_DIRS += \
 518    driver \
 519    driver/ghci \
 520    driver/ghc \
 521    libffi \
 522    includes \
 523    rts
 524
 525 ifneq "$(BINDIST)" "YES"
 526 BUILD_DIRS += \
 527    bindisttest \
 528    $(GHC_CABAL_DIR) \
 529    $(GHC_GENAPPLY_DIR)
 530 endif
 531
 532 ifneq "$(HADDOCK_DOCS)" "NO"
 533 BUILD_DIRS += \
 534    utils/haddock \
 535    utils/haddock/doc
 536 endif
 537
 538 ifneq "$(CLEANING)" "YES"
 539 BUILD_DIRS += \
 540    $(patsubst %, libraries/%, $(PACKAGES))
 541 endif
 542
 543 ifneq "$(BootingFromHc)" "YES"
 544 BUILD_DIRS += \
 545    libraries/dph
 546 endif
 547
 548 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
 549 BUILD_DIRS += libraries/integer-gmp/gmp
 550 endif
 551
 552 BUILD_DIRS += \
 553    compiler \
 554    $(GHC_HSC2HS_DIR) \
 555    $(GHC_PKG_DIR) \
 556    utils/testremove \
 557    utils/ghctags \
 558    utils/hpc \
 559    utils/runghc \
 560    ghc
 561 ifeq "$(Windows)" "YES"
 562 BUILD_DIRS += \
 563    $(GHC_TOUCHY_DIR)
 564 endif
 565
 566 BUILD_DIRS += utils/count_lines
 567 BUILD_DIRS += utils/compare_sizes
 568
 569 ifneq "$(CLEANING)" "YES"
 570 # After compiler/, because these packages depend on it
 571 BUILD_DIRS += \
 572    $(patsubst %, libraries/%, $(PACKAGES_STAGE2))
 573 endif
 574
 575 # XXX libraries/% must come before any programs built with stage1, see
 576 # Note [lib-depends].
 577
 578 ifeq "$(phase)" "0"
 579 $(foreach lib,$(BOOT_PKGS),$(eval \
 580   libraries/$(lib)_dist-boot_DISABLE = YES))
 581 endif
 582
 583 ifneq "$(findstring $(phase),0 1)" ""
 584 # We can build deps for compiler/stage1 in phase 2
 585 compiler_stage1_DISABLE = YES
 586 endif
 587
 588 ifneq "$(findstring $(phase),0 1 2)" ""
 589 ghc_stage1_DISABLE = YES
 590 endif
 591
 592 ifneq "$(CLEANING)" "YES"
 593 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
 594 libraries/base_dist-install_CONFIGURE_OPTS += --flags=-integer-simple
 595 else
 596     ifeq "$(INTEGER_LIBRARY)" "integer-simple"
 597         libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-simple
 598     else
 599 $(error Unknown integer library: $(INTEGER_LIBRARY))
 600     endif
 601 endif
 602 endif
 603
 604 ifneq "$(findstring $(phase),0 1 2 3)" ""
 605 # In phases 0-3, we disable stage2-3, the full libraries and haddock
 606 utils/haddock_dist_DISABLE = YES
 607 utils/runghc_dist_DISABLE = YES
 608 utils/ghctags_dist_DISABLE = YES
 609 utils/hpc_dist_DISABLE = YES
 610 utils/hsc2hs_dist-install_DISABLE = YES
 611 utils/ghc-pkg_dist-install_DISABLE = YES
 612 utils/compare_sizes_dist_DISABLE = YES
 613 compiler_stage2_DISABLE = YES
 614 compiler_stage3_DISABLE = YES
 615 ghc_stage2_DISABLE = YES
 616 ghc_stage3_DISABLE = YES
 617 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),$(eval \
 618   libraries/$(lib)_dist-install_DISABLE = YES))
 619 endif
 620
 621 # These packages don't pass the Cabal checks because hs-source-dirs
 622 # points outside the source directory. This isn't a real problem in
 623 # these cases, so we just skip checking them.
 624 CHECKED_libraries/dph/dph-seq = YES
 625 CHECKED_libraries/dph/dph-par = YES
 626 # In compiler's case, include-dirs points outside of the source tree
 627 CHECKED_compiler = YES
 628
 629 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
 630
 631 # We need -fno-warn-deprecated-flags to avoid failure with -Werror
 632 GhcLibHcOpts += -fno-warn-deprecated-flags
 633 GhcBootLibHcOpts += -fno-warn-deprecated-flags
 634
 635 # ----------------------------------------------
 636 # Per-package compiler flags
 637 #
 638 # If you want to add per-package compiler flags, this
 639 # is the place to do it.  Do it like this for package <pkg>
 640 #
 641 #   libraries/<pkg>_dist-boot_HC_OPTS += -Wwarn
 642 #   libraries/<pkg>_dist-install_HC_OPTS += -Wwarn
 643
 644
 645 # Add $(GhcLibHcOpts) to all library builds
 646 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
 647
 648 # XXX Hack; remove this
 649 # Use -Wwarn for dph
 650 $(foreach pkg,$(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += -Wwarn))
 651
 652 # XXX Hack; remove this
 653 # Use -Wwarn for 'binary' becuase it has redundant UNPACK pragmas
 654 libraries/binary_dist-install_HC_OPTS += -Wwarn
 655 libraries/binary_dist-boot_HC_OPTS += -Wwarn
 656
 657 # XXX hack: xhtml has warnings
 658 libraries/xhtml_dist-install_HC_OPTS += -Wwarn
 659
 660 # ----------------------------------------------
 661 # A useful pseudo-target
 662 .PHONY: stage1_libs
 663 stage1_libs : $(ALL_STAGE1_LIBS)
 664
 665 ifeq "$(HADDOCK_DOCS)" "YES"
 666 libraries/index.html: $(ALL_HADDOCK_FILES)
 667         cd libraries && sh gen_contents_index --inplace
 668 $(eval $(call all-target,library_doc_index,libraries/index.html))
 669 INSTALL_LIBRARY_DOCS += libraries/*.html libraries/*.gif libraries/*.css libraries/*.js
 670 CLEAN_FILES += libraries/doc-index* libraries/haddock*.css \
 671                libraries/haddock*.js libraries/index*.html libraries/*.gif
 672 endif
 673
 674 ifeq "$(CHECK_PACKAGES)" "YES"
 675 all: check_packages
 676 endif
 677
 678 # -----------------------------------------------------------------------------
 679 # Bootstrapping libraries
 680
 681 # We need to build a few libraries with the installed GHC, since GHC itself
 682 # and some of the tools depend on them:
 683
 684 ifneq "$(BINDIST)" "YES"
 685
 686 ifneq "$(BOOTSTRAPPING_CONF)" ""
 687 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
 688 $(shell echo "[]" >$(BOOTSTRAPPING_CONF))
 689 endif
 690 endif
 691
 692 $(eval $(call clean-target,$(BOOTSTRAPPING_CONF),,$(BOOTSTRAPPING_CONF)))
 693
 694 # These three libraries do not depend on each other, so we can build
 695 # them straight off:
 696
 697 $(eval $(call build-package,libraries/hpc,dist-boot,0))
 698 $(eval $(call build-package,libraries/extensible-exceptions,dist-boot,0))
 699 $(eval $(call build-package,libraries/Cabal,dist-boot,0))
 700 $(eval $(call build-package,libraries/binary,dist-boot,0))
 701 $(eval $(call build-package,libraries/bin-package-db,dist-boot,0))
 702
 703 # register the boot packages in strict sequence, because running
 704 # multiple ghc-pkgs in parallel doesn't work (registrations may get
 705 # lost).
 706 fixed_pkg_prev=
 707 $(foreach pkg,$(BOOT_PKGS),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
 708
 709 compiler/stage1/package-data.mk : \
 710     libraries/Cabal/dist-boot/package-data.mk \
 711     libraries/hpc/dist-boot/package-data.mk \
 712     libraries/extensible-exceptions/dist-boot/package-data.mk \
 713     libraries/bin-package-db/dist-boot/package-data.mk
 714
 715 # These are necessary because the bootstrapping compiler may not know
 716 # about cross-package dependencies:
 717 $(compiler_stage1_depfile_haskell) : $(BOOT_LIBS)
 718 $(ghc_stage1_depfile_haskell) : $(compiler_stage1_v_LIB)
 719
 720 # A few careful dependencies between bootstrapping packages.  When we
 721 # can rely on the stage 0 compiler being able to generate
 722 # cross-package dependencies with -M (fixed in GHC 6.12.1) we can drop
 723 # these, and also some of the phases.
 724 #
 725 # If you miss any out here, then 'make -j8' will probably tell you.
 726 #
 727 libraries/bin-package-db/dist-boot/build/Distribution/InstalledPackageInfo/Binary.$(v_osuf) : libraries/binary/dist-boot/build/Data/Binary.$(v_hisuf) libraries/Cabal/dist-boot/build/Distribution/InstalledPackageInfo.$(v_hisuf)
 728
 729 $(foreach pkg,$(BOOT_PKGS),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
 730
 731 # Make sure we have all the GHCi libs by the time we've built
 732 # ghc-stage2.  DPH includes a bit of Template Haskell which needs the
 733 # GHCI libs, and we don't have a better way to express that dependency.
 734 #
 735 GHCI_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_GHCI_LIB)) \
 736             $(compiler_stage2_GHCI_LIB)
 737
 738 ghc/stage2/build/tmp/$(ghc_stage2_PROG) : $(GHCI_LIBS)
 739
 740 endif
 741
 742 # -----------------------------------------------------------------------------
 743 # Creating a local mingw copy on Windows
 744
 745 ifeq "$(Windows)" "YES"
 746
 747 install : install_mingw
 748 .PHONY: install_mingw
 749 install_mingw : $(INPLACE_MINGW)
 750         "$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
 751
 752 install : install_perl
 753 .PHONY: install_perl
 754 install_perl : $(INPLACE_PERL)
 755         "$(CP)" -Rp $(INPLACE_PERL) $(prefix)
 756
 757 endif # Windows
 758
 759 ifneq "$(BINDIST)" "YES"
 760 $(ghc-prim-$(libraries/ghc-prim_dist-install_VERSION)_HADDOCK_FILE): \
 761     libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs \
 762     libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs
 763 endif # BINDIST
 764
 765 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
 766                             $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) \
 767                           | $$(dir $$@)/.
 768         "$(GENPRIMOP_INPLACE)" --make-haskell-source < $< > $@
 769
 770 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs: \
 771                             $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) \
 772                           | $$(dir $$@)/.
 773         "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers < $< > $@
 774
 775 .PHONY: tags
 776 tags: tags_compiler
 777
 778 .PHONY: TAGS
 779 TAGS: TAGS_compiler
 780
 781 # -----------------------------------------------------------------------------
 782 # Installation
 783
 784 install: install_packages install_libs install_libexecs install_headers \
 785          install_libexec_scripts install_bins install_docs \
 786                  install_topdirs
 787
 788 install_bins: $(INSTALL_BINS)
 789         $(INSTALL_DIR) "$(DESTDIR)$(bindir)"
 790         for i in $(INSTALL_BINS); do \
 791                 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(bindir)" ;  \
 792         done
 793
 794 install_libs: $(INSTALL_LIBS)
 795         $(INSTALL_DIR) "$(DESTDIR)$(ghclibdir)"
 796         for i in $(INSTALL_LIBS); do \
 797                 case $$i in \
 798                   *.a) \
 799                     $(INSTALL_DATA) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)"; \
 800                     $(RANLIB) $(DESTDIR)$(ghclibdir)/`basename $$i` ;; \
 801                   *.dll) \
 802                     $(INSTALL_DATA) -s $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)" ;; \
 803                   *.so) \
 804                     $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)" ;; \
 805                   *.dylib) \
 806                     $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)";; \
 807                   *) \
 808                     $(INSTALL_DATA) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)"; \
 809                 esac; \
 810         done
 811
 812 install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS)
 813 ifeq "$(INSTALL_LIBEXEC_SCRIPTS)" ""
 814         @:
 815 else
 816         $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)"
 817         for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
 818                 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)"; \
 819         done
 820 endif
 821
 822 install_libexecs:  $(INSTALL_LIBEXECS)
 823 ifeq "$(INSTALL_LIBEXECS)" ""
 824         @:
 825 else
 826         $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)"
 827         for i in $(INSTALL_LIBEXECS); do \
 828                 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)"; \
 829         done
 830 # We rename ghc-stage2, so that the right program name is used in error
 831 # messages etc.
 832         "$(MV)" "$(DESTDIR)$(ghclibexecdir)/ghc-stage2" "$(DESTDIR)$(ghclibexecdir)/ghc"
 833 endif
 834
 835 install_topdirs: $(INSTALL_TOPDIRS)
 836         $(INSTALL_DIR) "$(DESTDIR)$(topdir)"
 837         for i in $(INSTALL_TOPDIRS); do \
 838                 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(topdir)"; \
 839         done
 840
 841 install_headers: $(INSTALL_HEADERS)
 842         $(INSTALL_DIR) "$(DESTDIR)$(ghcheaderdir)"
 843         for i in $(INSTALL_HEADERS); do \
 844                 $(INSTALL_HEADER) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghcheaderdir)"; \
 845         done
 846
 847 install_docs: $(INSTALL_DOCS)
 848         $(INSTALL_DIR) "$(DESTDIR)$(docdir)"
 849 ifneq "$(INSTALL_DOCS)" ""
 850         for i in $(INSTALL_DOCS); do \
 851                 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)"; \
 852         done
 853 endif
 854         $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html"
 855         $(INSTALL_DOC) $(INSTALL_OPTS) docs/index.html "$(DESTDIR)$(docdir)/html"
 856 ifneq "$(INSTALL_LIBRARY_DOCS)" ""
 857         $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html/libraries"
 858         for i in $(INSTALL_LIBRARY_DOCS); do \
 859                 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)/html/libraries/"; \
 860         done
 861         $(INSTALL_DATA) $(INSTALL_OPTS) libraries/prologue.txt "$(DESTDIR)$(docdir)/html/libraries/"
 862         $(INSTALL_SCRIPT) $(INSTALL_OPTS) libraries/gen_contents_index "$(DESTDIR)$(docdir)/html/libraries/"
 863 endif
 864 ifneq "$(INSTALL_HTML_DOC_DIRS)" ""
 865         for i in $(INSTALL_HTML_DOC_DIRS); do \
 866                 $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html/`basename $$i`"; \
 867                 $(INSTALL_DOC) $(INSTALL_OPTS) $$i/* "$(DESTDIR)$(docdir)/html/`basename $$i`"; \
 868         done
 869 endif
 870
 871 INSTALLED_PACKAGE_CONF=$(DESTDIR)$(topdir)/package.conf.d
 872
 873 # Install packages in the right order, so that ghc-pkg doesn't complain.
 874 # Also, install ghc-pkg first.
 875 ifeq "$(Windows)" "NO"
 876 INSTALLED_GHC_REAL=$(DESTDIR)$(ghclibexecdir)/ghc
 877 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(ghclibexecdir)/ghc-pkg
 878 else
 879 INSTALLED_GHC_REAL=$(DESTDIR)$(bindir)/ghc.exe
 880 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
 881 endif
 882
 883 INSTALLED_PACKAGES := $(filter-out haskeline mtl terminfo utf8-string xhtml,$(PACKAGES))
 884 ifeq "$(InstallExtraPackages)" "NO"
 885 INSTALLED_PACKAGES := $(filter-out $(EXTRA_PACKAGES), $(INSTALLED_PACKAGES))
 886 endif
 887
 888 HIDDEN_PACKAGES = binary
 889
 890 define set_INSTALL_DISTDIR
 891 # $1 = libraries/base, $2 = dist-install
 892 # =>
 893 # INSTALL_DISTDIR_libraries/base = dist-install
 894 INSTALL_DISTDIR_$1 = $2
 895 endef
 896
 897 $(eval $(foreach p,$(INSTALLED_PACKAGES) $(PACKAGES_STAGE2),\
 898 $(call set_INSTALL_DISTDIR,libraries/$p,dist-install)))
 899 INSTALL_DISTDIR_compiler = stage2
 900
 901 ALL_INSTALLED_PACKAGES = $(addprefix libraries/,$(INSTALLED_PACKAGES)) \
 902                          compiler \
 903                          $(addprefix libraries/,$(PACKAGES_STAGE2))
 904
 905 install_packages: install_libexecs
 906 install_packages: libffi/package.conf.install rts/package.conf.install
 907         $(INSTALL_DIR) "$(DESTDIR)$(topdir)"
 908         "$(RM)" $(RM_OPTS_REC) "$(INSTALLED_PACKAGE_CONF)"
 909         $(INSTALL_DIR) "$(INSTALLED_PACKAGE_CONF)"
 910         "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf "$(INSTALLED_PACKAGE_CONF)" update libffi/package.conf.install
 911         "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf "$(INSTALLED_PACKAGE_CONF)" update rts/package.conf.install
 912         $(foreach p, $(ALL_INSTALLED_PACKAGES),\
 913             "$(GHC_CABAL_INPLACE)" install \
 914                  "$(INSTALLED_GHC_REAL)" \
 915                  "$(INSTALLED_GHC_PKG_REAL)" \
 916                  "$(STRIP_CMD)" \
 917                  "$(DESTDIR)$(topdir)" \
 918                  $p $(INSTALL_DISTDIR_$p) \
 919                  '$(DESTDIR)' '$(prefix)' '$(ghclibdir)' '$(docdir)/html/libraries' \
 920                  $(RelocatableBuild) &&) true
 921         $(foreach p, $(HIDDEN_PACKAGES),\
 922             "$(INSTALLED_GHC_PKG_REAL)" --global-conf "$(INSTALLED_PACKAGE_CONF)" \
 923                                       hide $p &&) true
 924
 925 # -----------------------------------------------------------------------------
 926 # Binary distributions
 927
 928 ifneq "$(CLEANING)" "YES"
 929 # This rule seems to hold some files open on Windows which prevents
 930 # cleaning, perhaps due to the $(wildcard).
 931
 932 $(eval $(call bindist,.,\
 933     LICENSE \
 934     README \
 935     INSTALL \
 936     configure config.sub config.guess install-sh \
 937     extra-gcc-opts.in \
 938     Makefile \
 939     mk/config.mk.in \
 940     $(INPLACE_BIN)/mkdirhier \
 941     $(INPLACE_BIN)/ghc-cabal \
 942     utils/ghc-pwd/ghc-pwd \
 943         $(BINDIST_WRAPPERS) \
 944         $(BINDIST_PERL_SOURCES) \
 945         $(BINDIST_LIBS) \
 946         $(BINDIST_HI) \
 947         $(BINDIST_EXTRAS) \
 948         $(includes_H_CONFIG) \
 949         $(includes_H_PLATFORM) \
 950     $(includes_H_FILES) \
 951         includes/ghcconfig.h \
 952         includes/rts/Config.h \
 953     $(INSTALL_HEADERS) \
 954     $(INSTALL_LIBEXECS) \
 955     $(INSTALL_LIBEXEC_SCRIPTS) \
 956     $(INSTALL_TOPDIRS) \
 957     $(INSTALL_BINS) \
 958     $(INSTALL_MANPAGES) \
 959     $(INSTALL_DOCS) \
 960     $(INSTALL_LIBRARY_DOCS) \
 961     $(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \
 962         docs/index.html \
 963         compiler/stage2/doc \
 964         $(wildcard libraries/*/dist-install/doc/) \
 965         $(wildcard libraries/*/*/dist-install/doc/) \
 966     $(filter-out extra-gcc-opts,$(INSTALL_LIBS)) \
 967     $(filter-out %/project.mk mk/config.mk %/mk/install.mk,$(MAKEFILE_LIST)) \
 968         mk/project.mk \
 969         mk/install.mk.in \
 970         bindist.mk \
 971         libraries/gen_contents_index \
 972         libraries/prologue.txt \
 973         libraries/dph/LICENSE \
 974  ))
 975 endif
 976 # mk/project.mk gets an absolute path, so we manually include it in
 977 # the bindist with a relative path
 978
 979 BIN_DIST_MK = $(BIN_DIST_PREP_DIR)/bindist.mk
 980
 981 unix-binary-dist-prep:
 982         "$(RM)" $(RM_OPTS_REC) bindistprep/
 983         "$(MKDIRHIER)" $(BIN_DIST_PREP_DIR)
 984         set -e; for i in LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh extra-gcc-opts.in ghc.mk inplace distrib/configure.ac distrib/README distrib/INSTALL; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done
 985         echo "HADDOCK_DOCS       = $(HADDOCK_DOCS)"       >> $(BIN_DIST_MK)
 986         echo "LATEX_DOCS         = $(LATEX_DOCS)"         >> $(BIN_DIST_MK)
 987         echo "BUILD_DOCBOOK_HTML = $(BUILD_DOCBOOK_HTML)" >> $(BIN_DIST_MK)
 988         echo "BUILD_DOCBOOK_PS   = $(BUILD_DOCBOOK_PS)"   >> $(BIN_DIST_MK)
 989         echo "BUILD_DOCBOOK_PDF  = $(BUILD_DOCBOOK_PDF)"  >> $(BIN_DIST_MK)
 990         echo "BUILD_MAN          = $(BUILD_MAN)"          >> $(BIN_DIST_MK)
 991         cd $(BIN_DIST_PREP_DIR) && autoreconf
 992         "$(RM)" $(RM_OPTS) $(BIN_DIST_PREP_TAR)
 993 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
 994 # tree then we want to include the real file, not a symlink to it
 995         cd bindistprep && "$(TAR_CMD)" hcf - -T ../$(BIN_DIST_LIST) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
 996
 997 windows-binary-dist-prep:
 998         "$(RM)" $(RM_OPTS_REC) bindistprep/
 999         $(MAKE) prefix=$(TOP)/$(BIN_DIST_PREP_DIR) install
1000         cd bindistprep && "$(TAR_CMD)" cf - $(BIN_DIST_NAME) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
1001
1002 windows-installer:
1003 ifeq "$(ISCC)" ""
1004         @echo No ISCC, so not making installer
1005 else
1006         "$(ISCC)" /O. /Fbindistprep/$(WINDOWS_INSTALLER_BASE) - < distrib/ghc.iss
1007 endif
1008
1009 # tryTimes tries to run its third argument multiple times, until it
1010 # succeeds. Don't call it directly; call try10Times instead.
1011 # The first and second argument to tryTimes are lists of values.
1012 # The length of the first argument is the number of times we have
1013 # already tried. The length of the second argument is the number more
1014 # times we will try.
1015 tryTimes = $(if $2, \
1016                 { echo 'Try $(words x $1): $3' ; $3 ; } || \
1017                 $(call tryTimes,x $1,$(wordlist 2,$(words $2),$2),$3), \
1018                 )
1019
1020 # Try to run the argument 10 times. If all 10 fail, fail.
1021 try10Times = $(call tryTimes,,x x x x x x x x x x,$1) { echo Failed; false; }
1022
1023 .PHONY: publish-binary-dist
1024 publish-binary-dist:
1025         $(call try10Times,$(PublishCp) $(BIN_DIST_TAR_BZ2) $(PublishLocation)/dist)
1026 ifeq "$(mingw32_TARGET_OS)" "1"
1027         $(call try10Times,$(PublishCp) $(WINDOWS_INSTALLER) $(PublishLocation)/dist)
1028 endif
1029
1030 .PHONY: publish-docs
1031 publish-docs:
1032         $(call try10Times,$(PublishCp) -r bindisttest/installed/share/doc/ghc/* $(PublishLocation)/docs)
1033
1034 # -----------------------------------------------------------------------------
1035 # Source distributions
1036
1037 # Do it like this:
1038 #
1039 #       $ make
1040 #       $ make sdist
1041 #
1042
1043 # A source dist is built from a complete build tree, because we
1044 # require some extra files not contained in a darcs checkout: the
1045 # output from Happy and Alex, for example.
1046 #
1047 # The steps performed by 'make dist' are as follows:
1048 #   - create a complete link-tree of the current build tree in /tmp
1049 #   - run 'make distclean' on that tree
1050 #   - remove a bunch of other files that we know shouldn't be in the dist
1051 #   - tar up first the extralibs package, then the main source package
1052
1053 #
1054 # Directory in which we're going to build the src dist
1055 #
1056 SRC_DIST_NAME=ghc-$(ProjectVersion)
1057 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
1058
1059 #
1060 # Files to include in source distributions
1061 #
1062 SRC_DIST_DIRS = mk rules docs distrib bindisttest libffi includes utils docs rts compiler ghc driver libraries ghc-tarballs
1063 SRC_DIST_FILES += \
1064         configure.ac config.guess config.sub configure \
1065         aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
1066         ghc.spec.in ghc.spec extra-gcc-opts.in VERSION \
1067         boot boot-pkgs packages ghc.mk
1068
1069 SRC_DIST_TARBALL = $(SRC_DIST_NAME)-src.tar.bz2
1070
1071 VERSION :
1072         echo $(ProjectVersion) >VERSION
1073
1074 sdist : VERSION
1075
1076 # Use:
1077 #     $(call sdist_file,compiler,stage2,cmm,Foo/Bar,CmmLex,x)
1078 # to copy the generated file that replaces compiler/cmm/Foo/Bar/CmmLex.x, where
1079 # "stage2" is the dist dir.
1080 define sdist_file
1081         "$(CP)" $1/$2/build/$4/$5.hs $(SRC_DIST_DIR)/$1/$3/$4
1082         mv $(SRC_DIST_DIR)/$1/$3/$4/$5.$6 $(SRC_DIST_DIR)/$1/$3/$4/$5.$6.source
1083 endef
1084
1085 .PHONY: sdist-prep
1086 sdist-prep :
1087         "$(RM)" $(RM_OPTS_REC) $(SRC_DIST_DIR)
1088         "$(RM)" $(RM_OPTS) $(SRC_DIST_TARBALL)
1089         mkdir $(SRC_DIST_DIR)
1090         cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_DIRS); do mkdir $$i; ( cd $$i && lndir $(TOP)/$$i ); done
1091         cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_FILES); do $(LN_S) $(TOP)/$$i .; done
1092         cd $(SRC_DIST_DIR) && $(MAKE) distclean
1093         rm -rf $(SRC_DIST_DIR)/libraries/tarballs/
1094         rm -rf $(SRC_DIST_DIR)/libraries/stamp/
1095         $(call sdist_file,compiler,stage2,cmm,,CmmLex,x)
1096         $(call sdist_file,compiler,stage2,cmm,,CmmParse,y)
1097         $(call sdist_file,compiler,stage2,parser,,Lexer,x)
1098         $(call sdist_file,compiler,stage2,parser,,Parser,y.pp)
1099         $(call sdist_file,compiler,stage2,parser,,ParserCore,y)
1100         $(call sdist_file,utils/hpc,dist,,,HpcParser,y)
1101         $(call sdist_file,utils/genprimopcode,dist,,,Lexer,x)
1102         $(call sdist_file,utils/genprimopcode,dist,,,Parser,y)
1103         $(call sdist_file,utils/haddock,dist,src,Haddock,Lex,x)
1104         $(call sdist_file,utils/haddock,dist,src,Haddock,Parse,y)
1105         cd $(SRC_DIST_DIR) && "$(RM)" $(RM_OPTS_REC) compiler/stage[123] mk/build.mk
1106         cd $(SRC_DIST_DIR) && "$(FIND)" $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" -o -name "*-darcs-backup*" \) -print | "$(XARGS)" $(XARGS_OPTS) "$(RM)" $(RM_OPTS_REC)
1107
1108 .PHONY: sdist
1109 sdist : sdist-prep
1110         "$(TAR_CMD)" chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(TOP)/$(SRC_DIST_TARBALL)
1111
1112 sdist-manifest : $(SRC_DIST_TARBALL)
1113         tar tjf $(SRC_DIST_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest
1114
1115 # Upload the distribution(s)
1116 # Retrying is to work around buggy firewalls that corrupt large file transfers
1117 # over SSH.
1118 ifneq "$(PublishLocation)" ""
1119 publish-sdist :
1120         $(call try10Times,$(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist)
1121 endif
1122
1123 ifeq "$(BootingFromHc)" "YES"
1124 # In a normal build we use GHC to compile C files (see
1125 # rules/c-suffix-rules.mk), which passes a number of its own options
1126 # to the C compiler.  So when bootstrapping we have to provide these
1127 # flags explicitly to C compilations.
1128 SRC_CC_OPTS += -DNO_REGS -DUSE_MINIINTERPRETER
1129 SRC_CC_OPTS += -D__GLASGOW_HASKELL__=$(ProjectVersionInt)
1130 SRC_CC_OPTS += -I$(GHC_INCLUDE_DIR)
1131 endif
1132
1133 # -----------------------------------------------------------------------------
1134 # sdisting libraries
1135
1136 # Use manually, with e.g.:
1137 #     make sdist_directory
1138
1139 sdist_%:
1140         inplace/bin/ghc-cabal sdist libraries/$* dist-install
1141
1142 # -----------------------------------------------------------------------------
1143 # Cleaning
1144
1145 .PHONY: clean
1146
1147 CLEAN_FILES += utils/ghc-pwd/ghc-pwd
1148 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.exe
1149 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.hi
1150 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.o
1151 CLEAN_FILES += libraries/bootstrapping.conf
1152 CLEAN_FILES += libraries/integer-gmp/cbits/GmpDerivedConstants.h
1153 CLEAN_FILES += libraries/integer-gmp/cbits/mkGmpDerivedConstants
1154
1155 clean : clean_files clean_libraries
1156
1157 .PHONY: clean_files
1158 clean_files :
1159         "$(RM)" $(RM_OPTS) $(CLEAN_FILES)
1160
1161 ifneq "$(NO_CLEAN_GMP)" "YES"
1162 CLEAN_FILES += libraries/integer-gmp/gmp/gmp.h
1163 CLEAN_FILES += libraries/integer-gmp/gmp/libgmp.a
1164
1165 clean : clean_gmp
1166 .PHONY: clean_gmp
1167 clean_gmp:
1168         "$(RM)" $(RM_OPTS_REC) libraries/integer-gmp/gmp/objs
1169         "$(RM)" $(RM_OPTS_REC) libraries/integer-gmp/gmp/gmpbuild
1170 endif
1171
1172 .PHONY: clean_libraries
1173 clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES) $(PACKAGES_STAGE2))
1174 clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(BOOT_PKGS))
1175
1176 clean_libraries:
1177         "$(RM)" $(RM_OPTS_REC) $(patsubst %, libraries/%/dist, $(PACKAGES) $(PACKAGES_STAGE2))
1178         "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/*.buildinfo, $(PACKAGES) $(PACKAGES_STAGE2))
1179
1180 # We have to define a clean target for each library manually, because the
1181 # libraries/*/ghc.mk files are not included when we're cleaning.
1182 ifeq "$(CLEANING)" "YES"
1183 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),\
1184   $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install)))
1185 endif
1186
1187 clean : clean_bindistprep
1188 .PHONY: clean_bindistprep
1189 clean_bindistprep:
1190         "$(RM)" $(RM_OPTS_REC) bindistprep/
1191
1192 distclean : clean
1193         "$(RM)" $(RM_OPTS) config.cache config.status config.log mk/config.h mk/stamp-h
1194         "$(RM)" $(RM_OPTS) mk/config.mk mk/are-validating.mk mk/project.mk
1195         "$(RM)" $(RM_OPTS) mk/config.mk.old mk/project.mk.old
1196         "$(RM)" $(RM_OPTS) extra-gcc-opts docs/users_guide/ug-book.xml
1197         "$(RM)" $(RM_OPTS) compiler/ghc.cabal compiler/ghc.cabal.old
1198         "$(RM)" $(RM_OPTS) ghc/ghc-bin.cabal
1199         "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h
1200         "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h
1201         "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h
1202         "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h
1203         "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h
1204
1205         "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.log, $(PACKAGES) $(PACKAGES_STAGE2))
1206         "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.status, $(PACKAGES) $(PACKAGES_STAGE2))
1207         "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES) $(PACKAGES_STAGE2))
1208         "$(RM)" $(RM_OPTS_REC) $(patsubst %, libraries/%/autom4te.cache, $(PACKAGES) $(PACKAGES_STAGE2))
1209
1210 maintainer-clean : distclean
1211         "$(RM)" $(RM_OPTS) configure mk/config.h.in
1212         "$(RM)" $(RM_OPTS_REC) autom4te.cache libraries/*/autom4te.cache
1213         "$(RM)" $(RM_OPTS) ghc.spec
1214         "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/GNUmakefile, \
1215                 $(PACKAGES) $(PACKAGES_STAGE2))
1216         "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/ghc.mk, $(PACKAGES) $(PACKAGES_STAGE2))
1217         "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/configure, \
1218                 $(PACKAGES) $(PACKAGES_STAGE2))
1219         "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h.in
1220         "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h.in
1221         "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h.in
1222         "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h.in
1223         "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h.in
1224
1225 .PHONY: all_libraries
1226
1227 .PHONY: bootstrapping-files
1228 bootstrapping-files: $(OTHER_LIBS)
1229 bootstrapping-files: includes/ghcautoconf.h
1230 bootstrapping-files: includes/DerivedConstants.h
1231 bootstrapping-files: includes/GHCConstants.h
1232
1233 .DELETE_ON_ERROR:
1234