1 # -----------------------------------------------------------------------------
3 # (c) 2009 The University of Glasgow
5 # This file is part of the GHC build system.
7 # To understand how the build system works and how to modify it, see
8 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture
9 # http://hackage.haskell.org/trac/ghc/wiki/Building/Modifying
11 # -----------------------------------------------------------------------------
15 # * remove old Makefiles, add new stubs for building in subdirs
17 # * docs/docbook-cheat-sheet/Makefile
18 # * docs/ext-core/Makefile
20 # * docs/storage-mgmt/Makefile
22 # * rts/dotnet/Makefile
24 # * add Makefiles for the rest of the utils/ programs that aren't built
25 # by default (need to exclude them from 'make all' too)
29 # * per-source-file dependencies instead of one .depend file?
30 # * eliminate undefined variables, and use --warn-undefined-variables?
31 # * put outputs from different ways in different subdirs of distdir/build,
32 # then we don't have to use -osuf/-hisuf. We would have to install
33 # them in different places too, so we'd need ghc-pkg support for packages
35 # * make PACKAGES generated by './configure' or './boot'?
36 # * we should use a directory of package.conf files rather than a single
37 # file for the inplace package database, so that we can express
38 # dependencies more accurately. Otherwise it's possible to get into
39 # a state where the package database is out of date, and the build
40 # system doesn't know.
42 # Approximate build order.
44 # The actual build order is defined by dependencies, and the phase
45 # ordering used to ensure correct ordering of makefile-generation; see
46 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
48 # * With bootstrapping compiler:
49 # o Build utils/ghc-cabal
50 # o Build utils/ghc-pkg
51 # o Build utils/hsc2hs
53 # o configure, generate package-data.mk and inplace-pkg-info
54 # o register each package into inplace/lib/package.conf
56 # * With bootstrapping compiler:
57 # o Build libraries/{filepath,hpc,extensible-exceptions,Cabal}
58 # o Build compiler (stage 1)
62 # o Build utils/* (except haddock)
63 # o Build compiler (stage 2)
65 # o Build utils/haddock
66 # o Build compiler (stage 3) (optional)
71 .PHONY: default all haddock
73 # We need second expansion for the way we handle directories, so that
75 # expands to the directory of a rule that uses a % pattern.
80 # Catch make if it runs away into an infinite loop
81 ifeq "$(MAKE_RESTARTS)" ""
82 else ifeq "$(MAKE_RESTARTS)" "1"
83 else ifeq "$(MAKE_RESTARTS)" "2"
85 $(error Make has restarted itself $(MAKE_RESTARTS) times; is there a makefile bug?)
88 # Just bring makefiles up to date:
89 .PHONY: just-makefiles
93 ifneq "$(CLEANING)" "YES"
97 # -----------------------------------------------------------------------------
101 space=$(nothing) $(nothing)
104 # Cancel all suffix rules. Ideally we'd like to have 'make -r' turned on
105 # by default, because that disables all the implicit rules, but there doesn't
106 # seem to be a good way to do that. This turns off all the old-style suffix
107 # rules, which does half the job and speeds up make quite a bit:
110 # -----------------------------------------------------------------------------
113 # to see the effective value used for a Makefile variable, do
114 # make show VALUE=MY_VALUE
118 @echo '$(VALUE)="$($(VALUE))"'
120 # -----------------------------------------------------------------------------
121 # Include subsidiary build-system bits
125 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
127 ifeq "$(ProjectVersion)" ""
128 $(error Please run ./configure first)
134 # (Optional) build-specific configuration
135 include mk/custom-settings.mk
137 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
138 ifeq "$(GhcLibWays)" ""
139 $(error $$(GhcLibWays) is empty, it must contain at least one way)
143 # -----------------------------------------------------------------------------
144 # Utility definitions
146 include rules/trace.mk
147 include rules/make-command.mk
149 # -----------------------------------------------------------------------------
150 # Macros for standard targets
152 include rules/all-target.mk
153 include rules/clean-target.mk
155 # -----------------------------------------------------------------------------
158 $(eval $(call clean-target,inplace,,inplace))
160 # -----------------------------------------------------------------------------
161 # Whether to build dependencies or not
163 # When we're just doing 'make clean' or 'make show', then we don't need
164 # to build dependencies.
166 ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
167 NO_INCLUDE_DEPS = YES
168 NO_INCLUDE_PKGDATA = YES
170 ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
171 NO_INCLUDE_DEPS = YES
172 NO_INCLUDE_PKGDATA = YES
174 ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
175 NO_INCLUDE_DEPS = YES
176 # We want package-data.mk for show
179 # -----------------------------------------------------------------------------
182 include rules/way-prelims.mk
184 $(foreach way,$(ALL_WAYS),\
185 $(eval $(call way-prelims,$(way))))
187 # -----------------------------------------------------------------------------
190 include rules/distdir-way-opts.mk
192 # -----------------------------------------------------------------------------
193 # Finding source files and object files
195 include rules/hs-sources.mk
196 include rules/c-sources.mk
197 include rules/includes-sources.mk
198 include rules/hs-objs.mk
199 include rules/c-objs.mk
200 include rules/cmm-objs.mk
202 # -----------------------------------------------------------------------------
205 # Suffix rules cause "make clean" to fail on Windows (trac #3233)
206 # so we don't make any when cleaning.
207 ifneq "$(CLEANING)" "YES"
209 include rules/hs-suffix-rules-srcdir.mk
210 include rules/hs-suffix-rules.mk
211 include rules/hi-rule.mk
213 $(foreach way,$(ALL_WAYS),\
214 $(eval $(call hi-rule,$(way))))
216 include rules/c-suffix-rules.mk
217 include rules/cmm-suffix-rules.mk
221 # -----------------------------------------------------------------------------
222 # Building package-data.mk files from .cabal files
224 include rules/package-config.mk
226 # -----------------------------------------------------------------------------
227 # Building dependencies
229 include rules/build-dependencies.mk
231 # -----------------------------------------------------------------------------
232 # Build package-data.mk files
234 include rules/build-package-data.mk
236 # -----------------------------------------------------------------------------
237 # Build and install a program
239 include rules/build-prog.mk
240 include rules/shell-wrapper.mk
242 # -----------------------------------------------------------------------------
243 # Build a perl script
245 include rules/build-perl.mk
247 # -----------------------------------------------------------------------------
250 include rules/build-package.mk
251 include rules/build-package-way.mk
252 include rules/haddock.mk
253 include rules/tags-package.mk
254 include rules/extra-packages.mk
256 # -----------------------------------------------------------------------------
257 # Registering hand-written package descriptions (used in libffi and rts)
259 include rules/manual-package-config.mk
261 # -----------------------------------------------------------------------------
264 include rules/docbook.mk
266 # -----------------------------------------------------------------------------
269 include rules/bindist.mk
271 # -----------------------------------------------------------------------------
274 # Don't try to delete directories:
277 # Create build directories on demand. NB. the | below: this indicates
278 # that $(MKDIRHIER) is an order-only dependency, which means that this
279 # rule fires after building mkdirhier, but we won't try to recreate
280 # directories if mkdirhier changes.
284 # -----------------------------------------------------------------------------
287 # --------------------------------
288 # Subsets of packages
290 # Packages that are built but not installed
291 INTREE_ONLY_PACKAGES := haskeline mtl terminfo utf8-string xhtml
293 # Packages that, if present, must be built by the stage2 compiler,
294 # because they use TH and/or annotations, or depend on other stage2
296 STAGE2_PACKAGES := dph/dph-base dph/dph-prim-interface dph/dph-prim-seq \
297 dph/dph-common dph/dph-prim-par dph/dph-par dph/dph-seq
299 # Packages that are built by stage0, in addition to stage1. These
300 # packages are dependencies of GHC, that we do not assume the stage0
301 # compiler already has installed (or up-to-date enough).
303 # We assume that the stage0 compiler has a suitable bytestring package,
304 # so we don't have to include it below.
305 STAGE0_PACKAGES = Cabal hpc extensible-exceptions binary bin-package-db
307 # --------------------------------
308 # Building the lists of packages
310 # We need to build two lists:
312 # $(PACKAGES) A list of directories relative to libraries/ containing
313 # packages that will be built by stage1, in dependency
316 # $(PACKAGES_STAGE2) Ditto, for stage2.
319 define addPackageGeneral
320 # args: $1 = PACKAGES variable, $2 = package, $3 = condition
324 ifeq "$$(CLEANING)" "YES"
334 define addPackage # args: $1 = package, $2 = condition
335 ifeq "$(filter $1,$(STAGE2_PACKAGES))" "$1"
336 $(call addPackageGeneral,PACKAGES_STAGE2,$1,$2)
338 $(call addPackageGeneral,PACKAGES,$1,$2)
342 $(eval $(call addPackage,ghc-prim))
343 ifeq "$(CLEANING)" "YES"
344 $(eval $(call addPackage,integer-gmp))
345 $(eval $(call addPackage,integer-simple))
347 $(eval $(call addPackage,$(INTEGER_LIBRARY)))
349 $(eval $(call addPackage,base))
350 $(eval $(call addPackage,filepath))
351 $(eval $(call addPackage,array))
352 $(eval $(call addPackage,bytestring))
353 $(eval $(call addPackage,containers))
355 $(eval $(call addPackage,Win32,($$(Windows),YES)))
356 $(eval $(call addPackage,unix,($$(Windows),NO)))
358 $(eval $(call addPackage,old-locale))
359 $(eval $(call addPackage,old-time))
360 $(eval $(call addPackage,time))
361 $(eval $(call addPackage,directory))
362 $(eval $(call addPackage,process))
363 $(eval $(call addPackage,random))
364 $(eval $(call addPackage,extensible-exceptions))
365 $(eval $(call addPackage,haskell98))
366 $(eval $(call addPackage,haskell2010))
367 $(eval $(call addPackage,hpc))
368 $(eval $(call addPackage,pretty))
369 $(eval $(call addPackage,template-haskell))
370 $(eval $(call addPackage,Cabal))
371 $(eval $(call addPackage,binary))
372 $(eval $(call addPackage,bin-package-db))
373 $(eval $(call addPackage,mtl))
374 $(eval $(call addPackage,utf8-string))
375 $(eval $(call addPackage,xhtml))
377 $(eval $(call addPackage,terminfo,($$(Windows),NO)))
379 $(eval $(call addPackage,haskeline))
381 $(eval $(call extra-packages))
383 # -------------------------------------------
384 # Dependencies between package-data.mk files
386 # We cannot run ghc-cabal to configure a package until we have
387 # configured and registered all of its dependencies. So the following
388 # hack forces all the configure steps to happen in exactly the following order:
390 # $(PACKAGES) ghc(stage2) $(PACKAGES_STAGE2)
392 # Ideally we should use the correct dependencies here to allow more
393 # parallelism, but we don't know the dependencies until we've
394 # generated the pacakge-data.mk files.
396 libraries/$1/$2/package-data.mk : $$(GHC_PKG_INPLACE) $$(fixed_pkg_prev)
397 fixed_pkg_prev:=libraries/$1/$2/package-data.mk
400 ifneq "$(BINDIST)" "YES"
402 $(foreach pkg,$(PACKAGES),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
404 # the GHC package doesn't live in libraries/, so we add its dependency manually:
405 compiler/stage2/package-data.mk: $(fixed_pkg_prev)
406 fixed_pkg_prev:=compiler/stage2/package-data.mk
408 # and continue with PACKAGES_STAGE2, which depend on GHC:
409 $(foreach pkg,$(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
411 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
412 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
413 # haddock depends on ghc and some libraries, but depending on GHC's
414 # package-data.mk is sufficient, as that in turn depends on all the
416 utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
418 utils/ghc-pkg/dist-install/package-data.mk: compiler/stage2/package-data.mk
419 utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
420 utils/compare_sizes/dist/package-data.mk: compiler/stage2/package-data.mk
422 # add the final two package.conf dependencies: ghc-prim depends on RTS,
423 # and RTS depends on libffi.
424 libraries/ghc-prim/dist-install/package-data.mk : rts/package.conf.inplace
425 rts/package.conf.inplace : libffi/package.conf.inplace
428 # --------------------------------
429 # Misc package-related settings
431 BOOT_PKG_CONSTRAINTS := $(foreach p,$(STAGE0_PACKAGES),--constraint "$p == $(shell grep -i "^Version:" libraries/$p/$p.cabal | sed "s/[^0-9.]//g")")
433 # The actual .a and .so/.dll files: needed for dependencies.
434 ALL_STAGE1_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_v_LIB))
435 ifeq "$(BuildSharedLibs)" "YES"
436 ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_dyn_LIB))
438 BOOT_LIBS = $(foreach lib,$(STAGE0_PACKAGES),$(libraries/$(lib)_dist-boot_v_LIB))
439 # A useful pseudo-target
441 stage1_libs : $(ALL_STAGE1_LIBS)
443 OTHER_LIBS = libffi/dist-install/build/libHSffi$(v_libsuf) libffi/dist-install/build/HSffi.o
444 ifeq "$(BuildSharedLibs)" "YES"
445 OTHER_LIBS += libffi/dist-install/build/libHSffi$(dyn_libsuf)
448 # ----------------------------------------
449 # Special magic for the ghc-prim package
451 # We want the ghc-prim package to include the GHC.Prim module when it
452 # is registered, but not when it is built, because GHC.Prim is not a
453 # real source module, it is built-in to GHC. The old build system did
454 # this using Setup.hs, but we can't do that here, so we have a flag to
455 # enable GHC.Prim in the .cabal file (so that the ghc-prim package
456 # remains compatible with the old build system for the time being).
457 # GHC.Prim module in the ghc-prim package with a flag:
459 libraries/ghc-prim_CONFIGURE_OPTS += --flag=include-ghc-prim
461 # And then we strip it out again before building the package:
462 define libraries/ghc-prim_PACKAGE_MAGIC
463 libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
466 PRIMOPS_TXT = $(GHC_COMPILER_DIR)/prelude/primops.txt
468 libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT) | $$(dir $$@)/.
469 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers <$(PRIMOPS_TXT) >$@
471 # Required so that Haddock documents the primops.
472 libraries/ghc-prim_dist-install_EXTRA_HADDOCK_SRCS = libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
474 # ----------------------------------------
475 # Special magic for the integer package
477 ifneq "$(CLEANING)" "YES"
478 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
479 libraries/base_dist-install_CONFIGURE_OPTS += --flags=-integer-simple
481 ifeq "$(INTEGER_LIBRARY)" "integer-simple"
482 libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-simple
484 $(error Unknown integer library: $(INTEGER_LIBRARY))
489 # -----------------------------------------------------------------------------
490 # Include build instructions from all subdirs
492 # For the rationale behind the build phases, see
493 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
495 # Setting foo_dist_DISABLE=YES means "in directory foo, for build
496 # "dist", just read the package-data.mk file, do not build anything".
498 # We carefully engineer things so that we can build the
499 # package-data.mk files early on: they depend only on a few tools also
500 # built early. Having got the package-data.mk files built, we can
501 # restart make with up-to-date information about all the packages
502 # (this is phase 0). The remaining problem is the .depend files:
504 # - .depend files in libraries need the stage 1 compiler to build
505 # - ghc/stage1/.depend needs compiler/stage1 built
506 # - compiler/stage1/.depend needs the bootstrap libs built
508 # GHC 6.11+ can build a .depend file without having built the
509 # dependencies of the package, but we can't rely on the bootstrapping
510 # compiler being able to do this, which is why we have to separate the
511 # three phases above.
513 # So this is the final ordering:
515 # Phase 0 : all package-data.mk files
516 # (requires ghc-cabal, ghc-pkg, mkdirhier, dummy-ghc etc.)
517 # Phase 1 : .depend files for bootstrap libs
519 # Phase 2 : compiler/stage1/.depend
520 # (requires bootstrap libs and genprimopcode)
521 # Phase 3 : ghc/stage1/.depend
522 # (requires compiler/stage1)
524 # The rest : libraries/*/dist-install, compiler/stage2, ghc/stage2
526 ifneq "$(BINDIST)" "YES"
535 libraries/Cabal/doc \
539 ifneq "$(GhcUnregisterised)" "YES"
545 ifneq "$(BINDIST)" "YES"
559 ifneq "$(BINDIST)" "YES"
570 ifneq "$(CLEANING)" "YES"
572 $(patsubst %, libraries/%, $(PACKAGES))
575 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
576 BUILD_DIRS += libraries/integer-gmp/gmp
588 ifeq "$(Windows)" "YES"
593 ifneq "$(BINDIST)" "YES"
595 utils/mkUserGuidePart
598 BUILD_DIRS += utils/count_lines
599 BUILD_DIRS += utils/compare_sizes
601 ifneq "$(CLEANING)" "YES"
602 # After compiler/, because these packages depend on it
604 $(patsubst %, libraries/%, $(PACKAGES_STAGE2))
607 # XXX libraries/% must come before any programs built with stage1, see
608 # Note [lib-depends].
611 $(foreach lib,$(STAGE0_PACKAGES),$(eval \
612 libraries/$(lib)_dist-boot_DISABLE = YES))
615 ifneq "$(findstring $(phase),0 1)" ""
616 # We can build deps for compiler/stage1 in phase 2
617 compiler_stage1_DISABLE = YES
620 ifneq "$(findstring $(phase),0 1 2)" ""
621 ghc_stage1_DISABLE = YES
624 ifneq "$(findstring $(phase),0 1 2 3)" ""
625 # In phases 0-3, we disable stage2-3, the full libraries and haddock
626 utils/haddock_dist_DISABLE = YES
627 utils/runghc_dist_DISABLE = YES
628 utils/ghctags_dist_DISABLE = YES
629 utils/hpc_dist_DISABLE = YES
630 utils/hsc2hs_dist-install_DISABLE = YES
631 utils/ghc-pkg_dist-install_DISABLE = YES
632 utils/mkUserGuidePart_dist_DISABLE = YES
633 utils/compare_sizes_dist_DISABLE = YES
634 compiler_stage2_DISABLE = YES
635 compiler_stage3_DISABLE = YES
636 ghc_stage2_DISABLE = YES
637 ghc_stage3_DISABLE = YES
638 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),$(eval \
639 libraries/$(lib)_dist-install_DISABLE = YES))
642 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
644 # ----------------------------------------------
645 # Per-package compiler flags
647 # If you want to add per-package compiler flags, this
648 # is the place to do it. Do it like this for package <pkg>
650 # libraries/<pkg>_dist-boot_HC_OPTS += -Wwarn
651 # libraries/<pkg>_dist-install_HC_OPTS += -Wwarn
653 # Add $(GhcLibHcOpts) to all package builds
654 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
656 # Add $(GhcBootLibHcOpts) to all stage0 package builds
657 $(foreach pkg,$(STAGE0_PACKAGES),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
659 # ----------------------------------------------
660 # Checking packages with 'cabal check'
662 ifeq "$(CHECK_PACKAGES)" "YES"
666 # These packages don't pass the Cabal checks because hs-source-dirs
667 # points outside the source directory. This isn't a real problem in
668 # these cases, so we just skip checking them.
669 CHECKED_libraries/dph/dph-seq = YES
670 CHECKED_libraries/dph/dph-par = YES
671 # In compiler's case, include-dirs points outside of the source tree
672 CHECKED_compiler = YES
674 # -----------------------------------------------
675 # Haddock-related bits
677 # Don't run Haddock for the package that will not be installed
678 $(foreach p,$(INTREE_ONLY_PACKAGES),$(eval libraries/$p_dist-install_DO_HADDOCK = NO))
679 # We don't haddock the bootstrapping libraries
680 $(foreach p,$(STAGE0_PACKAGES),$(eval libraries/$p_dist-boot_DO_HADDOCK = NO))
682 # Build the Haddock contents and index
683 ifeq "$(HADDOCK_DOCS)" "YES"
684 libraries/index.html: $(ALL_HADDOCK_FILES)
685 cd libraries && sh gen_contents_index --inplace
686 $(eval $(call all-target,library_doc_index,libraries/index.html))
687 INSTALL_LIBRARY_DOCS += libraries/*.html libraries/*.gif libraries/*.css libraries/*.js
688 CLEAN_FILES += libraries/doc-index* libraries/haddock*.css \
689 libraries/haddock*.js libraries/index*.html libraries/*.gif
692 # -----------------------------------------------------------------------------
693 # Bootstrapping libraries
695 # We need to build a few libraries with the installed GHC, since GHC itself
696 # and some of the tools depend on them:
698 ifneq "$(BINDIST)" "YES"
700 ifneq "$(BOOTSTRAPPING_CONF)" ""
701 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
702 $(shell echo "[]" >$(BOOTSTRAPPING_CONF))
706 $(eval $(call clean-target,$(BOOTSTRAPPING_CONF),,$(BOOTSTRAPPING_CONF)))
708 # These three libraries do not depend on each other, so we can build
711 $(eval $(call build-package,libraries/hpc,dist-boot,0))
712 $(eval $(call build-package,libraries/extensible-exceptions,dist-boot,0))
713 $(eval $(call build-package,libraries/Cabal,dist-boot,0))
714 $(eval $(call build-package,libraries/binary,dist-boot,0))
715 $(eval $(call build-package,libraries/bin-package-db,dist-boot,0))
717 # register the boot packages in strict sequence, because running
718 # multiple ghc-pkgs in parallel doesn't work (registrations may get
721 $(foreach pkg,$(STAGE0_PACKAGES),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
723 compiler/stage1/package-data.mk : \
724 libraries/Cabal/dist-boot/package-data.mk \
725 libraries/hpc/dist-boot/package-data.mk \
726 libraries/extensible-exceptions/dist-boot/package-data.mk \
727 libraries/bin-package-db/dist-boot/package-data.mk
729 # These are necessary because the bootstrapping compiler may not know
730 # about cross-package dependencies:
731 $(compiler_stage1_depfile_haskell) : $(BOOT_LIBS)
732 $(ghc_stage1_depfile_haskell) : $(compiler_stage1_v_LIB)
734 # A few careful dependencies between bootstrapping packages. When we
735 # can rely on the stage 0 compiler being able to generate
736 # cross-package dependencies with -M (fixed in GHC 6.12.1) we can drop
737 # these, and also some of the phases.
739 # If you miss any out here, then 'make -j8' will probably tell you.
741 libraries/bin-package-db/dist-boot/build/Distribution/InstalledPackageInfo/Binary.$(v_osuf) : libraries/binary/dist-boot/build/Data/Binary.$(v_hisuf) libraries/Cabal/dist-boot/build/Distribution/InstalledPackageInfo.$(v_hisuf)
743 # Make sure we have all the GHCi libs by the time we've built
744 # ghc-stage2. DPH includes a bit of Template Haskell which needs the
745 # GHCI libs, and we don't have a better way to express that dependency.
747 GHCI_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_GHCI_LIB)) \
748 $(compiler_stage2_GHCI_LIB)
750 ifeq "$(UseArchivesForGhci)" "NO"
751 ghc/stage2/build/tmp/$(ghc_stage2_PROG) : $(GHCI_LIBS)
756 # -----------------------------------------------------------------------------
757 # Creating a local mingw copy on Windows
759 ifeq "$(Windows)" "YES"
761 install : install_mingw
762 .PHONY: install_mingw
763 install_mingw : $(INPLACE_MINGW)
764 "$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
766 install : install_perl
768 install_perl : $(INPLACE_PERL)
769 "$(CP)" -Rp $(INPLACE_PERL) $(prefix)
773 ifneq "$(BINDIST)" "YES"
774 $(ghc-prim-$(libraries/ghc-prim_dist-install_VERSION)_HADDOCK_FILE): \
775 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs \
776 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs
779 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
780 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) \
782 "$(GENPRIMOP_INPLACE)" --make-haskell-source < $< > $@
784 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs: \
785 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) \
787 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers < $< > $@
795 # -----------------------------------------------------------------------------
798 install: install_packages install_libs install_libexecs install_headers \
799 install_libexec_scripts install_bins install_topdirs
800 ifeq "$(HADDOCK_DOCS)" "YES"
801 install: install_docs
804 install_bins: $(INSTALL_BINS)
805 $(INSTALL_DIR) "$(DESTDIR)$(bindir)"
806 for i in $(INSTALL_BINS); do \
807 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(bindir)" ; \
810 install_libs: $(INSTALL_LIBS)
811 $(INSTALL_DIR) "$(DESTDIR)$(ghclibdir)"
812 for i in $(INSTALL_LIBS); do \
815 $(INSTALL_DATA) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)"; \
816 $(RANLIB) $(DESTDIR)$(ghclibdir)/`basename $$i` ;; \
818 $(INSTALL_DATA) -s $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)" ;; \
820 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)" ;; \
822 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)";; \
824 $(INSTALL_DATA) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)"; \
828 install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS)
829 ifeq "$(INSTALL_LIBEXEC_SCRIPTS)" ""
832 $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)"
833 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
834 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)"; \
838 install_libexecs: $(INSTALL_LIBEXECS)
839 ifeq "$(INSTALL_LIBEXECS)" ""
842 $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)"
843 for i in $(INSTALL_LIBEXECS); do \
844 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)"; \
846 # We rename ghc-stage2, so that the right program name is used in error
848 "$(MV)" "$(DESTDIR)$(ghclibexecdir)/ghc-stage2" "$(DESTDIR)$(ghclibexecdir)/ghc"
851 install_topdirs: $(INSTALL_TOPDIRS)
852 $(INSTALL_DIR) "$(DESTDIR)$(topdir)"
853 for i in $(INSTALL_TOPDIRS); do \
854 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(topdir)"; \
857 install_headers: $(INSTALL_HEADERS)
858 $(INSTALL_DIR) "$(DESTDIR)$(ghcheaderdir)"
859 for i in $(INSTALL_HEADERS); do \
860 $(INSTALL_HEADER) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghcheaderdir)"; \
863 install_docs: $(INSTALL_DOCS)
864 $(INSTALL_DIR) "$(DESTDIR)$(docdir)"
865 ifneq "$(INSTALL_DOCS)" ""
866 for i in $(INSTALL_DOCS); do \
867 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)"; \
870 $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html"
871 $(INSTALL_DOC) $(INSTALL_OPTS) docs/index.html "$(DESTDIR)$(docdir)/html"
872 ifneq "$(INSTALL_LIBRARY_DOCS)" ""
873 $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html/libraries"
874 for i in $(INSTALL_LIBRARY_DOCS); do \
875 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)/html/libraries/"; \
877 $(INSTALL_DATA) $(INSTALL_OPTS) libraries/prologue.txt "$(DESTDIR)$(docdir)/html/libraries/"
878 $(INSTALL_SCRIPT) $(INSTALL_OPTS) libraries/gen_contents_index "$(DESTDIR)$(docdir)/html/libraries/"
880 ifneq "$(INSTALL_HTML_DOC_DIRS)" ""
881 for i in $(INSTALL_HTML_DOC_DIRS); do \
882 $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html/`basename $$i`"; \
883 $(INSTALL_DOC) $(INSTALL_OPTS) $$i/* "$(DESTDIR)$(docdir)/html/`basename $$i`"; \
887 INSTALLED_PACKAGE_CONF=$(DESTDIR)$(topdir)/package.conf.d
889 # Install packages in the right order, so that ghc-pkg doesn't complain.
890 # Also, install ghc-pkg first.
891 ifeq "$(Windows)" "NO"
892 INSTALLED_GHC_REAL=$(DESTDIR)$(ghclibexecdir)/ghc
893 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(ghclibexecdir)/ghc-pkg
895 INSTALLED_GHC_REAL=$(DESTDIR)$(bindir)/ghc.exe
896 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
899 INSTALLED_PACKAGES := $(filter-out $(INTREE_ONLY_PACKAGES),$(PACKAGES))
900 ifeq "$(InstallExtraPackages)" "NO"
901 INSTALLED_PACKAGES := $(filter-out $(EXTRA_PACKAGES), $(INSTALLED_PACKAGES))
904 HIDDEN_PACKAGES = binary
906 define set_INSTALL_DISTDIR
907 # $1 = libraries/base, $2 = dist-install
909 # INSTALL_DISTDIR_libraries/base = dist-install
910 INSTALL_DISTDIR_$1 = $2
913 $(eval $(foreach p,$(INSTALLED_PACKAGES) $(PACKAGES_STAGE2),\
914 $(call set_INSTALL_DISTDIR,libraries/$p,dist-install)))
915 INSTALL_DISTDIR_compiler = stage2
917 ALL_INSTALLED_PACKAGES = $(addprefix libraries/,$(INSTALLED_PACKAGES)) \
919 $(addprefix libraries/,$(PACKAGES_STAGE2))
921 install_packages: install_libexecs
922 install_packages: libffi/package.conf.install rts/package.conf.install
923 $(INSTALL_DIR) "$(DESTDIR)$(topdir)"
924 "$(RM)" $(RM_OPTS_REC) "$(INSTALLED_PACKAGE_CONF)"
925 $(INSTALL_DIR) "$(INSTALLED_PACKAGE_CONF)"
926 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf "$(INSTALLED_PACKAGE_CONF)" update libffi/package.conf.install
927 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf "$(INSTALLED_PACKAGE_CONF)" update rts/package.conf.install
928 $(foreach p, $(ALL_INSTALLED_PACKAGES), \
929 $(call make-command, \
930 "$(GHC_CABAL_INPLACE)" install \
931 "$(INSTALLED_GHC_REAL)" \
932 "$(INSTALLED_GHC_PKG_REAL)" \
934 "$(DESTDIR)$(topdir)" \
935 $p $(INSTALL_DISTDIR_$p) \
939 '$(docdir)/html/libraries' \
940 $(RelocatableBuild)))
941 $(foreach p, $(HIDDEN_PACKAGES), \
942 $(call make-command, \
943 "$(INSTALLED_GHC_PKG_REAL)" \
944 --global-conf "$(INSTALLED_PACKAGE_CONF)" hide $p))
946 # -----------------------------------------------------------------------------
947 # Binary distributions
949 ifneq "$(CLEANING)" "YES"
950 # This rule seems to hold some files open on Windows which prevents
951 # cleaning, perhaps due to the $(wildcard).
953 $(eval $(call bindist,.,\
957 configure config.sub config.guess install-sh \
962 $(INPLACE_BIN)/mkdirhier \
963 $(INPLACE_BIN)/ghc-cabal \
964 utils/ghc-pwd/ghc-pwd \
965 $(BINDIST_WRAPPERS) \
966 $(BINDIST_PERL_SOURCES) \
970 $(includes_H_CONFIG) \
971 $(includes_H_PLATFORM) \
972 $(includes_H_FILES) \
973 includes/ghcconfig.h \
974 includes/rts/Config.h \
976 $(INSTALL_LIBEXECS) \
977 $(INSTALL_LIBEXEC_SCRIPTS) \
980 $(INSTALL_MANPAGES) \
982 $(INSTALL_LIBRARY_DOCS) \
983 $(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \
985 compiler/stage2/doc \
986 $(wildcard libraries/*/dist-install/doc/) \
987 $(wildcard libraries/*/*/dist-install/doc/) \
988 $(filter-out extra-gcc-opts,$(INSTALL_LIBS)) \
989 $(filter-out %/project.mk mk/config.mk %/mk/install.mk,$(MAKEFILE_LIST)) \
993 libraries/gen_contents_index \
994 libraries/prologue.txt \
995 libraries/dph/LICENSE \
996 libraries/dph/ghc-packages \
997 libraries/dph/ghc-packages2 \
998 libraries/dph/ghc-stage2-package \
1001 # mk/project.mk gets an absolute path, so we manually include it in
1002 # the bindist with a relative path
1004 BIN_DIST_MK = $(BIN_DIST_PREP_DIR)/bindist.mk
1006 unix-binary-dist-prep:
1007 "$(RM)" $(RM_OPTS_REC) bindistprep/
1008 "$(MKDIRHIER)" $(BIN_DIST_PREP_DIR)
1009 set -e; for i in packages LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh extra-gcc-opts.in ghc.mk inplace distrib/configure.ac distrib/README distrib/INSTALL; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done
1010 echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(BIN_DIST_MK)
1011 echo "LATEX_DOCS = $(LATEX_DOCS)" >> $(BIN_DIST_MK)
1012 echo "BUILD_DOCBOOK_HTML = $(BUILD_DOCBOOK_HTML)" >> $(BIN_DIST_MK)
1013 echo "BUILD_DOCBOOK_PS = $(BUILD_DOCBOOK_PS)" >> $(BIN_DIST_MK)
1014 echo "BUILD_DOCBOOK_PDF = $(BUILD_DOCBOOK_PDF)" >> $(BIN_DIST_MK)
1015 echo "BUILD_MAN = $(BUILD_MAN)" >> $(BIN_DIST_MK)
1016 cd $(BIN_DIST_PREP_DIR) && autoreconf
1017 "$(RM)" $(RM_OPTS) $(BIN_DIST_PREP_TAR)
1018 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
1019 # tree then we want to include the real file, not a symlink to it
1020 cd bindistprep && "$(TAR_CMD)" hcf - -T ../$(BIN_DIST_LIST) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
1022 windows-binary-dist-prep:
1023 "$(RM)" $(RM_OPTS_REC) bindistprep/
1024 $(MAKE) prefix=$(TOP)/$(BIN_DIST_PREP_DIR) install
1025 cd bindistprep && "$(TAR_CMD)" cf - $(BIN_DIST_NAME) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
1028 ifeq "$(ISCC_CMD)" ""
1029 @echo No ISCC_CMD, so not making installer
1031 "$(ISCC_CMD)" /O. /Fbindistprep/$(WINDOWS_INSTALLER_BASE) - < distrib/ghc.iss
1034 # tryTimes tries to run its third argument multiple times, until it
1035 # succeeds. Don't call it directly; call try10Times instead.
1036 # The first and second argument to tryTimes are lists of values.
1037 # The length of the first argument is the number of times we have
1038 # already tried. The length of the second argument is the number more
1039 # times we will try.
1040 tryTimes = $(if $2, \
1041 { echo 'Try $(words x $1): $3' ; $3 ; } || \
1042 $(call tryTimes,x $1,$(wordlist 2,$(words $2),$2),$3), \
1045 # Try to run the argument 10 times. If all 10 fail, fail.
1046 try10Times = $(call tryTimes,,x x x x x x x x x x,$1) { echo Failed; false; }
1048 .PHONY: publish-binary-dist
1049 publish-binary-dist:
1050 $(call try10Times,$(PublishCp) $(BIN_DIST_TAR_BZ2) $(PublishLocation)/dist)
1051 ifeq "$(mingw32_TARGET_OS)" "1"
1052 $(call try10Times,$(PublishCp) $(WINDOWS_INSTALLER) $(PublishLocation)/dist)
1055 .PHONY: publish-docs
1057 $(call try10Times,$(PublishCp) -r bindisttest/installed/share/doc/ghc/* $(PublishLocation)/docs)
1059 # -----------------------------------------------------------------------------
1060 # Source distributions
1068 # A source dist is built from a complete build tree, because we
1069 # require some extra files not contained in a darcs checkout: the
1070 # output from Happy and Alex, for example.
1072 # The steps performed by 'make dist' are as follows:
1073 # - create a complete link-tree of the current build tree in /tmp
1074 # - run 'make distclean' on that tree
1075 # - remove a bunch of other files that we know shouldn't be in the dist
1076 # - tar up first the extralibs package, then the main source package
1079 # Directory in which we're going to build the src dist
1081 SRC_DIST_NAME=ghc-$(ProjectVersion)
1082 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
1085 # Files to include in source distributions
1087 SRC_DIST_DIRS = mk rules docs distrib bindisttest libffi includes utils docs rts compiler ghc driver libraries ghc-tarballs
1089 configure.ac config.guess config.sub configure \
1090 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
1091 ghc.spec.in ghc.spec extra-gcc-opts.in VERSION \
1092 boot boot-pkgs packages ghc.mk
1094 SRC_DIST_TARBALL = $(SRC_DIST_NAME)-src.tar.bz2
1097 echo $(ProjectVersion) >VERSION
1102 # $(call sdist_file,compiler,stage2,cmm,Foo/Bar,CmmLex,x)
1103 # to copy the generated file that replaces compiler/cmm/Foo/Bar/CmmLex.x, where
1104 # "stage2" is the dist dir.
1106 "$(CP)" $1/$2/build/$4/$5.hs $(SRC_DIST_DIR)/$1/$3/$4
1107 mv $(SRC_DIST_DIR)/$1/$3/$4/$5.$6 $(SRC_DIST_DIR)/$1/$3/$4/$5.$6.source
1112 "$(RM)" $(RM_OPTS_REC) $(SRC_DIST_DIR)
1113 "$(RM)" $(RM_OPTS) $(SRC_DIST_TARBALL)
1114 mkdir $(SRC_DIST_DIR)
1115 cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_DIRS); do mkdir $$i; ( cd $$i && lndir $(TOP)/$$i ); done
1116 cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_FILES); do $(LN_S) $(TOP)/$$i .; done
1117 cd $(SRC_DIST_DIR) && $(MAKE) distclean
1118 rm -rf $(SRC_DIST_DIR)/libraries/tarballs/
1119 rm -rf $(SRC_DIST_DIR)/libraries/stamp/
1120 $(call sdist_file,compiler,stage2,cmm,,CmmLex,x)
1121 $(call sdist_file,compiler,stage2,cmm,,CmmParse,y)
1122 $(call sdist_file,compiler,stage2,parser,,Lexer,x)
1123 $(call sdist_file,compiler,stage2,parser,,Parser,y.pp)
1124 $(call sdist_file,compiler,stage2,parser,,ParserCore,y)
1125 $(call sdist_file,utils/hpc,dist,,,HpcParser,y)
1126 $(call sdist_file,utils/genprimopcode,dist,,,Lexer,x)
1127 $(call sdist_file,utils/genprimopcode,dist,,,Parser,y)
1128 $(call sdist_file,utils/haddock,dist,src,Haddock,Lex,x)
1129 $(call sdist_file,utils/haddock,dist,src,Haddock,Parse,y)
1130 cd $(SRC_DIST_DIR) && "$(RM)" $(RM_OPTS_REC) compiler/stage[123] mk/build.mk
1131 cd $(SRC_DIST_DIR) && "$(FIND)" $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" -o -name "*-darcs-backup*" \) -print | "$(XARGS)" $(XARGS_OPTS) "$(RM)" $(RM_OPTS_REC)
1135 "$(TAR_CMD)" chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(TOP)/$(SRC_DIST_TARBALL)
1137 sdist-manifest : $(SRC_DIST_TARBALL)
1138 tar tjf $(SRC_DIST_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest
1140 # Upload the distribution(s)
1141 # Retrying is to work around buggy firewalls that corrupt large file transfers
1143 ifneq "$(PublishLocation)" ""
1145 $(call try10Times,$(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist)
1148 ifeq "$(BootingFromHc)" "YES"
1149 # In a normal build we use GHC to compile C files (see
1150 # rules/c-suffix-rules.mk), which passes a number of its own options
1151 # to the C compiler. So when bootstrapping we have to provide these
1152 # flags explicitly to C compilations.
1153 SRC_CC_OPTS += -DNO_REGS -DUSE_MINIINTERPRETER
1154 SRC_CC_OPTS += -D__GLASGOW_HASKELL__=$(ProjectVersionInt)
1155 SRC_CC_OPTS += -I$(GHC_INCLUDE_DIR)
1158 # -----------------------------------------------------------------------------
1159 # sdisting libraries
1161 # Use manually, with e.g.:
1162 # make sdist_directory
1165 inplace/bin/ghc-cabal sdist libraries/$* dist-install
1167 # -----------------------------------------------------------------------------
1172 CLEAN_FILES += utils/ghc-pwd/ghc-pwd
1173 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.exe
1174 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.hi
1175 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.o
1176 CLEAN_FILES += libraries/bootstrapping.conf
1177 CLEAN_FILES += libraries/integer-gmp/cbits/GmpDerivedConstants.h
1178 CLEAN_FILES += libraries/integer-gmp/cbits/mkGmpDerivedConstants
1180 clean : clean_files clean_libraries
1184 "$(RM)" $(RM_OPTS) $(CLEAN_FILES)
1186 ifneq "$(NO_CLEAN_GMP)" "YES"
1187 CLEAN_FILES += libraries/integer-gmp/gmp/gmp.h
1188 CLEAN_FILES += libraries/integer-gmp/gmp/libgmp.a
1193 "$(RM)" $(RM_OPTS_REC) libraries/integer-gmp/gmp/objs
1194 "$(RM)" $(RM_OPTS_REC) libraries/integer-gmp/gmp/gmpbuild
1197 .PHONY: clean_libraries
1198 clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES) $(PACKAGES_STAGE2))
1199 clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(STAGE0_PACKAGES))
1202 "$(RM)" $(RM_OPTS_REC) $(patsubst %, libraries/%/dist, $(PACKAGES) $(PACKAGES_STAGE2))
1203 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/*.buildinfo, $(PACKAGES) $(PACKAGES_STAGE2))
1205 # We have to define a clean target for each library manually, because the
1206 # libraries/*/ghc.mk files are not included when we're cleaning.
1207 ifeq "$(CLEANING)" "YES"
1208 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),\
1209 $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install)))
1212 clean : clean_bindistprep
1213 .PHONY: clean_bindistprep
1215 "$(RM)" $(RM_OPTS_REC) bindistprep/
1218 "$(RM)" $(RM_OPTS) config.cache config.status config.log mk/config.h mk/stamp-h
1219 "$(RM)" $(RM_OPTS) mk/config.mk mk/are-validating.mk mk/project.mk
1220 "$(RM)" $(RM_OPTS) mk/config.mk.old mk/project.mk.old
1221 "$(RM)" $(RM_OPTS) extra-gcc-opts docs/users_guide/ug-book.xml
1222 "$(RM)" $(RM_OPTS) compiler/ghc.cabal compiler/ghc.cabal.old
1223 "$(RM)" $(RM_OPTS) ghc/ghc-bin.cabal
1224 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h
1225 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h
1226 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h
1227 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h
1228 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h
1230 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.log, $(PACKAGES) $(PACKAGES_STAGE2))
1231 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.status, $(PACKAGES) $(PACKAGES_STAGE2))
1232 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES) $(PACKAGES_STAGE2))
1233 "$(RM)" $(RM_OPTS_REC) $(patsubst %, libraries/%/autom4te.cache, $(PACKAGES) $(PACKAGES_STAGE2))
1235 maintainer-clean : distclean
1236 "$(RM)" $(RM_OPTS) configure mk/config.h.in
1237 "$(RM)" $(RM_OPTS_REC) autom4te.cache libraries/*/autom4te.cache
1238 "$(RM)" $(RM_OPTS) ghc.spec
1239 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/GNUmakefile, \
1240 $(PACKAGES) $(PACKAGES_STAGE2))
1241 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/ghc.mk, $(PACKAGES) $(PACKAGES_STAGE2))
1242 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/configure, \
1243 $(PACKAGES) $(PACKAGES_STAGE2))
1244 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h.in
1245 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h.in
1246 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h.in
1247 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h.in
1248 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h.in
1250 .PHONY: all_libraries
1252 .PHONY: bootstrapping-files
1253 bootstrapping-files: $(OTHER_LIBS)
1254 bootstrapping-files: includes/ghcautoconf.h
1255 bootstrapping-files: includes/DerivedConstants.h
1256 bootstrapping-files: includes/GHCConstants.h