+# -----------------------------------------------------------------------------
+#
+# (c) 2009 The University of Glasgow
+#
+# This file is part of the GHC build system.
+#
+# To understand how the build system works and how to modify it, see
+# http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture
+# http://hackage.haskell.org/trac/ghc/wiki/Building/Modifying
+#
+# -----------------------------------------------------------------------------
ifeq "$(wildcard distrib/)" ""
@echo 'Run "make install" to install'
@false
-.PHONY: install
-install:
- $(MAKE) -r --no-print-directory -f ghc.mk install BINDIST=YES NO_INCLUDE_DEPS=YES
-
-.PHONY: show
-show:
- $(MAKE) -r --no-print-directory -f ghc.mk $@
+.PHONY: install show
+install show:
+ $(MAKE) -r --no-print-directory -f ghc.mk $@ BINDIST=YES NO_INCLUDE_DEPS=YES
else
-# The problem we need to solve is as follows.
-#
-# GNU make supports included Makefiles, and it is clever enough to try
-# to update those Makefiles when they are out-of-date or missing. It
-# first reads all the Makefiles, and then tries to build each one if
-# it is out-of-date, using the rules in the Makefiles themselves.
-# When it has brought all the Makefiles up-to-date, it restarts itself
-# to read the newly-generated Makefiles.
-#
-# This works fine, unless there are dependencies *between* the
-# Makefiles. For example in the GHC build, for each package we have a
-# package-data.mk file which is generated by the ghc-cabal program,
-# and we have a .depend file. The .depend file cannot be generated
-# until package-data.mk has been generated and make has been restarted
-# to read in its contents, because it is the package-data.mk file that
-# tells us which modules are in the package. But make always makes
-# all the Makefiles before restarting - it doesn't take into account a
-# dependency between Makefiles and restart itself earlier.
-
-# Consider the following makefile:
-
-# --------------------
-# all :
-#
-# include inc1.mk
-#
-# inc1.mk : Makefile
-# echo "X = C" >$@
-#
-# include inc2.mk
-#
-# inc2.mk : inc1.mk
-# echo "Y = $(X)" >$@
-# --------------------
-
-# Now try it:
-#
-# $ make -f fail.mk
-# fail.mk:3: inc1.mk: No such file or directory
-# fail.mk:8: inc2.mk: No such file or directory
-# echo "X = C" >inc1.mk
-# echo "Y = " >inc2.mk
-# make: Nothing to be done for `all'.
-
-# make built both inc1.mk and inc2.mk without restarting itself
-# between the two (even though we added a dependency on inc1.mk from
-# inc2.mk).
-#
-# The solution we adopt in the GHC build system is essentially this:
-
-# --------------------
-# PHASE = 0
-#
-# ifeq "$(PHASE)" "0"
-# all :
-# $(MAKE) PHASE=1
-# else
-# all :
-# endif
-#
-# -include inc1.mk
-#
-# inc1.mk : Makefile
-# echo "X = C" >$@
-#
-# ifneq "$(PHASE)" "0"
-# include inc2.mk
-#
-# inc2.mk : inc1.mk
-# echo "Y = $(X)" >$@
-# endif
-#
-# clean :
-# rm -f inc1.mk inc2.mk
-# --------------------
-
-# That is, every time make is invoked, we force it to update inc1.mk
-# and then restart. In the GHC build system we need to divide the
-# build into 4 phases in fact, with a restart between each phase. See
-# ghc.mk for the details on what happens in each phase and why.
-
default : all
@:
+# For help, type 'make help'
+.PHONY: help
+help :
+ @cat MAKEHELP
+
+ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
+-include mk/config.mk
+else
+include mk/config.mk
+ifeq "$(ProjectVersion)" ""
+$(error Please run ./configure first)
+endif
+endif
+
+include mk/custom-settings.mk
+
# No need to update makefiles for these targets:
-REALGOALS=$(filter-out clean clean_% distclean maintainer-clean show,$(MAKECMDGOALS))
+REALGOALS=$(filter-out binary-dist binary-dist-prep bootstrapping-files framework-pkg clean clean_% distclean maintainer-clean show help test fulltest,$(MAKECMDGOALS))
+
+# configure touches certain files even if they haven't changed. This
+# can mean a lot of unnecessary recompilation after a re-configure, so
+# here we cache the old versions of these files so we can restore the
+# timestamps.
+%.old: %
+ @set -x && test -f $@ && cmp -s $< $@ || cp -p $< $@
+ touch -r $@ $<
+
# NB. not the same as saying '%: ...', which doesn't do the right thing:
# it does nothing if we specify a target that already exists.
.PHONY: $(REALGOALS)
-$(REALGOALS) all:
- @echo "===--- updating makefiles phase 0"
- $(MAKE) -r --no-print-directory -f ghc.mk phase=0 just-makefiles
- @echo "===--- updating makefiles phase 1"
- $(MAKE) -r --no-print-directory -f ghc.mk phase=1 just-makefiles
- @echo "===--- updating makefiles phase 2"
- $(MAKE) -r --no-print-directory -f ghc.mk phase=2 just-makefiles
- @echo "===--- updating makefiles phase 3"
- $(MAKE) -r --no-print-directory -f ghc.mk phase=3 just-makefiles
- @echo "===--- finished updating makefiles"
- $(MAKE) -r --no-print-directory -f ghc.mk $@
+$(REALGOALS) all: mk/config.mk.old mk/project.mk.old compiler/ghc.cabal.old
+ifneq "$(OMIT_PHASE_0)" "YES"
+ @echo "===--- building phase 0"
+ $(MAKE) -r --no-print-directory -f ghc.mk phase=0 phase_0_builds
+endif
+ifneq "$(OMIT_PHASE_1)" "YES"
+ @echo "===--- building phase 1"
+ $(MAKE) -r --no-print-directory -f ghc.mk phase=1 phase_1_builds
+endif
+ @echo "===--- building final phase"
+ $(MAKE) -r --no-print-directory -f ghc.mk phase=final $@
+
+binary-dist: binary-dist-prep
+ifeq "$(mingw32_TARGET_OS)" "1"
+ mv bindistprep/*.exe .
+endif
+ mv bindistprep/*.tar.bz2 .
-binary-dist:
+binary-dist-prep:
+ifeq "$(mingw32_TARGET_OS)" "1"
+ $(MAKE) -r --no-print-directory -f ghc.mk windows-binary-dist-prep
+ $(MAKE) -r --no-print-directory -f ghc.mk windows-installer
+else
rm -f bindist-list
$(MAKE) -r --no-print-directory -f ghc.mk bindist BINDIST=YES
- $(MAKE) -r --no-print-directory -f ghc.mk binary-dist
+ $(MAKE) -r --no-print-directory -f ghc.mk unix-binary-dist-prep
+endif
clean distclean maintainer-clean:
- $(MAKE) -r --no-print-directory -f ghc.mk $@
+ $(MAKE) -r --no-print-directory -f ghc.mk $@ CLEANING=YES
test ! -d testsuite || $(MAKE) -C testsuite $@
$(filter clean_%, $(MAKECMDGOALS)) : clean_% :
- $(MAKE) -r --no-print-directory -f ghc.mk $@
+ $(MAKE) -r --no-print-directory -f ghc.mk $@ CLEANING=YES
-show:
+bootstrapping-files show:
$(MAKE) -r --no-print-directory -f ghc.mk $@
+ifeq "$(darwin_TARGET_OS)" "1"
+framework-pkg:
+ $(MAKE) -C distrib/MacOS $@
+endif
+
# If the user says 'make A B', then we don't want to invoke two
# instances of the rule above in parallel:
.NOTPARALLEL:
endif
+.PHONY: test
+test:
+ $(MAKE) -C testsuite/tests/ghc-regress CLEANUP=1 OUTPUT_SUMMARY=../../../testsuite_summary.txt fast
+
+.PHONY: fulltest
+fulltest:
+ $(MAKE) -C testsuite/tests/ghc-regress CLEANUP=1 OUTPUT_SUMMARY=../../../testsuite_summary.txt
+
projects / ghc-hetmet.git / blobdiff