BinDistDirs = includes compiler docs driver libraries rts utils
BIN_DIST_NAME=ghc-$(ProjectVersion)
-BIN_DIST_TMPDIR=$(FPTOOLS_TOP_ABS)
+BIN_DIST_TOPDIR=$(FPTOOLS_TOP_ABS)
+BIN_DIST_DIR=$(BIN_DIST_TOPDIR)/$(BIN_DIST_NAME)
+
+BIN_DIST_TARBALL=ghc-$(ProjectVersion)-$(TARGETPLATFORM).tar.bz2
BIN_DIST_TOP= distrib/Makefile-bin.in \
distrib/configure-bin.ac \
ifeq "$(BIN_DIST)" ""
@echo "WARNING: To run the binary-dist target, you need to set BIN_DIST=1 in mk/build.mk" && exit 1
endif
- -rm -rf $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)
- -$(RM) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME).tar.gz
+ -rm -rf $(BIN_DIST_DIR)
+ -$(RM) $(BIN_DIST_DIR).tar.gz
@for i in $(BinDistDirs); do \
if test -d "$$i"; then \
- echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM); \
- $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM); \
- echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM); \
- $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM); \
- echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
- $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
+ echo $(MKDIRHIER) $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM); \
+ $(MKDIRHIER) $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM); \
+ echo $(MKDIRHIER) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM); \
+ $(MKDIRHIER) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM); \
+ echo $(MKDIRHIER) $(BIN_DIST_DIR)/share; \
+ $(MKDIRHIER) $(BIN_DIST_DIR)/share; \
echo $(MAKE) -C $$i $(MFLAGS) $(INSTALL_STAGE) install \
- prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \
- libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
+ prefix=$(BIN_DIST_DIR) \
+ exec_prefix=$(BIN_DIST_DIR) \
+ bindir=$(BIN_DIST_DIR)/bin/$(TARGETPLATFORM) \
+ libdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
+ libexecdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
+ datadir=$(BIN_DIST_DIR)/share; \
$(MAKE) -C $$i $(MFLAGS) $(INSTALL_STAGE) install \
- prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \
- libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
+ prefix=$(BIN_DIST_DIR) \
+ exec_prefix=$(BIN_DIST_DIR) \
+ bindir=$(BIN_DIST_DIR)/bin/$(TARGETPLATFORM) \
+ libdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
+ libexecdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
+ datadir=$(BIN_DIST_DIR)/share; \
fi; \
done
binary-dist::
@for i in $(BIN_DIST_TOP); do \
if test -f "$$i"; then \
- echo cp $$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME); \
- cp $$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME); \
+ echo cp $$i $(BIN_DIST_DIR); \
+ cp $$i $(BIN_DIST_DIR); \
fi; \
done;
@echo "Configuring the Makefile for this project..."
- touch $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "package = ghc" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "version = $(ProjectVersion)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "PACKAGE_SH_SCRIPTS = $(BinDistShScripts)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "PACKAGE_PRL_SCRIPTS = $(BinDistPrlScripts)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "PACKAGE_LIB_PRL_SCRIPTS = $(BinDistLibPrlScripts)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "PACKAGE_LIB_SPLICED_FILES = $(BinDistLibSplicedFiles)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "PACKAGE_BINS = $(BinDistBins)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "PACKAGE_OPT_BINS = $(BinDistOptBins)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "PACKAGE_LINKS = $(BinDistLinks)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- cat $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile-bin.in >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
+ touch $(BIN_DIST_DIR)/Makefile.in
+ echo "package = ghc" >> $(BIN_DIST_DIR)/Makefile.in
+ echo "version = $(ProjectVersion)" >> $(BIN_DIST_DIR)/Makefile.in
+ echo "PACKAGE_SH_SCRIPTS = $(BinDistShScripts)" >> $(BIN_DIST_DIR)/Makefile.in
+ echo "PACKAGE_PRL_SCRIPTS = $(BinDistPrlScripts)" >> $(BIN_DIST_DIR)/Makefile.in
+ echo "PACKAGE_LIB_PRL_SCRIPTS = $(BinDistLibPrlScripts)" >> $(BIN_DIST_DIR)/Makefile.in
+ echo "PACKAGE_LIB_SPLICED_FILES = $(BinDistLibSplicedFiles)" >> $(BIN_DIST_DIR)/Makefile.in
+ echo "PACKAGE_BINS = $(BinDistBins)" >> $(BIN_DIST_DIR)/Makefile.in
+ echo "PACKAGE_OPT_BINS = $(BinDistOptBins)" >> $(BIN_DIST_DIR)/Makefile.in
+ echo "PACKAGE_LINKS = $(BinDistLinks)" >> $(BIN_DIST_DIR)/Makefile.in
+ cat $(BIN_DIST_DIR)/Makefile-bin.in >> $(BIN_DIST_DIR)/Makefile.in
@echo "Generating a shippable configure script.."
- $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/configure-bin.ac $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/configure.ac
- ( cd $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME); autoconf )
+ $(MV) $(BIN_DIST_DIR)/configure-bin.ac $(BIN_DIST_DIR)/configure.ac
+ ( cd $(BIN_DIST_DIR); autoconf )
#
# binary dist'ing the documentation.
# The default documentation to build/install is given below; overrideable
if test -d "$$i"; then \
$(MAKE) -C $$i $(MFLAGS) $(BINDIST_DOC_WAYS); \
echo $(MAKE) -C $$i $(MFLAGS) install-docs XMLDocWays="$(BINDIST_DOC_WAYS)" \
- prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \
- libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
+ prefix=$(BIN_DIST_DIR) \
+ exec_prefix=$(BIN_DIST_DIR) \
+ bindir=$(BIN_DIST_DIR)/bin/$(TARGETPLATFORM) \
+ libdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
+ libexecdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
+ datadir=$(BIN_DIST_DIR)/share; \
$(MAKE) -C $$i $(MFLAGS) install-docs XMLDocWays="$(BINDIST_DOC_WAYS)" \
- prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \
- libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
+ prefix=$(BIN_DIST_DIR) \
+ exec_prefix=$(BIN_DIST_DIR) \
+ bindir=$(BIN_DIST_DIR)/bin/$(TARGETPLATFORM) \
+ libdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
+ libexecdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
+ datadir=$(BIN_DIST_DIR)/share; \
fi \
done
endif
binary-dist::
@for i in $(BinDistPrlScripts); do \
echo "Renaming $$i to $$i.prl"; \
- $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i.prl; \
+ $(MV) $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)/$$i $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)/$$i.prl; \
done
endif
binary-dist::
@for i in $(BinDistLibPrlScripts); do \
echo "Renaming $$i to $$i.prl"; \
- $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i.prl; \
+ $(MV) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)/$$i $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)/$$i.prl; \
done
endif
ifneq "$(BinDistShScripts)" ""
binary-dist::
@for i in $(BinDistShScripts); do \
- if test -x $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i ; then \
+ if test -x $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)/$$i ; then \
echo "Renaming $$i to $$i.sh"; \
- $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i.sh; \
+ $(MV) $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)/$$i $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)/$$i.sh; \
fi \
done
endif
-#
-# Do this separately for now
-#
-binary-pack::
- ( cd $(BIN_DIST_TMPDIR); $(TAR) chzf $(BIN_DIST_NAME).tar.gz $(BIN_DIST_NAME) )
-
-ifneq "$(way)" ""
-.PHONY: package-way-dist
-package-way-dist::
- ( cd $(BIN_DIST_TMPDIR); $(FIND) $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print | xargs tar cvf $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar )
- gzip $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar
-endif
+# Tar up the distribution and build a manifest
+binary-dist ::
+ ( cd $(BIN_DIST_TOPDIR); tar cf - $(BIN_DIST_NAME) | bzip2 >$(BIN_DIST_TARBALL) )
+ ( cd $(BIN_DIST_TOPDIR); bunzip2 -c $(BIN_DIST_TARBALL) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >bin-manifest-$(ProjectVersion) )
-ifneq "$(way)" ""
-remove-way-dist::
- ( cd $(BIN_DIST_TMPDIR); $(FIND) $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print -exec $(RM) {} \; )
+# Upload the distribution and documentation
+ifneq "$(PublishLocation)" ""
+binary-dist ::
+ @for i in 0 1 2 3 4 5 6 7 8 9; do \
+ echo "Try $$i: $(PublishCp) $(BIN_DIST_TARBALL) $(PublishLocation)"; \
+ if $(PublishCp) $(BIN_DIST_TARBALL) $(PublishLocation); then break; fi\
+ done
+ $(PublishCp) -r $(BIN_DIST_DIR)/share/html/* $(PublishLocation)/docs
endif
+
binary-dist::
@echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"
#
# Files to include in source distributions
#
-SRC_DIST_DIRS += docs distrib $(filter-out docs distrib,$(SUBDIRS))
+SRC_DIST_DIRS += mk docs distrib $(filter-out docs distrib,$(SUBDIRS))
SRC_DIST_FILES += \
configure.ac config.guess config.sub configure \
aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
- ghc.spec.in mk/bootstrap.mk \
- mk/boilerplate.mk mk/config.h.in mk/config.mk.in mk/opts.mk \
- mk/paths.mk mk/package.mk mk/suffix.mk mk/target.mk \
- mk/fptools.css mk/fix_install_names.sh
+ ghc.spec.in VERSION
-# clean the tree first, leaving certain extra files in place (eg. configure)
-dist :: distclean
-
-dist ::
- -rm -rf $(SRC_DIST_DIR)
- -$(RM) $(SRC_DIST_NAME).tar.gz
- mkdir $(SRC_DIST_DIR)
- mkdir $(SRC_DIST_DIR)/mk
- $(FIND) $(SRC_DIST_DIRS) -type d \( -name _darcs -prune -o -name SRC -prune -o -name "autom4te*" -prune -o -print \) | sed -e 's!.*!mkdir "$(SRC_DIST_DIR)/&"!' | sh
- $(FIND) $(SRC_DIST_DIRS) $(SRC_DIST_FILES) -name _darcs -prune -o -name SRC -prune -o -name "autom4te*" -prune -o -name "*~" -prune -o -name ".cvsignore" -prune -o -name "\#*" -prune -o -name ".\#*" -prune -o -name "log" -prune -o -name "*-SAVE" -prune -o -name "*.orig" -prune -o -name "*.rej" -prune -o ! -type d -print | sed -e 's!.*!$(LN_S) "$(FPTOOLS_TOP_ABS)/&" "$(SRC_DIST_DIR)/&"!' | sh
+# -----------------------------------------------------------------------------
+# Source distributions
-# Automatic generation of a MANIFEST file for a source distribution
-# tree that is ready to go.
-dist-manifest ::
- cd $(SRC_DIST_DIR); $(FIND) . \( -type l -o -type f \) -exec ls -lLG {} \; | sed -e 's/\.\///' > MANIFEST
+# A source dist is built from a complete build tree, because we
+# require some extra files not contained in a darcs checkout: the
+# output from Happy and Alex, for example.
+#
+# The steps performed by 'make dist' are as follows:
+# - create a complete link-tree of the current build tree in /tmp
+# - run 'make distclean' on that tree
+# - remove a bunch of other files that we know shouldn't be in the dist
+# - tar up first the extralibs package, then the main source package
-dist-package :: dist-package-tar-gz
+EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/libraries/%, $(shell cat libraries/extra-packages))
-SRC_DIST_PATHS = $(patsubst %, $(SRC_DIST_NAME)/%, $(SRC_DIST_FILES) $(SRC_DIST_DIRS))
+SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2
+SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2
-dist-package-tar-bz2 ::
- BZIP2=-9 $(TAR) chjf $(SRC_DIST_NAME)-src.tar.bz2 $(SRC_DIST_NAME) || $(RM) $(SRC_DIST_NAME)-src.tar.bz2
+VERSION :
+ echo $(ProjectVersion) >VERSION
-dist-package-tar-gz ::
- $(TAR) chzf $(SRC_DIST_NAME)-src.tar.gz $(SRC_DIST_NAME) || $(RM) $(SRC_DIST_NAME)-src.tar.gz
+dist :: VERSION
-dist-package-zip ::
- cd ..; $(LN_S) $(FPTOOLS_TOP_ABS) $(SRC_DIST_NAME) && \
- $(ZIP) $(ZIP_OPTS) -r $(SRC_DIST_NAME)-src.zip $(SRC_DIST_PATHS)
+dist ::
+ $(RM) -rf $(SRC_DIST_DIR)
+ $(RM) $(SRC_DIST_NAME).tar.gz
+ mkdir $(SRC_DIST_DIR)
+ ( cd $(SRC_DIST_DIR) \
+ && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \
+ && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \
+ && $(MAKE) distclean \
+ && $(RM) -rf compiler/stage[123] mk/build.mk \
+ && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \
+ )
+ tar chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL)
+ $(RM) -rf $(EXTRA_LIBS)
+ tar chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL)
+
+# Upload the distribution(s)
+# Retrying is to work around buggy firewalls that corrupt large file transfers
+# over SSH.
+ifneq "$(PublishLocation)" ""
+dist ::
+ @for i in 0 1 2 3 4 5 6 7 8 9; do \
+ echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)"; \
+ if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation); then break; fi\
+ done
+ @for i in 0 1 2 3 4 5 6 7 8 9; do \
+ echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)"; \
+ if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation); then break; fi\
+ done
+endif
# -----------------------------------------------------------------------------
# HC file bundles
# don't clean config.mk: it's needed when cleaning stuff later on
LATE_DIST_CLEAN_FILES += mk/config.mk
+# VERSION is shipped in a source dist
+MAINTAINER_CLEAN_FILES += VERSION
+
extraclean::
$(RM) -rf autom4te.cache
projects / ghc-hetmet.git / blobdiff