############################################################################
#
-# fptools/Makefile
+# This is the top-level Makefile for GHC
#
-# This is the main Makefile for fptools.
+# Targets:
+#
+# bootstrap (DEFAULT)
+# Builds GHC, then builds the libraries,
+# then uses this GHC ("stage 1") to build itself
+# ("stage 2").
+#
+# bootstrap2
+# Same as bootstrap
+#
+# bootstrap3
+# bootstrap2 + we build GHC one more time ("stage 3")
+#
+# stage1
+# Just build up to stage 1
+#
+# stage2
+# Just build stage 2 (stage 1 must be built)
+#
+# stage3
+# Just build stage 3 (stage 2 must be built)
+#
+# all
+# Same as bootstrap
+#
+# install
+# Install everything, including stage 2 compiler by default
+# (override with stage=3, for example).
+#
+# dist
+# Make a source dist (WARNING: runs 'make distclean' first)
+#
+# binary-dist
+# Builds a binary distribution
+#
+# hc-file-bundle
+# Builds an HC-file bundle, for bootstrapping
+#
+# clean, distclean, maintainer-clean
+# Increasing levels of cleanliness
#
############################################################################
TOP=.
include $(TOP)/mk/boilerplate.mk
-# find the projects that actually exist...
-ProjectsThatExist = $(filter $(patsubst %/, %, $(wildcard */)), $(AllProjects))
+#
+# Order is important! It's e.g. necessary to descend into include/
+# before the rest to have a config.h, etc.
+#
+# If we're booting from .hc files, swap the order
+# we descend into subdirs - to boot utils must be before driver.
+#
+.PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3
-# and filter only those that the user requested, if necessary
-ifeq "$(ProjectsToBuild)" ""
-SUBDIRS = $(ProjectsThatExist)
+# We can't 'make boot' in libraries until stage1 is built
+ifeq "$(BootingFromHc)" "YES"
+SUBDIRS_BUILD = includes rts compat compiler docs utils driver
else
-SUBDIRS = $(filter $(ProjectsToBuild), $(ProjectsThatExist))
+SUBDIRS_BUILD = includes compat utils driver docs compiler rts
endif
-ifneq "$(Project)" ""
- ifeq "$(Project)" "GreenCard"
- ProjectDirectory=greencard
- else
- ifeq "$(Project)" "HaskellDirect"
- ProjectDirectory=hdirect
- else
- ProjectDirectory=$(Project)
- endif
- endif
- include $(shell echo $(ProjectDirectory) | tr A-Z a-z)/mk/config.mk
-endif
+SUBDIRS_INSTALL = includes compat utils driver docs rts libraries compiler
-# -----------------------------------------------------------------------------
-# Certain targets require that Project is set from the command line.
-
-CURRENT_TARGET = $(MAKECMDGOALS)
-project-check :
- @if [ "$(Project)" = "" ]; then \
- echo " You need to set \"Project\" in order to make $(CURRENT_TARGET)"; \
- echo " eg. make $(CURRENT_TARGET) Project=Ghc"; \
- exit 1; \
+# Sanity check that all the core libraries are in the tree, to catch
+# failure to run darcs-all.
+check-packages :
+ @for d in `cat libraries/core-packages`; do \
+ if test ! -d libraries/$$d; then \
+ echo "Looks like you're missing libraries/$$d,"; \
+ echo "maybe you haven't done './darcs-all get'?"; \
+ exit 1; \
+ fi \
+ done
+ @if test ! -e libraries/base/configure; then \
+ echo "Looks like you're missing base's configure script."; \
+ echo "Did you run 'sh boot' at the top level?"; \
+ exit 1; \
fi
-# -----------------------------------------------------------------------------
-# Targets: all, stage1, stage2, stage3
-
-DIST_CLEAN_FILES += config.cache config.status
-
-extraclean::
- $(RM) -rf autom4te.cache
-
-#
-# If you've ended up using an in-place version of Happy,
-# make sure it gets built early on.
-#
-ifeq "$(HAPPY)" "$(FPTOOLS_TOP_ABS)/happy/src/happy-inplace"
-build :: $(FPTOOLS_TOP_ABS)/happy/src/happy-inplace
-
-$(FPTOOLS_TOP_ABS)/happy/src/happy-inplace : glafp-utils
- $(MAKE) -C happy boot all
-endif
-
-# Build all projects that we know about
-build ::
+stage1 : check-packages
+ $(MAKE) -C utils/mkdependC boot
@case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
- for i in $(SUBDIRS); do \
- if [ -d $$i ]; then \
- $(MAKE) -C $$i boot; \
- if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
- $(MAKE) -C $$i all; \
- if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
- fi; \
+ for i in $(SUBDIRS_BUILD); do \
+ echo "------------------------------------------------------------------------"; \
+ echo "== $(MAKE) boot $(MFLAGS);"; \
+ echo " in $(shell pwd)/$$i"; \
+ echo "------------------------------------------------------------------------"; \
+ $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \
+ if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
+ done; \
+ for i in $(SUBDIRS_BUILD); do \
+ echo "------------------------------------------------------------------------"; \
+ echo "== $(MAKE) all $(MFLAGS);"; \
+ echo " in $(shell pwd)/$$i"; \
+ echo "------------------------------------------------------------------------"; \
+ $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \
+ if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
done
+ $(MAKE) -C libraries boot
+ $(MAKE) -C libraries all
-ifeq "$(findstring ghc, $(SUBDIRS))" "ghc"
+stage2 : check-packages
+ $(MAKE) -C compiler boot stage=2
+ $(MAKE) -C compiler stage=2
-stage1 : build
+stage3 : check-packages
+ $(MAKE) -C compiler boot stage=3
+ $(MAKE) -C compiler stage=3
-stage2 :
- $(MAKE) -C ghc/compiler boot stage=2
- $(MAKE) -C ghc/compiler stage=2
+bootstrap : bootstrap2
-stage3 :
- $(MAKE) -C ghc/compiler boot stage=3
- $(MAKE) -C ghc/compiler stage=3
+bootstrap2 : stage1
+ $(MAKE) stage2
-bootstrap : bootstrap2
-bootstrap2 : stage1 stage2
-bootstrap3 : stage1 stage2 stage3
+bootstrap3 : bootstrap2
+ $(MAKE) stage3
all :: bootstrap
+# -----------------------------------------------------------------------------
+# Installing
+
# We want to install the stage 2 bootstrapped compiler by default, but we let
# the user override this by saying 'make install stage=1', for example.
ifeq "$(stage)" ""
INSTALL_STAGE =
endif
-else # Not building GHC
-
-all :: build
-
-INSTALL_STAGE =
-
-endif
-
-boot ::
- @echo "Please use \`make all' only from the top-level, or \`make boot' followed"
- @echo "by \`make all' in an individual project subdirectory (ghc, hslibs etc.)."
-
-install ::
+# Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too
+install :: check-packages
+ $(INSTALL_DIR) $(bindir)
@case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
- for i in $(filter-out $(ProjectsDontInstall), $(SUBDIRS)); do \
- if [ -d $$i ]; then \
- $(MAKE) -C $$i $(INSTALL_STAGE) install; \
- if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
- fi; \
+ for i in $(SUBDIRS_INSTALL); do \
+ echo "------------------------------------------------------------------------"; \
+ echo "== $(MAKE) $@ $(MFLAGS);"; \
+ echo " in $(shell pwd)/$$i"; \
+ echo "------------------------------------------------------------------------"; \
+ $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
+ if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
done
+ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+# These files need to be in the InstallShield
+# INSTALL_DATAS rather than INSTALL_DOCS is used so these files go
+# in the top-level directory of the distribution
+INSTALL_DATAS += ANNOUNCE LICENSE README
+endif
+
# If installing on Windows with MinGW32, copy the gcc compiler, headers and libs
# and the perl interpreter and dll into the GHC prefix directory.
# Gcc and Perl source locations derived from configuration data.
-mkdir $(prefix)/include/mingw
-cp -rp $(GccDir)../include/* $(prefix)/include/mingw
-cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
+ -cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
+ -cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
-cp $(GccDir)../lib/*.* $(prefix)/gcc-lib
-cp $(GccDir)gcc.exe $(prefix)
-cp $(GccDir)as.exe $(prefix)/gcc-lib
install-docs ::
@case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
- for i in $(filter-out $(ProjectsDontInstall), $(SUBDIRS)); do \
- if [ -d $$i ]; then \
- $(MAKE) -C $$i $(INSTALL_STAGE) install-docs; \
- if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
- fi; \
+ for i in $(SUBDIRS_INSTALL); do \
+ echo "------------------------------------------------------------------------"; \
+ echo "== $(MAKE) $@ $(MFLAGS);"; \
+ echo " in $(shell pwd)/$$i"; \
+ echo "------------------------------------------------------------------------"; \
+ $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
+ if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
done
# -----------------------------------------------------------------------------
# Making a binary distribution
#
-# To make a particular binary distribution:
-# set $(Project) to the name of the project, capitalised (eg. Ghc or Happy).
-
# `dist' `binary-dist'
# Create a distribution tar file for this program. The tar file
# should be set up so that the file names in the tar file start with
# that are in the distribution, to make sure they are up to date in
# the distribution. See Making Releases.
#
-# binary-dist is an FPtools addition for binary distributions
+# binary-dist is a GHC addition for binary distributions
#
-binary-dist :: project-check
+BIN_DIST_TARBALL=ghc-$(ProjectVersion)-$(TARGETPLATFORM).tar.bz2
-BIN_DIST_TMPDIR=$(FPTOOLS_TOP_ABS)
-BIN_DIST_NAME=$(ProjectNameShort)-$(ProjectVersion)
+binary-dist::
+ -rm -rf $(BIN_DIST_DIR)
+ -$(RM) $(BIN_DIST_DIR).tar.gz
-#
-# list of toplevel directories to include in binary distrib.
-#
-BIN_DIST_MAIN_DIR=$($(Project)MainDir)
-BIN_DIST_DIRS=$($(Project)BinDistDirs)
+ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
-binary-dist:: binary-dist-pre
+binary-dist::
+ $(MAKE) prefix=$(BIN_DIST_DIR) install
-BIN_DIST_TOP= distrib/Makefile-bin.in \
- distrib/configure-bin.ac \
- distrib/INSTALL \
- $(BIN_DIST_MAIN_DIR)/ANNOUNCE \
- $(BIN_DIST_MAIN_DIR)/VERSION \
- $(BIN_DIST_MAIN_DIR)/LICENSE \
- $(BIN_DIST_MAIN_DIR)/README \
- glafp-utils/mkdirhier/mkdirhier \
- install-sh \
- config.guess \
- config.sub \
- aclocal.m4
+binary-dist::
+ cd $(BIN_DIST_DIR) && ../distrib/prep-bin-dist-mingw
-#
-# binary-dist creates a binary bundle, set BIN_DIST_NAME
-# to package name and do `make binary-dist Project=<project-name>'
-# (normally this just a thing you would do from the toplevel of fptools)
-#
-.PHONY: binary-dist-pre binary-dist binary-pack
+else
-BIN_DIST_NAME=$(ProjectNameShort)-$(ProjectVersion)
-BIN_DIST_TMPDIR=$(FPTOOLS_TOP_ABS)
+BinDistDirs = includes compiler docs rts
+
+BIN_DIST_TOP= distrib/Makefile \
+ distrib/configure-bin.ac \
+ distrib/INSTALL \
+ distrib/README \
+ ANNOUNCE \
+ LICENSE \
+ install-sh \
+ config.guess \
+ config.sub \
+ aclocal.m4
+
+ifeq "$(darwin_TARGET_OS)" "1"
+BIN_DIST_TOP+=mk/fix_install_names.sh
+endif
+
+.PHONY: binary-dist-pre% binary-dist binary-pack
+
+binary-dist:: binary-dist-pre
binary-dist-pre::
-ifeq "$(BIN_DIST)" ""
- @echo "WARNING: To run the binary-dist target, you need to set BIN_DIST=1 in your build.mk" && exit 1
-endif
- -rm -rf $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)
- -$(RM) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME).tar.gz
- -echo "BIN_DIST_DIRS = $(BIN_DIST_DIRS)"
- @for i in $(BIN_DIST_DIRS); do \
- if test -d "$$i"; then \
- echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM); \
- $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM); \
- echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM); \
- $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM); \
- echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
- $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
- echo $(MAKE) -C $$i $(MFLAGS) $(INSTALL_STAGE) install \
- prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \
- libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
- $(MAKE) -C $$i $(MFLAGS) $(INSTALL_STAGE) install \
- prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \
- libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
- fi; \
- done
+ $(MKDIRHIER) $(BIN_DIST_DIR)/mk
+ echo 'include $$(TOP)/Makefile-vars' > $(BIN_DIST_DIR)/mk/boilerplate.mk
+ echo 'include $$(TOP)/mk/install.mk' > $(BIN_DIST_DIR)/mk/target.mk
+ echo 'include $$(TOP)/mk/recurse.mk' >> $(BIN_DIST_DIR)/mk/target.mk
+ echo '' > $(BIN_DIST_DIR)/mk/compat.mk
+ cp mk/package.mk $(BIN_DIST_DIR)/mk/
+ cp mk/install.mk $(BIN_DIST_DIR)/mk/
+ cp mk/recurse.mk $(BIN_DIST_DIR)/mk/
+ $(MKDIRHIER) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)
+ $(MKDIRHIER) $(BIN_DIST_DIR)/share
+
+binary-dist::
+ $(MAKE) -C includes binary-dist DOING_BIN_DIST=YES
+ $(MAKE) -C compiler binary-dist DOING_BIN_DIST=YES $(INSTALL_STAGE)
+ # XXX $(MAKE) -C docs binary-dist DOING_BIN_DIST=YES
+ $(MAKE) -C rts binary-dist DOING_BIN_DIST=YES
+ $(MAKE) -C driver binary-dist DOING_BIN_DIST=YES
+ $(MAKE) -C utils binary-dist DOING_BIN_DIST=YES
+
+VARFILE=$(BIN_DIST_DIR)/Makefile-vars.in
binary-dist::
@for i in $(BIN_DIST_TOP); do \
if test -f "$$i"; then \
- echo cp $$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME); \
- cp $$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME); \
+ echo cp $$i $(BIN_DIST_DIR); \
+ cp $$i $(BIN_DIST_DIR); \
fi; \
done;
@echo "Configuring the Makefile for this project..."
- touch $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "package = $(ProjectNameShort)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "version = $(ProjectVersion)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "PACKAGE_SH_SCRIPTS = $($(Project)BinDistShScripts)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "PACKAGE_PRL_SCRIPTS = $($(Project)BinDistPrlScripts)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "PACKAGE_LIB_PRL_SCRIPTS = $($(Project)BinDistLibPrlScripts)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "PACKAGE_BINS = $($(Project)BinDistBins)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "PACKAGE_LINKS = $($(Project)BinDistLinks)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- cat $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile-bin.in >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
+ echo > $(VARFILE)
+ echo "package = ghc" >> $(VARFILE)
+ echo "version = $(ProjectVersion)" >> $(VARFILE)
+ echo "ProjectVersion = $(ProjectVersion)" >> $(VARFILE)
+ echo "HaveLibGmp = $(HaveLibGmp)" >> $(VARFILE)
+ echo "GhcLibsWithUnix = $(GhcLibsWithUnix)" >> $(VARFILE)
+ echo "GhcWithInterpreter = $(GhcWithInterpreter)" >> $(VARFILE)
+ echo "GhcHasReadline = $(GhcHasReadline)" >> $(VARFILE)
+ echo "BootingFromHc = $(BootingFromHc)" >> $(VARFILE)
+ cat distrib/Makefile-bin-vars.in >> $(VARFILE)
@echo "Generating a shippable configure script.."
- $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/configure-bin.ac $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/configure.ac
- ( cd $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME); autoconf )
- if test -x $(BIN_DIST_MAIN_DIR)/mk/post-install-script ; then \
- cp $(BIN_DIST_MAIN_DIR)/mk/post-install-script \
- $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) ; \
- fi
- if test -x $(BIN_DIST_MAIN_DIR)/mk/post-inplace-script ; then \
- cp $(BIN_DIST_MAIN_DIR)/mk/post-inplace-script \
- $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) ; \
- fi
+ $(MV) $(BIN_DIST_DIR)/configure-bin.ac $(BIN_DIST_DIR)/configure.ac
+ ( cd $(BIN_DIST_DIR); autoreconf )
+
+ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+binary-dist::
+ $(MKDIRHIER) $(BIN_DIST_DIR)/icons
+ cp distrib/hsicon.ico $(BIN_DIST_DIR)/icons
+endif
+
#
# binary dist'ing the documentation.
-# Which documentation to build/install is hardcoded below.
+# The default documentation to build/install is given below; overrideable
+# via build.mk or the 'make' command-line.
#
+# If BINDIST_DOC_WAYS is set, use that
+# If XMLDocWays is set, use that
+# Otherwise, figure out what we can build based on configure results
-BINDIST_DOC_WAYS = html ps
-# BINDIST_DOC_WAYS =
-
-binary-dist ::
-ifneq "$(DOCBOOK_CATALOG)" ""
- @for i in $(BIN_DIST_DIRS); do \
- if test -d "$$i"; then \
- $(MAKE) -C $$i $(MFLAGS) $(BINDIST_DOC_WAYS); \
- echo $(MAKE) -C $$i $(MFLAGS) install-docs XMLDocWays="$(BINDIST_DOC_WAYS)" \
- prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \
- libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
- $(MAKE) -C $$i $(MFLAGS) install-docs XMLDocWays="$(BINDIST_DOC_WAYS)" \
- prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \
- libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
- fi \
- done
+ifndef BINDIST_DOC_WAYS
+
+ifneq "$(XMLDocWays)" ""
+BINDIST_DOC_WAYS = $(XMLDocWays)
+else
+ifneq "$(XSLTPROC)" ""
+BINDIST_DOC_WAYS = html
+ifneq "$(FOP)" ""
+BINDIST_DOC_WAYS += ps pdf
+else
+ifneq "$(PDFXMLTEX)" ""
+BINDIST_DOC_WAYS += pdf
+endif
+ifneq "$(XMLTEX)" ""
+ifneq "$(DVIPS)" ""
+BINDIST_DOC_WAYS += ps
+endif # DVIPS
+endif # XMLTEX
+endif # FOP
+endif # XSLTPROC
+endif # XMLDocWays
+
+endif # BINDIST_DOC_WAYS
+
+ifneq "$(DIR_DOCBOOK_XSL)" ""
+.PHONY: binary-dist-doc-%
+
+BINARY_DIST_DOC_RULES=$(foreach d,$(BinDistDirs),binary-dist-doc-$d)
+
+binary-dist :: $(BINARY_DIST_DOC_RULES)
+
+$(BINARY_DIST_DOC_RULES): binary-dist-doc-%:
+ $(MAKE) -C $* $(MFLAGS) $(BINDIST_DOC_WAYS)
+ $(MAKE) -C $* $(MFLAGS) install-docs \
+ MAKING_BIN_DIST=1 \
+ XMLDocWays="$(BINDIST_DOC_WAYS)" \
+ prefix=$(BIN_DIST_DIR) \
+ exec_prefix=$(BIN_DIST_DIR) \
+ bindir=$(BIN_DIST_DIR)/bin/$(TARGETPLATFORM) \
+ libdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
+ libexecdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
+ datadir=$(BIN_DIST_DIR)/share
endif
-# Rename scripts to $i.prl and $i.sh where necessary.
-# ToDo: do this in a cleaner way...
+.PHONY: binary-dist-doc-%
-ifneq "$($(Project)BinDistPrlScripts)" ""
binary-dist::
- @for i in $($(Project)BinDistPrlScripts); do \
- echo "Renaming $$i to $$i.prl"; \
- $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i.prl; \
- done
-endif
+ $(MAKE) -C libraries binary-dist
-ifneq "$($(Project)BinDistLibPrlScripts)" ""
-binary-dist::
- @for i in $($(Project)BinDistLibPrlScripts); do \
- echo "Renaming $$i to $$i.prl"; \
- $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i.prl; \
- done
endif
-ifneq "$($(Project)BinDistShScripts)" ""
-binary-dist::
- @for i in $($(Project)BinDistShScripts); do \
- echo "Renaming $$i to $$i.sh"; \
- $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i.sh; \
- done
+# Tar up the distribution and build a manifest
+binary-dist :: tar-binary-dist
+
+.PHONY: tar-binary-dist
+tar-binary-dist:
+ ( cd $(BIN_DIST_TOPDIR); tar cf - $(BIN_DIST_NAME) | bzip2 >$(BIN_DIST_TARBALL) )
+ ( cd $(BIN_DIST_TOPDIR); bunzip2 -c $(BIN_DIST_TARBALL) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >bin-manifest-$(ProjectVersion) )
+
+PUBLISH_FILES = $(BIN_DIST_TARBALL)
+
+# Upload the distribution and documentation
+ifneq "$(ISCC)" ""
+WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-$(TARGETPLATFORM)
+WINDOWS_INSTALLER = $(WINDOWS_INSTALLER)$(exeext)
+
+PUBLISH_FILES += $(WINDOWS_INSTALLER)
+
+binary-dist :: generate-windows-installer
+
+.PHONY: generate-windows-installer
+generate-windows-installer ::
+ $(SED) "s/@VERSION@/$(ProjectVersion)/" distrib/ghc.iss | $(ISCC) /O. /F$(WINDOWS_INSTALLER_BASE) -
endif
-#
-# Do this separately for now
-#
-binary-pack::
- ( cd $(BIN_DIST_TMPDIR); $(TAR) chzf $(BIN_DIST_NAME).tar.gz $(BIN_DIST_NAME) )
-
-ifneq "$(way)" ""
-.PHONY: package-way-dist
-package-way-dist::
- ( cd $(BIN_DIST_TMPDIR); $(FIND) $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print | xargs tar cvf $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar )
- gzip $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar
+# Upload the distribution and documentation
+ifneq "$(PublishLocation)" ""
+binary-dist :: publish-binary-dist
endif
-ifneq "$(way)" ""
-remove-way-dist::
- ( cd $(BIN_DIST_TMPDIR); $(FIND) $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print -exec $(RM) {} \; )
+.PHONY: publish-binary-dist
+publish-binary-dist ::
+ @for f in $(PUBLISH_FILES); do \
+ for i in 0 1 2 3 4 5 6 7 8 9; do \
+ echo "Try $$i: $(PublishCp) $$f $(PublishLocation)/dist"; \
+ if $(PublishCp) $$f $(PublishLocation)/dist; then break; fi; \
+ done \
+ done
+
+ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+# On Windows, we cannot use absoluate pathnames to rsync, because they look
+# like remote pathnames ("c:/foo/bar"). Also, the docs reside in doc/
+# rather than share/, due to prep-bin-dist-mingw.
+publish-binary-dist ::
+ $(PublishCp) -r $(FPTOOLS_TOP)/$(BIN_DIST_NAME)/doc/html/* $(PublishLocation)/docs
+else
+publish-binary-dist ::
+ $(PublishCp) -r $(BIN_DIST_DIR)/share/html/* $(PublishLocation)/docs
endif
binary-dist::
# Do it like this:
#
# $ make
-# $ make dist Project=Ghc
+# $ make dist
#
# WARNING: `make dist' calls `make distclean' before tarring up the tree.
#
#
# Directory in which we're going to build the src dist
#
+SRC_DIST_NAME=ghc-$(ProjectVersion)
SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
#
# Files to include in source distributions
#
-SRC_DIST_DIRS += docs distrib $(filter-out docs distrib,$(SUBDIRS))
+SRC_DIST_DIRS += mk docs distrib $(filter-out docs distrib,$(SUBDIRS_INSTALL))
SRC_DIST_FILES += \
configure.ac config.guess config.sub configure \
- aclocal.m4 README Makefile install-sh \
- mk/bootstrap.mk \
- mk/boilerplate.mk mk/config.h.in mk/config.mk.in mk/opts.mk \
- mk/paths.mk mk/package.mk mk/suffix.mk mk/target.mk
-
-dist dist-manifest dist-package :: project-check
+ aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
+ ghc.spec.in VERSION
-# clean the tree first, leaving certain extra files in place (eg. configure)
-dist :: distclean
-
-dist ::
- -rm -rf $(SRC_DIST_DIR)
- -$(RM) $(SRC_DIST_NAME).tar.gz
- mkdir $(SRC_DIST_DIR)
- mkdir $(SRC_DIST_DIR)/mk
- $(FIND) $(SRC_DIST_DIRS) -type d \( -name CVS -prune -o -name SRC -prune -o -name "autom4te*" -prune -o -print \) | sed -e 's!.*!mkdir "$(SRC_DIST_DIR)/&"!' | sh
- $(FIND) $(SRC_DIST_DIRS) $(SRC_DIST_FILES) -name CVS -prune -o -name SRC -prune -o -name "autom4te*" -prune -o -name "*~" -prune -o -name ".cvsignore" -prune -o -name "\#*" -prune -o -name ".\#*" -prune -o -name "log" -prune -o -name "*-SAVE" -prune -o -name "*.orig" -prune -o -name "*.rej" -prune -o ! -type d -print | sed -e 's!.*!$(LN_S) "$(FPTOOLS_TOP_ABS)/&" "$(SRC_DIST_DIR)/&"!' | sh
+# -----------------------------------------------------------------------------
+# Source distributions
-# Automatic generation of a MANIFEST file for a source distribution
-# tree that is ready to go.
-dist-manifest ::
- cd $(SRC_DIST_DIR); $(FIND) . \( -type l -o -type f \) -exec ls -lLG {} \; | sed -e 's/\.\///' > MANIFEST
+# A source dist is built from a complete build tree, because we
+# require some extra files not contained in a darcs checkout: the
+# output from Happy and Alex, for example.
+#
+# The steps performed by 'make dist' are as follows:
+# - create a complete link-tree of the current build tree in /tmp
+# - run 'make distclean' on that tree
+# - remove a bunch of other files that we know shouldn't be in the dist
+# - tar up first the extralibs package, then the main source package
-dist-package :: dist-package-tar-gz
+EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/libraries/%, $(shell cat libraries/extra-packages))
-SRC_DIST_PATHS = $(patsubst %, $(SRC_DIST_NAME)/%, $(SRC_DIST_FILES) $(SRC_DIST_DIRS))
+SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2
+SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2
-dist-package-tar-bz2 ::
- BZIP2=-9 $(TAR) chjf $(SRC_DIST_NAME)-src.tar.bz2 $(SRC_DIST_NAME) || $(RM) $(SRC_DIST_NAME)-src.tar.bz2
+VERSION :
+ echo $(ProjectVersion) >VERSION
-dist-package-tar-gz ::
- $(TAR) chzf $(SRC_DIST_NAME)-src.tar.gz $(SRC_DIST_NAME) || $(RM) $(SRC_DIST_NAME)-src.tar.gz
+dist :: VERSION
-dist-package-zip ::
- cd ..; $(LN_S) $(FPTOOLS_TOP_ABS) $(SRC_DIST_NAME) && \
- $(ZIP) $(ZIP_OPTS) -r $(SRC_DIST_NAME)-src.zip $(SRC_DIST_PATHS)
+dist ::
+ $(RM) -rf $(SRC_DIST_DIR)
+ $(RM) $(SRC_DIST_NAME).tar.gz
+ mkdir $(SRC_DIST_DIR)
+ ( cd $(SRC_DIST_DIR) \
+ && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \
+ && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \
+ && $(MAKE) distclean \
+ && $(RM) -rf compiler/stage[123] mk/build.mk \
+ && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \
+ )
+ tar chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL)
+ $(RM) -rf $(EXTRA_LIBS)
+ tar chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL)
+
+# Upload the distribution(s)
+# Retrying is to work around buggy firewalls that corrupt large file transfers
+# over SSH.
+ifneq "$(PublishLocation)" ""
+dist ::
+ @for i in 0 1 2 3 4 5 6 7 8 9; do \
+ echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist"; \
+ if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist; then break; fi\
+ done
+ @for i in 0 1 2 3 4 5 6 7 8 9; do \
+ echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist"; \
+ if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist; then break; fi\
+ done
+endif
# -----------------------------------------------------------------------------
# HC file bundles
-hc-file-bundle : project-check
- $(RM) -r $(ProjectNameShort)-$(ProjectVersion)
- $(LN_S) . $(ProjectNameShort)-$(ProjectVersion)
- $(FIND) $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler \
- $(ProjectNameShort)-$(ProjectVersion)/ghc/utils \
- $(ProjectNameShort)-$(ProjectVersion)/libraries -follow \
+hc-file-bundle :
+ $(RM) -r ghc-$(ProjectVersion)
+ $(LN_S) . ghc-$(ProjectVersion)
+ $(FIND) ghc-$(ProjectVersion)/compiler \
+ ghc-$(ProjectVersion)/utils \
+ ghc-$(ProjectVersion)/compat \
+ ghc-$(ProjectVersion)/libraries -follow \
\( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go
- for f in `$(FIND) $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler $(ProjectNameShort)-$(ProjectVersion)/ghc/utils $(ProjectNameShort)-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \
+ for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \
if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \
echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \
fi; \
done;
- echo $(ProjectNameShort)-$(ProjectVersion)/ghc/rts/AutoApply.hc >> hc-files-to-go
- echo $(ProjectNameShort)-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go
- echo $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler/parser/Parser.hs >> hc-files-to-go
- echo $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler/parser/ParserCore.hs >> hc-files-to-go
- echo $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler/main/ParsePkgConf.hs >> hc-files-to-go
- echo $(ProjectNameShort)-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
- tar czf $(ProjectNameShort)-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go`
+ for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \
+ if test "x$$f" != "x"; then \
+ echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \
+ fi; \
+ done;
+ echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go
+ echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go
+ echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go
+ echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go
+ echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
+ tar czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go`
+
+# -----------------------------------------------------------------------------
+# Cleaning
CLEAN_FILES += hc-files-to-go *-hc.tar.gz
+DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \
+ ghc.spec docs/users_guide/ug-book.xml
+
+# don't clean config.mk: it's needed when cleaning stuff later on
+LATE_DIST_CLEAN_FILES += mk/config.mk
+
+# VERSION is shipped in a source dist
+MAINTAINER_CLEAN_FILES += VERSION
+
+extraclean::
+ $(RM) -rf autom4te.cache
+
# -----------------------------------------------------------------------------
# Turn off target.mk's rules for 'all', 'boot' and 'install'.
projects / ghc-hetmet.git / blobdiff