include $(TOP)/mk/boilerplate.mk
+ifeq "$(GhcThreaded)$(GhcProfiled)" "YESYES"
+$(error Cannot make GHC both threaded and profiled)
+endif
+
#-----------------------------------------------------------------------------
# Counting source code lines
count :
./count_lines $(USER_SRCS)
-#-----------------------------------------------------------------------------
-# Building ghc different ways (default is just `normal' sequential)
-
-WAYS=$(GhcCompilerWays)
-
# -----------------------------------------------------------------------------
# Bootstrapping
done
else
for i in */*hi-boot*; do \
- $(LN_S) -f ../../$$i stage$(stage)/$$i || true ; \
+ ($(RM) -f stage$(stage)/$$i \
+ && $(LN_S) ../../$$i stage$(stage)/$$i) || true ; \
done
endif
endif
GHC_PROG=$(odir)/ghc-$(ProjectVersion)
endif
-ifneq "$(stage)" "2"
+ifeq "$(stage)" "1"
HS_PROG = $(GHC_PROG)
endif
@echo "cProjectVersionInt = \"$(ProjectVersionInt)\"" >> $(CONFIG_HS)
@echo "cProjectPatchLevel = \"$(ProjectPatchLevel)\"" >> $(CONFIG_HS)
@echo "cBooterVersion = \"$(GhcVersion)\"" >> $(CONFIG_HS)
+ @echo "cStage = STAGE" >> $(CONFIG_HS)
@echo "cHscIfaceFileVersion = \"$(HscIfaceFileVersion)\"" >> $(CONFIG_HS)
@echo "cGhcWithNativeCodeGen = \"$(GhcWithNativeCodeGen)\"" >> $(CONFIG_HS)
@echo "cGhcUnregisterised = \"$(GhcUnregisterised)\"" >> $(CONFIG_HS)
+ @echo "cGhcEnableTablesNextToCode = \"$(GhcEnableTablesNextToCode)\"" >> $(CONFIG_HS)
@echo "cLeadingUnderscore = \"$(LeadingUnderscore)\"" >> $(CONFIG_HS)
@echo "cRAWCPP_FLAGS = \"$(RAWCPP_FLAGS)\"" >> $(CONFIG_HS)
@echo "cGCC = \"$(WhatGccIsCalled)\"" >> $(CONFIG_HS)
ALL_DIRS = \
utils basicTypes types hsSyn prelude rename typecheck deSugar coreSyn \
- specialise simplCore stranal stgSyn simplStg codeGen main \
+ vectorise specialise simplCore stranal stgSyn simplStg codeGen main \
profiling parser cprAnalysis ndpFlatten iface cmm
# Make sure we include Config.hs even if it doesn't exist yet...
# -----------------------------------------------------------------------------
# Building a compiler with interpreter support
#
-# The interpreter, GHCi interface, and Template Haskell are only
+# The interpreter, GHCi interface, Template Haskell and Hpc are only
# enabled when we are bootstrapping with the same version of GHC, and
# the interpreter is supported on this platform.
+ifeq "$(bootstrapped)" "YES"
+SRC_HC_OPTS += -package hpc -package bytestring
+PKG_DEPENDS += hpc bytestring
+endif
+
ifeq "$(GhcWithInterpreter) $(bootstrapped)" "YES YES"
# Yes, include the interepreter, readline, and Template Haskell extensions
-SRC_HC_OPTS += -DGHCI -DBREAKPOINT -package template-haskell
+SRC_HC_OPTS += -DGHCI -package template-haskell
PKG_DEPENDS += template-haskell
+# Should GHCI be building info tables in the TABLES_NEXT_TO_CODE style
+# or not?
+ifeq "$(GhcEnableTablesNextToCode) $(GhcUnregisterised)" "YES NO"
+SRC_HC_OPTS += -DGHCI_TABLES_NEXT_TO_CODE
+endif
+
+ifeq "$(GhcThreaded)" "YES"
# Use threaded RTS with GHCi, so threads don't get blocked at the prompt.
-SRC_HC_OPTS += -threaded
+SRC_LD_OPTS += -threaded
+endif
+ifeq "$(GhcProfiled)" "YES"
+SRC_LD_OPTS += -prof
+endif
ALL_DIRS += ghci
SRC_HC_OPTS += \
-cpp -fglasgow-exts -fno-generics -Rghc-timing \
- -I. -IcodeGen -InativeGen -Iparser
+ -I. -Iparser
# Omitted: -I$(GHC_INCLUDE_DIR)
# We should have -I$(GHC_INCLUDE_DIR) in SRC_HC_OPTS,
PKG_DEPENDS += Cabal
endif
-# We use Text.Regex which is in regex-compat with GHC 6.6+
-ifeq "$(bootstrapped)" "YES"
-SRC_HC_OPTS += -package regex-compat
-PKG_DEPENDS += regex-compat
-else
-ifeq "$(ghc_ge_605)" "YES"
-SRC_HC_OPTS += -package regex-compat
-endif
-endif
-
ifeq "$(ghc_ge_603)" "YES"
# Ignore lang, to avoid potential clash with the Generics module if
# lang happens to be a dependency of some exposed package in the local
# -----------------------------------------------------------------------------
# create ghc-inplace, a convenient way to run ghc from the build tree...
+# See comments in $(FPTOOLS_TOP)/utils/ghc-pkg/Makefile for why we use
+# a real binary here rather than a shell script.
-all :: $(odir)/ghc-inplace ghc-inplace
+INPLACE_C = ghc-inplace.c
+INPLACE_PROG = $(odir)/ghc-inplace$(exeext)
+EXCLUDED_SRCS += $(INPLACE_C)
-$(odir)/ghc-inplace : $(GHC_PROG)
- @$(RM) $@
- echo '#!/bin/sh' >>$@
- echo exec $(GHC_COMPILER_DIR_ABS)/$(GHC_PROG) '-B$(subst \,\\,$(FPTOOLS_TOP_ABS_PLATFORM))' '"$$@"' >>$@
- chmod 755 $@
+# FPTOOLS_TOP_ABS platform uses backslashes, at least on Cygwin, but that
+# will go wrong when we use it in a Haskell string below.
+TOP_ABS=$(subst \\,/,$(FPTOOLS_TOP_ABS_PLATFORM))
+
+GHC_PATH=$(TOP_ABS)/$(GHC_COMPILER_DIR_REL)/$(GHC_PROG)
+
+$(INPLACE_PROG): $(INPLACE_C)
+ $(HC) -cpp -optc-DGHC_PATH=\"$(GHC_PATH)\" -optc-DTOP_ABS=\"$(TOP_ABS)\" $< -o $@
-ghc-inplace : stage1/ghc-inplace
- $(LN_S) -f $< $@
+all :: $(INPLACE_PROG)
+
+CLEAN_FILES += $(INPLACE_PROG)
ifeq "$(stage)" "1"
+ghc-inplace : $(INPLACE_PROG)
+ $(RM) -f $@ && $(LN_S) $< $@
+
+all :: ghc-inplace
+
CLEAN_FILES += ghc-inplace
endif
-CLEAN_FILES += $(odir)/ghc-inplace
-
#-----------------------------------------------------------------------------
# install
#-----------------------------------------------------------------------------
# Building the GHC package
-# The GHC package is made from the stage 2 build. Fortunately the
-# package build system framework more or less does the right thing for
-# us here.
+# The GHC package is made from the stage 2 build and later.
+# Fortunately the package build system framework more or less does the
+# right thing for us here.
-ifeq "$(stage)" "2"
+ifneq "$(findstring $(stage), 2 3)" ""
+BUILD_GHC_PACKAGE=YES
+endif
+
+ifeq "$(BUILD_GHC_PACKAGE)" "YES"
PACKAGE = ghc
HIERARCHICAL_LIB = NO
VERSION = $(ProjectVersion)
PKG_DEPENDS += base haskell98
PACKAGE_CPP_OPTS += -DPKG_DEPENDS='$(PKG_DEPENDS)'
+PACKAGE_CPP_OPTS += -DSTAGE='"$(stage)"'
# Omit Main from the library, the client will want to plug their own Main in
-LIBOBJS = $(filter-out $(odir)/main/Main.o $(odir)/parser/hschooks.o, $(OBJS))
+LIBOBJS = $(filter-out $(odir)/main/Main.o $(odir)/parser/hschooks.o \
+ $(odir)/main/Main.p_o $(odir)/parser/hschooks.p_o, \
+ $(OBJS))
# disable splitting: it won't really help with GHC, and the specialised
# build system for compiler/ isn't set up to handle it.
HS_IFACES = $(addsuffix .$(way_)hi,$(basename $(HS_OBJS)))
# Haddock can't handle recursive modules currently, so we disable it for now.
-NO_HADDOCK_DOCS = YES
+HADDOCK_DOCS = NO
-# Don't build the GHC binary as normal, because we need to link it
-# against the GHC package. The GHC binary itself is built by
-# compiling Main.o separately and linking it with -package ghc. This is
-# done using a separate Makefile:
+# Tell package.mk not to set $(HC)
+NO_SET_HC = YES
-all :: $(GHC_PROG)
+# The stage 2 GHC binary itself is built by compiling main/Main.hs
+# (the same as used in stage 1) against the GHC package.
+#
+# This is done by compiling Main.hs separately and linking it with
+# -package ghc. This is done using a separate Makefile, Makefile.ghcbin
+# Why? See comments in Makefile.ghcbin
+
+# The stage 2 and stage 3 package.conf.in files are different, because they
+# point to either the stage2/ or stage3/ dirs in import-dirs. Hence before
+# linking the ghc binary we must install the correct version of the package
+# configuration. Yeuch... maybe one day this will all be done more cleanly.
+STAMP_PKG_CONF = $(GHC_DRIVER_DIR)/stamp-pkg-conf-$(PACKAGE)
+
+ifeq "$(GhcBuildDylibs)" "YES"
+ifeq "$(darwin_TARGET_OS)" "1"
+GhcLibraryName=libHS$(PACKAGE)$(_way)_dyn.dylib
+else
+GhcLibraryName=libHS$(PACKAGE)$(_way)_dyn.so
+endif
+else
+GhcLibraryName=libHS$(PACKAGE)$(_way).a
+endif
-$(GHC_PROG) : libHS$(PACKAGE)$(_way).a main/Main.hs
+ifneq "$(DOING_BIN_DIST)" "YES"
+$(GHC_PROG) : $(GhcLibraryName) main/Main.hs
+ $(RM) package.conf.inplace
+ $(RM) $(STAMP_PKG_CONF)
+ $(MAKE) $(STAMP_PKG_CONF)
$(MAKE) -f Makefile.ghcbin $(MFLAGS) HS_PROG=$(GHC_PROG) $@
+endif
+# Propagate standard targets to Makefile.ghcbin
docs runtests $(BOOT_TARGET) TAGS clean distclean mostlyclean maintainer-clean $(INSTALL_TARGET) $(INSTALL_DOCS_TARGET) html chm HxS ps dvi txt::
$(MAKE) -f Makefile.ghcbin $(MFLAGS) $@
endif
TAGS_HS_SRCS = parser/Parser.y.pp $(filter-out $(DERIVED_SRCS) main/Config.hs parser/Parser.y, $(sort $(SRCS)))
-
include $(TOP)/mk/target.mk
+ifeq "$(BUILD_GHC_PACKAGE)" "YES"
+ifeq "$(way)" ""
+all :: $(GHC_PROG)
+endif
+endif
+
+$(odir)/main/Config.$(way_)o: SRC_HC_OPTS+=-DSTAGE='"$(stage)"'
+
+#-----------------------------------------------------------------------------
+# binary-dist
+
+ifeq "$(DOING_BIN_DIST)" "YES"
+# This is derived from the sources when we are in a source tree, but we
+# don't have any sources in a bindist, so we have to shortcut it
+HS_IFACES := $(wildcard stage$(stage)/*/*.hi)
+endif
+
+binary-dist:
+ $(INSTALL_DIR) $(BIN_DIST_DIR)/compiler
+ $(INSTALL_DIR) $(BIN_DIST_DIR)/compiler/stage$(stage)
+ echo "stage=$(stage)" > $(BIN_DIST_DIR)/compiler/Makefile
+ cat Makefile >> $(BIN_DIST_DIR)/compiler/Makefile
+ $(INSTALL_DATA) package.conf.in $(BIN_DIST_DIR)/compiler/
+ set -e; for d in stage$(stage)/*/; do $(INSTALL_DIR) $(BIN_DIST_DIR)/compiler/$$d; done
+ set -e; for f in $(HS_IFACES); do $(INSTALL_DATA) $$f $(BIN_DIST_DIR)/compiler/$$f; done
+ifneq "$(INSTALL_LIBS)" ""
+ set -e; for f in $(INSTALL_LIBS); do $(INSTALL_DATA) $$f $(BIN_DIST_DIR)/compiler/$$f; done
+endif
+ifneq "$(INSTALL_PROGS)" ""
+ set -e; for f in $(INSTALL_PROGS); do $(INSTALL_PROGRAM) $$f $(BIN_DIST_DIR)/compiler/$$f; done
+endif
+ifneq "$(INSTALL_LIBEXECS)" ""
+ set -e; for f in $(INSTALL_LIBEXECS); do $(INSTALL_PROGRAM) $$f $(BIN_DIST_DIR)/compiler/$$f; done
+endif
+
+# -----------------------------------------------------------------------------
+# Explicit dependencies
+
+# Some .hs files #include other source files, but since ghc -M doesn't spit out
+# these dependencies we have to include them manually.
+
+# We don't add dependencies on HsVersions.h, ghcautoconf.h, or ghc_boot_platform.h,
+# because then modifying one of these files would force recompilation of everything,
+# which is probably not what you want. However, it does mean you have to be
+# careful to recompile stuff you need if you reconfigure or change HsVersions.h.
+
+# Aargh, these don't work properly anyway, because GHC's recompilation checker
+# just reports "compilation NOT required". Do we have to add -no-recomp for each
+# of these .hs files? I haven't done anything about this yet.
+
+$(odir)/codeGen/Bitmap.$(way_)o : ../includes/MachDeps.h
+$(odir)/codeGen/CgCallConv.$(way_)o : ../includes/StgFun.h
+$(odir)/codeGen/CgProf.$(way_)o : ../includes/MachDeps.h
+$(odir)/codeGen/CgProf.$(way_)o : ../includes/Constants.h
+$(odir)/codeGen/CgProf.$(way_)o : ../includes/DerivedConstants.h
+$(odir)/codeGen/CgTicky.$(way_)o : ../includes/DerivedConstants.h
+$(odir)/codeGen/ClosureInfo.$(way_)o : ../includes/MachDeps.h
+$(odir)/codeGen/SMRep.$(way_)o : ../includes/MachDeps.h
+$(odir)/codeGen/SMRep.$(way_)o : ../includes/ClosureTypes.h
+$(odir)/ghci/ByteCodeAsm.$(way_)o : ../includes/Bytecodes.h
+$(odir)/ghci/ByteCodeFFI.$(way_)o : nativeGen/NCG.h
+$(odir)/ghci/ByteCodeInstr.$(way_)o : ../includes/MachDeps.h
+$(odir)/ghci/ByteCodeItbls.$(way_)o : ../includes/ClosureTypes.h
+$(odir)/ghci/ByteCodeItbls.$(way_)o : nativeGen/NCG.h
+$(odir)/main/Constants.$(way_)o : ../includes/MachRegs.h
+$(odir)/main/Constants.$(way_)o : ../includes/Constants.h
+$(odir)/main/Constants.$(way_)o : ../includes/MachDeps.h
+$(odir)/main/Constants.$(way_)o : ../includes/DerivedConstants.h
+$(odir)/main/Constants.$(way_)o : ../includes/GHCConstants.h
+$(odir)/nativeGen/AsmCodeGen.$(way_)o : nativeGen/NCG.h
+$(odir)/nativeGen/MachCodeGen.$(way_)o : nativeGen/NCG.h
+$(odir)/nativeGen/MachCodeGen.$(way_)o : ../includes/MachDeps.h
+$(odir)/nativeGen/MachInstrs.$(way_)o : nativeGen/NCG.h
+$(odir)/nativeGen/MachRegs.$(way_)o : nativeGen/NCG.h
+$(odir)/nativeGen/MachRegs.$(way_)o : ../includes/MachRegs.h
+$(odir)/nativeGen/PositionIndependentCode.$(way_)o : nativeGen/NCG.h
+$(odir)/nativeGen/PprMach.$(way_)o : nativeGen/NCG.h
+$(odir)/nativeGen/RegAllocInfo.$(way_)o : nativeGen/NCG.h
+$(odir)/typecheck/TcForeign.$(way_)o : nativeGen/NCG.h
+$(odir)/utils/Binary.$(way_)o : ../includes/MachDeps.h
+$(odir)/utils/FastMutInt.$(way_)o : ../includes/MachDeps.h
+
# -----------------------------------------------------------------------------
# Dependencies
$(MKDEPENDHS) -M -optdep-f -optdep.depend-BASE $(foreach way,$(WAYS),-optdep-s -optdep$(way)) $(foreach obj,$(MKDEPENDHS_OBJ_SUFFICES),-osuf $(obj)) $(MKDEPENDHS_OPTS) $(filter-out -split-objs, $(MKDEPENDHS_HC_OPTS)) $(HS_SRCS)
endif
$(MKDEPENDC) -f .depend-BASE $(MKDEPENDC_OPTS) $(foreach way,$(WAYS),-s $(way)) -- $(CC_OPTS) -- $(C_SRCS)
- $(PERL) -pe 'binmode(stdin); binmode(stdout); s@^(\S*\.o)@stage$(stage)/$$1@g; s@(\S*\.hi)@stage$(stage)/$$1@g; s@^.*/compat.*$$@@g;' <.depend-BASE >.depend-$(stage)
+ $(PERL) -pe 'binmode(stdin); binmode(stdout); s@(\S*[._]o)@stage$(stage)/$$1@g; s@(\S*[._]hi)@stage$(stage)/$$1@g; s@^.*/compat.*$$@@g;' <.depend-BASE >.depend-$(stage)
# The binmode stuff tells perl not to add stupid ^M's to the output
#
# The /lib/compat replacement is to workaround a bug in the
projects / ghc-hetmet.git / blobdiff