# Usage:
#
-# ./darcs-all [-q] [-s] [-i] [-r repo] [--nofib] [--testsuite] get [darcs get flags]
-# This gets the GHC core repos, if they do not already exist.
+# ./darcs-all [-q] [-s] [-i] [-r repo]
+# [--nofib] [--testsuite] [--checked-out] cmd [darcs flags]
+#
+# Applies the darcs command "cmd" to each repository in the tree.
+#
+# e.g.
+# ./darcs-all -r http://darcs.haskell.org/ghc get
+# To get any repos which do not exist in the local tree
+#
+# ./darcs-all -r ~/ghc-validate push
+# To push all your repos to the ~/ghc-validate tree
+#
+# ./darcs-all pull -a
+# To pull everything from the default repos
+#
+# ./darc-all push --dry-run
+# To see what local patches you have relative to the main repos
+#
+# -------------- Flags -------------------
# -q says to be quite, and -s to be silent.
+#
# -i says to ignore darcs errors and move on to the next repository
+#
# -r repo says to use repo as the location of package repositories
+#
+# --checked-out says that the remote repo is in checked-out layout, as
+# opposed to the layout used for the main repo. By default a repo on
+# the local filesystem is assumed to be checked-out, and repos accessed
+# via HTTP or SSH are assumed to be in the main repo layout; use
+# --checked-out to override the latter.
+#
# --nofib, --testsuite also get the nofib and testsuite repos respectively
+#
# The darcs get flag you are most likely to want is --complete. By
# default we pass darcs the --partial flag.
#
-# ./darcs-all [-q] [-s] [-i] [-r repo] cmd [darcs cmd flags]
-# This runs the darcs "cmd" command, with any flags you give, in all
-# of the repos you have checked out. e.g.
-# ./darcs-all pull
-# ./darcs-all -q send --dry-run
-# -q says to be quite, and -s to be silent.
+# ------------ Which repos to use -------------
+# darcs-all uses the following algorithm to decide which remote repos to use
+#
+# It always computes the remote repos from a single base, $repo_base
+# How is $repo_base set?
+# If you say "-r repo", then that's $repo_base
+# othewise $repo_base is set thus:
+# look in _darcs/prefs/defaultrepo,
+# and remove the trailing 'ghc'
+#
+# Then darcs-all iterates over the package found in the file
+# ./packages, which has entries like:
+# libraries/array packages/array darcs
+# or, in general
+# <local-path> <remote-path> <vcs>
+#
+# If $repo_base looks like a local filesystem path, or if you give
+# the --checked-out flag, darcs-all works on repos of form
+# $repo_base/<local-path>
+# otherwise darcs-all works on repos of form
+# $repo_base/<remote-path>
+# This logic lets you say
+# both darcs-all -r http://darcs.haskell.org/ghc-6.12 pull
+# and darcs-all -r ../HEAD pull
+# The latter is called a "checked-out tree".
+
+# NB: darcs-all *ignores* the defaultrepo of all repos other than the
+# root one. So the remote repos must be laid out in one of the two
+# formats given by <local-path> and <remote-path> in the file 'packages'.
+
$| = 1; # autoflush stdout after each print, to avoid output after die
my $verbose = 2;
my $ignore_failure = 0;
+my $want_remote_repo = 0;
+my $checked_out_flag = 0;
my %tags;
# Above regex says "at least two chars before the :", to avoid
# catching Win32 drives ("C:\").
$repo_base = $repo;
- $checked_out_tree = 0;
+
+ # --checked-out is needed if you want to use a checked-out repo
+ # over SSH or HTTP
+ if ($checked_out_flag) {
+ $checked_out_tree = 1;
+ } else {
+ $checked_out_tree = 0;
+ }
# Don't drop the last part of the path if specified with -r, as
# it expects repos of the form:
my $path;
my $tag;
my @repos;
+ my $command = $_[0];
my ($repo_base, $checked_out_tree) = getrepo();
@repos = <IN>;
close IN;
- REPO: foreach (@repos) {
+ foreach (@repos) {
chomp;
- if (/^([^# ]+) +(?:([^ ]+) +)?([^ ]+) +([^ ]+)$/) {
+ if (/^([^# ]+) +([^ ]+) +([^ ]+) +([^ ]+)$/) {
$localpath = $1;
- $tag = defined($2) ? $2 : "";
+ $tag = $2;
$remotepath = $3;
if ($checked_out_tree) {
$path = "$repo_base/$localpath";
}
else {
- if ($remotepath =~ /^http:/) {
- message "Ignoring $localpath; remote is http URL";
- next REPO;
- }
- else {
- $path = "$repo_base/$remotepath";
- }
+ $path = "$repo_base/$remotepath";
}
if (-d "$localpath/_darcs") {
- darcs (@_, "--repodir", $localpath, $path);
+ if ($want_remote_repo) {
+ if ($command =~ /^opt/) {
+ # Allows ./darcs-all optimize --relink
+ darcs (@_, "--repodir", $localpath, "--sibling=$path");
+ } else {
+ darcs (@_, "--repodir", $localpath, $path);
+ }
+ } else {
+ darcs (@_, "--repodir", $localpath);
+ }
}
- elsif ($tag eq "") {
+ elsif ($tag eq "-") {
message "== Required repo $localpath is missing! Skipping";
}
else {
my ($repo_base, $checked_out_tree) = getrepo();
- if (! grep /(?:--complete|--partial)/, @_) {
+ if (! grep /(?:--complete|--partial|--lazy)/, @_) {
warning("adding --partial, to override use --complete");
$r_flags = [@_, "--partial"];
}
foreach (@repos) {
chomp;
- if (/^([^ ]+) +(?:([^ ]+) +)?([^ ]+) +([^ ]+)$/) {
+ if (/^([^ ]+) +([^ ]+) +([^ ]+) +([^ ]+)$/) {
$localpath = $1;
- $tag = defined($2) ? $2 : "";
+ $tag = $2;
$remotepath = $3;
if ($checked_out_tree) {
$path = "$repo_base/$localpath";
}
else {
- if ($remotepath =~ /^http:/) {
- $path = $remotepath;
- }
- else {
- $path = "$repo_base/$remotepath";
- }
+ $path = "$repo_base/$remotepath";
}
- if (($tag eq "") || defined($tags{$tag})) {
+ if (($tag eq "-") || defined($tags{$tag})) {
if (-d $localpath) {
warning("$localpath already present; omitting");
}
elsif ($arg eq "--testsuite") {
$tags{"testsuite"} = 1;
}
+ # --extralibs tells get to also grab the extra repos.
+ # It has no effect on the other commands.
+ elsif ($arg eq "--extra") {
+ $tags{"extra"} = 1;
+ }
+ elsif ($arg eq "--checked-out") {
+ $checked_out_flag = 1;
+ }
else {
unshift @_, $arg;
if (grep /^-q$/, @_) {
# Hack around whatsnew failing if there are no changes
$ignore_failure = 1;
}
+ if ($command =~ /^(pul|pus|sen|put|opt)/) {
+ $want_remote_repo = 1;
+ }
darcsall @_;
}
}
+END {
+ my $ec = $?;
+
+ message "== Checking for old bytestring repo";
+ if (-d "libraries/bytestring/_darcs") {
+ if ((system "darcs annotate --repodir libraries/bytestring --match 'hash 20080118173113-3fd76-d5b74c04372a297b585ebea4e16d524551ce5035' > /dev/null 2> /dev/null") == 0) {
+ print <<EOF;
+============================
+ATTENTION!
+
+You have an old bytestring repository in your GHC tree!
+
+Please remove it (e.g. "rm -r libraries/bytestring"), and the new
+version of bytestring will be used from a tarball instead.
+============================
+EOF
+ }
+ }
+
+ message "== Checking for bytestring tarball";
+ if (-d "libraries/bytestring" && not -d "libraries/bytestring/_darcs") {
+ print <<EOF;
+============================
+ATTENTION!
+
+You have an old bytestring in your GHC tree!
+
+Please remove it (e.g. "rm -r libraries/bytestring"), and then run
+"./darcs-all get" to get the darcs repository.
+============================
+EOF
+ }
+
+ message "== Checking for unpulled tarball patches";
+ if ((system "darcs annotate --match 'hash 20090930200358-3fd76-cab3bf4a0a9e3902eb6dd41f71712ad3a6a9bcd1' > /dev/null 2> /dev/null") == 0) {
+ print <<EOF;
+============================
+ATTENTION!
+
+You have the unpulled tarball patches in your GHC tree!
+
+Please remove them:
+ darcs unpull -p "Use mingw tarballs to get mingw on Windows"
+and say yes to each patch.
+============================
+EOF
+ }
+
+ $? = $ec;
+}
+
main(@ARGV);
projects / ghc-hetmet.git / blobdiff