the parser specifications. If you don't want to alter the
parser then this saves you having to find and install
<command>happy</command>. You will still need a working
- version of GHC (preferably version 4.08+) on your machine in
+ version of GHC (version 5.x or later) on your machine in
order to compile (most of) the sources, however.</para>
</listitem>
</varlistentry>
<listitem>
<para>Set your <literal>$CVSROOT</literal> environment variable to
<literal>:pserver:anoncvs@glass.cse.ogi.edu:/cvs</literal></para>
+ <para>If you set <literal>$CVSROOT</literal> in a shell script, be sure not to
+ have any trailing spaces on that line, otherwise CVS will respond with
+ a perplexing message like
+ <programlisting>
+ /cvs : no such repository
+ </programlisting></para>
</listitem>
<listitem>
<para>Run the command</para>
<xref linkend="projects">).</para>
<para>Remember that if you do not have
- <literal>happy</literal> installed, you need to check it out
- as well.</para>
+ <literal>happy</literal> and/or <literal>Alex</literal>
+ installed, you need to check them out as well.</para>
</listitem>
</itemizedlist>
</sect2>
<variablelist>
<varlistentry>
+ <term><literal>alex</literal></term>
+ <indexterm><primary><literal>alex</literal></primary>
+ <secondary>project</secondary></indexterm>
+ <listitem>
+ <para>The <ulink
+ url="http://www.haskell.org/alex/">Alex</ulink> lexical
+ analyser generator for Haskell.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
<term><literal>ghc</literal></term>
<indexterm><primary><literal>ghc</literal></primary>
<secondary>project</secondary></indexterm>
<term>sparc-sun-solaris2</term>
<indexterm><primary>sparc-sun-solaris2</primary></indexterm>
<listitem>
- <para>Fully supported (at least for Solaris 2.7),
+ <para>Fully supported (at least for Solaris 2.7 and 2.6),
including native-code generator.</para>
</listitem>
</varlistentry>
<varlistentry>
+ <term>sparc-unknown-openbsd</term>
+ <indexterm><primary>sparc-unknown-openbsd</primary></indexterm>
+ <listitem>
+ <para>Supported, including native-code generator. The
+ same should also be true of NetBSD</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
<term>hppa1.1-hp-hpux (HP-PA boxes running HPUX 9.x)</term>
<indexterm><primary>hppa1.1-hp-hpux</primary></indexterm>
<listitem>
<term>ia64-unknown-linux</term>
<indexterm><primary>ia64-unknown-linux</primary></indexterm>
<listitem>
+ <para>Supported, except there is no native code
+ generator.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>x86_64-unknown-linux</term>
+ <indexterm><primary>x86_64-unknown-linux</primary></indexterm>
+ <listitem>
<para>GHC currently works unregisterised. A registerised
port is in progress.</para>
</listitem>
</varlistentry>
<varlistentry>
+ <term>mips64-sgi-irix6</term>
+ <indexterm><primary>mips-sgi-irix6</primary></indexterm>
+ <listitem>
+ <para>GHC currently works unregisterised.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
<term>powerpc-ibm-aix</term>
<indexterm><primary>powerpc-ibm-aix</primary></indexterm>
<listitem>
<term>powerpc-apple-darwin</term>
<indexterm><primary>powerpc-apple-darwin</primary></indexterm>
<listitem>
- <para>Supported registerised. No native code
- generator.</para>
+ <para>Supported registerised. Native code generator is
+ almost working.</para>
</listitem>
</varlistentry>
<para>GCC 3.2 is currently known to have problems building
GHC on Sparc, but is stable on x86.</para>
- <para>GCC 3.3 currently cannot be used to build GHC, due to
- some problems with the new C preprocessor.</para>
-
<para>If your GCC dies with “internal error” on
some GHC source file, please let us know, so we can report
- it and get things improved. (Exception: on iX86
+ it and get things improved. (Exception: on x86
boxes—you may need to fiddle with GHC's
<option>-monly-N-regs</option> option; see the User's
Guide)</para>
</varlistentry>
<varlistentry>
- <term>Autoconf</term>
- <indexterm><primary>pre-supposed: Autoconf</primary></indexterm>
- <indexterm><primary>Autoconf, pre-supposed</primary></indexterm>
+ <term>Alex</term>
+ <indexterm><primary>Alex</primary></indexterm>
<listitem>
- <para>GNU Autoconf is needed if you intend to build from the
+ <para>Alex is a lexical-analyser generator for Haskell,
+ which GHC uses to generate its lexer. Like Happy, Alex is
+ written in Haskell and is a project in the CVS repository.
+ Alex distributions are available from <ulink
+ url="http://www.haskell.org/alex/">Alex's Web
+ Page</ulink>.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Autoreconf</term>
+ <indexterm><primary>pre-supposed: Autoreconf</primary></indexterm>
+ <indexterm><primary>Autoreconf, pre-supposed</primary></indexterm>
+ <listitem>
+ <para>GNU Autoreconf is needed if you intend to build from the
CVS sources, it is <emphasis>not</emphasis> needed if you
just intend to build a standard source distribution.</para>
- <para>Version 2.52 or later of autoconf is required.
+ <para>Version 2.52 or later of autoreconf is required.
NB. vesrion 2.13 will no longer work, as of GHC version
6.1.</para>
- <para>Autoconf builds the <command>configure</command>
+ <para>Autoreconf builds the <command>configure</command>
script from <filename>configure.ac</filename> and
<filename>aclocal.m4</filename>. If you modify either of
- these files, you'll need <command>autoconf</command> to
+ these files, you'll need <command>autoreconf</command> to
rebuild <filename>configure</filename>.</para>
</listitem>
</varlistentry>
want a completely standard build, then the following should
work:</para>
-<screen>$ ./configure
+<screen>$ autoreconf
+$ ./configure
$ make
$ make install
</screen>
<para>Change directory to
<constant>$(FPTOOLS_TOP)</constant> and
issue the command
- <command>autoconf</command><indexterm><primary>autoconf</primary></indexterm>
+<ProgramListing>
+autoreconf
+</ProgramListing>
+ <indexterm><primary>autoreconf</primary></indexterm>
(with no arguments). This GNU program converts
<filename><constant>$(FPTOOLS_TOP)</constant>/configure.ac</filename>
to a shell script called
<filename><constant>$(FPTOOLS_TOP)</constant>/configure</filename>.
+ If <command>autoreconf</command> bleats that it can't write the file <filename>configure</filename>,
+ then delete the latter and try again. Note that you must use <command>autoreconf</command>,
+ and not the old <command>autoconf</command>! If you erroneously use the latter, you'll get
+ a message like "No rule to make target 'mk/config.h.in'".
</para>
<para>Some projects, including GHC, have their own
configure script. If there's an
<constant>$(FPTOOLS_TOP)/<project>/configure.ac</constant>,
- then you need to run <command>autoconf</command> in that
+ then you need to run <command>autoreconf</command> in that
directory too.</para>
- <para>Both these steps are completely
+ <para>These steps are completely
platform-independent; they just mean that the
human-written file (<filename>configure.ac</filename>) can
be short, although the resulting shell script,
<para>Prepare for system configuration:</para>
<programlisting>
-$ autoconf
+$ autoreconf
</programlisting>
<para>(You can skip this step if you are starting from a
<filename>mk/config.h.in</filename>.)</para>
<para>Some projects, including GHC itself, have their own
- configure scripts, so it is necessary to run autoconf again
+ configure scripts, so it is necessary to run autoreconf again
in the appropriate subdirectories. eg:</para>
<programlisting>
-$ (cd ghc; autoconf)
+$ (cd ghc; autoreconf)
</programlisting>
</listitem>
build tree.</para>
<para>Happy can similarly be run from the build tree, using
- <filename>happy/src/happy-inplace</filename>.</para>
+ <filename>happy/src/happy-inplace</filename>, and similarly for
+ Alex and Haddock.</para>
</sect2>
<sect2>
target machine, and compiling them using gcc to get a working
GHC.</para>
- <para><emphasis>NOTE: GHC versions 5.xx and later are
- significantly harder to bootstrap from C than earlier versions.
- We recommend starting from version 4.08.2 if you need to
- bootstrap in this way.</emphasis></para>
+ <para><emphasis>NOTE: GHC versions 5.xx were hard to bootstrap
+ from C. We recommend using GHC 6.0.1 or
+ later.</emphasis></para>
- <para>HC files are architecture-dependent (but not
- OS-dependent), so you have to get a set that were generated on
- similar hardware. There may be some supplied on the GHC
- download page, otherwise you'll have to compile some up
- yourself, or start from <emphasis>unregisterised</emphasis> HC
- files - see <xref linkend="unregisterised-porting">.</para>
+ <para>HC files are platform-dependent, so you have to get a set
+ that were generated on similar hardware. There may be some
+ supplied on the GHC download page, otherwise you'll have to
+ compile some up yourself, or start from
+ <emphasis>unregisterised</emphasis> HC files - see <xref
+ linkend="unregisterised-porting">.</para>
<para>The following steps should result in a working GHC build
with full libraries:</para>
since unregisterised compilation is usually just a step on the
way to a full registerised port, we don't mind too much.</para>
- <sect3>
- <title>Building an unregisterised port</title>
+ <para>Notes on GHC portability in general: we've tried to stick
+ to writing portable code in most parts of the system, so it
+ should compile on any POSIXish system with gcc, but in our
+ experience most systems differ from the standards in one way or
+ another. Deal with any problems as they arise - if you get
+ stuck, ask the experts on
+ <email>glasgow-haskell-users@haskell.org</email>.</para>
- <para>The first step is to get some unregisterised HC files.
- Either (a) download them from the GHC site (if there are
- some available for the right version of GHC), or
- (b) build them yourself on any machine with a working
- GHC. If at all possible this should be a machine with the
- same word size as the target.</para>
-
- <para>There is a script available which should automate the
- process of doing the 2-stage bootstrap necessary to get the
- unregisterised HC files - it's available in <ulink
- url="http://cvs.haskell.org/cgi-bin/cvsweb.cgi/fptools/distrib/cross-port"><filename>fptools/distrib/cross-port</filename></ulink>
- in CVS.</para>
-
- <para>Now take these unregisterised HC files to the target
- platform and bootstrap a compiler from them as per the
- instructions in <xref linkend="sec-booting-from-hc">. In
- <filename>build.mk</filename>, you need to tell the build
- system that the compiler you're building is
- (a) unregisterised itself, and (b) builds
- unregisterised binaries. This varies depending on the GHC
- version you're bootstraping:</para>
+ <para>Lots of useful information about the innards of GHC is
+ available in the <ulink
+ url="http://www.cse.unsw.edu.au/~chak/haskell/ghc/comm/">GHC
+ Commentary</ulink>, which might be helpful if you run into some
+ code which needs tweaking for your system.</para>
-<programlisting>
-# build.mk for GHC 4.08.x
-GhcWithRegisterised=NO
-</programlisting>
+ <sect3>
+ <title>Cross-compiling to produce an unregisterised GHC</title>
+
+ <para>In this section, we explain how to bootstrap GHC on a
+ new platform, using unregisterised intermediate C files. We
+ haven't put a great deal of effort into automating this
+ process, for two reasons: it is done very rarely, and the
+ process usually requires human intervention to cope with minor
+ porting issues anyway.</para>
+
+ <para>The following step-by-step instructions should result in
+ a fully working, albeit unregisterised, GHC. Firstly, you
+ need a machine that already has a working GHC (we'll call this
+ the <firstterm>host</firstterm> machine), in order to
+ cross-compile the intermediate C files that we will use to
+ bootstrap the compiler on the <firstterm>target</firstterm>
+ machine.</para>
+
+ <itemizedlist>
+ <listitem>
+ <para>On the target machine:</para>
+
+ <itemizedlist>
+ <listitem>
+ <para>Unpack a source tree (preferably a released
+ version). We will call the path to the root of this
+ tree <replaceable>T</replaceable>.</para>
+ </listitem>
+
+ <listitem>
+<screen>
+$ cd <replaceable>T</replaceable>
+$ ./configure --enable-hc-boot --enable-hc-boot-unregisterised
+</screen>
+
+ <para>You might need to update
+ <filename>configure.in</filename> to recognise the new
+ architecture, and re-generate
+ <filename>configure</filename> with
+ <literal>autoreconf</literal>.</para>
+ </listitem>
+
+ <listitem>
+<screen>
+$ cd <replaceable>T</replaceable>/ghc/includes
+$ make config.h
+</screen>
+ </listitem>
+ </itemizedlist>
+ </listitem>
+
+ <listitem>
+ <para>On the host machine:</para>
+
+ <itemizedlist>
+ <listitem>
+ <para>Unpack a source tree (same released version). Call
+ this directory <replaceable>H</replaceable>.</para>
+ </listitem>
+
+ <listitem>
+<screen>
+$ cd <replaceable>H</replaceable>
+$ ./configure
+</screen>
+ </listitem>
+
+ <listitem>
+ <para>Create
+ <filename><replaceable>H</replaceable>/mk/build.mk</filename>,
+ with the following contents:</para>
<programlisting>
-# build.mk for GHC 5.xx and 6.x
-GhcUnregisterised=YES
+GhcUnregisterised = YES
+GhcLibHcOpts = -O -H32m -keep-hc-files
+GhcLibWays =
+SplitObjs = NO
+GhcWithNativeCodeGen = NO
+GhcWithInterpreter = NO
+GhcStage1HcOpts = -O -H32m -fasm
+GhcStage2HcOpts = -O -fvia-C -keep-hc-files
</programlisting>
+ </listitem>
- <para>Versions 5.xx and 6.x only: use the option
- <option>--enable-hc-boot-unregisterised</option> instead of
- <option>--enable-hc-boot</option> when running
- <filename>./configure</filename>.</para>
-
- <para>The build may not go through cleanly. We've tried to
- stick to writing portable code in most parts of the compiler,
- so it should compile on any POSIXish system with gcc, but in
- our experience most systems differ from the standards in one
- way or another. Deal with any problems as they arise - if you
- get stuck, ask the experts on
- <email>glasgow-haskell-users@haskell.org</email>.</para>
-
- <para>Once you have the unregisterised compiler up and
- running, you can use it to start a registerised port. The
- following sections describe the various parts of the system
- that will need architecture-specific tweaks in order to get a
- registerised build going.</para>
-
- <para>Lots of useful information about the innards of GHC is
- available in the <ulink
- url="http://www.cse.unsw.edu.au/~chak/haskell/ghc/comm/">GHC
- Commentary</ulink>, which might be helpful if you run into
- some code which needs tweaking for your system.</para>
+ <listitem>
+ <para>Edit
+ <filename><replaceable>H</replaceable>/mk/config.mk</filename>:</para>
+ <itemizedlist>
+ <listitem>
+ <para>change <literal>TARGETPLATFORM</literal>
+ appropriately, and set the variables involving
+ <literal>TARGET</literal> to the correct values for
+ the target platform. This step is necessary because
+ currently <literal>configure</literal> doesn't cope
+ with specifying different values for the
+ <literal>--host</literal> and
+ <literal>--target</literal> flags.</para>
+ </listitem>
+ <listitem>
+ <para>copy <literal>LeadingUnderscore</literal>
+ setting from target.</para>
+ </listitem>
+ </itemizedlist>
+ </listitem>
+
+ <listitem>
+ <para>Copy
+ <filename><replaceable>T</replaceable>/ghc/includes/config.h</filename>
+ to
+ <filename><replaceable>H</replaceable>/ghc/includes</filename>.
+ Note that we are building on the host machine, using the
+ target machine's <literal>config.h</literal> file. This
+ is so that the intermediate C files generated here will
+ be suitable for compiling on the target system.</para>
+
+ </listitem>
+
+ <listitem>
+ <para>Touch <literal>config.h</literal>, just to make
+ sure it doesn't get replaced during the build:</para>
+<screen>
+$ touch <replaceable>H</replaceable>/ghc/includes/config.h</screen>
+ </listitem>
+
+ <listitem>
+ <para>Now build the compiler:</para>
+<screen>
+$ cd <replaceable>H</replaceable>/glafp-utils && make boot && make
+$ cd <replaceable>H</replaceable>/ghc && make boot && make
+</screen>
+ <para>Don't worry if the build falls over in the RTS, we
+ don't need the RTS yet.</para>
+ </listitem>
+
+ <listitem>
+<screen>
+$ cd <replaceable>H</replaceable>/libraries
+$& make boot && make
+</screen>
+ </listitem>
+
+ <listitem>
+<screen>
+$ cd <replaceable>H</replaceable>/ghc
+$ make boot stage=2 && make stage=2
+</screen>
+ </listitem>
+
+ <listitem>
+ <screen>
+$ cd <replaceable>H</replaceable>/ghc/utils
+$ make clean
+$ make -k HC=<replaceable>H</replaceable>/ghc/compiler/stage1/ghc-inplace \
+ EXTRA_HC_OPTS='-O -fvia-C -keep-hc-files'
+</screen>
+ </listitem>
+
+ <listitem>
+<screen>
+$ cd <replaceable>H</replaceable>
+$ make hc-file-bundle Project=Ghc
+</screen>
+ </listitem>
+
+ <listitem>
+ <para>copy
+ <filename><replaceable>H</replaceable>/*-hc.tar.gz</filename>
+ to <filename><replaceable>T</replaceable>/..</filename>.</para>
+ </listitem>
+ </itemizedlist>
+ </listitem>
+
+ <listitem>
+ <para>On the target machine:</para>
+
+ <para>At this stage we simply need to bootstrap a compiler
+ from the intermediate C files we generated above. The
+ process of bootstrapping from C files is automated by the
+ script in <literal>distrib/hc-build</literal>, and is
+ described in <xref linkend="sec-booting-from-hc">.</para>
+
+<screen>
+$ ./distrib/hc-build --enable-hc-boot-unregisterised
+</screen>
+
+ <para>However, since this is a bootstrap on a new machine,
+ the automated process might not run to completion the
+ first time. For that reason, you might want to treat the
+ <literal>hc-build</literal> script as a list of
+ instructions to follow, rather than as a fully automated
+ script. This way you'll be able to restart the process
+ part-way through if you need to fix anything on the
+ way.</para>
+
+ <para>Don't bother with running
+ <literal>make install</literal> in the newly
+ bootstrapped tree; just use the compiler in that tree to
+ build a fresh compiler from scratch, this time without
+ booting from C files. Before doing this, you might want
+ to check that the bootstrapped compiler is generating
+ working binaries:</para>
+
+<screen>
+$ cat >hello.hs
+main = putStrLn "Hello World!\n"
+^D
+$ <replaceable>T</replaceable>/ghc/compiler/ghc-inplace hello.hs -o hello
+$ ./hello
+Hello World!
+</screen>
+
+ <para>Once you have the unregisterised compiler up and
+ running, you can use it to start a registerised port. The
+ following sections describe the various parts of the
+ system that will need architecture-specific tweaks in
+ order to get a registerised build going.</para>
+
+ </listitem>
+ </itemizedlist>
</sect3>
<sect3>
<para>To support GHCi, you need to port the dynamic linker
(<filename>fptools/ghc/rts/Linker.c</filename>). The linker
currently supports the ELF and PEi386 object file formats - if
- your platform uses one of these then you probably don't have
- to do anything except fiddle with the
- <literal>#ifdef</literal>s at the top of
- <filename>Linker.c</filename> to tell it about your OS.</para>
+ your platform uses one of these then things will be
+ significantly easier. The majority of Unix platforms use the
+ ELF format these days. Even so, there are some
+ machine-specific parts of the ELF linker: for example, the
+ code for resolving particular relocation types is
+ machine-specific, so some porting of this code to your
+ architecture will probaly be necessary.</para>
<para>If your system uses a different object file format, then
you have to write a linker — good luck!</para>
<para> Install Cygwin from <ulink url="http://www.cygwin.com/">http://www.cygwin.com/</ulink>.
The installation process is straightforward; we install it in <Filename>c:/cygwin</Filename>.
-During the installation dialogue, make sure that you select:
-<command>cvs</command>, <command>openssh</command>,
-<command>autoconf</command>,
-<command>binutils</command> (includes ld and (I think) ar),
-<command>gcc</command>,
-<command>flex</command>,
-<command>make</command>.
-
+During the installation dialogue, make sure that you select all of the following:
+<itemizedlist>
+<listitem><para>
+ <command>cvs</command>,
+</para></listitem>
+<listitem><para>
+ <command>openssh</command>,
+</para></listitem>
+<listitem><para>
+ <command>autoreconf</command>,
+</para></listitem>
+<listitem><para>
+ <command>automake</command>,
+</para></listitem>
+<listitem><para>
+ <command>binutils</command> (includes ld and (I think) ar),
+</para></listitem>
+<listitem><para>
+ <command>gcc</command>,
+</para></listitem>
+<listitem><para>
+ <command>flex</command>,
+</para></listitem>
+<listitem><para>
+ <command>make</command>.
+</para></listitem>
+</itemizedlist>
+If you miss out any of these, strange things will happen to you. To see thse packages,
+click on the "View" button in the "Select Packages"
+stage of Cygwin's installation dialogue, until the view says "Full". The default view, which is
+"Category" isn't very helpful, and the "View" button is rather unobtrousive.
</para>
<para> Now set the following user environment variables:
<itemizedlist>
</listitem>
<listitem><para> Set <constant>SHELL</constant> to
-<Filename>c:/cygwin/bin/sh</Filename>. When you invoke a shell in Emacs, this
+<Filename>c:/cygwin/bin/bash</Filename>. When you invoke a shell in Emacs, this
<constant>SHELL</constant> is what you get.
</para></listitem>
</para>
</listitem>
+ <listitem>
+ <para>Install Alex. This can be done by building from the
+ source distribution in the usual way. Sources are
+ available from <ulink
+ url="http://www.haskell.org/alex">http://www.haskell.org/alex</ulink>.</para>
+ </listitem>
<listitem>
<para>GHC uses the <emphasis>mingw</emphasis> C compiler to
<ItemizedList>
<listitem>
<para>
-Run <Command>autoconf</Command> both in <filename>fptools</filename>
+Run <Command>autoreconf</Command> both in <filename>fptools</filename>
and in <filename>fptools/ghc</filename>. If you omit the latter step you'll
get an error when you run <filename>./configure</filename>:
<Screen>
</para>
</listitem>
-<listitem> <para><command>autoconf</command> seems to create the file <filename>configure</filename>
-read-only. So if you need to run autoconf again (which I sometimes do for safety's sake),
+<listitem> <para><command>autoreconf</command> seems to create the file <filename>configure</filename>
+read-only. So if you need to run autoreconf again (which I sometimes do for safety's sake),
you get
<screen>
-/usr/bin/autoconf: cannot create configure: permission denied
+/usr/bin/autoreconf: cannot create configure: permission denied
</screen>
Solution: delete <filename>configure</filename> first.
</para></listitem>
<listitem>
<para>
- After <command>autoconf</command> run <command>./configure</command> in
+ After <command>autoreconf</command> run <command>./configure</command> in
<filename>fptools/</filename> thus:
<Screen>
projects / ghc-hetmet.git / blobdiff