GHC new build system megapatch

[ghc-hetmet.git] / ghc / Makefile

diff --git a/ghc/Makefile b/ghc/Makefile
index ed7d24b..664df24 100644 (file)
--- a/ghc/Makefile
+++ b/ghc/Makefile
@@ -1,155 +1,16 @@
+dir = ghc
+TOP = ..
+SPEC_TARGETS = 1 2 3
+include $(TOP)/mk/sub-makefile.mk
 
-TOP=..
-include $(TOP)/mk/boilerplate.mk
-include $(TOP)/mk/cabal-flags.mk
+.PHONY: 1 2 3
 
-ifeq "$(stage)" ""
-stage=1
-endif
+1:
+       +$(TOPMAKE) stage=1 all_ghc_stage1 compiler_stage1_NO_BUILD_DEPS=YES
 
-ifeq "$(HOSTPLATFORM)" "i386-unknown-mingw32"
-INSTALL_FLAGS =
-else
-INSTALL_FLAGS = --enable-shell-wrappers
-endif
+2:
+       +$(TOPMAKE) stage=2 all_ghc_stage2 compiler_stage2_NO_BUILD_DEPS=YES
 
-# Don't strip the inplace versions, we might need to debug them
-INPLACE_INSTALL_FLAGS += --disable-executable-stripping
-
-boot:: boot.stage.$(stage)
-
-all:: build.stage.$(stage)
-
-rebuild ::
-       -$(CABAL) clean --distpref dist-stage$(stage)
-       $(RM) -rf stage$(stage)-inplace
-       $(MAKE) boot all
-
-stage1 ::
-       $(MAKE) stage=1
-
-stage2 ::
-       $(MAKE) stage=2
-
-stage3 ::
-       $(MAKE) stage=3
-
-
-ifeq "$(CLEAN_ALL_STAGES)" "YES"
-clean distclean maintainer-clean:: clean.stage.1 clean.stage.2 clean.stage.3
-else
-clean distclean maintainer-clean:: clean.stage.$(stage)
-endif
-
-ifeq "$(CLEAN_ALL_STAGES)" "YES"
-distclean maintainer-clean::
-       $(RM) -f ghc-bin.cabal
-endif
-
-clean.stage.%:
-       $(RM) -rf stage$*-inplace
-# This is a bit naughty. We ought to use:
-#      -$(CABAL) clean --distpref dist-stage$*
-# but that won't work if the Cabal file (a generated file) doesn't
-# exist. So we do this instead:
-       $(RM) -rf dist-stage$*
-
-CONFIGURE_FLAGS_STAGE1 += --flags=-ghci
-
-ifeq "$(GhcWithInterpreter)" "YES"
-CONFIGURE_FLAGS_STAGE2PLUS += --flags=ghci
-else
-CONFIGURE_FLAGS_STAGE2PLUS += --flags=-ghci
-endif
-
-ifeq "$(GhcProfiled)" "YES"
-CONFIGURE_FLAGS_STAGE2PLUS += --enable-executable-profiling
-endif
-ifeq "$(GhcDebugged)" "YES"
-CONFIGURE_FLAGS_STAGE2PLUS += --ghc-option=-debug
-endif
-ifeq "$(GhcThreaded)" "YES"
-# Use threaded RTS with GHCi, so threads don't get blocked at the prompt.
-CONFIGURE_FLAGS_STAGE2PLUS += --ghc-option=-threaded
-endif
-
-ifeq "$(BuildSharedLibs)" "YES"
-CONFIGURE_FLAGS_STAGE2PLUS += --ghc-option=-dynamic
-endif
-
-CONFIGURE_FLAGS_STAGE2 = $(CONFIGURE_FLAGS_STAGE2PLUS)
-CONFIGURE_FLAGS_STAGE3 = $(CONFIGURE_FLAGS_STAGE2PLUS)
-
-CONFIGURE_FLAGS_STAGE1 += $(USE_BOOT_CONFIGURE_FLAGS)
-CONFIGURE_FLAGS_STAGE2 += $(USE_STAGE1_CONFIGURE_FLAGS)
-CONFIGURE_FLAGS_STAGE3 += $(USE_STAGE2_CONFIGURE_FLAGS)
-CONFIGURE_FLAGS_STAGE3 += --package-db $(STAGE3_PACKAGE_CONF)
-
-CONFIGURE_FLAGS_STAGE1 += $(foreach flag, $(GhcStage1HcOpts), --ghc-option=$(flag))
-CONFIGURE_FLAGS_STAGE2 += $(foreach flag, $(GhcStage2HcOpts), --ghc-option=$(flag))
-CONFIGURE_FLAGS_STAGE3 += $(foreach flag, $(GhcStage3HcOpts), --ghc-option=$(flag))
-
-BUILD_FLAGS += $(patsubst %, --ghc-option=%, $(SRC_HC_OPTS))
-# Allow EXTRA_HC_OPTS to be used from the command line to add options 
-# when building (e.g. -v)
-BUILD_FLAGS += $(patsubst %, --ghc-option=%, $(EXTRA_HC_OPTS))
-
-# XXX In stage2+ we should really use the inplace ghc-pkg
-# It works because installPackage doesn't actually use ghc-pkg, as there's
-# no library to register
-
-ifeq "$(stage)" "1"
-ifeq "$(ghc_ge_609)" "NO"
-# GHC 6.9+ can handle cross-package recompilation checking, but
-# we don't rely on the bootstrapping compiler being able to do this.
-TOUCH_MAIN = $(RM) dist-stage1/build/ghc/ghc-tmp/Main.o
-endif
-endif
-
-dist-stage1 dist-stage2 dist-stage3: dist-stage%: boot.stage.%
-
-boot.stage.%:
-       $(CABAL) configure --distpref dist-stage$*         \
-                          $(INSTALL_DIRS_CONFIGURE_FLAGS) \
-                          $(CONFIGURE_FLAGS_STAGE$*)      \
-                          $(COMMON_CONFIGURE_FLAGS)       \
-                          --libsubdir=.                   \
-                          --datadir='$$libdir'            \
-                          --datasubdir=.
-
-build.stage.%: dist-stage%
-       $(TOUCH_MAIN)
-       $(CABAL) build     --distpref dist-stage$* $(BUILD_FLAGS)
-       $(INSTALL_PACKAGE) install '$(GHC_PKG_PROG)' 'XXX/package.conf' "" \
-                          $(FPTOOLS_TOP_ABS)/ghc/stage$*-inplace          \
-                          $(FPTOOLS_TOP_ABS)/ghc/stage$*-inplace          \
-                          '$$prefix'                                      \
-                          '$(INPLACE_DATA_DIR)'                           \
-                          '$$prefix/libexec'                              \
-                          '$$prefix/dynlib'                               \
-                          '$(INPLACE_DATA_DIR)'                           \
-                          '$$prefix/doc'                                  \
-                          '$$prefix/html'                                 \
-                          '$$prefix/haddock'                              \
-                          --distpref dist-stage$*                         \
-                          $(INPLACE_INSTALL_FLAGS)                        \
-                          $(INSTALL_FLAGS)
-
-# XXX For now we always install the stage 2 compiler
-install:
-       $(INSTALL_PACKAGE) install UNUSED UNUSED '$(DESTDIR)' '$(prefix)' \
-                          '$(prefix)' '$(bindir)' '$(libdir)'            \
-                       '$(libexecdir)' '$(dynlibdir)' '$(datadir)'    \
-                       '$(docdir)' '$(htmldir)' '$(haddockdir)'       \
-                          --distpref dist-stage2                         \
-                          $(INSTALL_FLAGS)
-
-html:
-       @:
-
-install-docs:
-       @:
-
-include $(TOP)/mk/bindist.mk
-EXE_DIST_DIR = dist-stage2
+3:
+       +$(TOPMAKE) stage=3 all_ghc_stage3 compiler_stage3_NO_BUILD_DEPS=YES