the code is through with it, it has to be freed in order to release Haskell
and C resources. Failure to do so result in memory leaks on both the C and
Haskell side.
-
*/
+
#include "PosixSource.h"
#include "Rts.h"
+#include "RtsExternal.h"
#include "RtsUtils.h"
-#include "RtsFlags.h"
-
-/* Heavily arch-specific, I'm afraid.. */
-#if defined(i386_TARGET_ARCH) || defined(sparc_TARGET_ARCH) || defined(alpha_TARGET_ARCH)
-
-#if defined(i386_TARGET_ARCH)
-/* Now here's something obscure for you:
-
- When generating an adjustor thunk that uses the C calling
- convention, we have to make sure that the thunk kicks off
- the process of jumping into Haskell with a tail jump. Why?
- Because as a result of jumping in into Haskell we may end
- up freeing the very adjustor thunk we came from using
- freeHaskellFunctionPtr(). Hence, we better not return to
- the adjustor code on our way out, since it could by then
- point to junk.
-
- The fix is readily at hand, just include the opcodes
- for the C stack fixup code that we need to perform when
- returning in some static piece of memory and arrange
- to return to it before tail jumping from the adjustor thunk.
-
- For this to work we make the assumption that bytes in .data
- are considered executable.
+#include <stdlib.h>
+
+#if defined(_WIN32)
+#include <windows.h>
+#endif
+
+#if defined(powerpc_HOST_ARCH) && defined(linux_HOST_OS)
+#include <string.h>
+#endif
+
+#ifdef LEADING_UNDERSCORE
+#define UNDERSCORE "_"
+#else
+#define UNDERSCORE ""
+#endif
+#if defined(i386_HOST_ARCH) && !defined(darwin_HOST_OS)
+/*
+ Now here's something obscure for you:
+
+ When generating an adjustor thunk that uses the C calling
+ convention, we have to make sure that the thunk kicks off
+ the process of jumping into Haskell with a tail jump. Why?
+ Because as a result of jumping in into Haskell we may end
+ up freeing the very adjustor thunk we came from using
+ freeHaskellFunctionPtr(). Hence, we better not return to
+ the adjustor code on our way out, since it could by then
+ point to junk.
+
+ The fix is readily at hand, just include the opcodes
+ for the C stack fixup code that we need to perform when
+ returning in some static piece of memory and arrange
+ to return to it before tail jumping from the adjustor thunk.
*/
-static unsigned char __obscure_ccall_ret_code [] =
- { 0x83, 0xc4, 0x04 /* addl $0x4, %esp */
- , 0xc3 /* ret */
- };
+static void GNUC3_ATTRIBUTE(used) obscure_ccall_wrapper(void)
+{
+ __asm__ (
+ ".globl " UNDERSCORE "obscure_ccall_ret_code\n"
+ UNDERSCORE "obscure_ccall_ret_code:\n\t"
+ "addl $0x4, %esp\n\t"
+ "ret"
+ );
+}
+extern void obscure_ccall_ret_code(void);
+
+#if defined(openbsd_HOST_OS)
+static unsigned char *obscure_ccall_ret_code_dyn;
+#endif
+
+#endif
+
+#if defined(x86_64_HOST_ARCH)
+static void GNUC3_ATTRIBUTE(used) obscure_ccall_wrapper(void)
+{
+ __asm__ (
+ ".globl " UNDERSCORE "obscure_ccall_ret_code\n"
+ UNDERSCORE "obscure_ccall_ret_code:\n\t"
+ "addq $0x8, %rsp\n\t"
+ "ret"
+ );
+}
+extern void obscure_ccall_ret_code(void);
+#endif
+
+#if defined(alpha_HOST_ARCH)
+/* To get the definition of PAL_imb: */
+# if defined(linux_HOST_OS)
+# include <asm/pal.h>
+# else
+# include <machine/pal.h>
+# endif
+#endif
+
+#if defined(ia64_HOST_ARCH)
+#include "Storage.h"
+
+/* Layout of a function descriptor */
+typedef struct _IA64FunDesc {
+ StgWord64 ip;
+ StgWord64 gp;
+} IA64FunDesc;
+
+static void *
+stgAllocStable(size_t size_in_bytes, StgStablePtr *stable)
+{
+ StgArrWords* arr;
+ nat data_size_in_words, total_size_in_words;
+
+ /* round up to a whole number of words */
+ data_size_in_words = (size_in_bytes + sizeof(W_) + 1) / sizeof(W_);
+ total_size_in_words = sizeofW(StgArrWords) + data_size_in_words;
+
+ /* allocate and fill it in */
+ arr = (StgArrWords *)allocate(total_size_in_words);
+ SET_ARR_HDR(arr, &stg_ARR_WORDS_info, CCCS, data_size_in_words);
+
+ /* obtain a stable ptr */
+ *stable = getStablePtr((StgPtr)arr);
+
+ /* and return a ptr to the goods inside the array */
+ return(&(arr->payload));
+}
+#endif
+
+#if defined(powerpc_HOST_ARCH) && defined(linux_HOST_OS)
+__asm__("obscure_ccall_ret_code:\n\t"
+ "lwz 1,0(1)\n\t"
+ "lwz 0,4(1)\n\t"
+ "mtlr 0\n\t"
+ "blr");
+extern void obscure_ccall_ret_code(void);
+#endif
+
+#if defined(powerpc_HOST_ARCH) || defined(powerpc64_HOST_ARCH)
+#if !(defined(powerpc_HOST_ARCH) && defined(linux_HOST_OS))
+
+/* !!! !!! WARNING: !!! !!!
+ * This structure is accessed from AdjustorAsm.s
+ * Any changes here have to be mirrored in the offsets there.
+ */
+
+typedef struct AdjustorStub {
+#if defined(powerpc_HOST_ARCH) && defined(darwin_HOST_OS)
+ unsigned lis;
+ unsigned ori;
+ unsigned lwz;
+ unsigned mtctr;
+ unsigned bctr;
+ StgFunPtr code;
+#elif defined(powerpc64_HOST_ARCH) && defined(darwin_HOST_OS)
+ /* powerpc64-darwin: just guessing that it won't use fundescs. */
+ unsigned lis;
+ unsigned ori;
+ unsigned rldimi;
+ unsigned oris;
+ unsigned ori2;
+ unsigned lwz;
+ unsigned mtctr;
+ unsigned bctr;
+ StgFunPtr code;
+#else
+ /* fundesc-based ABIs */
+#define FUNDESCS
+ StgFunPtr code;
+ struct AdjustorStub
+ *toc;
+ void *env;
+#endif
+ StgStablePtr hptr;
+ StgFunPtr wptr;
+ StgInt negative_framesize;
+ StgInt extrawords_plus_one;
+} AdjustorStub;
+
+#endif
+#endif
+
+#if defined(i386_HOST_ARCH) && defined(darwin_HOST_OS)
+
+/* !!! !!! WARNING: !!! !!!
+ * This structure is accessed from AdjustorAsm.s
+ * Any changes here have to be mirrored in the offsets there.
+ */
+
+typedef struct AdjustorStub {
+ unsigned char call[8];
+ StgStablePtr hptr;
+ StgFunPtr wptr;
+ StgInt frame_size;
+ StgInt argument_size;
+} AdjustorStub;
+#endif
+
+#if defined(darwin_HOST_OS) || defined(powerpc_HOST_ARCH) || defined(powerpc64_HOST_ARCH)
+static int totalArgumentSize(char *typeString)
+{
+ int sz = 0;
+ while(*typeString)
+ {
+ char t = *typeString++;
+
+ switch(t)
+ {
+ // on 32-bit platforms, Double and Int64 occupy two words.
+ case 'd':
+ case 'l':
+ if(sizeof(void*) == 4)
+ {
+ sz += 2;
+ break;
+ }
+ // everything else is one word.
+ default:
+ sz += 1;
+ }
+ }
+ return sz;
+}
#endif
void*
-createAdjustor(int cconv, StgStablePtr hptr, StgFunPtr wptr)
+createAdjustor(int cconv, StgStablePtr hptr,
+ StgFunPtr wptr,
+ char *typeString
+#if !defined(powerpc_HOST_ARCH) && !defined(powerpc64_HOST_ARCH) && !defined(x86_64_HOST_ARCH)
+ STG_UNUSED
+#endif
+ )
{
void *adjustor = NULL;
switch (cconv)
{
case 0: /* _stdcall */
-#if defined(i386_TARGET_ARCH)
+#if defined(i386_HOST_ARCH) && !defined(darwin_HOST_OS)
/* Magic constant computed by inspecting the code length of
the following assembly language snippet
(offset and machine code prefixed):
<c>: ff e0 jmp %eax # and jump to it.
# the callee cleans up the stack
*/
- if ((adjustor = stgMallocBytes(14, "createAdjustor")) != NULL) {
+ adjustor = stgMallocBytesRWX(14);
+ {
unsigned char *const adj_code = (unsigned char *)adjustor;
adj_code[0x00] = (unsigned char)0x58; /* popl %eax */
break;
case 1: /* _ccall */
-#if defined(i386_TARGET_ARCH)
+#if defined(i386_HOST_ARCH) && !defined(darwin_HOST_OS)
/* Magic constant computed by inspecting the code length of
the following assembly language snippet
(offset and machine code prefixed):
<00>: 68 ef be ad de pushl $0xdeadbeef # constant is large enough to
# hold a StgStablePtr
<05>: b8 fa ef ff 00 movl $0x00ffeffa, %eax # load up wptr
- <0a>: 68 ef be ad de pushl $__obscure_ccall_ret_code # push the return address
+ <0a>: 68 ef be ad de pushl $obscure_ccall_ret_code # push the return address
<0f>: ff e0 jmp *%eax # jump to wptr
The ccall'ing version is a tad different, passing in the return
via the stable pointer.) (The auto-generated C stub is in on this
game, don't worry :-)
- See the comment next to __obscure_ccall_ret_code why we need to
+ See the comment next to obscure_ccall_ret_code why we need to
perform a tail jump instead of a call, followed by some C stack
fixup.
That's (thankfully) the case here with the restricted set of
return types that we support.
*/
- if ((adjustor = stgMallocBytes(17, "createAdjustor")) != NULL) {
+ adjustor = stgMallocBytesRWX(17);
+ {
unsigned char *const adj_code = (unsigned char *)adjustor;
adj_code[0x00] = (unsigned char)0x68; /* pushl hptr (which is a dword immediate ) */
adj_code[0x05] = (unsigned char)0xb8; /* movl $wptr, %eax */
*((StgFunPtr*)(adj_code + 0x06)) = (StgFunPtr)wptr;
- adj_code[0x0a] = (unsigned char)0x68; /* pushl __obscure_ccall_ret_code */
- *((StgFunPtr*)(adj_code + 0x0b)) = (StgFunPtr)__obscure_ccall_ret_code;
+ adj_code[0x0a] = (unsigned char)0x68; /* pushl obscure_ccall_ret_code */
+ *((StgFunPtr*)(adj_code + 0x0b)) =
+#if !defined(openbsd_HOST_OS)
+ (StgFunPtr)obscure_ccall_ret_code;
+#else
+ (StgFunPtr)obscure_ccall_ret_code_dyn;
+#endif
adj_code[0x0f] = (unsigned char)0xff; /* jmp *%eax */
adj_code[0x10] = (unsigned char)0xe0;
}
-#elif defined(sparc_TARGET_ARCH)
- /* Magic constant computed by inspecting the code length of
- the following assembly language snippet
- (offset and machine code prefixed):
+#elif defined(i386_HOST_ARCH) && defined(darwin_HOST_OS)
+ {
+ /*
+ What's special about Darwin/Mac OS X on i386?
+ It wants the stack to stay 16-byte aligned.
+
+ We offload most of the work to AdjustorAsm.S.
+ */
+ AdjustorStub *adjustorStub = stgMallocBytesRWX(sizeof(AdjustorStub));
+ adjustor = adjustorStub;
- <00>: 13 00 3f fb sethi %hi(0x00ffeffa), %o1 # load up wptr (1 of 2)
- <04>: 11 37 ab 6f sethi %hi(0xdeadbeef), %o0 # load up hptr (1 of 2)
- <08>: 81 c2 63 fa jmp %o1+%lo(0x00ffeffa) # jump to wptr (load 2 of 2)
- <0c>: 90 12 22 ef or %o0, %lo(0xdeadbeef), %o0 # load up hptr (2 of 2)
- # [in delay slot]
- <10>: de ad be ef # Place the value of the StgStablePtr somewhere readable
-
- ccall'ing on a SPARC leaves little to be performed by the caller.
- The callee shifts the window on entry and restores it on exit.
- Input paramters and results are passed via registers. (%o0 in the
- code above contains the input paramter to wptr.) The return address
- is stored in %o7/%i7. Since we don't shift the window in this code,
- the return address is preserved and wptr will return to our caller.
- */
- if ((adjustor = stgMallocBytes(28, "createAdjustor")) != NULL) {
- unsigned char *const adj_code = (unsigned char *)adjustor;
+ extern void adjustorCode(void);
+ int sz = totalArgumentSize(typeString);
+
+ adjustorStub->call[0] = 0xe8;
+ *(long*)&adjustorStub->call[1] = ((char*)&adjustorCode) - ((char*)adjustorStub + 5);
+ adjustorStub->hptr = hptr;
+ adjustorStub->wptr = wptr;
+
+ // The adjustor puts the following things on the stack:
+ // 1.) %ebp link
+ // 2.) padding and (a copy of) the arguments
+ // 3.) a dummy argument
+ // 4.) hptr
+ // 5.) return address (for returning to the adjustor)
+ // All these have to add up to a multiple of 16.
+
+ // first, include everything in frame_size
+ adjustorStub->frame_size = sz * 4 + 16;
+ // align to 16 bytes
+ adjustorStub->frame_size = (adjustorStub->frame_size + 15) & ~15;
+ // only count 2.) and 3.) as part of frame_size
+ adjustorStub->frame_size -= 12;
+ adjustorStub->argument_size = sz;
+ }
+
+#elif defined(x86_64_HOST_ARCH)
+ /*
+ stack at call:
+ argn
+ ...
+ arg7
+ return address
+ %rdi,%rsi,%rdx,%rcx,%r8,%r9 = arg0..arg6
+
+ if there are <6 integer args, then we can just push the
+ StablePtr into %edi and shuffle the other args up.
+
+ If there are >=6 integer args, then we have to flush one arg
+ to the stack, and arrange to adjust the stack ptr on return.
+ The stack will be rearranged to this:
+
+ argn
+ ...
+ arg7
+ return address *** <-- dummy arg in stub fn.
+ arg6
+ obscure_ccall_ret_code
+
+ This unfortunately means that the type of the stub function
+ must have a dummy argument for the original return address
+ pointer inserted just after the 6th integer argument.
- /* sethi %hi(wptr), %o1 */
- *((unsigned long*)(adj_code+0x00)) = (unsigned long)0x13000000;
- *((unsigned long*)(adj_code+0x00)) |= ((unsigned long)wptr) >> 10;
+ Code for the simple case:
- /* sethi %hi(hptr), %o0 */
- *((unsigned long*)(adj_code+0x04)) = (unsigned long)0x11000000;
- *((unsigned long*)(adj_code+0x04)) |= ((unsigned long)hptr) >> 10;
+ 0: 4d 89 c1 mov %r8,%r9
+ 3: 49 89 c8 mov %rcx,%r8
+ 6: 48 89 d1 mov %rdx,%rcx
+ 9: 48 89 f2 mov %rsi,%rdx
+ c: 48 89 fe mov %rdi,%rsi
+ f: 48 8b 3d 0a 00 00 00 mov 10(%rip),%rdi
+ 16: ff 25 0c 00 00 00 jmpq *12(%rip)
+ ...
+ 20: .quad 0 # aligned on 8-byte boundary
+ 28: .quad 0 # aligned on 8-byte boundary
- /* jmp %o1+%lo(wptr) */
- *((unsigned long*)(adj_code+0x08)) = (unsigned long)0x81c26000;
- *((unsigned long*)(adj_code+0x08)) |= ((unsigned long)wptr) & 0x000003ff;
- /* or %o0, %lo(hptr), %o0 */
- *((unsigned long*)(adj_code+0x0c)) = (unsigned long)0x90122000;
- *((unsigned long*)(adj_code+0x0c)) |= ((unsigned long)hptr) & 0x000003ff;
+ And the version for >=6 integer arguments:
- *((StgStablePtr*)(adj_code+0x10)) = (StgStablePtr)hptr;
+ 0: 41 51 push %r9
+ 2: ff 35 20 00 00 00 pushq 32(%rip) # 28 <ccall_adjustor+0x28>
+ 8: 4d 89 c1 mov %r8,%r9
+ b: 49 89 c8 mov %rcx,%r8
+ e: 48 89 d1 mov %rdx,%rcx
+ 11: 48 89 f2 mov %rsi,%rdx
+ 14: 48 89 fe mov %rdi,%rsi
+ 17: 48 8b 3d 12 00 00 00 mov 18(%rip),%rdi # 30 <ccall_adjustor+0x30>
+ 1e: ff 25 14 00 00 00 jmpq *20(%rip) # 38 <ccall_adjustor+0x38>
+ ...
+ 28: .quad 0 # aligned on 8-byte boundary
+ 30: .quad 0 # aligned on 8-byte boundary
+ 38: .quad 0 # aligned on 8-byte boundary
+ */
+
+ /* we assume the small code model (gcc -mcmmodel=small) where
+ * all symbols are <2^32, so hence wptr should fit into 32 bits.
+ */
+ ASSERT(((long)wptr >> 32) == 0);
+
+ {
+ int i = 0;
+ char *c;
+
+ // determine whether we have 6 or more integer arguments,
+ // and therefore need to flush one to the stack.
+ for (c = typeString; *c != '\0'; c++) {
+ if (*c == 'i' || *c == 'l') i++;
+ if (i == 6) break;
+ }
+
+ if (i < 6) {
+ adjustor = stgMallocBytesRWX(0x30);
+
+ *(StgInt32 *)adjustor = 0x49c1894d;
+ *(StgInt32 *)(adjustor+0x4) = 0x8948c889;
+ *(StgInt32 *)(adjustor+0x8) = 0xf28948d1;
+ *(StgInt32 *)(adjustor+0xc) = 0x48fe8948;
+ *(StgInt32 *)(adjustor+0x10) = 0x000a3d8b;
+ *(StgInt32 *)(adjustor+0x14) = 0x25ff0000;
+ *(StgInt32 *)(adjustor+0x18) = 0x0000000c;
+ *(StgInt64 *)(adjustor+0x20) = (StgInt64)hptr;
+ *(StgInt64 *)(adjustor+0x28) = (StgInt64)wptr;
+ }
+ else
+ {
+ adjustor = stgMallocBytesRWX(0x40);
+
+ *(StgInt32 *)adjustor = 0x35ff5141;
+ *(StgInt32 *)(adjustor+0x4) = 0x00000020;
+ *(StgInt32 *)(adjustor+0x8) = 0x49c1894d;
+ *(StgInt32 *)(adjustor+0xc) = 0x8948c889;
+ *(StgInt32 *)(adjustor+0x10) = 0xf28948d1;
+ *(StgInt32 *)(adjustor+0x14) = 0x48fe8948;
+ *(StgInt32 *)(adjustor+0x18) = 0x00123d8b;
+ *(StgInt32 *)(adjustor+0x1c) = 0x25ff0000;
+ *(StgInt32 *)(adjustor+0x20) = 0x00000014;
+
+ *(StgInt64 *)(adjustor+0x28) = (StgInt64)obscure_ccall_ret_code;
+ *(StgInt64 *)(adjustor+0x30) = (StgInt64)hptr;
+ *(StgInt64 *)(adjustor+0x38) = (StgInt64)wptr;
+ }
}
-#elif defined(alpha_TARGET_ARCH)
+#elif defined(sparc_HOST_ARCH)
+ /* Magic constant computed by inspecting the code length of the following
+ assembly language snippet (offset and machine code prefixed):
+
+ <00>: 9C23A008 sub %sp, 8, %sp ! make room for %o4/%o5 in caller's frame
+ <04>: DA23A060 st %o5, [%sp + 96] ! shift registers by 2 positions
+ <08>: D823A05C st %o4, [%sp + 92]
+ <0C>: 9A10000B mov %o3, %o5
+ <10>: 9810000A mov %o2, %o4
+ <14>: 96100009 mov %o1, %o3
+ <18>: 94100008 mov %o0, %o2
+ <1C>: 13000000 sethi %hi(wptr), %o1 ! load up wptr (1 of 2)
+ <20>: 11000000 sethi %hi(hptr), %o0 ! load up hptr (1 of 2)
+ <24>: 81C26000 jmp %o1 + %lo(wptr) ! jump to wptr (load 2 of 2)
+ <28>: 90122000 or %o0, %lo(hptr), %o0 ! load up hptr (2 of 2, delay slot)
+ <2C> 00000000 ! place for getting hptr back easily
+
+ ccall'ing on SPARC is easy, because we are quite lucky to push a
+ multiple of 8 bytes (1 word hptr + 1 word dummy arg) in front of the
+ existing arguments (note that %sp must stay double-word aligned at
+ all times, see ABI spec at http://www.sparc.org/standards/psABI3rd.pdf).
+ To do this, we extend the *caller's* stack frame by 2 words and shift
+ the output registers used for argument passing (%o0 - %o5, we are a *leaf*
+ procedure because of the tail-jump) by 2 positions. This makes room in
+ %o0 and %o1 for the additinal arguments, namely hptr and a dummy (used
+ for destination addr of jump on SPARC, return address on x86, ...). This
+ shouldn't cause any problems for a C-like caller: alloca is implemented
+ similarly, and local variables should be accessed via %fp, not %sp. In a
+ nutshell: This should work! (Famous last words! :-)
+ */
+ adjustor = stgMallocBytesRWX(4*(11+1));
+ {
+ unsigned long *const adj_code = (unsigned long *)adjustor;
+
+ adj_code[ 0] = 0x9C23A008UL; /* sub %sp, 8, %sp */
+ adj_code[ 1] = 0xDA23A060UL; /* st %o5, [%sp + 96] */
+ adj_code[ 2] = 0xD823A05CUL; /* st %o4, [%sp + 92] */
+ adj_code[ 3] = 0x9A10000BUL; /* mov %o3, %o5 */
+ adj_code[ 4] = 0x9810000AUL; /* mov %o2, %o4 */
+ adj_code[ 5] = 0x96100009UL; /* mov %o1, %o3 */
+ adj_code[ 6] = 0x94100008UL; /* mov %o0, %o2 */
+ adj_code[ 7] = 0x13000000UL; /* sethi %hi(wptr), %o1 */
+ adj_code[ 7] |= ((unsigned long)wptr) >> 10;
+ adj_code[ 8] = 0x11000000UL; /* sethi %hi(hptr), %o0 */
+ adj_code[ 8] |= ((unsigned long)hptr) >> 10;
+ adj_code[ 9] = 0x81C26000UL; /* jmp %o1 + %lo(wptr) */
+ adj_code[ 9] |= ((unsigned long)wptr) & 0x000003FFUL;
+ adj_code[10] = 0x90122000UL; /* or %o0, %lo(hptr), %o0 */
+ adj_code[10] |= ((unsigned long)hptr) & 0x000003FFUL;
+
+ adj_code[11] = (unsigned long)hptr;
+
+ /* flush cache */
+ asm("flush %0" : : "r" (adj_code ));
+ asm("flush %0" : : "r" (adj_code + 2));
+ asm("flush %0" : : "r" (adj_code + 4));
+ asm("flush %0" : : "r" (adj_code + 6));
+ asm("flush %0" : : "r" (adj_code + 10));
+
+ /* max. 5 instructions latency, and we need at >= 1 for returning */
+ asm("nop");
+ asm("nop");
+ asm("nop");
+ asm("nop");
+ }
+#elif defined(alpha_HOST_ARCH)
/* Magic constant computed by inspecting the code length of
the following assembly language snippet
(offset and machine code prefixed; note that the machine code
shown is longwords stored in little-endian order):
- <00>: a61b0010 ldq a0, 0x10(pv) # load up hptr
- <04>: a77b0018 ldq pv, 0x18(pv) # load up wptr
- <08>: 6bfbabcd jmp (pv), 0xabcd # jump to wptr (with hint)
- <0c>: 47ff041f nop # padding for alignment
- <10>: [8 bytes for hptr quadword]
- <18>: [8 bytes for wptr quadword]
+ <00>: 46520414 mov a2, a4
+ <04>: 46100412 mov a0, a2
+ <08>: a61b0020 ldq a0, 0x20(pv) # load up hptr
+ <0c>: 46730415 mov a3, a5
+ <10>: a77b0028 ldq pv, 0x28(pv) # load up wptr
+ <14>: 46310413 mov a1, a3
+ <18>: 6bfb---- jmp (pv), <hint> # jump to wptr (with hint)
+ <1c>: 00000000 # padding for alignment
+ <20>: [8 bytes for hptr quadword]
+ <28>: [8 bytes for wptr quadword]
The "computed" jump at <08> above is really a jump to a fixed
location. Accordingly, we place an always-correct hint in the
jump instruction, namely the address offset from <0c> to wptr,
divided by 4, taking the lowest 14 bits.
+ We only support passing 4 or fewer argument words, for the same
+ reason described under sparc_HOST_ARCH above by JRS, 21 Aug 01.
+ On the Alpha the first 6 integer arguments are in a0 through a5,
+ and the rest on the stack. Hence we want to shuffle the original
+ caller's arguments by two.
+
+ On the Alpha the calling convention is so complex and dependent
+ on the callee's signature -- for example, the stack pointer has
+ to be a multiple of 16 -- that it seems impossible to me [ccshan]
+ to handle the general case correctly without changing how the
+ adjustor is called from C. For now, our solution of shuffling
+ registers only and ignoring the stack only works if the original
+ caller passed 4 or fewer argument words.
+
TODO: Depending on how much allocation overhead stgMallocBytes uses for
header information (more precisely, if the overhead is no more than
4 bytes), we should move the first three instructions above down by
4 bytes (getting rid of the nop), hence saving memory. [ccshan]
*/
ASSERT(((StgWord64)wptr & 3) == 0);
- if ((adjustor = stgMallocBytes(32, "createAdjustor")) != NULL) {
+ adjustor = stgMallocBytesRWX(48);
+ {
StgWord64 *const code = (StgWord64 *)adjustor;
- code[0] = 0xa77b0018a61b0010L;
- code[1] = 0x47ff041f6bfb0000L
+ code[0] = 0x4610041246520414L;
+ code[1] = 0x46730415a61b0020L;
+ code[2] = 0x46310413a77b0028L;
+ code[3] = 0x000000006bfb0000L
| (((StgWord32*)(wptr) - (StgWord32*)(code) - 3) & 0x3fff);
- code[2] = (StgWord64)hptr;
- code[3] = (StgWord64)wptr;
+ code[4] = (StgWord64)hptr;
+ code[5] = (StgWord64)wptr;
+
+ /* Ensure that instruction cache is consistent with our new code */
+ __asm__ volatile("call_pal %0" : : "i" (PAL_imb));
+ }
+#elif defined(powerpc_HOST_ARCH) && defined(linux_HOST_OS)
+
+#define OP_LO(op,lo) ((((unsigned)(op)) << 16) | (((unsigned)(lo)) & 0xFFFF))
+#define OP_HI(op,hi) ((((unsigned)(op)) << 16) | (((unsigned)(hi)) >> 16))
+ {
+ /* The PowerPC Linux (32-bit) calling convention is annoyingly complex.
+ We need to calculate all the details of the stack frame layout,
+ taking into account the types of all the arguments, and then
+ generate code on the fly. */
+
+ int src_gpr = 3, dst_gpr = 5;
+ int fpr = 3;
+ int src_offset = 0, dst_offset = 0;
+ int n = strlen(typeString),i;
+ int src_locs[n], dst_locs[n];
+ int frameSize;
+ unsigned *code;
+
+ /* Step 1:
+ Calculate where the arguments should go.
+ src_locs[] will contain the locations of the arguments in the
+ original stack frame passed to the adjustor.
+ dst_locs[] will contain the locations of the arguments after the
+ adjustor runs, on entry to the wrapper proc pointed to by wptr.
+
+ This algorithm is based on the one described on page 3-19 of the
+ System V ABI PowerPC Processor Supplement.
+ */
+ for(i=0;typeString[i];i++)
+ {
+ char t = typeString[i];
+ if((t == 'f' || t == 'd') && fpr <= 8)
+ src_locs[i] = dst_locs[i] = -32-(fpr++);
+ else
+ {
+ if(t == 'l' && src_gpr <= 9)
+ {
+ if((src_gpr & 1) == 0)
+ src_gpr++;
+ src_locs[i] = -src_gpr;
+ src_gpr += 2;
+ }
+ else if(t == 'i' && src_gpr <= 10)
+ {
+ src_locs[i] = -(src_gpr++);
+ }
+ else
+ {
+ if(t == 'l' || t == 'd')
+ {
+ if(src_offset % 8)
+ src_offset += 4;
+ }
+ src_locs[i] = src_offset;
+ src_offset += (t == 'l' || t == 'd') ? 8 : 4;
+ }
+
+ if(t == 'l' && dst_gpr <= 9)
+ {
+ if((dst_gpr & 1) == 0)
+ dst_gpr++;
+ dst_locs[i] = -dst_gpr;
+ dst_gpr += 2;
+ }
+ else if(t == 'i' && dst_gpr <= 10)
+ {
+ dst_locs[i] = -(dst_gpr++);
+ }
+ else
+ {
+ if(t == 'l' || t == 'd')
+ {
+ if(dst_offset % 8)
+ dst_offset += 4;
+ }
+ dst_locs[i] = dst_offset;
+ dst_offset += (t == 'l' || t == 'd') ? 8 : 4;
+ }
+ }
+ }
+
+ frameSize = dst_offset + 8;
+ frameSize = (frameSize+15) & ~0xF;
+
+ /* Step 2:
+ Build the adjustor.
+ */
+ // allocate space for at most 4 insns per parameter
+ // plus 14 more instructions.
+ adjustor = stgMallocBytesRWX(4 * (4*n + 14));
+ code = (unsigned*)adjustor;
+
+ *code++ = 0x48000008; // b *+8
+ // * Put the hptr in a place where freeHaskellFunctionPtr
+ // can get at it.
+ *code++ = (unsigned) hptr;
+
+ // * save the link register
+ *code++ = 0x7c0802a6; // mflr r0;
+ *code++ = 0x90010004; // stw r0, 4(r1);
+ // * and build a new stack frame
+ *code++ = OP_LO(0x9421, -frameSize); // stwu r1, -frameSize(r1)
+
+ // * now generate instructions to copy arguments
+ // from the old stack frame into the new stack frame.
+ for(i=n-1;i>=0;i--)
+ {
+ if(src_locs[i] < -32)
+ ASSERT(dst_locs[i] == src_locs[i]);
+ else if(src_locs[i] < 0)
+ {
+ // source in GPR.
+ ASSERT(typeString[i] != 'f' && typeString[i] != 'd');
+ if(dst_locs[i] < 0)
+ {
+ ASSERT(dst_locs[i] > -32);
+ // dst is in GPR, too.
+
+ if(typeString[i] == 'l')
+ {
+ // mr dst+1, src+1
+ *code++ = 0x7c000378
+ | ((-dst_locs[i]+1) << 16)
+ | ((-src_locs[i]+1) << 11)
+ | ((-src_locs[i]+1) << 21);
+ }
+ // mr dst, src
+ *code++ = 0x7c000378
+ | ((-dst_locs[i]) << 16)
+ | ((-src_locs[i]) << 11)
+ | ((-src_locs[i]) << 21);
+ }
+ else
+ {
+ if(typeString[i] == 'l')
+ {
+ // stw src+1, dst_offset+4(r1)
+ *code++ = 0x90010000
+ | ((-src_locs[i]+1) << 21)
+ | (dst_locs[i] + 4);
+ }
+
+ // stw src, dst_offset(r1)
+ *code++ = 0x90010000
+ | ((-src_locs[i]) << 21)
+ | (dst_locs[i] + 8);
+ }
+ }
+ else
+ {
+ ASSERT(dst_locs[i] >= 0);
+ ASSERT(typeString[i] != 'f' && typeString[i] != 'd');
+
+ if(typeString[i] == 'l')
+ {
+ // lwz r0, src_offset(r1)
+ *code++ = 0x80010000
+ | (src_locs[i] + frameSize + 8 + 4);
+ // stw r0, dst_offset(r1)
+ *code++ = 0x90010000
+ | (dst_locs[i] + 8 + 4);
+ }
+ // lwz r0, src_offset(r1)
+ *code++ = 0x80010000
+ | (src_locs[i] + frameSize + 8);
+ // stw r0, dst_offset(r1)
+ *code++ = 0x90010000
+ | (dst_locs[i] + 8);
+ }
+ }
+
+ // * hptr will be the new first argument.
+ // lis r3, hi(hptr)
+ *code++ = OP_HI(0x3c60, hptr);
+ // ori r3,r3,lo(hptr)
+ *code++ = OP_LO(0x6063, hptr);
+
+ // * we need to return to a piece of code
+ // which will tear down the stack frame.
+ // lis r11,hi(obscure_ccall_ret_code)
+ *code++ = OP_HI(0x3d60, obscure_ccall_ret_code);
+ // ori r11,r11,lo(obscure_ccall_ret_code)
+ *code++ = OP_LO(0x616b, obscure_ccall_ret_code);
+ // mtlr r11
+ *code++ = 0x7d6803a6;
+
+ // * jump to wptr
+ // lis r11,hi(wptr)
+ *code++ = OP_HI(0x3d60, wptr);
+ // ori r11,r11,lo(wptr)
+ *code++ = OP_LO(0x616b, wptr);
+ // mtctr r11
+ *code++ = 0x7d6903a6;
+ // bctr
+ *code++ = 0x4e800420;
+
+ // Flush the Instruction cache:
+ {
+ unsigned *p = adjustor;
+ while(p < code)
+ {
+ __asm__ volatile ("dcbf 0,%0\n\tsync\n\ticbi 0,%0"
+ : : "r" (p));
+ p++;
+ }
+ __asm__ volatile ("sync\n\tisync");
+ }
+ }
+
+#elif defined(powerpc_HOST_ARCH) || defined(powerpc64_HOST_ARCH)
+
+#define OP_LO(op,lo) ((((unsigned)(op)) << 16) | (((unsigned)(lo)) & 0xFFFF))
+#define OP_HI(op,hi) ((((unsigned)(op)) << 16) | (((unsigned)(hi)) >> 16))
+ {
+ /* The following code applies to all PowerPC and PowerPC64 platforms
+ whose stack layout is based on the AIX ABI.
+
+ Besides (obviously) AIX, this includes
+ Mac OS 9 and BeOS/PPC (may they rest in peace),
+ which use the 32-bit AIX ABI
+ powerpc64-linux,
+ which uses the 64-bit AIX ABI
+ and Darwin (Mac OS X),
+ which uses the same stack layout as AIX,
+ but no function descriptors.
+
+ The actual stack-frame shuffling is implemented out-of-line
+ in the function adjustorCode, in AdjustorAsm.S.
+ Here, we set up an AdjustorStub structure, which
+ is a function descriptor (on platforms that have function
+ descriptors) or a short piece of stub code (on Darwin) to call
+ adjustorCode with a pointer to the AdjustorStub struct loaded
+ into register r2.
+
+ One nice thing about this is that there is _no_ code generated at
+ runtime on the platforms that have function descriptors.
+ */
+ AdjustorStub *adjustorStub;
+ int sz = 0, extra_sz, total_sz;
+
+ // from AdjustorAsm.s
+ // not declared as a function so that AIX-style
+ // fundescs can never get in the way.
+ extern void *adjustorCode;
+
+#ifdef FUNDESCS
+ adjustorStub = stgMallocBytes(sizeof(AdjustorStub), "createAdjustor");
+#else
+ adjustorStub = stgMallocBytesRWX(sizeof(AdjustorStub));
+#endif
+ adjustor = adjustorStub;
+
+ adjustorStub->code = (void*) &adjustorCode;
+
+#ifdef FUNDESCS
+ // function descriptors are a cool idea.
+ // We don't need to generate any code at runtime.
+ adjustorStub->toc = adjustorStub;
+#else
+
+ // no function descriptors :-(
+ // We need to do things "by hand".
+#if defined(powerpc_HOST_ARCH)
+ // lis r2, hi(adjustorStub)
+ adjustorStub->lis = OP_HI(0x3c40, adjustorStub);
+ // ori r2, r2, lo(adjustorStub)
+ adjustorStub->ori = OP_LO(0x6042, adjustorStub);
+ // lwz r0, code(r2)
+ adjustorStub->lwz = OP_LO(0x8002, (char*)(&adjustorStub->code)
+ - (char*)adjustorStub);
+ // mtctr r0
+ adjustorStub->mtctr = 0x7c0903a6;
+ // bctr
+ adjustorStub->bctr = 0x4e800420;
+#else
+ barf("adjustor creation not supported on this platform");
+#endif
+
+ // Flush the Instruction cache:
+ {
+ int n = sizeof(AdjustorStub)/sizeof(unsigned);
+ unsigned *p = (unsigned*)adjustor;
+ while(n--)
+ {
+ __asm__ volatile ("dcbf 0,%0\n\tsync\n\ticbi 0,%0"
+ : : "r" (p));
+ p++;
+ }
+ __asm__ volatile ("sync\n\tisync");
+ }
+#endif
+
+ // Calculate the size of the stack frame, in words.
+ sz = totalArgumentSize(typeString);
+
+ // The first eight words of the parameter area
+ // are just "backing store" for the parameters passed in
+ // the GPRs. extra_sz is the number of words beyond those first
+ // 8 words.
+ extra_sz = sz - 8;
+ if(extra_sz < 0)
+ extra_sz = 0;
+
+ // Calculate the total size of the stack frame.
+ total_sz = (6 /* linkage area */
+ + 8 /* minimum parameter area */
+ + 2 /* two extra arguments */
+ + extra_sz)*sizeof(StgWord);
+
+ // align to 16 bytes.
+ // AIX only requires 8 bytes, but who cares?
+ total_sz = (total_sz+15) & ~0xF;
+
+ // Fill in the information that adjustorCode in AdjustorAsm.S
+ // will use to create a new stack frame with the additional args.
+ adjustorStub->hptr = hptr;
+ adjustorStub->wptr = wptr;
+ adjustorStub->negative_framesize = -total_sz;
+ adjustorStub->extrawords_plus_one = extra_sz + 1;
+ }
+
+#elif defined(ia64_HOST_ARCH)
+/*
+ Up to 8 inputs are passed in registers. We flush the last two inputs to
+ the stack, initially into the 16-byte scratch region left by the caller.
+ We then shuffle the others along by 4 (taking 2 registers for ourselves
+ to save return address and previous function state - we need to come back
+ here on the way out to restore the stack, so this is a real function
+ rather than just a trampoline).
+
+ The function descriptor we create contains the gp of the target function
+ so gp is already loaded correctly.
+
+ [MLX] alloc r16=ar.pfs,10,2,0
+ movl r17=wptr
+ [MII] st8.spill [r12]=r38,8 // spill in6 (out4)
+ mov r41=r37 // out7 = in5 (out3)
+ mov r40=r36;; // out6 = in4 (out2)
+ [MII] st8.spill [r12]=r39 // spill in7 (out5)
+ mov.sptk b6=r17,50
+ mov r38=r34;; // out4 = in2 (out0)
+ [MII] mov r39=r35 // out5 = in3 (out1)
+ mov r37=r33 // out3 = in1 (loc1)
+ mov r36=r32 // out2 = in0 (loc0)
+ [MLX] adds r12=-24,r12 // update sp
+ movl r34=hptr;; // out0 = hptr
+ [MIB] mov r33=r16 // loc1 = ar.pfs
+ mov r32=b0 // loc0 = retaddr
+ br.call.sptk.many b0=b6;;
+
+ [MII] adds r12=-16,r12
+ mov b0=r32
+ mov.i ar.pfs=r33
+ [MFB] nop.m 0x0
+ nop.f 0x0
+ br.ret.sptk.many b0;;
+*/
+
+/* These macros distribute a long constant into the two words of an MLX bundle */
+#define BITS(val,start,count) (((val) >> (start)) & ((1 << (count))-1))
+#define MOVL_LOWORD(val) (BITS(val,22,18) << 46)
+#define MOVL_HIWORD(val) (BITS(val,40,23) | (BITS(val,0,7) << 36) | (BITS(val,7,9) << 50) \
+ | (BITS(val,16,5) << 55) | (BITS(val,21,1) << 44) | BITS(val,63,1) << 59)
+
+ {
+ StgStablePtr stable;
+ IA64FunDesc *wdesc = (IA64FunDesc *)wptr;
+ StgWord64 wcode = wdesc->ip;
+ IA64FunDesc *fdesc;
+ StgWord64 *code;
+
+ /* we allocate on the Haskell heap since malloc'd memory isn't executable - argh */
+ adjustor = stgAllocStable(sizeof(IA64FunDesc)+18*8, &stable);
+
+ fdesc = (IA64FunDesc *)adjustor;
+ code = (StgWord64 *)(fdesc + 1);
+ fdesc->ip = (StgWord64)code;
+ fdesc->gp = wdesc->gp;
+
+ code[0] = 0x0000058004288004 | MOVL_LOWORD(wcode);
+ code[1] = 0x6000000220000000 | MOVL_HIWORD(wcode);
+ code[2] = 0x029015d818984001;
+ code[3] = 0x8401200500420094;
+ code[4] = 0x886011d8189c0001;
+ code[5] = 0x84011004c00380c0;
+ code[6] = 0x0250210046013800;
+ code[7] = 0x8401000480420084;
+ code[8] = 0x0000233f19a06005 | MOVL_LOWORD((StgWord64)hptr);
+ code[9] = 0x6000000440000000 | MOVL_HIWORD((StgWord64)hptr);
+ code[10] = 0x0200210020010811;
+ code[11] = 0x1080006800006200;
+ code[12] = 0x0000210018406000;
+ code[13] = 0x00aa021000038005;
+ code[14] = 0x000000010000001d;
+ code[15] = 0x0084000880000200;
+
+ /* save stable pointers in convenient form */
+ code[16] = (StgWord64)hptr;
+ code[17] = (StgWord64)stable;
}
#else
-#error Adjustor creation is not supported on this platform.
+ barf("adjustor creation not supported on this platform");
#endif
break;
return adjustor;
}
-#endif
void
freeHaskellFunctionPtr(void* ptr)
{
-#if defined(i386_TARGET_ARCH)
+#if defined(i386_HOST_ARCH) && !defined(darwin_HOST_OS)
if ( *(unsigned char*)ptr != 0x68 &&
*(unsigned char*)ptr != 0x58 ) {
- fprintf(stderr, "freeHaskellFunctionPtr: not for me, guv! %p\n", ptr);
+ errorBelch("freeHaskellFunctionPtr: not for me, guv! %p\n", ptr);
return;
}
freeStablePtr(*((StgStablePtr*)((unsigned char*)ptr + 0x01)));
} else {
freeStablePtr(*((StgStablePtr*)((unsigned char*)ptr + 0x02)));
- }
-#elif defined(sparc_TARGET_ARCH)
- if ( *(unsigned char*)ptr != 0x13 ) {
- fprintf(stderr, "freeHaskellFunctionPtr: not for me, guv! %p\n", ptr);
+ }
+#elif defined(x86_TARGET_ARCH) && defined(darwin_HOST_OS)
+if ( *(unsigned char*)ptr != 0xe8 ) {
+ errorBelch("freeHaskellFunctionPtr: not for me, guv! %p\n", ptr);
+ return;
+ }
+ freeStablePtr(((AdjustorStub*)ptr)->hptr);
+#elif defined(x86_64_HOST_ARCH)
+ if ( *(StgWord16 *)ptr == 0x894d ) {
+ freeStablePtr(*(StgStablePtr*)(ptr+0x20));
+ } else if ( *(StgWord16 *)ptr == 0x5141 ) {
+ freeStablePtr(*(StgStablePtr*)(ptr+0x30));
+ } else {
+ errorBelch("freeHaskellFunctionPtr: not for me, guv! %p\n", ptr);
+ return;
+ }
+#elif defined(sparc_HOST_ARCH)
+ if ( *(unsigned long*)ptr != 0x9C23A008UL ) {
+ errorBelch("freeHaskellFunctionPtr: not for me, guv! %p\n", ptr);
return;
}
/* Free the stable pointer first..*/
- freeStablePtr(*((StgStablePtr*)((unsigned char*)ptr + 0x10)));
-#elif defined(sparc_TARGET_ARCH)
+ freeStablePtr(*((StgStablePtr*)((unsigned long*)ptr + 11)));
+#elif defined(alpha_HOST_ARCH)
if ( *(StgWord64*)ptr != 0xa77b0018a61b0010L ) {
- fprintf(stderr, "freeHaskellFunctionPtr: not for me, guv! %p\n", ptr);
+ errorBelch("freeHaskellFunctionPtr: not for me, guv! %p\n", ptr);
return;
}
/* Free the stable pointer first..*/
freeStablePtr(*((StgStablePtr*)((unsigned char*)ptr + 0x10)));
+#elif defined(powerpc_HOST_ARCH) && defined(linux_HOST_OS)
+ if ( *(StgWord*)ptr != 0x48000008 ) {
+ errorBelch("freeHaskellFunctionPtr: not for me, guv! %p\n", ptr);
+ return;
+ }
+ freeStablePtr(((StgStablePtr*)ptr)[1]);
+#elif defined(powerpc_HOST_ARCH) || defined(powerpc64_HOST_ARCH)
+ extern void* adjustorCode;
+ if ( ((AdjustorStub*)ptr)->code != (StgFunPtr) &adjustorCode ) {
+ errorBelch("freeHaskellFunctionPtr: not for me, guv! %p\n", ptr);
+ return;
+ }
+ freeStablePtr(((AdjustorStub*)ptr)->hptr);
+#elif defined(ia64_HOST_ARCH)
+ IA64FunDesc *fdesc = (IA64FunDesc *)ptr;
+ StgWord64 *code = (StgWord64 *)(fdesc+1);
+
+ if (fdesc->ip != (StgWord64)code) {
+ errorBelch("freeHaskellFunctionPtr: not for me, guv! %p\n", ptr);
+ return;
+ }
+ freeStablePtr((StgStablePtr)code[16]);
+ freeStablePtr((StgStablePtr)code[17]);
+ return;
#else
ASSERT(0);
#endif
*((unsigned char*)ptr) = '\0';
- free(ptr);
+ stgFree(ptr);
}
+
+/*
+ * Function: initAdjustor()
+ *
+ * Perform initialisation of adjustor thunk layer (if needed.)
+ */
+void
+initAdjustor(void)
+{
+#if defined(i386_HOST_ARCH) && defined(openbsd_HOST_OS)
+ obscure_ccall_ret_code_dyn = stgMallocBytesRWX(4);
+ obscure_ccall_ret_code_dyn[0] = ((unsigned char *)obscure_ccall_ret_code)[0];
+ obscure_ccall_ret_code_dyn[1] = ((unsigned char *)obscure_ccall_ret_code)[1];
+ obscure_ccall_ret_code_dyn[2] = ((unsigned char *)obscure_ccall_ret_code)[2];
+ obscure_ccall_ret_code_dyn[3] = ((unsigned char *)obscure_ccall_ret_code)[3];
+#endif
+}
projects / ghc-hetmet.git / blobdiff