#
# @configure_input@
#
-#################################################################################
+################################################################################
#
# config.mk.in-template
#
# a particular build.
#
#
-#################################################################################
+################################################################################
# The configuration is defined in two steps:
#
# included by boilerplate.mk (see boilerplate.mk for a list).
-#################################################################################
+################################################################################
#
# Project-wide platform variables
#
-#################################################################################
+################################################################################
# A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
# specifier. E.g. sparc-sun-solaris2
# Pin a suffix on executables? If so, what. (cygwin32 only).
exeext=@exeext@
-#################################################################################
+################################################################################
#
# project-wide flags
#
# Set of options applicable to all fptools projects
#
-#################################################################################
+################################################################################
#
# What parts to build: An fptools build tree does not have to be built
# * ghc next
# then it's up to you
-ProjectsToBuild = glafp-utils ghc
+ProjectsToBuild = glafp-utils ghc hslibs
#
# Make a distinction between building and installing
#
-ProjectsToInstall = glafp-utils ghc
+ProjectsToInstall = glafp-utils ghc hslibs
#
# Should the various project tests directories be built?
#
IncludeTestDirsInBuild=NO
-#
-# Name variables for the main project
-#
-Project = Ghc
-ProjectName = $($(Project)ProjectName)
-ProjectNameShort = $($(Project)ProjectNameShort)
-ProjectVersion = $($(Project)ProjectVersion)
-ProjectVersionInt = $($(Project)ProjectVersionInt)
-ProjectPatchLevel = $($(Project)ProjectPatchLevel)
-
-#################################################################################
+################################################################################
#
# GHC project
#
# Set of (configurable) options needed by the ghc tree
# plus their default options (if any).
#
-#################################################################################
-
-#
-# Name variables for ghc:
-#
-# *ProjectVersion is treated as a *string*
-# *ProjectVersionInt is treated as an *integer* (for cpp defines)
-
-GhcProjectName = The Glorious Glasgow Haskell Compilation System
-GhcProjectNameShort = ghc
-GhcProjectVersion = 3.02
-GhcProjectVersionInt = 302
-GhcProjectPatchLevel = 0
+################################################################################
#---------------------------------------------------------------
#
# Variables that control how the compiler itself is built
+#
+#---------------------------------------------------------------
# Specify the Haskell compiler to be used to compile the compiler itself
#
# HC_ROJEMO_NHC
# HC_UNSPECIFIED
-WithGhcHc = ghc-2.10
+WithGhcHc = @WithHc@
-# Unused, we think
-# WithGhcHcType=HC_GLASGOW_GHC
+# Variable which is set to the version number of the $(WithGhcHc) we're using.
+# Not currently used, but might come in handy sometime soon.
+#WithGhcHcVersion = $(shell echo `if ( $(WithGhcHc) --version 2>/dev/null >/dev/null ) then $(WithGhcHc) --version 2>&1 | @SedCmd@ -e 's/^.*version [^0-9]*\([.0-9]*\).*/\1/;s/\.//'; else echo unknown; fi; ` )
# Extra ways in which to build the compiler (for example, you might want to
# build a profiled compiler so you can see where it spends its time)
# Extra option flags to pass to the compiler that compiles the compiler
# (Ones that are essential are wired into ghc/compiler/Makefile)
# Typical ones:
-# -H25m allocate a bigger heap (default is 6m)
+# -H25m allocate a bigger heap (might speed up compilation)
#
# -O compile an optimised compiler
-# NB! If you add -O you'll almost certainly need to increase
-# the amount of heap space too (to 15m or more)
#
# -DDEBUG include consistency/assertion checks in the compiled compiler
#
# -dcore-lint check the types after every pass of the compiler;
# a pretty strong internal check
-GhcHcOpts=
+GhcHcOpts=-O
# GhcWithHscBuiltViaC - build GHC compiler proper (\`hsc') from .hc files?
-GhcWithHscBuiltViaC=NO
-
-# Build hsc with -O and turn optimising flag on when compiling
-# the intermediate C file
-GhcUseGccForOptAsm=YES
-
-# Compile intermediate C file with debugging options set.
-GhcUseGccForDebuggingAsm=YES
+GhcWithHscBuiltViaC=@BootingFromHc@
# Build a registerised version of hsc and runtime
-# (you'd be desperate or silly not to).
+# (unregisterised used for Hugs at the moment)
GhcWithRegisterised=YES
# Build a compiler with a native code generator backend
# Building various ways?
# (right now, empty if not).
BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
-BuildingConcurrent=$(subst mc,YES,$(filter mc,$(WAYS)))
-BuildingProfiling=$(subst p,YES,$(filter p,$(WAYS)))
BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
-BuildingProfilingConcurrent=$(subst mr,YES,$(filter mr,$(WAYS)))
-#---------------------------------------------------------------
+# Include compiler support for letting the compiler (optionally) report
+# your compilation to a central server for generation of fun stats.
#
-# Variables that control how the prelude libraries and runtime system are built
+GhcReportCompiles=NO
+
+#------------------------------------------------------------------------------
+# Options for GHC's Prelude
# What extra ways to build the libraries in
# In addition to the normal sequential way, the default is to also build
# profiled prelude libraries.
+# When booting from .hc files, turn this off.
+ifeq "$(GhcWithHscBuiltViaC)" "YES"
+GhcLibWays=
+else
GhcLibWays=p
+endif
# Option flags to pass to GHC when it's compiling prelude modules
# Typically these are things like -O or -dcore-lint
# -O is pretty desirable, otherwise no inlining of prelude
# things (incl "+") happens when compiling with this compiler
-#
-# Splitting profiled code produces awfully large archives under ELF, so
-# we turn it off here.
-#
-# ToDo: track down the source of this.
-#
-ifeq "$(strip $(way))" "p"
-GhcLibHcOpts= -O
-else
-ifeq "$(strip $(way))" "mr"
-GhcLibHcOpts= -O
+GhcLibHcOpts=-O
+
+# Win32 only: Enable the RTS and libraries to be built as DLLs
+# Don't split object files for libs if we're building DLLs
+EnableWin32DLLs=@EnableWin32DLLs@
+ifeq "($EnableWin32DLLs)" "YES"
+SplitObjs=NO
else
-GhcLibHcOpts= -O -split-objs -odir $*
-endif
+SplitObjs=YES
endif
-# Build the Haskell Readline bindings?
+
+# Strip local symbols from libraries? This can make the libraries smaller,
+# but makes debugging somewhat more difficult. Doesn't work with all ld's.
#
-GhcLibsWithReadline=NO
+StripLibraries=NO
+
+# ----------------------------------------------------------------------------
+# Options for GHC's RTS
+
+# This is a good way to set things like -optc-g and -optc-DDEBUG for the RTS.
+# GhcRtsHcOpts is used when compiling .hc files and .c files.
+# GhcRtsCcOpts is used when compiling .c files only.
+
+# For a debugging RTS:
+# GhcRtsHcOpts = -optc-DDEBUG
+# GhcRtsCcOpts = -optc-g
+
+# For an optimised RTS:
+GhcRtsHcOpts=-O2
+GhcRtsCcOpts=-O2 -optc-fomit-frame-pointer
+
+################################################################################
#
-# Include path to readline.h
-# (no path == in standard include path)
+# hslibs project
#
-ReadlineIncludePath=
+################################################################################
+
+# Build HsLibs for which compiler?
+
+# If $(HsLibsFor) == hugs or ghc, we assume we're building for the
+# compiler/interpreter in the same source tree.
+
+# HsLibsFor = ghc | hugs | nhc | hbc
+HsLibsFor = ghc
+
+# hslibs for GHC also uses the following variables (defined above):
+# GhcLibWays, GhcLibHcOpts, GhcLibToolsHcOpts, EnableWin32DLLs, StripLibraries
-# Build the socket libraries? (ToDo: is this used?)
+# Haskell compiler options for tools in hslibs
+GhcLibToolsHcOpts=-O
+
+# Build the Haskell Readline bindings?
#
-GhcLibsWithSockets=YES
+GhcLibsWithReadline=@HaveReadlineHeaders@
-# what to include in a binary distribution
+# Libraries needed for linking with readline
+LibsReadline=@LibsReadline@
-GhcMainDir = ghc
-GhcBinDistDirs = ghc
-GhcBinDistDocs = docs ghc/docs/users_guide ghc/docs/libraries
-GhcBinDistPrlScripts = ghc-$(GhcProjectVersion) stat2resid hstags mkdependHS
-GhcBinDistLibPrlScripts = hscpp
-GhcBinDistBins = hp2ps
+# Include path to readline.h
+# (no path == in standard include path)
+#
+ReadlineIncludePath=
-#################################################################################
+################################################################################
#
# happy project
#
# Happy specific options
#
-#################################################################################
-
-#
-# Name variables for happy:
-#
-HappyProjectName = Happy
-HappyProjectNameShort = happy
-HappyProjectVersion = 1.5
-HappyProjectVersionInt = 15
-HappyProjectPatchLevel = 0
+################################################################################
# The compiler you'd like to use to compile Happy
-WithHappyHc = $(WithGhcHc)
+WithHappyHc = @WithHc@
# HappyHcOpts gives the flags to pass to the Haskell compiler used
# to compile the Happy sources with.
#
-HappyHcOpts =
+HappyHcOpts = -O
-# what to include in a binary distribution
-
-HappyMainDir = happy
-HappyBinDistDirs = happy
-HappyBinDistDocs = happy/doc
-HappyBinDistShScripts = happy
-
-#################################################################################
+################################################################################
#
# haggis project
#
# Haggis specific options
#
-#################################################################################
+################################################################################
-#################################################################################
+################################################################################
#
# green-card project
#
# Green-card specific options
#
-#################################################################################
+################################################################################
-
-#################################################################################
+################################################################################
#
# nofib project
#
# nofib specific options
#
-#################################################################################
+################################################################################
+WithNofibHc = $(GHC_INPLACE)
# NoFibSubDirs controls which set of tests should be run
# You can run one or more of
# real
# parallel
# PRIVATE
-# GHC_ONLY
# PENDING
# UNUSED
-NoFibSubDirs = imaginary spectral real GHC_ONLY PRIVATE
+NoFibSubDirs = imaginary spectral real
# The different ways to build nofib. Default is just to mirror
# what is done for the ghc prelude libraries.
#
-NoFibWays=$(GhcLibWays)
+NoFibWays = $(GhcLibWays)
# Haskell compiler options for nofib
-NoFibHcOpts=
+NoFibHcOpts = -O
# ==============================================================================
#
#
# ==============================================================================
-#################################################################################
+################################################################################
#
# Paths (see paths.mk)
#
-#################################################################################
+################################################################################
+
+# Directory used by GHC (and possibly other tools) for storing
+# temporary files. If your /tmp isn't big enough, either override
+# this in build.mk or set your environment variable "TMPDIR" to point
+# to somewhere with more space. (TMPDIR=. is a good choice).
TMPDIR = /tmp
endif
-#################################################################################
+################################################################################
#
# Utilities programs: flags
#
-#################################################################################
+################################################################################
# If you want to give any standard flags to pretty much any utility
# (see utils.mk for a complete list), by adding a line here
# SRC_HC_OPTS += -O
-#################################################################################
+################################################################################
#
# Utilities programs: where to find them
#
-#################################################################################
+################################################################################
#-----------------------------------------------------------------------------
# FPtools Utility locations
#-----------------------------------------------------------------------------
-# Haskell compiler and mkdependHS
+# Haskell compilers and mkdependHS
-HC = $(FPTOOLS_TOP)/ghc/driver/ghc
+# $(GHC), $(HBC) and $(NHC) point to installed versions of the relevant
+# compilers, if available.
+#
+# $(HC) is a generic Haskell 98 compiler, set to $(GHC) by default.
+# $(MKDEPENDHS) is the Haskell dependency generator (ghc -M).
+
+GHC = @GHC@
+HBC = @HBC@
+NHC = @NHC@
+
+HC = @WithHc@
MKDEPENDHS = $(HC)
+# Sometimes we want to invoke ghc from the build tree in different
+# projects (eg. it's handy to have a nofib & a ghc build in the same
+# tree). We can refer to "this ghc" as $(GHC_INPLACE):
+
+GHC_INPLACE = $(FPTOOLS_TOP)/ghc/driver/ghc-inplace
+
#-----------------------------------------------------------------------------
# C compiler
#
#
HaveGcc = @HaveGcc@
UseGcc = YES
-WhatGccIsCalled = gcc
+WhatGccIsCalled = @WhatGccIsCalled@
ifeq "$(strip $(HaveGcc))" "YES"
ifneq "$(strip $(UseGcc))" "YES"
CC = cc
endif
#-----------------------------------------------------------------------------
+# GMP Library (version 2.0.x or above)
+#
+HaveLibGmp = @HaveLibGmp@
+LibGmp = @LibGmp@
+
+#-----------------------------------------------------------------------------
# Flex
FLEX = @LEX@
-FLEX_LIB = @LEXLIB@
+# Don't bother with -lfl, we define our own yywrap()s anyway.
+FLEX_LIB =
+#WAS:FLEX_LIB = @LEXLIB@
#-----------------------------------------------------------------------------
# Other standard (ha!) Unix utilities
CONTEXT_DIFF = @ContextDiffCmd@
CP = cp
-CPP = @RAWCPP@
+CPP = @CPP@
CTAGS = $(ETAGS)
-RAWCPP = @RAWCPP@
-GNUCPP = @GNUCPP@
+RAWCPP = $(CPP) -undef -traditional
+FIND = @FindCmd@
INSTALL = @INSTALL@
#
# Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
# override whatever setting you have in your environment while executing.
# By default, REAL_SHELL is set equal SHELL, which is not really a smart move
-# as it SHELL that will show up the bogosity in the first place, but setting
+# as it is SHELL that will show up the bogosity in the first place, but setting
# it to anything else isn't really portable.
#
# ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
SIZE = size
STRIP = strip
TAR = @TarCmd@
+ZIP = zip
#
# Under cygwin32, we have to deal with .exe suffixes
#-----------------------------------------------------------------------------
# SGML stuff (currently not configured - we assume you have it)
-SGML2LATEX = sgml2latex
-SGML2HTML = sgml2html
-SGML2INFO = sgml2info
-SGML2TXT = sgml2txt
+SGML2DVI = db2dvi
+SGML2HTML = db2html
+SGML2PS = db2ps
+SGML2RTF = db2rtf
+
+SGMLSTYLESHEET = $(FPTOOLS_TOP_ABS)/docs/fptools-both.dsl
+
+SRC_SGML2DVI_OPTS = -d $(SGMLSTYLESHEET)
+SRC_SGML2HTML_OPTS = -d $(SGMLSTYLESHEET)
+SRC_SGML2PS_OPTS = -d $(SGMLSTYLESHEET)
+SRC_SGML2RTF_OPTS = -d $(SGMLSTYLESHEET)
#-----------------------------------------------------------------------------
# FPtools support software
ETAGS = $(ETAGS_PREFIX)etags
VERBATIM = $(VERBATIM_PREFIX)verbatim
SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb
-SGML2LATEX = sgml2latex
RUNTEST = $(RUNTEST_PREFIX)runstdtest
HAPPY = @HappyCmd@
HAPPY_VERSION = @HappyVersion@
LX = @LxCmd@
GREENCARD = $(FPTOOLS_TOP)/green-card/src/green-card
+BLD_DLL = dllwrap
+
#
# Stuff from fptools/literate
#
#
# The ways currently defined.
#
-ALL_WAYS=p t u mc mr mt mp mg 1s 2s du a b c d e f g h i j k l m n o A B
+ALL_WAYS=p t u s mp mg a b c d e f g h i j k l m n o A B
+USER_WAYS=a b c d e f g h i j k l m n o A B
#
-# The following ways currently have treated specially, p u t mc mt my mp mg 1s 2d du,
+# The following ways currently have treated specially, p u t mg,
# as the driver script treats these guys specially and needs to carefully be told
# about the options for these. Hence, we hide the required command line options
# for these in the ghc/driver, as this is the only place they are needed.
#
# If you want to add to these default options, fill in the variables below:
-#
+
+# Way 'p':
WAY_p_NAME=profiling
WAY_p_HC_OPTS= -prof
-# Way t:
+# Way 't':
WAY_t_NAME=ticky-ticky profiling
WAY_t_HC_OPTS= -ticky
# Way `u':
WAY_u_NAME=unregisterized (using portable C only)
-WAY_u_HC_OPTS=
+WAY_u_HC_OPTS=-unreg
-# Way `mc': concurrent
-WAY_mc_NAME=concurrent
-WAY_mc_HC_OPTS=-concurrent
-
-# Way `mr':
-WAY_mr_NAME=profiled concurrent
-WAY_mr_HC_OPTS=-prof -concurrent
-
-# Way `mt':
-WAY_mt_NAME=ticky-ticky concurrent
-WAY_mt_HC_OPTS=-ticky -concurrent
+# Way `s':
+WAY_s_NAME=threads (for SMP)
+WAY_s_HC_OPTS=-smp
# Way `mp':
WAY_mp_NAME=parallel
WAY_mp_HC_OPTS=-parallel
-#
# Way `mg':
-#
WAY_mg_NAME=GranSim
WAY_mg_HC_OPTS=-gransim
-#
-# Ways for different garbage collectors
-#
-WAY_2s_NAME=2-space GC
-WAY_2s_HC_OPTS=-2s
-
-WAY_1s_NAME=1-space GC
-WAY_1s_HC_OPTS=-1s
-
-WAY_du_NAME=dual-mode GC
-WAY_du_HC_OPTS=-du
+# Way `dll':
+WAY_dll_NAME=Win32 DLLs
+WAY_dll_HC_OPTS=
#
# Add user-way configurations here:
projects / ghc-hetmet.git / blobdiff