#
# This is one of only two files that configure generates (the other is config.h)
#
-# There is a section below for each project within the fptools suite
+
+ifneq "$(findstring 3.7, $(MAKE_VERSION))" ""
+ifeq "$(findstring 3.79.1, $(MAKE_VERSION))" ""
+$(error GNU make version 3.79.1 or later is required.)
+endif
+endif
+
+################################################################################
#
-# PLUS
+# GHC Version
#
-# a section corresponding to each of the main .mk files
-# included by boilerplate.mk (see boilerplate.mk for a list).
+# ProjectVersion is treated as a *string*
+# ProjectVersionInt is treated as an *integer* (for cpp defines)
+
+# Versioning scheme: A.B.C
+# A: major version, decimal, any number of digits
+# B: minor version, decimal, any number of digits
+# C: patchlevel, one digit, omitted if zero.
+#
+# ProjectVersionInt does *not* contain the patchlevel (rationale: this
+# figure is used for conditional compilations, and library interfaces
+# etc. are not supposed to change between patchlevels).
+#
+# The ProjectVersionInt is included in interface files, and GHC
+# checks that it's reading interface generated by the same ProjectVersion
+# as itself. It does this even though interface file syntax may not
+# change between versions. Rationale: calling conventions or other
+# random .o-file stuff might change even if the .hi syntax doesn't
+
+ProjectName = @ProjectName@
+ProjectTags =
+ProjectVersion = @ProjectVersion@$(ProjectTags)
+ProjectVersionInt = @ProjectVersionInt@
+ProjectPatchLevel = @ProjectPatchLevel@
################################################################################
#
-# Project-wide platform variables
+# Platform variables
#
################################################################################
@TargetVendor_CPP@_TARGET_VENDOR = 1
@BuildVendor_CPP@_BUILD_VENDOR = 1
+################################################################################
+#
+# Global configuration options
+#
+################################################################################
+
# Leading underscores on symbol names in object files
# Valid options: YES/NO
#
# Pin a suffix on executables? If so, what (Windows only).
exeext=@exeext@
+soext=@soext@
# Windows=YES if on a Windows platform
ifneq "$(findstring $(HostOS_CPP), mingw32 cygwin32)" ""
Windows=NO
endif
-################################################################################
-#
-# project-wide flags
-#
-# Set of options applicable to all fptools projects
-#
-################################################################################
-
# BootingFromHc - build GHC and the libraries from .hc files?
BootingFromHc = @BootingFromHc@
# rather than registerised code, i.e., disable the mangler?
BootingFromUnregisterisedHc = @BootingFromUnregisterisedHc@
-# Build Order: we build Happy, Haddock and Alex before GHC if they are
-# in this source tree, just in case our GHC build depends on these
-# local builds rather than installed versions of the tools.
-#
-# Build the libs first if we're bootstrapping from .hc files.
-ifeq "$(BootingFromHc)" "YES"
-AllProjects = glafp-utils happy alex haddock libraries hslibs ghc greencard hdirect hood nofib docs
-else
-AllProjects = glafp-utils happy alex haddock ghc libraries hslibs greencard hdirect hood nofib docs
-endif
-
-#
-# (OPTIONAL) set ProjectsToBuild to a list of projects to be built. If this
-# list is empty, then all projects present in the source tree will be built.
-#
-ProjectsToBuild =
-
-#
-# set ProjectsDontInstall to a list of projects which are normally built but
-# not installed.
-#
-ProjectsDontInstall = glafp-utils nofib
-
-#
-# Should the various project tests directories be built?
-#
-IncludeTestDirsInBuild=NO
-
-#
-# Should the various project example directories be built?
-#
-IncludeExampleDirsInBuild=NO
-
#
# Which ways should DocBook XML documents be built?
# options are: dvi ps pdf html chm HxS
#
XMLDocWays=
-################################################################################
-#
-# GHC project
-#
-# Set of (configurable) options needed by the ghc tree
-# plus their default options (if any).
-#
-################################################################################
+# Mac OS X deployment target (to cross-compile for older OS versions)
+#
+MACOSX_DEPLOYMENT_VERSION = @MACOSX_DEPLOYMENT_VERSION@
+MACOSX_DEPLOYMENT_SDK = @MACOSX_DEPLOYMENT_SDK@
+
+ifneq "$(MACOSX_DEPLOYMENT_VERSION)" ""
+MACOSX_DEPLOYMENT_CC_OPTS = -mmacosx-version-min=$(MACOSX_DEPLOYMENT_VERSION) \
+ -isysroot $(MACOSX_DEPLOYMENT_SDK) \
+ --no-builtin-fprintf
+MACOSX_DEPLOYMENT_LD_OPTS = -mmacosx-version-min=$(MACOSX_DEPLOYMENT_VERSION) \
+ -Wl,-syslibroot,$(MACOSX_DEPLOYMENT_SDK)
+# We don't extend SRC_CC_OPTS and friends here directly, as (a) they may get
+# overwritten in build.mk and (b) we must not use the deployment options in
+# stage 1 or we get a linker error if the bootstrap compiler is for a more
+# recent OS version.
+#
+# We need --no-builtin-fprintf, as the use of the builtin function optimisation
+# for fprintf together with #include "PosixSource" in the RTS leads to the
+# use of fwrite$UNIX2003 (with GCC 4.0.1 on Mac OS X 10.5.2).
+endif
-#---------------------------------------------------------------
+################################################################################
#
# Variables that control how the compiler itself is built
#
-#---------------------------------------------------------------
+################################################################################
# The compiler used to build GHC is $(GHC). To change the actual compiler
# used, re-configure with --with-ghc=<path-to-ghc>.
GhcCompilerWays=
# Extra option flags to pass to the compiler that compiles the compiler
-# (Ones that are essential are wired into ghc/compiler/Makefile)
+# (Ones that are essential are wired into compiler/Makefile)
# Typical options to use here:
#
# -DDEBUG include debugging code and assertions (will make the
# These are placed later on the command line, and may therefore
# override options from $(GhcHcOpts).
GhcStage1HcOpts=
-GhcStage2HcOpts=
-GhcStage3HcOpts=
+GhcStage2HcOpts=-O2
+GhcStage3HcOpts=-O2
+
+GhcProfiled=NO
+GhcDebugged=NO
# Build a compiler that will build *unregisterised* libraries and
# binaries by default. Unregisterised code is supposed to compile and
# the compiler you build with is generating registerised binaries), but
# the stage2 compiler will be an unregisterised binary.
#
+ifneq "$(findstring $(HostArch_CPP), alpha hppa)" ""
+GhcUnregisterised=YES
+else
GhcUnregisterised=NO
+endif
# Build a compiler with a native code generator backend
# (as well as a C backend)
# Target platforms supported:
# i386, powerpc
# sparc has bitrotted
-ifneq "$(findstring $(HostArch_CPP), i386 x86_64 powerpc)" ""
-GhcWithNativeCodeGen=YES
-else
-GhcWithNativeCodeGen=NO
-endif
+# AIX is not supported
+ArchSupportsNCG=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc)))
+OsSupportsNCG=$(strip $(patsubst $(HostOS_CPP), YES, $(patsubst aix,,$(HostOS_CPP))))
+
+# lazy test, because $(GhcUnregisterised) might be set in build.mk later.
+GhcWithNativeCodeGen=$(strip\
+ $(if $(filter YESYESNO,\
+ $(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)),YES,NO))
# Include support for generating Java
GhcWithJavaGen=NO
HaveLibDL = @HaveLibDL@
+# ArchSupportsSMP should be set iff there is support for that arch in
+# includes/SMP.h
+ArchSupportsSMP=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 sparc powerpc)))
+
+# lazy test, because $(GhcUnregisterised) might be set in build.mk later.
+GhcWithSMP=$(strip $(if $(filter YESNO, $(ArchSupportsSMP)$(GhcUnregisterised)),YES,NO))
+
# Whether to include GHCi in the compiler. Depends on whether the RTS linker
# has support for this OS/ARCH combination.
OsSupportsGHCi=$(strip $(patsubst $(HostOS_CPP), YES, $(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin)))
-ArchSupportsGHCi=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc powerpc64 sparc sparc64)))
+ArchSupportsGHCi=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc sparc64)))
ifeq "$(OsSupportsGHCi)$(ArchSupportsGHCi)" "YESYES"
GhcWithInterpreter=YES
GhcWithInterpreter=NO
endif
+# GhcEnableTablesNextToCode tells us whether the target architecture
+# supports placing info tables directly before the entry code
+# (see TABLES_NEXT_TO_CODE in the RTS). Whether we actually compile for
+# TABLES_NEXT_TO_CODE depends on whether we're building unregisterised
+# code or not, which may be decided by options to the compiler later.
+ifneq "$(findstring $(TargetArch_CPP)X, ia64X powerpc64X)" ""
+GhcEnableTablesNextToCode=NO
+else
+GhcEnableTablesNextToCode=YES
+endif
+
+# On Windows we normally want to make a relocatable bindist, to we
+# ignore flags like libdir
+ifeq "$(Windows)" "YES"
+RelocatableBuild = YES
+else
+RelocatableBuild = NO
+endif
+
+# When building bindists we set this to yes so that the binaries are as
+# portable as possible.
+BeConservative = NO
+
#
# Building various ways?
# (right now, empty if not).
BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
+# Interface file version (hi-boot files only)
+#
+# A GHC built with HscIfaceFileVersion=n will look for
+# M.hi-boot-n, and only then for
+# M.hi-boot.
+# (It'll be happy with the latter if the former doesn't exist.)
+#
+#
+# This variable is used ONLY for hi-boot files. Its only purpose is
+# to allow you to have a single directory with multiple .hi-boot files
+# for the same module, each corresponding to a different version of
+# GHC.
+#
+# HscIfaceFileVersion is propagated to hsc via
+# compiler/main/Config.hs, which is automatically generated by
+# compiler/Makefile.
+
+HscIfaceFileVersion=6
+
+MakefileDeps=YES
+
#------------------------------------------------------------------------------
# Options for Libraries
+# Which directory (in libraries/) contains the integer library?
+INTEGER_LIBRARY=integer-gmp
+
# What extra ways to build the libraries in
# In addition to the normal sequential way, the default is to also build
# profiled prelude libraries.
# thr_p : threaded profiled
# debug : debugging (compile with -g for the C compiler, and -DDEBUG)
# debug_p : debugging profiled
-# debug_u : debugging unregisterised
# thr_debug : debugging threaded
# thr_debug_p : debugging threaded profiled
+# t : ticky-ticky profiling
+# debug_t : debugging ticky-ticky profiling
#
-ifeq "$(BootingFromHc)" "YES"
GhcRTSWays=
-else
-GhcRTSWays=thr thr_p debug thr_debug
+
+# Usually want the debug version
+ifeq "$(BootingFromHc)" "NO"
+GhcRTSWays += debug
endif
+# Want the threaded versions unless we're unregisterised
+# Defer the check until later by using $(if..), because GhcUnregisterised might
+# be set in build.mk, which hasn't been read yet.
+GhcRTSWays += $(if $(findstring NO, $(GhcUnregisterised)),thr thr_p thr_debug,)
+
+# We can only build GHCi threaded if we have a threaded RTS:
+GhcThreaded = $(if $(findstring thr,$(GhcRTSWays)),YES,NO)
+
# Option flags to pass to GHC when it's compiling modules in
# fptools/libraries. Typically these are things like -O or
# -dcore-lint or -H32m. The ones that are *essential* are wired into
# the build system.
#
-# -O is pretty desirable, otherwise no inlining of prelude
+# -O(2) is pretty desirable, otherwise no inlining of prelude
# things (incl "+") happens when compiling with this compiler
#
# -fgenerics switches on generation of support code for
# but we switch it on for the libraries so that we generate
# the code in case someone importing wants it
-GhcLibHcOpts=-O -Rghc-timing -fgenerics
+GhcLibHcOpts=-O2 -Rghc-timing -fgenerics
# Win32 only: Enable the RTS and libraries to be built as DLLs
DLLized=@EnableWin32DLLs@
#
StripLibraries=NO
+# These are the URL patterns that Haddock uses to generate the "Source
+# File" links on each page.
+PackageSourceURL = http://darcs.haskell.org/packages/$(PACKAGE)/%{FILE}
# ----------------------------------------------------------------------------
# Object-file splitting
# Don't use -split-objs in in GhcLibHcOpts, because the build
# system needs to do other special magic if you are
# doing object-file splitting
-ifneq "$(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc)" ""
-SplitObjs=YES
-else
-SplitObjs=NO
-endif
-# Don't split object files for libs if we're building DLLs, or booting from
-# .hc files.
-ifeq "$(DLLized)" "YES"
-SplitObjs=NO
-endif
-ifeq "$(BootingFromHc)" "YES"
-SplitObjs=NO
-endif
-ifeq "$(GhcUnregisterised)" "YES"
-SplitObjs=NO
-endif
-ifeq "$(TargetArch_CPP)" "ia64"
-SplitObjs=NO
-endif
-
-# ----------------------------------------------------------------------------
-# Options for GHC's RTS
-
-# For an optimised RTS (you probably don't want to change these; we build
-# a debugging RTS by default now. Use -debug to get it).
-GhcRtsHcOpts=-O2
-GhcRtsCcOpts=-fomit-frame-pointer
-
-# Include the front panel code? Needs GTK+.
-GhcRtsWithFrontPanel = NO
-
-################################################################################
-#
-# libraries project
-#
-################################################################################
-
-# Build the Haskell Readline bindings?
-#
-GhcLibsWithReadline=@GhcLibsWithReadline@
-
-# Libraries needed for linking with readline
-LibsReadline=@LibsReadline@
-
-# Include path to readline.h
-# (no path == in standard include path)
-#
-ReadlineIncludePath=
+# lazy test, so that $(GhcUnregisterised) can be set in build.mk
+SplitObjs=$(strip $(if $(filter $(TargetArch_CPP),i386 x86_64 powerpc sparc),\
+ $(if $(filter YES,$(BootingFromHC)),\
+ NO,\
+ $(if $(filter NO,$(GhcUnregisterised)),\
+ YES,\
+ NO)),\
+ NO))
# Math library
LIBM=@LIBM@
#
GhcLibsWithUnix=@GhcLibsWithUnix@
-################################################################################
-#
-# happy project
-#
-# Happy specific options
-#
-################################################################################
-
-# The compiler you'd like to use to compile Happy
-WithHappyHc = @WithHc@
+# ----------------------------------------------------------------------------
+# Options for GHC's RTS
-# HappyHcOpts gives the flags to pass to the Haskell compiler used
-# to compile the Happy sources with.
-#
-HappyHcOpts = -O
+# For an optimised RTS (you probably don't want to change these; we build
+# a debugging RTS by default now. Use -debug to get it).
+GhcRtsHcOpts=-optc-O2
+GhcRtsCcOpts=-fomit-frame-pointer
-################################################################################
-#
-# haggis project
-#
-# Haggis specific options
-#
-################################################################################
+# Include the front panel code? Needs GTK+.
+GhcRtsWithFrontPanel = NO
-################################################################################
-#
-# greencard project
-#
-# GreenCard specific options
-#
-################################################################################
+# Include support for CPU performance counters via the PAPI library in the RTS?
+# (PAPI: http://icl.cs.utk.edu/papi/)
+GhcRtsWithPapi = NO
+HavePapi = @HavePapi@
################################################################################
#
-# nofib project
+# nofib
#
# nofib specific options
#
# Number of times to run each program
NoFibRuns = 5
-# ==============================================================================
-#
-# END OF PROJECT-SPECIFIC STUFF
-#
-# Now come the generic configuration options
-#
-# ==============================================================================
-
################################################################################
#
# Paths (see paths.mk)
DEFAULT_TMPDIR = /tmp
ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
-DEFAULT_TMPDIR = C:/TEMP
+DEFAULT_TMPDIR = /C/TEMP
endif
ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
-DEFAULT_TMPDIR = C:/TEMP
+DEFAULT_TMPDIR = /C/TEMP
endif
-# FPTOOLS_TOP: the top of the fptools hierarchy, absolute path. (POSIX / unix-style path).
+# FPTOOLS_TOP: the top of the fptools hierarchy, absolute path.
+# On Windows this is a c:/foo/bar style path.
FPTOOLS_TOP_ABS = @hardtop@
-# The platform specific version of 'hardtop'.
-FPTOOLS_TOP_ABS_PLATFORM = @hardtop_plat@
-
-#
-# Installation directories, we don't use half of these,
-# but since the configure script has them on offer while
-# passing through, we might as well set them.
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-bindir = @bindir@
-datadir0 = @datadir@
-libdir0 = @libdir@
-includedir = @includedir@
-oldincludedir = @oldincludedir@
-mandir = @mandir@
-
-ifeq "$(Windows)" "YES"
-ifeq "$(strip $(prefix))" ""
-prefix = c:/ghc
-endif
+BIN_DIST_NAME=ghc-$(ProjectVersion)
+BIN_DIST_TOPDIR_ABS=$(FPTOOLS_TOP_ABS)
+BIN_DIST_DIR=$(BIN_DIST_TOPDIR_ABS)/$(BIN_DIST_NAME)
+BIN_DIST_TARBALL=$(FPTOOLS_TOP_ABS)/$(BIN_DIST_NAME)-$(TARGETPLATFORM).tar.bz2
+
+# Definition of installation directories, we don't use half of these, but since
+# the configure script has them on offer while passing through, we might as well
+# set them. Note that we have to be careful, because the GNU coding standards
+# have changed a bit over the course of time, and autoconf development reflects
+# this.
+#
+# A little bit of history regarding autoconf and GNU coding standards, use this
+# as a cheat-sheet for the stuff below:
+#
+# variable | default < 2.60 | default >= 2.60
+# ------------+--------------------+--------------------------------------
+# exec_prefix | ${prefix} | ${prefix}
+# libdir | ${exec_prefix}/lib | ${exec_prefix}/lib
+# datarootdir | NONE! | ${prefix}/share
+# datadir | ${prefix}/share | ${datarootdir}
+# infodir | ${prefix}/info | ${datarootdir}/info
+# mandir | ${prefix}/man | ${datarootdir}/man
+# docdir | NONE! | ${datarootdir}/doc/${PACKAGE_TARNAME}
+# htmldir | NONE! | ${docdir}
+# dvidir | NONE! | ${docdir}
+# pdfdir | NONE! | ${docdir}
+# psdir | NONE! | ${docdir}
+#
+# NOTE: The default e.g. ${docdir} above means that autoconf substitutes the
+# string "${docdir}", not the value of docdir! This is crucial for the GNU
+# coding standards.
+
+# This gets used in the default docdir when autoconf >= 2.60 is used
+PACKAGE_TARNAME := @PACKAGE_TARNAME@
+
+prefix := @prefix@
+
+# New autoconf (>= 2.60?) make a configure with a --datarootdir=DIR flag.
+# However, in order to support older autoconf's we don't use it.
+# datarootdir is set lower down instead.
+# But, as datadir is defined in terms of datarootdir, we also need to
+# set it to the value (if any) that configure gives it here.
+datarootdir := @datarootdir@
+
+exec_prefix := @exec_prefix@
+bindir := @bindir@
+datadir0 := @datadir@
+libdir0 := @libdir@
+includedir := @includedir@
+mandir := @mandir@
+dynlibdir := @libdir@
+
+ifeq "$(RelocatableBuild)" "YES"
# Hack: our directory layouts tend to be different on Windows, so
# hack around configure's bogus assumptions here.
-datadir = $(prefix)
-libdir = $(prefix)
+datarootdir := $(prefix)
+datadir := $(prefix)
+libdir := $(prefix)
+
+docdir := $(prefix)/doc
+htmldir := $(docdir)
+dvidir := $(docdir)
+pdfdir := $(docdir)
+psdir := $(docdir)
else
-#
-# Unix: override libdir and datadir to put project-specific stuff in
+# Unix: override libdir and datadir to put ghc-specific stuff in
# a subdirectory with the version number included.
-#
-libdir = $(if $(ProjectNameShort),$(libdir0)/$(ProjectNameShort)-$(ProjectVersion),$(libdir0))
-datadir = $(if $(ProjectNameShort),$(datadir0)/$(ProjectNameShort)-$(ProjectVersion),$(datadir0))
+datarootdir := $(datadir0)
+datadir := $(datadir0)/ghc-$(ProjectVersion)
+libdir := $(libdir0)/ghc-$(ProjectVersion)
+
+# New autoconf (>= 2.60?) make a configure with --docdir=DIR etc flags.
+# However, in order to support older autoconf's we don't use them.
+
+#docdir := @docdir@
+#htmldir := @htmldir@
+#dvidir := @dvidir@
+#pdfdir := @pdfdir@
+#psdir := @psdir@
+
+docdir := $(datarootdir)/doc/ghc
+htmldir := $(docdir)
+dvidir := $(docdir)
+pdfdir := $(docdir)
+psdir := $(docdir)
endif # Windows
+headerdir := $(libdir)/include
+
# Default place for putting interface files is $(libdir)
# (overriden for packages in package.mk)
ifacedir = $(libdir)
-#
-# Default values for most of the above are only set if
-# they weren't configured to anything in particular
-# via the configure script. (i.e., we make no assumption
-# that the autoconf-generated script will assign defaults
-# to all of the above).
-#
-ifeq "$(strip $(exec_prefix))" ""
-exec_prefix = $(prefix)
-endif
-ifeq "$(strip $(bindir))" ""
-bindir = $(exec_prefix)/bin
-endif
-
-#
# NOTE: by intention, libexecdir and libdir point to
# the same place.
# => Only way to override this is to set libexecdir= on the command line.
# (NOTE: configure script setting is ignored).
libexecdir = $(libdir)
-ifeq "$(strip $(datadir))" ""
-datadir = $(prefix)/share
-endif
-ifeq "$(strip $(libdir))" ""
-libdir = $(exec_prefix)/lib
-endif
-ifeq "$(strip $(includedir))" ""
-includedir = $(prefix)/include
-endif
-ifeq "$(strip $(oldincludedir))" ""
-oldincludedir = /usr/include
-endif
-ifeq "$(strip $(mandir))" ""
-mandir = $(prefix)/man
-endif
+# This is a bit of a lie, as this is a wrapper rather than the program
+# itself. However, it means that we don't have to worry about Windows
+# and non-Windows having different extensions.
+GHC_PKG_PROG = $(FPTOOLS_TOP_ABS)/$(GHC_PKG_DIR_REL)/ghc-pkg-inplace
#-----------------------------------------------------------------------------
# install configuration
INSTALL_SCRIPT = $(INSTALL) -m 755
INSTALL_SHLIB = $(INSTALL) -m 755
INSTALL_DATA = $(INSTALL) -m 644
+INSTALL_HEADER = $(INSTALL) -m 644
+INSTALL_MAN = $(INSTALL) -m 644
INSTALL_DIR = $(MKDIRHIER)
+#
+# runhaskell and hsc2hs are special, in that other compilers besides
+# GHC might provide them. Systems with a package manager often come
+# with tools to manage this kind of clash, e.g. RPM's
+# update-alternatives. When building a distribution for such a system,
+# we recommend setting both of the following to 'YES'.
+#
+# NO_INSTALL_RUNHASKELL = YES
+# NO_INSTALL_HSC2HS = YES
+#
+# NB. we use negative tests here because for binary-distributions we cannot
+# test build-time variables at install-time, so they must default to on.
+
# -----------------------------------------------------------------------------
# Utilities programs: flags
#
# SRC_HC_OPTS += -O
-SRC_HC_OPTS += -H16m -O
+SRC_HC_OPTS += -H32m -O
# These flags make flex 8-bit
SRC_FLEX_OPTS += -8
-SRC_INSTALL_BIN_OPTS += -s
-
# lint gets all CPP's flags too
SRC_LINT_OPTS += -axz -DLINT $(SRC_CPP_OPTS)
WAY$(_way)_LINT_OPTS += WAY$(_way)_CPP_OPTS
################################################################################
#
-# Utilities programs: where to find them
+# Layout of the source tree
#
################################################################################
-#-----------------------------------------------------------------------------
-# FPtools Utility locations
-
-# By default, the various utils needed to be build ghc and chums
-# is set up to point to the utils/ directory. Define here the
-# path prefix for the utilities. Notice that it's a prefix with
-# a trailing slash, so that it can be concatenated directly on
-# front of a program name; if it's not set then we just look
-# along the shell's $(PATH)
-#
-# If instead you want to use installed or your own versions of these,
-# override the various *_PREFIX in build.mk, i.e., having the following
-# in build.mk:
-#
-# MKDEPENDC_PREFIX=
-#
-# will force `make' to rummage around in your PATH to find `mkdependC' (not
-# sure it would need it in the first place, but still).
-#
-GLAFP_UTILS = $(FPTOOLS_TOP)/glafp-utils
-
-SCRIPT_PREFIX = $(GLAFP_UTILS)/scripts/
-MKDEPENDC_PREFIX = $(GLAFP_UTILS)/mkdependC/
-LTX_PREFIX = $(GLAFP_UTILS)/ltx/
-RUNTEST_PREFIX = $(GLAFP_UTILS)/runstdtest/
-VERBATIM_PREFIX = $(GLAFP_UTILS)/verbatim/
-SGMLVERB_PREFIX = $(GLAFP_UTILS)/sgmlverb/
-ETAGS_PREFIX = $(GLAFP_UTILS)/etags/
-LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/
-MKDIRHIER_PREFIX = $(GLAFP_UTILS)/mkdirhier/
-DOCBOOK_PREFIX = $(GLAFP_UTILS)/docbook/
+# Here we provide defines for the various directories in the source tree,
+# so we can move things around more easily. A define $(GHC_FOO_DIR_REL)
+# indicates a directory relative to the top of the source tree, whereas
+# $(GHC_FOO_DIR) is a directory relative to the current directory.
+# $(GHC_FOO_DIR_ABS) is the absolute path to the directory.
+
+GHC_UTILS_DIR_REL = utils
+GHC_INCLUDE_DIR_REL = includes
+GHC_COMPILER_DIR_REL = compiler
+GHC_RTS_DIR_REL = rts
+GHC_UTILS_DIR_REL = utils
+GHC_DRIVER_DIR_REL = driver
+GHC_COMPAT_DIR_REL = compat
+
+GHC_MKDEPENDC_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdependC
+GHC_LTX_DIR_REL = $(GHC_UTILS_DIR_REL)/ltx
+GHC_RUNTEST_DIR_REL = $(GHC_UTILS_DIR_REL)/runstdtest
+GHC_LNDIR_DIR_REL = $(GHC_UTILS_DIR_REL)/lndir
+GHC_MKDIRHIER_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdirhier
+GHC_DOCBOOK_DIR_REL = $(GHC_UTILS_DIR_REL)/docbook
+GHC_UNLIT_DIR_REL = $(GHC_UTILS_DIR_REL)/unlit
+GHC_HP2PS_DIR_REL = $(GHC_UTILS_DIR_REL)/hp2ps
+GHC_HSTAGS_DIR_REL = $(GHC_UTILS_DIR_REL)/hasktags
+GHC_GHCTAGS_DIR_REL = $(GHC_UTILS_DIR_REL)/ghctags
+GHC_HSC2HS_DIR_REL = $(GHC_UTILS_DIR_REL)/hsc2hs
+GHC_TOUCHY_DIR_REL = $(GHC_UTILS_DIR_REL)/touchy
+GHC_PKG_DIR_REL = $(GHC_UTILS_DIR_REL)/ghc-pkg
+GHC_GENPRIMOP_DIR_REL = $(GHC_UTILS_DIR_REL)/genprimopcode
+GHC_GENAPPLY_DIR_REL = $(GHC_UTILS_DIR_REL)/genapply
+
+GHC_MANGLER_DIR_REL = $(GHC_DRIVER_DIR_REL)/mangler
+GHC_SPLIT_DIR_REL = $(GHC_DRIVER_DIR_REL)/split
+GHC_SYSMAN_DIR_REL = $(GHC_RTS_DIR_REL)/parallel
+
+GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL)
+GHC_INCLUDE_DIR = $(FPTOOLS_TOP)/$(GHC_INCLUDE_DIR_REL)
+GHC_COMPILER_DIR = $(FPTOOLS_TOP)/$(GHC_COMPILER_DIR_REL)
+GHC_RTS_DIR = $(FPTOOLS_TOP)/$(GHC_RTS_DIR_REL)
+GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL)
+GHC_DRIVER_DIR = $(FPTOOLS_TOP)/$(GHC_DRIVER_DIR_REL)
+GHC_COMPAT_DIR = $(FPTOOLS_TOP)/$(GHC_COMPAT_DIR_REL)
+
+GHC_MKDEPENDC_DIR = $(FPTOOLS_TOP)/$(GHC_MKDEPENDC_DIR_REL)
+GHC_LTX_DIR = $(FPTOOLS_TOP)/$(GHC_LTX_DIR_REL)
+GHC_RUNTEST_DIR = $(FPTOOLS_TOP)/$(GHC_RUNTEST_DIR_REL)
+GHC_LNDIR_DIR = $(FPTOOLS_TOP)/$(GHC_LNDIR_DIR_REL)
+GHC_MKDIRHIER_DIR = $(FPTOOLS_TOP)/$(GHC_MKDIRHIER_DIR_REL)
+GHC_DOCBOOK_DIR = $(FPTOOLS_TOP)/$(GHC_DOCBOOK_DIR_REL)
+GHC_UNLIT_DIR = $(FPTOOLS_TOP)/$(GHC_UNLIT_DIR_REL)
+GHC_HP2PS_DIR = $(FPTOOLS_TOP)/$(GHC_HP2PS_DIR_REL)
+GHC_HSTAGS_DIR = $(FPTOOLS_TOP)/$(GHC_HSTAGS_DIR_REL)
+GHC_GHCTAGS_DIR = $(FPTOOLS_TOP)/$(GHC_GHCTAGS_DIR_REL)
+GHC_HSC2HS_DIR = $(FPTOOLS_TOP)/$(GHC_HSC2HS_DIR_REL)
+GHC_TOUCHY_DIR = $(FPTOOLS_TOP)/$(GHC_TOUCHY_DIR_REL)
+GHC_PKG_DIR = $(FPTOOLS_TOP)/$(GHC_PKG_DIR_REL)
+GHC_GENPRIMOP_DIR = $(FPTOOLS_TOP)/$(GHC_GENPRIMOP_DIR_REL)
+GHC_GENAPPLY_DIR = $(FPTOOLS_TOP)/$(GHC_GENAPPLY_DIR_REL)
+
+GHC_MANGLER_DIR = $(FPTOOLS_TOP)/$(GHC_MANGLER_DIR_REL)
+GHC_SPLIT_DIR = $(FPTOOLS_TOP)/$(GHC_SPLIT_DIR_REL)
+GHC_SYSMAN_DIR = $(FPTOOLS_TOP)/$(GHC_SYSMAN_DIR_REL)
+
+GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL)
+GHC_INCLUDE_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_INCLUDE_DIR_REL)
+GHC_COMPILER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPILER_DIR_REL)
+GHC_RTS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RTS_DIR_REL)
+GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL)
+GHC_DRIVER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DRIVER_DIR_REL)
+GHC_COMPAT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPAT_DIR_REL)
+
+GHC_MKDEPENDC_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDEPENDC_DIR_REL)
+GHC_LTX_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LTX_DIR_REL)
+GHC_RUNTEST_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RUNTEST_DIR_REL)
+GHC_LNDIR_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LNDIR_DIR_REL)
+GHC_MKDIRHIER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDIRHIER_DIR_REL)
+GHC_DOCBOOK_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DOCBOOK_DIR_REL)
+GHC_UNLIT_DIR = $(FPTOOLS_TOP_ABS)/$(GHC_UNLIT_DIR_REL)
+GHC_HP2PS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HP2PS_DIR_REL)
+GHC_HSTAGS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSTAGS_DIR_REL)
+GHC_GHCTAGS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GHCTAGS_DIR_REL)
+GHC_HSC2HS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSC2HS_DIR_REL)
+GHC_TOUCHY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_TOUCHY_DIR_REL)
+GHC_PKG_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_PKG_DIR_REL)
+GHC_GENPRIMOP_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENPRIMOP_DIR_REL)
+GHC_GENAPPLY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENAPPLY_DIR_REL)
+
+GHC_MANGLER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MANGLER_DIR_REL)
+GHC_SYSMAN_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SYSMAN_DIR_REL)
+GHC_SPLIT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SPLIT_DIR_REL)
-HADDOCK_PREFIX = $(FPTOOLS_TOP)/haddock/
+# -----------------------------------------------------------------------------
+# Names of programs in the GHC tree
+#
+# xxx_PGM the name of an executable, without the path
+# xxx the executable relative to the current dir
+
+GHC_UNLIT_PGM = unlit$(exeext)
+GHC_HP2PS_PGM = hp2ps
+GHC_HSTAGS_PGM = hasktags
+GHC_GHCTAGS_INPLACE_PGM = ghctags-inplace
+GHC_HSC2HS_INPLACE_PGM = hsc2hs-inplace
+GHC_TOUCHY_PGM = touchy$(exeext)
+GHC_MANGLER_PGM = ghc-asm
+GHC_SPLIT_PGM = ghc-split
+GHC_SYSMAN_PGM = SysMan
+GHC_PKG_INPLACE_PGM = ghc-pkg-inplace
+GHC_GENPRIMOP_PGM = genprimopcode
+GHC_GENAPPLY_PGM = genapply
+GHC_MKDEPENDC_PGM = mkdependC
+GHC_LTX_PGM = ltx
+GHC_MKDIRHIER_PGM = mkdirhier
+GHC_LNDIR_PGM = lndir
+GHC_RUNTEST_PGM = runstdtest
-LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/
+ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+GHC_CP = "xcopy /y"
+GHC_PERL = perl
+else
+GHC_CP = $(CP)
+GHC_PERL = $(PERL)
+endif
-UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/
-HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/
-HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hasktags/
-HSC2HS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hsc2hs/
+UNLIT = $(GHC_UNLIT_DIR)/$(GHC_UNLIT_PGM)
+HP2PS = $(GHC_HP2PS_DIR)/$(GHC_HP2PS_PGM)
+HSTAGS = $(GHC_HSTAGS_DIR)/$(GHC_HSTAGS_PGM)
+GHCTAGS_INPLACE = $(GHC_GHCTAGS_DIR)/$(GHC_GHCTAGS_INPLACE_PGM)
+HSC2HS_INPLACE = $(GHC_HSC2HS_DIR)/$(GHC_HSC2HS_INPLACE_PGM)
+MANGLER = $(GHC_MANGLER_DIR)/$(GHC_MANGLER_PGM)
+SPLIT = $(GHC_SPLIT_DIR)/$(GHC_SPLIT_PGM)
+SYSMAN = $(GHC_SYSMAN_DIR)/$(GHC_SYSMAN_PGM)
+GHC_PKG_INPLACE = $(GHC_PKG_DIR)/$(GHC_PKG_INPLACE_PGM)
+GENPRIMOP = $(GHC_GENPRIMOP_DIR)/$(GHC_GENPRIMOP_PGM)
+GENAPPLY = $(GHC_GENAPPLY_DIR)/$(GHC_GENAPPLY_PGM)
+MKDEPENDC = $(GHC_MKDEPENDC_DIR)/$(GHC_MKDEPENDC_PGM)
+LTX = $(GHC_LTX_DIR)/$(GHC_LTX_PGM)
+MKDIRHIER = $(GHC_MKDIRHIER_DIR)/$(GHC_MKDIRHIER_PGM)
+LNDIR = $(GHC_LNDIR_DIR)/$(GHC_LNDIR_PGM)
+RUNTEST = $(GHC_RUNTEST_DIR)/$(GHC_RUNTEST_PGM)
+
+GENERATED_FILE = chmod a-w
+EXECUTABLE_FILE = chmod +x
#-----------------------------------------------------------------------------
# Haskell compilers and mkdependHS
GHC = @WithGhc@
GhcDir = $(dir $(GHC))
-GhcVersion = @GhcVersion@
+
+# Set to YES if $(GHC) has the editline package installed
+GhcHasEditline = @GhcHasEditline@
+
+HBC = @HBC@
+NHC = @NHC@
+
+# Sometimes we want to invoke ghc from the build tree in different
+# places (eg. it's handy to have a nofib & a ghc build in the same
+# tree). We can refer to "this ghc" as $(GHC_INPLACE):
+
+GHC_INPLACE = $(GHC_COMPILER_DIR)/ghc-inplace
+GHC_STAGE1 = $(GHC_COMPILER_DIR)/stage1/ghc-inplace -no-user-package-conf
+GHC_STAGE2 = $(GHC_COMPILER_DIR)/stage2/ghc-inplace -no-user-package-conf
+GHC_STAGE3 = $(GHC_COMPILER_DIR)/stage3/ghc-inplace -no-user-package-conf
+
+# NOTE: add -no-user-package-conf for stage 1-3 above, so that
+# we avoid picking up any packages the user might happen to have
+# installed for this GHC version. They are bound to be incompatible
+# with the packages we built in the tree.
+
+ifeq "$(stage)" "2"
+ UseStage1 = YES
+endif
+ifneq "$(findstring YES, $(UseStage1) $(BootingFromHc))" ""
+
+# We are using the stage1 compiler to compile Haskell code, set up
+# some variables appropriately:
+HC =$(GHC_STAGE1)
+MKDEPENDHS =$(GHC_STAGE1)
+GhcVersion = @ProjectVersion@
+GhcPatchLevel = @ProjectPatchLevel@
+# oops, these are wrong:
GhcMajVersion = @GhcMajVersion@
GhcMinVersion = @GhcMinVersion@
+
+ghc_ge_605 = YES
+ghc_ge_607 = YES
+
+else # not UseStage1 or BootingFromHc
+
+HC = @WithHc@
+MKDEPENDHS = $(GHC)
+GhcVersion = @GhcVersion@
GhcPatchLevel = @GhcPatchLevel@
+GhcMajVersion = @GhcMajVersion@
+GhcMinVersion = @GhcMinVersion@
+
+# Some useful GHC version predicates:
+ghc_ge_605 = @ghc_ge_605@
+ghc_ge_607 = @ghc_ge_607@
+endif
# Canonicalised ghc version number, used for easy (integer) version
# comparisons. We must expand $(GhcMinVersion) to two digits by
GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion)
endif
-HBC = @HBC@
-NHC = @NHC@
-
-HC = @WithHc@
-MKDEPENDHS = $(GHC)
-
-# Sometimes we want to invoke ghc from the build tree in different
-# projects (eg. it's handy to have a nofib & a ghc build in the same
-# tree). We can refer to "this ghc" as $(GHC_INPLACE):
-
-GHC_INPLACE = $(FPTOOLS_TOP)/ghc/compiler/ghc-inplace
-GHC_STAGE1 = $(FPTOOLS_TOP)/ghc/compiler/stage1/ghc-inplace
-GHC_STAGE2 = $(FPTOOLS_TOP)/ghc/compiler/stage2/ghc-inplace
-GHC_STAGE3 = $(FPTOOLS_TOP)/ghc/compiler/stage3/ghc-inplace
-
#-----------------------------------------------------------------------------
# C compiler
#
HaveLibGmp = @HaveLibGmp@
LibGmp = @LibGmp@
+GMP_INCLUDE_DIRS=@GMP_INCLUDE_DIRS@
+GMP_LIB_DIRS=@GMP_LIB_DIRS@
+
#-----------------------------------------------------------------------------
# GMP framework (Mac OS X)
#
# The reason for having to do this is that overly long command lines
# cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
# 2.5.1), which is why this backdoor is provided. The situation of overly
-# long command lines is either encountered while doing `make boot' in ghc/compiler,
+# long command lines is either encountered while doing `make boot' in compiler/,
# or when linking the compiler binary (`hsc').
#
# We do not use SHELL to execute long commands, as `make' will more than likely
TAR = @TarCmd@
ZIP = zip
+HSCOLOUR = @HSCOLOUR@
+
#
# This is special to literate/, ToDo: add literate-specific
# configure setup to literate/.
TROFF = troff
UNAME = uname
+# GTK+
+GTK_CONFIG = @GTK_CONFIG@
+
+# Set this if you want to use Inno Setup to build a Windows installer
+# when you make a bindist
+ISCC =
+
#-----------------------------------------------------------------------------
# DocBook XML stuff
#-----------------------------------------------------------------------------
# FPtools support software
-# Stuff from fptools/glafp-utils
-MKDEPENDC = $(MKDEPENDC_PREFIX)mkdependC
-LTX = $(LTX_PREFIX)ltx
-MKDIRHIER = $(MKDIRHIER_PREFIX)mkdirhier
-LNDIR = $(LNDIR_PREFIX)lndir
-ETAGS = $(ETAGS_PREFIX)etags
-VERBATIM = $(VERBATIM_PREFIX)verbatim
-SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb
-RUNTEST = $(RUNTEST_PREFIX)runstdtest
-
BLD_DLL = dllwrap
#
#
# Options to pass to Happy when we're going to compile the output with GHC
#
-GHC_HAPPY_OPTS = -agc
+GHC_HAPPY_OPTS = -agc --strict
# Temp. to work around performance problems in the HEAD around 8/12/2003,
# A Happy compiled with this compiler needs more stack.
# Haddock
#
HADDOCK = @HaddockCmd@
-HADDOCK_INPLACE = $(HADDOCK_PREFIX)/src/haddock-inplace
-
-#
-# Stuff from fptools/literate
-#
-LIT2PGM = $(LITERATE_PREFIX)lit2pgm
-LIT2HTML = $(LITERATE_PREFIX)lit2html
-LIT2LATEX = $(LITERATE_PREFIX)lit2latex
-MKDEPENDLIT = $(LITERATE_PREFIX)mkdependlit
-LIT2CHANGELOG = $(LITERATE_PREFIX)lit2changelog
-LIT2TEXT = $(LITERATE_PREFIX)lit2text
#
-# Stuff from fptools/ghc/utils
-#
-UNLIT = $(UNLIT_PREFIX)unlit$(exeext)
-HP2PS = $(HP2PS_PREFIX)hp2ps$(exeext)
-HSTAGS = $(HSTAGS_PREFIX)hasktags
-HSC2HS = $(HSC2HS_PREFIX)hsc2hs-inplace
-
-#
-# Options for the compiling different `ways'. Various projects within
-# the glorious fptools tree support building in various user-configured
-# ways. For instance, you could set up one `way' such that the prelude
-# libraries all were built with the option -ffoldr-build-on.
+# Options for compiling in different `ways'.
#
# To configure up your own way, have a look at some of the standard ways
# such as profiling, and create your own set of WAY_*_OPTS defs below.
#
#
-# IMPORTANT! The WAYS variable configures the different `ways'
-# you want to build a project (or maybe just parts of it, as is
-# the case for ghc/). This variable is intended set inside the
-# project mk setup, enforcing a global fptools WAYS is a bit too
-# much (do you *really* want to build glafp-utils the profiled-concurrent
-# way?)
-#
-
-#
# Definitions of the different ways:
#
# * their name:
#
# The ways currently defined.
#
-ALL_WAYS=p t u s mp mg a b c d e f g h i j k l m n o A B
+ALL_WAYS=p t s mp mg a b c d e f g h i j k l m n o A B
USER_WAYS=a b c d e f g h j k l m n o A B
#
-# The following ways currently have treated specially, p u t mg,
+# The following ways currently have treated specially, p t mg,
# as the driver script treats these guys specially and needs to carefully be told
# about the options for these. Hence, we hide the required command line options
-# for these in the ghc/driver, as this is the only place they are needed.
+# for these in the driver, as this is the only place they are needed.
#
# If you want to add to these default options, fill in the variables below:
WAY_t_NAME=ticky-ticky profiling
WAY_t_HC_OPTS= -ticky
-# Way `u':
-WAY_u_NAME=unregisterized (using portable C only)
-WAY_u_HC_OPTS=-unreg
-
-# Way `s':
-WAY_s_NAME=threads (for SMP)
-WAY_s_HC_OPTS=-smp -optc-DTHREADED_RTS
-
# Way `mp':
WAY_mp_NAME=parallel
WAY_mp_HC_OPTS=-parallel
WAY_debug_p_NAME=debug profiled
WAY_debug_p_HC_OPTS=-optc-DDEBUG -prof
-# Way 'debug_u':
-WAY_debug_u_NAME=debug unregisterised
-WAY_debug_u_HC_OPTS=-optc-DDEBUG -unreg
-
-# Way 'debug_s':
-WAY_debug_s_NAME=debug SMP
-WAY_debug_s_HC_OPTS=-optc-DDEBUG -optc-DTHREADED_RTS -smp
+# Way 'debug_t':
+WAY_debug_t_NAME=debug ticky-ticky profiling
+WAY_debug_t_HC_OPTS= -ticky -optc-DDEBUG
# Way 'thr_debug':
WAY_thr_debug_NAME=threaded
WAY_thr_debug_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG
# Way 'thr_debug_p':
-WAY_thr_debug_p_NAME=threaded
+WAY_thr_debug_p_NAME=threaded debug profiling
WAY_thr_debug_p_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -prof
+# Way 'dyn': build dynamic shared libraries
+WAY_dyn_NAME=dyn
+WAY_dyn_HC_OPTS=-fPIC -dynamic
+WAY_dyn_LIB_TARGET=libHSrts-gcc661.so
+
+# Way 'thr_dyn':
+WAY_thr_dyn_NAME=thr_dyn
+WAY_thr_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS
+
+# Way 'thr_debug_dyn':
+WAY_thr_debug_dyn_NAME=thr_dyn
+WAY_thr_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS -optc-DDEBUG
+
+# Way 'debug_dyn':
+WAY_debug_dyn_NAME=thr_dyn
+WAY_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DDEBUG
+
#
# Add user-way configurations here:
#
# GhcLibCppOpts += -DWORD_SIZE_IN_BITS=31
# SplitObjs=NO
+################################################################################
+#
+# Library configure arguments
+#
+################################################################################
+
+CONFIGURE_ARGS = @CONFIGURE_ARGS@
+
+################################################################################
+#
+# Bindist testing directory
+#
+################################################################################
+
+ifeq "$(Windows)" "YES"
+BIN_DIST_INST_SUBDIR = "install dir"
+else
+# I very much doubt that paths with spaces will work on Unix
+BIN_DIST_INST_SUBDIR = installed
+endif
+
+BIN_DIST_INST_DIR = $(FPTOOLS_TOP_ABS)/bindisttest/$(BIN_DIST_INST_SUBDIR)
+
projects / ghc-hetmet.git / blobdiff