#
################################################################################
#
-# config.mk.in-template
+# config.mk.in
#
-# This file defines all the variables that set the configuration of
-# a particular build.
+# This file supplies defaults for many tweakable build configuration
+# options. Some of the defaults are filled in by the autoconf-generated
+# configure script.
#
+# DO NOT EDIT THIS FILE!
#
-################################################################################
-
-# The configuration is defined in two steps:
-#
-# 1. The builder (i.e. the person doing the build)
-# copies this file, config.mk.in-template
-# to config.mk.in
+# - config.mk is auto-generated from config.mk.in by configure.
+# This may be triggered automatically by the build system (say
+# if config.mk.in has changed more recently than config.mk),
+# so if you edit config.mk your changes will be spammed.
#
-# 2. S/he then edits it manually (gasp) to reflect any configuration
-# options s/he wants.
-#
-# 3. Then s/he runs "configure", which generates config.mk from
-# config.mk.in, substituting for system/platform-dependent things
-# enclosed in @at-signs@.
+# - Settings in this file may be overriden by giving replacement
+# definitions in build.mk. If you don't have a build.mk file
+# then you get defaults for everything. The defaults should
+# provide a reasonable vanilla build.
#
# This is one of only two files that configure generates (the other is config.h)
#
-# Note that after subsequent edits of config.mk.in for a build, the configure script
-# will have to be re-run manually to have the change reflected in config.mk.
-#
-
# There is a section below for each project within the fptools suite
#
# PLUS
# BootingFromHc - build GHC and the libraries from .hc files?
BootingFromHc = @BootingFromHc@
+# BootingFromUnregisterisedHc - treat .hc files as containing unregisterised
+# rather than registerised code, i.e., disable the mangler?
+BootingFromUnregisterisedHc = @BootingFromUnregisterisedHc@
+
# build the libs first if we're bootstrapping from .hc files
ifeq "$(BootingFromHc)" "YES"
AllProjects = glafp-utils hslibs ghc green-card happy hdirect hood nofib
#
IncludeTestDirsInBuild=NO
+#
+# Which ways should SGML documents be built?
+# options are: dvi ps pdf html rtf
+#
+SGMLDocWays=
+
################################################################################
#
# GHC project
# Extra option flags to pass to the compiler that compiles the compiler
# (Ones that are essential are wired into ghc/compiler/Makefile)
-# Typical ones:
-# -H25m allocate a bigger heap (might speed up compilation)
-#
-# -O compile an optimised compiler
+# Typical options to use here:
#
-# -DDEBUG include consistency/assertion checks in the compiled compiler
+# -DDEBUG include debugging code and assertions (will make the
+# compiler slower and produce debugging output, but useful
+# for development)
#
# -dcore-lint check the types after every pass of the compiler;
-# a pretty strong internal check
-GhcHcOpts=-O -Rghc-timing
+# a pretty strong internal check of the compiler being
+# used to compile GHC. Useful when bootstrapping.
+GhcHcOpts=-Rghc-timing
+
+# Extra Haskell compiler options to use when compiling all Haskell
+# *programs* (not libraries), including GHC itself.
+# Typical options to use here:
+#
+# -H25m use a bigger heap (to speed up compilation)
+#
+# -O compile an optimised compiler
+#
+FptoolsHcOpts=-O
# Build a compiler that will build *unregisterised* libraries and
# binaries by default. Unregisterised code is supposed to compile and
# (as well as a C backend)
#
# Target platforms supported:
-# i386, alpha & sparc
-ifneq "$(findstring $(HostArch_CPP), i386 alpha sparc)" ""
+# i386 & sparc
+ifneq "$(findstring $(HostArch_CPP), i386 sparc)" ""
GhcWithNativeCodeGen=YES
else
GhcWithNativeCodeGen=NO
endif
+# Include support for generating Java
+GhcWithJavaGen=NO
+
HaveLibDL = @HaveLibDL@
# Include GHCi in the compiler. Default to NO for the time being.
# hslibs for GHC also uses the following variables (defined above):
# GhcLibWays, GhcLibHcOpts, GhcLibToolsHcOpts, DLLized, StripLibraries
-# Haskell compiler options for tools in hslibs
-GhcLibToolsHcOpts=-O
-
# Build the Haskell Readline bindings?
#
GhcLibsWithReadline=@HaveReadlineHeaders@
DEFAULT_TMPDIR = C:/TEMP
endif
-# FPTOOLS_TOP: the top of the fptools hierarchy, absolute path.
-
-ifeq "$(findstring $(TARGETPLATFORM), i386-unknown-cygwin32 i386-unknown-mingw32)" ""
+# FPTOOLS_TOP: the top of the fptools hierarchy, absolute path. (POSIX / unix-style path).
FPTOOLS_TOP_ABS = @hardtop@
-else
-FPTOOLS_TOP_ABS = $(subst \,/,$(shell cygpath -w @hardtop@))
-endif
-# Keep the Unix-style path to use with Unix tools (e.g. in ghc-inplace script)
-FPTOOLS_TOP_ABS_UNIX = @hardtop@
+# The platform specific version of 'hardtop'.
+FPTOOLS_TOP_ABS_PLATFORM = @hardtop_plat@
#
# Installation directories, we don't use half of these,
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
-datadir = @datadir@
+datadir0 = @datadir@
#sysconfdir = @datadir@
#sharedstatedir = @sharedstatedir@
#localstatedir = @localstatedir@
-libdir = @libdir@
+ifneq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+libdir0 = @libdir@
+else
+libdir0 = @prefix@
+endif
includedir = @includedir@
oldincludedir = @oldincludedir@
mandir = @mandir@
# override libdir and datadir to put project-specific stuff in
# a subdirectory with the version number included.
#
-libdir := $(if $(ProjectNameShort),$(libdir)/$(ProjectNameShort)-$(ProjectVersion),$(libdir))
-datadir := $(if $(ProjectNameShort),$(datadir)/$(ProjectNameShort)-$(ProjectVersion),$(datadir))
+ifneq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+libdir = $(if $(ProjectNameShort),$(libdir0)/$(ProjectNameShort)-$(ProjectVersion),$(libdir0))
+datadir = $(if $(ProjectNameShort),$(datadir0)/$(ProjectNameShort)-$(ProjectVersion),$(datadir0))
+else
+libdir = $(libdir0)
+datadir = $(datadir0)
+endif
#
# Default values for most of the above are only set if
GhcMajVersion = @GhcMajVersion@
GhcMinVersion = @GhcMinVersion@
GhcPatchLevel = @GhcPatchLevel@
+# Canonicalised ghc version number, used for easy (integer) version comparisons.
+GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion)
HBC = @HBC@
NHC = @NHC@
#-----------------------------------------------------------------------------
# C compiler
#
-#
+# NB. Don't override $(WhatGccIsCalled) using build.mk, re-configure using
+# the flag --with-gcc=<blah> instead. The reason is that the configure script
+# needs to know which gcc you're using in order to perform its tests.
+
HaveGcc = @HaveGcc@
UseGcc = YES
WhatGccIsCalled = @WhatGccIsCalled@
# Other standard (ha!) Unix utilities
AR = @ArCmd@
+ArSupportsInput = @ArSupportsInput@
# Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
BASH = /usr/local/bin/bash
#
CONTEXT_DIFF = @ContextDiffCmd@
CP = cp
-CPP = @CPP@
+CPP = @CPP@ @CPPFLAGS@
CTAGS = $(ETAGS)
-RAWCPP = $(CPP) -undef -traditional
+#
+# RAWCPP_FLAGS are the flags to give to cpp (viz, gcc -E) to persuade it to
+# behave plausibly on Haskell sources.
+#
+RAWCPP_FLAGS = -undef -traditional
FIND = @FindCmd@
INSTALL = @INSTALL@
#
RM = rm -f
SED = @SedCmd@
SHELL = /bin/sh
+
+# Some ld's support the -x flag and some don't, so the configure
+# script detects which we have and sets LdXFlag to "-x" or ""
+# respectively.
+LD = @LdCmd@
+LD_X = @LdXFlag@
+
#
# In emergency situations, REAL_SHELL is used to perform shell commands
# from within the ghc driver script, by scribbling the command line to
BLD_DLL = dllwrap
#
+# .NET support software
+#
+ILX2IL = ilx2il
+ILASM = ilasm
+
+#
# Happy
#
HAPPY = @HappyCmd@
#
# Options to pass to Happy when we're going to compile the output with GHC
#
-GHC_HAPPY_OPTS = $(shell if ( test `echo $(HAPPY_VERSION) | sed -e "s/\(.*\)\..*/\1/g"` "-gt" "1" || test `echo $(HAPPY_VERSION) | sed -e "s/.*\.\(.*\)/\1/g"` "-ge" "9" ); then echo -agc; else echo -g; fi)
+GHC_HAPPY_OPTS = @HappyOpts@
#
# Stuff from fptools/literate
# The ways currently defined.
#
ALL_WAYS=p t u s mp mg a b c d e f g h i j k l m n o A B
-USER_WAYS=a b c d e f g h i j k l m n o A B
+USER_WAYS=a b c d e f g h j k l m n o A B
#
# The following ways currently have treated specially, p u t mg,
#
# If you want to add to these default options, fill in the variables below:
+# Way 'i':
+WAY_i_NAME=ILX
+WAY_i_HC_OPTS= -filx -fruntime-types
+
# Way 'p':
WAY_p_NAME=profiling
WAY_p_HC_OPTS= -prof
WAY_h_NAME=
WAY_h_HC_OPTS=
-WAY_i_NAME=
-WAY_i_HC_OPTS=
-
WAY_j_NAME=
WAY_j_HC_OPTS=
WAY_o_NAME=
WAY_o_HC_OPTS=
+
+################################################################################
+#
+# 31-bit-Int Core files
+#
+################################################################################
+
+#
+# It is possible to configure the compiler and prelude to support 31-bit
+# integers, suitable for a back-end and RTS using a tag bit on a 32-bit
+# architecture. Currently the only useful output from this option is external Core
+# files. The following additions to your build.mk will produce the
+# 31-bit core output. Note that this is *not* just a library "way"; the
+# compiler must be built a special way too.
+
+# GhcCppOpts +=-DWORD_SIZE_IN_BITS=31
+# GhcLibHcOpts +=-fext-core -fno-code -DWORD_SIZE_IN_BITS=31
+# GhcLibCppOpts += -DWORD_SIZE_IN_BITS=31
+# SplitObjs=NO
+
projects / ghc-hetmet.git / blobdiff