# DO NOT EDIT THIS FILE!
#
# - config.mk is auto-generated from config.mk.in by configure.
-# This may be triggered automatically by the build system (say
-# if config.mk.in has changed more recently than config.mk),
-# so if you edit config.mk your changes will be spammed.
+# If you edit config.mk your changes will be spammed.
#
# - Settings in this file may be overriden by giving replacement
# definitions in build.mk. See build.mk.sample for a good
TOP = @hardtop@
include $(TOP)/mk/project.mk
+include $(TOP)/mk/install.mk
################################################################################
#
################################################################################
# BootingFromHc - build GHC and the libraries from .hc files?
+# (unregisterised only)
BootingFromHc = @BootingFromHc@
-# BootingFromUnregisterisedHc - treat .hc files as containing unregisterised
-# rather than registerised code, i.e., disable the mangler?
-BootingFromUnregisterisedHc = @BootingFromUnregisterisedHc@
-
NO_INCLUDE_DEPS = NO
NO_INCLUDE_PKGDATA = NO
GhcDebugged=NO
GhcLibProfiled=$(if $(filter p,$(GhcLibWays)),YES,NO)
-# Build shared and/or static libs?
-BuildSharedLibs=@BuildSharedLibs@
+# Do we support shared libs?
+PlatformSupportsSharedLibs = $(if $(filter $(TARGETPLATFORM),i386-unknown-linux x86_64-unknown-linux),YES,NO)
+
# ToDo later:
# BuildStaticLibs=@BuildStaticLibs@
HaveLibDL = @HaveLibDL@
# ArchSupportsSMP should be set iff there is support for that arch in
-# includes/SMP.h
+# includes/stg/SMP.h
ArchSupportsSMP=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 sparc powerpc)))
# lazy test, because $(GhcUnregisterised) might be set in build.mk later.
GhcLibWays += p
endif
-ifeq "$(BuildSharedLibs)" "YES"
+ifeq "$(PlatformSupportsSharedLibs)" "YES"
GhcLibWays += dyn
endif
+# Handy way to test whether we're building shared libs or not.
+BuildSharedLibs=$(strip $(if $(findstring dyn,$(GhcLibWays)),YES,NO))
+
# In addition, the RTS is built in some further variations. Ways that
# make sense here:
#
# debug_t : debugging ticky-ticky profiling
# l : event logging
# thr_l : threaded and event logging
-# thr_debug_l : threaded and debugging and event logging
#
GhcRTSWays=l
GhcRTSWays += debug
endif
-ifeq "$(BuildSharedLibs)" "YES"
-GhcRTSWays += dyn debug_dyn thr_dyn thr_debug_dyn
-endif
-
# Want the threaded versions unless we're unregisterised
# Defer the check until later by using $(if..), because GhcUnregisterised might
# be set in build.mk, which hasn't been read yet.
GhcRTSWays += $(if $(findstring NO, $(GhcUnregisterised)),thr thr_debug thr_l,)
GhcRTSWays += $(if $(findstring p, $(GhcLibWays)),$(if $(findstring NO, $(GhcUnregisterised)),thr_p,),)
+GhcRTSWays += $(if $(findstring dyn, $(GhcLibWays)), dyn debug_dyn $(if $(findstring NO, $(GhcUnregisterised)),thr_dyn thr_debug_dyn),)
# We can only build GHCi threaded if we have a threaded RTS:
GhcThreaded = $(if $(findstring thr,$(GhcRTSWays)),YES,NO)
#
GhcLibsWithUnix=@GhcLibsWithUnix@
+CHECK_PACKAGES = NO
+
# ----------------------------------------------------------------------------
# Options for GHC's RTS
WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-i386-windows
WINDOWS_INSTALLER = $(WINDOWS_INSTALLER_BASE)$(exeext)
-# Definition of installation directories, we don't use half of these, but since
-# the configure script has them on offer while passing through, we might as well
-# set them. Note that we have to be careful, because the GNU coding standards
-# have changed a bit over the course of time, and autoconf development reflects
-# this.
-#
-# A little bit of history regarding autoconf and GNU coding standards, use this
-# as a cheat-sheet for the stuff below:
-#
-# variable | default < 2.60 | default >= 2.60
-# ------------+--------------------+--------------------------------------
-# exec_prefix | ${prefix} | ${prefix}
-# libdir | ${exec_prefix}/lib | ${exec_prefix}/lib
-# datarootdir | NONE! | ${prefix}/share
-# datadir | ${prefix}/share | ${datarootdir}
-# infodir | ${prefix}/info | ${datarootdir}/info
-# mandir | ${prefix}/man | ${datarootdir}/man
-# docdir | NONE! | ${datarootdir}/doc/${PACKAGE_TARNAME}
-# htmldir | NONE! | ${docdir}
-# dvidir | NONE! | ${docdir}
-# pdfdir | NONE! | ${docdir}
-# psdir | NONE! | ${docdir}
-#
-# NOTE: The default e.g. ${docdir} above means that autoconf substitutes the
-# string "${docdir}", not the value of docdir! This is crucial for the GNU
-# coding standards.
-
-# This gets used in the default docdir when autoconf >= 2.60 is used
-PACKAGE_TARNAME := @PACKAGE_TARNAME@
-
-prefix := @prefix@
-
-# New autoconf (>= 2.60?) make a configure with a --datarootdir=DIR flag.
-# However, in order to support older autoconf's we don't use it.
-# datarootdir is set lower down instead.
-# But, as datadir is defined in terms of datarootdir, we also need to
-# set it to the value (if any) that configure gives it here.
-datarootdir := @datarootdir@
-
-exec_prefix := @exec_prefix@
-bindir := @bindir@
-datadir0 := @datadir@
-libdir0 := @libdir@
-includedir := @includedir@
-mandir := @mandir@
-dynlibdir := @libdir@
-
-ifeq "$(RelocatableBuild)" "YES"
-
-# Hack: our directory layouts tend to be different on Windows, so
-# hack around configure's bogus assumptions here.
-datarootdir := $(prefix)
-datadir := $(prefix)/lib
-libdir := $(prefix)/lib
-
-docdir := $(prefix)/doc
-htmldir := $(docdir)
-dvidir := $(docdir)
-pdfdir := $(docdir)
-psdir := $(docdir)
-
-else
-
-# Unix: override libdir and datadir to put ghc-specific stuff in
-# a subdirectory with the version number included.
-#
-# datadir is set to libdir here as GHC needs package.conf and unlit
-# to be in the same place (and things like ghc-pkg need to agree on
-# where package.conf is, so we just set it globally).
-#
-datarootdir := $(datadir0)
-libdir := $(libdir0)/ghc-$(ProjectVersion)
-datadir := $(libdir)
-
-# New autoconf (>= 2.60?) make a configure with --docdir=DIR etc flags.
-# However, in order to support older autoconf's we don't use them.
-
-#docdir := @docdir@
-#htmldir := @htmldir@
-#dvidir := @dvidir@
-#pdfdir := @pdfdir@
-#psdir := @psdir@
-
-docdir := $(datarootdir)/doc/ghc
-htmldir := $(docdir)
-dvidir := $(docdir)
-pdfdir := $(docdir)
-psdir := $(docdir)
-
-endif # Windows
-
-headerdir := $(libdir)/include
-
-# Default place for putting interface files is $(libdir)
-# (overriden for packages in package.mk)
-ifacedir = $(libdir)
-
-# NOTE: by intention, libexecdir and libdir point to
-# the same place.
-# => Only way to override this is to set libexecdir= on the command line.
-# (NOTE: configure script setting is ignored).
-libexecdir = $(libdir)
-
-#-----------------------------------------------------------------------------
-# install configuration
-
-#
-# Set this to have files installed with a specific owner
-#
-INSTALL_OWNER =
-
-#
-# Set this to have files installed with a specific group
-#
-INSTALL_GROUP =
-
-#
-# Invocations of `install' for the four different classes
-# of targets:
-#
-INSTALL_PROGRAM = $(INSTALL) -m 755
-INSTALL_SCRIPT = $(INSTALL) -m 755
-INSTALL_SHLIB = $(INSTALL) -m 755
-INSTALL_DATA = $(INSTALL) -m 644
-INSTALL_HEADER = $(INSTALL) -m 644
-INSTALL_MAN = $(INSTALL) -m 644
-INSTALL_DIR = $(MKDIRHIER)
-
-#
-# runhaskell and hsc2hs are special, in that other compilers besides
-# GHC might provide them. Systems with a package manager often come
-# with tools to manage this kind of clash, e.g. RPM's
-# update-alternatives. When building a distribution for such a system,
-# we recommend setting both of the following to 'YES'.
-#
-# NO_INSTALL_RUNHASKELL = YES
-# NO_INSTALL_HSC2HS = YES
-#
-# NB. we use negative tests here because for binary-distributions we cannot
-# test build-time variables at install-time, so they must default to on.
-
# -----------------------------------------------------------------------------
# Utilities programs: flags
UseGcc = YES
WhatGccIsCalled = @WhatGccIsCalled@
GccVersion = @GccVersion@
+GccLT34 = @GccLT34@
ifeq "$(strip $(HaveGcc))" "YES"
ifneq "$(strip $(UseGcc))" "YES"
CC = cc
endif
endif
-# default C compiler and linker flags
-SRC_CC_OPTS = @SRC_CC_OPTS@
-SRC_LD_OPTS = @SRC_LD_OPTS@
+# C compiler and linker flags from configure (e.g. -m<blah> to select
+# correct C compiler backend).
+CONF_CC_OPTS = @CONF_CC_OPTS@
+CONF_LD_OPTS = @CONF_LD_OPTS@
ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux"
-SRC_CC_OPTS += -G0
+CONF_CC_OPTS += -G0
endif
SRC_HSC2HS_OPTS += $(addprefix --cflag=,$(filter-out -O,$(SRC_CC_OPTS)))
#
# The ways currently defined.
#
-ALL_WAYS=v p t l s mp mg debug dyn thr thr_l debug_dyn thr_dyn thr_debug_dyn thr_p thr_debug thr_debug_l debug_p thr_debug_p
-USER_WAYS=a b c d e f g h j k l m n o A B
+ALL_WAYS=v p t l s mp mg debug dyn thr thr_l debug_dyn thr_dyn thr_debug_dyn thr_p thr_debug debug_p thr_debug_p
#
# The following ways currently have treated specially, p t mg,
WAY_thr_debug_p_NAME=threaded debug profiling
WAY_thr_debug_p_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -prof
-# Way 'thr_debug_l':
-WAY_thr_debug_l_NAME=threaded debug event logging
-WAY_thr_debug_l_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -eventlog
-
# Way 'dyn': build dynamic shared libraries
WAY_dyn_NAME=dyn
WAY_dyn_HC_OPTS=-fPIC -dynamic
-WAY_dyn_LIB_TARGET=libHSrts-gcc661.so
# Way 'thr_dyn':
WAY_thr_dyn_NAME=thr_dyn
WAY_debug_dyn_NAME=thr_dyn
WAY_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DDEBUG
-#
-# Add user-way configurations here:
-#
-WAY_A_NAME=
-WAY_A_HC_OPTS=
-
-WAY_B_NAME=
-WAY_B_HC_OPTS=
-
-WAY_a_NAME=
-WAY_a_HC_OPTS=
-
-WAY_b_NAME=
-WAY_b_HC_OPTS=
-
-WAY_c_NAME=
-WAY_c_HC_OPTS=
-
-WAY_d_NAME=
-WAY_d_HC_OPTS=
-
-WAY_e_NAME=
-WAY_e_HC_OPTS=
-
-WAY_f_NAME=
-WAY_f_HC_OPTS=
-
-WAY_g_NAME=
-WAY_g_HC_OPTS=
-
-WAY_h_NAME=
-WAY_h_HC_OPTS=
-
-WAY_j_NAME=
-WAY_j_HC_OPTS=
-
-WAY_k_NAME=
-WAY_k_HC_OPTS=
-
-WAY_l_NAME=
-WAY_l_HC_OPTS=
-
-WAY_m_NAME=
-WAY_m_HC_OPTS=
-
-WAY_n_NAME=
-WAY_n_HC_OPTS=
-
-WAY_o_NAME=
-WAY_o_HC_OPTS=
-
################################################################################
#
# 31-bit-Int Core files
################################################################################
#
+# To be passed to sub-builds
+#
+################################################################################
+
+ICONV_INCLUDE_DIRS = @ICONV_INCLUDE_DIRS@
+ICONV_LIB_DIRS = @ICONV_LIB_DIRS@
+
+################################################################################
+#
# Bindist testing directory
#
################################################################################
projects / ghc-hetmet.git / blobdiff