-#
+# -*-makefile-*-
# @configure_input@
#
-#################################################################################
-#
-# config.mk.in-template
+################################################################################
#
-# This file defines all the variables that set the configuration of
-# a particular build.
+# config.mk.in
#
+# This file supplies defaults for many tweakable build configuration
+# options. Some of the defaults are filled in by the autoconf-generated
+# configure script.
#
-#################################################################################
-
-# The configuration is defined in two steps:
+# DO NOT EDIT THIS FILE!
#
-# 1. The builder (i.e. the person doing the build)
-# copies this file, config.mk.in-template
-# to config.mk.in
+# - config.mk is auto-generated from config.mk.in by configure.
+# This may be triggered automatically by the build system (say
+# if config.mk.in has changed more recently than config.mk),
+# so if you edit config.mk your changes will be spammed.
#
-# 2. S/he then edits it manually (gasp) to reflect any configuration
-# options s/he wants.
+# - Settings in this file may be overriden by giving replacement
+# definitions in build.mk. See build.mk.sample for a good
+# starting point for a build.mk file.
#
-# 3. Then s/he runs "configure", which generates config.mk from
-# config.mk.in, substituting for system/platform-dependent things
-# enclosed in @at-signs@.
+# If you don't have a build.mk file then you get defaults for everything.
+# The defaults should provide a reasonable vanilla build.
#
# This is one of only two files that configure generates (the other is config.h)
#
-# Note that after subsequent edits of config.mk.in for a build, the configure script
-# will have to be re-run manually to have the change reflected in config.mk.
-#
-
# There is a section below for each project within the fptools suite
#
# PLUS
# included by boilerplate.mk (see boilerplate.mk for a list).
-#################################################################################
+################################################################################
#
# Project-wide platform variables
#
-#################################################################################
+################################################################################
# A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
# specifier. E.g. sparc-sun-solaris2
#
LeadingUnderscore=@LeadingUnderscore@
-# Pin a suffix on executables? If so, what. (cygwin32 only).
+# Pin a suffix on executables? If so, what (Windows only).
exeext=@exeext@
-#################################################################################
+################################################################################
#
# project-wide flags
#
# Set of options applicable to all fptools projects
#
-#################################################################################
+################################################################################
+
+# BootingFromHc - build GHC and the libraries from .hc files?
+BootingFromHc = @BootingFromHc@
+
+# BootingFromUnregisterisedHc - treat .hc files as containing unregisterised
+# rather than registerised code, i.e., disable the mangler?
+BootingFromUnregisterisedHc = @BootingFromUnregisterisedHc@
+
+# build the libs first if we're bootstrapping from .hc files
+ifeq "$(BootingFromHc)" "YES"
+AllProjects = glafp-utils libraries hslibs ghc greencard happy hdirect hood nofib haddock alex
+else
+AllProjects = glafp-utils ghc libraries hslibs greencard happy hdirect hood nofib haddock alex
+endif
#
-# What parts to build: An fptools build tree does not have to be built
-# all in one go. By setting the list of ProjectsToBuild in build.mk you can
-# control which projects are built.
-#
-# Caution: the projects are built in the order given here, so if some
-# projects use others you must list them in the correct order.
+# (OPTIONAL) set ProjectsToBuild to a list of projects to be built. If this
+# list is empty, then all projects present in the source tree will be built.
#
-# Generally: * glafp-utils should be first
-# * literate next
-# * happy next
-# * ghc next
-# then it's up to you
+ProjectsToBuild =
-ProjectsToBuild = glafp-utils ghc
#
-# Make a distinction between building and installing
+# set ProjectsDontInstall to a list of projects which are normally built but
+# not installed.
#
-ProjectsToInstall = glafp-utils ghc
+ProjectsDontInstall = glafp-utils nofib
#
# Should the various project tests directories be built?
IncludeTestDirsInBuild=NO
#
-# Name variables for the main project
+# Which ways should SGML documents be built?
+# options are: dvi ps pdf html rtf
#
-Project = Ghc
-ProjectName = $($(Project)ProjectName)
-ProjectNameShort = $($(Project)ProjectNameShort)
-ProjectVersion = $($(Project)ProjectVersion)
-ProjectPatchLevel = $($(Project)ProjectPatchLevel)
+SGMLDocWays=
-#################################################################################
+################################################################################
#
# GHC project
#
# Set of (configurable) options needed by the ghc tree
# plus their default options (if any).
#
-#################################################################################
-
-#
-# Name variables for ghc:
-#
-GhcProjectName = The Glorious Glasgow Haskell Compilation System
-GhcProjectNameShort = ghc
-GhcProjectVersion = 3.00
-GhcProjectPatchLevel = 0
+################################################################################
#---------------------------------------------------------------
#
# Variables that control how the compiler itself is built
-
-# Specify the Haskell compiler to be used to compile the compiler itself
#
-# WithGhcHc Path name of the compiler to use
-#
-# WithGhcHcType What "type" of compiler is being used
-# Valid options:
-# HC_CHALMERS_HBC
-# HC_GLASGOW_GHC
-# HC_ROJEMO_NHC
-# HC_UNSPECIFIED
-
-WithGhcHc = ghc-2.10
+#---------------------------------------------------------------
-# Unused, we think
-# WithGhcHcType=HC_GLASGOW_GHC
+# The compiler used to build GHC is $(GHC). To change the actual compiler
+# used, re-configure with --with-ghc=<path-to-ghc>.
# Extra ways in which to build the compiler (for example, you might want to
# build a profiled compiler so you can see where it spends its time)
# Extra option flags to pass to the compiler that compiles the compiler
# (Ones that are essential are wired into ghc/compiler/Makefile)
-# Typical ones:
-# -H25m allocate a bigger heap (default is 6m)
+# Typical options to use here:
#
-# -O compile an optimised compiler
-# NB! If you add -O you'll almost certainly need to increase
-# the amount of heap space too (to 15m or more)
-#
-# -DDEBUG include consistency/assertion checks in the compiled compiler
+# -DDEBUG include debugging code and assertions (will make the
+# compiler slower and produce debugging output, but useful
+# for development)
#
# -dcore-lint check the types after every pass of the compiler;
-# a pretty strong internal check
-GhcHcOpts=
-
-# GhcWithHscBuiltViaC - build GHC compiler proper (\`hsc') from .hc files?
-GhcWithHscBuiltViaC=NO
-
-# Build hsc with -O and turn optimising flag on when compiling
-# the intermediate C file
-GhcUseGccForOptAsm=YES
-
-# Compile intermediate C file with debugging options set.
-GhcUseGccForDebuggingAsm=YES
-
-# Build a registerised version of hsc and runtime
-# (you'd be desperate or silly not to).
-GhcWithRegisterised=YES
+# a pretty strong internal check of the compiler being
+# used to compile GHC. Useful when bootstrapping.
+GhcHcOpts=-Rghc-timing
+
+# Extra options added to specific stages of the compiler bootstrap.
+# These are placed later on the command line, and may therefore
+# override options from $(GhcHcOpts).
+GhcStage1HcOpts=
+GhcStage2HcOpts=
+GhcStage3HcOpts=
+
+# Build a compiler that will build *unregisterised* libraries and
+# binaries by default. Unregisterised code is supposed to compile and
+# run without any support for architecture-specific assembly mangling,
+# register assignment or tail-calls, and is therefore a good way to get
+# started when porting GHC to new architectures.
+#
+# If this is set to NO, you can still use the unregisterised way
+# (way 'u') to get unregisterised code, but the default way will be
+# registerised.
+#
+# NOTE: this is not the same as building the compiler itself
+# unregisterised. That's done by either (a) bootstrapping with a
+# compiler that was built with GhcUnregisterised=YES, or (b)
+# bootstrapping with a compiler that has way 'u' libraries, and the
+# flag '-unreg' is added to GhcHcOpts above.
+#
+GhcUnregisterised=NO
# Build a compiler with a native code generator backend
# (as well as a C backend)
#
# Target platforms supported:
-# i386, alpha & sparc
-GhcWithNativeCodeGen=$(shell if (test x$(findstring $(HostArch_CPP),i386 alpha sparc) = x); then echo NO; else echo YES; fi)
+# i386, sparc & powerpc
+ifneq "$(findstring $(HostArch_CPP), i386 sparc powerpc)" ""
+GhcWithNativeCodeGen=YES
+else
+GhcWithNativeCodeGen=NO
+endif
+
+# Include support for generating Java
+GhcWithJavaGen=NO
+
+HaveLibDL = @HaveLibDL@
+HaveRtldNext = @HaveRtldNext@
+HaveRtldLocal = @HaveRtldLocal@
+
+# Include GHCi in the compiler. Default to NO for the time being.
+
+ifneq "$(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin)" ""
+GhcWithInterpreter=YES
+else
+GhcWithInterpreter=NO
+endif
#
# Building various ways?
# (right now, empty if not).
BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
-BuildingConcurrent=$(subst mc,YES,$(filter mc,$(WAYS)))
-BuildingProfiling=$(subst p,YES,$(filter p,$(WAYS)))
BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
-BuildingProfilingConcurrent=$(subst mr,YES,$(filter mr,$(WAYS)))
-#---------------------------------------------------------------
-#
-# Variables that control how the prelude libraries and runtime system are built
+#------------------------------------------------------------------------------
+# Options for Libraries
# What extra ways to build the libraries in
# In addition to the normal sequential way, the default is to also build
# profiled prelude libraries.
+# When booting from .hc files, turn this off.
+ifeq "$(BootingFromHc)" "YES"
+GhcLibWays=
+else
GhcLibWays=p
+endif
-# Option flags to pass to GHC when it's compiling prelude modules
-# Typically these are things like -O or -dcore-lint
-# The ones that are *essential* are wired into ghc/lib/Makefile
+# Option flags to pass to GHC when it's compiling modules in
+# fptools/libraries. Typically these are things like -O or
+# -dcore-lint or -H32m. The ones that are *essential* are wired into
+# the build system.
#
# -O is pretty desirable, otherwise no inlining of prelude
# things (incl "+") happens when compiling with this compiler
+GhcLibHcOpts=-O -Rghc-timing
+
+# Win32 only: Enable the RTS and libraries to be built as DLLs
+DLLized=@EnableWin32DLLs@
+
+# Win32 only: are we building a compiler that tries to reduce external
+# dependencies? i.e., one that doesn't assume that the user has got
+# the cygwin toolchain installed on his/her Win32 box.
#
-# Splitting profiled code produces awfully large archives under ELF, so
-# we turn it off here.
+# GHC is still dependent on GNU tools in the backend (gcc to further process
+# .c/.hc/.s/.o files + 'perl' to mangle and split), but using this
+# option a GHC distribution can be put together which includes a minimal
+# set of these open source tools.
#
-# ToDo: track down the source of this.
+MinimalUnixDeps=@MinimalUnixDeps@
+
+# Strip local symbols from libraries? This can make the libraries smaller,
+# but makes debugging somewhat more difficult. Doesn't work with all ld's.
#
-ifeq "$(strip $(way))" "p"
-GhcLibHcOpts= -O
-else
-ifeq "$(strip $(way))" "mr"
-GhcLibHcOpts= -O
-else
-GhcLibHcOpts= -O -split-objs -odir $*
+StripLibraries=NO
+
+
+# ----------------------------------------------------------------------------
+# Object-file splitting
+#
+# Set SplitObjs=YES or NO in your build.mk
+#
+# Don't use -split-objs in in GhcLibHcOpts, because the build
+# system needs to do other special magic if you are
+# doing object-file splitting
+
+# Don't split object files for libs if we're building DLLs, or booting from
+# .hc files.
+SplitObjs=YES
+
+ifeq "$(DLLized)" "YES"
+SplitObjs=NO
+endif
+ifeq "$(BootingFromHc)" "YES"
+SplitObjs=NO
+endif
+ifeq "$(GhcUnregisterised)" "YES"
+SplitObjs=NO
endif
+ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux"
+SplitObjs=NO
endif
-# Build the Haskell Readline bindings?
+# ----------------------------------------------------------------------------
+# Options for GHC's RTS
+
+# This is a good way to set things like -optc-g and -optc-DDEBUG for the RTS.
+# GhcRtsHcOpts is used when compiling .hc files and .c files.
+# GhcRtsCcOpts is used when compiling .c files only.
+
+# For a debugging RTS:
+# GhcRtsHcOpts = -optc-DDEBUG
+# GhcRtsCcOpts = -g
+
+# For an optimised RTS:
+GhcRtsHcOpts=-O2
+GhcRtsCcOpts=-fomit-frame-pointer
+
+# Include the front panel code? Needs GTK+.
+GhcRtsWithFrontPanel = NO
+
+#
+# To have the RTS support interoperation with OS threads, set
+# GhcRtsThreaded to YES (preferably via the --enable-threaded-rts
+# configure script option). The consequence of this is spelled out
+# in details elsewhere, but, briefly, Concurrent Haskell threads
+# can now make external (i.e., C) calls without blocking the progress
+# of other CH threads. Multiple native threads can also execute
+# Haskell code without getting in each others way too.
+#
+GhcRtsThreaded=@ThreadedRts@
+
+################################################################################
#
-GhcLibsWithReadline=NO
+# libraries project
#
+################################################################################
+
+# Build the Haskell Readline bindings?
+#
+GhcLibsWithReadline=@HaveReadlineHeaders@
+
+# Libraries needed for linking with readline
+LibsReadline=@LibsReadline@
+
# Include path to readline.h
# (no path == in standard include path)
#
ReadlineIncludePath=
-# Build the socket libraries? (ToDo: is this used?)
+# Math library
+LIBM=@LIBM@
+
+# Build the ObjectIO ?
#
-GhcLibsWithSockets=YES
+GhcLibsWithObjectIO=@GhcLibsWithObjectIO@
+
+# Build the Haskell OpenGL/GLUT binding?
+#
+GhcLibsWithHOpenGL=@GhcLibsWithHOpenGL@
+GL_CFLAGS=@GL_CFLAGS@
+GL_LIBS=@GL_LIBS@
+GLUT_LIBS=@GLUT_LIBS@
+
+X_CFLAGS=@X_CFLAGS@
+X_LIBS=@X_LIBS@
-# what to include in a binary distribution
-GhcMainDir = ghc
-GhcBinDistDirs = ghc
-GhcBinDistDocs = docs ghc/docs/users_guide ghc/docs/libraries
-GhcBinDistPrlScripts = ghc-$(GhcProjectVersion) stat2resid hstags mkdependHS
-GhcBinDistLibPrlScripts = hscpp
-GhcBinDistBins = hp2ps
+#
+# .NET interop support?
+#
+DotnetSupport=@DotnetSupport@
-#################################################################################
+################################################################################
#
# happy project
#
# Happy specific options
#
-#################################################################################
-
-#
-# Name variables for happy:
-#
-HappyProjectName = Happy
-HappyProjectNameShort = happy
-HappyProjectVersion = 1.5
-HappyProjectPatchLevel = 0
+################################################################################
# The compiler you'd like to use to compile Happy
-WithHappyHc = $(WithGhcHc)
+WithHappyHc = @WithHc@
# HappyHcOpts gives the flags to pass to the Haskell compiler used
# to compile the Happy sources with.
#
-HappyHcOpts =
+HappyHcOpts = -O
-# what to include in a binary distribution
-
-HappyMainDir = happy
-HappyBinDistDirs = happy
-HappyBinDistDocs = happy/doc
-HappyBinDistShScripts = happy
-
-#################################################################################
+################################################################################
#
# haggis project
#
# Haggis specific options
#
-#################################################################################
+################################################################################
-#################################################################################
+################################################################################
#
-# green-card project
+# greencard project
#
-# Green-card specific options
+# GreenCard specific options
#
-#################################################################################
-
+################################################################################
-#################################################################################
+################################################################################
#
# nofib project
#
# nofib specific options
#
-#################################################################################
+################################################################################
+WithNofibHc = $(GHC_INPLACE)
# NoFibSubDirs controls which set of tests should be run
# You can run one or more of
# real
# parallel
# PRIVATE
-# GHC_ONLY
# PENDING
# UNUSED
-NoFibSubDirs = imaginary spectral real GHC_ONLY PRIVATE
+NoFibSubDirs = imaginary spectral real
# The different ways to build nofib. Default is just to mirror
# what is done for the ghc prelude libraries.
#
-NoFibWays=$(GhcLibWays)
+NoFibWays = $(GhcLibWays)
# Haskell compiler options for nofib
-NoFibHcOpts=
+NoFibHcOpts = -O
# ==============================================================================
#
#
# ==============================================================================
-#################################################################################
+################################################################################
#
# Paths (see paths.mk)
#
-#################################################################################
+################################################################################
-TMPDIR = /tmp
+# Directory used by GHC (and possibly other tools) for storing
+# temporary files. If your TMPDIR isn't big enough, either override
+# this in build.mk or set your environment variable "TMPDIR" to point
+# to somewhere with more space. (TMPDIR=. is a good choice).
-# FPTOOLS_TOP: the top of the fptools hierarchy, absolute path.
+# DEFAULT_TMPDIR isn't called TMPDIR because GNU make tends to
+# override an environment variable with the value of the make variable
+# of the same name (if it exists) when executing sub-processes, so
+# setting the TMPDIR env var would have no effect in the build tree.
+DEFAULT_TMPDIR = /tmp
+ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
+DEFAULT_TMPDIR = C:/TEMP
+endif
+ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+DEFAULT_TMPDIR = C:/TEMP
+endif
+
+# FPTOOLS_TOP: the top of the fptools hierarchy, absolute path. (POSIX / unix-style path).
FPTOOLS_TOP_ABS = @hardtop@
+# The platform specific version of 'hardtop'.
+FPTOOLS_TOP_ABS_PLATFORM = @hardtop_plat@
#
# Installation directories, we don't use half of these,
# but since the configure script has them on offer while
# passing through, we might as well set them.
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-bindir = @bindir@
-#UNUSED, see below: libexecdir = @libexecdir@
-datadir = @datadir@
-#sysconfdir = @datadir@
-#sharedstatedir = @sharedstatedir@
-#localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-includedir = @includedir@
-oldincludedir = @oldincludedir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+bindir = @bindir@
+datadir0 = @datadir@
+
+#sysconfdir = @datadir@
+#sharedstatedir = @sharedstatedir@
+#localstatedir = @localstatedir@
+libdir0 = @libdir@
+includedir = @includedir@
+oldincludedir = @oldincludedir@
mandir = @mandir@
+
+#UNUSED:infodir = @infodir@
#UNUSED:srcdir = @srcdir@
+#
+# override libdir and datadir to put project-specific stuff in
+# a subdirectory with the version number included.
+#
+libdir = $(if $(ProjectNameShort),$(libdir0)/$(ProjectNameShort)-$(ProjectVersion),$(libdir0))
+datadir = $(if $(ProjectNameShort),$(datadir0)/$(ProjectNameShort)-$(ProjectVersion),$(datadir0))
+
+# Default place for putting interface files is $(libdir)
+# (overriden for packages in package.mk)
+ifacedir = $(libdir)
+
#
# Default values for most of the above are only set if
# they weren't configured to anything in particular
ifeq "$(strip $(libdir))" ""
libdir = $(exec_prefix)/lib
endif
-ifeq "$(strip $(infodir))" ""
-infodir = $(prefix)/info
-endif
ifeq "$(strip $(includedir))" ""
includedir = $(prefix)/include
endif
ifeq "$(strip $(mandir))" ""
mandir = $(prefix)/man
endif
-
-#################################################################################
+################################################################################
#
# Utilities programs: flags
#
-#################################################################################
+################################################################################
# If you want to give any standard flags to pretty much any utility
# (see utils.mk for a complete list), by adding a line here
#
# SRC_HC_OPTS += -O
+SRC_HC_OPTS += -H16m -O
+
+# These flags make flex 8-bit
+SRC_FLEX_OPTS += -8
+
+SRC_INSTALL_BIN_OPTS += -s
-#################################################################################
+# lint gets all CPP's flags too
+SRC_LINT_OPTS += -axz -DLINT $(SRC_CPP_OPTS)
+WAY$(_way)_LINT_OPTS += WAY$(_way)_CPP_OPTS
+
+# Default fptools options for dllwrap.
+SRC_BLD_DLL_OPTS += -mno-cygwin --target=i386-mingw32
+
+# Flags for CPP when running GreenCard on .pgc files
+GC_CPP_OPTS += -P -E -x c -traditional -D__GLASGOW_HASKELL__
+
+
+################################################################################
#
# Utilities programs: where to find them
#
-#################################################################################
+################################################################################
#-----------------------------------------------------------------------------
# FPtools Utility locations
VERBATIM_PREFIX = $(GLAFP_UTILS)/verbatim/
SGMLVERB_PREFIX = $(GLAFP_UTILS)/sgmlverb/
ETAGS_PREFIX = $(GLAFP_UTILS)/etags/
-MSUB_PREFIX = $(GLAFP_UTILS)/msub/
LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/
MKDIRHIER_PREFIX = $(GLAFP_UTILS)/mkdirhier/
+DOCBOOK_PREFIX = $(GLAFP_UTILS)/docbook/
-# Still used?
-LITERATE = $(FPTOOLS_TOP)/literate
+HADDOCK_PREFIX = $(FPTOOLS_TOP)/haddock/
LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/
-INFO_PREFIX = $(FPTOOLS_TOP)/literate/info-utils/
-TEXI2HTML_PREFIX = $(LITERATE_PREFIX)texi2html/
-
-HAPPY_PREFIX = $(FPTOOLS_TOP)/happy/src/
-GREENCARD_PREFIX = $(FPTOOLS_TOP)/green-card/src/
UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/
-UGEN_PREFIX = $(FPTOOLS_TOP)/ghc/utils/ugen/
-STAT2RESID_PREFIX = $(FPTOOLS_TOP)/ghc/utils/stat2resid/
HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/
-HSCPP_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hscpp/
-HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hstags/
-
+HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hasktags/
+HSC2HS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hsc2hs/
#-----------------------------------------------------------------------------
-# Haskell compiler and mkdependHS
+# Haskell compilers and mkdependHS
+
+# $(GHC), $(HBC) and $(NHC) point to installed versions of the relevant
+# compilers, if available.
+#
+# $(HC) is a generic Haskell 98 compiler, set to $(GHC) by default.
+# $(MKDEPENDHS) is the Haskell dependency generator (ghc -M).
+#
+# NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead
+# (because the version numbers have to be calculated).
+
+GHC = @WithGhc@
+GhcVersion = @GhcVersion@
+GhcMajVersion = @GhcMajVersion@
+GhcMinVersion = @GhcMinVersion@
+GhcPatchLevel = @GhcPatchLevel@
+
+# Canonicalised ghc version number, used for easy (integer) version
+# comparisons. We must expand $(GhcMinVersion) to two digits by
+# adding a leading zero if necessary:
+ifneq "$(findstring $(GhcMinVersion), 0 1 2 3 4 5 6 7 8 9)" ""
+GhcCanonVersion = $(GhcMajVersion)0$(GhcMinVersion)
+else
+GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion)
+endif
+
+HBC = @HBC@
+NHC = @NHC@
-HC = $(FPTOOLS_TOP)/ghc/driver/ghc
-MKDEPENDHS = $(HC)
+HC = @WithHc@
+MKDEPENDHS = $(GHC)
+
+# Sometimes we want to invoke ghc from the build tree in different
+# projects (eg. it's handy to have a nofib & a ghc build in the same
+# tree). We can refer to "this ghc" as $(GHC_INPLACE):
+
+GHC_INPLACE = $(FPTOOLS_TOP)/ghc/compiler/ghc-inplace
+GHC_STAGE1 = $(FPTOOLS_TOP)/ghc/compiler/stage1/ghc-inplace
+GHC_STAGE2 = $(FPTOOLS_TOP)/ghc/compiler/stage2/ghc-inplace
+GHC_STAGE3 = $(FPTOOLS_TOP)/ghc/compiler/stage3/ghc-inplace
#-----------------------------------------------------------------------------
# C compiler
#
-#
+# NB. Don't override $(WhatGccIsCalled) using build.mk, re-configure using
+# the flag --with-gcc=<blah> instead. The reason is that the configure script
+# needs to know which gcc you're using in order to perform its tests.
+
HaveGcc = @HaveGcc@
UseGcc = YES
-WhatGccIsCalled = gcc
+WhatGccIsCalled = @WhatGccIsCalled@
ifeq "$(strip $(HaveGcc))" "YES"
ifneq "$(strip $(UseGcc))" "YES"
CC = cc
endif
endif
+# default C compiler flags
+SRC_CC_OPTS = @SRC_CC_OPTS@
+
+ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux"
+SRC_CC_OPTS += -G0
+endif
+
+# Solaris2 strikes again.
+unix_SRC_HSC2HS_OPTS += @unix_SRC_HSC2HS_OPTS@
+
#-----------------------------------------------------------------------------
-# Flex
+# GMP Library (version 2.0.x or above)
+#
+HaveLibGmp = @HaveLibGmp@
+LibGmp = @LibGmp@
-FLEX = @LEX@
-FLEX_LIB = @LEXLIB@
+#-----------------------------------------------------------------------------
+# Mingwex Library
+#
+HaveLibMingwEx = @HaveLibMingwEx@
+
+#-----------------------------------------------------------------------------
+# HaskellSupport framework (Mac OS X)
+#
+HaveFrameworkHaskellSupport = @HaveFrameworkHaskellSupport@
+
+#-----------------------------------------------------------------------------
+# Regex library
+# (if present in libc use that one, otherwise use the one in the tree)
+#
+HavePosixRegex = @HavePosixRegex@
+
+#-----------------------------------------------------------------------------
+# GTK+
+
+GTK_CONFIG = @GTK_CONFIG@
+GTK_VERSION = @GTK_VERSION@
+
+#-----------------------------------------------------------------------------
+# Flex (currently unused, could be moved to glafp-utils)
+
+# FLEX = @LEX@
+# Don't bother with -lfl, we define our own yywrap()s anyway.
+# FLEX_LIB =
+#WAS:FLEX_LIB = @LEXLIB@
#-----------------------------------------------------------------------------
# Other standard (ha!) Unix utilities
AR = @ArCmd@
+ArSupportsInput = @ArSupportsInput@
# Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
BASH = /usr/local/bin/bash
-#
-# Could be either gzip or compress
-#
-COMPRESS = @CompressCmd@
-COMPRESS_SUFFIX = @CompressSuffix@
CONTEXT_DIFF = @ContextDiffCmd@
CP = cp
-CPP = @RAWCPP@
+CPP = @CPP@ @CPPFLAGS@
CTAGS = $(ETAGS)
-RAWCPP = @RAWCPP@
-GNUCPP = @GNUCPP@
+#
+# RAWCPP_FLAGS are the flags to give to cpp (viz, gcc -E) to persuade it to
+# behave plausibly on Haskell sources.
+#
+RAWCPP_FLAGS = -undef -traditional
+FIND = @FindCmd@
INSTALL = @INSTALL@
#
# Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
#
INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
LATEX = latex
+HEVEA = hevea
+HACHA = hacha
LN_S = @LN_S@
MANMACROS = -man
MSMACROS = -ms
MV = mv
NROFF = nroff
PERL = @PerlCmd@
+PYTHON = @PythonCmd@
PIC = pic
PREPROCESSCMD = $(CC) -E
-PRINTER = lpr
RANLIB = @RANLIB@
RM = rm -f
SED = @SedCmd@
SHELL = /bin/sh
+
+# Some ld's support the -x flag and some don't, so the configure
+# script detects which we have and sets LdXFlag to "-x" or ""
+# respectively.
+LD = @LdCmd@
+LD_X = @LdXFlag@
+
#
# In emergency situations, REAL_SHELL is used to perform shell commands
# from within the ghc driver script, by scribbling the command line to
# We do not use SHELL to execute long commands, as `make' will more than likely
# override whatever setting you have in your environment while executing.
-# By default, REAL_SHELL is set equal SHELL, which is not really a smart move
-# as it SHELL that will show up the bogosity in the first place, but setting
+# By default, REAL_SHELL is set equal to SHELL, which is not really a smart move
+# as it is SHELL that will show up the bogosity in the first place, but setting
# it to anything else isn't really portable.
#
# ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
SIZE = size
STRIP = strip
TAR = @TarCmd@
-
-#
-# Under cygwin32, we have to deal with .exe suffixes
-#
-EXE_SUFFIX=@ExeSuffix@
+ZIP = zip
#
# This is special to literate/, ToDo: add literate-specific
TIME = @TimeCmd@
TROFF = troff
UNAME = uname
-YACC = @YaccCmd@
#-----------------------------------------------------------------------------
-# SGML stuff (currently not configured - we assume you have it)
+# SGML stuff
+
+JADE = @JadeCmd@
+
+SGML2DVI = $(DOCBOOK_PREFIX)db2dvi
+SGML2HTML = $(DOCBOOK_PREFIX)db2html
+SGML2PS = $(DOCBOOK_PREFIX)db2ps
+SGML2PDF = $(DOCBOOK_PREFIX)db2pdf
+SGML2RTF = $(DOCBOOK_PREFIX)db2rtf
+
+SGMLSTYLESHEET = $(FPTOOLS_TOP_ABS)/docs/fptools-both.dsl
+
+SRC_SGML2DVI_OPTS = -d $(SGMLSTYLESHEET)
+SRC_SGML2HTML_OPTS = -d $(SGMLSTYLESHEET)
+SRC_SGML2PS_OPTS = -d $(SGMLSTYLESHEET)
+SRC_SGML2RTF_OPTS = -d $(SGMLSTYLESHEET)
+SRC_SGML2PDF_OPTS = -d $(SGMLSTYLESHEET)
-SGML2LATEX = sgml2latex
-SGML2HTML = sgml2html
-SGML2INFO = sgml2info
-SGML2TXT = sgml2txt
+DOCBOOK_CATALOG = @Catalog@
#-----------------------------------------------------------------------------
# FPtools support software
LTX = $(LTX_PREFIX)ltx
MKDIRHIER = $(MKDIRHIER_PREFIX)mkdirhier
LNDIR = $(LNDIR_PREFIX)lndir
-MSUB = $(MSUB_PREFIX)msub
ETAGS = $(ETAGS_PREFIX)etags
VERBATIM = $(VERBATIM_PREFIX)verbatim
SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb
-SGML2LATEX = sgml2latex
RUNTEST = $(RUNTEST_PREFIX)runstdtest
+LX = @LxCmd@
+
+BLD_DLL = dllwrap
+
+#
+# .NET support software
+#
+ILX2IL = ilx2il
+ILASM = ilasm
+
+#
+# ghc-pkg
+#
+GHC_PKG = @GhcPkgCmd@
+
+#
+# GreenCard
+#
+GREENCARD = @GreenCardCmd@
+GREENCARD_VERSION = @GreenCardVersion@
+
+#
+# Happy
+#
HAPPY = @HappyCmd@
HAPPY_VERSION = @HappyVersion@
-LX = @LxCmd@
-GREENCARD = @GreencardCmd@
+#
+# Options to pass to Happy when we're going to compile the output with GHC
+#
+GHC_HAPPY_OPTS = -agc
+
+#
+# Alex
+#
+ALEX = @AlexCmd@
+ALEX_VERSION = @AlexVersion@
+#
+# Options to pass to Happy when we're going to compile the output with GHC
+#
+GHC_ALEX_OPTS = -g
+
+#
+# Haddock
+#
+HADDOCK = @HaddockCmd@
+HADDOCK_INPLACE = $(HADDOCK_PREFIX)/src/haddock-inplace
#
# Stuff from fptools/literate
#
-INFO = $(UTIL_PREFIX)info
-MAKEINFO = $(INFO_PREFIX)makeinfo
-POSTMAKEINFO = $(INFO_PREFIX)postmakeinfo
LIT2PGM = $(LITERATE_PREFIX)lit2pgm
-LIT2TEXI = $(LITERATE_PREFIX)lit2texi
LIT2HTML = $(LITERATE_PREFIX)lit2html
LIT2LATEX = $(LITERATE_PREFIX)lit2latex
MKDEPENDLIT = $(LITERATE_PREFIX)mkdependlit
LIT2CHANGELOG = $(LITERATE_PREFIX)lit2changelog
LIT2TEXT = $(LITERATE_PREFIX)lit2text
-TEXI2HTML = $(TEXI2HTML_PREFIX)texi2html
#
# Stuff from fptools/ghc/utils
#
-UNLIT = $(UNLIT_PREFIX)unlit
-UGEN = $(UGEN_PREFIX)ugen
-STAT2RESID = $(STAT2RESID_PREFIX)stat2resid
-HP2PS = $(HP2PS_PREFIX)hp2ps
-HSCPP = $(HSCPP_PREFIX)hscpp
-HSTAGS = $(HSTAGS_PREFIX)hstags
+UNLIT = $(UNLIT_PREFIX)unlit$(exeext)
+HP2PS = $(HP2PS_PREFIX)hp2ps$(exeext)
+HSTAGS = $(HSTAGS_PREFIX)hasktags
+HSC2HS = $(HSC2HS_PREFIX)hsc2hs-inplace
#
# Options for the compiling different `ways'. Various projects within
#
# The ways currently defined.
#
-ALL_WAYS=p t u mc mr mt mp mg 1s 2s du a b c d e f g h i j k l m n o A B
+ALL_WAYS=p t u s mp mg a b c d e f g h i j k l m n o A B
+USER_WAYS=a b c d e f g h j k l m n o A B
#
-# The following ways currently have treated specially, p u t mc mt my mp mg 1s 2d du,
+# The following ways currently have treated specially, p u t mg,
# as the driver script treats these guys specially and needs to carefully be told
# about the options for these. Hence, we hide the required command line options
# for these in the ghc/driver, as this is the only place they are needed.
#
# If you want to add to these default options, fill in the variables below:
-#
+
+# Way 'i':
+WAY_i_NAME=ILX
+WAY_i_HC_OPTS= -filx -fruntime-types
+
+# Way 'p':
WAY_p_NAME=profiling
WAY_p_HC_OPTS= -prof
-# Way t:
+# Way 't':
WAY_t_NAME=ticky-ticky profiling
WAY_t_HC_OPTS= -ticky
# Way `u':
WAY_u_NAME=unregisterized (using portable C only)
-WAY_u_HC_OPTS=
+WAY_u_HC_OPTS=-unreg
-# Way `mc': concurrent
-WAY_mc_NAME=concurrent
-WAY_mc_HC_OPTS=-concurrent
-
-# Way `mr':
-WAY_mr_NAME=profiled concurrent
-WAY_mr_HC_OPTS=-prof -concurrent
-
-# Way `mt':
-WAY_mt_NAME=ticky-ticky concurrent
-WAY_mt_HC_OPTS=-ticky -concurrent
+# Way `s':
+WAY_s_NAME=threads (for SMP)
+WAY_s_HC_OPTS=-smp
# Way `mp':
WAY_mp_NAME=parallel
WAY_mp_HC_OPTS=-parallel
-#
# Way `mg':
-#
WAY_mg_NAME=GranSim
WAY_mg_HC_OPTS=-gransim
#
-# Ways for different garbage collectors
-#
-WAY_2s_NAME=2-space GC
-WAY_2s_HC_OPTS=-2s
-
-WAY_1s_NAME=1-space GC
-WAY_1s_HC_OPTS=-1s
-
-WAY_du_NAME=dual-mode GC
-WAY_du_HC_OPTS=-du
-
-#
# Add user-way configurations here:
#
WAY_A_NAME=
WAY_h_NAME=
WAY_h_HC_OPTS=
-WAY_i_NAME=
-WAY_i_HC_OPTS=
-
WAY_j_NAME=
WAY_j_HC_OPTS=
WAY_o_NAME=
WAY_o_HC_OPTS=
+
+################################################################################
+#
+# 31-bit-Int Core files
+#
+################################################################################
+
+#
+# It is possible to configure the compiler and prelude to support 31-bit
+# integers, suitable for a back-end and RTS using a tag bit on a 32-bit
+# architecture. Currently the only useful output from this option is external Core
+# files. The following additions to your build.mk will produce the
+# 31-bit core output. Note that this is *not* just a library "way"; the
+# compiler must be built a special way too.
+
+# GhcCppOpts +=-DWORD_SIZE_IN_BITS=31
+# GhcLibHcOpts +=-fext-core -fno-code -DWORD_SIZE_IN_BITS=31
+# GhcLibCppOpts += -DWORD_SIZE_IN_BITS=31
+# SplitObjs=NO
+
projects / ghc-hetmet.git / blobdiff