#
# This is one of only two files that configure generates (the other is config.h)
#
-# There is a section below for each project within the fptools suite
+
+ifneq "$(findstring 3.7, $(MAKE_VERSION))" ""
+ifeq "$(findstring 3.79.1, $(MAKE_VERSION))" ""
+$(error GNU make version 3.79.1 or later is required.)
+endif
+endif
+
+################################################################################
#
-# PLUS
+# GHC Version
#
-# a section corresponding to each of the main .mk files
-# included by boilerplate.mk (see boilerplate.mk for a list).
+# ProjectVersion is treated as a *string*
+# ProjectVersionInt is treated as an *integer* (for cpp defines)
+
+# Versioning scheme: A.B.C
+# A: major version, decimal, any number of digits
+# B: minor version, decimal, any number of digits
+# C: patchlevel, one digit, omitted if zero.
+#
+# ProjectVersionInt does *not* contain the patchlevel (rationale: this
+# figure is used for conditional compilations, and library interfaces
+# etc. are not supposed to change between patchlevels).
+#
+# The ProjectVersionInt is included in interface files, and GHC
+# checks that it's reading interface generated by the same ProjectVersion
+# as itself. It does this even though interface file syntax may not
+# change between versions. Rationale: calling conventions or other
+# random .o-file stuff might change even if the .hi syntax doesn't
+
+ProjectName = @ProjectName@
+ProjectVersion = @ProjectVersion@
+ProjectVersionInt = @ProjectVersionInt@
+ProjectPatchLevel = @ProjectPatchLevel@
################################################################################
#
-# Project-wide platform variables
+# Platform variables
#
################################################################################
# will be built as HC files for the target system, and likely won't
# build on this host platform.
#
+# An important invariant is that for any piece of source code, the
+# platform on which the code is going to run is the HOST platform,
+# and the platform on which we are building is the BUILD platform.
+# Additionally for the compiler, the platform this compiler will
+# generate code for is the TARGET. TARGET is not meaningful outside
+# the compiler sources.
+#
# Guidelines for when to use HOST vs. TARGET:
#
# - In the build system (Makefile, foo.mk), normally we should test
#
# - In the compiler itself, we should test HOST or TARGET depending
# on whether the conditional relates to the code being generated, or
-# the platform on which the compiler is running. For stage 2,
-# HOSTPLATFORM should be reset to be TARGETPLATFORM (we currently
-# don't do this, but we should).
+# the platform on which the compiler is running. See the section
+# on "Coding Style" in the commentary for more details.
#
-# - In the RTS and library code, we should be testing TARGET only.
+# - In all other code, we should be testing HOST only.
#
# NOTE: cross-compiling is not well supported by the build system.
# You have to do a lot of work by hand to cross compile: see the
@TargetVendor_CPP@_TARGET_VENDOR = 1
@BuildVendor_CPP@_BUILD_VENDOR = 1
+################################################################################
+#
+# Global configuration options
+#
+################################################################################
+
# Leading underscores on symbol names in object files
# Valid options: YES/NO
#
Windows=NO
endif
-################################################################################
-#
-# project-wide flags
-#
-# Set of options applicable to all fptools projects
-#
-################################################################################
-
# BootingFromHc - build GHC and the libraries from .hc files?
BootingFromHc = @BootingFromHc@
# rather than registerised code, i.e., disable the mangler?
BootingFromUnregisterisedHc = @BootingFromUnregisterisedHc@
-# Build Order: we build Happy, Haddock and Alex before GHC if they are
-# in this source tree, just in case our GHC build depends on these
-# local builds rather than installed versions of the tools.
-#
-# Build the libs first if we're bootstrapping from .hc files.
-ifeq "$(BootingFromHc)" "YES"
-AllProjects = glafp-utils happy alex haddock libraries hslibs ghc greencard hdirect hood nofib docs
-else
-AllProjects = glafp-utils happy alex haddock ghc libraries hslibs greencard hdirect hood nofib docs
-endif
-
-#
-# (OPTIONAL) set ProjectsToBuild to a list of projects to be built. If this
-# list is empty, then all projects present in the source tree will be built.
-#
-ProjectsToBuild =
-
-#
-# set ProjectsDontInstall to a list of projects which are normally built but
-# not installed.
-#
-ProjectsDontInstall = glafp-utils nofib
-
-#
-# Should the various project tests directories be built?
-#
-IncludeTestDirsInBuild=NO
-
-#
-# Should the various project example directories be built?
-#
-IncludeExampleDirsInBuild=NO
-
-#
-# Which ways should SGML documents be built?
-# options are: dvi ps pdf html rtf
-#
-SGMLDocWays=
-
#
# Which ways should DocBook XML documents be built?
-# options are: dvi ps pdf html
+# options are: dvi ps pdf html chm HxS
#
XMLDocWays=
################################################################################
#
-# GHC project
-#
-# Set of (configurable) options needed by the ghc tree
-# plus their default options (if any).
-#
-################################################################################
-
-#---------------------------------------------------------------
-#
# Variables that control how the compiler itself is built
#
-#---------------------------------------------------------------
+################################################################################
# The compiler used to build GHC is $(GHC). To change the actual compiler
# used, re-configure with --with-ghc=<path-to-ghc>.
GhcCompilerWays=
# Extra option flags to pass to the compiler that compiles the compiler
-# (Ones that are essential are wired into ghc/compiler/Makefile)
+# (Ones that are essential are wired into compiler/Makefile)
# Typical options to use here:
#
# -DDEBUG include debugging code and assertions (will make the
# the compiler you build with is generating registerised binaries), but
# the stage2 compiler will be an unregisterised binary.
#
+ifneq "$(findstring $(HostArch_CPP), alpha hppa)" ""
+GhcUnregisterised=YES
+else
GhcUnregisterised=NO
+endif
# Build a compiler with a native code generator backend
# (as well as a C backend)
#
# Target platforms supported:
-# i386, sparc & powerpc
-ifneq "$(findstring $(HostArch_CPP), i386 sparc powerpc)" ""
+# i386, powerpc
+# sparc has bitrotted
+# AIX is not supported
+ArchSupportsNCG=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc)))
+OsSupportsNCG=$(strip $(patsubst $(HostOS_CPP), YES, $(patsubst aix,,$(HostOS_CPP))))
+
+ifeq "$(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)" "YESYESNO"
GhcWithNativeCodeGen=YES
else
GhcWithNativeCodeGen=NO
GhcWithJavaGen=NO
HaveLibDL = @HaveLibDL@
-HaveRtldNext = @HaveRtldNext@
-HaveRtldLocal = @HaveRtldLocal@
-# Include GHCi in the compiler. Default to NO for the time being.
+# ArchSupportsSMP should be set iff there is support for that arch in
+# includes/SMP.h
+ArchSupportsSMP=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 sparc powerpc)))
-ifneq "$(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin)" ""
+ifeq "$(ArchSupportsSMP)$(GhcUnregisterised)" "YESNO"
+GhcWithSMP=YES
+else
+GhcWithSMP=NO
+endif
+
+# Whether to include GHCi in the compiler. Depends on whether the RTS linker
+# has support for this OS/ARCH combination.
+
+OsSupportsGHCi=$(strip $(patsubst $(HostOS_CPP), YES, $(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin)))
+ArchSupportsGHCi=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc sparc64)))
+
+ifeq "$(OsSupportsGHCi)$(ArchSupportsGHCi)" "YESYES"
GhcWithInterpreter=YES
else
GhcWithInterpreter=NO
endif
+# GhcEnableTablesNextToCode tells us whether the target architecture
+# supports placing info tables directly before the entry code
+# (see TABLES_NEXT_TO_CODE in the RTS). Whether we actually compile for
+# TABLES_NEXT_TO_CODE depends on whether we're building unregisterised
+# code or not, which may be decided by options to the compiler later.
+ifneq "$(findstring $(TargetArch_CPP)X, ia64X powerpc64X)" ""
+GhcEnableTablesNextToCode=NO
+else
+GhcEnableTablesNextToCode=YES
+endif
+
#
# Building various ways?
# (right now, empty if not).
BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
+# Interface file version (hi-boot files only)
+#
+# A GHC built with HscIfaceFileVersion=n will look for
+# M.hi-boot-n, and only then for
+# M.hi-boot.
+# (It'll be happy with the latter if the former doesn't exist.)
+#
+#
+# This variable is used ONLY for hi-boot files. Its only purpose is
+# to allow you to have a single directory with multiple .hi-boot files
+# for the same module, each corresponding to a different version of
+# GHC.
+#
+# HscIfaceFileVersion is propagated to hsc via
+# compiler/main/Config.hs, which is automatically generated by
+# compiler/Makefile.
+
+HscIfaceFileVersion=6
+
+# Building with debugger?
+GhciWithDebugger=YES
+
#------------------------------------------------------------------------------
# Options for Libraries
# thr_p : threaded profiled
# debug : debugging (compile with -g for the C compiler, and -DDEBUG)
# debug_p : debugging profiled
+# debug_u : debugging unregisterised
# thr_debug : debugging threaded
# thr_debug_p : debugging threaded profiled
#
ifeq "$(BootingFromHc)" "YES"
GhcRTSWays=
else
-GhcRTSWays=thr thr_p debug
+GhcRTSWays=thr thr_p debug thr_debug
endif
# Option flags to pass to GHC when it's compiling modules in
#
# -O is pretty desirable, otherwise no inlining of prelude
# things (incl "+") happens when compiling with this compiler
+#
+# -fgenerics switches on generation of support code for
+# derivable type classes. This is now off by default,
+# but we switch it on for the libraries so that we generate
+# the code in case someone importing wants it
-GhcLibHcOpts=-O -Rghc-timing
+GhcLibHcOpts=-O -Rghc-timing -fgenerics
# Win32 only: Enable the RTS and libraries to be built as DLLs
DLLized=@EnableWin32DLLs@
-# Win32 only: are we building a compiler that tries to reduce external
-# dependencies? i.e., one that doesn't assume that the user has got
-# the cygwin toolchain installed on his/her Win32 box.
-#
-# GHC is still dependent on GNU tools in the backend (gcc to further process
-# .c/.hc/.s/.o files + 'perl' to mangle and split), but using this
-# option a GHC distribution can be put together which includes a minimal
-# set of these open source tools.
-#
-MinimalUnixDeps=@MinimalUnixDeps@
-
# Strip local symbols from libraries? This can make the libraries smaller,
# but makes debugging somewhat more difficult. Doesn't work with all ld's.
#
StripLibraries=NO
+# These are the URL patterns that Haddock uses to generate the "Source
+# File" links on each page.
+CorePackageSourceURL = http://darcs.haskell.org/ghc-6.6/packages/$(PACKAGE)/%{FILE}
+ExtraPackageSourceURL = http://darcs.haskell.org/packages/$(PACKAGE)/%{FILE}
+
+# These are the packages required to be present in order to bootstrap GHC
+# NB. must be synced with libraries/core-packages
+CorePackages = base Cabal haskell98 readline regex-base regex-compat \
+ regex-posix parsec stm template-haskell unix Win32
# ----------------------------------------------------------------------------
# Object-file splitting
# Don't use -split-objs in in GhcLibHcOpts, because the build
# system needs to do other special magic if you are
# doing object-file splitting
+ifneq "$(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc)" ""
+SplitObjs=YES
+else
+SplitObjs=NO
+endif
# Don't split object files for libs if we're building DLLs, or booting from
# .hc files.
-SplitObjs=YES
-
ifeq "$(DLLized)" "YES"
SplitObjs=NO
endif
ifeq "$(GhcUnregisterised)" "YES"
SplitObjs=NO
endif
-ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux"
+ifeq "$(TargetArch_CPP)" "ia64"
SplitObjs=NO
endif
-# ----------------------------------------------------------------------------
-# Options for GHC's RTS
-
-# For an optimised RTS (you probably don't want to change these; we build
-# a debugging RTS by default now. Use -package rts_debug to get it).
-GhcRtsHcOpts=-O2
-GhcRtsCcOpts=-fomit-frame-pointer
-
-# Include the front panel code? Needs GTK+.
-GhcRtsWithFrontPanel = NO
-
-################################################################################
-#
-# libraries project
-#
-################################################################################
-
-# Build the Haskell Readline bindings?
-#
-GhcLibsWithReadline=@GhcLibsWithReadline@
-
-# Libraries needed for linking with readline
-LibsReadline=@LibsReadline@
-
-# Include path to readline.h
-# (no path == in standard include path)
-#
-ReadlineIncludePath=
-
# Math library
LIBM=@LIBM@
#
GhcLibsWithObjectIO=@GhcLibsWithObjectIO@
-# Build the Haskell OpenGL binding?
-#
-GhcLibsWithOpenGL=@GhcLibsWithOpenGL@
-GLU_CFLAGS=@GLU_CFLAGS@
-GLU_LIBS=@GLU_LIBS@
-
-# Build the Haskell OpenAL binding?
-#
-GhcLibsWithOpenAL=@GhcLibsWithOpenAL@
-
-# Build the Haskell GLUT binding?
-#
-GhcLibsWithGLUT=@GhcLibsWithGLUT@
-GLUT_LIBS=@GLUT_LIBS@
-
-# X11 stuff
-#
-GhcLibsWithX11=@GhcLibsWithX11@
-X_CFLAGS=@X_CFLAGS@
-X_LIBS=@X_LIBS@
-
# .NET interop support?
#
DotnetSupport=@DotnetSupport@
#
GhcLibsWithUnix=@GhcLibsWithUnix@
-################################################################################
-#
-# happy project
-#
-# Happy specific options
-#
-################################################################################
-
-# The compiler you'd like to use to compile Happy
-WithHappyHc = @WithHc@
+# ----------------------------------------------------------------------------
+# Options for GHC's RTS
-# HappyHcOpts gives the flags to pass to the Haskell compiler used
-# to compile the Happy sources with.
-#
-HappyHcOpts = -O
+# For an optimised RTS (you probably don't want to change these; we build
+# a debugging RTS by default now. Use -debug to get it).
+GhcRtsHcOpts=-optc-O2
+GhcRtsCcOpts=-fomit-frame-pointer
-################################################################################
-#
-# haggis project
-#
-# Haggis specific options
-#
-################################################################################
+# Include the front panel code? Needs GTK+.
+GhcRtsWithFrontPanel = NO
-################################################################################
-#
-# greencard project
-#
-# GreenCard specific options
-#
-################################################################################
+# Include support for CPU performance counters via the PAPI library in the RTS?
+# (PAPI: http://icl.cs.utk.edu/papi/)
+GhcRtsWithPapi = NO
+HavePapi = @HavePapi@
################################################################################
#
-# nofib project
+# nofib
#
# nofib specific options
#
# Haskell compiler options for nofib
NoFibHcOpts = -O
-# ==============================================================================
-#
-# END OF PROJECT-SPECIFIC STUFF
-#
-# Now come the generic configuration options
-#
-# ==============================================================================
+# Number of times to run each program
+NoFibRuns = 5
################################################################################
#
DEFAULT_TMPDIR = /tmp
ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
-DEFAULT_TMPDIR = C:/TEMP
+DEFAULT_TMPDIR = /C/TEMP
endif
ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
-DEFAULT_TMPDIR = C:/TEMP
+DEFAULT_TMPDIR = /C/TEMP
endif
# FPTOOLS_TOP: the top of the fptools hierarchy, absolute path. (POSIX / unix-style path).
# passing through, we might as well set them.
prefix = @prefix@
+datarootdir = @datarootdir@
exec_prefix = @exec_prefix@
bindir = @bindir@
datadir0 = @datadir@
ifeq "$(Windows)" "YES"
ifeq "$(strip $(prefix))" ""
-prefix = c:/ghc
+prefix = /c/ghc
endif
# Hack: our directory layouts tend to be different on Windows, so
else
#
-# Unix: override libdir and datadir to put project-specific stuff in
+# Unix: override libdir and datadir to put ghc-specific stuff in
# a subdirectory with the version number included.
#
-libdir = $(if $(ProjectNameShort),$(libdir0)/$(ProjectNameShort)-$(ProjectVersion),$(libdir0))
-datadir = $(if $(ProjectNameShort),$(datadir0)/$(ProjectNameShort)-$(ProjectVersion),$(datadir0))
+libdir = $(libdir0)/ghc-$(ProjectVersion)
+datadir = $(datadir0)/ghc-$(ProjectVersion)
endif # Windows
INSTALL_SCRIPT = $(INSTALL) -m 755
INSTALL_SHLIB = $(INSTALL) -m 755
INSTALL_DATA = $(INSTALL) -m 644
+INSTALL_MAN = $(INSTALL) -m 644
INSTALL_DIR = $(MKDIRHIER)
# -----------------------------------------------------------------------------
################################################################################
#
-# Utilities programs: where to find them
+# Layout of the source tree
#
################################################################################
-#-----------------------------------------------------------------------------
-# FPtools Utility locations
-
-# By default, the various utils needed to be build ghc and chums
-# is set up to point to the utils/ directory. Define here the
-# path prefix for the utilities. Notice that it's a prefix with
-# a trailing slash, so that it can be concatenated directly on
-# front of a program name; if it's not set then we just look
-# along the shell's $(PATH)
-#
-# If instead you want to use installed or your own versions of these,
-# override the various *_PREFIX in build.mk, i.e., having the following
-# in build.mk:
-#
-# MKDEPENDC_PREFIX=
-#
-# will force `make' to rummage around in your PATH to find `mkdependC' (not
-# sure it would need it in the first place, but still).
-#
-GLAFP_UTILS = $(FPTOOLS_TOP)/glafp-utils
+# Here we provide defines for the various directories in the source tree,
+# so we can move things around more easily. A define $(GHC_FOO_DIR_REL)
+# indicates a directory relative to the top of the source tree, whereas
+# $(GHC_FOO_DIR) is a directory relative to the current directory.
+# $(GHC_FOO_DIR_ABS) is the absolute path to the directory.
+
+GHC_UTILS_DIR_REL = utils
+GHC_INCLUDE_DIR_REL = includes
+GHC_COMPILER_DIR_REL = compiler
+GHC_RTS_DIR_REL = rts
+GHC_UTILS_DIR_REL = utils
+GHC_DRIVER_DIR_REL = driver
+GHC_COMPAT_DIR_REL = compat
+
+GHC_MKDEPENDC_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdependC
+GHC_LTX_DIR_REL = $(GHC_UTILS_DIR_REL)/ltx
+GHC_RUNTEST_DIR_REL = $(GHC_UTILS_DIR_REL)/runstdtest
+GHC_LNDIR_DIR_REL = $(GHC_UTILS_DIR_REL)/lndir
+GHC_MKDIRHIER_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdirhier
+GHC_DOCBOOK_DIR_REL = $(GHC_UTILS_DIR_REL)/docbook
+GHC_UNLIT_DIR_REL = $(GHC_UTILS_DIR_REL)/unlit
+GHC_HP2PS_DIR_REL = $(GHC_UTILS_DIR_REL)/hp2ps
+GHC_HSTAGS_DIR_REL = $(GHC_UTILS_DIR_REL)/hasktags
+GHC_HSC2HS_DIR_REL = $(GHC_UTILS_DIR_REL)/hsc2hs
+GHC_TOUCHY_DIR_REL = $(GHC_UTILS_DIR_REL)/touchy
+GHC_PKG_DIR_REL = $(GHC_UTILS_DIR_REL)/ghc-pkg
+GHC_GENPRIMOP_DIR_REL = $(GHC_UTILS_DIR_REL)/genprimopcode
+GHC_GENAPPLY_DIR_REL = $(GHC_UTILS_DIR_REL)/genapply
+
+GHC_MANGLER_DIR_REL = $(GHC_DRIVER_DIR_REL)/mangler
+GHC_SPLIT_DIR_REL = $(GHC_DRIVER_DIR_REL)/split
+GHC_SYSMAN_DIR_REL = $(GHC_RTS_DIR_REL)/parallel
+
+GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL)
+GHC_INCLUDE_DIR = $(FPTOOLS_TOP)/$(GHC_INCLUDE_DIR_REL)
+GHC_COMPILER_DIR = $(FPTOOLS_TOP)/$(GHC_COMPILER_DIR_REL)
+GHC_RTS_DIR = $(FPTOOLS_TOP)/$(GHC_RTS_DIR_REL)
+GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL)
+GHC_DRIVER_DIR = $(FPTOOLS_TOP)/$(GHC_DRIVER_DIR_REL)
+GHC_COMPAT_DIR = $(FPTOOLS_TOP)/$(GHC_COMPAT_DIR_REL)
+
+GHC_MKDEPENDC_DIR = $(FPTOOLS_TOP)/$(GHC_MKDEPENDC_DIR_REL)
+GHC_LTX_DIR = $(FPTOOLS_TOP)/$(GHC_LTX_DIR_REL)
+GHC_RUNTEST_DIR = $(FPTOOLS_TOP)/$(GHC_RUNTEST_DIR_REL)
+GHC_LNDIR_DIR = $(FPTOOLS_TOP)/$(GHC_LNDIR_DIR_REL)
+GHC_MKDIRHIER_DIR = $(FPTOOLS_TOP)/$(GHC_MKDIRHIER_DIR_REL)
+GHC_DOCBOOK_DIR = $(FPTOOLS_TOP)/$(GHC_DOCBOOK_DIR_REL)
+GHC_UNLIT_DIR = $(FPTOOLS_TOP)/$(GHC_UNLIT_DIR_REL)
+GHC_HP2PS_DIR = $(FPTOOLS_TOP)/$(GHC_HP2PS_DIR_REL)
+GHC_HSTAGS_DIR = $(FPTOOLS_TOP)/$(GHC_HSTAGS_DIR_REL)
+GHC_HSC2HS_DIR = $(FPTOOLS_TOP)/$(GHC_HSC2HS_DIR_REL)
+GHC_TOUCHY_DIR = $(FPTOOLS_TOP)/$(GHC_TOUCHY_DIR_REL)
+GHC_PKG_DIR = $(FPTOOLS_TOP)/$(GHC_PKG_DIR_REL)
+GHC_GENPRIMOP_DIR = $(FPTOOLS_TOP)/$(GHC_GENPRIMOP_DIR_REL)
+GHC_GENAPPLY_DIR = $(FPTOOLS_TOP)/$(GHC_GENAPPLY_DIR_REL)
+
+GHC_MANGLER_DIR = $(FPTOOLS_TOP)/$(GHC_MANGLER_DIR_REL)
+GHC_SPLIT_DIR = $(FPTOOLS_TOP)/$(GHC_SPLIT_DIR_REL)
+GHC_SYSMAN_DIR = $(FPTOOLS_TOP)/$(GHC_SYSMAN_DIR_REL)
+
+GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL)
+GHC_INCLUDE_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_INCLUDE_DIR_REL)
+GHC_COMPILER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPILER_DIR_REL)
+GHC_RTS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RTS_DIR_REL)
+GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL)
+GHC_DRIVER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DRIVER_DIR_REL)
+GHC_COMPAT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPAT_DIR_REL)
+
+GHC_MKDEPENDC_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDEPENDC_DIR_REL)
+GHC_LTX_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LTX_DIR_REL)
+GHC_RUNTEST_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RUNTEST_DIR_REL)
+GHC_LNDIR_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LNDIR_DIR_REL)
+GHC_MKDIRHIER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDIRHIER_DIR_REL)
+GHC_DOCBOOK_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DOCBOOK_DIR_REL)
+GHC_UNLIT_DIR = $(FPTOOLS_TOP_ABS)/$(GHC_UNLIT_DIR_REL)
+GHC_HP2PS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HP2PS_DIR_REL)
+GHC_HSTAGS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSTAGS_DIR_REL)
+GHC_HSC2HS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSC2HS_DIR_REL)
+GHC_TOUCHY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_TOUCHY_DIR_REL)
+GHC_PKG_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_PKG_DIR_REL)
+GHC_GENPRIMOP_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENPRIMOP_DIR_REL)
+GHC_GENAPPLY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENAPPLY_DIR_REL)
+
+GHC_MANGLER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MANGLER_DIR_REL)
+GHC_SYSMAN_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SYSMAN_DIR_REL)
+GHC_SPLIT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SPLIT_DIR_REL)
-SCRIPT_PREFIX = $(GLAFP_UTILS)/scripts/
-MKDEPENDC_PREFIX = $(GLAFP_UTILS)/mkdependC/
-LTX_PREFIX = $(GLAFP_UTILS)/ltx/
-RUNTEST_PREFIX = $(GLAFP_UTILS)/runstdtest/
-VERBATIM_PREFIX = $(GLAFP_UTILS)/verbatim/
-SGMLVERB_PREFIX = $(GLAFP_UTILS)/sgmlverb/
-ETAGS_PREFIX = $(GLAFP_UTILS)/etags/
-LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/
-MKDIRHIER_PREFIX = $(GLAFP_UTILS)/mkdirhier/
-DOCBOOK_PREFIX = $(GLAFP_UTILS)/docbook/
-
-HADDOCK_PREFIX = $(FPTOOLS_TOP)/haddock/
+# -----------------------------------------------------------------------------
+# Names of programs in the GHC tree
+#
+# xxx_PGM the name of an executable, without the path
+# xxx the executable relative to the current dir
+
+GHC_UNLIT_PGM = unlit$(exeext)
+GHC_HP2PS_PGM = hp2ps
+GHC_HSTAGS_PGM = hasktags
+GHC_HSC2HS_INPLACE_PGM = hsc2hs-inplace
+GHC_TOUCHY_PGM = touchy$(exeext)
+GHC_MANGLER_PGM = ghc-asm
+GHC_SPLIT_PGM = ghc-split
+GHC_SYSMAN_PGM = SysMan
+GHC_PKG_INPLACE_PGM = ghc-pkg-inplace
+GHC_GENPRIMOP_PGM = genprimopcode
+GHC_GENAPPLY_PGM = genapply
+GHC_MKDEPENDC_PGM = mkdependC
+GHC_LTX_PGM = ltx
+GHC_MKDIRHIER_PGM = mkdirhier
+GHC_LNDIR_PGM = lndir
+GHC_RUNTEST_PGM = runstdtest
-LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/
+ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+GHC_CP = "xcopy /y"
+GHC_PERL = perl
+else
+GHC_CP = $(CP)
+GHC_PERL = $(PERL)
+endif
-UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/
-HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/
-HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hasktags/
-HSC2HS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hsc2hs/
+UNLIT = $(GHC_UNLIT_DIR)/$(GHC_UNLIT_PGM)
+HP2PS = $(GHC_HP2PS_DIR)/$(GHC_HP2PS_PGM)
+HSTAGS = $(GHC_HSTAGS_DIR)/$(GHC_HSTAGS_PGM)
+HSC2HS_INPLACE = $(GHC_HSC2HS_DIR)/$(GHC_HSC2HS_INPLACE_PGM)
+MANGLER = $(GHC_MANGLER_DIR)/$(GHC_MANGLER_PGM)
+SPLIT = $(GHC_SPLIT_DIR)/$(GHC_SPLIT_PGM)
+SYSMAN = $(GHC_SYSMAN_DIR)/$(GHC_SYSMAN_PGM)
+GHC_PKG_INPLACE = $(GHC_PKG_DIR)/$(GHC_PKG_INPLACE_PGM)
+GENPRIMOP = $(GHC_GENPRIMOP_DIR)/$(GHC_GENPRIMOP_PGM)
+GENAPPLY = $(GHC_GENAPPLY_DIR)/$(GHC_GENAPPLY_PGM)
+MKDEPENDC = $(GHC_MKDEPENDC_DIR)/$(GHC_MKDEPENDC_PGM)
+LTX = $(GHC_LTX_DIR)/$(GHC_LTX_PGM)
+MKDIRHIER = $(GHC_MKDIRHIER_DIR)/$(GHC_MKDIRHIER_PGM)
+LNDIR = $(GHC_LNDIR_DIR)/$(GHC_LNDIR_PGM)
+RUNTEST = $(GHC_RUNTEST_DIR)/$(GHC_RUNTEST_PGM)
#-----------------------------------------------------------------------------
# Haskell compilers and mkdependHS
GHC = @WithGhc@
GhcDir = $(dir $(GHC))
-GhcVersion = @GhcVersion@
+
+# Set to YES if $(GHC) has the readline package installed
+GhcHasReadline = @GhcHasReadline@
+
+HBC = @HBC@
+NHC = @NHC@
+
+# Sometimes we want to invoke ghc from the build tree in different
+# places (eg. it's handy to have a nofib & a ghc build in the same
+# tree). We can refer to "this ghc" as $(GHC_INPLACE):
+
+GHC_INPLACE = $(GHC_COMPILER_DIR)/ghc-inplace
+GHC_STAGE1 = $(GHC_COMPILER_DIR)/stage1/ghc-inplace
+GHC_STAGE2 = $(GHC_COMPILER_DIR)/stage2/ghc-inplace
+GHC_STAGE3 = $(GHC_COMPILER_DIR)/stage3/ghc-inplace
+
+ifneq "$(findstring YES, $(UseStage1) $(BootingFromHc))" ""
+
+# We are using the stage1 compiler to compile Haskell code, set up
+# some variables appropriately:
+HC =$(GHC_STAGE1)
+MKDEPENDHS =$(GHC_STAGE1)
+GhcVersion = @ProjectVersion@
+GhcPatchLevel = @ProjectPatchLevel@
+# oops, these are wrong:
GhcMajVersion = @GhcMajVersion@
GhcMinVersion = @GhcMinVersion@
+
+ghc_ge_504 = YES
+ghc_ge_601 = YES
+ghc_ge_602 = YES
+ghc_ge_603 = YES
+ghc_ge_605 = YES
+
+else # not UseStage1 or BootingFromHc
+
+HC = @WithHc@
+MKDEPENDHS = $(GHC)
+GhcVersion = @GhcVersion@
GhcPatchLevel = @GhcPatchLevel@
+GhcMajVersion = @GhcMajVersion@
+GhcMinVersion = @GhcMinVersion@
+
+# Some useful GHC version predicates:
+ghc_ge_504 = @ghc_ge_504@
+ghc_ge_601 = @ghc_ge_601@
+ghc_ge_602 = @ghc_ge_602@
+ghc_ge_603 = @ghc_ge_603@
+ghc_ge_605 = @ghc_ge_605@
+endif
# Canonicalised ghc version number, used for easy (integer) version
# comparisons. We must expand $(GhcMinVersion) to two digits by
GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion)
endif
-HBC = @HBC@
-NHC = @NHC@
-
-HC = @WithHc@
-MKDEPENDHS = $(GHC)
-
-# Sometimes we want to invoke ghc from the build tree in different
-# projects (eg. it's handy to have a nofib & a ghc build in the same
-# tree). We can refer to "this ghc" as $(GHC_INPLACE):
-
-GHC_INPLACE = $(FPTOOLS_TOP)/ghc/compiler/ghc-inplace
-GHC_STAGE1 = $(FPTOOLS_TOP)/ghc/compiler/stage1/ghc-inplace
-GHC_STAGE2 = $(FPTOOLS_TOP)/ghc/compiler/stage2/ghc-inplace
-GHC_STAGE3 = $(FPTOOLS_TOP)/ghc/compiler/stage3/ghc-inplace
-
#-----------------------------------------------------------------------------
# C compiler
#
SRC_CC_OPTS += -G0
endif
-# Solaris2 strikes again.
-unix_SRC_HSC2HS_OPTS += @unix_SRC_HSC2HS_OPTS@
-
#-----------------------------------------------------------------------------
# GMP Library (version 2.0.x or above)
#
HaveLibGmp = @HaveLibGmp@
LibGmp = @LibGmp@
-#-----------------------------------------------------------------------------
-# Mingwex Library
-#
-HaveLibMingwEx = @HaveLibMingwEx@
+GMP_INCLUDE_DIRS=@GMP_INCLUDE_DIRS@
+GMP_LIB_DIRS=@GMP_LIB_DIRS@
#-----------------------------------------------------------------------------
-# HaskellSupport framework (Mac OS X)
+# GMP framework (Mac OS X)
#
-HaveFrameworkHaskellSupport = @HaveFrameworkHaskellSupport@
+HaveFrameworkGMP = @HaveFrameworkGMP@
#-----------------------------------------------------------------------------
-# Regex library
-# (if present in libc use that one, otherwise use the one in the tree)
+# Mingwex Library
#
-HavePosixRegex = @HavePosixRegex@
-
-#-----------------------------------------------------------------------------
-# GTK+
-
-GTK_CONFIG = @GTK_CONFIG@
+HaveLibMingwEx = @HaveLibMingwEx@
#-----------------------------------------------------------------------------
# Flex (currently unused, could be moved to glafp-utils)
#
RAWCPP_FLAGS = -undef -traditional
FIND = @FindCmd@
+SORT = @SortCmd@
INSTALL = @INSTALL@
#
# Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
SED = @SedCmd@
SHELL = /bin/sh
+LD = @LdCmd@
+
# Some ld's support the -x flag and some don't, so the configure
# script detects which we have and sets LdXFlag to "-x" or ""
# respectively.
-LD = @LdCmd@
LD_X = @LdXFlag@
+# GNU ld supports input via a linker script, which is useful to avoid
+# overflowing command-line length limits.
+LdIsGNULd = @LdIsGNULd@
+
#
# In emergency situations, REAL_SHELL is used to perform shell commands
# from within the ghc driver script, by scribbling the command line to
# The reason for having to do this is that overly long command lines
# cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
# 2.5.1), which is why this backdoor is provided. The situation of overly
-# long command lines is either encountered while doing `make boot' in ghc/compiler,
+# long command lines is either encountered while doing `make boot' in compiler/,
# or when linking the compiler binary (`hsc').
#
# We do not use SHELL to execute long commands, as `make' will more than likely
TROFF = troff
UNAME = uname
-#-----------------------------------------------------------------------------
-# SGML stuff
-
-JADE = @JadeCmd@
-
-SGML2DVI = $(DOCBOOK_PREFIX)db2dvi
-SGML2HTML = $(DOCBOOK_PREFIX)db2html
-SGML2PS = $(DOCBOOK_PREFIX)db2ps
-SGML2PDF = $(DOCBOOK_PREFIX)db2pdf
-SGML2RTF = $(DOCBOOK_PREFIX)db2rtf
-
-SGMLSTYLESHEET = $(FPTOOLS_TOP_ABS)/docs/fptools-both.dsl
-
-SRC_SGML2DVI_OPTS = -d $(SGMLSTYLESHEET)
-SRC_SGML2HTML_OPTS = -d $(SGMLSTYLESHEET)
-SRC_SGML2PS_OPTS = -d $(SGMLSTYLESHEET)
-SRC_SGML2RTF_OPTS = -d $(SGMLSTYLESHEET)
-SRC_SGML2PDF_OPTS = -d $(SGMLSTYLESHEET)
-
-DOCBOOK_CATALOG = @Catalog@
+# GTK+
+GTK_CONFIG = @GTK_CONFIG@
#-----------------------------------------------------------------------------
# DocBook XML stuff
#-----------------------------------------------------------------------------
# FPtools support software
-# Stuff from fptools/glafp-utils
-MKDEPENDC = $(MKDEPENDC_PREFIX)mkdependC
-LTX = $(LTX_PREFIX)ltx
-MKDIRHIER = $(MKDIRHIER_PREFIX)mkdirhier
-LNDIR = $(LNDIR_PREFIX)lndir
-ETAGS = $(ETAGS_PREFIX)etags
-VERBATIM = $(VERBATIM_PREFIX)verbatim
-SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb
-RUNTEST = $(RUNTEST_PREFIX)runstdtest
-LX = @LxCmd@
-
BLD_DLL = dllwrap
#
# Haddock
#
HADDOCK = @HaddockCmd@
-HADDOCK_INPLACE = $(HADDOCK_PREFIX)/src/haddock-inplace
-
-#
-# Stuff from fptools/literate
-#
-LIT2PGM = $(LITERATE_PREFIX)lit2pgm
-LIT2HTML = $(LITERATE_PREFIX)lit2html
-LIT2LATEX = $(LITERATE_PREFIX)lit2latex
-MKDEPENDLIT = $(LITERATE_PREFIX)mkdependlit
-LIT2CHANGELOG = $(LITERATE_PREFIX)lit2changelog
-LIT2TEXT = $(LITERATE_PREFIX)lit2text
-
-#
-# Stuff from fptools/ghc/utils
-#
-UNLIT = $(UNLIT_PREFIX)unlit$(exeext)
-HP2PS = $(HP2PS_PREFIX)hp2ps$(exeext)
-HSTAGS = $(HSTAGS_PREFIX)hasktags
-HSC2HS = $(HSC2HS_PREFIX)hsc2hs-inplace
#
-# Options for the compiling different `ways'. Various projects within
-# the glorious fptools tree support building in various user-configured
-# ways. For instance, you could set up one `way' such that the prelude
-# libraries all were built with the option -ffoldr-build-on.
+# Options for compiling in different `ways'.
#
# To configure up your own way, have a look at some of the standard ways
# such as profiling, and create your own set of WAY_*_OPTS defs below.
#
#
-# IMPORTANT! The WAYS variable configures the different `ways'
-# you want to build a project (or maybe just parts of it, as is
-# the case for ghc/). This variable is intended set inside the
-# project mk setup, enforcing a global fptools WAYS is a bit too
-# much (do you *really* want to build glafp-utils the profiled-concurrent
-# way?)
-#
-
-#
# Definitions of the different ways:
#
# * their name:
# The following ways currently have treated specially, p u t mg,
# as the driver script treats these guys specially and needs to carefully be told
# about the options for these. Hence, we hide the required command line options
-# for these in the ghc/driver, as this is the only place they are needed.
+# for these in the driver, as this is the only place they are needed.
#
# If you want to add to these default options, fill in the variables below:
WAY_u_NAME=unregisterized (using portable C only)
WAY_u_HC_OPTS=-unreg
-# Way `s':
-WAY_s_NAME=threads (for SMP)
-WAY_s_HC_OPTS=-smp
-
# Way `mp':
WAY_mp_NAME=parallel
WAY_mp_HC_OPTS=-parallel
WAY_debug_p_NAME=debug profiled
WAY_debug_p_HC_OPTS=-optc-DDEBUG -prof
+# Way 'debug_u':
+WAY_debug_u_NAME=debug unregisterised
+WAY_debug_u_HC_OPTS=-optc-DDEBUG -unreg
+
# Way 'thr_debug':
WAY_thr_debug_NAME=threaded
WAY_thr_debug_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG
projects / ghc-hetmet.git / blobdiff