# random .o-file stuff might change even if the .hi syntax doesn't
ProjectName = @ProjectName@
-ProjectVersion = @ProjectVersion@
+ProjectTags =
+ProjectVersion = @ProjectVersion@$(ProjectTags)
ProjectVersionInt = @ProjectVersionInt@
ProjectPatchLevel = @ProjectPatchLevel@
# Pin a suffix on executables? If so, what (Windows only).
exeext=@exeext@
+soext=@soext@
# Windows=YES if on a Windows platform
ifneq "$(findstring $(HostOS_CPP), mingw32 cygwin32)" ""
GhcStage2HcOpts=
GhcStage3HcOpts=
+GhcProfiled=NO
+GhcDebugged=NO
+
# Build a compiler that will build *unregisterised* libraries and
# binaries by default. Unregisterised code is supposed to compile and
# run without any support for architecture-specific assembly mangling,
ArchSupportsNCG=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc)))
OsSupportsNCG=$(strip $(patsubst $(HostOS_CPP), YES, $(patsubst aix,,$(HostOS_CPP))))
-ifeq "$(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)" "YESYESNO"
-GhcWithNativeCodeGen=YES
-else
-GhcWithNativeCodeGen=NO
-endif
+# lazy test, because $(GhcUnregisterised) might be set in build.mk later.
+GhcWithNativeCodeGen=$(strip\
+ $(if $(filter YESYESNO,\
+ $(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)),YES,NO))
# Include support for generating Java
GhcWithJavaGen=NO
HaveLibDL = @HaveLibDL@
+# ArchSupportsSMP should be set iff there is support for that arch in
+# includes/SMP.h
+ArchSupportsSMP=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 sparc powerpc)))
+
+# lazy test, because $(GhcUnregisterised) might be set in build.mk later.
+GhcWithSMP=$(strip $(if $(filter YESNO, $(ArchSupportsSMP)$(GhcUnregisterised)),YES,NO))
+
# Whether to include GHCi in the compiler. Depends on whether the RTS linker
# has support for this OS/ARCH combination.
GhcWithInterpreter=NO
endif
+# GhcEnableTablesNextToCode tells us whether the target architecture
+# supports placing info tables directly before the entry code
+# (see TABLES_NEXT_TO_CODE in the RTS). Whether we actually compile for
+# TABLES_NEXT_TO_CODE depends on whether we're building unregisterised
+# code or not, which may be decided by options to the compiler later.
+ifneq "$(findstring $(TargetArch_CPP)X, ia64X powerpc64X)" ""
+GhcEnableTablesNextToCode=NO
+else
+GhcEnableTablesNextToCode=YES
+endif
+
+# On Windows we normally want to make a relocatable bindist, to we
+# ignore flags like libdir
+ifeq "$(Windows)" "YES"
+RelocatableBuild = YES
+else
+RelocatableBuild = NO
+endif
+
+# When building bindists we set this to yes so that the binaries are as
+# portable as possible.
+BeConservative = NO
+
#
# Building various ways?
# (right now, empty if not).
HscIfaceFileVersion=6
+MakefileDeps=YES
+
#------------------------------------------------------------------------------
# Options for Libraries
# debug_u : debugging unregisterised
# thr_debug : debugging threaded
# thr_debug_p : debugging threaded profiled
+# t : ticky-ticky profiling
+# debug_t : debugging ticky-ticky profiling
#
-ifeq "$(BootingFromHc)" "YES"
GhcRTSWays=
-else
-GhcRTSWays=thr thr_p debug thr_debug
+
+# Usually want the debug version
+ifeq "$(BootingFromHc)" "NO"
+GhcRTSWays += debug
endif
+# Want the threaded versions unless we're unregisterised
+# Defer the check until later by using $(if..), because GhcUnregisterised might
+# be set in build.mk, which hasn't been read yet.
+GhcRTSWays += $(if $(findstring NO, $(GhcUnregisterised)),thr thr_p thr_debug,)
+
+# We can only build GHCi threaded if we have a threaded RTS:
+GhcThreaded = $(if $(findstring thr,$(GhcRTSWays)),YES,NO)
+
# Option flags to pass to GHC when it's compiling modules in
# fptools/libraries. Typically these are things like -O or
# -dcore-lint or -H32m. The ones that are *essential* are wired into
#
StripLibraries=NO
+# These are the URL patterns that Haddock uses to generate the "Source
+# File" links on each page.
+CorePackageSourceURL = http://darcs.haskell.org/ghc-6.6/packages/$(PACKAGE)/%{FILE}
+ExtraPackageSourceURL = http://darcs.haskell.org/packages/$(PACKAGE)/%{FILE}
+
+# These are the packages required to be present in order to bootstrap GHC
+# NB. must be synced with libraries/core-packages
+CorePackages = base Cabal haskell98 readline regex-base regex-compat \
+ regex-posix parsec stm template-haskell unix Win32
# ----------------------------------------------------------------------------
# Object-file splitting
# Don't use -split-objs in in GhcLibHcOpts, because the build
# system needs to do other special magic if you are
# doing object-file splitting
-ifneq "$(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc)" ""
-SplitObjs=YES
-else
-SplitObjs=NO
-endif
-# Don't split object files for libs if we're building DLLs, or booting from
-# .hc files.
-ifeq "$(DLLized)" "YES"
-SplitObjs=NO
-endif
-ifeq "$(BootingFromHc)" "YES"
-SplitObjs=NO
-endif
-ifeq "$(GhcUnregisterised)" "YES"
-SplitObjs=NO
-endif
-ifeq "$(TargetArch_CPP)" "ia64"
-SplitObjs=NO
-endif
+# lazy test, so that $(GhcUnregisterised) can be set in build.mk
+SplitObjs=$(strip $(if $(filter $(TargetArch_CPP),i386 x86_64 powerpc sparc),\
+ $(if $(filter YES,$(BootingFromHC)),\
+ NO,\
+ $(if $(filter NO,$(GhcUnregisterised)),\
+ YES,\
+ NO)),\
+ NO))
# Math library
LIBM=@LIBM@
# Include the front panel code? Needs GTK+.
GhcRtsWithFrontPanel = NO
+# Include support for CPU performance counters via the PAPI library in the RTS?
+# (PAPI: http://icl.cs.utk.edu/papi/)
+GhcRtsWithPapi = NO
+HavePapi = @HavePapi@
+
################################################################################
#
# nofib
DEFAULT_TMPDIR = /tmp
ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
-DEFAULT_TMPDIR = C:/TEMP
+DEFAULT_TMPDIR = /C/TEMP
endif
ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
-DEFAULT_TMPDIR = C:/TEMP
+DEFAULT_TMPDIR = /C/TEMP
endif
-# FPTOOLS_TOP: the top of the fptools hierarchy, absolute path. (POSIX / unix-style path).
+# FPTOOLS_TOP: the top of the fptools hierarchy, absolute path.
+# On Windows this is a c:/foo/bar style path.
FPTOOLS_TOP_ABS = @hardtop@
-# The platform specific version of 'hardtop'.
-FPTOOLS_TOP_ABS_PLATFORM = @hardtop_plat@
-#
-# Installation directories, we don't use half of these,
-# but since the configure script has them on offer while
-# passing through, we might as well set them.
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-bindir = @bindir@
-datadir0 = @datadir@
-libdir0 = @libdir@
-includedir = @includedir@
-oldincludedir = @oldincludedir@
-mandir = @mandir@
+BIN_DIST_NAME=ghc-$(ProjectVersion)
+BIN_DIST_TOPDIR_REL=$(FPTOOLS_TOP)
+BIN_DIST_TOPDIR_ABS=$(FPTOOLS_TOP_ABS)
+BIN_DIST_DIR=$(BIN_DIST_TOPDIR_ABS)/$(BIN_DIST_NAME)
+BIN_DIST_TARBALL=$(BIN_DIST_TOPDIR_REL)/$(BIN_DIST_NAME)-$(TARGETPLATFORM).tar.bz2
+
+BIN_DIST_INST_DIR = $(FPTOOLS_TOP_ABS)/bindisttest/installed
+
+# Definition of installation directories, we don't use half of these, but since
+# the configure script has them on offer while passing through, we might as well
+# set them. Note that we have to be careful, because the GNU coding standards
+# have changed a bit over the course of time, and autoconf development reflects
+# this.
+#
+# A little bit of history regarding autoconf and GNU coding standards, use this
+# as a cheat-sheet for the stuff below:
+#
+# variable | default < 2.60 | default >= 2.60
+# ------------+--------------------+--------------------------------------
+# exec_prefix | ${prefix} | ${prefix}
+# libdir | ${exec_prefix}/lib | ${exec_prefix}/lib
+# datarootdir | NONE! | ${prefix}/share
+# datadir | ${prefix}/share | ${datarootdir}
+# infodir | ${prefix}/info | ${datarootdir}/info
+# mandir | ${prefix}/man | ${datarootdir}/man
+# docdir | NONE! | ${datarootdir}/doc/${PACKAGE_TARNAME}
+# htmldir | NONE! | ${docdir}
+# dvidir | NONE! | ${docdir}
+# pdfdir | NONE! | ${docdir}
+# psdir | NONE! | ${docdir}
+#
+# NOTE: The default e.g. ${docdir} above means that autoconf substitutes the
+# string "${docdir}", not the value of docdir! This is crucial for the GNU
+# coding standards.
+
+# This gets used in the default docdir when autoconf >= 2.60 is used
+PACKAGE_TARNAME := @PACKAGE_TARNAME@
+
+prefix := @prefix@
+
+# New autoconf (>= 2.60?) make a configure with a --datarootdir=DIR flag.
+# However, in order to support older autoconf's we don't use it.
+# datarootdir is set lower down instead.
+# But, as datadir is defined in terms of datarootdir, we also need to
+# set it to the value (if any) that configure gives it here.
+datarootdir := @datarootdir@
+
+exec_prefix := @exec_prefix@
+bindir := @bindir@
+datadir0 := @datadir@
+libdir0 := @libdir@
+includedir := @includedir@
+mandir := @mandir@
ifeq "$(Windows)" "YES"
-ifeq "$(strip $(prefix))" ""
-prefix = c:/ghc
-endif
-
# Hack: our directory layouts tend to be different on Windows, so
# hack around configure's bogus assumptions here.
-datadir = $(prefix)
-libdir = $(prefix)
+datarootdir := $(prefix)
+datadir := $(prefix)
+libdir := $(prefix)
else
-#
# Unix: override libdir and datadir to put ghc-specific stuff in
# a subdirectory with the version number included.
-#
-libdir = $(libdir0)/ghc-$(ProjectVersion)
-datadir = $(datadir0)/ghc-$(ProjectVersion)
+datarootdir := $(datadir0)
+datadir := $(datadir0)/ghc-$(ProjectVersion)
+libdir := $(libdir0)/ghc-$(ProjectVersion)
endif # Windows
+headerdir := $(libdir)/include
+
+# New autoconf (>= 2.60?) make a configure with --docdir=DIR etc flags.
+# However, in order to support older autoconf's we don't use them.
+
+#docdir := @docdir@
+#htmldir := @htmldir@
+#dvidir := @dvidir@
+#pdfdir := @pdfdir@
+#psdir := @psdir@
+
+docdir := $(datarootdir)/doc/ghc
+htmldir := $(docdir)
+dvidir := $(docdir)
+pdfdir := $(docdir)
+psdir := $(docdir)
+
# Default place for putting interface files is $(libdir)
# (overriden for packages in package.mk)
ifacedir = $(libdir)
-#
-# Default values for most of the above are only set if
-# they weren't configured to anything in particular
-# via the configure script. (i.e., we make no assumption
-# that the autoconf-generated script will assign defaults
-# to all of the above).
-#
-ifeq "$(strip $(exec_prefix))" ""
-exec_prefix = $(prefix)
-endif
-ifeq "$(strip $(bindir))" ""
-bindir = $(exec_prefix)/bin
-endif
-
-#
# NOTE: by intention, libexecdir and libdir point to
# the same place.
# => Only way to override this is to set libexecdir= on the command line.
# (NOTE: configure script setting is ignored).
libexecdir = $(libdir)
-ifeq "$(strip $(datadir))" ""
-datadir = $(prefix)/share
-endif
-ifeq "$(strip $(libdir))" ""
-libdir = $(exec_prefix)/lib
-endif
-ifeq "$(strip $(includedir))" ""
-includedir = $(prefix)/include
-endif
-ifeq "$(strip $(oldincludedir))" ""
-oldincludedir = /usr/include
-endif
-ifeq "$(strip $(mandir))" ""
-mandir = $(prefix)/man
-endif
+# This is a bit of a lie, as this is a wrapper rather than the program
+# itself. However, it means that we don't have to worry about Windows
+# and non-Windows having different extensions.
+GHC_PKG_PROG = $(FPTOOLS_TOP_ABS)/$(GHC_PKG_DIR_REL)/ghc-pkg-inplace
#-----------------------------------------------------------------------------
# install configuration
INSTALL_SCRIPT = $(INSTALL) -m 755
INSTALL_SHLIB = $(INSTALL) -m 755
INSTALL_DATA = $(INSTALL) -m 644
+INSTALL_HEADER = $(INSTALL) -m 644
+INSTALL_MAN = $(INSTALL) -m 644
INSTALL_DIR = $(MKDIRHIER)
# -----------------------------------------------------------------------------
# xxx the executable relative to the current dir
GHC_UNLIT_PGM = unlit$(exeext)
+GHC_HP2PS_PGM = hp2ps
GHC_HSTAGS_PGM = hasktags
GHC_HSC2HS_INPLACE_PGM = hsc2hs-inplace
GHC_TOUCHY_PGM = touchy$(exeext)
endif
UNLIT = $(GHC_UNLIT_DIR)/$(GHC_UNLIT_PGM)
+HP2PS = $(GHC_HP2PS_DIR)/$(GHC_HP2PS_PGM)
HSTAGS = $(GHC_HSTAGS_DIR)/$(GHC_HSTAGS_PGM)
HSC2HS_INPLACE = $(GHC_HSC2HS_DIR)/$(GHC_HSC2HS_INPLACE_PGM)
MANGLER = $(GHC_MANGLER_DIR)/$(GHC_MANGLER_PGM)
LNDIR = $(GHC_LNDIR_DIR)/$(GHC_LNDIR_PGM)
RUNTEST = $(GHC_RUNTEST_DIR)/$(GHC_RUNTEST_PGM)
+GENERATED_FILE = chmod a-w
+EXECUTABLE_FILE = chmod +x
+
#-----------------------------------------------------------------------------
# Haskell compilers and mkdependHS
GhcMajVersion = @GhcMajVersion@
GhcMinVersion = @GhcMinVersion@
-ghc_ge_504 = YES
ghc_ge_601 = YES
ghc_ge_602 = YES
ghc_ge_603 = YES
+ghc_ge_605 = YES
+ghc_ge_607 = YES
else # not UseStage1 or BootingFromHc
GhcMinVersion = @GhcMinVersion@
# Some useful GHC version predicates:
-ghc_ge_504 = $(shell if (test $(GhcCanonVersion) -ge 504); then echo YES; else echo NO; fi)
-ghc_ge_601 = $(shell if (test $(GhcCanonVersion) -ge 601); then echo YES; else echo NO; fi)
-ghc_ge_602 = $(shell if (test $(GhcCanonVersion) -ge 602); then echo YES; else echo NO; fi)
-ghc_ge_603 = $(shell if (test $(GhcCanonVersion) -ge 603); then echo YES; else echo NO; fi)
+ghc_ge_601 = @ghc_ge_601@
+ghc_ge_602 = @ghc_ge_602@
+ghc_ge_603 = @ghc_ge_603@
+ghc_ge_605 = @ghc_ge_605@
+ghc_ge_607 = @ghc_ge_607@
endif
# Canonicalised ghc version number, used for easy (integer) version
HaveLibGmp = @HaveLibGmp@
LibGmp = @LibGmp@
+GMP_INCLUDE_DIRS=@GMP_INCLUDE_DIRS@
+GMP_LIB_DIRS=@GMP_LIB_DIRS@
+
#-----------------------------------------------------------------------------
# GMP framework (Mac OS X)
#
# GTK+
GTK_CONFIG = @GTK_CONFIG@
+# Set this if you want to use Inno Setup to build a Windows installer
+# when you make a bindist
+ISCC =
+
#-----------------------------------------------------------------------------
# DocBook XML stuff
WAY_debug_u_NAME=debug unregisterised
WAY_debug_u_HC_OPTS=-optc-DDEBUG -unreg
+# Way 'debug_t':
+WAY_debug_t_NAME=debug ticky-ticky profiling
+WAY_debug_t_HC_OPTS= -ticky -optc-DDEBUG
+
# Way 'thr_debug':
WAY_thr_debug_NAME=threaded
WAY_thr_debug_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG
WAY_thr_debug_p_NAME=threaded
WAY_thr_debug_p_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -prof
+# Way 'dyn': build dynamic shared libraries
+WAY_dyn_NAME=dyn
+WAY_dyn_HC_OPTS=-fPIC -dynamic
+WAY_dyn_LIB_TARGET=libHSrts-gcc661.so
+
+# Way 'thr_dyn':
+WAY_thr_dyn_NAME=thr_dyn
+WAY_thr_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS
+
+# Way 'thr_debug_dyn':
+WAY_thr_debug_dyn_NAME=thr_dyn
+WAY_thr_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS -optc-DDEBUG
+
+# Way 'debug_dyn':
+WAY_debug_dyn_NAME=thr_dyn
+WAY_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DDEBUG
+
#
# Add user-way configurations here:
#
# GhcLibCppOpts += -DWORD_SIZE_IN_BITS=31
# SplitObjs=NO
+################################################################################
+#
+# Library configure arguments
+#
+################################################################################
+
+CONFIGURE_ARGS = @CONFIGURE_ARGS@
+
projects / ghc-hetmet.git / blobdiff