X-Git-Url: http://git.megacz.com/?p=ghc-hetmet.git;a=blobdiff_plain;f=Makefile;h=0929f284ca20b903733b7d9eca5756caf91af4c1;hp=bceef035b8d1fa8a0cec0c795986f02dc645023f;hb=HEAD;hpb=3b22ea4e028b413cd547c79bea6b690c7efb9163 diff --git a/Makefile b/Makefile index bceef03..0929f28 100644 --- a/Makefile +++ b/Makefile @@ -1,562 +1,118 @@ -############################################################################ -# -# This is the top-level Makefile for GHC -# -# Targets: -# -# bootstrap (DEFAULT) -# Builds GHC, then builds the libraries, -# then uses this GHC ("stage 1") to build itself -# ("stage 2"). -# -# bootstrap2 -# Same as bootstrap -# -# bootstrap3 -# bootstrap2 + we build GHC one more time ("stage 3") -# -# stage1 -# Just build up to stage 1 -# -# stage2 -# Just build stage 2 (stage 1 must be built) -# -# stage3 -# Just build stage 3 (stage 2 must be built) -# -# all -# Same as bootstrap -# -# install -# Install everything, including stage 2 compiler by default -# (override with stage=3, for example). -# -# dist -# Make a source dist (WARNING: runs 'make distclean' first) -# -# binary-dist -# Builds a binary distribution -# -# hc-file-bundle -# Builds an HC-file bundle, for bootstrapping -# -# clean, distclean, maintainer-clean -# Increasing levels of cleanliness +# ----------------------------------------------------------------------------- # -############################################################################ - -TOP=. -include $(TOP)/mk/boilerplate.mk - +# (c) 2009 The University of Glasgow # -# Order is important! It's e.g. necessary to descend into include/ -# before the rest to have a config.h, etc. +# This file is part of the GHC build system. # -# If we're booting from .hc files, swap the order -# we descend into subdirs - to boot utils must be before driver. +# To understand how the build system works and how to modify it, see +# http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture +# http://hackage.haskell.org/trac/ghc/wiki/Building/Modifying # -.PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3 - -# We can't 'make boot' in libraries until stage1 is built -ifeq "$(BootingFromHc)" "YES" -SUBDIRS_BUILD = gmp includes rts compat compiler docs utils driver -else -SUBDIRS_BUILD = gmp includes compat utils driver docs compiler rts libraries/Cabal/doc -endif - -SUBDIRS = gmp includes compat utils driver docs rts libraries compiler libraries/Cabal/doc - -# Sanity check that all the boot libraries are in the tree, to catch -# failure to run darcs-all. -check-packages : - @ds=`cat libraries/boot-packages`;\ - for d in $$ds; do \ - if test ! -d libraries/$$d; then \ - echo "Looks like you're missing libraries/$$d,"; \ - echo "maybe you haven't done './darcs-all get'?"; \ - exit 1; \ - fi \ - done - @if test ! -f libraries/base/configure; then \ - echo "Looks like you're missing base's configure script."; \ - echo "Did you run 'sh boot' at the top level?"; \ - exit 1; \ - fi - -ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" -ifneq "$(WhatGccIsCalled)" "" -GCC_LIB_DEP = stamp.inplace-gcc-lib -endif -endif - -stage1 : $(GCC_LIB_DEP) check-packages - $(MAKE) -C utils/mkdependC boot - @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \ - for i in $(SUBDIRS_BUILD); do \ - echo "------------------------------------------------------------------------"; \ - echo "== $(MAKE) boot $(MFLAGS);"; \ - echo " in $(shell pwd)/$$i"; \ - echo "------------------------------------------------------------------------"; \ - $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \ - if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ - done; \ - for i in $(SUBDIRS_BUILD); do \ - echo "------------------------------------------------------------------------"; \ - echo "== $(MAKE) all $(MFLAGS);"; \ - echo " in $(shell pwd)/$$i"; \ - echo "------------------------------------------------------------------------"; \ - $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \ - if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ - done - $(MAKE) -C libraries boot - $(MAKE) -C libraries all - -stage2 : check-packages - $(MAKE) -C compiler boot stage=2 - $(MAKE) -C compiler stage=2 - -stage3 : check-packages - $(MAKE) -C compiler boot stage=3 - $(MAKE) -C compiler stage=3 - -bootstrap : bootstrap2 - -bootstrap2 : stage1 - $(MAKE) stage2 - -bootstrap3 : bootstrap2 - $(MAKE) stage3 - -ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" -ifneq "$(WhatGccIsCalled)" "" -all :: stamp.inplace-gcc-lib - -.PHONY: stamp.inplace-gcc-lib - -# This is a hack to make Cabal able to find ld when we run tests with -# the inplace ghc. We should probably install all the gcc stuff in our -# tree somewhere, and then have install copy it from there rather than -# from the filesystem. -stamp.inplace-gcc-lib: - $(RM) -r compiler/gcc-lib - mkdir compiler/gcc-lib - cp $(LD) compiler/gcc-lib - touch $@ - -clean :: - $(RM) -r compiler/gcc-lib - $(RM) -f inplace-gcc-lib -endif -endif - -all :: bootstrap - # ----------------------------------------------------------------------------- -# Installing - -# We want to install the stage 2 bootstrapped compiler by default, but we let -# the user override this by saying 'make install stage=1', for example. -ifeq "$(stage)" "" -INSTALL_STAGE = stage=2 -else -INSTALL_STAGE = -endif - -install-strip: - $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install - -# Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too -install :: check-packages - @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \ - for i in $(SUBDIRS); do \ - echo "------------------------------------------------------------------------"; \ - echo "== $(MAKE) $@ $(MFLAGS);"; \ - echo " in $(shell pwd)/$$i"; \ - echo "------------------------------------------------------------------------"; \ - $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \ - if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ - done - -ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" -# These files need to be in the InstallShield -# INSTALL_DATAS rather than INSTALL_DOCS is used so these files go -# in the top-level directory of the distribution -INSTALL_DATAS += ANNOUNCE LICENSE README -endif - -# If installing on Windows with MinGW32, copy the gcc compiler, headers and libs -# and the perl interpreter and dll into the GHC prefix directory. -# Gcc and Perl source locations derived from configuration data. -ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" -ifneq "$(WhatGccIsCalled)" "" -install :: - -mkdir $(prefix)/gcc-lib - -mkdir $(prefix)/include - -mkdir $(prefix)/include/mingw - -cp -rp $(GccDir)../include/* $(prefix)/include/mingw - -cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib - -cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib - -cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib - -cp $(GccDir)../lib/*.* $(prefix)/gcc-lib - -cp $(GccDir)gcc.exe $(prefix) - -cp $(GccDir)as.exe $(prefix)/gcc-lib - -cp $(GccDir)ld.exe $(prefix)/gcc-lib - -cp $(GccDir)dllwrap.exe $(prefix)/gcc-lib - -cp $(GccDir)dlltool.exe $(prefix)/gcc-lib - -cp $(GhcDir)../perl.exe $(prefix) - -cp $(GhcDir)../perl56.dll $(prefix) -endif -endif - -# Install gcc-extra-opts -install :: - $(INSTALL_DIR) $(DESTDIR)$(libdir) - $(INSTALL_DATA) $(INSTALL_OPTS) extra-gcc-opts $(DESTDIR)$(libdir) - -install-docs :: - @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \ - for i in $(SUBDIRS); do \ - echo "------------------------------------------------------------------------"; \ - echo "== $(MAKE) $@ $(MFLAGS);"; \ - echo " in $(shell pwd)/$$i"; \ - echo "------------------------------------------------------------------------"; \ - $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \ - if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ - done - -# ----------------------------------------------------------------------------- -# Making a binary distribution -# -# `dist' `binary-dist' -# Create a distribution tar file for this program. The tar file -# should be set up so that the file names in the tar file start with -# a subdirectory name which is the name of the package it is a -# distribution for. This name can include the version number. -# -# For example, the distribution tar file of GCC version 1.40 unpacks -# into a subdirectory named `gcc-1.40'. -# -# The easiest way to do this is to create a subdirectory -# appropriately named, use ln or cp to install the proper files in -# it, and then tar that subdirectory. -# -# The dist target should explicitly depend on all non-source files -# that are in the distribution, to make sure they are up to date in -# the distribution. See Making Releases. -# -# binary-dist is a GHC addition for binary distributions -# - -binary-dist:: - -rm -rf $(BIN_DIST_DIR) - -$(RM) $(BIN_DIST_DIR).tar.gz - -# When making bindists, we can have problems if some things (e.g. ghc-pkg) -# are compiled with the bootstrapping compiler and some (e.g. the stage 2 -# compiler) with the stage1 compiler. See #1860 for an example. -# Thus we rebuild the utils with stage 1 here. This is a bit unpleasant, -# as binary-dist really shouldn't actually build anything, but it works. -# We need to do the same for utilities used during library package installation. -binary-dist:: - $(MAKE) -C utils clean - $(MAKE) -C utils UseStage1=YES boot - $(MAKE) -C utils UseStage1=YES - $(RM) -f libraries/ifBuildable/ifBuildable - $(MAKE) -C libraries UseStage1=YES ifBuildable/ifBuildable - $(RM) -f libraries/installPackage/installPackage - $(MAKE) -C libraries UseStage1=YES installPackage/installPackage -ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" +ifeq "$(wildcard distrib/)" "" -binary-dist:: - $(MAKE) prefix=$(BIN_DIST_DIR) install - $(MAKE) prefix=$(BIN_DIST_DIR) install-docs +# We're in a bindist -binary-dist:: - cd $(BIN_DIST_DIR) && $(SHELL) ../distrib/prep-bin-dist-mingw +.PHONY: default +default: + @echo 'Run "make install" to install' + @false -binary-dist:: - $(MKDIRHIER) $(BIN_DIST_DIR)/icons - cp distrib/hsicon.ico $(BIN_DIST_DIR)/icons +.PHONY: install show +install show: + $(MAKE) -r --no-print-directory -f ghc.mk $@ BINDIST=YES NO_INCLUDE_DEPS=YES else -BinDistDirs = includes compiler docs rts +default : all + @: -BIN_DIST_TOP= distrib/Makefile \ - distrib/configure-bin.ac \ - distrib/INSTALL \ - distrib/README \ - ANNOUNCE \ - LICENSE \ - install-sh \ - extra-gcc-opts.in \ - config.guess \ - config.sub \ - aclocal.m4 +# For help, type 'make help' +.PHONY: help +help : + @cat MAKEHELP -ifeq "$(darwin_TARGET_OS)" "1" -BIN_DIST_TOP+=mk/fix_install_names.sh +ifneq "$(findstring clean,$(MAKECMDGOALS))" "" +-include mk/config.mk +else +include mk/config.mk +ifeq "$(ProjectVersion)" "" +$(error Please run ./configure first) endif - -.PHONY: binary-dist-pre% binary-dist binary-pack - -binary-dist:: binary-dist-pre - -binary-dist-pre:: - $(MKDIRHIER) $(BIN_DIST_DIR)/mk - echo 'include $$(TOP)/Makefile-vars' > $(BIN_DIST_DIR)/mk/boilerplate.mk - echo 'include $$(TOP)/mk/package.mk' > $(BIN_DIST_DIR)/mk/target.mk - echo 'include $$(TOP)/mk/install.mk' >> $(BIN_DIST_DIR)/mk/target.mk - echo 'include $$(TOP)/mk/recurse.mk' >> $(BIN_DIST_DIR)/mk/target.mk - echo '' > $(BIN_DIST_DIR)/mk/compat.mk - cp mk/package.mk $(BIN_DIST_DIR)/mk/ - cp mk/install.mk $(BIN_DIST_DIR)/mk/ - cp mk/recurse.mk $(BIN_DIST_DIR)/mk/ - cp mk/fptools.css $(BIN_DIST_DIR)/mk/ - $(MKDIRHIER) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) - $(MKDIRHIER) $(BIN_DIST_DIR)/share - -binary-dist:: - $(MAKE) -C gmp binary-dist DOING_BIN_DIST=YES - $(MAKE) -C includes binary-dist DOING_BIN_DIST=YES - $(MAKE) -C compiler binary-dist DOING_BIN_DIST=YES $(INSTALL_STAGE) - $(MAKE) -C rts binary-dist DOING_BIN_DIST=YES - $(MAKE) -C driver binary-dist DOING_BIN_DIST=YES - $(MAKE) -C utils binary-dist DOING_BIN_DIST=YES - $(MAKE) -C docs binary-dist DOING_BIN_DIST=YES - $(MAKE) -C libraries binary-dist DOING_BIN_DIST=YES - $(MAKE) -C libraries/Cabal/doc binary-dist DOING_BIN_DIST=YES - -VARFILE=$(BIN_DIST_DIR)/Makefile-vars.in - -binary-dist:: - @for i in $(BIN_DIST_TOP); do \ - if test -f "$$i"; then \ - echo cp $$i $(BIN_DIST_DIR); \ - cp $$i $(BIN_DIST_DIR); \ - fi; \ - done; - @echo "Configuring the Makefile for this project..." - echo > $(VARFILE) - echo "package = ghc" >> $(VARFILE) - echo "version = $(ProjectVersion)" >> $(VARFILE) - echo "ProjectVersion = $(ProjectVersion)" >> $(VARFILE) - echo "HaveLibGmp = $(HaveLibGmp)" >> $(VARFILE) - echo "GhcLibsWithUnix = $(GhcLibsWithUnix)" >> $(VARFILE) - echo "GhcWithInterpreter = $(GhcWithInterpreter)" >> $(VARFILE) - echo "GhcHasReadline = $(GhcHasReadline)" >> $(VARFILE) - echo "BootingFromHc = $(BootingFromHc)" >> $(VARFILE) - echo "XMLDocWays = $(XMLDocWays)" >> $(VARFILE) - # We won't actually use xsltproc, but we need to know if it's "" or not - echo "XSLTPROC = $(XSLTPROC)" >> $(VARFILE) - echo "TARGETPLATFORM = $(TARGETPLATFORM)" >> $(VARFILE) - echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(VARFILE) - - cat distrib/Makefile-bin-vars.in >> $(VARFILE) - @echo "Generating a shippable configure script.." - $(MV) $(BIN_DIST_DIR)/configure-bin.ac $(BIN_DIST_DIR)/configure.ac - ( cd $(BIN_DIST_DIR); autoreconf ) endif -# Tar up the distribution and build a manifest -binary-dist :: tar-binary-dist - -.PHONY: tar-binary-dist -tar-binary-dist: - ( cd $(BIN_DIST_TOPDIR_ABS); tar cf - $(BIN_DIST_NAME) | bzip2 >$(BIN_DIST_TARBALL) ) - ( cd $(BIN_DIST_TOPDIR_ABS); bunzip2 -c $(BIN_DIST_TARBALL) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >bin-manifest-$(ProjectVersion) ) +include mk/custom-settings.mk -PUBLISH_FILES = $(BIN_DIST_TARBALL) +# No need to update makefiles for these targets: +REALGOALS=$(filter-out binary-dist binary-dist-prep bootstrapping-files framework-pkg clean clean_% distclean maintainer-clean show help test fulltest,$(MAKECMDGOALS)) -# Upload the distribution and documentation -ifneq "$(ISCC)" "" -WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-$(TARGETPLATFORM) -WINDOWS_INSTALLER = $(WINDOWS_INSTALLER_BASE)$(exeext) +# configure touches certain files even if they haven't changed. This +# can mean a lot of unnecessary recompilation after a re-configure, so +# here we cache the old versions of these files so we can restore the +# timestamps. +%.old: % + @set -x && test -f $@ && cmp -s $< $@ || cp -p $< $@ + touch -r $@ $< -PUBLISH_FILES += $(WINDOWS_INSTALLER) -binary-dist :: generate-windows-installer - -.PHONY: generate-windows-installer -generate-windows-installer :: - $(SED) "s/@VERSION@/$(ProjectVersion)/" distrib/ghc.iss | $(ISCC) /O. /F$(WINDOWS_INSTALLER_BASE) - +# NB. not the same as saying '%: ...', which doesn't do the right thing: +# it does nothing if we specify a target that already exists. +.PHONY: $(REALGOALS) +$(REALGOALS) all: mk/config.mk.old mk/project.mk.old compiler/ghc.cabal.old +ifneq "$(OMIT_PHASE_0)" "YES" + @echo "===--- building phase 0" + $(MAKE) -r --no-print-directory -f ghc.mk phase=0 phase_0_builds endif - -# Upload the distribution and documentation -ifneq "$(PublishLocation)" "" -publish :: - make publish-binary-dist 'prefix=$(BIN_DIST_INST_DIR)' +ifneq "$(OMIT_PHASE_1)" "YES" + @echo "===--- building phase 1" + $(MAKE) -r --no-print-directory -f ghc.mk phase=1 phase_1_builds endif + @echo "===--- building final phase" + $(MAKE) -r --no-print-directory -f ghc.mk phase=final $@ -.PHONY: publish-binary-dist -publish-binary-dist :: - @for f in $(PUBLISH_FILES); do \ - for i in 0 1 2 3 4 5 6 7 8 9; do \ - echo "Try $$i: $(PublishCp) $$f $(PublishLocation)/dist"; \ - if $(PublishCp) $$f $(PublishLocation)/dist; then break; fi; \ - done \ - done - -# You need to "make binddisttest" before publishing the docs, as it -# works by publish setting $(prefix) to inside the binddisttest -# directory so $(docdir) points to the right place. - -# We assume that Windows means Cygwin, as we can't just use docdir -# unchanged or rsync (really SSH?) thinks that c:/foo means /foo on -# the machine c. +binary-dist: binary-dist-prep +ifeq "$(mingw32_TARGET_OS)" "1" + mv bindistprep/*.exe . +endif + mv bindistprep/*.tar.bz2 . -ifeq "$(Windows)" "YES" -PUBLISH_DOCDIR = $(shell cygpath --unix $(docdir)) +binary-dist-prep: +ifeq "$(mingw32_TARGET_OS)" "1" + $(MAKE) -r --no-print-directory -f ghc.mk windows-binary-dist-prep + $(MAKE) -r --no-print-directory -f ghc.mk windows-installer else -PUBLISH_DOCDIR = $(docdir) + rm -f bindist-list + $(MAKE) -r --no-print-directory -f ghc.mk bindist BINDIST=YES + $(MAKE) -r --no-print-directory -f ghc.mk unix-binary-dist-prep endif -publish-binary-dist :: - $(PublishCp) -r $(PUBLISH_DOCDIR)/* $(PublishLocation)/docs - -binary-dist:: - @echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!" - -# ----------------------------------------------------------------------------- -# Building source distributions -# -# Do it like this: -# -# $ make -# $ make dist -# -# WARNING: `make dist' calls `make distclean' before tarring up the tree. -# - -.PHONY: dist +clean distclean maintainer-clean: + $(MAKE) -r --no-print-directory -f ghc.mk $@ CLEANING=YES + test ! -d testsuite || $(MAKE) -C testsuite $@ -# -# Directory in which we're going to build the src dist -# -SRC_DIST_NAME=ghc-$(ProjectVersion) -SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME) - -# -# Files to include in source distributions -# -SRC_DIST_DIRS += mk docs distrib bindisttest $(filter-out docs distrib libraries/Cabal/doc,$(SUBDIRS)) -SRC_DIST_FILES += \ - configure.ac config.guess config.sub configure \ - aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \ - ghc.spec.in extra-gcc-opts.in VERSION boot - -# ----------------------------------------------------------------------------- -# Source distributions +$(filter clean_%, $(MAKECMDGOALS)) : clean_% : + $(MAKE) -r --no-print-directory -f ghc.mk $@ CLEANING=YES -# A source dist is built from a complete build tree, because we -# require some extra files not contained in a darcs checkout: the -# output from Happy and Alex, for example. -# -# The steps performed by 'make dist' are as follows: -# - create a complete link-tree of the current build tree in /tmp -# - run 'make distclean' on that tree -# - remove a bunch of other files that we know shouldn't be in the dist -# - tar up first the extralibs package, then the main source package +bootstrapping-files show: + $(MAKE) -r --no-print-directory -f ghc.mk $@ -EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/libraries/%, $(shell cat libraries/extra-packages)) - -SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2 -SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2 - -VERSION : - echo $(ProjectVersion) >VERSION - -dist :: VERSION - -dist :: - $(RM) -rf $(SRC_DIST_DIR) - $(RM) $(SRC_DIST_NAME).tar.gz - mkdir $(SRC_DIST_DIR) - ( cd $(SRC_DIST_DIR) \ - && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \ - && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \ - && $(MAKE) distclean \ - && if test -f $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs; then $(CP) $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs libraries/haskell-src/Language/Haskell/ ; mv libraries/haskell-src/Language/Haskell/Parser.ly libraries/haskell-src/Language/Haskell/Parser.ly.source ; fi \ - && $(RM) -rf compiler/stage[123] mk/build.mk \ - && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \ - ) - tar chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL) - $(RM) -rf $(EXTRA_LIBS) - tar chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL) - -# Upload the distribution(s) -# Retrying is to work around buggy firewalls that corrupt large file transfers -# over SSH. -ifneq "$(PublishLocation)" "" -dist :: - @for i in 0 1 2 3 4 5 6 7 8 9; do \ - echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist"; \ - if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist; then break; fi\ - done - @for i in 0 1 2 3 4 5 6 7 8 9; do \ - echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist"; \ - if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist; then break; fi\ - done +ifeq "$(darwin_TARGET_OS)" "1" +framework-pkg: + $(MAKE) -C distrib/MacOS $@ endif -# ----------------------------------------------------------------------------- -# HC file bundles +# If the user says 'make A B', then we don't want to invoke two +# instances of the rule above in parallel: +.NOTPARALLEL: -hc-file-bundle : - $(RM) -r ghc-$(ProjectVersion) - $(LN_S) . ghc-$(ProjectVersion) - $(FIND) ghc-$(ProjectVersion)/compiler \ - ghc-$(ProjectVersion)/utils \ - ghc-$(ProjectVersion)/compat \ - ghc-$(ProjectVersion)/libraries -follow \ - \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go - for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \ - if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \ - echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \ - fi; \ - done; - for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \ - if test "x$$f" != "x"; then \ - echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \ - fi; \ - done; - echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go - echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go - echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go - echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go - echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go - tar czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go` - -# ----------------------------------------------------------------------------- -# Cleaning - -CLEAN_FILES += hc-files-to-go *-hc.tar.gz - -DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \ - ghc.spec docs/users_guide/ug-book.xml extra-gcc-opts - -# don't clean config.mk: it's needed when cleaning stuff later on -LATE_DIST_CLEAN_FILES += mk/config.mk - -# VERSION is shipped in a source dist -MAINTAINER_CLEAN_FILES += VERSION - -extraclean:: - $(RM) -rf autom4te.cache - -clean distclean :: - $(MAKE) -C bindisttest $@ - if test -d testsuite; then $(MAKE) -C testsuite $@; fi - -# ----------------------------------------------------------------------------- - -# Turn off target.mk's rules for 'all', 'boot' and 'install'. -NO_BOOT_TARGET=YES -NO_ALL_TARGET=YES -NO_INSTALL_TARGET=YES +endif -include $(TOP)/mk/target.mk +.PHONY: test +test: + $(MAKE) -C testsuite/tests/ghc-regress CLEANUP=1 OUTPUT_SUMMARY=../../../testsuite_summary.txt fast -# ----------------------------------------------------------------------------- +.PHONY: fulltest +fulltest: + $(MAKE) -C testsuite/tests/ghc-regress CLEANUP=1 OUTPUT_SUMMARY=../../../testsuite_summary.txt