X-Git-Url: http://git.megacz.com/?p=ghc-hetmet.git;a=blobdiff_plain;f=Makefile;h=449136969925b77d62b1cf389e41c292976f4f22;hp=ff8adb72aa117c56dcd7a9b835d25b5f68762a1d;hb=430453c5131592b6147a80202dc5f7fbe3f3d5fd;hpb=b39e447d1c0fcf612d51342f8e270973edfe7e28

diff --git a/Makefile b/Makefile
index ff8adb7..4491369 100644
--- a/Makefile
+++ b/Makefile
@@ -135,6 +135,7 @@ endif
 
 # Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too
 install :: check-packages
+	$(INSTALL_DIR) $(bindir)
 	@case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
 	for i in $(SUBDIRS); do \
 	  echo "------------------------------------------------------------------------"; \
@@ -248,10 +249,6 @@ BINARY_DIST_PRE_RULES=$(foreach d,$(BinDistDirs),binary-dist-pre-$d)
 binary-dist:: binary-dist-pre $(BINARY_DIST_PRE_RULES)
 
 binary-dist-pre::
-ifeq "$(BIN_DIST)" ""
-	@echo "WARNING: To run the binary-dist target, you need to set BIN_DIST=1 in mk/build.mk"
-	@false
-endif
 	-rm -rf $(BIN_DIST_DIR)
 	-$(RM) $(BIN_DIST_DIR).tar.gz
 	$(MKDIRHIER) $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)
@@ -291,30 +288,43 @@ binary-dist::
 	@echo "Generating a shippable configure script.."
 	$(MV) $(BIN_DIST_DIR)/configure-bin.ac $(BIN_DIST_DIR)/configure.ac
 	( cd $(BIN_DIST_DIR); autoconf )
+
+ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+binary-dist::
+	$(MKDIRHIER) $(BIN_DIST_DIR)/icons
+	cp distrib/hsicon.ico $(BIN_DIST_DIR)/icons
+endif
+
 #
 # binary dist'ing the documentation.  
 # The default documentation to build/install is given below; overrideable
 # via build.mk or the 'make' command-line.
+#
+# If BINDIST_DOC_WAYS is set, use that
+# If XMLDocWays is set, use that
+# Otherwise, figure out what we can build based on configure results
 
 ifndef BINDIST_DOC_WAYS
 
+ifneq "$(XMLDocWays)" ""
 BINDIST_DOC_WAYS = $(XMLDocWays)
-
-# ifneq "$(XSLTPROC)" ""
-# BINDIST_DOC_WAYS = html
-# ifneq "$(FOP)" ""
-# BINDIST_DOC_WAYS += ps pdf
-# else
-# ifneq "$(PDFXMLTEX)" ""
-# BINDIST_DOC_WAYS += pdf
-# endif
-# ifneq "$(XMLTEX)" ""
-# ifneq "$(DVIPS)" ""
-# BINDIST_DOC_WAYS += ps
-# endif # DVIPS
-# endif # XMLTEX
-# endif # FOP
-# endif # XSLTPROC
+else
+ifneq "$(XSLTPROC)" ""
+BINDIST_DOC_WAYS = html
+ifneq "$(FOP)" ""
+BINDIST_DOC_WAYS += ps pdf
+else
+ifneq "$(PDFXMLTEX)" ""
+BINDIST_DOC_WAYS += pdf
+endif
+ifneq "$(XMLTEX)" ""
+ifneq "$(DVIPS)" ""
+BINDIST_DOC_WAYS += ps
+endif # DVIPS
+endif # XMLTEX
+endif # FOP
+endif # XSLTPROC
+endif # XMLDocWays
 
 endif # BINDIST_DOC_WAYS
 
@@ -388,19 +398,46 @@ tar-binary-dist:
 	( cd $(BIN_DIST_TOPDIR); tar cf - $(BIN_DIST_NAME) | bzip2 >$(BIN_DIST_TARBALL) )
 	( cd $(BIN_DIST_TOPDIR); bunzip2 -c $(BIN_DIST_TARBALL) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >bin-manifest-$(ProjectVersion) )
 
+PUBLISH_FILES = $(BIN_DIST_TARBALL)
+
+# Upload the distribution and documentation
+ifneq "$(ISCC)" ""
+WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-$(TARGETPLATFORM)
+WINDOWS_INSTALLER = $(WINDOWS_INSTALLER)$(exeext)
+
+PUBLISH_FILES += $(WINDOWS_INSTALLER)
+
+binary-dist :: generate-windows-installer
+
+.PHONY: generate-windows-installer
+generate-windows-installer ::
+	$(SED) "s/@VERSION@/$(ProjectVersion)/" distrib/ghc.iss | $(ISCC) /O. /F$(WINDOWS_INSTALLER_BASE) -
+endif
+
 # Upload the distribution and documentation
 ifneq "$(PublishLocation)" ""
 binary-dist :: publish-binary-dist
 endif
 
 .PHONY: publish-binary-dist
-publish-binary-dist :
-	@for i in 0 1 2 3 4 5 6 7 8 9; do \
-		echo "Try $$i: $(PublishCp) $(BIN_DIST_TARBALL) $(PublishLocation)"; \
-		if $(PublishCp) $(BIN_DIST_TARBALL) $(PublishLocation); then break; fi\
+publish-binary-dist ::
+	@for f in $(PUBLISH_FILES); do \
+	    for i in 0 1 2 3 4 5 6 7 8 9; do \
+	        echo "Try $$i: $(PublishCp) $$f $(PublishLocation)/dist"; \
+	        if $(PublishCp) $$f $(PublishLocation)/dist; then break; fi; \
+	    done \
 	done
-	$(PublishCp) -r $(BIN_DIST_DIR)/share/html/* $(PublishLocation)/docs
 
+ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+# On Windows, we cannot use absoluate pathnames to rsync, because they look
+# like remote pathnames ("c:/foo/bar").  Also, the docs reside in doc/
+# rather than share/, due to prep-bin-dist-mingw.
+publish-binary-dist ::
+	$(PublishCp) -r $(FPTOOLS_TOP)/$(BIN_DIST_NAME)/doc/html/* $(PublishLocation)/docs
+else
+publish-binary-dist ::
+	$(PublishCp) -r $(BIN_DIST_DIR)/share/html/* $(PublishLocation)/docs
+endif
 
 binary-dist::
 	@echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"
@@ -477,12 +514,12 @@ dist ::
 ifneq "$(PublishLocation)" ""
 dist ::
 	@for i in 0 1 2 3 4 5 6 7 8 9; do \
-		echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)"; \
-		if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation); then break; fi\
+		echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist"; \
+		if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist; then break; fi\
 	done
 	@for i in 0 1 2 3 4 5 6 7 8 9; do \
-		echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)"; \
-		if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation); then break; fi\
+		echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist"; \
+		if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist; then break; fi\
 	done
 endif